pvc-u - esi.infocms.esi.info/media/documents/ipsf_pvcumanual_ml.pdf · 90 manual valves spears ball...

Unplasticised Polyvinyl Chloride (PVC-U) is the mostwidely used of all plastics used for pipe installations. It isrigid, versatile, and is suitable for both above or belowground installations.

It has excellent chemical resistance which, whencombined with smoothness of bore, eliminates build up ofscale and gives good flow characteristics. It is odourlessand tasteless, and is suitable for conveying potable waterand many food or dairy products.

PVC-U is suitable for use at temperatures from 0˚C to 60˚Cat a wide range of operating pressures, depending uponthe system chosen. It is lightweight and easy to install,using cold solvent welded joints which require no specialtools.

Pipe - Inch Size 28Solvent Cement, Primer, Cleaner 31

Plain Fittings - Inch Size 32Flanges - Inch Size 42

Adaptor Fittings - Inch Size 44Threaded Fittings - Inch Size 52

Solvent Cement, Primer, Cleaner 57Saddles - Inch Size 58

Clear Pipe & Fittings 62FlexFit Flexible Pipe & Fittings 64

Hose Insert Fittings 66Pipe - mm Size 68

Plain Fittings - mm Size 71Flanges - mm Size 77

Adaptor Fittings - mm Size 79Saddles - mm Size 84

Basket Strainer 86Ball Valve, Double Union 88

Ball Valve Brackets, Double Union 88Ball Valve, True Union 91

Ball Valve Brackets, True Union 92Dosing Valve 92

Ball Valve, Economy Compact 94Ball Valve, Economy Utility 94

Ball Valve, Single Union 95Ball Valve, Economy Double Union 97

Ball Valve, T-Port 98Ball Valve, L-Port 99

Butterfly Valve 104Diaphragm Valve 108

Plug Gate Valve 110Gauge Guard 110

Y-Pattern Valve 113Slide Gate Valve 114

Gate Valve 115Needle Valve 115

Non-Return Valve, Check 117Air Release Valve 118

Foot Valve 121Non-Return Valve, Wafer Check 122

Swing Check Valve 126Line Strainer 126

Y-Strainer 127Ball Valve, Electrically Actuated 128

Ball Valve, Pneumatically Actuated 131Ball Valve, T-Port, Electrically Actuated 134

Diaphragm Valve, Actuated 136Butterfly Valve, Electrically Actuated 140

Butterfly Valve, Pneumatically Actuated 142Pressure Reducing Valve 146

Pressure Relief Valve 150

application guide

section guide

standards and approvals

Temperature range 0˚C to 60˚CAbrasion resistantNon-toxic and taint freeRigid pipes - no special support neededIdeal for above and below ground useResistant to many inorganic chemicalsThreading possibleResistant to most solutions of acids, alkalis and saltsSizes from 1/4" to 24" and 10mm to 630mmNo special tools required for installationJointing by cold solvent welding or rubber ringmechanical joints

Not resistant to aromatic and chlorinatedhydrocarbons

✓✓✓✓✓✓✓✓✓✓✓

✗

We offer a wide range of systems to leading internationalstandards:

Pipe (inch sizes) : EN 1452: ASTM D 1785: ASTM D 2241

Pipe (mm sizes) : EN 1452: DIN 8061/2

Fittings (inch sizes) : BS 4346 Part 1: ASTM D2467: ASTM D 2466

Fittings (mm sizes) : DIN 8063Threaded Fittings : BS21/DIN 2199/ISO 727

: ASTM D 2464

Pipes, fittings and solvent cements are WRAS listed foruse in contact with cold potable water.

pvc-u

IPS Flow SystemsSeaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England

Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222E-mail: [email protected] Website: www.ipsflowsystems.com

88

manual valves

inch and mm sizesPraher Type S4 Ball Valve with Actuator Adaptor Kit

Praher Valve Bracket for Type S4 Ball Valve

3/8” 122.171 88.031/2” 122.172 89.643/4” 122.173 97.56

1” 122.174 108.9511/4” 122.175 143.6111/2” 122.176 157.87

2” 122.177 175.2021/2” 122.359 294.05

3” 122.761 343.584” 122.762 418.48

EPDM SealsSize Code Price

16 122.357 88.0320 122.358 89.6425 122.256 97.5632 122.238 108.9540 122.237 143.6150 122.257 157.8763 122.898 175.2075 122.359 294.0590 122.258 343.58

110 122.360 418.48

16 125.449 106.4620 125.450 106.9825 125.451 114.9032 122.804 126.2940 125.235 164.0650 125.452 178.3063 125.453 199.3675 125.381 335.5390 122.263 407.35

110 on application

3/8” 120.832 106.461/2” 120.833 106.983/4” 120.834 114.90

1” 120.835 126.2911/4” 120.836 164.0611/2” 120.837 178.30

2” 120.838 199.3621/2” 120.839 335.53

3” 120.840 407.354” 120.841 482.25

FPM SealsSize Code Price

Prices on request for BSP threaded sockets or PN10 flanged connections

Includes:PVC-U Ball Valve, PVC-U Valve Bracket,Console, ActuatorAdaptor, Screw Set,PVDF Shaft

3/8”/16 170.276 19.871/2”/20 170.276 19.873/4”/25 170.277 21.171”/32 170.278 22.4611/4”/40 170.229 23.8911/2”/50 170.231 25.332”/63 170.233 26.7421/2”/75 170.266 38.823”/90 170.267 43.364”/110 170.267 43.36

Size Code Price

Includes:PVC-U Valve Bracket,Screws and Nuts

Actuator Mounting Dimensions

Size OD mm 20 25 32 40 50 63 75 90 110Size DN mm 15 20 25 32 40 50 65 80 80Size NB inches 1/2 3/4 1 11/4 11/2 2 21/2 3 4

A mm 60,0 60,0 60,0 94,0 94,0 94,0 95,0 95,0 95,0B mm 70,0 70,0 70,0 93,0 93,0 93,0 119,0 119,0 119,0F mm 11,0 11,0 11,0 14,0 14,0 14,0 17,0 17,0 17,0R mm 42,0 42,0 42,0 50,0 50,0 50,0 70,0 70,0 70,0X mm 38,0 38,0 38,0 48,0 48,0 48,0 72,5 72,5 72,5Y mm 11,0 11,0 11,0 13,0 13,0 13,0 18,0 18,0 18,0Type F04 F04 F04 F05 F05 F05 F07 F07 F07

A

Y

F

øD

B

G

X

IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l England l Tel: 0191 521 3111 l www.ipsflowsystems.com

1/2 12.1760NP 54.873/4 12.2073NP 60.69

1 12.2069NP 71.5311/4 12.2077NP 88.7311/2 12.1107NP 105.07

2 12.1108NP 130.0921/2 12.1128NP 239.05

3 12.0362NP 317.444 12.2143NP 405.62

3/8 12.1939 27.521/2 12.1760 28.953/4 12.2073 34.15

1 12.2069 42.4711/4 12.2077 54.5311/2 12.1107 64.79

2 12.1108 78.1621/2 12.1128 159.04

3 12.0362 195.384 12.2143 266.13

89

manual valves

EPDM SealsPTFE Seats

3/8 12.1479 32.851/2 12.1480 34.153/4 12.2148 40.64

1 12.2149 50.3711/4 12.2150 63.6111/2 12.0302 75.17

2 12.0300 89.9721/2 12.1129 182.40

3 12.1490 230.444 12.2792 304.44

16 12.1117 32.8520 12.1119 34.1525 12.1121 40.6432 12.1123 50.3740 12.1125 63.6150 12.1126 75.1763 12.1127 89.9775 12.1129 182.4090 12.1131 230.44

110 12.1747 304.44

3/8 12.1133 35.701/2 12.1135 37.003/4 12.1137 44.27

1 12.1139 54.5311/4 12.1141 68.8111/2 12.1143 81.79

2 12.1145 98.5421/2 12.1147 197.33

3 12.1149 253.80

FPM SealsPTFE Seats

3/8 12.1132 30.261/2 12.1134 31.553/4 12.1136 37.65

1 12.1138 46.6111/4 12.1140 59.4611/2 12.1142 71.02

2 12.1144 86.3521/2 12.1146 173.97

3 12.1148 217.46


FPM SealsPTFE Seats

16 12.1116 27.5220 12.1118 28.9525 12.1120 34.1532 12.1122 42.4740 12.1124 54.5350 12.1048 64.7963 12.1049 78.1675 12.1128 159.0490 12.1130 195.38

110 12.1746 266.13


FPM SealsPTFE Seats

Praher Type S4 Ball Valve

Description: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 3/8”/16mm to 21/2”/75mm - 16 bar;3”/90mm - 10 bar; 4”/100mm - 6 barFluid Temperature Range: 0˚C - 60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots, BSP Female Threaded,HDPE Fusion Spigots, Flanged PN10 or ASA150Option: Silicon-freeFeatures: Lockable handle and tagging point included

Inch Solvent Cement Sockets

BSP Threaded Sockets BSP Threaded Sockets


MM Solvent Cement SocketsMM Solvent Cement Sockets


1/2 12.1480NP 60.073/4 12.2148NP 67.18

1 12.2149NP 79.4411/4 12.2150NP 97.8211/2 12.0302NP 115.46

2 12.0300NP 141.8921/2 12.1129NP 262.42

3 12.1490NP 352.494 12.2792NP 443.92

FPM SealsPTFE Seats

Flanged PN10 * Flanged PN10 *

16 12.6213 34.9920 12.6214 36.6125 12.6215 44.9632 12.6216 56.8440 12.6217 73.6550 12.6218 86.7063 12.6219 97.1975 12.6220 248.3490 12.6221 272.42

110 12.6222 360.73

16 12.5357 29.9720 12.5358 31.5725 12.5359 38.5332 12.5360 49.2440 12.5361 64.7650 12.5362 76.5363 12.5363 85.6375 12.5364 193.2190 12.5365 238.16

110 12.5366 323.25


FPM SealsPTFE Seats

HDPE Fusion SpigotsHDPE Fusion Spigots

* ASA 150 Flanges on request


90

manual valves

Spears Ball Valve Stem Extension Kit

Does not include extension pipe. * Also Spears True Union Ball Valve (old style)

Spears Valve Bracket

1/2"/20mm TUMB2-005 34.283/4"/25mm TUMB2-007 36.35

1"/32mm TUMB2-010 39.0911/4"/40mm TUMB2-012 40.9011/2"/50mm TUMB2-015 44.14

2"/63mm TUMB2-020 49.203"/90mm TUMB2-030 93.34

4"/110mm TUMB2-040 114.11

Includes: Polypropylene Valve Bracket, Screws and Nuts.Suitable for use on Spears True Union 2000 Ball Valve

Valve Size

Spears Ball Valve Round Safety Handle

1/2 18-24-00528 99-24-00528 10.133/4 18-24-00728 99-24-00728 12.20

1 18-24-01028 99-24-01028 12.9311/4 18-24-01228 99-24-01228 15.3111/2 18-24-01528 99-24-01528 15.31

2 18-24-02028 99-24-02028 19.8721/2 & 3 18-24-03028 99-24-03028 42.47

4 18-24-04028 99-24-04028 57.12

Suitable for use on Spears True Union, Single Union or Compact Ball Valve.

Valve Size

Spears Actuator Mounting Platform

1/2"/20mm MMP1-005 14.543/4"/25mm MMP1-007 15.06

1"/32mm MMP1-010 17.5311/4"/40mm MMP1-012 19.2111/2"/50mm MMP1-015 26.22

2"/63mm MMP1-020 29.603"/90mm MMP1-030 66.73

4"/110mm MMP1-040 76.85

Includes: Polypropylene Mounting Platform, Screws and Nuts.Suitable for use with Spears True Union 2000 Ball Valve

Valve Size

True Union 2000Ball Valves

Single Union &Compact Ball Valves*

1/2 BVSE2-005-000 BVSE-005-000 7.853/4 BVSE2-007-000 BVSE-007-000 8.70

1 BVSE2-010-000 BVSE-010-000 8.7011/4 BVSE2-012-000 BVSE-012-000 14.1611/2 BVSE2-015-000 BVSE-015-000 16.09

2 BVSE2-020-000 BVSE-020-000 17.4021/2 & 3 BVSE2-030-000 BVSE-030-000 17.79

4 BVSE2-040-000 BVSE-040-000 24.41

Valve SizeTrue Union 2000

Ball ValvesSingle Union &

Compact Ball Valves*


91

manual valves

Spears True Union 2000 Industrial Ball Valve

Description: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 16 bar; sizes 21/2” to 6” - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C - 60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots,NPT Female Threaded, Reinforced NPT Female Threaded, FlangedFeatures: Sizes 1/2” to 2” Solvent Socket valves also include NPT Female Threadedend connections. All valves are assembled with silicon-free, water soluble lubricantOption: T-Handle operation on 6” valve


1/2 1839- 005 35.453/4 1839- 007 41.94

1 1839- 010 49.9811/4 1839- 012 79.3311/2 1839- 015 83.08

2 1839- 020 108.6721/2 1832- 025 257.04

3 1832- 030 277.824 1832- 040 469.316 1832- 060 1539.676* 18326- 60 1539.67

FPM SealsPTFE Seats

1/2 1829- 005 31.943/4 1829- 007 37.78

1 1829- 010 44.9211/4 1829- 012 62.0611/2 1829- 015 74.78

2 1829- 020 98.6621/2 1822- 025 190.20

3 1822- 030 250.554 1822- 040 422.576 1822- 060 1387.796* 18226- 60 1387.79

Inch Solvent Cement Sockets Inch Solvent Cement Sockets

*T-Handle operation *T-Handle operation


1/2 1837- 005 35.453/4 1837- 007 41.94

1 1837- 010 49.9811/4 1837- 012 79.3311/2 1837- 015 83.08

2 1837- 020 108.6721/2 1837- 025 257.04

3 1837- 030 277.824 1837- 040 469.316 1837- 060 1539.676* 18376- 60 1539.67

FPM SealsPTFE Seats

1/2 1827- 005 31.943/4 1827- 007 37.78

1 1827- 010 44.9211/4 1827- 012 62.0611/2 1827- 015 74.78

2 1827- 020 98.6621/2 1827- 025 190.20

3 1827- 030 250.554 1827- 040 422.576 1827- 060 1387.796* 18276- 60 1387.79

Inch Solvent Cement Spigots Inch Solvent Cement Spigots



1/2 1833- 005 48.693/4 1833- 007 62.83

1 1833- 010 75.1711/4 1833- 012 91.1411/2 1833- 015 112.42

2 1833- 020 174.6121/2 1833- 025 308.97

3 1833- 030 416.724 1833- 040 782.826 1833- 060 2532.796* 18336- 60 2532.79

FPM SealsPTFE Seats

1/2 1823- 005 45.583/4 1823- 007 57.78

1 1823- 010 69.8411/4 1823- 012 82.0511/2 1823- 015 103.35

2 1823- 020 164.8721/2 1823- 025 303.78

3 1823- 030 335.594 1823- 040 675.066 1823- 060 2183.586* 18236- 60 2183.58

Flanged ASA 150 Flanged ASA 150


All Spears valves are assembled with a watersoluble lubricant and are ‘silicon free.’

Silicon Free Valves


92

manual valves

Spears True Union 2000 Industrial Vented Ball Valve

Description: In-line double union ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 16 bar; sizes 21/2” to 4” - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots, Reinforced NPT FemaleThreaded, FlangedFeatures: Designed for Sodium Hypochlorite and other chemical applicationsVented ball equalises internal fluid pressure assuring proper valve operation and long life


1/2 1839V- 005 41.843/4 1839V- 007 49.47

1 1839V- 010 59.0011/4 1839V- 012 93.5411/2 1839V- 015 97.99

2 1839V- 020 128.4821/2 1832V- 025 303.36

3 1832V- 030 327.994 1832V- 040 554.156 1832V- 060 1270.32

FPM SealsPTFE Seats

1/2 1829V- 005 37.583/4 1829V- 007 44.47

1 1829V- 010 52.9711/4 1829V- 012 73.2811/2 1829V- 015 88.27

2 1829V- 020 116.4821/2 1822V- 025 223.89

3 1822V- 030 295.194 1822V- 040 498.756 1822V- 060 1077.39



1/2 1831V- 005 SR 42.643/4 1831V- 007 SR 51.44

1 1831V- 010 SR 60.9611/4 1831V- 012 SR 99.3811/2 1831V- 015 SR 104.27

2 1831V- 020 SR 134.9221/2 1831V- 025 SR 321.65

3 1831V- 030 SR 346.284 1831V- 040 SR 575.52

FPM SealsPTFE Seats

1/2 1821V- 005SR 38.403/4 1821V- 007SR 46.41

1 1821V- 010SR 54.9211/4 1821V- 012SR 79.1211/2 1821V- 015SR 94.55

2 1821V- 020SR 123.2721/2 1821V- 025SR 242.19

3 1821V- 030SR 313.494 1821V- 040SR 520.10

NPT Female ThreadedStainless Steel Reinforced



20 132 673 60.3325 132 674 71.3432 132 675 75.2540 132 676 81.51

FPM SealsPTFE Seats

ASV Stubbe ProfiDos 101 Dosing Ball Valve

20 132 661 56.8725 132 662 65.7832 132 663 74.1940 132 664 79.13

Description: In-line double union ball valve with flow indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent SocketsFeatures: Accurate flow control with visible indicator

MM Solvent Cement Unions MM Solvent Cement Unions


1/2 132 673-1 60.333/4 132 674-1 71.34

1 132 675-1 75.2511/4 132 676-1 81.51

FPM SealsPTFE Seats

1/2 132 661-1 56.873/4 132 662-1 65.78

1 132 663-1 74.1911/4 132 664-1 79.13

Inch Solvent Cement Unions Inch Solvent Cement Unions


93

manual valves

Spears True Union 2000 Standard Ball Valve

Description: In-line double union ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 16 bar; sizes 21/2” to 4” - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C - 60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, Solvent Spigots,NPT Female Threaded, Reinforced NPT Female Threaded, FlangedFeatures: Sizes 1/2” to 2” Solvent Socket valves also include NPT Female Threadedend connections

EPDM SealsPTFE/HDPE Seats

1/2 3639- 005 28.443/4 3639- 007 33.63

1 3639- 010 39.9911/4 3639- 012 63.4911/2 3639- 015 66.46

2 3639- 020 86.9821/2 3632- 025 205.76

3 3632- 030 222.654 3632- 040 375.84

FPM SealsPTFE/HDPE Seats

1/2 3629- 005 25.593/4 3629- 007 30.26

1 3629- 010 35.9711/4 3629- 012 49.7311/2 3629- 015 59.85

2 3629- 020 78.9421/2 3622- 025 151.25

3 3622- 030 200.584 3622- 040 338.18



1/2 3637- 005 28.443/4 3637- 007 33.63

1 3637- 010 39.9911/4 3637- 012 63.4911/2 3637- 015 66.46

2 3637- 020 86.9821/2 3637- 025 205.76

3 3637- 030 222.654 3637- 040 375.84


1/2 3627- 005 25.593/4 3627- 007 30.26

1 3627- 010 35.9711/4 3627- 012 49.7311/2 3627- 015 59.85

2 3627- 020 78.9421/2 3627- 025 151.25

3 3627- 030 200.584 3627- 040 338.18



1/2 3633- 005 38.943/4 3633- 007 50.24

1 3633- 010 60.1111/4 3633- 012 72.9511/2 3633- 015 89.97

2 3633- 020 139.5621/2 3633- 025 247.31

3 3633- 030 333.644 3633- 040 625.74


1/2 3623- 005 36.483/4 3623- 007 46.21

1 3623- 010 55.9511/4 3623- 012 65.6911/2 3623- 015 82.70

2 3623- 020 131.7821/2 3623- 025 243.42

3 3623- 030 251.864 3623- 040 540.04



94

manual valves


1/2 2131-005 17.403/4 2131-007 21.55

1 2131-010 25.8311/4 2131-012 45.8411/2 2131-015 45.84

2 2131-020 61.803 2131-030 200.584 2131-040 395.95

1/2 2132-005 17.403/4 2132-007 21.55

1 2132-010 25.8311/4 2132-012 45.8411/2 2132-015 45.84

2 2132-020 61.803 2132-030 200.584 2132-040 395.956 2132-060 513.44

FPM SealsPTFE Seats

1/2 2122-005 15.453/4 2122-007 21.17

1 2122-010 22.9811/4 2122-012 41.2811/2 2122-015 41.28

2 2122-020 55.043 2122-030 179.154 2122-040 275.226 2122-060 357.00


FPM SealsPTFE Seats

Spears Compact Ball Valve

1/2 2121-005 15.453/4 2121-007 21.17

1 2121-010 22.9811/4 2121-012 41.2811/2 2121-015 41.28

2 2121-020 55.043 2121-030 179.154 2121-040 275.22

Description: In-line ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2”- 16 bar; sizes 3” to 6” - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150

NPT Female Threaded Sockets NPT Female Threaded Sockets

Inch Solvent Cement SocketsInch Solvent Cement Sockets

EPDM Seals 1/2 2622-005G 7.213/4 2622-007G 8.56

1 2622-010G 11.6211/4 2622-012G 15.4511/2 2622-015G 23.50

2 2622-020G 29.73

EPDM Seals

Spears Utility Ball Valve

1/2 2621-005G 7.213/4 2621-007G 8.56

1 2621-010G 11.6211/4 2621-012G 15.4511/2 2621-015G 23.50

2 2621-020G 29.73

Description: In-line ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-U (also available in white PVC-U)Seals: EPDMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded

NPT Threaded Sockets Inch Solvent Sockets

economy ball valves


95

manual valves

EPDM SealsHDPE Seats

3/8” 120.002 18.311/2” 120.017 18.313/4” 122.074 20.65

1” 122.070 22.0811/4” 122.078 29.9911/2” 120.077 37.78

2” 120.107 51.1521/2” 120.124 123.07

3” 120.000 165.53

16 120.001 18.3120 120.016 18.3125 120.031 20.6532 120.046 22.0840 120.061 29.9950 120.076 37.7863 120.106 51.1575 120.124 123.0790 120.266 165.53


16 120.011 13.2420 120.026 13.2425 120.041 14.1632 120.056 20.9140 120.071 22.5850 120.325 30.5163 120.326 38.4375 120.134 116.9790 120.713 155.14



Praher Type S5 Ball Valve

3/8” 120.012 13.241/2” 122.880 13.243/4” 122.881 14.16

1” 122.882 20.9111/4” 122.883 22.5811/2” 122.884 30.51

2” 122.885 38.4321/2” 122.147 116.97

3” 122.886 155.14

Description: In-line double union ball valve for water or weak chemicalsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 21/2”/75mm - 10 bar; 3”/90mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: HDPE or PTFEEnd Connections: Solvent Sockets, Solvent Spigots, BSP Female Threaded, HDPEFusion Spigots


Economy Valve - HDPE Seats Standard Valve - PTFE Seats




3/8” 120.003 20.251/2” 120.018 20.253/4” 120.033 23.77

1” 120.048 25.7011/4” 120.063 34.4111/2” 120.082 42.58

2” 120.108 57.1221/2” 120.126 137.60

3” 120.263 187.60


3/8” 120.013 15.311/2” 120.028 15.313/4” 120.043 17.01

1” 120.058 24.5511/4” 120.073 27.0111/2” 120.091 35.06

2” 120.120 44.0221/2” 120.136 131.78

3” 120.264 176.55

BSP Threaded Sockets BSP Threaded Sockets


1/2 2432- 005G 17.923/4 2432- 007G 22.58

1 2432- 010G 26.4811/4 2432- 012G 36.7511/2 2432- 015G 36.75

2 2432- 020G 53.623 2432- 030G 216.164 2432- 040G 382.97

FPM SealsPTFE Seats

Spears Single Union Ball Valve

1/2 2422- 005G 16.093/4 2422- 007G 20.25

1 2422- 010G 23.8911/4 2422- 012G 33.1111/2 2422- 015G 33.11

2 2422- 020G 48.293 2422- 030G 187.604 2422- 040G 351.81

Description: In-line ball valve with one union connectionMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” - 2” 16 bar; sizes 3” - 4” - 10 barFluid Temperature Range: 0˚C - 60˚CConstruction:Body: PVC-U (Also available in white PVC-U)Seals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded


economy ball valves


96

manual valves

ASV Stubbe Compact 16 Ball Valve

Description: In-line one-piece ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 20 to 110 - 10 bar; sizes 140 to 160 - 6 bar.Fluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-UBall: PESeals: EPDM or FPMSeats: CSM or PTFEEnd Connections: Flanged BS4504 EN1072 PN10 (PP Steel Core Flanges)Features: Low maintenance, compact style. Full bore in all sizes.

EPDM SealsCSM Seats

63/2 64 044 157.6475/21/4 62 299 223.7990/3 61 349 273.24110/4 61 157 343.71140/5 67 964 479.71160/6 57 675 506.92

FPM SealsPTFE Seats

63/2 51 643 134.7675/21/4 51 644 201.5390/3 51 645 254.70110/4 51 646 331.97140/5 51 647 404.30160/6 51 854 494.55

Flanged PN10 Flanged PN10

1/4” 122.353 19.99

1/4” 122.355 19.99

1/4” 122.354 24.80

1/4” 122.356 24.80

1/4” 14.1144 3.83

1/4” 14.0203 3.83

3/8 x 1/4” 122.751 19.99

3/8 x 1/4” 122.757 24.80

BSP male x BSP femaleEPDM seals

NPT male x NPT femaleEPDM seals

BSP male x BSP femaleFPM seals

NPT male x NPT femaleFPM seals

BSP hose nozzle

NPT hose nozzle

BSP male x BSP femaleEPDM seals

BSP male x BSP femaleFPM seals

Praher Laboratory Ball Valve

Description: In-line ball valve with accessoriesMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: BSP or NPT Threaded


97

manual valves

3/8 H0 DKE 101 37.821/2 H0 DKE 102 39.383/4 H0 DKE 103 46.40

1 H0 DKE 104 56.0511/4 H0 DKE 105 71.3111/2 H0 DKE 106 92.16

2 H0 DKE 107 116.9321/2 H0 DKE 108 251.94

3 H0 DKE 109 302.344 H0 DKE 110 415.70



Durapipe VKD Double Union Ball Valve

Description: In-line double union ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-U Seals: EPDM or FPMSeats: PTFEEnd Connections: Solvent SocketsFeatures: Safe blocked unions, multi-functional handle, easy actuator mountingplatform and bracketing points includedOptions: Electric or pneumatic actuation

16 H0 DKE 305 37.8220 H0 DKE 306 39.4325 H0 DKE 307 46.4232 H0 DKE 308 56.0240 H0 DKE 309 71.3050 H0 DKE 310 92.1163 H0 DKE 311 116.9775 H0 DKE 312 251.9490 H0 DKE 313 302.34

110 H0 DKE 314 415.70

MM Solvent Cement Sockets


1/2 H0 DKF 102 47.013/4 H0 DKF 103 55.74

1 H0 DKF 104 69.5811/4 H0 DKF 105 84.3811/2 H0 DKF 106 110.69

2 H0 DKF 107 151.7821/2 H0 DKF 108 302.34

3 H0 DKF 109 371.624 H0 DKF 110 472.39


FPM SealsPTFE Seats

20 H0 DKF 306 47.0125 H0 DKF 307 55.7432 H0 DKF 308 69.5840 H0 DKF 309 84.3850 H0 DKF 310 110.6963 H0 DKF 311 151.7875 H0 DKF 312 302.3490 H0 DKF 313 371.62

110 H0 DKF 314 472.39


FPM SealsPTFE Seats

1/2 H0 DKE B02 42.353/4 H0 DKE B03 50.28

1 H0 DKE B04 61.6611/4 H0 DKE B05 80.3011/2 H0 DKE B06 104.77

2 H0 DKE B07 133.4221/2 H0 DKE B08 259.98

3 H0 DKE B09 330.05

BSP Female Threaded


1/2 H0 DKF B02 49.983/4 H0 DKF B03 59.63

1 H0 DKF B04 75.1911/4 H0 DKF B05 93.3711/2 H0 DKF B06 123.30

2 H0 DKF B07 168.2721/2 H0 DKF B08 310.37

3 H0 DKF B09 399.33

BSP Female Threaded

FPM SealsPTFE Seats

3/8”/16 F03-04 x 11mm sq KTP QCP EF 30.081/2”/20 F03-04 x 11mm sq KTP QCP EF 30.083/4”/25 F03-05 x 11mm sq KTP QCP GG 31.903/4”/25 F04 x 11mm sq KTP QCP G4 31.90

1”/32 F03-05 x 11mm sq KTP QCP HH 31.901”/32 F04 x 11mm sq KTP QCP H4 31.90

11/4”/40 F05-07 x 14mm sq KTP QCP I I 36.4611/2”/50 F05-07 x 14mm sq KTP QCP JJ 36.46

2”/63 F05-07 x 14mm sq KTP QCP LL 38.74

Durapipe VKD Valve Actuator BracketSize Dimensions Code Price


98

manual valves


3/8” 12.0674 79.441/2” 12.0676 79.443/4” 12.0671 82.31

1” 12.0657 82.3111/4” 12.0778 121.2611/2” 12.0773 122.29

2” 12.0775 152.55

16 12.0667 79.4420 12.0669 79.4425 12.1831 82.3132 12.0307 82.3140 12.0767 121.2650 12.0768 122.2963 12.0769 152.55

FPM SealsPTFE Seats

16 12.0625 59.9720 12.0627 59.9725 12.1816 61.0232 12.1774 61.0240 12.2714 93.6150 12.2715 93.6163 12.2716 117.49


FPM SealsPTFE Seats

Praher Type S4 T-Port Ball Valve

3/8” 12.0629 59.971/2” 12.0631 59.973/4” 12.2995 61.02

1” 12.2195 61.0211/4” 12.2997 93.6111/2” 12.2752 93.61

2” 12.2754 117.49

Description: In-line horizontal T-port 3-way ball valve with lockable handle andunion endsMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, BSP Female Thread, HDPE Fusion SpigotsOption: Silicon-free


MM Solvent Cement UnionsMM Solvent Cement Unions


3/8” 12.0634 70.571/2” 12.0636 70.573/4” 12.0638 71.92

1” 12.1815 71.9211/4” 12.0939 107.9511/2” 12.0940 109.56

2” 12.0941 143.42

BSP Threaded Sockets

1/2 H0 TKE 102 68.983/4 H0 TKE 103 79.79

1 H0 TKE 104 98.2811/4 H0 TKE 105 110.4311/2 H0 TKE 106 134.92

2 H0 TKE 107 175.24



Durapipe TK 3-Way Ball Valve T-Port

Description: In-line horzontal T-Port 3-way ball valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-U Seals: EPDM or FPMSeats: PTFEEnd Connections: Solvent SocketsOptions: L-Port; electric or pneumatic actuation

20 H0 TKE 306 68.9825 H0 TKE 307 79.7932 H0 TKE 308 98.2840 H0 TKE 309 110.4350 H0 TKE 310 134.9263 H0 TKE 311 175.24



1/2 H0 TKP 102 89.663/4 H0 TKP 103 105.20

1 H0 TKP 104 127.5211/4 H0 TKP 105 140.8011/2 H0 TKP 106 244.44

2 H0 TKP 107 306.13


FPM SealsPTFE Seats

20 H0 TKP 306 89.6625 H0 TKP 307 105.2032 H0 TKP 308 127.5240 H0 TKP 309 140.8050 H0 TKP 310 244.4463 H0 TKP 311 306.13


FPM SealsPTFE Seats


99

manual valves


3/8” 12.0675 79.441/2” 12.0677 79.443/4” 12.0672 82.31

1” 12.0658 82.3111/4” 12.0779 121.2611/2” 12.0774 122.29

2” 12.0776 152.55

16 12.0668 79.4420 12.0670 79.4425 12.1834 82.3132 12.1835 82.3140 12.0770 121.2650 12.0771 122.2963 12.0772 152.55

FPM SealsPTFE Seats

16 12.0626 59.9720 12.0628 59.9725 12.1832 61.0232 12.1833 61.0240 12.2717 93.6150 12.2718 93.6163 12.2719 117.49


FPM SealsPTFE Seats

Praher Type S4 L-Port Ball Valve

3/8” 12.0630 59.971/2” 12.0633 59.973/4” 12.2996 61.02

1” 12.1897 61.0211/4” 12.2998 93.6111/2” 12.2753 93.61

2” 12.2755 117.49

Description: In-line horizontal L-port 3-way ball valve with lockable handle andunion endsMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, BSP Female Thread, HDPE Fusion SpigotsOption: Silicon-free


MM Solvent Cement UnionsMM Solvent Cement Unions

Praher Valve Bracket for Type S4 T or L-Port Ball Valve

3/8”/16 17.0042 19.871/2”/20 17.0042 19.873/4”/25 17.0022 21.171”/32 17.0022 21.1711/4”/40 17.0001 23.8911/2”/50 17.0001 23.892”/63 17.0018 26.74

Includes:PVC-U Valve Bracket, Screws and Nuts

Size Code Price

Valve shown complete with bracket


3/8” 12.0635 70.571/2” 12.0637 70.573/4” 12.0942 71.92

1” 12.1836 71.9211/4” 12.0937 107.9511/2” 12.2877 109.56

2” 12.0606 143.42

BSP Threaded Sockets


100

manual valves


1/2 5031T1-005SR 80.493/4 5031T1-007SR 93.99

1 5031T1-010SR 115.9411/4 5031T1-012SR 139.5611/2 5031T1-015SR 161.63

2 5031T1-020SR 209.0021/2 5031T1-025SR 636.77

3 5031T1-030SR 646.504 5031T1-040SR 1103.47

1/2 5032T1-005 76.993/4 5032T1-007 91.14

1 5032T1-010 113.0911/4 5032T1-012 134.3611/2 5032T1-015 152.55

2 5032T1-020 199.2721/2 5032T1-025 611.45

3 5032T1-030 621.194 5032T1-040 1074.91

FPM SealsPTFE Seats

1/2 5022T1-005 71.023/4 5022T1-007 84.65

1 5022T1-010 102.6911/4 5022T1-012 118.9111/2 5022T1-015 139.56

2 5022T1-020 170.7321/2 5022T1-025 575.10

3 5022T1-030 586.794 5022T1-040 1063.24


FPM SealsPTFE Seats

Spears 2000 Horizontal T-Port Ball Valve

1/2 5021T1-005SR 73.353/4 5021T1-007SR 87.50

1 5021T1-010SR 105.4111/4 5021T1-012SR 124.3711/2 5021T1-015SR 148.65

2 5021T1-020SR 179.8021/2 5021T1-025SR 600.43

3 5021T1-030SR 613.414 5021T1-040SR 1091.78

Description: In-line horizontal 3-way T-port ball valve with lockable handle and unionendsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2”- 16 bar; sizes 21/2” to 4” - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150

NPT Female Threaded NPT Female Threaded Sockets


1/2 5033T1-005 151.893/4 5033T1-007 160.33

1 5033T1-010 236.2711/4 5033T1-012 432.9511/2 5033T1-015 440.75

2 5033T1-020 574.4621/2 5033T1-025 1125.54

3 5033T1-030 1130.734 5033T1-040 1544.86

FPM SealsPTFE Seats

1/2 5023T1-005 145.403/4 5023T1-007 151.89

1 5023T1-010 216.1611/4 5023T1-012 408.9311/2 5023T1-015 421.28

2 5023T1-020 547.2021/2 5023T1-025 960.67

3 5023T1-030 973.654 5023T1-040 1413.75




101

manual valves


1/2 5031L1-005SR 80.493/4 5031L1-007SR 93.99

1 5031L1-010SR 115.9411/4 5031L1-012SR 139.5611/2 5031L1-015SR 161.63

2 5031L1-020SR 209.0021/2 5031L1-025SR 636.77

3 5031L1-030SR 646.504 5031L1-040SR 1103.47

1/2 5032L1-005 76.993/4 5032L1-007 91.14

1 5032L1-010 113.0911/4 5032L1-012 134.3611/2 5032L1-015 152.55

2 5032L1-020 199.2721/2 5032L1-025 611.45

3 5032L1-030 621.194 5032L1-040 1074.91

FPM SealsPTFE Seats

1/2 5022L1-005 71.023/4 5022L1-007 84.65

1 5022L1-010 102.6911/4 5022L1-012 118.9111/2 5022L1-015 139.56

2 5022L1-020 170.7321/2 5022L1-025 575.10

3 5022L1-030 586.794 5022L1-040 1063.24


FPM SealsPTFE Seats

Spears 2000 Horizontal L-Port Ball Valve

1/2 5021L1-005SR 73.353/4 5021L1-007SR 87.50

1 5021L1-010SR 105.4111/4 5021L1-012SR 124.3711/2 5021L1-015SR 148.65

2 5021L1-020SR 179.8021/2 5021L1-025SR 600.43

3 5021L1-030SR 613.414 5021L1-040SR 1091.78

Description: In-line horizontal 3-way L-port ball valve with lockable handle and unionendsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2”- 16 bar; sizes 21/2” to 4” - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150

NPT Female Threaded NPT Female Threaded Sockets


1/2 5033L1-005 151.893/4 5033L1-007 160.33

1 5033L1-010 236.2711/4 5033L1-012 432.9511/2 5033L1-015 440.75

2 5033L1-020 574.4621/2 5033L1-025 1125.54

3 5033L1-030 1130.734 5033L1-040 1544.86

FPM SealsPTFE Seats

1/2 5023L1-005 145.403/4 5023L1-007 151.89

1 5023L1-010 216.1611/4 5023L1-012 408.9311/2 5023L1-015 421.28

2 5023L1-020 547.2021/2 5023L1-025 960.67

3 5023L1-030 973.654 5023L1-040 1413.75



3-Way Port OptionsVertical Horizontal

SingleL-Port

DoubleL-Port

TripleL-Port

T-Port L-Port T-Port


102

manual valves


1/2 4731T1-005SR 77.633/4 4731T1-007SR 93.09

1 4731T1-010SR 114.8911/4 4731T1-012SR 149.2911/2 4731T1-015SR 163.57

2 4731T1-020SR 210.3121/2 4731T1-025SR 640.01

3 4731T1-030SR 651.704 4731T1-040SR 1111.26

1/2 4732T1-005 76.473/4 4732T1-007 90.36

1 4732T1-010 112.1711/4 4732T1-012 144.0911/2 4732T1-015 154.49

2 4732T1-020 200.5821/2 4732T1-025 614.70

3 4732T1-030 625.744 4732T1-040 1082.71

FPM SealsPTFE Seats

1/2 4722T1-005 70.623/4 4722T1-007 82.83

1 4722T1-010 100.7411/4 4722T1-012 121.7711/2 4722T1-015 140.85

2 4722T1-020 173.3021/2 4722T1-025 607.55

3 4722T1-030 619.904 4722T1-040 1072.31


FPM SealsPTFE Seats

Spears 2000 Vertical T-Port Ball Valve

1/2 4721T1-005SR 71.803/4 4721T1-007SR 85.68

1 4721T1-010SR 103.5911/4 4721T1-012SR 127.4811/2 4721T1-015SR 149.95

2 4721T1-020SR 183.0421/2 4721T1-025SR 632.88

3 4721T1-030SR 645.214 4721T1-040SR 1100.88

Description: In-line vertical 3-way T-port ball valve with lockable handle and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2”- 16 bar; sizes 21/2” to 4” - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150

NPT Threaded Sockets NPT Threaded Sockets


1/2 4733T1-005 151.253/4 4733T1-007 159.68

1 4733T1-010 236.9311/4 4733T1-012 435.5511/2 4733T1-015 440.75

2 4733T1-020 575.1021/2 4733T1-025 1124.24

3 4733T1-030 1132.034 4733T1-040 1489.04

FPM SealsPTFE Seats

1/2 4723T1-005 146.053/4 4723T1-007 153.19

1 4723T1-010 218.7411/4 4723T1-012 412.1811/2 4723T1-015 427.77

2 4723T1-020 551.0921/2 4723T1-025 964.56

3 4723T1-030 977.544 4723T1-040 1421.53




103

manual valves


1/2 4731L1-005SR 77.633/4 4731L1-007SR 93.09

1 4731L1-010SR 114.8911/4 4731L1-012SR 149.2911/2 4731L1-015SR 163.57

2 4731L1-020SR 210.3121/2 4731L1-025SR 640.01

3 4731L1-030SR 651.704 4731L1-040SR 1111.26

1/2 4732L1-005 76.473/4 4732L1-007 90.36

1 4732L1-010 112.1711/4 4732L1-012 144.0911/2 4732L1-015 154.49

2 4732L1-020 200.5821/2 4732L1-025 614.70

3 4732L1-030 625.744 4732L1-040 1082.71

FPM SealsPTFE Seats

1/2 4722L1-005 70.623/4 4722L1-007 82.83

1 4722L1-010 100.7411/4 4722L1-012 121.7711/2 4722L1-015 140.85

2 4722L1-020 173.3121/2 4722L1-025 607.55

3 4722L1-030 619.904 4722L1-040 1072.31


FPM SealsPTFE Seats

Spears 2000 Vertical L-Port Ball Valve

1/2 4721L1-005SR 71.803/4 4721L1-007SR 85.68

1 4721L1-010SR 103.5911/4 4721L1-012SR 127.4811/2 4721L1-015SR 149.95

2 4721L1-020SR 183.0421/2 4721L1-025SR 632.88

3 4721L1-030SR 645.214 4721L1-040SR 1100.88

Description: In-line vertical 3-way L-port ball valve with lockable handle and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2”- 16 bar; sizes 21/2” to 4” - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSeats: PTFEEnd Connections: Solvent Sockets, NPT Female Threaded, Flanged ASA 150

NPT Threaded Sockets NPT Threaded Sockets


1/2 4733L1-005 151.253/4 4733L1-007 159.68

1 4733L1-010 236.9311/4 4733L1-012 435.5511/2 4733L1-015 440.75

2 4733L1-020 575.1021/2 4733L1-025 1124.24

3 4733L1-030 1132.034 4733L1-040 1489.04

FPM SealsPTFE Seats

1/2 4723L1-005 146.053/4 4723L1-007 153.19

1 4723L1-010 218.7411/4 4723L1-012 412.1811/2 4723L1-015 427.77

2 4723L1-020 551.0921/2 4723L1-025 964.56

3 4723L1-030 977.544 4723L1-040 1421.53



The Spears 2000 Vertical L-Port Ball Valve isalso available at additional cost with:- Double L-Port Function- Triple L-Port Function

Please enquire for details and prices.

Additional L-Port Options


104

manual valves

Praher Type S4 Butterfly ValveDescription: Wafer style butterfly valveMounting: In any position, between flanges to BS4504 EN1072 PN10Maximum Fluid Pressure at 20˚C: Sizes 3”/90mm to 5”/140mm - 10 bar; sizes6”/160mm and 8”/225mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body and Disc: PVC-U Seals: EPDM or FPM Shaft: Stainless Steel 304End Connections: Flange mounted (flanges not included) Option: Silicon-free

3/90 12.1919 146.054/110 12.1892 159.685/140 12.2001 188.896/160 12.1871 216.808/225 12.1872 277.17

EPDM Seals

3/90 12.1923 252.504/110 12.1924 275.225/140 12.2192 326.516/160 12.1925 374.538/225 12.1926 479.04

FPM Seals

3/90 12.2322 461.524/110 12.2321 475.805/140 12.2320 525.786/160 12.2319 538.768/225 12.2318 614.04

EPDM Seals

3/90 12.2393 497.864/110 12.2394 514.755/140 12.2395 580.296/160 12.2396 586.158/225 12.2397 676.36

FPM Seals

Lever Operated

2/63 09626 94.6421/2/75 09627 98.41

3/90 09628 112.044/110 09629 123.21125 09630 141.51

5/140 09631 146.056/160 09632 168.128/225 09633 242.4510/250 09634 465.40

Wafer StyleEPDM Seals

Lever Operated

3 09071 149.954 09072 171.366 09074 296.648 09075 419.97

Flanged PN10EPDM Seals

Lever Operated

63 09640 99.1975 09641 106.9790 09642 149.95110 09643 171.36125 09644 204.48140 09645 223.95160 09646 296.64200 09647 419.97225 09648 419.97250 09649 829.56

Flanged PN10EPDM Seals

Lever Operated

Gear Operated

Implex Economy Butterfly Valve

Description: Wafer style butterfly valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 2”/63mm to 5”/140mm - 10 bar;Sizes 6”/160mm to 10”/250mm - 6 barFluid Temperature Range: 0˚C-50˚CConstruction:Body and Disc: PVC-U Seals: EPDM Shaft: Plated Steel End Connections: Flanged

Valve shown flanged style


105

manual valves

Spears Butterfly ValveDescription: Wafer style butterfly valveMounting: In any position, between flanges to ASA 150Maximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body and Disc: PVC-UDisc: Glass Reinforced PVC-USeals: EPDM or FPMShaft: Stainless Steel 316End Connections: Flange mounted (flanges not included)

EPDM Seals 11/2 722311-015 167.792 722311-020 182.40

21/2 722311-025 192.783 722311-030 194.094 722311-040 207.076 722311-060 306.378 722311-080 579.00

FPM Seals 11/2 723311-015 292.102 723311-020 298.59

21/2 723311-025 314.173 723311-030 330.404 723311-040 356.376 723311-060 499.178 723311-080 642.61

EPDM Seals 11/2 722321-015 515.392 722321-020 522.543 722321-030 538.114 722321-040 564.726 722321-060 678.958 722321-080 916.53

10 722321-100 1239.7912 722321-120 1708.43

FPM Seals 11/2 723321-015 720.502 723321-020 726.993 723321-030 767.234 723321-040 785.416 723321-060 1029.488 723321-080 1235.89

10 723321-100 2737.9212 723321-120 4924.09

Also available bare shaft for remote or actuator mounting.Please enquire for details.

Gear OperatedLever Operated

11/2/50 H0 FKE 106 123.642/63 H0 FKE 107 130.41

21/2/75 H0 FKE 108 143.233/90 H0 FKE 109 157.85

4/110 H0 FKE 110 191.185/140 H0 FKE 111 247.546/160 H0 FKE 112 304.388/225 H0 FKE 113 453.03

Lever Operated

EPDM Seals

Durapipe FK Butterfly Valve

Description: Wafer style butterfly valveMounting: In ant position, between flanges to BS4504 PN10; BS10 table D/E, or ASA 150Maximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: Glass reinforced polypropylene Disc: PVC-U Seals: EPDM, FPM or NBREnd Connections: Flange mounted (Flanges not included)Options: Lever or gear operation; electric or pneumatic actuation

21/2/75 HV FKE 108 354.603/90 HV FKE 109 369.23

4/110 HV FKE 110 402.555/140 HV FKE 111 458.896/160 HV FKE 112 515.738/225 HV FKE 113 711.62

10/250 HV FKE 114 1233.6312/315 HV FKE 115 1330.74

Gear Operated

EPDM Seals

11/2/50 H0 FKF 106 149.502/63 H0 FKF 107 158.43

21/2/75 H0 FKF 108 175.933/90 H0 FKF 109 184.49

4/110 H0 FKF 110 220.305/140 H0 FKF 111 277.126/160 H0 FKF 112 340.178/225 H0 FKF 113 496.63

Lever Operated

FPM Seals 21/2/75 HV FKF 108 387.293/90 HV FKF 109 395.86

4/110 HV FKF 110 431.675/140 HV FKF 111 488.476/160 HV FKF 112 551.558/225 HV FKF 113 755.20

10/250 HV FKF 114 2106.5312/315 HV FKF 115 2280.72

Gear Operated

FPM Seals


106

manual valves

EPDM Seals 90 15020 182.24110 15021 199.91125 15022 420.90140 15023 443.45160 15024 490.80

EPDM Seals

Clamp Union Check Valve

3 15120 182.244 15121 199.915 15023 443.456 15124 490.80

Description: Swing Check Valve with Clamp Union ConnectionsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 2”/63mm to 6”/160mm 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body and Disc: Polypropylene - Glass Fibre ReinforcedSeals: EPDMEnd Connections: Clamp Unions in PVC-U or PE

Inch Clamp Union Connections MM Clamp Union Connections

EPDM Seals 40 18004 47.3850 18005 47.3863 18006 57.2175 18007 70.2690 18008 75.10

110 18009 85.41125 18010 98.31140 18011 125.53160 18012 190.90200 18013 281.31

EPDM Seals

Clamp Union Sight Glass

3 18038 75.104 18039 85.415 18011 125.536 18042 190.90

Description: Clear Sight Glass with Clamp Union ConnectionsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 2”/63mm to 6”/160mm 10 barFluid Temperature Range: 0˚C - 60˚CConstruction:Body: Clear PVC-USeals: EPDMEnd Connections: Clamp Unions in PVC-U or PE

Clamp Unions

Inch Clamp Union Connections MM Clamp Union Connections

40 10371 16.9650 10372 20.5463 10373 26.7375 10374 33.0890 10327 42.90

110 10328 50.97125 10329 65.87140 10330 87.21160 10331 105.36200 10332 180.33225 10375 182.01

11/4 10333 23.3011/2 10334 25.10

2 10335 31.0921/2 10336 38.40

3 10337 50.234 10338 55.255 10340 98.406 10341 116.278 10342 191.16

PVC-U Inch Clamp UnionConnections

PVC-U MM Clamp UnionConnections


107

manual valves

Lever OperatedEPDM Seals

63 19N020 120.0975 19N021 120.0990 19N022 162.93

110 19N023 185.64125 19N024 221.98140 19N025 242.76160 19N026 321.95200 19N027 436.46225 19N028 436.46


Clamp Union Butterfly Valve

3 19N012 162.934 19N013 185.645 19N025 242.766 19N016 321.958 19N017 436.46

Description: Butterfly Valve with Clamp Union ConnectionsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 2”/63mm to 5”/140mm 10 bar;size 6”/160mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body and Disc: PVC-USeals: EPDMShaft: Plated SteelEnd Connections: Clamp Unions in PVC-U or PE

Inch Clamp Union Connections

MM Clamp Union Connections

63/75 19N001 108.1890 19N002 117.61

110 19N003 129.31125 19N004 148.65140 19N005 153.19160 19N006 176.55

200/225 19N007 257.31

Valve Only

The Netvitc System® Clamp Union is a quickassembly unit that can be used to assemblePVC-U pipes or for easy connections to butterflyvalves, sight glasses and check valves.The compact design allows for installation incramped conditions, where flanges would betoo large.Lightweight, the clamp union provides a significantweight saving over bolted flanges.

Modular Product Design



108

manual valves

20/1/2 05.0457 18.2625/3/4 05.0457 18.2632/1 05.0458 19.3940/11/4 05.0459 22.1450/11/2 05.0459 22.1463/2 05.0460 23.0175/21/2 12.0933 47.7790/3 12.0933 47.77110/4 12.0934 108.295 12.0934 108.29

EPDM Diaphragm

20/1/2 05.0465 85.6725/3/4 05.0465 85.6732/1 05.0466 89.0440/11/4 05.0467 98.5450/11/2 05.0467 98.5463/2 05.0468 208.8375/21/2 12.0935 240.0190/3 12.0935 240.01110/4 12.0936 401.945 12.0936 401.94

FPM Diaphragm

20/1/2 05.0473 37.0025/3/4 05.0473 37.0032/1 05.0474 41.5140/11/4 05.0475 51.5250/11/2 05.0475 51.5263/2 05.0476 58.2875/21/2 12.0918 283.8690/3 12.0918 283.86110/4 12.0919 325.125 12.0919 325.12

EPDM/PTFE Diaphragm

Praher Replacement Diaphragm

Praher Diaphragm Valve Mounting Plate

✓✓

Ensures clearance of union nut from mounting surfaceComplete with two fixing screws

20 16.0 14 0103 4.6725 23.0 14 0102 4.6732 23.0 14 0102 4.6740 18.5 14 0123 7.5950 23.5 14 0109 7.5963 23.5 14 0109 7.59

Praher diaphragm valveshown with mounting plate

Valve PlateSize Thickness Code Price

1/2 H0 VME 202 53.163/4 H0 VME 203 62.81

1 H0 VME 204 78.1311/4 H0 VME 205 94.7711/2 H0 VME 206 126.27

2 H0 VME 207 155.2521/2 H0 VME 208 291.50

3 H0 VME 209 440.604 H0 VME 210 618.02

Inch Solvent Cement Spigots

EPDMDiaphragm

Durapipe VM Diaphragm Valve

Description: In-line diaphragm valve withposition indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-UDiaphragm: EPDM, FPM or PTFE End Connections: Solvent Spigots

20 H0 VME 406 53.0925 H0 VME 407 62.7432 H0 VME 408 78.1540 H0 VME 409 94.8150 H0 VME 410 138.4063 H0 VME 411 155.2375 H0 VME 412 291.5190 H0 VME 413 440.59

110 H0 VME 414 618.05

MM Solvent Cement Spigots

EPDMDiaphragm

1/2 H0 VMF 202 70.373/4 H0 VMF 203 82.83

1 H0 VMF 204 99.0111/4 H0 VMF 205 121.2811/2 H0 VMF 206 159.09

2 H0 VMF 207 196.7921/2 H0 VMF 208 358.07

3 H0 VMF 209 523.104 H0 VMF 210 734.82


FPMDiaphragm

20 H0 VMF 406 70.3725 H0 VMF 407 82.8332 H0 VMF 408 99.0140 H0 VMF 409 121.2850 H0 VMF 410 159.4263 H0 VMF 411 196.7975 H0 VMF 412 358.0790 H0 VMF 413 523.10

110 H0 VMF 414 734.82


FPMDiaphragm

1/2 H0 VMG 202 114.103/4 H0 VMG 203 124.45

1 H0 VMG 204 144.9111/4 H0 VMG 205 190.5711/2 H0 VMG 206 238.22

2 H0 VMG 207 296.5121/2 H0 VMG 208 499.74

3 H0 VMG 209 684.644 H0 VMG 210 904.52


PTFEDiaphragm

20 H0 VMG 406 114.1025 H0 VMG 407 124.4532 H0 VMG 408 144.9140 H0 VMG 409 190.5750 H0 VMG 410 238.2263 H0 VMG 411 296.5175 H0 VMG 412 499.7490 H0 VMG 413 684.64

110 H0 VMG 414 904.52


PTFEDiaphragm


109

manual valves

EPDM Diaphragm 20 122 212 50.2425 122 213 54.5332 122 214 68.1640 122 215 98.2850 122 216 107.1063 122 217 132.42

EPDM Diaphragm

Praher Type T4 Diaphragm Valve

1/2 122 905 52.843/4 122 906 57.38

1 122 907 71.6711/4 122 908 103.2211/2 122 909 112.56

2 122 910 138.91

PTFE Diaphragm 20 122 832 104.1225 122 833 109.0632 122 834 124.7640 122 835 176.5550 122 836 192.1363 122 837 242.76

PTFE Diaphragm1/2 122 926 109.313/4 122 927 114.50

1 122 928 131.1111/4 122 929 185.6411/2 122 930 201.87

2 122 931 255.11

FPM Diaphragm 20 122 376 104.1225 122 377 109.0632 122 378 124.7640 122 379 176.5550 122 380 192.1363 122 381 242.76

FPM Diaphragm1/2 122 911 109.313/4 122 912 114.50

1 122 913 131.1111/4 122 914 185.6411/2 122 915 201.87

2 122 916 255.11

EPDM Diaphragm 1/2 12 0212 112.173/4 12 0213 116.46

1 12 0216 138.2711/4 12 0217 215.4911/2 12 0218 224.59

2 12 0219 283.0021/2 12 0227 538.76

3 12 0228 603.034 12 0896 803.605 12 0897 1035.97

PTFE Diaphragm1/2 12 0189 57.003/4 12 0190 63.22

1 12 0191 76.8511/4 12 0192 117.1011/2 12 0193 126.45

2 12 0194 156.4421/2 12 0198 341.42

3 12 0200 405.694 12 0898 581.565 12 0899 726.99

Description: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-UDiaphragm: EPDM, FPM or PTFE (EPDM backed)End Connections: Solvent Sockets, Solvent Spigots, Flanged BS4504 EN1072 PN10Option: Silicon-free

Inch Solvent Cement Unions MM Solvent Cement Unions

MM Solvent Cement Unions


Inch Solvent Cement Unions


Flanged PN10 Flanged PN10

FPM Diaphragm 1/2 12 0202 112.173/4 12 0203 116.46

1 12 0205 138.2711/4 12 0206 215.4911/2 12 0208 224.59

2 12 0209 283.0021/2 12 0210 538.76

3 12 0211 603.034 on application on application

5 on application on application

Flanged PN10


110

manual valves

Spears Plug Gate Valve

Description: In-line gate (plug) valve

Mounting: In any position

Maximum Fluid Pressure at 20˚C: 16 bar

Fluid Temperature Range: 0˚C-60˚C

Construction:

Body: PVC-U

Seats & Seals: EPDM, FPM or Buna-N

End Connections: Solvent Sockets, Reinforced NPT Female Threaded, Flanged

Features: Low profile, space saving design

Plug-style wedge provides uniform sealing surface with positive shut-off

Non-rising stem with patented strain-equalising threads

EPDM Seals 1/2 5232- 005 19.213/4 5232- 007 22.46

1 5232- 010 27.76

11/4 5232- 012 38.43

11/2 5232- 015 48.96

2 5232- 020 59.71

FPM Seals1/2 5222- 005 17.403/4 5222- 007 21.30

1 5222- 010 25.33

11/4 5222- 012 34.93

11/2 5222- 015 44.92

2 5222- 020 57.25


EPDM Seals 1/2 5231- 005SR 20.913/4 5231- 007SR 25.06

1 5231- 010SR 31.42

11/4 5231- 012SR 44.14

11/2 5231- 015SR 58.69

2 5231- 020SR 73.47

FPM Seals1/2 5221- 005 SR 19.213/4 5221- 007 SR 23.89

1 5221- 010 SR 28.81

11/4 5221- 012 SR 40.64

11/2 5221- 015 SR 54.78

2 5221- 020 SR 67.76

NPT Female Threaded

Stainless Steel Reinforced

NPT Female Threaded

Stainless Steel Reinforced

EPDM Seals 1/2 5233- 005 99.583/4 5233- 007 111.26

1 5233- 010 122.82

11/4 5233- 012 145.40

11/2 5233- 015 166.82

2 5233- 020 180.46

FPM Seals1/2 5223- 005 86.853/4 5223- 007 97.50

1 5223- 010 106.84

11/4 5223- 012 122.29

11/2 5223- 015 142.16

2 5223- 020 168.77


ASV Stubbe Gauge Guard

Please note: gauge not included.

Description: Pressure gauge connector with isolating diaphragm

Mounting: In any position

Maximum Fluid Pressure at 20˚C: 10 bar

Fluid Temperature Range: 0˚C-60˚C

Construction:

Body: PVC-U

Diaphragm: PTFE (EPDM backed)


1/4x1/4 135539 41.851/2x1/2 135542 41.85

25x1/4x1/4 135533 41.85

32x1/2x1/2 135536 41.85

NPT Female x NPT

Female

Spigot/BSP Female x

BSP Female

111

manual valves

Spears Diaphragm Valve

Description: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 16 bar (PTFE diaphragm - 10bar); sizes 21/2” to 4” - 10 bar; size 6” - 6.5 bar; size 8” - 5 barFlanged valves (where size permits) - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeat: EPDM, FPM, PTFE (EPDM backed) or PTFE (FPM backed)End Connections: Solvent Sockets, Solvent Spigots, NPT Female Threaded, FlangedFeatures: Sizes 1/2” to 2” Solvent Socket valves also include NPT Female Threadedend connections

EPDM DiaphragmEPDM Seals

1/2 2739- 005 73.873/4 2739- 007 83.74

1 2739- 010 102.0411/4 2739- 012 165.5311/2 2739- 015 169.42

2 2739- 020 205.11

FPM DiaphragmFPM Seals

1/2 2729- 005 66.463/4 2729- 007 75.43

1 2729- 010 92.9411/4 2729- 012 139.5611/2 2729- 015 146.70

2 2729- 020 173.31


PTFE DiaphragmEPDM Backed

EPDM Seals

1/2 2739VT- 005 145.403/4 2739VT- 007 157.08

1 2739VT- 010 199.9311/4 2739VT- 012 269.3811/2 2739VT- 015 279.12

2 2739VT- 020 349.88

PTFE DiaphragmFPM Backed

FPM Seals

1/2 2729T- 005 105.823/4 2729T- 007 113.09

1 2729T- 010 163.5711/4 2729T- 012 224.5911/2 2729T- 015 239.52

2 2729T- 020 273.27


EPDM DiaphragmEPDM Seals

1/2 2733- 005 114.773/4 2733- 007 122.16

1 2733- 010 149.9511/4 2733- 012 201.8711/2 2733- 015 205.76

2 2733- 020 234.3321/2 2733- 025 419.97

3 2733- 030 545.254 2733- 040 741.276 2733- 060 1922.648 2733- 080 3461.00

FPM DiaphragmFPM Seals

1/2 2723- 005 106.073/4 2723- 007 119.18

1 2723- 010 134.3611/4 2723- 012 182.4011/2 2723- 015 184.35

2 2723- 020 219.4021/2 2723- 025 367.39

3 2723- 030 490.724 2723- 040 680.266 2723- 060 1730.518 2723- 080 3300.04


PTFE DiaphragmEPDM Backed

EPDM Seals

1/2 2793VT- 005 159.043/4 2793VT- 007 177.22

1 2793VT- 010 223.9511/4 2793VT- 012 297.2911/2 2793VT- 015 309.63

2 2793VT- 020 357.6621/2 2793VT- 025 664.69

3 2793VT- 030 841.234 2793VT- 040 1170.986 2793VT- 060 2997.558 2793VT- 080 4548.91

PTFE DiaphragmFPM Backed

FPM Seals

1/2 2793T- 005 145.403/4 2793T- 007 157.08

1 2793T- 010 199.9311/4 2793T- 012 269.3811/2 2793T- 015 279.12

2 2793T- 020 312.8721/2 2793T- 025 580.29

3 2793T- 030 760.744 2793T- 040 1054.146 2793T- 060 2728.838 2793T- 080 4049.10



112

manual valves

EPDM Seals 21/2 6033- 025 348.663 6033- 030 348.664 6033- 040 446.966 6033- 060 639.21

FPM Seals

Spears Globe Valve

21/2 6023- 025 313.433 6023- 030 313.434 6023- 040 406.776 6023- 060 626.84

Description: In-line globe throttling valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMStem and Plug: PVC-UEnd Connections: Flanged ASA 150Features: Fully serviceable, excellent flow regulating characteristics.Suitable for vacuum use.



113

manual valves

Spears Y-Pattern Valve

Description: In-line Y-Pattern throttling valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 10 bar; sizes 21/2” to 4” - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-U (grey or clear)Seat: EPDM or FPMEnd Connections: Solvent Sockets, Reinforced NPT Female Threaded, FlangedFeatures: Globe valve design provides proportional opening to seating disc travelfor more accurate flow controlSpecial semi-rigid seating disc eliminates vibration for more accurate flow controlY-Pattern reduces flow restriction over standard globe valve

Grey BodyEPDM

1/2 1732- 005 68.163/4 1732- 007 80.63

1 1732- 010 96.7211/4 1732- 012 121.3811/2 1732- 015 156.44

2 1732- 020 223.293 1732- 030 490.724 1732- 040 833.45

Grey BodyFPM

1/2 1722- 005 64.533/4 1722- 007 75.56

1 1722- 010 90.4911/4 1722- 012 110.2211/2 1722- 015 148.00

2 1722- 020 209.673 1722- 030 451.134 1722- 040 765.94


Clear BodyEPDM

1/2 1732- 005CL 85.163/4 1732- 007CL 100.74

1 1732- 010CL 120.8611/4 1732- 012CL 151.8911/2 1732- 015CL 195.38

2 1732- 020CL 279.123 1732- 030CL 613.414 1732- 040CL 1042.46

Clear BodyFPM

1/2 1722- 005CL 80.633/4 1722- 007CL 94.51

1 1722- 010CL 113.0911/4 1722- 012CL 138.2711/2 1722- 015CL 184.35

2 1722- 020CL 262.233 1722- 030CL 564.074 1722- 040CL 956.78


Grey BodyEPDM

1/2 1731- 005 SR 70.623/4 1731- 007 SR 84.26

1 1731- 010 SR 101.6611/4 1731- 012 SR 137.6011/2 1731- 015 SR 167.48

2 1731- 020 SR 236.933 1731- 030 SR 524.484 1731- 040 SR 868.50

Grey BodyFPM

1/2 1721- 005 SR 66.983/4 1721- 007 SR 79.33

1 1721- 010 SR 95.4211/4 1721- 012 SR 130.4711/2 1721- 015 SR 160.33

2 1721- 020 SR 225.893 1721- 030 SR 484.234 1721- 040 SR 800.99



Grey BodyEPDM

1/2 1733- 005 94.123/4 1733- 007 109.06

1 1733- 010 127.6211/4 1733- 012 153.8411/2 1733- 015 189.53

2 1733- 020 266.783 1733- 030 535.524 1733- 040 1043.76

Grey BodyFPM

1/2 1723- 005 90.493/4 1723- 007 104.12

1 1723- 010 122.6911/4 1723- 012 144.0911/2 1723- 015 181.11

2 1723- 020 254.453 1723- 030 495.914 1723- 040 984.03



114

manual valves

Inch or mm Solvent Cement Sockets

Valterra Slide Gate Valve

Description: In-line manually operated slide gate valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 11/2”/50mm - 3.4 bar; 2”/63mm - 2.5 bar;3”/90mm - 2 bar; 4”/110mm -1.4 bar; 6” & 8” - 1 barFluid Temperature Range: 0˚C-40˚CConstruction:Body: ABS or PVC-USeals: SantopremePaddle: Polypropylene or Stainless SteelEnd Connections: Solvent Socket, Solvent Spigot, NPT Threaded

11/2” Socket x Socket Black ABS ABS Polypropylene Plastic I7101 13.1111/2” Socket x Socket White ABS PVC-U Polypropylene Plastic I6101 13.11

50mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8101 13.112” Socket x Socket Black ABS ABS Polypropylene Plastic I7201 19.402” Socket x Socket White ABS PVC-U Polypropylene Plastic I6201 19.042” Socket x Socket Black ABS ABS Stainless Steel Plastic I5201 28.72

63mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8201 19.043” Socket x Socket Black ABS ABS Polypropylene Plastic I7301 25.333” Socket x Socket White ABS PVC-U Polypropylene Plastic I6301 24.853” Socket x Socket Black ABS ABS Stainless Steel Plastic I5301 34.52

90mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8301 25.334” Socket x Socket Grey PVC-U PVC-U Stainless Steel Metal I6401 93.34

110mm Socket x Socket Grey PVC-U PVC-U Polypropylene Plastic I8401 93.346” Socket x Socket White PVC-U PVC-U Stainless Steel Metal I6601 353.60

160mm Socket x Socket White PVC-U PVC-U Stainless Steel Metal I8601 353.608” Socket x Socket White PVC-U PVC-U Stainless Steel Metal I6801 483.43

Size Connections Colour Body Sockets Paddle Handle Code Price

The Valterra Slide Gate Valve is a simple “pull toopen, push to close” valve designed for lowpressure applications. In addition to the valve, arange of optional end connections and fittings isalso available. Please enquire for details.

Low Cost Flow Control

Ball Float Valve

1/2 03500102 24.911 03500104 99.64

11/2 03500106 125.08

Description: Liquid level control valveMounting: In a horizontal positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PolypropyleneArm: PolypropyleneFloat: PolypropyleneEnd Connections: BSP male threaded

economy gate valves


115

manual valves

EPDM Seals 1/2 2032- 005 19.213/4 2032- 007 22.46

1 2032- 010 27.7911/4 2032- 012 38.4311/2 2032- 015 48.96

2 2032- 020 62.833 2032- 030 368.044 2032- 040 729.59

1/2 2035- 005 19.213/4 2035- 007 22.46

1 2035- 010 27.7911/4 2035- 012 38.4311/2 2035- 015 48.96

2 2035- 020 62.83

FPM Seals

1/2 2025- 005 17.403/4 2025- 007 21.30

1 2025- 010 25.3311/4 2025- 012 34.9311/2 2025- 015 44.92

2 2025- 020 57.25

EPDM Seals FPM Seals

Spears Gate Valve

1/2 2022- 005 18.183/4 2022- 007 21.30

1 2022- 010 25.3311/4 2022- 012 34.9311/2 2022- 015 44.92

2 2022- 020 57.353 2022- 030 334.934 2022- 040 663.38

Description: In-line gate valve with non rising stemMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 2” - 14 bar; 3” - 10 bar; 4” - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-UGate: PolypropyleneSeals: EPDM or FPMBonnet: PVC-U except 4” which is Stainless Steel 316End Connections: Solvent Sockets, BSP or NPT Threaded, Flanged.


BSP Threaded SocketsBSP Threaded Sockets

EPDM Seals 20 2034- 005 19.2125 2034- 007 22.4632 2034- 010 27.7940 2034- 012 38.4350 2034- 015 48.9663 2034- 020 62.83

FPM Seals20 2024- 005 17.4025 2024- 007 21.3032 2024- 010 25.3340 2024- 012 34.9350 2024- 015 44.9263 2024- 020 57.25

MM Solvent Cement Sockets MM Solvent Cement Sockets

EPDM Seals 1/2 2033- 005 99.583/4 2033- 007 111.26

1 2033- 010 122.8211/4 2033- 012 145.4011/2 2033- 015 166.82

2 2033- 020 180.4621/2 2033- 025 559.53

3 2033- 030 559.534 2033- 040 915.24

FPM Seals1/2 2023- 005 86.853/4 2023- 007 97.50

1 2023- 010 106.8411/4 2023- 012 122.2911/2 2023- 015 142.16

2 2023- 020 168.7721/2 2023- 025 508.90

3 2023- 030 508.904 2023- 040 832.14


Spears Needle Valve

Description: Globe or Angle pattern flow control valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeal: PTFEEnd Connections: Female NPT ThreadedFeature: Built-in panel or bracket mounting nut

1/4 5591- 002 52.203/8 5591- 003 52.20

Globe Pattern Valve

1/4 5691- 002 52.203/8 5691- 003 52.20

Angle Pattern Valve


116

manual valves

Spears True Union 2000 Industrial Ball Check Valve

Description: In-line ball check valveMounting: VerticalMaximum Fluid Pressure at 20˚C: Sizes 1/2” to 2” - 16 bar; sizes 21/2” to 6” - 10 barAll sizes flanged - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMEnd Connections: Solvent Sockets, Solvent Spigots,NPT Female Threaded, Reinforced NPT Female Threaded, FlangedFeatures: Sizes 1/2” to 2” Solvent Socket valves also include NPT Female Threadedend connectionsAll valves are assembled with Silicon-free, water soluble lubricant

EPDM Seals 1/2 4539- 005 30.643/4 4539- 007 34.15

1 4539- 010 42.8411/4 4539- 012 62.9611/2 4539- 015 71.54

2 4539- 020 97.8821/2 4532- 025 227.19

3 4532- 030 227.194 4532- 040 421.916 4532- 060 1743.49

FPM Seals1/2 4529- 005 27.143/4 4529- 007 32.32

1 4529- 010 38.4311/4 4529- 012 56.2211/2 4529- 015 64.53

2 4529- 020 88.0221/2 4522- 025 213.56

3 4522- 030 213.564 4522- 040 400.506 4522- 060 1573.42


EPDM Seals 1/2 4537- 005 30.643/4 4537- 007 34.15

1 4537- 010 42.8411/4 4537- 012 62.9611/2 4537- 015 71.54

2 4537- 020 97.8821/2 4537- 025 227.19

3 4537- 030 227.194 4537- 040 421.916 4537- 060 1743.49

FPM Seals1/2 4527- 005 27.143/4 4527- 007 32.32

1 4527- 010 38.4311/4 4527- 012 56.2211/2 4527- 015 64.53

2 4527- 020 88.0221/2 4527- 025 213.56

3 4527- 030 213.564 4527- 040 400.506 4527- 060 1573.42


EPDM Seals 1/2 4533- 005 48.043/4 4533- 007 57.51

1 4533- 010 66.9811/4 4533- 012 87.5011/2 4533- 015 101.52

2 4533- 020 135.0221/2 4533- 025 318.06

3 4533- 030 444.644 4533- 040 600.436 4533- 060 2874.23

FPM Seals1/2 4523- 005 38.313/4 4523- 007 46.21

1 4523- 010 54.7811/4 4523- 012 67.7611/2 4523- 015 93.47

2 4523- 020 132.4221/2 4523- 025 273.27

3 4523- 030 382.334 4523- 040 517.336 4523- 060 2476.97


Spears Foot Valve Screen

Description: Foot valve screen for Spears ball check valveFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-UEnd Connections: Solvent Spigot

1/2 FVS- 005 33.113/4 FVS- 007 39.21

1 FVS- 010 47.7711/4 FVS- 012 69.4511/2 FVS- 015 73.22

2 FVS- 020 82.5721/2 FVS- 025 113.59

3 FVS- 030 116.834 FVS- 040 138.27



117

manual valves

EPDM Seals 3/8 12.2651 29.071/2 12.2652 30.263/4 12.2653 36.48

1 12.2654 43.3611/4 12.2655 52.8411/2 12.2656 62.96

2 12.2657 83.0821/2 12.1099 172.66

3 12.2648 219.404 12.4569 290.15

16 12.1087 29.0720 12.1089 30.2625 12.1091 36.4832 12.1093 43.3640 12.1095 52.8450 12.1096 62.9663 12.1097 83.0875 12.1099 172.6690 12.1100 219.40

110 12.2388 290.15

FPM Seals

16 12.1069 24.0220 12.1088 25.3325 12.1090 30.2632 12.1092 35.8340 12.1094 44.1450 12.1041 52.9763 12.1042 71.8075 12.1098 149.9590 12.1043 185.00

110 12.2291 246.01


Praher Type S4 Check (Non-Return) Valve

3/8 12.1940 24.021/2 12.0278 25.333/4 12.2076 30.26

1 12.2072 35.8311/4 12.2080 44.1411/2 12.1109 52.97

2 12.1110 71.8021/2 12.1098 149.95

3 12.1900 185.004 12.2805 246.01

Description: In-line spring cone check valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 21/2”/75mm - 16 bar;3”/90mm - 10 bar; 4”/110mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSpring: Stainless Steel (optional PTFE sleeve)End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE FusionSpigots



EPDM Seals 16 12.1205 29.0720 12.1209 30.2625 12.1211 36.4832 12.1213 43.3640 12.1215 52.8450 12.1217 62.9663 12.1207 83.0875 12.1219 172.6690 12.1221 219.40

3/8 12.1187 31.681/2 12.1189 32.973/4 12.1191 39.99

1 12.1193 47.2611/4 12.1195 57.6411/2 12.1197 69.07

2 12.1199 91.3921/2 12.1201 186.95

3 12.1203 240.82

FPM Seals

3/8 12.1186 26.621/2 12.1188 27.923/4 12.1190 33.50

1 12.1192 39.4611/4 12.1194 48.5511/2 12.1196 58.69

2 12.1198 79.7121/2 12.1200 163.57

3 12.1202 206.42


16 12.1204 24.0220 12.1208 25.3325 12.1210 30.2632 12.1212 35.8340 12.1214 44.1450 12.1216 52.9763 12.1206 71.8075 12.1218 149.2990 12.1220 185.00

MM Solvent Cement Spigots MM Solvent Cement Spigots

BSP Female ThreadedBSP Female Threaded

The S4 check valve is also available with thefollowing end connections:● PVC-U Flanges● PVC-U Solvent Cement Spigots● PE Fusion Spigots

Optional End Connections


118

manual valves

1/2 H0 SRE 102 42.453/4 H0 SRE 103 48.64

1 H0 SRE 104 52.3211/4 H0 SRE 105 63.1411/2 H0 SRE 106 76.95

2 H0 SRE 107 110.43

Inch Solvent Socket x Socket

EPDM Seals

Durapipe SR Single Union Ball Check Valve

Description: In-line ball check valveMounting: VerticalMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-U Seals: EPDM or FPMEnd Connections: Male solvent spigot x female solvent unionOptions: FPM seals

20 H0 SRE 306 42.5225 H0 SRE 307 48.5732 H0 SRE 308 52.3240 H0 SRE 309 63.1450 H0 SRE 310 76.9563 H0 SRE 311 110.43

MM Solvent Spigot x Socket

EPDM Seals

1/2 H0 VAE 102 57.973/4 H0 VAE 103 66.98

1 H0 VAE 104 82.4111/4 H0 VAE 105 89.2011/2 H0 VAE 106 119.78

2 H0 VAE 107 162.10


EPDM Seals

Durapipe VA Air Release Valve

Description: In-line air release valveMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-USeals: EPDM or FPMEnd Connections: Solvent Sockets or BSP Female Threaded

20 H0 VAE 306 57.9725 H0 VAE 307 66.9832 H0 VAE 308 82.4140 H0 VAE 309 89.2050 H0 VAE 310 119.7863 H0 VAE 311 162.10


EPDM Seals

1/2 H0 SRF 102 49.983/4 H0 SRF 103 53.63

1 H0 SRF 104 61.8211/4 H0 SRF 105 75.4611/2 H0 SRF 106 97.79

2 H0 SRF 107 149.42

Inch Solvent Socket x Socket

FPM Seals 20 H0 SRF 306 49.9825 H0 SRF 307 53.6332 H0 SRF 308 61.8240 H0 SRF 309 75.4650 H0 SRF 310 97.7963 H0 SRF 311 149.42

MM Solvent Spigot x Socket

FPM Seals

1/2 H0 VAF 102 59.803/4 H0 VAF 103 63.97

1 H0 VAF 104 73.6211/4 H0 VAF 105 100.6111/2 H0 VAF 106 126.93

2 H0 VAF 107 177.91


FPM Seals 20 H0 VAF 306 59.8025 H0 VAF 307 63.9732 H0 VAF 308 73.6240 H0 VAF 309 100.6150 H0 VAF 310 126.9363 H0 VAF 311 177.91


FPM Seals


119

manual valves

EPDM Seals 3/8 12.0803 25.701/2 12.0804 27.013/4 12.0805 29.85

1 12.0806 34.2811/4 12.0807 44.9211/2 12.0808 59.46

2 12.0809 80.1021/2 12.1277 168.77

3 12.0811 212.914 12.0812 284.31

16 12.1263 25.7020 12.1265 27.0125 12.1267 29.8532 12.1269 34.2840 12.1271 44.9250 12.1273 59.4663 12.1275 80.1075 12.1277 168.7790 12.1279 212.91

110 12.2392 284.31

FPM Seals

16 12.1262 20.6520 12.1264 21.9525 12.1266 23.5032 12.1268 26.7440 12.1270 36.0950 12.1272 49.4663 12.1274 68.8175 12.1276 146.0590 12.1278 179.15

110 12.2391 239.52


Praher Type S4 Air Release Valve

3/8 12.0303 20.651/2 12.2701 21.953/4 12.2130 23.50

1 12.2131 26.7411/4 12.2132 36.0911/2 12.2831 49.46

2 12.2011 68.8121/2 12.1276 146.05

3 12.0099 179.154 12.2999 239.52

Description: In-line air release valveMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes up to 21/2”/75mm - 16 bar;3”/90mm - 10 bar; 4”/110mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMCone: PVC-UEnd Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE FusionSpigots



EPDM Seals 16 12.1460 25.7020 12.1462 27.0125 12.1464 29.8532 12.1466 34.2840 12.1468 44.9250 12.1470 59.4663 12.1472 80.1075 12.1474 168.7790 12.1476 212.91

3/8 12.1281 28.441/2 12.1283 29.603/4 12.1285 32.97

1 12.1287 37.9111/4 12.1289 49.3311/2 12.1291 65.31

2 12.1293 88.2821/2 12.1295 183.71

3 12.1297 234.98

FPM Seals

3/8 12.1280 23.241/2 12.1282 24.413/4 12.1284 26.62

1 12.1286 30.1211/4 12.1288 40.2411/2 12.1290 55.04

2 12.1292 76.5921/2 12.1294 159.68

3 12.1296 199.93


16 12.1459 20.6520 12.1461 21.9525 12.1463 23.5032 12.1465 26.7440 12.1467 36.0950 12.1469 49.4663 12.1471 68.8175 12.1473 146.0590 12.1475 179.15




120

manual valves

Spears Swing Check Valve

Description: In-line flanged swing (flap) check valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 3/4” to 4” - 10 bar; size 6” - 6.9 bar;size 8” - 4.8 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMEnd Connections: Flanged ASA 150Features: Quick response, low closing pressure. Serviceable in-line.Options: Arrow position indicator. Counter balanced flap.

EPDM Seals 3/4 4433- 007 358.961 4433- 010 412.83

11/2 4433- 015 517.332 4433- 020 685.45

21/2 4433- 025 1015.203 4433- 030 1015.204 4433- 040 1439.726 4433- 060 2735.328 4433- 080 5217.48

FPM Seals3/4 4423- 007 323.251 4423- 010 372.59

11/2 4423- 015 500.462 4423- 020 616.65

21/2 4423- 025 860.713 4423- 030 860.714 4423- 040 1226.806 4423- 060 2330.278 4423- 080 4464.53


EPDM Seals 3/8 12.2643 31.941/2 12.2154 33.373/4 12.2179 40.24

1 12.2180 47.7711/4 12.2181 58.1611/2 12.2182 69.33

2 12.2183 91.5321/2 12.2249 190.20

3 12.2250 241.474 12.2251 319.36

16 12.2116 31.9420 12.2117 33.3725 12.2118 40.2432 12.2119 47.7740 12.2120 58.1650 12.2121 69.3363 12.2122 91.5375 12.2123 190.2090 12.2124 241.47

110 12.2720 319.36

FPM Seals

16 12.1764 26.4820 12.1765 27.7925 12.1766 33.3732 12.1767 39.4640 12.1768 48.5550 12.1769 58.1663 12.1770 78.9475 12.1771 164.8790 12.1772 203.82

110 12.2721 270.02


Praher Type S4 Check (Non-Return) Valve -PTFE Sleeved Spring

3/8 12.1991 26.481/2 12.2196 27.793/4 12.2197 33.37

1 12.2198 39.4611/4 12.2199 48.5511/2 12.2200 58.16

2 12.1114 78.9421/2 12.1759 164.87

3 12.1782 203.824 12.2981 270.02

Description: In-line spring weighted cone check valve with PTFE sleeved springMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 21/2”/75mm - 16 bar;3”/90mm - 10 bar; 4”/110mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-U Seals: EPDM or FPM Spring: Stainless Steel (PTFE Sleeved)End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded



Other end connections on request.


121

manual valves

EPDM Seals 3/8 12.2874 27.791/2 12.1032 29.073/4 12.1033 34.01

1 12.1034 39.0911/4 12.1035 49.2011/2 12.1036 61.20

2 12.1037 81.6621/2 12.1368 170.73

3 12.1039 216.164 12.1040 266.26

16 12.1324 27.7920 12.1330 29.0725 12.1336 34.0132 12.1342 39.0940 12.1348 49.2050 12.1355 61.0263 12.1362 81.6675 12.1368 170.7390 12.1374 216.16

110 12.2390 287.56

FPM Seals

16 12.1323 22.8520 12.1329 24.0225 12.1335 27.7932 12.1341 31.5540 12.1347 40.3850 12.1354 51.0263 12.1361 70.3675 12.1367 148.0090 12.1373 182.40

110 12.2389 242.76


Praher Type S4 Foot Valve

3/8 12.2873 22.851/2 12.2109 24.023/4 12.2110 27.79

1 12.2668 31.5511/4 12.2129 40.3811/2 12.1353 51.02

2 12.1360 70.3621/2 12.1367 148.00

3 12.2105 182.404 12.2669 242.76

Description: In-line foot valve with screenMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes up to 21/2”/75mm - 16 bar;3”/90mm - 10 bar; 4”/110mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMCone: PVC-U (weighted)End Connections: Solvent Sockets, Solvent Spigots, BSP Threaded, HDPE Spigots



EPDM Seals 16 12.1848 27.7920 12.1850 29.0725 12.1852 34.0132 12.1854 39.0940 12.1857 49.2050 12.1859 61.0263 12.1861 81.6675 12.1863 170.7390 12.1865 216.16

3/8 12.1322 30.511/2 12.1328 31.293/4 12.1334 37.39

1 12.1340 42.8411/4 12.1346 53.7511/2 12.1352 66.98

2 12.1359 89.8321/2 12.1366 185.64

3 12.1372 238.23

FPM Seals

3/8 12.1321 25.331/2 12.1327 26.623/4 12.1333 30.90

1 12.1339 35.0611/4 12.1345 44.6611/2 12.1351 56.60

2 12.1358 78.1621/2 12.1365 162.28

3 12.1371 203.18


16 12.1847 22.8520 12.1849 24.0225 12.1851 27.7932 12.1853 31.5540 12.1855 40.3850 12.1858 51.0263 12.1860 70.3675 12.1862 148.0090 12.1864 182.40




122

manual valves

Praher Type S4 Wafer Check Valve

Description: Wafer style flap check valveMounting: In any position, between flanges to BS4504 EN1072 PN10. Optionalspring return for mounting in horizontal position or for pulsating flowMaximum Fluid Pressure at 20˚C: Sizes 40mm to 160mm - 10 bar;Sizes 225mm to 315mm - 6 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-USeals: EPDM or FPMSpring: Stainless SteelEnd Connections: Flange mounted (flanges not included)

EPDM Seals 11/4"/40 07.0002 95.8111/2"/50 07.0197 99.19

2"/63 07.0038 116.3321/2"/75 07.0048 119.83

3"/90 07.0058 138.274"/110 07.0068 173.315"/140 07.0078 205.116"/160 07.0088 260.298"/225 07.0098 476.44

10"/280 07.0108 664.6912"/315 07.0118 851.61

FPM Seals11/4"/40 07.0001 65.0511/2"/50 07.0196 71.40

2"/63 07.0036 83.6021/2"/75 07.0046 89.32

3"/90 07.0056 94.124"/110 07.0066 111.005"/140 07.0076 133.076"/160 07.0086 188.898"/225 07.0096 390.75

10"/280 07.0106 562.1212"/315 07.0116 752.95

No Spring Return No Spring Return

Dimensions (mm)

EPDM Seals 11/4"/40 07.0004 164.2411/2"/50 07.0199 168.12

2"/63 07.0039 177.2221/2"/75 07.0049 190.84

3"/90 07.0059 216.164"/110 07.0069 256.405"/140 07.0079 299.246"/160 07.0089 362.208"/225 07.0099 533.55

10"/280 07.0109 791.9012"/315 07.0119 1041.16

FPM Seals11/4"/40 07.0003 99.9611/2"/50 07.0198 108.40

2"/63 07.0037 118.9121/2"/75 07.0047 159.04

3"/90 07.0057 170.064"/110 07.0067 197.335"/140 07.0077 224.596"/160 07.0087 269.388"/225 07.0097 501.77

10"/280 07.0107 715.3112"/315 07.0117 943.80

Stainless Steel Spring Return Stainless Steel Spring Return

63 50 109 18 3275 65 129 20 4090 80 144 20 52

110 100 164 23 70140 125 195 23 92160 150 220 26 112225 200 275 35 150280 250 330 40 190315 300 380 45 216

D DN A B C

Installation Adaptor for Wafer Check Valve

2”/63 07.2202 77.3821/2”/75 07.2203 90.613”/90 07.2204 98.144”/110 07.2205 140.215”/140 07.2206 170.066”/160 07.2207 185.008”/225 07.2208 427.1210”/280 07.2209 702.3212”/315 07.2210 1265.75

Flange MountingAllows the valve to open fullyWill accommodate use with heavywall pipes

Size Code Price


123

manual valves

EPDM Seals

Hidroten Wafer Check Valve

90 13002 122.55110 13003 136.97125 13004 160.98140 13005 190.20160 13006 241.47200 13007 321.95

Description: Wafer style flap check valveMounting: In any position, between flanges to BS 4504 EN1072 PN10Spring return version for mounting in horizontal position or for pulsating flowMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: Polypropylene - Glass Fibre ReinforcedDiaphragm: EPDMEnd Connections: Flange mounted (flanges not included)

No Spring Return

EPDM Seals 90 13012 147.34110 13013 164.24125 13014 192.13140 13015 227.84160 13016 281.71200 13017 368.04

Spring Return

EPDM Seals 90 13022 174.61110 13023 189.53125 13024 218.74140 13025 268.09160 13026 321.95200 13027 409.59

Spring Return and PositionIndicator

Occasionally the flange mounted wafer check valvewill have restricted opening if it is mounted in aheavy wall pipe. For all installations in heavy wallpipes we recommend the use of the additionalinstallation adaptor to ensure that the valve willopen fully.

Praher Flange MountedWafer Check Valves


124

manual valves

Spears Utility Swing Check Valve

Description: In-line swing (flap) check valveMounting: Horizontal or vertical (up-flow)Maximum Fluid Pressure at 20˚C: All sizes - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: White or Clear (transparent) PVC-USeat: EPDMEnd Connections: Solvent Sockets, Solvent Cement Unions,NPT Female Threaded, Reinforced NPT Female ThreadedFeatures: Angled seat and weighted flap for low pressure sealing

White PVC-UEPDM Seat

1/2 S1520C- 05 19.473/4 S1520C- 07 19.87

1 S1520C- 10 20.2511/4 S1520C- 12 21.1711/2 S1520C- 15 23.11

2 S1520C- 20 33.1121/2 S1520C- 25 55.18

3 S1520C- 30 61.414 S1520C- 40 82.57

Clear PVC-UEPDM Seat

1/2 S1520- 05 14.813/4 S1520- 07 14.81

1 S1520- 10 15.4511/4 S1520- 12 15.9711/2 S1520- 15 16.87

2 S1520- 20 26.2221/2 S1520- 25 43.62

3 S1520- 30 48.554 S1520- 40 68.68



1/2 S1720C- 05 16.873/4 S1720C- 07 17.28

1 S1720C- 10 20.6511/4 S1720C- 12 21.6911/2 S1720C- 15 26.48

2 S1720C- 20 37.1321/2 S1720C- 25 60.89

3 S1720C- 30 70.104 S1720C- 40 93.47


1/2 S1720- 05 14.283/4 S1720- 07 14.68

1 S1720- 10 17.5311/4 S1720- 12 18.4411/2 S1720- 15 20.25

2 S1720- 20 30.3821/2 S1720- 25 50.51

3 S1720- 30 64.534 S1720- 40 87.12



1/2 S1520C- 05F 19.473/4 S1520C- 07F 19.87

1 S1520C- 10F 20.2511/4 S1520C- 12F 21.1711/2 S1520C- 15F 23.11

2 S1520C- 20F 33.1121/2 S1520C- 25F 55.18

3 S1520C- 30F 61.414 S1520C- 40F 82.57


1/2 S1520- 05F 14.813/4 S1520- 07F 14.81

1 S1520- 10F 15.4511/4 S1520- 12F 15.9711/2 S1520- 15F 16.87

2 S1520- 20F 26.2221/2 S1520- 25F 43.62

3 S1520- 30F 48.554 S1520- 40F 68.68

NPT Female Threaded NPT Female Threaded


1/2 S1520C- 05F SR 21.813/4 S1520C- 07F SR 23.24

1 S1520C- 10F SR 24.9311/4 S1520C- 12F SR 28.8111/2 S1520C- 15F SR 35.97

2 S1520C- 20F SR 47.1321/2 S1520C- 25F SR 76.99

3 S1520C- 30F SR 98.804 S1520C- 40F SR 121.38


1/2 S1520- 05F SR 17.143/4 S1520- 07F SR 17.14

1 S1520- 10F SR 18.8411/4 S1520- 12F SR 23.5011/2 S1520- 15F SR 29.85

2 S1520- 20F SR 40.2421/2 S1520- 25F SR 48.29

3 S1520- 30F SR 85.944 S1520- 40F SR 107.49



New - Union ends


125

manual valves

Spears Utility Spring Check Valve

Description: In-line spring assisted (flap) check valveMounting: Horizontal or vertical (up-flow)Maximum Fluid Pressure at 20˚C: All sizes - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: White or Clear (transparent) PVC-USeat: EPDMEnd Connections: Solvent Sockets, Solvent Cement Unions,NPT Female Threaded, Reinforced NPT Female ThreadedFeatures: Body design allows maximum flow.Quick response and positive shut-off.


1/2 S1580C- 05 29.053/4 S1580C- 07 32.89

1 S1580C- 10 34.2611/4 S1580C- 12 35.7311/2 S1580C- 15 37.83

2 S1580C- 20 39.1921/2 S1580C- 25 70.60

3 S1580C- 30 73.574 S1580C- 40 104.48


1/2 S1580- 05 28.193/4 S1580- 07 31.89

1 S1580- 10 33.2511/4 S1580- 12 34.6111/2 S1580- 15 36.84

2 S1580- 20 38.5821/2 S1580- 25 68.49

3 S1580- 30 71.464 S1580- 40 101.38



1/2 S1780C- 05 38.703/4 S1780C- 07 43.89

1 S1780C- 10 45.6211/4 S1780C- 12 47.6011/2 S1780C- 15 50.44

2 S1780C- 20 51.9321/2 S1780C- 25 94.09

3 S1780C- 30 98.174 S1780C- 40 139.71


1/2 S1780- 05 37.453/4 S1780- 07 42.53

1 S1780- 10 44.2611/4 S1780- 12 46.1211/2 S1780- 15 49.20

2 S1780- 20 51.1821/2 S1780- 25 91.37

3 S1780- 30 95.204 S1780- 40 135.39



1/2 S1580C- 05F 29.053/4 S1580C- 07F 32.89

1 S1580C- 10F 34.2611/4 S1580C- 12F 35.7311/2 S1580C- 15F 37.83

2 S1580C- 20F 39.1921/2 S1580C- 25F 70.60

3 S1580C- 30F 73.574 S1580C- 40F 104.48


1/2 S1580- 05F 28.193/4 S1580- 07F 31.89

1 S1580- 10F 33.2511/4 S1580- 12F 34.6111/2 S1580- 15F 36.84

2 S1580- 20F 38.5821/2 S1580- 25F 68.49

3 S1580- 30F 71.464 S1580- 40F 101.38

NPT Female Threaded NPT Female Threaded


1/2 S1580C- 05F SR 31.533/4 S1580C- 07F SR 36.35

1 S1580C- 10F SR 38.9411/4 S1580C- 12F SR 43.2811/2 S1580C- 15F SR 50.81

2 S1580C- 20F SR 53.2921/2 S1580C- 25F SR 92.36

3 S1580C- 30F SR 111.154 S1580C- 40F SR 143.42


1/2 S1580- 05F SR 30.543/4 S1580- 07F SR 35.36

1 S1580- 10F SR 37.9611/4 S1580- 12F SR 42.1611/2 S1580- 15F SR 49.82

2 S1580- 20F SR 52.6721/2 S1580- 25F SR 90.26

3 S1580- 30F SR 109.064 S1580- 40F SR 140.32




126

manual valves

EPDM Seals1.8mm Screen

16 12.1701 24.0220 12.1702 25.3325 12.1703 30.2632 12.1704 35.8340 12.1705 44.1450 12.1706 52.9763 12.1707 71.8075 12.1708 149.9590 12.1709 185.00

110 12.1710 246.01

EPDM Seals1.8mm Screen

Praher Type S4 Line Strainer

3/8 12.0557 24.021/2 12.0558 25.333/4 12.0559 30.26

1 12.0560 35.8311/4 12.0561 44.1411/2 12.0562 52.97

2 12.0563 71.8021/2 12.1708 149.95

3 12.0565 185.004 12.0350 246.01

Description: In-line strainer with transparent body and union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 3/8”/16mm to 21/2”/75mm - 16 bar;3”/90mm - 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-U TransparentSeals: EPDM Strainer: Polypropylene with 1.8mm mesh or Stainless Steel with 0.5mm, 0.75mm or 1mm meshEnd Connections: Solvent Socket, BSP Female Thread, HDPE Fusion Spigots


EPDM Sealsno screen included

0.5mm mesh

16 12.4707 22.4620 12.4708 23.7725 12.4709 29.0732 12.4710 34.7940 12.4711 42.8450 12.4712 51.9363 12.4713 71.4075 12.4714 152.5590 12.4715 186.55

110 12.4716 238.23

EPDM Sealsno screen included

3/8 12.4735 22.461/2 12.4736 23.773/4 12.4737 29.07

1 12.4738 34.7911/4 12.4739 42.8411/2 12.4740 51.93

2 12.4741 71.4021/2 12.4742 152.55

3 12.4743 186.954 12.0102 238.23


16/3/8 50606 10.4520/1/2 50606 10.4525/3/4 50608 13.1232/1 50608 13.1240/11/4 50609 14.8150/11/2 50610 18.0663/2 50611 20.9175/21/2 50612 31.6890/3 50613 38.57110/4 50613 38.57

Stainless Steel Screen* Stainless Steel Screen*

Stainless Steel Screen*

0.75mm mesh 16/3/8 50614 10.4520/1/2 50614 10.4525/3/4 50616 13.1232/1 50616 13.1240/11/4 50617 14.8150/11/2 50618 18.0663/2 50619 20.9175/21/2 50620 31.6890/3 50621 38.57110/4 50621 38.57

1mm mesh 16/3/8 50622 10.4520/1/2 50622 10.4525/3/4 50624 13.1232/1 50624 13.1240/11/4 50625 14.8150/11/2 50626 18.0663/2 50627 20.9175/21/2 50628 31.6890/3 50629 38.57110/4 50629 38.57

* Note: A filter support is required for the stainless steel screen

Filter Support for Stainless Steel Screen

16/3/8 14.1474 21.7920/1/2 14.1474 21.7925/3/4 14.1475 22.8432/1 14.1476 22.8440/11/4 14.1477 27.9450/11/2 14.1478 30.8063/2 14.1479 33.3675/21/2 14.1480 42.9790/3 14.1481 56.49110/4 14.1481 56.49


For stainless steel mesh, replace the letter ‘P’ with‘S’.To specify the mesh size, add the following to thepart number:Mesh size Hole size Part Number8 2.39mm 812 1.57mm 1220 0.84mm 2030 0.61mm 30e.g. YS22P8 - 005

Optional Mesh Codes

127

manual valves

PVC-U ScreenEPDM Seals

1/2” YS32P_-005 36.223/4” YS32P_-007 40.50

1” YS32P_-010 51.9311/4” YS32P_-012 63.4911/2” YS32P_-015 91.53

2” YS32P_-020 114.373” YS32P_-030 321.954” YS32P_-040 563.43

PVC-U ScreenFPM Seals

Spears Y-Strainer

1/2” YS22P_-005 30.513/4” YS22P_-007 36.22

1” YS22P_-010 45.8411/4” YS22P_-012 57.2511/2” YS22P_-015 76.33

2” YS22P_-020 95.423” YS22P_-030 299.244” YS22P_-040 523.17

Description: In-line strainer with transparent or grey bodyMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PVC-U transparent or greySeals: EPDM or FPMStrainer: PVC 20 mesh End Connections: Solvent SocketOptions: PVC or stainless steel strainer - 8, 12, 20 or 30 mesh

PVC-U Grey Body PVC-U Grey Body

PVC-U ScreenEPDM Seals

1/2” YS32P_-005CL 39.853/4” YS32P_-007CL 44.56

1” YS32P_-010CL 57.1211/4” YS32P_-012CL 69.8411/2” YS32P_-015CL 100.68

2” YS32P_-020CL 125.813” YS32P_-030CL 338.054” YS32P_-040CL 591.60

PVC-U ScreenFPM Seals

1/2” YS22P_-005CL 33.573/4” YS22P_-007CL 39.85

1” YS22P_-010CL 50.4111/4” YS22P_-012CL 62.9911/2” YS22P_-015CL 83.96

2” YS22P_-020CL 104.973” YS22P_-030CL 314.204” YS22P_-040CL 549.33

PVC-U Transparent Body PVC-U Transparent Body

Prices are for PVC 20 mesh only.Please enquire for alternativemesh strainers.

1/2 H0 UVE 102 34.113/4 H0 UVE 103 37.14

1 H0 UVE 104 50.2611/4 H0 UVE 105 60.7911/2 H0 UVE 106 83.79

2 H0 UVE 107 117.89


EPDM Seals

Durapipe RV Y-Type Strainer

Description: In-line sediment strainerMounting: In any positionMaximum Fluid Pressure at 20˚C: 16 barFluid Temperature Range: 0ºC - 60ºCConstruction:Body: PVC-USeals: EPDM or FPMStrainer: Stainless Steel

20 H0 UVE 306 34.1125 H0 UVE 307 37.8132 H0 UVE 308 49.1840 H0 UVE 309 60.8550 H0 UVE 310 81.7363 H0 UVE 311 117.89


EPDM Seals

Also available in transparent PVC-U

1/2 H0 UVF 102 46.203/4 H0 UVF 103 51.47

1 H0 UVF 104 67.0011/4 H0 UVF 105 75.7511/2 H0 UVF 106 121.18

2 H0 UVF 107 158.79


FPM Seals 20 H0 UVF 306 46.2025 H0 UVF 307 51.4732 H0 UVF 308 67.0040 H0 UVF 309 75.7550 H0 UVF 310 121.1863 H0 UVF 311 158.79


FPM Seals


pvc-u - esi.infocms.esi.info/media/documents/ipsf_pvcumanual_ml.pdf · 90 manual valves spears ball...

Documents