pvc physical properties - cantisa.es · 12.3. - ecotoxicidad: el producto es biológicamente inerte...

9

Upload: others

Post on 19-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16
Page 2: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

2 9

PVC PHYSICAL PROPERTIES1

PVC PROCESSING FEATURES2

PROCESSING FEATURES

Bonding

Clipper cutting

Pre - milling

Radius milling

Fitting

Polished

Lacquer

REMARK

With any common glue for edgebanding

Good

Good

Good

Good

Good

Good with common products. Needed testbefore

PHYSICAL PROPERTIES

DENSTY

VICAT SOFTENING TEMPERATURE(50ºC/h, B 50N)

SHORE HARDNESS D

SHRINKAGE

SCRATCH HARDNESS TEST PENCILWITH VARNISH

CHEMICAL RESISTANCE WITHVARNISH

LIGHT FASTNESS WITH AND WITHOUTVARNISH

VARNISH ADHERENCE

EDGEBANDING ADHERENCE

STATIC CHARGE

STANDARD FOR TESTING

ISO R 1183

ISO 306

DIN 53505/ISO 868

EN 438-2

(Wolff-Wilborn method)ISO 15184

DIN 68861

UNE 56875:14V2

CROSS-CUT TESTISO 2409:2013

UNE 56875

VALUE

1,29 - 1,35 g/cm3

81,3ºC

76,5 +- 3

4 %

HB

1B (Good)

4 gray scale

0 = Excellent

meet the standard

low

Page 3: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

3 9

PVC THICKNESS TOLERANCES3

THICKNESS mm

0 to 1,0

1,1 to 2,0

2,1 to 3,0

TOLERANCE mm

+ 0,15 / - 0,10

+ 0,10 / - 0,20

+ 0,15 / - 0,25

PVC WIDTH TOLERANCES4

WIDTH

16 - 23 mm

24 - 45 mm

TOLERANCE

+/- 0,35 mm

+/- 0,35 mm

5

Cantisa PVC edgebands are manufactured by the extrusion process and are fully dyed.Uniform colour of the material permits the radius would have the correct colour. The impact-resistant formulation guarantees the properly processing on the furniture production, andmany years' usage as furniture.Also provides long service lives for cutting tools in the edgebander.Cantisa PVC edgebands are coated on the back with a primer which permits perfect bondingof the edge with all common hot-melt adhesives.

PVC (polyvinyl chloride) is one of the most widely known and used synthetics. Edgebandingfor the furniture industry have also been used of this material for more than 50 years, withgood results.It has been the very good application processing properties of PVC in particular which havecontributed to its market penetration in furniture production.The variety of applications for Cantisa PVC edgebands is very large for furniture: for theoffice, bathroom and kitchen, etc.

TECHNICAL FEATURES OF CANTISAPVC EDGEBANDING

Page 4: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

4 9

CLEANING7

Cantisa PVC edgebands can be used on any edgebander machines with EVA and PURglues. The guideline values specified by the manufacturers for the respective applicationsmust be observed.Adhesives highly resistant to heat, and the low-shrinkage formulation of the Cantisa PVC,guarantee solid bonding. Measuring the temperature at the applicator roller is recommended.You must follow the specifications from glue manufacturers.Boards and edgebands, to be able to be processed, should be at temperatureabove 18ºC.THE relative humidity in production doesn’t be above 70%.The optimum wood moisture of the board material for processing is between 7 and 10%ication areas of Cantisa PVC edgeban.Rates from 10 to 100 m/min are possible depending on the edgebander.We recommend to use 3 to 6-blade milling cutters with speeds of 12,000 to 18,000 rpm.Cantisa PVC edgebands can be worked very well with the polishing wheel and the colourof the radius must be like the edge surface.

6 PVC PROCESSING RECOMMENDATIONS

The use of special synthetic cleaners is recommended for Cantisa PVC edgebands. Substanceswith a high solvent content, and alcoholic substances, should not be used.Resist the attack of mostacids, alkalis and inorganic salts. It is not attacked by oils, alcohols,aliphatic hydrocarbons and fatty acids. It is attacked (totally or partially) by chlorinatedsolvents, ketones, aromatic hydrocarbons and some aldehydes.

STORAGE CONDITIONS9

WASTE REMOVAL8

Stored under proper conditions, on a dry and cool place (< 30ºC) and protected from directsunlight and dust, Cantisa PVC edgebandings are applicable for a minimum period of oneyear.

Residual PVC from subsequent processing should be separated from the rest of the waste.A return system is in place for the relevant residual materials.

Page 5: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

5.

4.

3.

2.

1.

5 9

PVC EDGEBANDING, SAFETY DATASHEET10

IDENTIFICACIÓN DEL PRODUCTO Y DE LA EMPRESA

1.1 - NOMBRE DEL PRODUCTO: Perfil PVC.1.2 - USO DEL PRODUCTO: Cantos, calandras y soporte de copete.1.3 - NOMBRE DE LA EMPRESA: CANTISA S.A.C/. Pintor Joaquín Sorolla nº 8Polígono Industrial Ciudad Mudeco46930 Quart de Poblet (Valencia) España1.4 - TELÉFONO DE URGENCIAS: Servicio de Información Toxicológica: 91 562 04 20

COMPOSICIÓN/INFORMACIÓN SOBRE LOS COMPONENTES

PVC. extrusionado o calandrado cubierto de adhesivo, tinta y barniz.

IDENTIFICACIÓN DE PELIGROS

No presenta peligro para el hombre y el medio ambiente. En caso de incendio puede liberarvapores perjudiciales para la salud.

PRIMEROS AUXILIOS

En condiciones normales no son necesarias medidas especiales.

MEDIDAS DE LUCHA CONTRA INCENDIOS

5.1 - PRODUCTO EXTINTOR ADECUADO. SOCIEDAD ANÓNIMARECUBRIMIENTOS PARA CANTOSY MOLDURASCantisa s.a. Dpto. Técnico (control de calidad) 6 Agua, espuma, polvo químico, CO2.5.2 - GASES COMBUSTIBLES PELIGROSOS.Formación de HCl durante la combustión.5.3 - RIESGOS ESPECÍFICOS:En un incendio, el producto es considerado auto extintor y no propaga la llama.5.4 - EQUIPO DE PROTECCIÓN:Utilización de equipamiento autónomo.

This translation is not available in English.

Page 6: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

9.

8.

7.

6.

6 9

MEDIDAS A TOMAR EN CASO DE VERTIDO ACCIDENTAL

6.1 - LIMPIEZA:Proceder a6.2 -PROTECCIÓN PERSONAL:No son necesarias medidas especiales.6.3 - PROTECCIÓN DEL MEDIO AMBIENTE:No son necesarias medidas especiales. Proceder a la recogida del producto.

MANIPULACIÓN Y ALMACENAMIENTO

7.1 - MANIPULACIÓN:No son necesarias medidas especiales.7.2 - ALMACENAMIENTO:Mantener el producto alejado de la luz solar directa, en ambiente seco y debidamenteordenado y fechado.7.3 - MATERIAL DE EMBALAJE:Compatible con cualquier material de embalaje usual.

LÍMITES DE EXPOSICIÓN / PROTECCIÓN PERSONAL

8.1 - EQUIPO DE PROTECCIÓN PERSONAL:No son necesarias medidas especiales para protección respiratoria ni paraprotección de manos, ojos o piel.

PROPIEDADES FÍSICAS Y QUÍMICAS

9.1 - FORMA / COLOR:Dimensiones y acabado según especificaciones del cliente.9.2 - OLOR:Inodoro.9.3 - CAMBIO DE ESTADO FÍSICO:Cantisa s.a. Dpto. Técnico (control de calidad) 7Temperatura de reblandecimiento VICAT: 78ºC.9.4 - DENSIDAD APARENTE:1.49 g/CC.9.5 - SOLUBILIDAD EN AGUA (20ºC):Insoluble.9.6 - SOLUBILIDAD EN OTROS DISOLVENTES:Soluble en THF.

Page 7: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

12.

11.

10.

7 9

9.7 - VALOR DE Ph:No aplicable.9.8 - INFLAMABILIDAD:No inflamable. Clase de combustión: BZ1 (no se propaga la combustióniniciada.9.9 - AUTOINFLAMABILIDAD:El producto no es auto inflamable.9.10 - RIESGO DE EXPLOSIÓN:Ninguno.9.11 - PRESIÓN DE VAPOR:No aplicable.9.12 - COEFICIENTE DE REPARTO n-OCTANO/AGUA:No aplicable.

ESTABILIDAD Y REACTIVIDAD

10.1 - TEMPERATURA DE DESCOMPOSICIÓN:Estable en condiciones normales de utilización.10.2 - PRODUCTOS DE DESCOMPOSICIÓN PELIGROSOS:En caso de incendio se pueden desprender vapores de HCl y otros productos originadosen la combustión de p.v.c.

INFORMACIÓN TOXICOLÓGICA

El producto es biológicamente inerte y no peligroso.Actualmente no se dispone de datos sobre efectos tóxicos.

INFORMACIÓN ECOLÓGICA

12.1 - PERSISTENCIA Y DEGRADABILIDAD:No es biodegradable.12.2. - POTENCIAL DE BIOACUMULACIÓN:No es bioacumulable.12.3. - ECOTOXICIDAD:El producto es biológicamente inerte y no peligroso.Actualmente no se dispone de datos sobre efectos tóxicos.

Page 8: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

16.

15.

14.

13.

8 9

CONSIDERACIONES SOBRE LA ELIMINACIÓN

Se recomienda el reciclado u otras formas de valorización de acuerdo a la legislacióncomunitaria.

INFORMACIÓN RELATIVA AL TRANSPORTE

Transporte según la reglamentación vigente.

INFORMACIÓN REGLAMENTARIA

Aplicable la normativa vigente.

OTRAS INFORMACIONES

El producto debería ser almacenado, manipulado y usado de acuerdo con las normas ydisposiciones vigentes de higiene laboral. Los datos contenidos en esta Hoja de Seguridadse basan en nuestros conocimientos actuales y muestran, sin compromiso, el comportamientode nuestros productos en los ensayos. En ningún caso los datos contenidos en esta Hojade Seguridad constituyen garantía de propiedades específicas.

Cantisa S.A.

Page 9: PVC PHYSICAL PROPERTIES - cantisa.es · 12.3. - ECOTOXICIDAD: El producto es biológicamente inerte y no peligroso. Actualmente no se dispone de datos sobre efectos tóxicos. 16

C/. Pintor Joaquín Sorolla, nº 8 • Polígono Industrial Ciudad Mudeco46930 Quart de Poblet (Valencia) España

Tel.: (+34) 961 597 242 • Fax: (+34) 961 597 243

e-mail: [email protected] www.cantisa.es