8/3/2019 Purl Ins

1/4

S T R E NGT H TO THE STRUCTURE

P P P P P ennar ennar ennar ennar ennar

PENNAR INDUSTRIES LIMITED(An ISO 9001:2000 Certified Company)

8/3/2019 Purl Ins

2/4

IntroductionPENNAR INDUSTRIES LIMITED, an ISO 9001: 2000 accredited company having four manufacturing plants located at Patancheru,Isnapur (both near Hyderabad), Chennai and Tarapur. PENNAR manufactures different steel products like Cold Rolled SteelStrips, Cold Roll Formed Steel Sections, Engineering components, Metal Crash barriers for Road safety and ERW Tubes.

Cold Roll Formed Steel Sections (CRFS) Division manufactures Products for Construction / Steel buildings / EPC industry (Metaldecking, Purlins & Runners, Roofing sheets, etc), Special sections & Panels for Automobile & Engineering industries, Longprofiled steel sheets such as Collecting and discharge electrodes for ESPs, Stringer channels for Material Handling industry,Trough floor & other sections for Railway wagons and coaches.

PENNAR PURLINS for Steel Buildings All over the world, engineers are now taking keen interest in using Structural Steel as the basic material of construction for fasttrack projects. Considering the higher strength to weight ratio of CRF Sections, PENNAR PURLINS became very popular in theconstruction of any steel building, whether it may be a simple storage shed or a complex Turbo Generator building in a powerplant. PENNAR PURLINS are well accepted by architects and structural consultants all over India.

We supply a wide variety of sections like C-Channels, Lip Channels, Z-Purlins, Multi-beams, Angles and various other contours,usually in thickness range upto 6mm. Sections can be supplied in various grades of steel.

PENNAR.. everywhereToday, there are more than 5000 buildings in India and abroad, where PENNAR PURLINS are used. Our clientele includesconstruction majors like L&T, Simplex, NCC, Gannon Dunkerly, Shapoorji Paloonji, Consolidated Construction Co, LloydInsulations for various projects in Power, Airports, Cement, Steel Plants, Metallurgical industries, Automobile, Textile, etc.

PENNARPURLINS

8/3/2019 Purl Ins

3/4

Thickness : 1.5mm to 6mmLength : upto 12000mmMaterial : CR Steel as per IS:513 / HR Steel as per IS:1079Yield Strength : 245 MPa to 345 MPaType :Bare, Primer coated, Galvanized, Painted

We supply the suitable size of purlins with pre-punched conditionand required cut-to-length as per customers specifications / drawings,for easy erection and also to avoid any wastage / rework at site.

50-80

1 5

- 2 5

1 0 0

- 3 0 0

50-59

1 2

5 -

2 5 0

55-66

1 8 0

- 2 7 0

60

60

1 4 0

- 2 5 5

76

Product Range

Equal Angle (90 0 )

Lip-Channels

C-Channels

Multi-Beam

Z-Purlin (45 0 Lip)

Z-Purlin (90 0 Lip)

Quality Policy We, at Pennar, are committed to producing

steel based products and associated servicefor customers all over the world.

We strive to achieve excellence in thequality of products we manufacture and theservice we provide to our customers.

It is our endeavour to creae a workingenvironment where motivated employeescommunicate freely and where innovationis encouraged to enable continualimprovement in all areas.

We work together to achieve CompleteCustomer Satisfaction through Total Quality Management.

4 0

- 3 0 0

40-100

20x20 to 100x100

8/3/2019 Purl Ins

4/4

Advantages of Pennar Purlins over conventional Hot Rolled SectionsHot Rolled Sections Pennar Purlins

Low strength-to-weight ratio Very high strength-to-weight ratio

Available without any surface finish Sections provided with painted, powder-coated,galvanized or polyurethane-coated surface finishdepending on customers requirements

Sections require frequent maintenance Sections are maintenance-free owing to applicationof proper surface finish

Self-weight requires heavier sections for the structures Light sections reduce dead load and consequently and its supports thereby increasing load on foundation lighter sections for structures and supports. Thus, the

load on foundation is bare minimum

High wastage since sections are available only in Sections are factory-finished to avoid wastagestandard lengths and shapes

Installation time high since sections need to be cut Factory-finished sections drastically reduce installationto length and fabricated at site time

Only standard sections available Optimum sections to meet exacting designspecifications: no over-design possible

Factor of safety as per specifications Additional factor of safety due to increase in yieldstrength by cold forming

OTHER CRFS BUILDING PRODUCTS

52 / 271 Decking profile75 / 230 Decking profile 44 / 130 Decking profile

35/248 Trapezoidal Roofing Profile 32/252 Trapezoidal Roofing Profile

P P P P P ennar ennar ennar ennar ennar

PENNAR INDUSTRIES LIMITED(An ISO 9001:2000 Certified Company)

A leading manufacturer & supplier ofCold Roll Formed Sections, Pressed Components,ERW Precision Tubes & Cold Rolled Steel Strips

CENTRAL MARKETING OFFICEIDA, Patancheru, Medak Dist - 502 319

Phone: +91 8455 242184-93, Fax: +91 8455 242424 / 242161E-mail: marketing@pennarindia.com

MARKETING OFFICES

Bangalore (080 23227703 / 23220667) Chennai (044 24893962)Coimbatore (0422 2539770) Faridabad (0129 2231235)

Hosur (04344 276874) Hyderabad (040 27766781)Indore (0731 2705075) Kolkata (033 24843138)Mumbai (022 25375493) Pune (020 25548660)

Tarapur (02525 272609 / 272517)

REGISTERED OFFICE

3rd Floor, Saptagiri Towers, Begumpet, Hyderabad - 500 016, India.Phone: +91 40 27766781, Fax: +91 40 27768056

Website: www.pennarindia.com