punit tripathi welding inspector

8
Resume Punit Kumar Tripathi ( ARAMCO APPROVED ) QC/Welding Inspector Objective Seeking a challenging profession where the knowledge and experience can be utilized in a reputed company with potential growth and to be enthusiastic in accomplishing the task assigned. Profile More than Nine (12) years of experience with the capacity of QC/ Welding Inspector, Consultant Engineer (Mechanical) in various industrial sectors, Oil & Gas, Petrochemical Plants, Refinery etc. worked in Saudi Arabia, Qatar, Kuwait, and India since 2003. Educational Qualification Diploma in Mechanical Engineering from AICET Mumbai with 69% marks in 2005. Professional Certification Certified Welding Inspector CSWIP 3.1 (Since 2012) Radiographic Testing ASNT Level II (Since 2008) Ultrasonic Testing ASNT Level II (Since 2008) Magnetic Particle Testing ASNT Level II (Since 2008) Liquid Penetrant Testing ASNT Level II (Since 2008) 1

Upload: punit-tripathi

Post on 16-Apr-2017

361 views

Category:

Documents


13 download

TRANSCRIPT

Page 1: Punit Tripathi Welding Inspector

Resume Punit Kumar Tripathi (ARAMCO APPROVED) QC/Welding Inspector

Objective

Seeking a challenging profession where the knowledge and experience can be utilized in a reputed company with potential growth and to be enthusiastic in accomplishing the task assigned.

Profile

More than Nine (12) years of experience with the capacity of QC/ Welding Inspector, Consultant Engineer (Mechanical) in various industrial sectors, Oil & Gas, Petrochemical Plants, Refinery etc. worked in Saudi Arabia, Qatar, Kuwait, and India since 2003.

Educational Qualification

Diploma in Mechanical Engineering from AICET Mumbai with 69% marks in 2005.

Professional Certification

Certified Welding Inspector CSWIP 3.1 (Since 2012)Radiographic Testing ASNT Level II (Since 2008)Ultrasonic Testing ASNT Level II (Since 2008)Magnetic Particle Testing ASNT Level II (Since 2008)Liquid Penetrant Testing ASNT Level II (Since 2008)

Work Experience: (12 years)

Company : Consolidated Contractors Company (KSA) W.L.L.Position : QC/ Welding InspectorDuration : 01 August 2015 to Till DateEngineering : PetrofacClient : Saudi Aramco Oil Company.Project : G.R.T.F. (Jazan Refinery Tank Form)

Job Responsibilities

To identify non-compliances and follow up with corrective actions. Visual inspection of non-destructive testing weld seems in accordance with standards.

1

Page 2: Punit Tripathi Welding Inspector

Welding Inspection as per Code & Standard. Quality Supervision/Control and Inspection of Piping Fabrication & Welding carried out by

the contractors. Planning for NDT as per relevant codes and clients requirement. Review and verification of Welding Procedure Specification submitted by subcontractors. witnessing Procedure Qualification as per Saudi Aramco Standards, ASME Sec IX, ASME

B31.3, API 5L, A 106 Gr B etc. Monitoring of weld repair. Ensure that QA/QC culture is visible across all project levels. Welder qualification, performance of welder & their certificate prepare. Preparation of inspection reports. Inspection of materials which includes receipt inspections and item identifications as per

specified drawings and specification.

Company : China Petroleum Jillin Chemical And Construction Saudi Co. Ltd .Position : QC/ Welding InspectorDuration : 29 June 2013 to 23 June 2014.Engineering : Samsung Engineering Saudi Arabia Ltd.Client : Saudi Aramco Oil Company.Project : Shaybah IGHC Package#4.

Job Responsibilities:

Welding Inspection as per Code & Standard. Quality Supervision/Control and Inspection of Piping Fabrication & Welding carried out by

the contractors. Review and verification of Welding Procedure Specification submitted by subcontractors &

witnessing Procedure Qualification as per ASME Sec IX, ASME B 31.3, API 5L Gr. B etc. Monitoring of weld repair. To identify non-compliances and follow up with corrective actions. Ensure that QA/QC culture is visible across all project levels. Welder qualification, performance of welder & their certificate prepare. Preparation of inspection reports. Visual inspection of non-destructive testing weld seems in accordance with standards. Inspection of materials which includes receipt inspections and item identifications as per

specified drawings and specification. Planning for NDT as per relevant codes and clients requirement. Checking weld joint preparation, fit up, dimensional inspection & alignment, Monitoring

Welding activities. Monitoring Pre heating, Post heating, Hardness Testing. Of pipe spools during fabrication &

erection. Preparing the Inspection Look Ahead Schedule. Reviewing as per ASME Sec IX, conduction welding procedure Qualification Tests &

Welder qualification test, ISO/Mechanical clearance of fabricated pipe spools & erected spools.

Inspection of material & Preparation of reports.

Company : Global Sources for General Contracting.Position : QC/ Welding Inspector

2

Page 3: Punit Tripathi Welding Inspector

Duration : 06 November 2011 to 02 August 2012.Engineering : Snamprogetti SA Ltd. Saudi Arabia.Client : Saudi Aramco Oil CompanyProject : Manifa Core Hydrocarbon Facilities

Job Responsibilities:

Quality Supervision/Control and Inspection of Piping Fabrication & Welding carried out by the contractors.

Co-ordination and control of the RFI, NCR and Non-confirmed Products and compile the required documentation in accordance with the Project Specifications

To co-ordinate and supervise the Inspecton Activities in specific area. To ensure that all actions, works and services undertaken by contractor are in accordance

with the respective Agreement with company. To ensure compliance with company’s objectives, requirements, priorities, policies,

procedures, standards, rules, regulations and guidelines provided by COMPANY. To ensure that cost effective solutions in engineering design are adopted while maintaining

quality, constructability, operability and maintainability. Preparation of inspection reports. Visual inspection of non-destructive testing weld seems in accordance with standards. Ensure that QA/QC culture is visible across all project levels. Monitor the site construction activities and report any non-conformance and the required

corrective actions. Review and verification of Welding Procedure Specification submitted by subcontractors &

witnessing Procedure Qualification as per ASME Sec IX, ASME B 31.3, A 106 Gr.B etc. To assist The QC Manager in all inspection activities and all quality requirements are

implimented.

Company : Consolidated Contractors Company (Kuwait) W.L.L.Position : QC/ Welding InspectorDuration : 10 February 2011 to 23 September 2011.Engineering : G.R.T.A. (KNPC)Client : K.N.P.C.Project : Shuiba Refinery (Kuwait)

Job Responsibilities

General repairing turn around. to make drawing as built as per Old existing line, demolition of old line, Inspection of new pipe lines, special concentration on P5, P7 & S.S. material pipe lines.

Preparing the Inspection Look Ahead Schedule. Welding Inspection as per Code & Standard. Quality Supervision/Control and Inspection of Piping Fabrication & Welding carried out by

the contractors. Visual inspection of non-destructive testing weld seems in accordance with standards. Ensure that QA/QC culture is visible across all project levels. Co-ordination and control of the RFI, NCR and Non-confirmed Products and compile the

required documentation in accordance with the Project Specifications Review and verification of Welding Procedure Specification submitted by subcontractors. Witnessing Procedure Qualification as per ASME Sec IX, ASME B 31.3, API 5L Gr B, A106

Gr B etc. Monitoring of weld repair.

3

Page 4: Punit Tripathi Welding Inspector

Planning for NDT as per relevant codes and clients requirement. Monitoring Pre heating, Post heating, Hardness Testing. Of pipe spools during fabrication &

erection. To ensure that cost effective solutions in engineering design are adopted while maintaining

quality, constructability, operability and maintainability.

Company : Consolidate Contractors Inte’l Co. (Qatar).Position : QC/ Welding InspectorDuration : 27 November 2009 to 09 February 2011.Engineering : JGC/KBRClient : Qatar ShellProject : Shell Pearl GTL Project.

Job Responsibilities

To ensure that cost effective solutions in engineering design are adopted while maintaining quality, constructability, operability and maintainability.

To co-ordinate and supervise the Inspecton Activities in specific area. Visual inspection of non-destructive testing weld seems in accordance with standards. Ensure that QA/QC culture is visible across all project levels. Monitor the site construction activities and report any non-conformance and the required

corrective actions. Provide input to the collection of Lessons Learned for the project Basic Qualifications. Review and verification of Welding Procedure Specification submitted by subcontractors. Witnessing Procedure Qualification as per ASME Sec IX, ASME B 31.3, API 5L Gr. B, A106

Gr.B etc. To assist The QC Manager in all inspection activities and all quality requirements are

implimented. Co-ordination and control of the RFI, NCR and Non-confirmed Products and compile the

required documentation in accordance with the Project Specifications

Company : Consolidated Contractors Teyseer JV. Limited. (Qatar)Position : QC/ Welding InspectorDuration : 19 April 2008 to 26 November 2009.Engineering : Chiyoda-Technip JVClient : Ras Gas Qatar.Project : Ras Gas/ AKG 2.

Job Responsibilities

To co-ordinate and supervise the Inspecton Activities in specific area. Visual inspection of non-destructive testing weld seems in accordance with standards. To identify non-compliances and follow up with corrective actions. Review and verification of Welding Procedure Specification submitted by subcontractors. Witnessing Procedure Qualification as per ASME Sec IX, ASME B 31.3, API 5L Gr B, A 106

Gr.B etc. To assist The QC Manager in all inspection activities and all quality requirements are

implimented. Preparing the Inspection Look Ahead Schedule. Monitoring Pre heating, Post heating, Hardness Testing. Of pipe spools during fabrication &

erection.

4

Page 5: Punit Tripathi Welding Inspector

To ensure that cost effective solutions in engineering design are adopted while maintaining quality, constructability, operability and maintainability.

Planning for NDT as per relevant codes and clients requirement. Monitor the site construction activities and report any non-conformance and the required

corrective actions

Company : Al-Hammam co. For Construction & Maintenance. (K.S.A.) Position : Welding SupervisorDuration : 18 January 2006 to 21 February 2008. Engineering : Snamprogetti, Japan Gas CorporationClient : Saudi Aramco Oil CompanyProject : Khursaniya gas Plant, hawiyah ngl Propane Plant,

Job Responsibilities

Planning for NDT as per relevant codes and clients requirement. Review and verification of Welding Procedure Specification submitted by subcontractors &

witnessing Procedure Qualification as per ASME Sec IX, ASME B31.3, API 5L etc. To identify non-compliances and follow up with corrective actions. Welder qualification, performance of welder & their certificate prepare. Visual inspection of non-destructive testing weld seems in accordance with standards. Checking weld joint preparation, fit up, dimensional inspection & alignment, Monitoring

Welding activities. Monitoring Pre heating, Post heating, Hardness Testing. Of pipe spools during fabrication &

erection. Preparing the Inspection Look Ahead Schedule. Preparation of punch list and its clearing. Co-ordinate with pressure testing people. Final punch clearing with client requirement. Assist pre commissioning group. Prepare as

built Drawings for final documentation procedure. Quality Supervision / control of piping fabrication, welding and erection as per the approved

isometrics, drawings etc.

Company : Reliance Engineering Associates Pvt. Ltd. Position : Consultant Engineer (Mechanical)Duration : 21 October 2003 to 27 April 2005. Engineering : Bechtel FranceClient : Reliance Industries Ltd. (Jamnagar) Project : Capacity Expansion of Crude, Job Responsibilities

To ensure that cost effective solutions in engineering design are adopted while maintaining quality, constructability, operability and maintainability.

To co-ordinate and supervise the Inspecton Activities in specific area. control of piping fabrication and erection as per the approved isometrics, drawings etc Dimentional Inspection of Piping spools and the inspection of Fit-ups. Preparation of hydrotest packages & Witnessing the Hydrotest of Pipings. Verifying the Piping system with the client as per Drawing. Provide all necessary tools equipment, materials, spools and pipe supports as per

requirement. Co-ordinate with Client supervisor for test pack clearance. Supervising the capability and the skill (performance) of the tradesman.

5

Page 6: Punit Tripathi Welding Inspector

Personal Information

Name : Punit Kumar TripathiNationality : IndianDate of Birth : 15th August 1981Passport No : L-1654517E-mail : [email protected] / [email protected] : +91-7388590322 (India)/

+966-597139852 (Saudi Aarabia)Permanent Address : Village- Sahuadih

Post - Deoria Pandey Via – PadraunaDistt. – Kushinagar (U.P.) INDIAPin – 274304

I solemnly declare that the information given above are true to the best of my knowledge and it will be supported by documents whatever required.

Place:Date : ( Punit Kumar Tripathi)

6