DYNEOS AGVogelsangstrasse 15CH-8307 EffretikonTel. 052 355 12 40 – Fax 052 355 12 44info@dyneos.ch

www.dyneos.ch

DYNEOSDynamic+Electro-Optical Solutions

AG

NEWSDYN 2010

This laser has been developed to offer the higheststandards in term of precision, quality and ease of use.

Here are some construction points where FineAdjustment, based on their long experience inpulsed dye laser, has specially taken care of:1. High quality ball bearing for angular and linear

adjustments2. Precise and fast motor drives for grating

and crystals3. High mechanical rigidity of the base4. High stability and resolution of the optical

mounts for precise adjustments5. State of the art control through USB, TCP/IP,

LabView

This solid background allows the system to reachthe best performances in wavelength resolutionand long term stability.

“Pulsare” laser systems covers the wavelength range from 198nm to 4µm through harmonics generation and frequency mixing.

Linewidths from 0.1cm-1 to < 0.03cm-1 are available.

Last but not least, the “heavy” dyepump insure astable, low noise operation….

NEWFine Adjustment from Germany

Pulsare: the new milestone in pulsed Dye-Laser

www.dyneos.ch

NEW1 kHz,Tunable OPO

1kHz tunable OPO covers 210nm to 2300nmThe new kHz tunable laser system integrated ina single compact housing is a diode pumped OPOQ-switched laser. Efficient UV conversion makesthe NT200 series an excellent choice for a widerange of applications: spectroscopy, photobiology,LIF, photolysis, remote sensing, LIDAR and manyothers. Virtually no warm-up time (a few seconds)ensure friendly, simple and reliable operation. The NT200 series are controlled by computerusing the supplied LabView drivers and/or theuser-friendly remote control pad.• No wavelengthsgap while tuning from 210

to 2300nm • 1000Hz repetition rate • More than 50mW output power in UV • -1 linewidth • 5-10ns pulse duration

NEWEasy femtoseconds

Mantis is …• An ultra broadband (>70nm) Modelocked

Ti:Sapphire oscillator• Short pulse (<20fs compressed)• One-box (integrated OPSL pump)• Compact• High performance• Fixed operating point

Mantis is the cost effective choice in highperformance broadband oscillators.

Mantis

NEWSmart

CPC (Compact Pulse Compressor)• Ultra compact footprint (4.1” x 7.6”) • Based on chirped mirror technology• Coarse and fine GDD control for precise

compensation from -440fs2 to -2640fs2

• In-line input and output ports• Pre-compensates for positive dispersion from

downstream optics (>55mm of fused silica)

<5cm

www.dyneos.ch

NEWeasy UF diagnostics

The new LX SPIDER is a compact and robustinstrument for complete spectral and temporal

LX spider

Chameleon™ VisionThe new Chameleon™ Vision is a fully-integratedlaser source for Multiphoton Excitation (MPE)microscopy that delivers both state-of-the-art imagequality and superior ease of use. This is achievedbecause the Chameleon Vision combines the widesttuning range, the highest power, already shown

Chameleon OPOThe new Chameleon OPO offers the opportunityto use the Chameleon output from 730nm to880nm and the OPO output simultaneously. Itopens the possibility to do dual wavelengths MPEfluorescence as well as CARS applications.

by the successful Chameleon Ultra II, together withthe highest group velocity dispersion (GVD) compen-sation, an excellent pointing stability, and the smallestfootprint of any true one-box MPE light source. • Hands-free operation• Sealed maintenance-free design• Ultrawide tuning range (680 to 1080nm)• Automated dispersion precompensation in a

single box• Fully-controllable dispersion precompensation

down to 0 at all wavelengths• High output power (up to >2.5W)• Ultra wide GDD range from 0 to >47,000fs2

• Simple menu-driven GUI or RS-232 operator interface for laser and precompensation features

• On-board spectrometer with simple USB interface shows wavelength

NEWpre-comp,0-47'000fs2

characterization of femtosecond laser pulses.Based on a patented technology, LX SPIDERmeasures the temporal amplitude and phase derivedin real-time from the spectral values.Due to the drastically simplified set-up LX SPIDERis smaller than a shoe box, while easy to alignand operate. Offering real-time operation LX SPIDER is theideal tool for adjustment of complex ultrafastarrangements like amplifiers and pulse compressors.

www.dyneos.ch

NEWHigh reliability forhigh cw power

NEWRobust, reliable,compact

NEW25W@1064nm SLM

Genesis family: the new high-power OPSL

The Verdi G-Series

VERDI IR

Genesis is a unique portfolio of high-power cwlasers spanning from the visible to the UV spectrum– all based on OPSL technology. Genesis enablesa new set of applications by leveraging the wave-length scalability of OPSL. Together with theSapphire family, Coherent can offer solid-statesolutions for true cw applications in the UV andVIS range. Currently we offer up to 100mW at 355nmfor applications like flow cytometry, confocalmicroscopy, drug discovery or rapid prototyping. High-power multimode versions with up to 8W greenand 5W yellow are especially dedicated for OEMapplications in ophthalmology or for light shows. For scientific applications there is also a low-noise(>0.06%) 2W TEM00, green version available,optional for holography even with a SLM.

Coherent introduces the next generation of diode-pumped solid-state lasers – the new Verdi G-Series,currently made up of the Verdi G2, G5 and G7lasers. The Verdi product family has set the standardin optical pumping for over 10 years, and combinesVerdiʼs performance with Coherentʼs patentedoptically-pumped semiconductor (OPSL) technologyto create the most advanced series of pump lasers.The patented technology removes the rod-based

The Verdi IR is a new addition to the product.The system produces 1064nm light and is designedwith a PZT that can tune the output single fre-quency over a small range. Applications include:• • Atom cooling & trapping • Optical tweezers• CW mid-IR OPO pumping or other laser

(Cr:Fosterite)

Specifications:• 25.0W Output Power• M2 <1.1• ±1% Power Stability (2 hours)

gain material and replaces it with a robust andversatile semiconductor chip. The result is a smallerand inherently more reliable laser with wavelength

possible at thesepowers. Withhundreds of highpower OPSLunits (>5W) inthe field andthousands of hours, the Verdi G-Series continuesthe legacy of outstanding Verdi performances.

• <0.04% RMS Noise (10Hz to 1GHz)• <2.5MHz Linewidth• 15.0 - 25.0W SLM Operation (Mode-Hop Free)• >3.2GHz PZT Tuning Range

SECOND HARMONICGENERATION

Filter

PUMPLASERDIODE

OPS chip

options never before

www.dyneos.ch

NEWAOM enables custom selection of pulses

“Surf Master” laser marking systems are efficienttools for creating patterns on the surface of almostany material by using UV radiation at 355nm.The high photon energy allows marking most ofthe plastics, glass and sapphire with higher contrast,higher quality and faster processing speed withoutputting additional pigment to the material.

• up to 100kHz repetition rate • Fast galvo scanner • down to 25micron spot size • 100mm x 100mm working area

Talisker is a newfamily of high peakpower and highaverage powerpicosecond lasersdesigned specifi-cally for materials

processing. Based on a scalable fiber laser plat-form Talisker is designed for an industrial environ-ment and meets availability requirements ofdemanding industries. Minimizing thermal dama-

ge and heat affected zone enables a new rangeof high precision applications.• High peak power picosecond pulses for high

precision micromachining• Fiber-based technology• Parallel beam exitports for 1064nm, 532nm

and 355nm• Industrial reliability• Excellent beam quality (M2 <1.3)• Integrated AOM for pulse selection and control• PermAlign™ solder-bonded optics technology• Ultra-long-life AAA™ (Aluminum-free Active

Area) laser diode material

Talisker

Micromachining Work-station - PicoMaster

UV marking System - SurfMaster

The heart of the system is a diode pumped pico-second laser, which is working up to 100kHzrepetition rate . An advanced optical set-up ensuresa spot size down to 5µm. A full automatic controlunit makes it easy to use. The software can becustomized for integration into an existing envi-ronment to a specific process or application. Therigid vibration-isolated granite platform ensuresrobustness and reliability and the enclosure com-plies with the Class 1 laser-safety and clean-roomrequests.

NEWGreat accuracy

NEWps and ns micromachining

www.dyneos.ch

NEWcost-effective UV and 532nm power

The MATRIX™ Q-Switched laser serie offers new, cost-effective, versatile Q-S platform formicromachining, microelectronic and markingapplications @355nm and @532nm. It combinesCoherentʼs patented PermAlign™ technique andthe knowledge of semi-automated, high-volumemanufacturing to produce a reliable and consistentproduct in large quantities.The MATRIX™ family covers the UV powerrange from 500mW to 2W with repetition rates of20kHz & 60kHz, and 7W@523nm at 30kHz or8W at 100kHz.

Matrix UV and “Green”

NEWNetwork Connected

NEWnew catalogue now available

LabMax™ Power and Energy Meters• Directly compatible with LM- and PM-model

sensors• Beam position display with LM-model quad

thermopiles• Pulse energy measurement to 10kHz• USB, RS232, Analog out, and external trigger • Data logging to onboard memory, a USB Flash

drive or a PC

Diamond E-SerieDIAMOND E-Serie is the first sealed, pulsedCO2 laser serie to offer average power up to1000W in a fully integrated, compact package.Incorporating the RF power supply within thelaser head completely eliminates the RF umbilical in the Diamond E-Serie, increasinglaser reliability and simplifying its integration intoa workstation or robotic tool. In addition to itsinherent reliability and long lifetime, cost ofownership of the Diamond E-Serie is further optimized. Improved serviceability minimizesdowntime. The Diamond E-product range offers150W, 400W and 1000W.

• High peak power• Fast rise-and-fall time• Outstanding beam quality• Excellent power stability• Compact design• Equipped with on-board internet-accessible

diagnostics and control

a

www.dyneos.ch

NEW versatile and easyto use

• Fiber coupled vibrometer combined with precision technical microscope

• Flexible sample positioning• Wide positioning range of 50mm x 50mm, • Object monitoring on PC by USB Camera• Different objectives (10x,50x) can be used • Laser spot diameter < 2 µm with 50x objective• DC deflection measurements as well as

spectral analysis up to MHz are possible• Triggering options for data acquisition• Subnanometer resolution• Customized configuration is possible

Nano Vibration Analyser

The laserinterferometric vibrometer is an idealinstrument for accurate, non-contact determinationof temporal changes in the positions of objectsor surfaces of arbitrary roughness. It detectsmechanical vibrations at frequencies rangingfrom 0 to 500kHz with subnanometer resolution.These instruments have been designed basedon the proven concept of our SP-S Series laser-interferometeric vibrometers. The working distanceof the LSV-Series vibrometer can be adjustedcontinuously in a wide range by a zoom objective.

The complete system consists of a compactlydesigned fiberoptic-coupled sensor head, amodularly designed electronics unit incorporatinga He-Ne laser, and various interfaces.The fiber-coupled interferometer converts motionsalong the optical axes into interference fringesthat are transmitted to fast, high-resolution,demodulation electronics for processing.Operation and display of results employs a PCrunning specialized data analysis software.

• High precision vibration analysis and length measurement system

• Noncontact measurements • Flexible installation • Adaptable to suit customers' needs • Fiberoptic coupling of the laser beam (eliminates

thermal influences on measurement results)• Correction of ambient conditions • Easy to align and use • Includes FFT spectrum-analysis software

Contactless Vibration Measurements

www.dyneos.ch

NEWask for the newcatalogues from PI

Compact & Cost-effectiveStepper-Mike Linear Actuators M-228

• 10mm travel range• Cost effective combination with MercuryStep™

Controller• Include non-contact limit and reference switches

High-speed Positioning with PILine™ StagesM-683 translation stages are low-profile, high-accuracy positioning systems based on the M-674RodDrive ultrasonic linear motor actuator. Theycombine the advantages of its high-performance,high-speed drive with a high-precision guidingsystem and the superior accuracy of a direct-metrology linear encoder providing 0.1µm reso-lution.• Integration of the Powerful PILine® RodDrive • Low Profile, Compact Dimensions • Max. Velocity 350 mm/s

• Up to 7 N Pushing Force • Direct Metrology Linear Encoder with 0.1µm

Resolution • Non-Magnetic and Vacuum-Compatible

Versions Available

NEXACT® Piezo Motors for OEM IntegrationThe new N-310 Piezo Stepping Drive combinesthe advantages of the Ultrasonic PILine® Drivesand the NEXLINE® PiezoWalk principle:• Long travel ranges (20mm standard)• Resolution in the subnanometer range • Compact dimensions • High drive forces (10N standard)• High dynamic performance with sub-microsecond

response • Self-locking when powered down; no holding

current • Zero backlash, no wear or maintenance, no

mechanical components like gears or leadscrews. • Non-magnetic and vacuum-compatible

operating principle

Together with the E-861 controller we can offer a complete solution. It supports both modes ofoperation: stepping mode for longer moves andanalog mode for moves < 7µm which provideshigh-dynamics positioning with resolutions of lessthan 1nm. The NEXACT® drive design minimizespiezo operating voltages to 45V and below.

www.dyneos.ch

NEWTip/Tilt Scanners

Mercury™III servo motor controller now with USB

Piezoelectric scanner S-330 with scan anglesup to 1.2°

The latest generation Mercury™ C-863 servomotor controller is even more powerful and versatile than its predecessors. Easy data inter-change with laptop or PC is possible via theUSB interface. The RS-232 interface providesfor easy integration in industrial applications. The compact design with its integrated amplifiermakes it ideal for building high-performance,cost-effective micropositioning systems.

• High Performance at Low Cost • DC Servo-Motor Controller Supplies up to 30W • 20MHz Encoder Input for High Speed &

Resolution • Macro Programmable Stand-Alone Functionality • Non-Volatile EEPROM for Macros and

Parameters • Digital I/O Lines (TTL), Motor-Brake Control

PI has added tip/tilt ranges of 5mrad and10mrad to the S-330 series. All models haveresonance frequencies of > 3kHz and allow veryfast scanning, identical for both axes dues to thesymmetrical design. With integrated sensors youcan achieve precise and stable positioning with0.05µrad resolution. Applications include:• fast optical switching • active & adaptive optics• laser beam steering and stabilization, scanning• interlacing and dithering• correction of polygon mirror scanners• image stabilization

It is available with the new E-616 controller. Thecoordinate transformation is hardware-made andtherefore the user can command directly the scan angle without any additional softwarecalculations.

• USB and RS-232 Interface, Optional Joystick for Manual Control

• Works with all PI micropositioners

Use of inverse piezo effectThis converts an electrical potential into mechanicalmotion.

• Micro- and nanopositioning• Active vibration damping• Micro pumps• Pneumatic valves• Signal generator (buzzer)• High-voltage sources / transformers• High power ultrasonic generators

www.dyneos.ch

Piezoelectric Components for OEM Applications.PI Ceramic is the ceramic division of PhysikInstrumente (PI) and produces a wide range ofPZT ceramics: "hard" PZT (i.e. PIC 181) for highpower ultrasonic or piezomotor applications or"soft" PZT (i.e. PIC 255) for translators, sensorsor transducers. Typical OEM customers haveannual needs of several 100 to a few 10'000 units.

Examples of PZTelements: discs,rings, tubes, plates or shearelements.

Use of direct piezo effectThis converts mechanical forces from pressure, strainor acceleration into an electrical potential.

• Accelerometers• Igniters• Generators• Passive damping• Acoustic and ultrasonic receivers• Noise analysis• Acoustic emission spectroscopy

Use of both effects• Level measurement• Flow-rate measurement• Medical diagnostics

• High-resolution material testing• Sonar and echo sounders• Adaptive structures

OEM products for medical instruments

Ultrasonic applications in medicineMost of the applications in life science are basedon the inverse piezo effect: medical diagnostics(ultra sound imaging), ultrasound therapy, dentalplaque removal, scalpels for eye surgery(Glaucom treatment). New applications includemicro pumps, aerosol production, ultrasonopho-resis. Normally "hard" PZT elements formed asdiscs, rings or plates are used and we supply allkind of geometries and sizes.

Ultrasonic flow rate measurementA more complex application is the measurementof the flow rate of liquids or gases. The PZT ceramicis used as transmitter and receiver. We can offerthe simple ceramic discs or higher integrated sub-assemblies customized to your needs. It isimportant to start the collaboration for the development of such special components at thebeginning of the project as the electronic and thetransducer have to be designed together to get a good performance of the system.

Ultrasonic flowmeters, working principles

Use of inverse piezo effectThis converts an electrical potential into mechanicalmotion.

• Micro- and nanopositioning• Active vibration damping• Micro pumps• Pneumatic valves• Signal generator (buzzer)• High-voltage sources / transformers• High power ultrasonic generators

www.dyneos.ch

Piezoelectric Components for OEM Applications.PI Ceramic is the ceramic division of PhysikInstrumente (PI) and produces a wide range ofPZT ceramics: "hard" PZT (i.e. PIC 181) for highpower ultrasonic or piezomotor applications or"soft" PZT (i.e. PIC 255) for translators, sensorsor transducers. Typical OEM customers haveannual needs of several 100 to a few 10'000 units.

Examples of PZTelements: discs,rings, tubes, plates or shearelements.

Use of direct piezo effectThis converts mechanical forces from pressure, strainor acceleration into an electrical potential.

• Accelerometers• Igniters• Generators• Passive damping• Acoustic and ultrasonic receivers• Noise analysis• Acoustic emission spectroscopy

Use of both effects• Level measurement• Flow-rate measurement• Medical diagnostics

• High-resolution material testing• Sonar and echo sounders• Adaptive structures

OEM products for medical instruments

Ultrasonic applications in medicineMost of the applications in life science are basedon the inverse piezo effect: medical diagnostics(ultra sound imaging), ultrasound therapy, dentalplaque removal, scalpels for eye surgery(Glaucom treatment). New applications includemicro pumps, aerosol production, ultrasonopho-resis. Normally "hard" PZT elements formed asdiscs, rings or plates are used and we supply allkind of geometries and sizes.

Ultrasonic flow rate measurementA more complex application is the measurementof the flow rate of liquids or gases. The PZT ceramicis used as transmitter and receiver. We can offerthe simple ceramic discs or higher integrated sub-assemblies customized to your needs. It isimportant to start the collaboration for the development of such special components at thebeginning of the project as the electronic and thetransducer have to be designed together to get a good performance of the system.

Ultrasonic flowmeters, working principles

www.dyneos.ch

Photonic and plasmonic characterization withthe Optometronic™ 4000SPM Systems with more than one probe that canimage independently have always been a dream. This dream has become a reality with theMultiView 4000™ with its AFM, NSOM andSPM multiprobe capabilites and it's optical andelectron optical compatibility. • Independent scanning of up to four probes for

atomic force, near-field optical and all known probes for scanned probe imaging modes

• Unique probes for multiple probe resistance measurements with two, three and four point probe geometries

• Unique thermal probes for multiple probe measurements

• Multiple probe near-field optical (NSOM or SNOM) measurements

• Multiple probe nanochemical writing on a varietyof structures with a variety of gaseous, liquid or solid inks with Fountain Pen Nanochemistry™

• Multiple probe nanoindentation with on-line ultra high resolution atomic force imaging of the indented structure

• Multiple probe optical or thermal desorption withtandem collection for mass spectral analysis

Optical Integration• Full integration with upright, inverted or dual

(4 Pi) optical microscopes • Full integration with non-linear and multi-

photon microscopes • Completely free optical axis from above and

below the sample • Complete freedom of optical microscope nose

piece rotation from above or below • Open system architecture providing Transmis-

sion, Reflection and Collection modes

www.dyneos.ch

Your contacts at Dyneos AG

Stephan Zürcher

SalesSZ@dyneos.ch052 355 12 42

Pierre-FrançoisDucommun

SalesPFD@dyneos.ch024 445 57 70

RaffaelFavaretto

SalesRF@dyneos.ch024 445 57 74

Petre Birza

ServicePB@dyneos.ch076 330 57 93

Kathrin Kummer

Order ProcessingKL@dyneos.ch052 355 12 41

Inside Dyneos Olivier Charpié,laser expert,installing andfixing systemssince more than30 years hasdecided to retire

at the end of 2008. Having started with the ionlasers where the tube was made of glass andcarbon and lasting for a few 100s of hours (nicetime for tubes suppliers!), he became so familiarwith these instruments that a university professortold us that Olivier knew all screws of the laserby its first name!He followed during his long and faithful activitythe trend of the laserʼs technology getting moreand more complex, but also more reliable, untilthe state of the art in the diode pumped solidstate lasers.Now Olivier decided to spend his time with hisfamily and also to fix his …model railroad wagons!Please join our company to thank Olivier for hisextraordinary constancy and fidelity and to wishhim a nice time in his new activities.Some of you had already been in contact withPetre… he is the guy who is going to challengeOlivierʼs history!

Dr. Petre Birza, Physicist, owning a PhD from theUniversity of Basel, did his post- doc in France.He had already a solid background in lasersbefore he joined Dyneos in August 2008 and followed several product trainings at our supplierʼsfacilities. Petreʼs “schwitzertütsch” is at this time"to be enhanced”. But you can talk to him inEnglish or French!Please join us welcoming Petre and wish him asuccessful start.

We are also glad to announce a new team member to increase our sales forces. RaffaelFavaretto studied Microengineering at the EPFL,where he obtained his Master degree in 2007.After gaining experience in the industry, he started into sales in the micropositioning domain.He started at Dyneos in June 2009 and will beyour new contact as a specialist for positioningapplication.