pulpdent crown and bridge solutionsdspconnect.s3.amazonaws.com/pulpdent/crown_bridge... · dentin...
TRANSCRIPT
PULPDENT®
Crown and Bridge Solutions
Tuff-Temp™Provisional Veneer, Crown & Bridge Resin
Tuff-Temp’s advanced rubberized-urethane™ chemistry provides a precision material with greater strength and dimensional stability, and tighter fitting provisional restorations, than acrylics and bis-acrylics. Breaking and de-bonding are minimized or eliminated. The material grinds to crisp margins without softening or distorting. Upon removal, tissue condition is excellent. Tuff-Temp is ideally suited for single units, implants, long span and long-term provisionals.
Spee-Dee™ Build-UpMulti-purpose Core & Tooth Build-Up Resin
Spee-Dee™ Build-Up provides a monoblock system for post cementation, core build up and restoring missing tooth structure. Formulated with patented Embrace™ resin chemistry, Spee-Dee is moisture tolerant and has self-etching and self-adhesive properties. It is dense like dentin and is guaranteed to mimic dentin when cutting. Try Spee-Dee and you will immediately see the difference.
Embrace™ WetBond™ Resin CementEmbrace™ Resin Cement is indicated for PFM, gold, and reinforced ceramics for crown and bridge; gold, metal, titanium and fiber posts; and for inlays. Embrace is moisture tolerant, self-adhesive and self-etching to dentin and has the strength, durability and low solubility expected of resin cement. Embrace is an ionic resin formulated from a patented chemistry that etches, ionizes and adheres to tooth structure forming a strong resin-hydroxyapatite complex.
Dual Cure• Tough, resilient, impact and fracture resistant• Tight fitting temps grip teeth securely• Crisp, accurate margins• Ideal for multiple units and implant cases• Self-cure with fast light cure option
Dual Cure - Fluoride Releasing - Radiopaque• Cuts like dentin (or your money back)• Self-adhesive and self-etching properties• Moisture tolerant• Post cement and core build up resin• Automix cartridge
Dual Cure - Fluoride Releasing - Radiopaque• Self-adhesive• Self-etching to dentin• Moisture tolerant• Eliminates microleakage• Reduces sensitivity
PULPDENT® Corporation
PULPDENT®
Crown and Bridge Solutions
Tuff-Temp™Provisional Veneer, Crown & Bridge Resin
Working time: 45 secondsInitial self-cure setting time: 90 seconds after insertion in the mouthFinal self-cure setting time: 2:45 minutes after removal from the mouth (5 minutes from beginning of mix)
Light cure Setting time: 20 seconds
Spee-Dee™ Build-UpMulti-purpose Core & Tooth Build-Up Resin
Working time: Oxygen inhibitedSelf-cure setting time: 3:15 minutes at 37°CLight cure setting time: 20 seconds
Embrace™ WetBond™ Resin CementWorking time: Oxygen inhibitedSelf-cure setting time: 3:15 minutes at 37°CLight cure setting time: 20 seconds
Tuff-Temp™ Provisional Veneer, Crown & Bridge Resin
50 mL automix cartridge, 20 mix tips, 3 mL Glaze, 1.2 mL Add-on
TTA1 A1 shadeTTA2 A2 shadeTTA3 A3 shadeTT35 A3.5 shadeTTB1 B1 shadeTTB Bleach shade
SBU50 – 50 mL automix cartridge, 30 mix tips, 30 intra-oral tips
SBU - 25 mL automix cartridge, 20 mix tips, 20 intra-oral tips
Low ViscosityEMCA – Low viscosity automix syringe kit: 7 gm resin cement, 20 mix tips, 1.2 mL each Seal-n-Shine and OxOut + accessories
Medium ViscosityEMCM – Medium viscosity automix syringe kit: 7 gm resin cement, 20 mix tips, 1.2 mL each Seal-n-Shine and OxOut + accessories
PULPDENT® Corporation T (800) 343-4342 • T (617) 926-6666 • F (617) 926-6262 • [email protected]
80 Oakland Street • Watertown, MA 02472 • USA • www.pulpdent.com
5 mL automix syringe, 8 mix tips, 3 mL GlazeTT5A1 A1 shadeTT5A2 A2 shadeTT5A3 A3 shadeTT5A35 A3.5 shadeTT5B1 B1 shadeTT5B Bleach shade
Tuff-Temp Provisional Glaze
TTG 6 mL bottle
EMCAR – Low viscosity automix syringe refill: 7 gm resin cement, 20 mix tips
EMCMR – Medium viscosity automix syringe refill: 7 gm resin cement, 20 mix tips
EMCAR2 – Low viscosity automix syringe refill: 3.5 gm resin cement, 10 mix tips
EMCMR2 – Medium viscosity automix syringe refill: 3.5 gm resin cement, 10 mix tips