1

PUBLICATIONS THAT THE STAFF OF HIGHLY FILLED MATERIALS INSTITUTE HAVE CONTRIBUTED TO: 1. Mark J. Mezger, Kay J. Tindle, Michelle Pantoya, Lori J. Groven and Dilhan M. Kalyon, Editors, “Energetics Materials: Advanced Processing Technologies for Next-Generation Materials”, CRC Press, Taylor and Francis Group, Boca Raton, FL (2017). ISBN 9781138032507. 2. Discussion of paper by Y.Wang, J. He, S. Aktas, S. A. Sukhishvili, and D. M. Kalyon, entitled ‘Rheological behavior and self-healing of hydrogen-bonded complexes of a triblock Pluronic copolymer with a weak polyacid’, J. Rheology, 61, 6, 1121-1121 (2017) 3. E. Sahin and D. Kalyon, “The rheological behavior of a fast setting calcium phosphate bone cement and its dependence on deformation conditions”, Journal of the Mechanical Behavior of Biomedical Materials, 72, 252-260 (2017). doi.org/10.1016/j.jmbbm.2017.05.017. 4. M. Nie, D. Kalyon, K. Pochiraju and F. Fisher, "A controllable way to measure the interfacial strength between carbon nanotube and polymer using a nanobridge structure", Carbon, 116, 510-517 (2017). doi.org/10.1016/j.carbon.2017.02.014. 5. Y. Wang, S. Aktas, S. A. Sukhishvili and D. M. Kalyon, “Rheological behavior and self-healing of hydrogen-bonded complexes of a triblock Pluronic® copolymer with a weak polyacid”, J. Rheology, 61, 6, 1103-1119 (2017). 6. S. Senturk-Ozer, S. Aktas, J. He, F. T. Fisher and D. M. Kalyon, “Electrospinning of suspensions of poly(caprolactone) and multi-walled carbon nanotubes: Effects of processing parameters on the dynamics of the spinning process and fiber characteristics”, Nanotechnology, 28, 025301 (2017) doi:10.1088/0957-4484/28/2/025301.

7. R. Chang, F. Tourlomousis, H. Ding, and D. Kalyon, “Melt electrospinning writing process guided by a “Printability Number”", ASME Journal of Manufacturing Science and Engineering, 139, 081004-1-15 (2017).

8. E. F. Medina-Bañuelos, B. M. Marín-Santibáñez, J. Pérez-González, M. Malik and D. M. Kalyon, “Couette flow of a viscoplastic microgel with wall slip”, J. Rheology, 61, 1007-1022 (2017). 9. Jose Fabian Ortega-Avila, José Pérez-González, Benjamín M. Marín-Santibáñez, Francisco Rodríguez-González, Seda Aktas, Moinuddin Malik and Dilhan M. Kalyon, “Axial annular flow of a viscoplastic microgel with wall slip”, J. Rheology, 60, 3, 503-515 (2016). DOI:10.1122/1.4945820 10. J. I. Ganapathi, F. T Fisher, and D. M. Kalyon, “Distributive mixing of carbon nanotubes in poly(caprolactone) via solution and melt processing: Viscoelasticity and crystallization behavior versus mixing indices”, J. Polym. Sci. Part B: Polym. Phys., 54, 21, 2254-2268 (2016). doi:10.1002/polb.24137. 11. J. I. Ganapathi, D. M. Kalyon and F. T. Fisher, “Effect of multistage sonication on dispersive mixing of polymer nanocomposites”, J. Appl. Polym. Sci., 44681 (2016). DOI: 10.1002/APP.44681 12. C. Erisken, D. Kalyon, J. Zhou, S. G. Kim, and J. J. Mao, “Viscoelastic properties of dental pulp tissue and ramifications on biomaterial development for pulp regeneration”, Journal of

2

Endodontics, 41, 10, 1711-1717 (2015). (Honorable Mention award of Journal of Endodontics 2016) doi:10.1016/j.joen.2015.07.005 13. M. Nie, D. Kalyon, F. Fisher, "Reverse kebab structure formed inside carbon nanofibers via nanochannel flow", Langmuir, 31, 10047-10055 (2015). DOI: 10.1021/acs.langmuir.5b02042 14. N. Degirmenbasi, S. Coskun, N. Boz, and D. Kalyon, “Biodiesel synthesis from canola oil via heterogeneous catalysis using functionalized CaO nanoparticles”, Fuel, 153, 620-627 (2015). DOI:10.1016/j.fuel.2015.03.018 15. H. T. Kahraman, H. Gevgilili, E. Pehlivan and D. M. Kalyon, “Development of an epoxy based intumescent system comprising of nanoclays blended with appropriate formulating agents”, Progress in Organic Coatings, 78, 208-219 (2015). DOI: 10.1016/j.porgcoat.2014.09.002 16. N. Boz, N. Degirmenbasi and D. Kalyon, “Esterification and Transesterification of Waste Cooking Oil over Amberlyst-15 and Modified Amberlyst-15 Catalysts”, Appl. Catal. B: Environ., 165, 723-730 (2015). DOI: 10.1016/j.apcatb.2014.10.079 17. S. Senturk-Ozer, T. Chen, N. Degirmenbasi, H. Gevgilili, S. G. Podkolzin, D. M. Kalyon, “Nanobursa mesh: Graded electrospun nanofiber mesh with metal nanoparticles on carbon nanotubes”, Nanoscale, 6, 8527-8530 (2014). doi: 10.1039/c4nr01145g. 18. S. Aktas, D. M. Kalyon, B. M. Marín-Santibáñez and J.Pérez-González, “Shear viscosity and wall slip behavior of a viscoplastic hydrogel”, J. Rheology, 58, 2, 513-535 (2014). DOI:10.1122/1.4866295 19. M. Malik, D. M. Kalyon, and J. C. Golba Jr., “Simulation of co-rotating twin screw extrusion process subject to pressure-dependent wall slip at barrel and screw surfaces: 3D FEM Analysis for combinations of forward- and reverse-conveying screw elements”, International Polymer Processing, 29, 1, 51-62 (2014). DOI:10.3139/217.2802 20. S. Aktas, H. Gevgilili, I. Kucuk, A. Sunol and D. M. Kalyon, “Extrusion of foams from engineering plastics using supercritical CO2”, SPE Plastics Research Online, 10.2417/spepro.005185 (2014).

21. N. Degirmenbasi, N. Boz and D. Kalyon, “Biofuel production via transesterification using sepiolite-supported alkaline catalysts”, Applied Catalysis B: Environmental, 150-151, 147-156 (2014). 22. D. M. Kalyon and S. Akta�, “Factors affecting the rheology and processability of highly filled suspensions”, Annual Rev. Chem. Biomol. Eng, 5, 229–254 (2014). 23. D. M. Kalyon, C. Erisken, S. Ozkan, A. Ergun-Butros, X. Yu, H. Wang, A. Valdevit and A. Ritter, “Functionally-graded polymeric graft substitutes and scaffolds for tissue engineering can be fabricated via various extrusion methods”, J. Tissue Sci. Eng., 5, 1 (2014). e128. doi:10.4172/2157-7552.1000e128.

3

24. M. Nie, D. M. Kalyon, F. T. Fisher, “Interfacial load transfer in polymer/carbon nanotube nanocomposites with a nanohybrid shish kebab modification”, ACS Applied Materials & Interfaces, 6, 17, 14886-14893 (2014). DOI: 10.1021/am501879q 25. S. Aktas, H. Gevgilili, I. Kucuk, A. Sunol and D. M. Kalyon, “Extrusion of poly(ether imide) foams using pressurized CO2: Effects of imposition of supercritical conditions and nanosilica modifiers”, Polymer Engineering and Science, 54, 9, 2064-2074 (2014). DOI 10.1002/pen.23753 26. I. Kucuk, H. Gevgilili and D. Kalyon, “Effects of dispersion and deformation histories on rheology of semi-dilute and concentrated suspensions of multi-walled carbon nanotubes”, J. Rheology, 57, 1491-1514 (2013). DOI: 10.1122/1.4819745. 27. R. Junka, C. M. Valmikinathan, D. M. Kalyon, X. Yu, “Laminin functionalized biomimetic nanofibers for nerve tissue engineering”, Journal of Biomaterials and Tissue Engineering, 3, 4, 494-502 (2013). DOI: 10.1166/jbt.2013.1110. 28. X. Chen, A. Ergun, H. Gevgilili, S. Ozkan, D. M. Kalyon, and H. Wang, “Shell-core bi-layered scaffolds for engineering of vascularized osteon-like structures”, Biomaterials, 34, 33, 8203-8312 (2013). DOI: 10.1016/j.biomaterials.2013.07.035. 29. S. Senturk-Ozer, H. Gevgilili, C. Erisken, D. Ward and D. M. Kalyon, “Nanofibrous meshes by advanced electrospinning”, SPE Plastics Research Online, 10.2417/spepro.004685 (2013). 30. N. Boz, N. Degirmenbasi and D. M. Kalyon, “Transesterification of canola oil to biodiesel using calcium bentonite functionalized with K compounds, Appl. Catal. B: Environ., 138-139, 236-242 (2013). DOI 10.1016/j.apcatb.2013.02.043. 31. H. T. Kahraman, H. Gevgilili, E. Pehlivan and D. M. Kalyon, “Nanoclay dispersion into a thermosetting binder employing ultrasonication and intensive mixing methods”, J. Applied Polymer Science, 129, 4, 1773-1783 (2013). DOI: 10.1002/app.38867. 32. S. Senturk-Ozer, D. Ward, H. Gevgilili and D. Kalyon, “Dynamics of electrospinning of poly(caprolactone) via hybrid twin screw extrusion and electrospinning and properties of electrospun fibers”, Polymer Engineering and Science, 53, 7, 1463-1474 (2013). DOI 10.1002/pen.23389. 33. D. M. Kalyon, X. Yu, H. Wang, A. Valdevit and A. Ritter, “Twin screw extrusion based technologies offer novelty, versatility, reproducibility and industrial scalability for fabrication of tissue engineering scaffolds”, J. Tissue Sci. Eng., 4, 2, e126 (2013). DOI:10.4172/2157-7552.1000e126. 34. K. B. Shepard, H. Gevgilili, D. M. Kalyon, F. T. Fisher, M. Ocampo, and J. Li, “Viscoelastic behavior of poly(ether imide) incorporated with multi-walled carbon nanotubes”, Journal of Polymer Science Part B: Polymer Physics, 50, 1504–1514 (2012). DOI 10.1002/polb.23151 35. D. Kalyon and M. Malik, “Axial laminar flow of viscoplastic fluids in a concentric annulus subject to wall slip”, Rheologica Acta, 51, 805–820 (2012). DOI 10.1007/s00397-012-0641-y.

4

36. A. Ergun, X. Yu, A. Valdevit, A. Ritter and D. M. Kalyon, “Radially and axially-graded multi-zonal scaffolds targeting critical-sized bone defects from polycaprolactone/hydroxyapatite/tricalcium phosphate”, Tissue Engineering Part A, 18, 23/24, 2426-2436 (2012). doi:10.1089/ten.tea.2011.0625 37. S. F. Bartolucci, G. Mago, F. T. Fisher, E. Troiano, D. M. Kalyon, “Unusual fracture surface morphology of fatigued carbon nanofiber/poly(ether ether ketone) composites”, Carbon, 502347–2374 (2012). 38. A. Ergun, R. Chung, D. Ward, A. Valdevit, A. Ritter, D. M. Kalyon, “Unitary bioresorbable cage/core bone graft substitutes for spinal arthrodesis coextruded from polycaprolactone biocomposites”, Annals of Biomedical Engineering, 40, 5, 1073-1087 (2012). DOI: 10.1007/s10439-011-0484-1. 39. D. Kalyon, “Chemical engineering approaches to the design and fabrication of extrusion-based functionally graded scaffolds targeting tissue engineering applications”, Proceedings of AICHE National Meeting, Pittsburgh, October 30, 2012. 40. D. Kalyon, H. Gevgilili and H. Tang, “Squeeze flow rheometry”, Proceedings of AICHE National Meeting, Pittsburgh, October 31, 2012. 41. A. Ergun, X. Yu, A. Valdevit, A. Ritter and D. M. Kalyon, “In vitro analysis and mechanical properties of twin screw extruded single-layered and co-extruded multi-layered poly(caprolactone) scaffolds seeded with human fetal osteoblasts for bone tissue engineering”, J. Biomedical Materials Research Part A, 999A,1-13 (2011). doi: 10.1002/jbm.a.33190. 42. G. Mago, D. Kalyon and F. Fisher, “Nanocomposites of polyamide-11 and carbon nanostructures: Development of microstructure and ultimate properties following solution processing”, Journal of Polymer Science Part B: Polymer Physics, 49, 1311-1321 (2011). doi: 10.1002/polb.22311. 43. S. Senturk-Ozer, H. Gevgilili and D. Kalyon, “Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing”, Bioresource Technology, 102, 9068-9075 (2011). doi:10.1016/j.biortech.2011.07.018. 44. H. Gevgilili, D. Kalyon, E. Birinci, M. Malik, L. Goovaerts, R. Bacon and P. Mort, “Dynamic assembly of anionic surfactant into highly-ordered vesicles”, Journal of Colloids and Interface Science, 356, 579-588 (2011). doi:10.1016/j.jcis.2011.01.011. 45. A. Ergun, D. Kalyon, A. Valdevit, A. Ritter , X. Yu, “Twin screw extrusion and co-extrusion based fabrication of uniform and multilayered scaffolds for bone tissue engineering”, Orthopaedic Research Society, Transactions Vol. 36, 0285 (2011). 46. A. Ergun, D. Kalyon, A. Valdevit and A. Ritter, “Compressive fatigue behavior of osteoblast seeded tissue constructs of poly(caprolactone) multilayered scaffolds for bone graft substitute applications”, Orthopaedic Research Society, Transactions Vol. 36, 1850 (2011). 47. C. Erisken, D. Kalyon, C. Ornek, H. Wang and J. Xu, “Osteochondral tissue formation through adipose-derived stem cell differentiation using biomimetic tissue scaffolds with graded stimulator

5

concentrations", Tissue Engineering: Part A, 17, Numbers 9 and 10, 1239-1252 (2011). doi:10.1089/ten.TEA.2009.0693. 48. S. Ozkan, D. Kalyon and X. Yu, "Functionally graded β-TCP/PCL nanocomposite scaffolds for bone tissue engineering: In vitro evaluation with human fetal osteoblast cells", Journal of Biomedical Materials Research A, 92, 3, 1007-1018 (2010). doi: 10.1002/jbm.a.32425. 49. C. Erisken, D. Kalyon and H. Wang, “Viscoelastic and biomechanical properties of tissue engineered constructs for osteochondral tissue regeneration”, J. Biomechanical Engineering, 132, 091013-9 (2010). doi:10.1115/1.4001884 50. S. Vural, K. Dikovics and D. Kalyon, “Crosslink Density, Viscoelasticity and Swelling of Hydrogels as affected by Dispersion of Multi-walled Carbon Nanotubes”, Soft Matter, 6, 3870-3875 (2010) doi: 10.1039/c0sm00099j. 51. D. Kalyon, “An Analytical Model for Steady Coextrusion of Viscoplastic Fluids in Thin Slit Dies With Wall Slip”, Polymer Engineering and Science, 50, 4, 652-664 (2010) doi: 10.1002/pen.21580. 52. G. Mago, D. Kalyon and F. T. Fisher, “Processing induced crystallization of semicrystalline polymer nanocomposites”, Proceedings of Society for the Advancement of Material and Process Engineering, SAMPE 2010, May 17-20, Seattle, WA (2010). 53. S. H. Modi, K. B. Dikovics, H. Gevgilili, G. Mago, S. Bartolucci, F. T. Fisher and D. M. Kalyon, “Effects of carbon nanofibers on the thermo-oxidative degradation of poly(ether ether ketone)”, Polymer, 51, 5236-5244 (2010). doi: 10.1016/j.polymer.2010.08.060. 54. G. Mago, D. M. Kalyon, S. C. Jana, and F. T. Fisher, “Polymer Nanocomposite Processing, Characterization and Applications”, Journal of Nanomaterials, Article ID 325807 (2010). 55. N. Degirmenbasi, S. Ozkan, D. Kalyon and X. Yu, “Surface patterning of poly (L-lactide) upon melt processing: in vitro culturing of fibroblasts and osteoblasts on surfaces ranging from highly crystalline with spherulitic protrusions to amorphous with nanoscale indentations”, Journal of Biomedical Materials Research A, 88A (1), 94-104 (2009). DOI: 10.1002/jbm.a.31874 56. S. Ozkan, D. M. Kalyon, X. Yu, C. McKelvey and M. Lowinger, “Multifunctional protein-encapsulated polycaprolactone scaffolds: Fabrication and in vitro assessment for tissue engineering”, Biomaterials, 30, 4336-4347 (2009). doi:10:1016/j.biomaterials.2009.04.050 57. N. Boz, N. Degirmenbasi and D. Kalyon, “Conversion of Biomass to fuel: Transesterification of vegetable oil to biodiesel using KF loaded nano-�-Al2O3 as catalyst”, Applied Catalysis B: Environmental, 89, 590-596 (2009). 58. G. Mago, F. T. Fisher and D. Kalyon, “Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites”, Journal of Nanoscience and Nanotechnology, 9, 5, 3330-3340 (2009).

6

59. G. Mago, F. T. Fisher and D. Kalyon, “Polymer crystallization and precipitation-induced wrapping of carbon nanofibers with PBT”, Journal of Applied Polymer Science, 114, 1312-1319 (2009). 60. D. H. Moon, M. Wazne, A. Koutsospyros, C. Christoudoulatos, H. Gevgilili, M. Malik and D. M. Kalyon, "Evaluation of the treatment of chromite ore processing residue by ferrous sulfate and asphalt emulsion", Journal of Hazardous Materials, 166, 27-32 (2009). 61. S. F. Bartolucci, G. Mago, H. Gevgilili, S. Vural, K. Dikovics, D. M. Kalyon and F. Fisher, “Investigation of the PEEK-Nanotube Composites Prepared by Solution Methods”, Proceedings of IMECE2009 ASME International Mechanical Engineering Congress, Paper no. IMECE2009-11938, Volume 12: Micro and Nano Systems, Parts A and B, 279-282, (2009). doi:10.1115/IMECE2009-11938. 62. H. S. Tang and D. M. Kalyon, "Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities", Journal of Rheology, 52, 5, 1069-1090 (2008). doi.org/10.1122/1.2955508. 63. C. Erisken, D. M. Kalyon and H. Wang, “Functionally and continuously graded electrospun polycaprolactone and �-tricalcium phosphate nanocomposites for interface tissue engineering applications”, Biomaterials 29, 4065-4073 (2008) - doi:10.1016/j.biomaterials.2008.06.022 64. G. Mago, F. T. Fisher and D. M. Kalyon, “Effects of multiwalled carbon nanotubes on the shear-induced crystallization behavior of poly (butylene terephthalate)”, Macromolecules, 41 (21), 8103–8113 (2008). DOI: 10.1021/ma8008838. 65. C. Erisken, D. Kalyon and H. Wang, “A hybrid twin screw extrusion/electrospinning method to process nanoparticle-incorporated electrospun nanofibers”, Nanotechnology, 19, 165302 (2008). doi:10.1088/0957-4484/19/16/165302. 66. G. Mago, D. M. Kalyon and F. T. Fisher, “Membranes of Polyvinylidene fluoride (PVDF) and PVDF Nanocomposites with Carbon Nanotubes via Immersion Precipitation", Journal of Nanomaterials (special issue on Nanomechanics and Nanostructured Multifunctional Materials), 3, 759825 (2008). 67. H. Gevgilili, D. Kalyon and A. Shah, “Processing of energetics in continuous shear roll mills”, Journal of Energetic Materials, 26, 29-51 (2008). 68. H. S. Tang and D. M. Kalyon, “Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip”, J. Rheology, 52, 2, 507-526 (2008). doi.org/10.1122/1.2837104. 69. G. Mago, C. Velasco-Santos, A. L. Martinez-Hernandez, D. M. Kalyon and F. F. Fisher, “Effect of functionalization on the crystallization behavior of MWNT-PBT nanocomposites”, Material Research Society Symp. Proc. Vol. 1056, 1056-HH11-35 (2008). 70. G. Mago, D. M. Kalyon and F. F. Fisher, “Crystallization and morphology of carbon nanofibers-Nylon 11 nanocomposites”, Polymeric Materials: Science and Engineering, 99, 508 (2008).

7

71. D. M. Kalyon and H. Tang, “Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip”, Journal of Non-Newtonian Fluid Mechanics, 143, 133-140 (2007). 72. S. Ozkan, H. Gevgilili, D.M. Kalyon, J. Kowalczyk, and Mark Mezger, “Twin screw extrusion of nano-alumina based simulants of energetic formulations involving gel based binders”, Journal of Energetic Materials, 25, 3, 173-201 (2007). 73. E. Demirkol and D. M. Kalyon, “Batch and continuous processing of polymer layered organoclay nanocomposites”, Journal of Applied Polymer Science, 104, 1391-1398 (2007). 74. D. M. Kalyon and M. Malik, “An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders”, International Polymer Processing, 22, 293-302 (2007). 75. M. Allende, D. Fair, D. M. Kalyon, D. Chiu and S. Moy, “Development of particle concentration distributions and burn rate gradients upon shear-induced particle migration during processing of energetic suspensions”, Journal of Energetic Materials, 25, 49- 67 (2007). 76. J. E. Kowalczyk, M. Malik, D. M. Kalyon, H. Gevgilili, D. F. Fair, M. Mezger and M. Fair, “Safety in Design and Manufacturing of Extruders used for the Continuous Processing of Energetic Formulations”, Journal of Energetic Materials, 25, 247-271 (2007). 77. G. Mago, J. A. Dutreuil, F.T. Fisher, and D.M. Kalyon “Structural formation in poly (butylene terephthalate) and PBT nanocomposites during uniaxial deformation”, Proceedings of the ASME International Mechanical Engineering Conference and Exposition (IMECE), November 11-15, Seattle, WA (2007). 78. D. M. Kalyon, D. Dalwadi, M. Erol, E. Birinci and C. Tsenoglou, “Rheological Behavior of Concentrated Suspensions as affected by the Dynamics of the Mixing Process”, Rheologica Acta, 45, 641-658 (2006). 79. N. Degirmenbasi, D. M. Kalyon and E. Birinci, “Biocomposites of Nanohydroxyapatite with Collagen and Poly(vinyl alcohol)”, Colloids and Surfaces B Biointerfaces, 48, 42- 49 (2006). 80. E. Birinci and D. M. Kalyon, “Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles”, J. Rheology, 50, 3, 313-326 (2006). 81. Z. Peralta-Inga, N. Degirmenbasi, U. Olgun, H. Gocmez and D. M. Kalyon, “Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part I, Mathematical Modeling using Molecular Dynamics Method”, Journal of Energetic Materials, 24, 69-101 (2006). 82. N. Degirmenbasi, Z. Peralta-Inga, U. Olgun, H. Gocmez and D. M. Kalyon, “Recrystallization of CL-20 and HNFX from Solution for rigorous Control of the Polymorph type: Part II, Experimental Studies”, Journal of Energetic Materials, 24, 103- 139 (2006).

8

83. R. Schefflan, S. Kovenklioglu, D. Kalyon, M. Mezger and M. Leng, “Formation of aluminum nanoparticles upon condensation from vapor phase for energetic applications”, Journal of Energetic Materials, 24, 141- 156 (2006). 84. C. Feger, M. McGlashan-Powell, I. Nnebe, and D. M. Kalyon, “Rheology and stability of highly filled thermal pastes”, Proceedings of the International Microelectronics and Packaging Society, Scottsdale, Arizona, March 23 (2006). 85. R. Schefflan, S. Kovenklioglu, D. Kalyon, P. Redner and E. Heider, “Mathematical model for a fed-batch process for energetic crystals to achieve targeted size distributions”, Journal of Energetic Materials, 24, 157- 172 (2006). 86. D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy, “Use of adjustable-gap on-line and off-line slit rheometers for the characterization of the wall slip and shear viscosity behavior of energetic formulations”, Journal of Energetic Materials, 24, 175-193 (2006). 87. G. Mago, F.T. Fisher, and D.M. Kalyon, "Effect of shearing on the crystallization behavior of poly(butylene terephthalate) and PBT nanocomposites", Proceedings of ASME International Mechanical Engineering Conference and Exposition (IMECE), IMECE 2006-14585, November 5-10, Chicago, IL (2006). 88. D. Kalyon, H. Tang and B. Karuv, “Squeeze flow rheometry for rheological characterization of energetic formulations”, Journal of Energetic Materials, 24, 195-202 (2006). 89. D. Kalyon, “An overview of the rheological behavior and characterization of energetic formulations: Ramifications on safety and product quality”, Journal of Energetic Materials, 24, 213-245 (2006). 90. E. Birinci, H. Gevgilili, D. Kalyon, B. Greenberg, D. Fair and A. Perich, “Rheological characterization of nitrocellulose gels”, Journal of Energetic Materials, 24, 247-269 (2006). 91. D. Kalyon, “Letter to the Editor: Comments on the use of rheometers with rough surfaces or surfaces with protrusions”, J. Rheology, 49, 5, 1153-1155 (2005). 92. D. Kalyon, “Apparent Slip and Viscoplasticity of Concentrated Suspensions”, J. Rheology, 49, 3, 621-640 (2005). doi.org/10.1122/1.1879043. 93. R. Yazici and D. Kalyon, “Microstrain and defect analysis of CL-20 crystals by novel x-ray methods”, Journal of Energetic Materials, 23, 43-58 (2005). 94. M. Erol and D. Kalyon, “Assessment of the Degree of Mixedness of Filled Polymers: Effects of Processing Histories in Batch Mixer and Co-Rotating and Counter-rotating Twin Screw Extruders”, International Polymer Processing, 20, 228-237 (2005). 95. M. Malik and D. Kalyon, “Three-dimensional Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential Twin Screw Extruder and Die Combination”, Int. Polym. Processing, 20, 398- 409 (2005).

9

96. U. Olgun and D. Kalyon, “Use of Molecular Dynamics to investigate polymer melt-metal wall interactions” Polymer, 46, 9423-9433 (2005). 97. C. Feger, J. D. Gelorme, M. McGlashan-Powell and D. Kalyon, “Mixing, Rheology and Stability of Highly Filled Thermal Pastes”, IBM Journal of Research and Development, 49, 4/5, 699-707 (2005). 98. D. Kalyon, H. Gevgilili and A. Shah, “Detachment of the polymer melt from the roll surface: data from a shear roll extruder”, International Polymer Processing, 19, 2, 129-138 (2004). 99. H. Tang and D. Kalyon, “Estimation of the Parameters of Herschel-Bulkley Fluid under Wall Slip Using a Combination of Capillary and Squeeze Flow Viscometers”, Rheologica Acta, 43, 1 80-88 (2004). 100. D. Kalyon, H. Gevgilili, R. Yazici, A. Post and G. McFann, “Flow and structure development behavior of bar soaps containing synthetic detergent”, Rheologica Acta, 43, 396-405 (2004). 101. G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, “Rheology and processing of BaSO4 filled medical-grade thermoplastic polyurethane”, Polymer Engineering and Science, 44, 10, 1941-1948 (2004). 102. D. Kalyon, S. Prickett, R. Muscato, W. Newton and S. Murphy, “Processing of fast and Slow Burn Propellants using Co-extrusion Technologies”, Proceedings of Joint Army, Navy, NASA and Air Force, Propellant Characterization Subcommittee Meeting (JANNAF), Chemical Propulsion Information Agency Publication May (2004). 103. Kristin L. Jasinkiewicz, Timothy E. Dawag, Michael Fair, Roderick King, Dilhan Kalyon, Elvan Birinci and Halil Gevgilili, “Continuous Processing of Black Powder”, Proceedings of AICHE Annual Meeting, Austin, Texas (2004). 104. Suzanne Prickett, William Newton, Stuart Richman, Wayne Thomas, Christopher Gonzalez, Dilhan M. Kalyon, Halil Gevgilili, Moinuddin Malik Tugrulbey Kiryaman and James E. Kowalczyk, "Twin screw extrusion processing of double base rocket propellant", Proceedings of AICHE Annual Meeting, Austin, Texas (2004). 105. Dilhan M. Kalyon, "Rheological characterization platforms for the extrudability and safety analysis of energetic materials ", Proceedings of AICHE Annual Meeting, Austin, Texas (2004). 106. H. S. Tang and D. M. Kalyon. “Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles”, Proceedings of AICHE Annual Meeting, Austin, Texas (2004). 107. James E. Kowalczyk, James B. Graybill, Moinuddin Malik, Dilhan Kalyon, Halil Gevgilili, Mark Mezger and Brett Reddingius “Novel Extrusion Platforms for the Continuous Processing of Energetics”, Proceedings of AICHE Annual Meeting, Austin, Texas (2004). 108. M. Malik, T. Kiryaman and D. Kalyon, “Mathematical modeling of the twin screw extrusion processing of energetic materials using tangential versus fully -intermeshing extruders”, Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting (2004).

10

109. D. Kalyon, D. Dalwadi, M. Erol, B. Greenberg and E. Birinci, “Rheological behavior of concentrated suspensions as affected by the degree of mixedness of their ingredients”, Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting (2004). 110. J. Kowalczyk, J. Graybill, B. Karuv, D. Kalyon, H. Gevgilili, M. Zghaibeh, S. Ozkan, M. Mezger and B. Reddingius, “Design and manufacture of the smallest twin screw extruder in the World for the processing of nanoparticles into nanoenergetics and nanocomposites”, Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting (2004). 111. D. Kalyon, H. Tang, E. Birinci and H. Gevgilili”, Predictions of the onset of the flow instabilities and gross surface irregularities of energetic grains during extrusion”, Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting (2004). 112. D. Kalyon, H. Gevgilili, E. Birinci, H. Tang, J. Kowalczyk and B. Karuv, “Novel rheological characterization platforms for the extrudability and safety analysis of energetic materials”, Proceedings of the 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting (2004). 113. D. Kalyon, “Letter to the Editor: Comments on “A new method of processing capillary viscometry data in the presence of wall slip” [J. Rheol. 47, 337-348 (2003)]”, J. Rheology, 47, 4, 1087-1088 (2003). 114. B. L. Greenberg, D. M. Kalyon, M. Erol, M. Mezger, K. Lee and S. Lusk, “Analysis of Slurry-Coating Effectiveness of CL-20 using a Novel Grazing Incidence X-ray Diffraction Method ”, Journal of Energetic Materials, 21, 1, 185 (2003). 115. D. Kalyon and H. Gevgilili, “Wall slip and extrudate distortion of three polymer melts”, J. Rheology, 47, 3, 683-699 (2003). 116. D. Kalyon, G. Lu, I. Yilgor and E. Yilgor, “Rheology and Extrusion of Medical-grade Thermoplastic Polyurethane”, Polymer and Engineering Science, 43, 12, 1863-1877 (2003). 117. A. Wagner, D. Kalyon, R. Yazici, and T. Fiske, “Uniaxial Extensional Flow Behavior of a Glass Fiber-Filled Engineering Plastic”, Journal of Reinforced Plastics and Composites”, 22, 4, 327-337 (2003). 118. G. Lu, D.M. Kalyon, I. Yilgor and E. Yilgor, "Coextrusion of TPU and BaSO4 filled Medical-Grade TPU”, Society of Plastics Engineers ANTEC Technical Papers, Volume 49 (2003). 119. G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, “Extrusion of BaSO4 filled medical-grade thermoplastic polyurethane”, Society of Plastics Engineers ANTEC Technical Papers, Volume 49 (2003). 120. D. Kalyon, “Twin screw extrusion of solid rocket fuels and propellants”, Proceedings of Annual Meeting of American Institute of Chemical Engineers Annual Meeting, (2003).

11

121. D. Kalyon, E. Birinci and H. Gevgilili, “Development of extrudate distortions as affected by wall slip behavior of polymers and filled polymers”, Proceedings of Annual Meeting of American Institute of Chemical Engineers Annual Meeting, (2003). 122. B. Greenberg, D. Kalyon, M. Erol, M. Mezger, P. Redner, K. Lee and S. Lusk, “Structural analysis of slurry coated CL-20 (PAX 12 granules) using a novel grazing incidence x-ray diffraction method”, Proceedings of Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26 (2003). 123. S. E. Prickett, C Murphy, W. Thomas and D. Kalyon, “Shear viscosity, extrudate swell and wall slip behavior of a double base propellant”, Proceedings of Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26 (2003). 124. D. Kalyon, E. Birinci, R. Yazici, B. Karuv, and S. Walsh, “Electrical Properties of Composites as Affected by the Degree of Mixedness of the Conductive Filler in the Polymer Matrix”, Polym. Eng. Sci., 42, 7, 1609-1617 (2002). 125. D.M. Kalyon and H. Gevgilili, "Effect of Wall Slip of Polymer Melts on their Relaxation Modulus Behavior", Society of Plastics Engineers ANTEC Technical Papers, Vol. 48 (2002). 126. H. Gevgilili and D.M. Kalyon, "Catastrophic Failure of the No-slip Condition at the Wall during Torsional Flows and Development of Gross Surface Irregularities during Capillary flow of three Polymers", Society of Plastics Engineers ANTEC Technical Papers, Vol. 48 (2002). 127. D.M. Kalyon and E. Birinci, "Electrical Conductivity of a Graphite based Composite as affected by the degree of mixedness of Graphite in the Elastomeric Matrix", Society of Plastics Engineers ANTEC Technical Papers, Vol. 48 (2002). 128. H. Gevgilili and D.M. Kalyon, “Step Strain Flow: Wall Slip and other Error Sources”, J. Rheology, 45, 2, 467-475 (2001). 129. Dilhan M. Kalyon, “Rheological Behavior of Concentrated Suspensions”, Proceedings of Polymer Processing Society Regional Meeting, Pages 51-52, Antalya, Turkey, October 22, 2001 130. Dilhan M. Kalyon, “Extrusion of Highly Filled Materials: Rheology, Structure Development, Mathematical Modeling and Experimental Studies, Polymer Processing Society Regional Meeting, Pages 199-200, Antalya, Turkey, October 22, 2001. 131. Dilhan M. Kalyon, “New Developments in Rheological Characterization of Energetic Materials”, Proceedings of the 2001 Continuous Mixer and Extruder Users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001. 132. Dilhan M. Kalyon, “Continuous Processing of Energetic Materials”, Proceedings of the 2001 Continuous Mixer and Extruder Users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001.

133. M. Mezger, S. Nicolich, R. Yazici, D. Kalyon, “Characterization of coating for energetic material”, Proceedings of the International Annual Conference at Frauhofer Institute für Chemiche

12

Technologie, Volume 32-34, Berghausen: Fraunhofer-Institute für Chemiche Technologie, Germany (2001). 134. A. Lawal, S. Railkar and D. Kalyon, “Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip”, Journal of Reinforced Plastics and Composites, 19, 18, 1483-1492 (2000). 135. M. Allende and D. Kalyon, “Assessment of Particle-Migration Effects in Pressure-Driven Viscometric Flows”, J. Rheology, 44, 1, 79-90 (2000). 136. A. Lawal and D. M. Kalyon, “Compressive Squeeze Flow of Viscoplastic Fluids with Apparent Wall Slip”, International Polymer Processing, 15, 1, 63-71 (2000). 137. D. M. Kalyon, A. Lawal, R. Yazici, P. Yaras and S. Railkar, "Mathematical Modeling and Experimental Studies of Twin Screw Extrusion of Filled Polymers", Polym. Eng. Sci., 39, 6, 1139-1151 (1999). 138. A. Lawal and D. M. Kalyon, “Analysis of Nonisothermal Screw Extrusion Processing of Viscoplastic Fluids with Significant Backflow”, Chem. Eng. Sci., 54, 999-1013 (1999). 139. E. Birinci, R. Yazici, D. M. Kalyon, M. Michienzi, C. Murphy and R. Muscato, “Statistics of Mixing Distributions in Filled Elastomers Processed by Twin Screw Extrusion”, SPE ANTEC Technical Papers, 45, 1720-1725 (1999). 140. R. Yazici, B. Karuv, E. Birinci, and D. M. Kalyon, “Particulate based Conductive Composites Exploiting Percolation-Range Microstructure”, SPE ANTEC Technical Papers, 45, 1551-1555 (1999). 141. M. Rege, S. Kovenklioglu, R. Yazici, D. M. Kalyon, and E. Birinci, “Elastomeric Coating of Filler Powders by Slurry Precipitation”, SPE ANTEC Technical Papers, 45, 3489-3494 (1999). 142. M. Allende and D. Kalyon, “Assessment of Particle Migration Effects in Capillary Rheometry of Filled Polymers”, SPE ANTEC Technical Papers, 45, 1130-1137 (1999). 143. A. Lawal and D. Kalyon, “Squeeze Flow Rheometer”, SPE ANTEC Technical Papers, 45, 1120-1125 (1999). 144. E. Kucukpinar, D. Kalyon and P. Tong, “Viscoelasticity of Polyethylenes Produced with Single Site Metallocene Catalysis”, SPE ANTEC Technical Papers, 45, 1195-1200 (1999). 145. A. Lawal, S. Railkar and D. Kalyon, “3-D Analysis of Fully-Flighted Screws of Co-Rotating Twin Screw Extruders”, SPE ANTEC Technical Papers, 45, 317-322 (1999). 146. A. Lawal, S. Railkar and D. Kalyon, “Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip”, SPE ANTEC Technical Papers, 45, 68-73 (1999). 147. D. M. Kalyon, S. Railkar and A. Lawal, “New techniques for the Simulation of the Die and Twin Screw Extrusion Processing of Energetic Materials”, Proceedings of the 10th Joint Ordnance

13

Commander’s Group, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Brigham City, Utah, May 10-12, 1999, pages 14-39. 148. J. E. Kowalczyk and D. M. Kalyon, “Simulation Based Design and Manufacture of Screws and Dies for the Energetics Industry”, Proceedings of the 10th Joint Ordnance Commander’s Group, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Brigham City, Utah, May 10-12, pages 40-60 (1999). 149. R. Yazici and D. M. Kalyon, “On-Line and Off-line Analysis of the Extruded and Cast Energetic Materials for Microstructural Distributions”, Proceedings of the 10th Joint Ordnance Commander’s Group, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Brigham City, Utah, May 10-12, pages 61-69 (1999). 150. M. Gallant, W. Newton, S. Johnson, S. Prickett, D. M. Kalyon, A. Lawal and S. Railkar, “Twin Screw Processing of GEM Gun Propellant”, Proceedings of the 10th Joint Ordnance Commander’s Group, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Brigham City, Utah, May 10-12, pages 88-96(1999). 151. D. M. Kalyon, B. Karuv and J. Garrow, “New Squeeze Flow Rheometer for the Rheological Characterization of Energetic Materials”, Proceedings of the 10th Joint Ordnance Commander’s Group, Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Brigham City, Utah, May 10-12, pages 97-110 (1999). 152. A. Lawal and D. M. Kalyon, “Squeezing Flow of Viscoplastic Fluids Subject to Wall Slip”, Poly. Eng. and Science, 38, 11, 1793-1804 (1998). 153. D. M. Kalyon, “Use of Simulation in Design and Optimization of Continuous Processing of Energetic Materials”, Proceedings of TACOM/TARDEC Conference at SIT, Hoboken, NJ (1998). 154. M. Akbulut, W. C. Ermler and D. M. Kalyon, "Ab Initio Cluster Model Study of Polymer-Metal Interactions," Computational and Theoretical Polymer Science, 7, 2, 75-80 (1998). 155. Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Experimental Investigation and Modeling of Dissolution of Polymers and Filled Polymers", Polymer Engineering and Science, 31, 1, 90-100 (1998). 156. H. Suwardie, R. Yazici, D. M. Kalyon and S. Kovenklioglu, "Capillary Flow Behavior of Microcrystalline Wax and Silicon Carbide Suspension," J. Materials Sci., 33, 5059-5067 (1998). 157. R. Yazici and D. M. Kalyon, “Measurement of Processing Effects on Crystal Defects”, Proceedings of 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998) 158. R. Yazici and D. M. Kalyon, “Quantitative Measurement of Mixing Quality”, Proceedings of 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998).

14

159. S. Kovenklioglu, R. Yazici and D. M. Kalyon, “Environmentally Acceptable Alternative Solvent Systems for CL-20 Processing”, Proceedings of 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998). 160. A. Lawal and D. Kalyon, “ Viscous Heating in Nonisothermal Die Flow of Viscoplastic Fluids with Wall Slip,“ Proceedings of Polymer Processing Society North American Meeting, pages 163-165 (1998). 161. T. Fiske, H. Gokturk and D. M. Kalyon, "Enhancement of the Relative Permeability of Polymeric Composites with Hybrid Particulate Fillers," Journal of Applied Polymer Science, 65, 1371-1377 (1997). 162. D. Kalyon, “Review of Seventh Edition of Perry’s Chemical Engineers’ Handbook”, Chemical Engineering, 104, 12, 12-13 (1997). 163. T. Fiske, H. Gokturk and D. M. Kalyon, "Percolation in Magnetic Composites," Journal of Material Science, 32, 5551-5560 (1997). 164. A. Lawal and D. M. Kalyon, "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip," Chem. Eng. Sci., 52, 8, 1323-1337 (1997). 165. A. Lawal, S. Railkar and D. M. Kalyon, "A new Approach to Simulation of Die Flow which incorporates the Extruder and the Rotating Screw Tips in the Analysis," Int. Polym. Proc., 12, 2, 123-135 (1997). 166. B. Aral and D. M. Kalyon, "Viscoelastic Material Functions of Noncolloidal Suspensions with Spherical Particles," J. Rheology, 41, (3), 599-620 (1997). 167. Z. Cao, S. Kovenklioglu, D. M. Kalyon and R. Yazici, "Dissolution Study of BAMO/AMMO Thermoplastic Elastomers for the Recycling and Recovery of Energetic Materials," J. of Energetic Materials, 15, 73-107 (1997). 168. R. E. Kucukpinar and D. M. Kalyon, "Viscoelasticity and Processability of a BAMO/AMMO Thermoplastic Elastomer," SPE ANTEC Technical Papers, 43, 3411-3417 (1997). 169. T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Relative Magnetic Permeability of Injection Molded Composites as Affected from the Flow Induced Orientation of Ferromagnetic Particles," SPE ANTEC Technical Papers, 43, 1482-1486 (1997). 170. T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Effects of Flow Induced Orientation of Ferromagnetic Particles on Relative Magnetic Permeability of Injection Molded Composites," Polym. Eng. Sci., 37, 826-837 (1997). 171. A.H. Wagner, D. M. Kalyon, R. Yazici and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers," SPE ANTEC Technical Papers, 43, 996-1000 (1997). 172. R. Yazici and D.M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-Angle x-ray Diffraction," SPE ANTEC Technical Papers, 43, 2076-2080 (1997).

15

173. D. M. Kalyon, H. Gokturk and I. Boz "An Adjustable Gap In-Line Rheometer," SPE ANTEC Technical Papers, 43, 2283-2288 (1997). 174. Z. Cao, S. Kovenklioglu, R. Yazici and D. M. Kalyon, "Dissolution Rates of Oxetane Thermoplastic Elastomer for Dissolution Based Recycling of Elastomeric Formulations", SPE ANTEC Technical Papers, 43, 3104-3108 (1997). 175. S. E. Prickett, D. M. Kalyon and S. Railkar, "Characterization of the Temperature-Dependent Shear Viscosity Material Function of AA-6 Propellant," Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, Sunnyvale, California (1997) 176. D. M. Kalyon, S. Railkar, M. Michienzi and C.M. Murphy "Die Design for Twin Screw Extruded Composite Propellant Grain" Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, Sunnyvale, California (1997). 177. M.A. Michienzi, C.M. Murphy, D. M. Kalyon and S. Railkar, Wall Slip and Capillary Flow Behavior of Extrudable Composite Propellant, Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, Sunnyvale, California (1997). 178. D. M. Kalyon, S. Railkar, S.E. Prickett, M.A. Michienzi, C.M. Murphy and F. M. Gallant, " Capillary and On-Line Slit Rheometry of an HE LOVA Gun Propellant Formulation," Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, Sunnyvale, California (1997). 179. D. Kalyon, S. Railkar, H. Gokturk, I. Boz, N. Boz and R. Guy, " Twin Screw Extrusion Processing of Extrudable Composite Propellant Simulant ," Proceedings of JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, Sunnyvale, California (1997). 180. A. Lawal and D. M. Kalyon, "Non-Isothermal Extrusion Flow of Viscoplastic Fluids with Wall Slip", International Journal of Heat and Mass Transfer, 40 (16), 3883-3897 (1997). 181. R. Yazici and D. M. Kalyon, "Quantitative Characterization of Degree of Mixedness of LOVA Grains," Journal of Energetic Materials, 14 (1), 57-73(1996). 182. A. Wagner and D. M. Kalyon, "Parison Formation and Inflation of Polyamides in Blow Molding", Society of Plastics Engineers ANTEC Technical Papers, 42, 953-957(1996). 183. T. Fiske, H. Gokturk and D. M. Kalyon, "Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers," Society of Plastics Engineers ANTEC Technical Papers, 42, 1768-1772(1996). 184. T. Fiske, A. Wagner, R. Yazici and D. M. Kalyon, "Uniaxial Extensional Flow Behavior of Fiber Filled Suspensions as Affected by Fiber Aspect Ratio and Concentration," Society of Plastics Engineers ANTEC Technical Papers, 42, 1134-1138(1996). 185. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Twin Screw Extrusion Processing of Filled Polymers," Society of Plastics Engineers ANTEC Technical Papers, 42, 381-385 (1996).

16

186. Lawal, S. Railkar and D. M. Kalyon, "Coupled Simulation of Die and Extrusion Flows Using Three-Dimensional Finite Element Method," Society of Plastics Engineers ANTEC Technical Papers, 42, 155-159(1996). 187. A. Wagner, D. M. Kalyon and V. Tan, "Microstructural Distributions in Extrusion Blow Molded Semicrystalline Resins," Society of Plastics Engineers ANTEC Technical Papers, 42 (selected as the best paper of Blow Molding Division), 2195-2199(1996). 188. A. Wagner and D. M. Kalyon, "Parison Formation and Inflation Behavior of Polyamide Resins in Extrusion Blow Molding," Polym. Eng. Sci., 36,(14), 1897-1906(1996). 189. A. Wagner, R. Yazici and D.M. Kalyon, "Extrudate Swell Behavior of a Fiber Filled Suspension," Polymer Composites, 17 (6), 840-849 (1996). 190. A. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Pressurization and Heat Transfer During Twin Screw Extrusion Processing of Concentrated Suspensions," Journal of Materials Processing and Manufacturing Science, 5, 57-78 (1996). 191. M. Michienzi, C. Murphy and D. M. Kalyon, "Using Instrumented Capillary Dies to Characterize the Rheology of Extruded Composite Propellant," Proceedings of JANNAF Conference, April, (1996). 192. R. Yazici and D. M. Kalyon, " Degree of Mixing Analysis in LOVA Propellants by Wide-Angle x-Ray Diffraction," US Army Report, ARPBM-CR-95001, 33 pages, April, (1996) 193. Z. Cao, S. Kovenklioglu, D. Kalyon and R. Yazici, “Polymer Dissolution Experiment for Chemical Engineering Laboratory”, ASEE Annual Conference Proceedings, 1, 1134-1138 (1996). 194. A. Lawal and D. M. Kalyon, "Mechanisms of Mixing in Single and Co-rotating Twin Screw Extruders," Polym. Eng. Sci., 35 (17) 1325-1338 (1995). 195. A. Lawal and D. M. Kalyon, "Simulation of the Intensity of Segregation Distributions Using Three-Dimensional FEM Analyses: Applications to Co-rotating Twin Screw Extruders," Journal of Applied Polymer Science, 58, 1501-1507 (1995). 196. B. Aral and D. M. Kalyon, "Rheology and Extrudability of Very Concentrated Suspensions: Effects of Vacuum Imposition," Plast. and Rubber Comp. Proc. and Applications, 24, 201-210 (1995). 197. D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Motion Analysis of Development of Wall Slip during Die Flow of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Papers, 41, 1130-1134 (1995). 198. D. M. Kalyon, "Highly Filled Materials: Understanding the Generic Behavior of Highly Filled Materials Leads to Manufacturing Gains and New Technologies," Chem Tech, 25 (5), 22-30 (1995). 199. D. M. Kalyon, "A Report on Highly Filled Materials and the Activities of the Highly Filled Materials Institute at Stevens," Bulletin of the British Society of Rheology, 38 (1), 12 (1995).

17

200. D. M. Kalyon and S. Kovenklioglu, "Concomitant Neutralization, Gelation and Encapsulation of Chemical Munitions," Proceedings of the Symposium on Alternatives to Incineration for Disposal of Chemical Munitions and Energetics, Stevens Institute of Technology, Hoboken, NJ, June 5-6, 1995. 201. D.M. Kalyon and S. Kovenklioglu, "Disposal of Chemical Munitions Using Concomitant Neutralization, Gelation and Encapsulation," Journal of Energetic Materials, 13 (3-4), 165-183 (1995). 202. D. M. Kalyon, Y. N. Chiou, S. Kovenklioglu and A. Bouaffar, "High Pressure Polymerization of Ethylene and Properties of Polyethylene Product," Polymer Engineering and Science, 34 (10), 804-814 (1994). 203. P. Yaras, D. M. Kalyon, and U. Yilmazer, "Flow Instabilities in Capillary Flow of Concentrated Suspensions," Rheologica Acta, 33, 48-59 (1994). 204. A. Lawal and D. M. Kalyon, "Non-isothermal Model of Single Screw Extrusion of Generalized Newtonian Fluids," Numerical Heat Transfer, 26 (1), 103-121 (1994). 205. A. Lawal and D. M. Kalyon, "Single Screw Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces," Polym. Eng. Sci., 34, 1471-1479 (1994). 206. B. Aral and D. M. Kalyon, "Effects of Temperature and Surface Roughness on Time-Dependent Development of Wall Slip in Torsional Flow of Concentrated Suspensions," J. Rheol., 38 (4), 957-972 (1994). 207. T. Fiske, S. Railkar and D. M. Kalyon, "Effects of Segregation on the Packing of Spherical and Non-Spherical Particles," Powder Technology, 81, 57-64 (1994). 208. R. Yazici, A. Wagner, D. M. Kalyon and S. B. Han, "Extrudate Swell Behavior of Engineering Plastics Reinforced with Glass Fibers," Society of Plastics Engineers ANTEC Technical Papers, 40, 1172-1174 (1994). 209. A. Lawal, D. M. Kalyon, and Z. Ji, "Computational Study of Chaotic Mixing in Co-Rotating Two-Tipped Kneading Paddles: Two-Dimensional Approach," Polymer Engineering and Science, 33 (3), 140-148 (1993). 210. A. Lawal and D. M. Kalyon, "Three Dimensional Analysis of Co-rotating Twin Screw Extrusion Using Tools of Dynamics," Society of Plastics Engineers ANTEC Technical Papers, 39, 3397-3400 (1993). 211. A. Lawal and D. M. Kalyon, "Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces," Society of Plastics Engineers ANTEC Technical Papers, 39, 2782-2785 (1993). 212. R. Yazici and D. M. Kalyon, "Characterization of Degree of Mixing of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Papers, 39, 2845-2850 (1993).

18

213. B. Aral and D. M. Kalyon, "Time-Dependent Development of Wall Slip in Shear Flows of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Papers, 39, 2607-2610 (1993). 214. H. Gokturk, T. Fiske and D. M. Kalyon, "Dielectric Properties of Polyethylene-Stainless Steel Fiber Composites," Society of Plastics Engineers ANTEC Technical Papers, 39, 605-608 (1993). 215. P. Yaras, U. Yilmazer and D. M. Kalyon, "Unstable Flow of Concentrated Suspensions in Tube Flow," Society of Plastics Engineers ANTEC Technical Papers, 39, 2604-2606 (1993). 216. A. Wagner and D. M. Kalyon, "Extrudate Swell, Rheological Behavior and Parison Formation of Blow Molding Grade Engineering Resins," Society of Plastics Engineers ANTEC Technical Papers, 39, 1878-1884 (1993). 217. T. Fiske, H. Gokturk and D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Ferromagnetic Powders," Society of Plastics Engineers ANTEC Technical Papers, 39, 614-617 (1993). 218. D. Kalyon, P. Yaras, B. Aral and U. Yilmazer, "Rheological Behavior of Concentrated Suspensions: A Solid Rocket Fuel Simulant," J. Rheology, 37, 35-53 (1993). 219. J. S. Sun, H. S. Gokturk and D. M. Kalyon, "Volume and Surface Resistivity of Low Density Polyethylene Filled with Stainless Steel Fibers," Journal of Materials Science, 28, 364-366 (1993). 220. D. M. Kalyon, R. Yazici and A. Lawal, "Techniques to Analyze Goodness of Mixing of Concentrated Suspensions and Simulation of Mixing in Extrusion Flows," Proceedings of 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Livermore, CA, April 28 (1993). 221. D. M. Kalyon, U. Yilmazer, B. Aral and P. Yaras, "Rheological Behavior of Solid Rocket Fuel Simulants," Proceedings of 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Livermore, CA, April 29 (1993). 222. H. Gokturk, T. Fiske and D. M. Kalyon, "Granular Magnetic Composites Employing Cobalt Based Amorphous Alloys in a Polymeric Host," J. Appl. Physics, 73 (10), 5598-5600 (1993). 223. D. M. Kalyon, "Review of Factors Affecting the Continuous Processing and Manufacturability of Highly Filled Suspensions," Journal of Materials Processing and Manufacturing Science, 2 159-187 (1993). 224. A. Lawal, D. M. Kalyon and U. Yilmazer, "Extrusion and Lubrication Flows of Viscoplastic Fluids with Wall Slip," Chem. Eng. Comm., 122, 127 (1993). 225. Y. Chen, D. M. Kalyon and E. Bayramli, "Effects of Surface Roughness and the Chemical Structure of Materials of Construction on Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow," J. Appl. Polym. Sci., 50 (7), 1169-1177 (1993).

19

226. R. Yazici and D. M. Kalyon, "Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray Diffraction," Rubber Chem. and Tech., 66 (4), 527-537 (1993). 227. H. Gokturk, T. Fiske and D. M. Kalyon, "Effects of Particle Shape and Size Distributions on the Electrical and Magnetic Properties of Nickel/Polyethylene Composites," J. Appl. Polym. Sci., 50, 1891-1901 (1993). 228. H. Gokturk, T. Fiske and D. M. Kalyon, "Electric and Magnetic Properties of a Thermoplastic Elastomer Incorporated with Ferromagnetic Powders," IEEE Transactions on Magnetics, 29 (6), 4170-4176 (1993). 229. S. B. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields," J. of Reinforced Plastics and Composites, 12, 1212-1220 (1993). 230. J. S. Yu, A. H. Wagner and D. M. Kalyon, "Simulation of the Microstructure Development in Injection Molding of Engineering Plastics," Journal of Applied Polymer Science, 44, 477-489 (1992). 231. Y. Chen, D. M. Kalyon and E. Bayramli, "Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow: Effects of Materials of Construction and Surface Roughness," Society of Plastics Engineers ANTEC Technical Papers, 38, 1747-1751(1992). 232. B. Aral, D. M. Kalyon and H. Gokturk, "The Effects of Air Incorporation in Concentrated Suspension Rheology," Society of Plastics Engineers ANTEC Technical Papers, 38, 2448-2451(1992). 233. H. Gokturk, T. Fiske, D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Nickel Powders, Fibers, and Flakes," Society of Plastics Engineers ANTEC Technical Papers, 38, 491-494 (1992). 234. S. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields," Society of Plastics Engineers ANTEC Technical Papers, 38, 488-490 (1992). 235. Z. Ji and D. M. Kalyon, "Two Dimensional Computational Study of Chaotic Mixing in Two-tipped Kneading Paddles of Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Papers, 38, 1323-1327 (1992). 236. A. Lawal and D. M. Kalyon, "A Non-isothermal Model of Single Screw Extrusion Processing of Viscoplastic Materials Subject to Wall Slip," Society of Plastics Engineers ANTEC Technical Papers, 38, 2158-2161 (1992). 237. A. Lawal and D. M. Kalyon, "Incorporation of Wall Slip in Non-isothermal Modeling of Single Screw Extrusion Processing," Proceedings of the First International Conference on Transport Phenomena in Processing, S. Guceri, ed., Technomic Public. Co., 985-996 (1992). 238. D. M. Kalyon, "Simulation of Continuous Processing of Highly Filled Suspensions," Proceedings of Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, November 1992.

20

239. D. M. Kalyon, "Rheological Behavior of Highly Filled Suspensions," Proceedings of Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, November 1992. 240. U. Yilmazer and D. M. Kalyon, "The Role of Interface at the Wall in Flow of Concentrated Composites," The Interfacial Interactions in Polymeric Composites, NATO Advanced Study Institute, G. Akovali, ed., Antalya, Turkey, 1992. 241. J. Yu and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part II," Polym. Eng. Sci., 31(3), 153-160 (1991). 242. J. Yu, M. Lim and D. M. Kalyon, "Development of Density Distributions in Injection Molded Amorphous Engineering Plastics, Part I," Polym. Eng. Sci., 31(3), 145-152 (1991). 243. D. Kalyon, H. Suwardie and S. Kovenklioglu, "Thermal Behavior and Curing Kinetics of Poly(carbosilane)," Journal of Applied Polymer Science, 42, 1087-1095(1991). 244. J. S. Yu and D. M. Kalyon, "Microstructure Development in Blow Molded Amorphous Engineering Plastics," Plastics Rubber and Composites Processing and Applications, 15, 95-101(1991). 245. U. Yilmazer and D. M. Kalyon, "Dilatancy of Concentrated Suspensions with Newtonian Matrices," Polymer Composites 12 (4), 226-232 (1991). 246. A. Wagner and D. M. Kalyon, "Development of Cracks in Injection Molded Amorphous Engineering Plastics," Polym. Eng. Sci. 21 (19), 1393-1399 (1991). 247. D. M. Kalyon, C. Jacob and P. Yaras, "An Experimental Study of the Degree of Fill and Melt Densification in Fully-intermeshing, Co-rotating Twin Screw Extruders," Plastics, Rubber and Composites Processing and Applications, 16 (3), 193-200 (1991). 248. D. M. Kalyon, R. Yazici, C. Jacob, B. Aral and S. W. Sinton, "Effects of Air Entrainment on the Rheology of Concentrated Suspensions during Continuous Processing," Polym. Eng. Sci., 31, 1386-1392(1991). 249. D. M. Kalyon and J. Yu, "Microstructure Development in Blow Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Papers, 36, 768-772(1990). 250. Z. Ji, A. Gotsis and D. M. Kalyon, "Single Screw Extrusion Processing of Highly Filled Suspensions Including Wall Slip," Society of Plastics Engineers, ANTEC Technical Papers, 36, 160-163(1990). 251. D. Gotsis, A. Ji and D. M. Kalyon, "3-D Analysis of the Flow in Co-rotating Twin Screw Extruders," Society of Plastics Engineers, ANTEC Technical Papers, 36, 139-142(1990). 252. H. Wagner and D. M. Kalyon, "Formation of Cracks in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers, ANTEC Technical Papers, 36, 1468-1472(1990).

21

253. J. S. Yu, M. Lim and D. M. Kalyon, "Characterization and Simulation of Density Distributions in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers, ANTEC Technical Papers, 36, 313-317(1990). 254. H. Yao, H. Suwardie, D. M. Kalyon and S. Kovenklioglu, "Conversion of Polymeric Precursors into Ceramics," Society of Plastics Engineers, ANTEC Technical Papers, 36, 538-541(1990). 255. J. W. Sinton, J. C. Crowley, G. A. Lo, D. M. Kalyon and C. Jacob, "Nuclear Magnetic Resonance Imaging Studies of Mixing in Twin Screw Extruders," Society of Plastics Engineers, ANTEC Technical Papers, 36, 116-119(1990). 256. D. M. Kalyon, B. Aral and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions," Society of Plastics Engineers, ANTEC Technical Papers, 36, 1560-1564(1990). 257. D. M. Kalyon and D. Czerwonka, "Uniaxial Extensional Flow of Film Blowing Grade Polyethylenes in the Very Low to High Density Range," Plastics and Rubber Processing and Applications 14, 29-33(1990). 258. H. Yao, S. Kovenklioglu and D. M. Kalyon, "Pore Formation in the Pyrolysis of Polymers to Ceramics," Chem. Eng. Comm., 96, 155-175(1990). 259. U. Yilmazer and D. M. Kalyon, "Slip Effects in Viscometric Flows of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Papers, 35, 1682-1686(1989). 260. A. Wagner, J. S. Yu and D. M. Kalyon, "Orientation and Residual Stress Distributions in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Papers, 35, 303-307(1989). 261. J. S. Yu, D. M. Kalyon and A. H. Wagner, "Simulation of Microstructure Development in Injection Molding of Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Papers, 35, 281-285(1989). 262. U. Yilmazer, C. G. Gogos and D. M. Kalyon, "Unstable Flows During Compounding of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Papers, 35, 191-195(1989). 263. A. D. Gotsis and D. M. Kalyon, "Simulation of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Papers, 35, 44-48(1989). 264. D. M. Kalyon and H. N. Sangani, "Characterization of Distributive Mixing in Fully-Intermeshing, Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Papers, 35, 124-128(1989). 265. D. M. Kalyon and H. Sangani, "An Experimental Study of Distributive Mixing in Fully Intermeshing Co-rotating Twin Screw Extruders," Polymer Engineering Science, 29 (15), 1018-1026 (1989).

22

266. U. Yilmazer , C. Gogos and D. M. Kalyon, "Mat Formation and Unstable Flows of Highly Filled Suspensions in Capillaries and Continuous Processors," Polymer Composites, 10 (4), 242-248(1989). 267. U. Yilmazer and D. M. Kalyon, "Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled Suspensions," J. Rheology, 33 (8), 1197-1212 (1989). doi.org/10.1122/1.550049. 268. Wagner, J. Yu and D. M. Kalyon, "Injection Molding of Engineering Plastics," Adv. Polym. Tech., 9 (1), 17-32(1989). 269. D. M. Kalyon, A. Wagner and S. Dey, "Microstructure Development in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Papers, 34, 605-608(1988). 270. D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Towards a Better Understanding of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Papers, 34, 64-66(1988). 271. A. Wagner J. Yu and D. M. Kalyon, "Microstructure and Ultimate Properties of Injection Molded Amorphous Engineering Plastics: Poly(ether Imide) and Poly (2,6-Dimethyl-1,4-Phenylene Ether)," Polymer Engineering and Science, 29 (18), 1298-1307(1988). 272. D. M. Kalyon and F. Moy, "Ultimate Properties of Blown Films of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers," Polymer Engineering and Science, 28 (23), 1551-1558(1988). 273. D. M. Kalyon, D. Yu and J. Yu, "Rheology and Processing of LLDPE Resins as Affected by Higher Alpha-Olefin Comonomers," Polymer Engineering and Science, 28 (23), 1542-1550(1988). 274. D. M. Kalyon, D. Yu and J. Yu, "Melt Rheology of Two Engineering Plastics: Poly(ether imide) and Poly (2,6-dimethyl-1,4 phenylene ether)," Journal of Rheology, 32 (8), 789-811(1988). 275. D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in the Co-rotating Twin Screw Extrusion Process," Innovative Science and Technology Symposium of SPIE, Propulsion , 71-78(1988). 276. D. M. Kalyon, A. Gotsis, U. Yilmazer, C. Gogos, H. Sangani, B. Aral and C. Tsenoglou, "Development of Experimental Techniques and Simulation Methods to Analyze Mixing in Co-rotating Twin Screw Extrusion," Advances in Polymer Technology, 8 (4), 337-353(1988). 277. D. M. Kalyon, J. Yu and C. Du, "A Distributed Model of Flow in Spiral Mandrel Die," Polymer Process Engineering, 5 (2), 179-207(1987). 278. D. M. Kalyon and M. Khemis, "Role of Slip Additives in Blown Film Extrusion of Low Density Polyethylene," Plastics and Rubber Processing and Applications, 8, 157-164 (1987). 279. D. M. Kalyon, "Pressurization and Pumping in Polymer Processing," Chemical Engineering Progress, 48-51, June 1987.

23

280. D. M. Kalyon, "Melting, Softening and Solidification in Polymer Processing," Chemical Engineering Progress, 45-48, June 1987. 281. D. M. Kalyon, "Handling of Particulate Solids," Chemical Engineering Progress, 42-45, June 1987. 282. D. M. Kalyon and S. Kovenklioglu, "Processability of Organometallic Polymer Precursors for Non-Oxide Ceramic Applications," Adv. Polym. Tech., 7 (2), 191-199(1987). 283. D. M. Kalyon, F. Moy, V. Tan and S. Bhakhuni, "Microstructure Development in the Blown Film Extrusion of Linear Low Density Polyethylenes as Affected by Alpha Olefin Comonomers," Society of Plastics Engineers ANTEC Technical Papers, 32, 741-744(1986). 284. D. M. Kalyon and M. Kamal, "An Experimental Investigation of Capillary Extrudate Swell in Relation to Parison Swell Behavior in Blow Molding," Polymer Engineering and Science, 26 (7), 504-512(1986). 285. D. M. Kalyon, V. Tan, S. Bhakhuni and F. Moy, "Microstructure Development in the Blown Film Extrusion of LLDPE's as Affected by Alpha-Olefin Comonomers," J. Film and Sheeting, 2, 310-320(1986). 286. D. M. Kalyon and M. Hallouch, "Compounding of Thermosets in Continuous Kneaders," Adv. in Poly. Tech., 6 (3), 237-249(1986). 287. D. M. Kalyon and F. Moy, "Blown Film Extrusion of Linear Low Density Polyethylenes: Effects of Alpha-Olefin Comonomers," Society of Plastics Engineers ANTEC Technical Papers, 31, 680-684(1985). 288. D. M. Kalyon and M. Hallouch, "Processability of Thermosets as Affected by Compounding Conditions in Continuous Kneaders," Society of Plastics Engineers ANTEC Technical Papers, 31, 1206-1211(1985). 289. D. M. Kalyon and N. Fares, "Chemorheology and Ultimate Properties of Thermosetting Molding Powders Filled with Recycled Thermosets," Plastics and Rubber Processing and Applications, 5 (4), 357-362 (1985). 290. D. M. Kalyon and M. Khemis, "Effects of Slip Additives on the Rheology of LDPE Resins and Ultimate Properties of Blown Films," Society of Plastics Engineers ANTEC Technical Papers, 30, 136-140 (1984). 291. D. M. Kalyon, M. Hallouch and N. Fares, "Recycling of Thermosets as Fillers," Society of Plastics Engineers ANTEC Technical Papers, 30, 640-642(1984). 292. D. M. Kalyon and M. Bouazza, "Compounding Thermosetting Molding Powders in Continuous Kneaders," Society of Plastics Engineers ANTEC Technical Papers, 29, 778-780 (1983). 293. M. Kamal and D. M. Kalyon, "Heat Transfer and Microstructure in Extrusion Blow Molding," Polymer Engineering and Science, 23 (9), 503-509(1983).

24

294. M. Kamal, D. M. Kalyon and V. Tan, "Anisotropy and Dimensions of Blow Molded Polyethylene Bottles," Polymer Engineering and Science, 22, 287-291(1982). 295. M. Kamal, D. M. Kalyon and V. Tan, "Distribution of Thickness and Properties in Blow Molded Polyethylene Bottles," Society of Plastics Engineers ANTEC Technical Papers, 26, 434(1981). 296. M. Kamal, V. Tan and D. M. Kalyon, "Measurement and Calculation of Parison Dimensions and bottle Thickness Distribution during Blow Molding," Polymer Engineering and Science, 21, 331-338 (1981). 297. M. Kamal, D. M. Kalyon and J. Dealy, "An Integrated Experimental Study of the Injection Molding Behavior of Some Polyethylene Resins," Polymer Engineering and Science, 20 (17), 1117-1126(1980). 298. D. M. Kalyon, M. Kamal and V. Tan, "The Dynamics of Parison Development in Blow Molding," Polymer Engineering and Science, 20, 773-777(1980). 299. D. M. Kalyon, V. Tan and M. Kamal, "Dynamics of Parison Development in Blow Molding," Society of Plastics Engineers ANTEC Technical Papers, 24 (1979). PRINTED REPORTS 300. R. Armstrong, R. Brown, D. Kalyon, et al. “Continuous processing of polymer based propellants: A new perspective on research” ONR technical report, prepared for the Mechanics Division of ONR, Feb. 20, 1990. 301. R. Yazici, D. Kalyon and D. Fair, “ Microstructure and Mixing distribution Analysis in M30 Triple-base Propellants”, Report #ARWEC-CR-98015, September 1998, US ARMY Armament Research, Development and Engineering Center, Warheads, Energetics and Combat Support Armaments Center, Picatinny Arsenal, New Jersey. 302. D. Kalyon, E. Birinci, H. Gevgilili, B. Greenberg and D. Fair, “Armament Research, Development and Engineering Center, Armaments Engineering and Technology Center, Picatinny, NJ, Contractor Report ARAET-CR-05008: AD-E403, “Rheological characterization of nitrocellulose gels in the linear viscoelastic range and the development of processing simulants” (2005). BOOK CHAPTERS 303. P. Redner, N. Degirmenbasi, R. Schefflan, M. Mezger, S. Nicolich, S. Kovenklioglu, D. Kalyon, Mathematical modeling and experimental investigations of crystallization and recrystallization processes to achieve targeted polymorphs and size and shape distributions” to appear as Chapter 7, in “Energetic Materials: Advanced Processing Techniques for Next-generation Materials”, Editors M. Mezger, M. pantoya, D. Kalyon, L. Groven and K. Tindle, CRC Press, Taylor and Francis Group, Boca Raton, FL (to appear in Dec. 2016).

25

304. J. Park, H. Pan, M. Mezger, S. Nicolich, J. M. Centrella, F. T. Fisher, M. Malik, S. Aktas and D. M. Kalyon, “Mixing, coating, and shaping processes for energetic formulations”, to appear as Chapter 8 in “Energetic Materials: Advanced Processing Techniques for Next-generation Materials”, Editors M. Mezger, M. pantoya, D. Kalyon, L. Groven and K. Tindle, CRC Press, Taylor and Francis Group, Boca Raton, FL (to appear in Dec. 2016). 305. B. Karuv, S. Aktas, J. He, H. Tang, C. Murphy, S. Prickett and D. Kalyon, “Rheological behavior of energetic gels and suspensions”, to appear as Chapter 9 in “Energetic Materials: Advanced Processing Techniques for Next-generation Materials”, Editors M. Mezger, M. pantoya, D. Kalyon, L. Groven and K. Tindle, CRC Press, Taylor and Francis Group, Boca Raton, FL (to appear in Dec. 2016). 306. M. Malik, R. Muscato, M. Fair, M. Mezger, S. Nicolich, C. Murphy, S. Aktas, J. He, B. Karuv, H. Tang, D.Kalyon, “Continuous Processing and Shaping using a Fully-Intermeshing Co-rotating Twin Screw Extruder” to appear as Chapter 10 in “Energetic Materials: Advanced Processing Techniques for Next-generation Materials”, Editors M. Mezger, M. pantoya, D. Kalyon, L. Groven and K. Tindle, CRC Press, Taylor and Francis Group, Boca Raton, FL (to appear in Dec. 2016). 307. T. Fiske, H. S. Gokturk, R. Yazici and D. Kalyon, “Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles”, in “Imaging and Image Analysis Applications of Plastics”, B. Pourdeyhimi ed., ChemTec Publishing (1999). 308. S. Kovenklioglu and D. M. Kalyon, "Conversion of Polymeric Precursors into Ceramics: Pore Formation," High Performance Composites for the 1990's, S. K. Das, C. P. Ballard and F. Marikar, eds., TMS Publications (1991) 377-387. 309. C. Gogos, D. M. Kalyon, P. Hold, J. Biesenberger and Z. Tadmor, "Polymer Processing," Encyclopedia of Chemical Processing and Design, Volume 39, Marcel Dekker (1992). 310. D. M. Kalyon and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions Which Exhibit Slip at the Wall," Polymer Rheology and Processing, A. Collyer and L. Utracki, eds., Elsevier Applied Science, London (1990). 311. C. Tsenoglou, D. M. Kalyon and C. Gogos, "A Viscoelastic Constitutive Relationship in Flowing Polymer Suspensions and Composites," Engineering Applications of New Composites, S. Paipetis, Ed., Omega Scientific, Oxon, U.K. (1988). 312. D. M. Kalyon, "Mixing in Continuous Processors," Encyclopedia of Fluid Mechanics, 7, Gulf Publishing (1988) Chapter 28, 887-926. 313. D. M. Kalyon, "Applications of Continuous Mixers," Encyclopedia of Engineering Materials, N. Cheremisinoff, ed., Marcel Dekker (1988). 314. M. Kamal and D. M. Kalyon, "Microstructure and Ultimate Properties of Extrusion Blow Molded Polyethylene Bottles," Interrelations Between Processing, Structure and Properties of Polymeric Materials, Elsevier Science Publishers, Amsterdam (1984).

26

315. D.M. Kalyon, "Melt Deformation during Parison Formation and Inflation in Extrusion Blow Molding," Rheology Volume 3: Applications, G. Astarita, G. Marrucci and L. Nicolais, eds., Plenum Press, New York (1980). PATENTS AND INVENTION DISCLOSURES 316. Filippos Tourlomousis, Robert C. Chang and Dilhan M. Kalyon, “Integrated Methods for Precision Manufacturing of Tissue Engineering Scaffolds”, US provisional patent application No. 62/545,527 filed on August 15, 2017. 317. Rebecca Chung, Dilhan Kalyon, Antonio Valdevit, “3D Printed Trans-modular Scaffold Designs for Grafting Applications in Segmental Bone Defects”, US patent application serial No. serial No. 15/568,992, July 25, 2017. 318. Rebecca Chung, Dilhan Kalyon, Antonio Valdevit, “3D Printed Trans-modular Scaffold Designs for Grafting Applications in Segmental Bone Defects”, US provisional patent application serial No. 62/366,378, filing date: July 25, 2016. 319. Erdem Sahin, Dilhan Kalyon and Antonio Valdevit, “Preshearing method and apparatus for the control of the rheology and the injectability of aqueous cement suspensions for bone repair and regeneration”, US Provisional patent application serial No: 62/299,271, filing date: February 24, 2016. 320. Rebecca Chung, Dilhan Kalyon, Antonio Valdevit, “Dual Modulus Scaffold Designs for Bone Graft Incorporation and Stability”, notice of invention submitted to Stevens Institute of Technology (2015). 321. D. Kalyon, H. Tutar-Kahraman, H. Gevgilili, “Novel fire retardant materials and their method of manufacture for fabrication of protective clothing”, notice of invention submitted to Stevens Institute of Technology (2013). 322. S. Senturk, H. Gevgilili and D. Kalyon, “Pretreatment Method of Cellulosic Biomass via Flowability Control and Reactive Extrusion Process”, US patent application publication, 2012/0205059A1, August 16, 2012. 323. A. Ergun, D. Kalyon, H. Gevgilili, A. Valdevit, A. Ritter, “Integrated multi-zonal bioresorbable cage/core devices as bone graft substitutes and apparatus and method of fabrication of such cage/core devices”, US patent application publication US 2012/0150299 A1, June 14, 2012. 324. D. Fair, D. Kalyon, S. Moy and L. Manole, “Cross-sectional functionally-graded Propellants and Method of Manufacture”, US Patent # 7,896,989 issued on March 1, 2011. 325. M. Wazne, D. Dermatas, D. Kalyon, X. Meng, M. Kauris and J. Morris, “Method of Treatment, Stabilization, and Heave Control for Chromite Ore Processing Residues (COPR) and Chromium Contaminated Soils”, US patent # 7,452,163 issued on November 18, 2008. 326. D. Kalyon, J. Kowalczyk and H. Gevgilili, “Screw Extrusion Electrospinning Process (SEEP)”, invention disclosure submitted to Stevens Institute of Technology, September (2006).

27

327. S. Ozkan, D. Kalyon and X. Yu, “Apparatus and method to manufacture three-dimensional functionally-graded scaffolds for tissue engineering applications using extrusion and co-extrusion”, invention disclosure submitted to Stevens Institute of Technology, September (2006). 328. D. Kalyon, C. Erisken and H. Wang, “Apparatus and method to manufacture three dimensional functionally-graded scaffolds for tissue engineering applications using screw extrusion electrospinning process”, invention disclosure submitted to Stevens Institute of Technology, September (2006). 329. D. Kalyon, “Method and Apparatus for the Manufacture of Food Products”, notice of invention submitted to Stevens May 21, 2004. (Two invention disclosures on materials and also method and apparatus aspects). 330. R. Yazici and D. M. Kalyon, "Method and Apparatus for x-ray Analysis of Particle Size" U.S. Patent, #6,751,287 (1999). 331. D. Kalyon, "Method for Continuous Sterilizing and Encapsulation of Medical Waste", notice of invention submitted to Stevens Institute of Technology (1998). 332. D. Kalyon, "Method and Apparatus for the Value-Enhanced Recycling of Energetic Materials", notice of invention submitted to Stevens Institute of Technology (1998). 333. D. M. Kalyon and S. Kovenklioglu, "Disposal Method and Apparatus for Highly Toxic Chemicals by Chemical Neutralization and Encapsulation," U.S. Patent and Trademark Office; #5,584,071 issued on Dec. 10, 1996. 334. D. M. Kalyon, H. S. Gokturk, S. Railkar, "Electric Power Transmission System and Method of Asymmetric Transmission of Power to Mitigate Magnetic Fields," U.S. Patent and Trademark Office; # 5,391,929; issued on Feb. 21, 1995. 335. D. M. Kalyon, H. S. Gokturk, S. Railkar, "A Method and Apparatus for Mitigation of Magnetic Fields from Low Frequency Magnetic Field Sources," U.S. Patent and Trademark Office; # 5,365,115; issued on Nov. 15, 1994. 336. D. M. Kalyon, H. S. Gokturk, "Adjustable Gap Rheometer," U.S. Patent and Trademark Office # 5,277,058; issued on Jan. 11, 1994. PAPERS AT CONFERENCES • Burak Ozcan, Dilhan M Kalyon, Jian Zhou, Sahng G Kim, Jeremy J Mao, Cevat Erisken, "Viscoelastic Properties of Dental Pulp Tissue for Biomaterial Development" ASME NanoEngineering for Medicine and Biology Conference, Houston, TX, Feb. 21-24, 2016. • (Invited talk) D. Kalyon, S. Aktas, H. Gevgilili, I. Kucuk and A. Sunol, “Extrusion of foams from engineering plastics using supercritical CO2”, Polymer Foam 2015, Newark, NJ, April 14, 2015.

28

• D. Kalyon, “Rheology, processing and structure development and ultimate properties of polymeric concentrated suspensions and nanosuspensions”, CHEMTECH ’14 Conference organized by DAKAM (Eastern Mediterranean Academic Research Center) and hosted by Yildiz Technical University, Istanbul, October 23, 2014. • C. Maglaras, A. Ritter, D. Kalyon, A. Ergun-Butros, A. Valdevit,” Response of hydroxyapatite and tricalcium phosphate bone scaffolds to elevated loading frequencies,” Biomedical Engineering Society, San Antonio, Texas, October 22-25, 2014. • C. Maglaras, A. Ritter, D. Kalyon, A. Ergun-Butros, A. Valdevit, “Response of polycaprolactone bone scaffolds with hydroxyapatite and tricalcium phosphate to elevated loading frequencies”, Society of Engineering and Science, West Lafayette, Indiana, October 1-3, 2014. • B. Godsell, R. Chung, C. Maglaras, A. Ritter, D. Kalyon, and A. Valdevit “Fatigue characteristics of PCL dual modulus scaffolds for bone regeneration”, Biomedical Engineering Society (BMES) Annual Meeting, Seattle, Washington, September 25-28, 2013. • D. Kalyon, “Chemical engineering approaches to the design and fabrication of extrusion-based functionally graded scaffolds targeting tissue engineering applications”, AICHE National Meeting, Pittsburgh, October 30, 2012. • D. Kalyon, H. Gevgilili and H. Tang, “Squeeze flow rheometry”, AICHE National Meeting, Pittsburgh, October 31, 2012. • D. M. Kalyon, A. Ergun, S. Ozkan, C. Erisken, E. Elgin, H. Gevgilili, X. Yu, H. Wang, A. Ritter and A. Valdevit, “Novel methods of fabrication of scaffolds for tissue engineering”, NY Academy of Sciences, Chemical Engineering Approaches to Challenges in Energy and Biomedicine Meeting, March 30, 2012, New York, NY. • S. Ozkan, D. Kalyon and X. Yu, “Multifunctional protein-encapsulated polycaprolactone scaffolds”, NY Academy of Sciences, Chemical Engineering Approaches to Challenges in Energy and Biomedicine Meeting, March 30, 2012, New York, NY. • S. Senturk, H. Gevgilili and D. Kalyon, “Biomass pretreatment strategies via control of rheological behavior of biomass suspensions and reactive twin screw extrusion processing”, NY Academy of Sciences, Chemical Engineering Approaches to Challenges in Energy and Biomedicine Meeting, March 30, 2012, New York, NY. • S. Senturk, H. Gevgilili, N. Degirmenbasi and D. Kalyon, “Graded nanobursa meshes”, NY Academy of Sciences, Chemical Engineering Approaches to Challenges in Energy and Biomedicine Meeting, March 30, 2012, New York, NY. • D. M. Kalyon, M. Malik, S. Ozkan and H. Tang, “Development of flow instabilities during extrusion of polyolefins and filled polyolefins as affected by pressure dependent slip at the wall”, MACROMEX 2011-2nd Binational meeting on Advances in Polymer Science”, Riviera Maya, Q. Roo, Dec. 7, 2011 (invited paper).

29

• D. M. Kalyon, F. Fisher and G. Mago, “Nanocomposites of polymers compounded with C nanotubes: Effects on crystallization, cross-linking, viscoelasticity and development of ultimate properties”, MACROMEX 2011-2nd Binational meeting on Advances in Polymer Science”, Riviera Maya, Q. Roo, Dec. 10, 2011. • D. M. Kalyon, A. Ergun, S. Ozkan and C. Erisken, “Novel graded scaffolds, methods of fabrication and applications for bone tissue engineering”, MACROMEX 2011-2nd Binational meeting on Advances in Polymer Science”, Riviera Maya, Q. Roo, Dec. 8, 2011. • Tijen Seyidoglu, Ulku Yilmazer, Dilhan Kalyon, “LLDPE based nanocomposites reinforced with novel organoclays”, Materials Research Society, Boston, MA, November 28, (2011). • John Bolognini, Carlton Adam, Sarah Longo, H. Gevgilili, M. Malik, D. Kalyon, “Linking of deterrent concentration distributions to ballistic performance”, Annual Meeting of the American Institute of Chemical Engineers, Minneapolis, MN, October 20, 2011. • John Bolognini, Sarah Longo, Halil Gevgilili, Semra Senturk, Ilknur Kucuk and Dilhan Kalyon, “Application of the shock gel process for the manufacture of spherical grains”, Annual Meeting of the American Institute of Chemical Engineers, Minneapolis, MN, October 20, 2011. • Moinuddin Malik and Dilhan Kalyon, “Mathematical modeling of the continuous processing of energetic materials in conjunction with a pressure dependent wall slip condition”, Annual Meeting of the American Institute of Chemical Engineers, Minneapolis, MN, October 20, 2011. • A. Ergun, D. Kalyon, A. Valdevit, A. Ritter , X. Yu, “Twin screw extrusion and co-extrusion based fabrication of uniform and multilayered scaffolds for bone tissue engineering”, Orthopaedic Research Society, Annual Meeting, Long Beach, CA, January 13 (2011). • A. Ergun, D. Kalyon, A. Valdevit and A. Ritter, “Compressive fatigue behavior of osteoblast seeded tissue constructs of poly(caprolactone) multilayered scaffolds for bone graft substitute applications”, Orthopaedic Research Society, Annual Meeting, Long Beach, CA, January 13 (2011). • S. Bartolucci, S. Modi, H. Gevgilili, K. Dikovics, F. Fisher, D. Kalyon, “Rheological and thermo-oxidative behavior of carbon nanofibers-poly(ether ether ketone) nanocomposites”, Material Research Society Fall Meeting, Boston, November 30, 2010. • D. Kalyon, M. Malik and Halil Gevgilili, “Sensitivity Control of Energetics through Optimization of Processing Geometry and Conditions”, Annual Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 11, 2010. • J. Bolognini, C. P. Adam, D. Kalyon, H. Gevgilili and M. Malik, “Coating of Energetic Grains with Deterrents to Tailor Ballistic Performance”, Annual Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 11, 2010.

30

• S. Prickett, C. Gonzalez, R. Muscato, H. Gevgilili and D. Kalyon, “Entrainment and Removal of Air During Continuous Processing of Energetics: Ramifications On Rheology, Processing and Safety”, Annual Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 11, 2010. • U. Yilmazer, T. Seyidoglu, and D. Kalyon, “Polypropylene nanocomposites reinforced with organobentonite”, Polymer Processing Society, PPS-26, Istanbul, Turkey, October 22, 2010. • S. Ozkan and D. Kalyon, “Wall slip behavior of a sodium carboxyl methyl cellulose based hydrogel during drag and pressure induced flows”, Society of Rheology, 82nd Annual Meeting, Santa Fe, New Mexico, October 27, 2010. • S. Vural, K. Dikovics and D. Kalyon, “Dispersion of multi-walled carbon nanotubes into crosslinkable polyethylene glycol monoacrylate: Effects on development of crosslink density, viscoelasticity and swelling”, Polymer Processing Society Annual Meeting, Banff, Alberta, Canada, July 8, 2010. • N. Boz, N. Degirmenbasi and D. Kalyon, “Biyokutleden biyoyakit uretiminde kalsiyum oksit destekli katalizor tasarimi ve reaksiyon salismalari”, Ninth National Chemical Engineering Congress, Ankara, Turkey, June 23, 2010. • T. Seyidoglu, U. Yilmazer and D. Kalyon, “Organikkileerin modifiye edilmesi ve polipropilen matris icinde kullanimi”, Ninth National Chemical Engineering Congress, Ankara, Turkey, June 24, 2010. • N. Degirmenbasi, S. Senturk, H. Gevgilili, N. Boz and D. Kalyon, “Gumus nanoparikulleri ile doldurulmus karbon nanotupler”, Ninth National Chemical Engineering Congress, Ankara, Turkey, June 24, 2010. • N. Degirmenbasi, S. Senturk, H. Gevgilili, N. Boz and D. Kalyon, “Metal nanopatikulleri iceren karbon nanotuplerin sentezi ve PCL kullanarak electrospinning yontemi ile nanofibers eldesi”, 9. National Chemical Engineering Congress, Ankara, Turkey, June 25, 2010. • G. Mago, D. Kalyon and F. T. Fisher, “Processing induced crystallization of semicrystalline polymer nanocomposites”, Proceedings of Society for the Advancement of Material and Process Engineering, SAMPE 2010, Seattle, WA, May 17-20, (2010). • A. Ergun, H. Gevgilili, D. Kalyon, X. Yu, A. Valdevit, A. Ritter, “Multilayered biodegradable scaffolds for bone tissue engineering”, International Society of Pharmaceutical Engineering, Newark, NJ, April 26, 2010. • T. Seyidoglu, U. Yilmazer, D. Kalyon, “Linear Low Density Polyethylene/Organoclay/Compatibilizer Ternary Nanocomposites”, 6th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean, Antalya, Turkey, March 11, 2010. • T. Seyido�lu, Ü. Yılmazer, D. Kalyon, “Safla�tırılmı� Bentonitin Alkil Amonyum/Fosfonyum Tuzları �le Modifiye Edilmesi ve Lineer Alçak Yo�unluklu Polietilen Üçlü Nanokompozitlerinde

31

Kullanımı”, Oral Presentation, 3. Polimer Bilimi ve Teknolojisi Kongresi ve Sergisi, May 12-14, 2010, Kocaeli Üniversitesi, Kocaeli, Turkey • S. Ozkan, D. Kalyon and X. Yu, “Functionally-graded poly(caprolactone scaffolds: Fabrication via twin screw extrusion/spiral winding process and in vitro assessment of tissue engineering”, Material Research Society Meeting, Boston, Massachusetts, November 30-December 4, 2009. • H. Tang and D. Kalyon, “Analytical solution for creeping channel flow of non-Newtonian compressible fluid subject to wall slip”, 62nd Annual Meeting of the American Physical Society, Minneapolis, Minnesota, November 23, 2009. • S. F. Bartolucci, G. Mago, H. Gevgilili, S. Vural, K. Dikovics, D. M. Kalyon and F. Fisher, “Investigation of the PEEK-Nanotube Composites Prepared by Solution Methods”, ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, November 13-19, 2009. • S. Prickett, R. Muscato, D. Kalyon, H. Gevgilili, C. Gonzalez, M. Malik, “Theoretical Analyses of Co-Extrusion Process for Co-Layered Energetic Extrudates and Experimental Investigations of Co-Extrusion”, Annual Meeting of the American Institute of Chemical Engineers, Nashville, Tennessee, November 12, 2009. • D. Kalyon, M. Malik, M. Fair, D. Fair, “Imposition of the Pressure-Dependent Wall Slip Condition in Mathematical Modeling of the Continuous Processing of Energetic Materials: Twin Screw Extrusion and Die Flows”, Annual Meeting of the American Institute of Chemical Engineers, Nashville, Tennessee, November 12, 2009. • K. Dikovics and D. Kalyon, ”Nanocomposites of An Engineering Plastic, Poly(ether ether ketone) with Carbon Nanofibers”, Poster presentation, Annual Meeting of the American Institute of Chemical Engineers, Nashville, Tennessee, November 9, 2009. • H. Gevgilili, D. Kalyon, S. Senturk, D. Chiu, S. Moy, “Mathematical Models of the Coating of Energetic Grains Upon Diffusion of Deterrents and Experimental Validation”, Annual Meeting of the American Institute of Chemical Engineers, Nashville, Tennessee, November 12, 2009. • T. Seyidoglu, U. Yilmazer and D. Kalyon, "Preparation of Organoclay from Purified Bentonite and Its Use in Organoclay-Compatibilizer-LLDPE Nanocomposites", 5th Nanoscience and Nanotechnology Conference, p.372, Eskisehir, Turkey, June 8-12, 2009. • F. Fisher and D. Kalyon, “Local Polymer-Nanoparticle Interactions in Polymer Nanocomposites”, Benet Labs Materials Forum: Nano-Scale Materials and Modeling, Watervliet Arsenal, New York, February 19, 2009. • G. Mago, D. M. Kalyon and F.T. Fisher, "Controllable nanocomposite interface microstructure via polymer crystallization-induced wrapping of carbon nanotubes", MRS (Division of Fluid Dynamics)-Fall 2008 Meeting, Boston, MA, December 1-5, 2008.

32

• D. Kalyon, "Rheology and processing of particle-loaded complex fluids at particle concentrations that approach the maximum packing fraction", Thomas Baron Award Lecture, American Institute of Chemical Engineers Centennial National Meeting, Philadelphia, PA, November, 18, 2008. • D. Kalyon and M. Malik, "Incorporation of pressure dependent wall slip to the simulation of the continuous processing of energetic suspensions", American Institute of Chemical Engineers Centennial National Meeting, Philadelphia, PA, November, 20, 2008. • R. Patel, P. Redner, H. Gevgilili and D. Kalyon, "Twin screw extrusion processing of a nanoalumina based formulation in conjunction with a molding powder preparation methodology", American Institute of Chemical Engineers Centennial National Meeting, Philadelphia, PA, November, 20, 2008. • H. Tang, H. Gevgilili and D. Kalyon, "Inverse problem solution of squeeze, rectangular slit, steady torsional and capillary flows to enable the determination of parameters of wall slip and shear viscosity for energetic suspensions", American Institute of Chemical Engineers Centennial National Meeting, Philadelphia, PA, November, 20, 2008. • D. Kalyon, H. Gevgilili, H. Tang and M. Malik, "Effect of pressure on the development of wall slip of complex fluids and ramifications on development of flow instabilities", 15th Joint Ordnance Commanders Group Meeting (JOCG-CMEUG), Rockaway, NJ, October 23, 2008. • G. Mago, D.M. Kalyon, and F.T. Fisher, "Characterization of crystal morphology and microstructure in semicrystalline polymer nanocomposites", Society of Plastics Engineers EPS Division Topical Conference (TopCon), Wilmington, DE, October 13-14, 2008. • G. Mago, D.M. Kalyon, and F.T. Fisher, "Effect of nanoparticles on microstructure and crystallization behavior of Poly(vinylidene fluoride) (PVDF) and PVDF nanocomposites membranes prepared using immersion precipitation technique", 236th National Meeting & Exposition of the American Chemical Society, (paper number-182) Philadelphia, PA, August 17-21, 2008. • G. Mago, D.M. Kalyon, and F.T. Fisher. "Crystallization and morphology of carbon nanotube-Nylon-11 nanocomposites", 236th National Meeting & Exposition of the American Chemical Society, (paper number-283) Philadelphia, PA, August 17-21, 2008. • G. Mago, D.M. Kalyon, and F.T. Fisher, "Polymer crystallization induced wrapping of carbon nanofibers", 2008 Virtual Conference on Nanoscale Science and Technology (VC-NST), University of Arkansas, Fayetteville, Arkansas, July 23-28, 2008. • D. M. Kalyon and H. Tang, "Development of flow instabilities associated with micro-channel flows of polymer melts and polymeric suspensions: Experimental and modeling studies", 60th Annual Meeting of APS Division of Fluid Mechanics, Salt Lake City, Utah, November 18, 2007. • G. Mago, J. A. Dutreuil, F.T. Fisher, and D.M. Kalyon “Structural formation in poly(butylene terephthalate) and PBT nanocomposites during uniaxial deformation”, ASME International Mechanical Engineering Conference and Exposition (IMECE), Seattle, WA, November 11-15, 2007.

33

• G. Mago, C. Velasco-Santos, A.L. Martinez-Hernandez, D.M. Kalyon, and F.T. Fisher, “Effect of Functionalization on the Crystallization Behavior of MWNT-PBT Nanocomposites”, Proceedings of the 2007 MRS Fall Meeting, Boston, MA, November 26-30, 2007. • S. Ozkan, D. Kalyon and X. Yu, “Twin screw extrusion processing and shaping of biodegradable scaffolds with controlled morphologies for tissue engineering applications”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 7, 2007. • C. Erisken, D. Kalyon and H. Wang, “Nanocomposites for tissue engineering applications engineered using a novel twin screw extrusion and electrospinning process (SEEP-Screw Extrusion with Electrospinning”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 8, 2007. • G. Mago, F.T. Fisher, D. M. Kalyon, “Effect of shearing on crystallization behavior and morphology of PVDF nanocomposites”, Virtual Conference on Nanoscale Science and Technology (VC-NST), Fayetteville, Arkansas, October 21-25, 2007. • G. Mago, F.T. Fisher, and D.M. Kalyon “Nanoparticle-enhanced shear-induced crystallization of semicrystalline polymer nanocomposites”, 2007 Joint ASME/ASCE/SES Conference on Mechanics and Materials (McMAT2007), Austin, TX, June 3-7 (2007). • D. Kalyon, S. Ozkan, M. Malik, J. Kowalczyk and M. Mezger, “Twin screw extrusion of nanoenergetics with processing geometries that are tunable to the targeted thermo-mechanical history”, Annual National Meeting of the American Institute of Chemical Engineers, Salt Lake City, Utah, November 8, 2007. • G. Mago, F. T. Fisher, D. M. Kalyon, “ Nanoparticle-enhanced processing-induced crystallization of PVDF and PVDF nanocomposites”, 44th Annual meeting of the Society of Engineering Science, Texas A&M University, College Station, TX, October 21-24, 2007. • J. Kowalczyk, D. Kalyon, H. Gevgilili, “Truly flexible manufacturing technologies for the processing of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006. • D. Kalyon, H. Gevgilili, “Shear roll milling of gun propellants”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006. • D. Kalyon, H. Tang, H. Gevgilili, C. Demir and J. Kowalczyk, “Squeeze flow rheometry of rheological characterization of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006. • S. Ozkan, D. Kalyon, J. Kowalczyk, H. Gevgilili, M. Mezger and C. Demir, “Processing of nanoenergetics with a fully-functional mini-twin screw extruder”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006.

34

• D. Kalyon, H. Gevgilili, J. Kowalczyk, S. Prickett and C. Murphy, “Adjustable gap rheometry for the rheological characterization of energetic formulations”, 2006 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 16, 2006. • G. Mago, F.T. Fisher, and D.M. Kalyon, "Effect of shearing on the crystallization behavior of poly(butylene terephthalate) and PBT nanocomposites", Proceedings of ASME International Mechanical Engineering Conference and Exposition (IMECE), November 5-10, Chicago, IL (2006). • C. Feger, M. McGlashan-Powell, I. Nnebe and D. Kalyon, “Rheology and stability of highly filled thermal pastes”, IMAPS International conference on Device Packaging in conjunction with Global business Council Spring conference in Scottsdale, Arizona, March 21, 2006. • E. Demirkol and D. Kalyon, “Melt processing and rheological behavior of modified clay/polyolefin nanocomposites”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 1, 2005. • N. Degirmenbasi and D. Kalyon, “In-situ synthesis and processing of nano-hydroxyapetite in conjunction with poly(vinyl alcohol) and collagen based matrices and properties of the resulting biocomposites”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 2, 2005. • D. Kalyon, H. Tang and E. Birinci, “Development of extrudate distortions during the extrusion of energetic materials”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005. • H. Gevgilili and D. Kalyon, “Analysis of the fundamentals of the co-extrusion process for co-extrusion of fast/slow burn composite grains”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005. • C. Gonsalves, R. Muscato, S. Prickett, C. Cline, D. Kalyon, M. Malik, J. Kowalczyk, “Development of co-extrusion process for propellant manufacture”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005. • D. Kalyon, E. Birinci and D. Fair, “Rheological characterization of NC gels and development of processing simulants”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005. • S. Prickett, W. G. Thomas, C. Raddack, D. Kalyon, M. Malik, and J. Kowalczyk, “Twin screw extrusion processing of double base propellant”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005. • M. Malik, D. Kalyon and J. Kowalczyk, “Optimization of the selection of the extruder type, geometry and operating conditions for the processing of nano-energetic materials on the basis of FEM analysis”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 3, 2005.

35

• M. Malik and D. Kalyon, “Mathematical modeling of the co-rotating twin screw extrusion process and experimental studies”, 2005 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, Cincinnati, OH, November 4, 2005. • (Key note address of Innovative Materials and Processes Session) D. Kalyon, “A novel process development platform for flexible manufacturing”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 17, 2005. • S. Ozkan and D. Kalyon “Twin screw extrusion processing of nanocomposites with hydrogel based binders”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 15, 2005. • D. Kalyon, H. Gevgilili and A. Mirza, “Co-extrusion of concentrated suspensions”, Polymer Processing Society, America’s Regional Meeting, Quebec City, Canada, August 17, 2005. • Kristin L. Jasinkiewicz, Timothy E. Dawag, Michael Fair, Roderick King, Dilhan Kalyon, Elvan Birinci and Halil Gevgilili, “Continuous Processing of Black Powder”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004. • Suzanne Prickett, William Newton, Stuart Richman, Wayne Thomas, Christopher Gonzalez, Dilhan M. Kalyon, Halil Gevgilili, Moinuddin Malik Tugrulbey Kiryaman and James E. Kowalczyk, "Twin screw extrusion processing of double base rocket propellant", 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004. • Dilhan M. Kalyon, "Rheological characterization platforms for the extrudability and safety analysis of energetic materials ", 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004. • H. S. Tang and D. M. Kalyon. “Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 8, 2004. • James E. Kowalczyk, James B. Graybill, Moinuddin Malik, Dilhan Kalyon, Halil Gevgilili, Mark Mezger and Brett Reddingius “Novel Extrusion Platforms for the Continuous Processing of Energetics”, 2004 Annual Meeting of American Institute of Chemical Engineers, Austin, Texas, November 11, 2004. • D. Kalyon, H. Gevgilili, E. Birinci, H. Tang, J. Kowalczyk and B. Karuv, “Novel rheological characterization platforms for the extrudability and safety analysis of energetic materials”, 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004. • M. Malik, T. Kiryaman and D. Kalyon, “Mathematical modeling of the twin screw extrusion processing of energetic materials using tangential versus fully -intermeshing extruders”, 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004.

36

• D. Kalyon, D. Dalwadi, M. Erol, B. Greenberg and E. Birinci, “Rheological behavior of concentrated suspensions as affected by the degree of mixedness of their ingredients”, 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004. • J. Kowalczyk, J. Graybill, B. Karuv, D. Kalyon, H. Gevgilili, M. Zghaibeh, S. Ozkan, M. Mezger and B. Reddingius, “Design and manufacture of the smallest twin screw extruder in the World for the processing of nanoparticles into nanoenergetics and nanocomposites”, 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004. • D. Kalyon, H. Tang, E. Birinci and H. Gevgilili”, Predictions of the onset of the flow instabilities and gross surface irregularities of energetic grains during extrusion”, 13th Joint Ordnance Commanders group (JOCG) Continuous Mixer and Extruder Users Group Meeting, Hoboken, NJ, October 14, 2004. • S .E. Prickett, C. Gonzalez and D. M. Kalyon, Twin Screw Extrusion Formulation Development and Rheological Characterization of Co-Layered Gun Propellant, JANNAF Interagency Propulsion Committee 32nd Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center , Seattle Washington, July 29 (2004). • D. Kalyon, “Twin screw extrusion of solid rocket fuels and propellants”, 2003 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 20, 2003. • D. Kalyon, E. Birinci and H. Gevgilili, “Development of extrudate distortions as affected by wall slip behavior of polymers and filled polymers”, 2003 Annual Meeting of American Institute of Chemical Engineers Annual Meeting, San Francisco, CA, November 17, 2003. • H. Gocmez, B. Greenberg, R. Schefflan and D. Kalyon, “Development of Methodologies for the Control of the Polymorph and Morphology of Crystalline Energetics”, Second Advanced Energetics Technical Exchange, Aberdeen Proving Ground, MD, September 22, 2003. • G. Lu, D. Kalyon, I. Yilgor and E. Yilgor, “Extrusion of BaSO4 filled medical-grade thermoplastic polyurethane”, Society of Plastics Engineers Annual Technical Conference, Knoxville, Tennessee, May 6 (2003). • G. Lu, D.M. Kalyon, I. Yilgor and E. Yilgor, "Coextrusion of TPU and BaSO4 filled Medical-Grade TPU”, Society of Plastics Engineers Annual Technical Conference, Knoxville, Tennessee, May 5 (2003). • B. Greenberg, D. Kalyon, M. Erol, M. Mezger, P. Redner, K. Lee and S. Lusk, “Structural analysis of slurry coated CL-20 (PAX 12 granules) using a novel grazing incidence x-ray diffraction method”, Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 25 (2003).

37

• S. E. Prickett, C Murphy, W. Thomas and D. Kalyon, “Shear viscosity, extrudate swell and wall slip behavior of a double base propellant”, Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Charlottesville, VA, March 26 (2003). • D. M. Kalyon and H. Gevgilili, “The fundamentals of shear roll mill processing of gun propellants”, Joint Ordnance Commanders Group 12th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 29, 2002. • H. Tang and D. M. Kalyon, “The solution of the inverse problem for the determination of the parameters of constitutive equations and wall slip for capillary and squeeze flows”, Joint Ordnance Commanders Group 12th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 29, 2002. • H. Gevgilili and D. M. Kalyon, “The development of flow instabilities and gross surface irregularities with BAMO/AMMO and other filled systems”, Joint Ordnance Commanders Group 12th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 31, 2002. • M. Malik and D. M. Kalyon, “The coupled 3-D simulation of flow and heat transfer in the extruder and the die”, Joint Ordnance Commanders Group 12th Continuous Mixer and Extruder Users Group Meeting”, Indian Head, Maryland, October 31, 2002. • D. Kalyon, E. Birinci and H. Gevgilili, “Development of extrusion instabilities for filled polymers”, Society of Rheology 74th Annual Meeting, Minneapolis, Minnesota, October 15, 2002. • A. Shah, H. Gevgilili and D. Kalyon, “Detachment of the polymer from the rolls in shear roll mill process”, Society of Rheology 74th Annual Meeting, Minneapolis, Minnesota, October 16, 2002. • D. Kalyon and H. Gevgilili, “Strong Interactions at the wall to generate anomalous slip behavior during flows of complex fluids”, Society of Rheology 74th Annual Meeting, Minneapolis, Minnesota, October 17, 2002. • E. Birinci, D. Kalyon, and C. Tsenoglu, “Effects of the specific energy input during mixing and the resulting degree of mixedness on the rheological behavior of concentrated suspensions”, Society of Rheology 74th Annual Meeting, Minneapolis, Minnesota, October 17, 2002. • G. Lu and D. Kalyon, “ Rheology and structure evolution during flow of a medical-grad thermoplastic polyurethane”, Society of Rheology 74th Annual Meeting, Minneapolis, Minnesota, October 16, 2002. • H. Gevgilili and D.M. Kalyon, "Catastrophic Failure of the No-slip Condition at the Wall during Torsional Flows and Development of Gross Surface Irregularities during Capillary flow of three Polymers", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002). • D.M. Kalyon and E. Birinci, "Electrical Conductivity of a Graphite based Composite as affected by the degree of mixedness of Graphite in the Elastomeric Matrix", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002).

38

• D.M. Kalyon and H. Gevgilili, "Effect of Wall Slip of Polymer Melts on their Relaxation Modulus Behavior", Society of Plastics Engineers Annual Technical Conference, San Francisco, May 8 (2002). • Dilhan M. Kalyon, “Rheological Behavior of Concentrated Suspensions”, Keynote Lecture, Polymer Processing Society Regional Meeting, Antalya, Turkey, October 22, 2001. • Dilhan M. Kalyon, “Extrusion of Highly Filled Materials: Rheology, Structure Development, Mathematical Modeling and Experimental Studies, Polymer Processing Society Regional Meeting, Antalya, Turkey, October 22, 2001. • Dilhan M. Kalyon, “New Developments in Rheological Characterization of Energetic Materials”, 2001 Continuous Mixer and Extruder users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001. • Dilhan M. Kalyon, “Continuous Processing of Energetic Materials”, 2001 Continuous Mixer and Extruder users’ Group Meeting, Picatinny Arsenal, Dover NJ on May 2, 2001. • R. Schefflan, S. Kovenklioglu and D. Kalyon, “Modeling of Aluminum Nanoparticle Formation”, 199th Meeting of the Electrochemical Society on March 27, 2001 in the Fundamental Gas-Phase and Surface Chemistry of Vapor Deposition II and Process Control, Diagnostics and Modeling Symposium”, Washington, DC. • M. Mezger, S. Nicolich, R. Yazici, D. Kalyon, “Characterization of coating for energetic material”, International Annual Conference at Frauhofer Institute fur Chemiche Technologie, Berghausen: Fraunhofer-Institute fur Chemiche Technologie, Germany (2001).

• M. Gallant, W. Newton, S. Johnson, S. Prickett, D. M. Kalyon, A. Lawal and S. Railkar, “Twin Screw Processing of GEM Gun Propellant”, Joint Ordnance Commander’s Group 10th Continuous Mixer and Extruder Users Group Meeting, Thiokol Center, Ogden, Utah, May 10, 1999. • D. M. Kalyon, S Railkar and A. Lawal, “New Techniques for the Simulation of Die and Twin Screw Extrusion Processing of Energetic Materials”, Joint Ordnance Commanders Group 10th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999. • J. Kowalczyk and D. Kalyon, “Simulation Based Design and Manufacture of Screws and Dies for the Energetics Industry”, Joint Ordnance Commanders Group 10th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999. • R. Yazici and D. M. Kalyon, “On-Line and Off-line Analysis of the Extruded and Cast Energetic Materials for Microstructural Distributions”, Joint Ordnance Commanders Group 10th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999. • D. M. Kalyon, B. Karuv and J. Garrow, “A New Squeeze Flow Rheometer for the Rheological Characterization of Energetic Materials”, Joint Ordnance Commanders Group 10th Continuous Mixer and Extruder Users Group Meeting”, Ogden, Utah, May 11, 1999.

39

• E. Birinci, R. Yazici, and D. M. Kalyon, “Statistics of Mixing Distributions in Filled Elastomers Processed by Twin Screw Extrusion”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • R. Yazici, B. Karuv, E. Birinci, J. Garrow, and S. Walsh and D. M. Kalyon, “Particulate based Conductive Composites Exploiting Percolation-Range Microstructure”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • M. Rege, S. Kovenklioglu, R. Yazici, D. M. Kalyon, and E. Birinci, “Elastomeric Coating of Filler Powders by Slurry Precipitation”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • M. Allende and D. Kalyon, “Assessment of Particle Migration Effects in Capillary Rheometry of Filled Polymers”, Society of Plastics Engineers 57th Annual Technical Conference, New York City, May 3-7, (1999). • A. Lawal and D. Kalyon, “Squeeze Flow Rheometer”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • E. Kucukpinar, D. Kalyon and P. Tong, “Viscoelasticity of Polyethylenes Produced with Single Site Metallocene Catalysis”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • A. Lawal, S. Railkar and D. Kalyon, “3-D Analysis of Fully Flighted Screws of Co-Rotating Twin Screw Extruders”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • A. Lawal, S. Railkar and D. Kalyon, “Mathematical Modeling of Three-Dimensional Die Flows of Viscoplastic Fluids with Wall Slip”, Society of Plastics Engineers 57th Annual Technical Conference, New York City , May 3-7, (1999). • D. Kalyon, “Rheology and Extrusion of Highly Filled Pastes and Suspensions”, Symposium of Particle Technology, Newark, New Jersey, March 25, 1999. • D. M. Kalyon, “Twin Screw Extrusion of Suspensions with High Degree of Solid Fill”, CAE in Polymer Processing Gordon Research Conference”, Ventura, California, March 16, 1999. • D. Kalyon and A. Lawal, “Viscous Heating in Non-Isothermal die Flows of Viscoplastic Fluids with Wall Slip”, Polymer Processing Society, North American Meeting, Toronto, Canada, August 18, 1998. • M. Allende and D. M. Kalyon, “ Migration of Particles in Pressure Driven Flows”, 70th Annual Meeting of Society of Rheology, Monterrey, California, October 8, 1998.

40

• R. Yazici and D. M. Kalyon, “Measurement of Processing Effects on Crystal Defects”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998) • R. Yazici and D. M. Kalyon, “Quantitative Measurement of Mixing Quality”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998). • S. Kovenklioglu, R. Yazici and D. M. Kalyon, “Environmentally Acceptable Alternative Solvent Systems for CL-20 Processing”, 1998 Joint Army, Navy, NASA, Air Force Propellant Development and Characterization Meeting, Houston, Texas, April 20-24 (1998). • A. Lawal and D. Kalyon, "Viscous Heating in Nonisothermal Die Flows of Viscoplastic Fluids with Wall Slip", Polymer Processing Society North American Meeting, Toronto, Ontario, Canada, August 18 (1998). • D. M. Kalyon, “Extrusion of Highly Filled Suspensions”, Plenary Talk in Recent Advances in Powder Technology Particle Technology Forum, 1997 Annual Meeting of American Society of Chemical Engineers, Los Angeles, California, November 17, 1997. • B. Aral and D. M. Kalyon, "Viscoelasticity of Concentrated Suspensions with Non-Colloidal Spherical Particles" 68th Annual Meeting of Society of Rheology Galveston, Texas, February (1997) • D. M. Kalyon, A. Lawal, S. Railkar, "Numerical Simulation of Coupled Extrusion and Die Flows" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February, (1997) • A. Wagner, T. J. Fiske and D. M. Kalyon, "Uniaxial Extensional Flow of Polyamide/glass Fiber Suspensions" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February (1997) • D. M. Kalyon, H. Gokturk and I. Boz, "Continuously Adjustable-Gap In-Line Rheometer" 68th Annual Meeting of Society of Rheology, Galveston, Texas, February, (1997) • D. M. Kalyon (invited talk) “Mathematical Modeling and Experimental Studies of Twin Screw Extrusion Processing of Filled Polymers”, International Symposium on Polymer Blends, Alloys and Filled Systems”, Montreal, Canada, October 9, (1997). • T. Fiske, H. S. Gokturk, R. Yazici and D. M. Kalyon, "Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles", SPE Annual Technical Conference, Toronto, Canada, May (1997) • E. Kucukpinar and D. M. Kalyon, "Viscoelasticity and Processability of a BAMO/AMMO Thermoplastic Elastomer" Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997) • R. Yazici and D. M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-angle x-ray Diffraction" Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997)

41

• A. Wagner, D Kalyon, R. Yazici, and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997) • D. M. Kalyon, H. Gokturk and I. Boz, "An Adjustable Gap In-Line Rheometer", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997) • Z. Cao, S. Kovenklioglu, R. Yazici and D. M. Kalyon, "Dissolution Rates of Oxetane Thermoplastic Elastomer for Dissolution based Recycling of Elastomeric Formulations", Society of Plastics Engineers Annual Technical Conference, Toronto, Canada, May (1997) • S. E. Prickett, D. M. Kalyon and S. Railkar, " Temperature Dependent Shear Viscosity Material Function of AA-6 Propellant" JANNAF Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center , Sunnyvale, California, April (1997) • D. M. Kalyon, S. Railkar, M. Michienzi and C. M. Murphy "Die Design for Twin Screw Extruded Composite Propellant Grain" JANNAF Conference Propellant Development and Characterization Subcommittee Meeting, NASA AMES Center, Sunnyvale, California, April (1997) • M. A. Michienzi, C. M. Murphy, D. M. Kalyon and S. Railkar, "Wall Slip and Capillary Flow Behavior of Extrudable Composite Propellant", "JANNAF Conference Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997) • D. M. Kalyon, S. Railkar, S.E. Prickett, M. A. Michienzi, C. M. Murphy and F. M. Gallant, "Capillary and On-Line Slit Rheometry of an HE LOVA Gun Propellant Formulation," "JANNAF Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997) • D. M. Kalyon, S. Railkar, H. Gokturk, l. Boz and R. Guy, "Twin Screw Extrusion Processing of Extrudable Composite Propellant Simulant", "JANNAF Conference Propellant Development and Characterization Subcommittee Meeting", Sunnyvale, California, April (1997) • S. Railkar, A. Lawal and D. M. Kalyon, " 3-D FEM Analysis of Regular Flighted Single and Twin Screw Extruder Screw Elements", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June (1997) • E. Kucukpinar and D. M. Kalyon "Viscoelastic Material Function and Extrudability of BAMO/AMMO TPE", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997) • S, Kovenklioglu, Z. Cao, R. Yazici, S. Railkar, E. Kucukpinar and D. M. Kalyon, "Twin Screw Extrusion Based Recovery, Recycle and Reuse of Grains with Energetic TPE Binder," 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997)

42

• R. Yazici, E. Birinci, D. Fair, W. Ansley and D. M. Kalyon, "X-ray Based Degree of Mixing Analysis of Extruded Grains: Ramifications for On-Line Control of Continuous Processing", 9th Continuous Mixer and Extruder Users Group Meeting, Weehawken, NJ, 2-4 June, (1997) • B. Aral and D. M. Kalyon, " Viscoelastic Behavior of Filled Polymers", 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • M. Allende and D.M. Kalyon, "Shear-induced Particle Migration in Concentrated Suspensions of non-colloidal Particles," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • H. Wagner, D. M. Kalyon, R Yazici and T. J. Fiske, "Extensional Flow of Engineering Plastics with Glass Fibers," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • A. Lawal, S. Railkar and D. M. Kalyon, "3-D Analysis of Fully Flighted Screws of Co-Rotating Twin Screw Extruder," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • E. Kucukpinar and D. M. Kalyon "Viscoelasticity and Processability of a Thermoplastic Elastomer," 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • D. M. Kalyon and H. Gokturk, "An Adjustable Gap In-Line Rheometer" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • S. Railkar, A Lawal and D. M. Kalyon, "Twin Screw Extrusion and Die Flow of Filled Elastomer" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • R. Yazici and D. M. Kalyon, "Analysis of Degree of Mixing in Filled Polymers by Wide-Angle X-Ray Diffraction" 9th international Meeting of the Polymer Processing Society, Secaucus, NJ, June 10-13, (1997) • A. Wagner and D. M. Kalyon, "Parison Formation and Inflation of Polyamides in Blow Molding", Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996. • T. Fiske, H. Gokturk and D. M. Kalyon, "Relative Magnetic Permeability of Polymeric Composites with Hybrid Particulate Fillers," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996. • T. Fiske, A. Wagner, R. Yazici and D. M. Kalyon, "Uniaxial Extensional Flow Behavior of Fiber Filled Suspensions as Affected by Fiber Aspect Ratio and Concentration," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996. • A. Lawal, S. Railkar, P. Yaras and D. M. Kalyon, "Twin Screw Extrusion Processing of Filled Polymers," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996.

43

• A. Lawal, S. Railkar and D. M. Kalyon, "Coupled Simulation of Die and Extrusion Flows Using Three-Dimensional Finite Element Method," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996. • A. Wagner, D. M. Kalyon and V. Tan, "Microstructural Distributions in Extrusion Blow Molded Semicrystalline Resins," Society of Plastics Engineers ANTEC Conference, Indianapolis, IN, May 5-9, 1996. • M. Michienzi, C. Murphy and D. M. Kalyon, "Using Instrumented Capillary Dies to Characterize the Rheology of Extruded Composite Propellant," Proceedings of JANNAF Conference, April 1996. • R. Yazici and D. M .Kalyon, "Novel X-ray-based Crystalline Defect Analysis Technique," Energetic Materials Workshop, Annapolis, MD Dec. 3-6, 1996. • D. M. Kalyon, "Twin Screw Extrusion Processing of Highly Filled Materials: Experiments vs. Theory," Proceedings of 8th Annual Continuous Mixer and Extruder Users' Group Meeting, hosted by Indian Head Division of Naval Surface Warfare Center and Navy Energetics Manufacturing Technology Center of Excellence, September 20-22, 1995. • D. M. Kalyon, "Rheological Behavior and Continuous Processing of Propellants," BMDO/IST Workshop, Chestertown, MD, Oct. 12, 1995. • D. M. Kalyon (joint paper with S. Kovenklioglu, R. Yazici and Z. Cao), "Introduction of Recycling Technologies to Production of Propellant, Explosives and Pyrotechnics," SERDP Workshop and Progress Review Meeting, Arlington, VA, Nov. 15, 1995. • R. Yazici and D. M. Kalyon, "Degree of Mixing Analysis of Propellants by a Novel Wide-Angle X-ray Diffraction Method," Joint Ordnance Commanders Explosives and Propellants Subgroup, Picatinny Arsenal Army Base, NJ, Nov.7, 1995. • D. M. Kalyon, "Simulation of Continuous Processing of Propellants and Explosives," Joint Ordnance Commanders Explosives and Propellants Subgroup, Picatinny Arsenal Army Base, NJ, Nov. 7, 1995. • D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Motion Analysis of Development of Wall Slip During Die Flow of Concentrated Suspensions," SPE ANTEC Conference, Boston, MA, May 7-11, 1995. • P. Yaras, A. Lawal and D. M. Kalyon, "Twin Screw Extrusion of Concentrated Suspensions," Society of Rheology, 67th Annual Meeting, Sacramento, CA, Oct. 8-12, 1995. • D. M. Kalyon, H. Gokturk, P. Yaras and B. Aral, "Development of Wall Slip During Die Flow of Concentrated Suspensions as Revealed by High Speed Cinematography," Society of Rheology, 67th Annual Meeting, Sacramento, CA, Oct. 8-12, 1995.

44

• D. M. Kalyon, "Rheology of Highly Filled Materials," Eighth Annual Meeting of Continuous Mixer and Extruder Users' Group Meeting, Alexandria, VA, Sep. 20, 1995. • D. M. Kalyon, "Twin Screw Extrusion of Highly Filled Materials," Eighth Annual Meeting of Continuous Mixer and Extruder Users' Group Meeting, Alexandria, VA, Sep.20, 1995. • D. M. Kalyon and S. Kovenklioglu, "Concomitant Neutralization, Gelation and Encapsulation of Chemical Munitions," Symposium on Alternatives to Incineration for Disposal of Chemical Munitions and Energetics, Stevens Institute of Technology, Hoboken, NJ, June 5-6, 1995. • D. M. Kalyon, "Rheological Behavior of Highly Filled Materials," Proceedings of 8th Annual Continuous Mixer and Extruder Users' Group Meeting, hosted by Indian Head Division of Naval Surface Warfare Center and Navy Energetics Manufacturing Technology Center of Excellence, September 20-22, 1995 September 20-22, 1995. • D. M. Kalyon, "Mathematical Modeling of Extrusion Flows of Concentrated Suspensions," Seminar at Pure and Applied Mathematics Department, Stevens Institute of Technology, Hoboken, NJ, Nov. 16, 1994. • R. Yazici, A. Wagner, D. M. Kalyon and S.B. Han, "Extrudate Swell Behavior of Engineering Plastics Reinforced with Glass Fibers," Society of Plastics Engineers ANTEC Technical Conference, San Francisco, CA, May, 1994. • D. M. Kalyon, "Rheological Behavior of Highly Filled Suspensions," 7th Annual Meeting of Mixer and Extruder Users Group, Phoenix, AZ, March 16, 1994. • D. M. Kalyon, "Simulation of Continuous Processing of Highly Filled Suspensions," 7th Annual Meeting of Mixer and Extruder Users Group, Phoenix, AZ, March 16, 1994. • D. M. Kalyon, "Rheological Behavior of Solid Rocket Fuel Simulants," ADPA International Meeting, Orlando, FL, March 21-25, 1994. • S. Gokturk, P. Yaras and D. M. Kalyon, "Monitoring of the Slit Flow of a Highly Filled Suspension by Laser Video Microscopy," Optical Society of America Annual Meeting, Toronto, Canada, Oct. 6, 1993. • D. M. Kalyon, "Techniques to Analyze Goodness of Mixing of Concentrated Suspensions and Simulation of Mixing in Extrusion Flows," 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Lawrence Livermore National Laboratory, Livermore, CA, April 28, 1993. • D. M. Kalyon, "Rheological Behavior of Solid Rocket Fuel Simulants," 1993 JANNAF Propellant Development and Characterization Subcommittee Meeting, Lawrence Livermore National Laboratory, Livermore, CA, April 29, 1993.

45

• Lawal and D. M. Kalyon, "Three Dimensional Analysis of Co-rotating Twin Screw Extrusion Using Tools of Dynamics," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • Lawal and D. M. Kalyon, "Extrusion of Viscoplastic Fluids Subject to Different Slip Coefficients at Screw and Barrel Surfaces," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • R. Yazici and D. M. Kalyon, "Characterization of Degree of Mixing of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • Aral and D. M. Kalyon, "Time-Dependent Development of Wall Slip in Shear Flows of Concentrated Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • Gokturk, T. Fiske and D. M. Kalyon, "Dielectric Properties of Polyethylene-Stainless Steel Fiber Composites," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • P. Yaras, U. Yilmazer and D. M. Kalyon, "Unstable Flow of Concentrated Suspensions in Tube Flow," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • H. Wagner and D. M. Kalyon, "Extrudate Swell, Rheological Behavior and Parison Formation of Blow Molding Grade Engineering Resins," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • T. Fiske, H. Gokturk and D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Ferromagnetic Powders," Society of Plastics Engineers ANTEC Technical Conference, New Orleans, LA, May 1993. • S. Gokturk, T. Fiske and D. M. Kalyon, "Granular Magnetic Composites Employing Cobalt Based Amorphous Alloys in a Polymeric Host," 37th Annual Conference on Magnetism and Magnetic Materials, Houston, TX, Dec. 1-4, 1992. • D. M. Kalyon, "Simulation of Continuous Processing of Highly Filled Suspensions," Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, Nov. 17, 1992. • D. M. Kalyon, "Rheological Behavior of Highly Filled Suspensions," Joint Ordnance Commanders Group, 6th Annual Meeting of the Continuous Extruder and Mixer Users Group, sponsored by US Army and Navy, Phoenix, AZ, Nov. 17, 1992. • Lawal and D. M. Kalyon, "Processing of Viscoplastic Fluids in Single Screw Pumps Subject to Wall Slip: An Analytical Model," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992.

46

• Lawal and D. M. Kalyon, "Non-Isothermal Modeling of Single Screw Extrusion Processing of Concentrated Suspensions with Wall Slip," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992. • Wagner and D. M. Kalyon, "Parison Formation Behavior of Blow Molding Grade Semi-Crystalline Resins," The Polymer Processing Society, Technical Program, Knoxville, TN, Oct. 19-21, 1992. • Y. Chen, D. M. Kalyon and E. Bayramli, "Wall Slip Behavior of Linear Low Density Polyethylene in Capillary Flow: Effects of Materials of Construction and Surface Roughness," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • Aral, D. M. Kalyon and H. Gokturk, "The Effects of Air Incorporation in Concentrated Suspension Rheology," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • Gokturk, T. Fiske, D. M. Kalyon, "Electric and Magnetic Properties of Low Density Polyethylene Filled with Nickel Powders, Fibers, and Flakes," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • S. Railkar, H. Gokturk and D. M. Kalyon, "Development of Mathematical Tools to Determine Optimum Enclosure Designs for Controlling Electromagnetic Fields," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • Z. Ji and D. M. Kalyon, "Two Dimensional Computational Study of Chaotic Mixing in Two-tipped Kneading Paddles of Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • A. Lawal and D. M. Kalyon, "A Non-isothermal Model of Single Screw Extrusion Processing of Viscoplastic Materials Subject to Wall Slip," Society of Plastics Engineers ANTEC Technical Conference, Detroit, MI, May 3-7, 1992. • D. M. Kalyon, "Simulation and Experimental Studies of Continuous Processing of Concentrated Suspensions in Twin Screw Extruders," Joint Ordnance Commanders Group 5th Annual Meeting of the Continuous Mixer and Extruder Users Group, sponsored by US Army and Navy, Williamsburg, VA, Dec. 2, 1991. • D. M. Kalyon, B. Aral and U. Yilmazer, "Rheological Behavior of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • W. Sinton, J. C. Crowley, G. A. Lo, D. M. Kalyon and C. Jacob, "Nuclear Magnetic Resonance Imaging Studies of Mixing in Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • Yao, H. Suwardie, D. M. Kalyon and S. Kovenklioglu, "Conversion of Polymeric Precursors into Ceramics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990.

47

• S. Yu, M. Lim and D. M. Kalyon, "Characterization and Simulation of Density Distributions in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • H. Wagner and D. M. Kalyon, "Formation of Cracks in Injection Molded Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • D. Gotsis, A. Ji and D. M. Kalyon, "3-D Analysis of the Flow in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • Z. Ji, A. Gotsis and D. M. Kalyon, "Single Screw Extrusion Processing of Highly Filled Suspensions Including Wall Slip," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • D. M. Kalyon and J. Yu, "Microstructure Development in Blow Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Dallas, TX, May 1-5, 1990. • D. M. Kalyon, A. Gotsis, U. Yilmazer and Z. Ji, "Simulation and Experimental Studies of Mixing in Co-rotating Twin Screw Extruders," PPS Meeting, August 17, 1989. • D. M. Kalyon and H. N. Sangani, "Characterization of Distributive Mixing in Fully-Intermeshing, Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • D. Gotsis and D. M. Kalyon, "Simulation of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • U. Yilmazer, C. G. Gogos and D. M. Kalyon, "Unstable Flows During Compounding of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • S. Yu, D. M. Kalyon and A. H. Wagner, "Simulation of Microstructure Development in Injection Molding of Amorphous Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • H. Wagner, J. S. Yu and D. M. Kalyon, "Orientation and Residual Stress Distributions in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • U. Yilmazer and D. M. Kalyon, "Slip Effects in Viscometric Flows of Highly Filled Suspensions," Society of Plastics Engineers ANTEC Technical Conference, New York, NY, May 1-4, 1989. • D. M. Kalyon, U. Yilmazer and B. Aral, "Rheological Behavior of Highly Filled Suspensions," Society of Rheology Meeting, Montreal, Canada, November, 1989.

48

• S. W. Sinton, J. C. Crowley, R. Van de Griend, D. T. Wadiak, B. H. Suits and D. M. Kalyon, "NMR Imaging of Particle/Polymer Suspensions," Pacific Coast Conference on Spectroscopy and Chemistry, San Francisco, CA, 1988. • D. M. Kalyon, "Dynamics of the Blow Molding Process and Properties of Blow Molded Articles," Polymer Processing Society, Fourth Annual International Meeting, Orlando, FL, May 8-11, 1988. • D. M. Kalyon and A. Gotsis, "Simulation of TSE: Source Code Development on a Supercomputer," Poster Presentation at Newark Remote Access Center of JVNC, Mini-symposium, Newark, NJ, April 25, 1988. • D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Towards a Better Understanding of Mixing in Co-rotating Twin Screw Extruders," Society of Plastics Engineers ANTEC Technical Conference, Atlanta, GA, April 17-21, 1988. • D. M. Kalyon, A. Wagner and S. Dey, "Microstructure Development in Injection Molded Engineering Plastics," Society of Plastics Engineers ANTEC Technical Conference, Atlanta, GA, April 17-21, 1988. • D. M. Kalyon, A. Gotsis, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in the Co-rotating Twin Screw Extrusion Process," Symposium on Innovative Science and Technology, Los Angeles, CA, Jan 10-15, 1988. • D. M. Kalyon and S. Dey, "Rheology and Injection Molding of Engineering Plastics: Poly(ether imide) and Poly(phenylene oxide) Resins," 37th Canadian Chemical Engineering Conference, in conjunction with Canadian Eng. Centennial Convention, Montreal, Canada, May 18-22, 1987. • D. M. Kalyon and S. Kovenklioglu, "Processability of Polymeric Precursors for Non-Oxide Ceramic Applications," AIChE Conference on Emerging Technologies in Materials, Minneapolis, Minn., August 18, 1987. • Tsenoglou, D. M. Kalyon and C. Gogos, "A Constitutive Equation for Flowing Polymer Suspensions," AIChE Conference on Emerging Technologies in Materials, Minneapolis, Minn., August 18, 1987. • Gotsis, D. M. Kalyon, C. Gogos and C. Tsenoglou, "Simulation of the Mixing of Highly Filled Suspensions in Co-rotating Twin Screw Extrusion Process," Polymer Processing Society, North American Meeting, Sep 29, 1987. • D. M. Kalyon, S. Dey and A. Wagner, "Injection Molding of Two Engineering Plastics: Poly(ether imide) and Poly(phenylene ether)," Polymer Processing Society, North American Meeting, Sep 29, 1987. • D. M. Kalyon, F. Moy, V. Tan and S. Bhakhuni, "Microstructure Development in the Blown Film Extrusion of Linear Low Density Polyethylenes as Affected by Alpha Olefin Comonomers," Society of Plastics Engineers, 44th Annual Technical Conference, Boston, MA, May 1-4, 1986.

49

• C. Tsenoglou, D. M. Kalyon and C. Gogos, "A Viscoelastic Constitutive Relationship for Flowing Polymeric Suspensions and Composites," Symposium of Engineering Applications of New Composites at the University of Patras, Patras, Greece, August 27, 1986. • D. M. Kalyon and M. Hallouch, "Processability of Thermosets as Affected by Compounding Conditions in Continuous Kneaders," Society of Plastics Engineers, 43rd Annual Technical Conference, Washington, DC, May 2-5, 1985. • D. M. Kalyon and F. Moy, "Blown Film Extrusion of Linear Low Density Polyethylenes: Effects of Alpha-Olefin Comonomers," Society of Plastics Engineers, 43rd Annual Technical Conference, Washington, DC, May 2-5, 1985. • D. M. Kalyon, M. Hallouch and N. Fares, "Recycling of Thermosets as Fillers," Society of Plastics Engineers, 42nd Annual Technical Conference, New Orleans, LA, May 2-5, 1984. • D. M. Kalyon and M. Khemis, "Effects of Slip Additives on the Rheology of LDPE Resins and Ultimate Properties of Blown Films," Society of Plastics Engineers, 42nd Annual Technical Conference, New Orleans, LA, May 1-4, 1984. • D. M. Kalyon and M. Bouazza, "Processing Thermosetting Powders in Continuous Kneaders," Society of Plastics Engineers, 41st Annual Technical Conference, Chicago, IL, May 2-5, 1983. • M. Kamal and D. M. Kalyon, "Microstructure and Ultimate Properties of Extrusion Blow Molded Polyethylene Bottles," International Symposium of International Union of Pure and Applied Chemistry, Athens, Greece, Aug 29-Sep 2, 1982. • M. Kamal, D. M. Kalyon and V. Tan, "Distribution of Thickness and Properties in Blow Molded Polyethylene Bottles," Society of Plastics Engineers, 39th Annual Technical Conference, Boston, MA, May 4-7, 1981. • M. Kamal, D. M. Kalyon and V. Tan, "Melt Deformation during Parison Formation and Inflation in Extrusion Blow Molding," 8th International Congress on Rheology, Naples, Italy, Sep 1-5, 1980. • D. M. Kalyon, M. Kamal and V. Tan, "Experimental Study of the Blow Molding Process," 29th Canadian Chemical Engineering Conference, Sarnia, Canada, Sep 30-Oct 3, 1979. • M. Kamal, D. M. Kalyon and V. Tan, "An Experimental Study of Parison Formation and Inflation in Extrusion Blow Molding," Golden Jubilee Meeting of the Society of Rheology, Boston, MA, Oct 29-Nov 2, 1979. • D. M. Kalyon, V. Tan and M. Kamal, "Dynamics of Parison Development in Blow Molding," Society of Plastics Engineers, 37th Annual Technical Conference, New Orleans, LA, May 7-10, 1979. • M. Kamal, D. M. Kalyon and V. Tan, "An Integrated Approach to Injection Molding Analysis," 47th Annual Meeting of the Society of Rheology, New York, NY, Feb 27-Mar 2, 1977.

50

SEMINARS AND INVITED LECTURES • D. Kalyon, “Rheology, processing, simulation and structure development of highly filled suspensions and nanosuspensions”, Innovation Center of Rogers Corporation, Burlington, MA, April 11, 2017. • D. Kalyon, “Nanocomposites of polymers compounded with carbon nanotubes (CNTs): Effects on viscoelasticity, crystallization, cross-linking and development of ultimate properties”, SPE Palisades Section, Basking Ridge, NJ, Feb. 18, 2016. • D. Kalyon, “Integration of sponsored research into undergraduate education: Challenges and opportunities”, Innovative methods in education symposium, Health and Education Foundation (SEV), Harvard Club, New York City, November 16, 2015. • D. Kalyon, “Rheology, structure formation, mathematical modeling of continuous processing of energetic and ramifications for the development of next-generation of additive manufacturing methods”, Inaugural meeting of the National Energetics consortium, Texas Tech University, Lubbock, Texas, October 13, 2015. • D. Kalyon, “Novel platform for the development, rheological characterization and testing of microgel-based fracturing fluids”, National Science Foundation Hydraulic Fracturing Workshop, University of Arkansas at Little Rock, April 20, 2015. • D. Kalyon, “Application of core competencies of chemical engineering to development of high value added products in multiple industries: Case studies utilizing extrusion of concentrated suspensions”, Keynote lecture, CHEMTECH ’14 Conference organized by DAKAM (Eastern Mediterranean Academic Research Center) and hosted by Yildiz Technical University, Istanbul, October 23, 2014. • D. Kalyon, “Rheology, processing, simulation and structure development of highly filled suspensions and nanosuspensions”, PPG Coatings Innovation Center, Allison Park, PA, May 13, 2014. • D. Kalyon, “Rheology, processing and structure development of polymeric concentrated suspensions and nanosuspensions”, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou, China, April 17, 2014. • D. Kalyon, “Continuous processing of highly filled suspensions: Ramifications on the processing of energetic formulations”, Department of Chemical and Biological Engineering, South Dakota School of Mines and Technology, Rapid City, SD, March 18, 2014. • D. Kalyon, “Twin screw extrusion of concentrated suspensions”, Mylan Technologies, St. Albans, Vermont, December 17, 2013.

51

• D. Kalyon, “Twin screw extrusion of concentrated suspensions”, P&G, Cincinnati, OH, December 10, 2013. • D. Kalyon, “Development of high value added products relying on core competencies”, Uludag University, November 13, 2013. • D. Kalyon, “New polymer processing methods for novel applications of polymers especially in the biomedical area”, Recent Advances in Polymer Science and Technology, Yalova University, October 9, 2013. • D. Kalyon, “Rheology, processing, structure development and ultimate properties of polymer/nanotube nanocomposites”, Benjamin Levich Institute for Physico-Chemical Hydrodynamics, City College of CUNY, New York, NY, February 26, 2013. • D. Kalyon, “Novel graded scaffolds, methods of fabrication and applications for bone tissue engineering”, University of Nebraska- Lincoln, Department of Chemical and Biomolecular Engineering, December 5, 2012. • D. Kalyon, “Extrusion based novel scaffolds and fabrication methods for bioresorbable scaffolds for bone tissue engineering applications, Biomedical Engineering Department, New Jersey Institute of Technology, October 19, 2012. • D. Kalyon, “Technologies associated with processing of highly filled suspensions”, NSWC, Indian Head, Maryland, June 15, 2012. • D. Kalyon, A. Ergun-Butros, S. Ozkan and C. Erisken, “Extrusion based processes for fabrication of bioresorbable scaffolds for tissue engineering applications”, keynote lecture, Polymer Processing Society, PPS-27, Niagara Falls, Canada, May 23, 2012 (Proceedings of PPS Americas conference, Niagara Falls, Canada May 21-24, 2012, pp. 268-269). • D. Kalyon, “Rheology, processing, structure formation and ultimate properties of polyethylene resins”, a short course given to Petroleum Institute and Borouge Inc., Abu Dhabi, UAE, May 9 and 10, 2012. • D. Kalyon, “Rheological behavior of polymeric dispersions”, Bergquist Corporation, Minneapolis, MN, April 4, 2012. • D. Kalyon, “Rheology, processing, structure development and applications of highly filled polymers”, invited lecture, Petroleum Institute, UAE, February 9, 2012. • D. Kalyon, "Integrated approaches to tailoring of novel nanostructured polymers and polymeric composites", invited lecture, Petroleum Institute, UAE, February 8, 2012. • D. M. Kalyon, M. Malik and H. Tang, “Development of flow instabilities during extrusion of polyolefins and filled polyolefins as affected by pressure dependent slip at the wall”, MACROMEX

52

2011-2nd Binational meeting on Advances in Polymer Science”, Riviera Maya, Q. Roo, Dec. 7, 2011 (invited paper). • D. Kalyon, “Processing of highly filled suspensions”, Duracell Corporation, Bethel, CT, November 7, 2011. • D. Kalyon, “Twin screw extrusion of complex fluids- challenges and opportunities”, Keynote presentation, SPE Annual Technical Conference, Boston, MA, May 2, 2011. • D. Kalyon, "Rheology, Processing and Structure Development of Concentrated Suspensions and Nanosuspensions", Invited presentation, Society of Plastics Engineers, Palisades Section, Iselin, New Jersey, January 20, 2011. • D. Kalyon, “Novel biodegradable scaffolds for tissue engineering and methods of fabrication: Applications to bone tissue engineering”, Seminar at Johns Hopkins Medical School, Rangos Bldg, Baltimore, MD, 1-2 pm, November 29, 2010. • D. Kalyon, “Wall slip of complex fluids: Ramifications for rheology and processing”, Key note presentation, Polymer Processing Society, PPS-26, Istanbul, Turkey, October 20, 2010. • D. Kalyon, “Rheology, processing and structure development of concentrated suspensions and nanosuspensions”, Chemical, Biological and Pharmaceutical Engineering Department of New Jersey Institute of Technology, Newark, NJ, September 13, 2010. • D. Kalyon, “Rheology, Simulation and Process Development of Complex Fluids”, invited lecture at Corning Inc., Corning, NY, August 6, 2010. • D. Kalyon, “A Retrospective on the Development of the Science and Technology Base for the Continuous Processing of Energetics: Accomplishments, Capabilities and Weaknesses”, 16th JOCG Extruder and Continuous Mixer Users Group, Indian Head, MD, July 21, 2010. • D. Kalyon, H. Tang and M. Malik, “Development of flow instabilities during extrusion of polymer melts and polymeric suspensions: Importance of the use of pressure-dependent wall slip condition”, Key note presentation, Polymer Processing Society Annual Meeting, Banff, Alberta, Canada, July 7, 2010. • D. Kalyon, “Application of core competencies of chemical engineering to multiple industries- Case studies utilizing extrusion of concentrated suspensions”, Plenary lecture, Ninth National Chemical Engineering Congress, Ankara, Turkey, June 22, 2010. • D. Kalyon, “Novel graded scaffolds, methods of fabrication and applications for bone tissue engineering”, Koc University, Istanbul, Turkey, on June 17, 2010. • D. Kalyon, “Challenges of continuous processing of highly filled suspensions”, invited lecture at PPG Corporation, Barberton, Ohio, on May 26, 2010.

53

• D. Kalyon, “Dynamics of Continuous Mixing of Concentrated Suspensions”, invited lecture at Bergquist Corporation, Minneapolis, MN, on March 6, 2010. • D. Kalyon, “Characterization, simulation and structure development in processing of concentrated suspensions”, Presentation at LifeTek Solutions and Orthovita Inc., Malvern, PA, on July 17, 2009. • D. Kalyon, "Rheology and processing of particle-loaded complex fluids at particle concentrations that approach the maximum packing fraction", Thomas Baron Award Lecture, American Institute of Chemical Engineers Centennial National Meeting, Philadelphia, PA, November, 18, 2008. • D. Kalyon, "Overview of the capabilities of the Highly Filled Materials Institute at Stevens- contributions to the science base of energetics materials", invited presentation at the 15th Joint Ordnance Commanders Group Meeting (JOCG-CMEUG), Rockaway, NJ, October 22, 2008. • D. Kalyon, "Extrusion of concentrated polymeric suspensions and other complex fluids: Wall slip and ramifications of development of flow instabilities", New Jersey Institute of Technology, Otto H. York Department of Chemical, Biological and Pharmaceutical Engineering, Newark, NJ, September 29, 2008. • D. Kalyon, "Wall slip and ramifications in processing and rheology of polymers and other complex fluids", SPE Research Award Lecture, SPE ANTEC, Milwaukee, Wisconsin, May 5, 2008. • D. M. Kalyon, “Continuous processing and shaping of energetic materials: Challenges with viscoplasticity, migration effects and wall slip”, Texas Tech University Chemical Engineering Department Seminar Series: New frontiers in chemical engineering: Excellence in graduate research and education, Lubbock, Texas, September 14, 2007. • D. Kalyon, “Rheology and processing of highly filled suspensions”, invited lecture, Merck Company, West Point, PA, January 11, 2007. • D. Kalyon, “Challenges associated with the processing of concentrated suspensions”, invited lecture, Bergquist Company, St. Paul, Minnesota, July 27, 2006. • D. Kalyon and S. Prickett, “Rheological characterization of Gun Propellant Formulations for Co-Extrusion Applications”, Joint Army, Navy, NASA, Air Force Workshop on Challenges for Fast-Core/Layered gun Propellants Joint Workshop”, Aberdeen Proving Ground, Maryland, May 11, 2006. • D. Kalyon, “Issues, Challenges and Opportunities in Co-Extrusion Technologies”, Joint Army, Navy, NASA, Air Force Workshop on Challenges for Fast-Core/Layered gun Propellants Joint Workshop”, Aberdeen Proving Ground, Maryland, May 11, 2006. • D. Kalyon, “Rheology and processing of polymer melts and polymeric suspensions with high degrees of solid fill”, PolyOne Corporation, Avon Lake, Ohio, December 14, 2005.

54

• D. Kalyon, “Rheology and processing of highly filled suspensions with applications to thermal pastes used in integrated circuits”, IBM Microelectronics Division at Hopewell Junction, New York, April 22, 2005. • D. Kalyon, “Technologies for the processing of highly filled materials under optimum geometry and operating conditions”, National Research Council-Integrated Manufacturing Technologies Institute, London, Ontario, Canada, October 25, 2004. • D. Kalyon, “Time-dependent development of instabilities during the flow of polymer melts and polymeric suspensions”, Fall 04 Seminar Series of Department of Chemical, Biomedical and materials Engineering of Stevens, October 6, 2004. • D. Kalyon, “Rheology, Structure Formation and Processing of Highly Filled Suspensions”, presentation at Purification Cellutions, Waynesboro, Georgia, October 4, 2004. • D. Kalyon, “Rheology and Processing of Energetic Materials”, EXPRO TEC presentation, Valleyfield, Quebec, Canada, September 14, 2004. • D. Kalyon, “Rheology of concentrated suspensions”, Corning Incorporated seminar, Corning, New York, June 26, 2003. • D. Kalyon, “Development of wall slip and flow instabilities”, University of Akron, M. R. Kamal Symposium, April 25, 2003. • D. Kalyon, “Rheology and processing of highly filled suspensions”, Levich Institute seminar, March 18, 2003. • D. Kalyon and J. B. Graybill, “Enabling technologies for the processing of nanocomposites and nanoenergetics”, US Army TACOM ARDEC Nano Valley Kickoff Meeting, Mt. Arlington, NJ, October 25, 2002. • D. Kalyon, “Rheology and Extrusion of Highly Filled Polymeric Suspensions”, Massachusetts Institute of Technology, Program in Polymer Science and Technology Seminar, October 31, 2001. • D. Kalyon, “ Twin screw extrusion of thermosetting formulations for encapsulation applications in electronics”, Henkel-Loctite Corporation, Olean, NY, April 26, 2002. • D. Kalyon, “Mathematical Modeling of Processing Flows using 3-D Finite Element Method”, Naval Surface Warfare Center, Indian Head Division, May 16, 2002. • D. Kalyon, “Extrusion of Pastes and Soft Solids”, 2001 IFPRI Annual General Meeting, Gainesville, Florida, July 11, 2001. • D. Kalyon, “Possibilities in Nano-energetics”, Workshop of US Army on Nano Technology Strategy, Picatinny Arsenal, NJ October 26, 2000.

55

• D. Kalyon, “ Rheology and Processing of Highly Filled Suspensions”, Duracell Bethel Corporate Facility, November 2, 2000. • D. Kalyon, "Extrusion of Pastes and Soft Solids”, 2000 IFPRI Annual General Meeting, Scheveningen, Den Haag, The Netherlands, July 11, 2000. • D. Kalyon, “Improvement of Extrusion Process efficiency”, Dexter Electronic Materials, Olean, NY, June 12, 2000. • D. M. Kalyon, “Structure and Processing of Highly Filled Materials”, Eugenie Lamothe Colloquium Series, Department of Chemical Engineering of McGill University, January 24, 2000. • D. Kalyon, “Rheology, Structure development/Characterization and the Simulation of the Extrusion Processing of Highly Filled Materials”, Duracell-Gillette Company, Needham, Massachusetts, January 10, 2000. • D. Kalyon, “Simulation of the Extrusion of Soap Formulations”, Unilever Edgewater Research and Development, Edgewater, NJ November 29, 1999. • D. M. Kalyon, “Mathematical Modeling of the Continuous Processing of Highly Filled materials, Seminar Series in Applied Mathematics, Department of Mathematical Sciences at Stevens Institute of Technology, December 6, 1999. • D. M. Kalyon, “Viscoelasticity of ink formulations and Ramifications on Misting of uv-curable inks”, Sun Chemical, Carlstadt, NJ, October 29, 1999. • D. M. Kalyon, “Processing of Highly Filled Materials and applications to co-extruded permanent magnets”, Delphi Automotive Systems, Saginaw, Michigan, Sept. 24, 1999. • D. Kalyon, “New concepts in casting of rocket fuels”, Naval Surface Warfare Center, Indian Head, Maryland, Sept. 21, 1999. • D. Kalyon, “Continuous Processing of Highly Filled Materials: Possible applications to processing of pulp and paper waste products”, Marcal Paper Mills Inc. Elmwood Park, NJ, Aug. 11, 1999. • D. M. Kalyon,” Recent developments in mathematical modeling and characterization of the structure of energetic materials”, Naval Surface Warfare Center, Indian Head, Maryland, June 25, 1999. • D. M. Kalyon, “Extrusion of pastes”, IFPRI annual meeting, New Brunswick, NJ, June 8, 1999. • D. M. Kalyon, “Rheology and Extrusion of bar soaps”, Unilever Research Center, Edgewater, NJ, January 7, 1999. • D. M. Kalyon, “Continuous processing of energetic materials”, Briefing given to Congressman R. Frelinghuysen, Picatinny Arsenal US Army Base, Dec. 10, 1998.

56

• D. M. Kalyon, “Twin screw extrusion based recycling of Al powders”, Toyal America, November 9, 1998. • D. M. Kalyon, “A new squeeze flow rheometer for on-line quality control of gun propellants”, Alliant TechSystems, August 14, 1998. • D. M. Kalyon, “Crystallization of CL-20”, Picatinny Arsenal US Army Base, Dover, NJ, May 26, 1998. • D. M. Kalyon, “Structure development in suspensions with silica fillers”, PPG Corporation, Pittsburgh, PA, March 31, 1998. • D. M. Kalyon, “Extrusion Processing of Highly Filled Materials”, SPARK International Workshop of Unilever on Product Structure-Soft Solids and Liquids, November 7, 1997, Tenafly, New Jersey. • D. M. Kalyon (invited) "Integrated Simulation and Microstructural Tools for Continuous Processing of Composite Energetics," Workshop on the Intelligent Processing and Inspection of Polymer Composite Materials, sponsored by U.S. Army Research Laboratory, Baltimore, MD, August 26, 1997. • D. Kalyon, “Rheology and Extrusion of PAX IIA Formulation and Solvent Migration Effects”, Workshop of Totally Integrated Manufacturing Enterprise sponsored by the US Army, Thiokol Corporation, Brigham City, Utah, January 6 (1998). • D. M. Kalyon " Recovery, Recycle and Reuse of Thermoplastic Elastomer based Propellants and Explosives", Green Energetic Materials (GEM) Technical Information Product Team Workshop, Arlington, Virginia, February, 4, 5 (1997) • D. M. Kalyon " Integrated Simulation and Experimental Methods for the Continuous Processing of Composite Propellants", invited lecture, Workshop on the Intelligent Processing and Inspection of Polymer Composite Materials", Baltimore, Maryland August, 26, 27 (1997) • D. M. Kalyon, "Characterization of Poly(BAMO/AMMO)", Thermoplastic Elastomer (TPE) Processing Workshop at JANNAF Propellant Development Subcommittee Meeting, NASA AMES Center, Sunnyvale, California, 17 March, (1997) • D. M. Kalyon, " Progress in Dissolution Studies," Thermoplastic Elastomer (TPE) Processing Workshop at JANNAF Propellant Development Subcommittee Meeting, NASA AMES Center, Sunnyvale, California, 17 March (1997) • D. M. Kalyon Invited Lecture, "Soft Solids Processing", International Conference sponsored by Chemical Engineering Science and Unilever, " Putting Structure into Chemical Engineering", Port Sunlight, Chester United Kingdom, November 8,9 (1996) • D. M. Kalyon, “Batch and Continuous Processing of Energetics”, Alliant Tech Corporation seminar, Radford, VA, August 28, 1996.

57

• D. M. Kalyon, “Extrusion Flows and Microstructure Development of Dispersions and Suspensions”, Lever Brothers Seminar, Edgewater, NJ, June 18, 1996. • D. M. Kalyon, “Mathematical Modeling of Manufacturing Operations of Energetics”, Strategic Analysis Corporation Workshop sponsored by BMDO/IST, Arlington, VA, June 14, 1996. • D. M. Kalyon, "Rheology and Continuous Processing of Highly Filled Materials," Bogazici University, Dept. of Chemical Eng., Istanbul, Turkey, June 5, 1996. • D. M. Kalyon "Compounding of Extrusion of Highly Filled Systems in Twin Screw Extruders," Koç University, Chemistry Dept., Istanbul, Turkey, May 28, 1996. • D. M. Kalyon, "Highly Filled Materials: Characterization Processing, Microstructure Development," Special Chem. Eng. Seminar at Middle East Technical University Ankara, Turkey, May 27, 1996. • D. M. Kalyon, “Rheology and Continuous Processing of highly Filled Suspensions”, Hoechst Celanese, R. L. Mitchell Technical Center, April 11, 1996. • D. M. Kalyon, “Rheology and Processability of Concentrated Suspensions with Colloidal Particles”, PPG Corporation seminar, Pittsburgh, PA, March 11, 1996. • D. Kalyon, "Processing and Microstructural Distributions of Highly Filled Materials," Material Science and Engineering Dept. at Stevens Institute of Technology, Hoboken, NJ, March 6, 1996. • D. Kalyon, "Rheology and Continuous Processing of Highly Filled Suspensions," Procter and Gamble Corporation Seminar, Cincinnati, OH, Dec.12, 1995. • D. Kalyon, "Simulation of the Continuous Processing of Propellants and Explosives," Joint Ordnance Commanders Explosives and Propellants Subgroup, Picatinny Arsenal Army Base, NJ, Nov. 7, 1995. • D. M. Kalyon, "Rheology and Simulation of Continuous Processing Flows of Highly Filled Suspensions," Massachusetts Institute of Technology, Fluid Dynamics Seminar, June 3, 1993. • D. M. Kalyon, "Rheology and Continuous Processing of Concentrated Suspensions," Process Engineering and Chemistry Lab Seminar Series of General Electric Research and Development, Schenectady, New York, July 2, 1992. • D. M. Kalyon, "Rheology of Concentrated Suspensions," Industrial Materials Institute of National Research Council of Canada, Boucherville, Quebec, July 3, 1992. • D. M. Kalyon, "Incorporation of Wall Slip in Non-isothermal Modeling of Single Screw Extrusion Processing," First International Conference on Transport Phenomena in Processing, Honolulu, Hawaii, March 22-26, 1992.

58

• D. M. Kalyon, "Simulation and Experimental Studies of Continuous Processing in Twin Screw Extruders," SDIO/IST, ONR Workshop, 1991. • D. M. Kalyon, U. Yilmazer and B. Aral, "Rheological Behavior of Highly Filled Suspensions," 24th Middle Atlantic Regional Meeting of American Chemical Society, Farleigh Dickinson University, Florham Park/Madison, NJ, May 23-25, 1990. • D. M. Kalyon, "Blow Molding of Polyethylenes," Invited Seminar, Mobil Chemical Company, Edison, NJ, June 20, 1990. • H. Yao, S. Kovenklioglu and D. M. Kalyon, "Conversion of Polymeric Precursors into Ceramics: Pore Formation," TSM The VI Northeast Regional Symposium High Performance Composites for the 1990's, Morristown, NJ, June 6-8, 1990. • D. M. Kalyon, "Processing, Rheology and Dynamic Testing of Elastomers," Workshop A, 6th Annual Conference of Engineering Design with Elastomers at Stevens, Hoboken, NJ, August 22, 1990. • D. M. Kalyon, "Fundamentals of the Processing and the Rheology of Elastomers," 6th Annual Conference of Engineering Design with Elastomers at Stevens, Hoboken, NJ, August 20, 1990. • D. M. Kalyon, "New Developments in Rheological Characterization and Behavior of Highly Filled Suspensions," SDIO Workshop at Lockheed Missiles and Space, Palo Alto, CA March 12-13, 1990. • D. M. Kalyon, "Product Performance Through Rheology: A Short Course in Solving Materials Problems," invited lecturer, Cherry Hill, NJ, April 17, 1990. • D. M. Kalyon, "Continuous Processing of Highly Filled Suspensions," Mobil Corporation, Edison, NJ, June 20, 1990. • D. M. Kalyon, "Experimental Studies and Simulation of Continuous Processing of Concentrated Suspensions," SDIO/IST Advanced Propellants ONR Workshop, July 24-26, 1990. • D. M. Kalyon, "Product Performance Through Rheology: A Short Course in Solving Materials Problems," invited lecturer, Chantilly, Virginia, April 19, 1990. • D. M. Kalyon, "Simulation and Experimental Studies of Continuous Processing of Energetics," Invited Lecture, Third Continuous Mixer and Extruder Users Group Meeting, Indian Head, MD, Dec. 5-7, 1989. • D. M. Kalyon, "Microstructure Development in Injection Molding of Amorphous Engineering Plastics," Invited Chemical Engineering Seminar, State University of New York, Buffalo, NY, Feb 1, 1989.

59

• D. M. Kalyon, "Behavior of Highly Filled suspensions in Viscometric and Processing Flows," Invited Lecture, Polymer Division of National Institute of Standards and Technology, Gaithersburg, Maryland, Jan 13, 1989. • D. M. Kalyon, "Rheology and Processability of Highly Filled Suspensions," Invited Lecture, The 1989 International Chemical Congress of Pacific Basin Societies_Pacifichem '89, Honolulu, Hawaii, Dec 19, 1989. • D. M. Kalyon, "Experimental Studies and Simulation of Continuous Processing of Highly Filled Suspensions in Co-rotating Twin Screw Extruders," Invited Lecture, Third Annual Continuous Mixer and Extruder Users' Group (Naval Ordnance Station), Indian Head, Maryland, Dec 6, 1989. • D. M. Kalyon, "Experimental Studies and Simulation of Mixing of Highly Filled Suspensions," Invited Seminar, Mechanical Engineering Department of Stevens Institute of Technology, Hoboken, NJ, March 29, 1989. • D. M. Kalyon, "Simulation and Experimental Research on Continuous Processing of Highly Filled Materials at Stevens," Picatinny Arsenal Army Base, June 7, 1989. • D. M. Kalyon, "Rheology, Simulation and Continuous Processing Studies of Highly Filled Materials," United Technologies Corporation, San Jose, CA, May 8, 1989. • D. M. Kalyon, "Continuous Processing of Highly Filled Materials using extrusion technologies," Aerojet Corporation, Sacramento, CA, May 10, 1989. • D. M. Kalyon, "Product Performance through Rheology," Rheometrics sponsored lecture, Monroeville, PA, May 18, 1989. • D. M. Kalyon, "Processing of Propellants in Co-rotating Twin Screw Extruders," SDIO/IST Workshop, July 10-11, 1989. • D. M. Kalyon, "Experimental Studies and Simulation of Mixing in Co-rotating Twin Screw Extruders," Chemical Engineering Department Seminar at Florida Institute of Technology, Melbourne, FL, May 13, 1988. • D. M. Kalyon, "Analyzing the Blow Molding Process," E. I. Dupont de Nemours Fabrication Technologies Technical Conference, Scanticon Conference Center, Princeton, NJ, May 18, 1988. • D. M. Kalyon, "Experimental Studies and Simulation of Mixing of Highly Filled Suspensions in Twin Screw Extruders," GE Corporate Research and Development, Schenectady, NY, Dec 12, 1988. • D. M. Kalyon, "Simulation of Mixing in Co-rotating Twin Screw Extrusion Processes," Invited Lecture, Second continuous Mixer and Extruder Users Group Meeting (Sponsored by US Army and NOS), Radford, VA, Dec 8, 1988.

60

• D. M. Kalyon, "Continuous Processing of Solid Rocket Fuels with Twin Screw Extruders," SDIO, Innovative Science and Technology Office Workshop on Continuous Processing Science, Chestertown, Maryland, Aug 30-Sep 1, 1988. • D. M. Kalyon, "Simulation of the Continuous Processing of Propellants in the Twin Screw Extrusion Process," Department of Navy, Propulsion Technology, Panel W4, Technical Cooperation Program, MIT, Cambridge, Mass., Mar 3, 1987. • D. M. Kalyon, "Rheology of Highly Filled Propellants," Department of the Army: Continuous Mixer and Extruder Users Groups Meeting, NSWC, White Oak, Nov 30, 1987. • D. M. Kalyon, "Mixing in Twin Screw Extruders: Simulation and Experimental Studies," Department Seminar at the Department of Chemical and Mechanical Engineering, University of South Florida, Tampa, FL, Nov 20, 1987. • D. M. Kalyon, "Rheology and Injection Molding of Engineering Plastics," GE Corporation, Selkirk, Oct 23, 1987. • D. M. Kalyon, "Mixing of Propellants in Continuous Twin Screw Extruders," Invited Lecture, Office of Naval Research Propellant Processing Workshop, Chestertown, Maryland, Aug 25-26, 1987. • D. M. Kalyon, "Drag Flow Principles and Drag Flow Equipment Review," Hilton Head, SC, May 12, 1986. • D. M. Kalyon, "Microstructure Development in Injection Molding," GE Corporation, Pittsfield, Mass., May 14, 1986. • D. M. Kalyon, "Processing of Polymeric Precursors for Ceramic Applications," National Science Foundation Workshop on Processing of Polymers, University of Akron, Akron, OH, June 13, 1986. • D. M. Kalyon, "Fundamentals and Current Technology of Blow Molding," Plastech, Atlantic City, NJ, June 17, 1986. • D. M. Kalyon, "Co-rotating Twin Screw Extrusion Principles," Lecture, Office of Naval Research Workshop on Propellant Processing, University of Maryland, May 12, 1985. • D. M. Kalyon, "Use of Fillers in Plastics Industries," Union Camp Corporation, May 12, 1985. • D. M. Kalyon, “Polymerization of ethylene in a high pressure reactor: mathematical modeling and experimental studies”, Department of Chemistry and Chemical Engineering at Stevens Institute of Technology, Hoboken, NJ, May 1, 1984. • D. M. Kalyon, "Dynamics of High Pressure Low Density Polyethylene Tubular Reactor," Chemical Engineering Department of McGill University, Montreal, Canada, May 4, 1984.