pstvs04 - images-na.ssl-images-amazon.com · (m26x25 bolt) under o. turn y (plastic cover) and p...
TRANSCRIPT
V3.0
PSTVS04
Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us. Telephone:800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)Email:[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
1
V1.0
Connecting the Support Pillar to Tempered GlassStep 1
Pillar
x4
x
x
x
x
x
x3
2
Connecting the TV Plate to Support PillarStep 2
pillar
Put O (Tempered Glass) on the table. Put R (Metal Pad) and L (M26x25 Bolt) under O. Turn Y (Plastic Cover) and P (Support Pillar) upside down under O to install and then tighten screws.
If you find the support column (P) is not in the correct direction, please see figure 1.1 below. Loosen M6x25 screws(L), adjust the support to the correct direction then tighten screws again.
R
Y
O
L R
3
Measure VESA and Check TV screws
Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectangle) and check that these taken measures are within the VESA (*) range for this wall mount. (*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatible with wall mounts.
Please select the proper screw length for your TV by hand tightening to check your flat panel thread depth.
Step 3
4
Mounting the Monitor Bracket to a TVStep 4
5
Insert the safety lock in the bottom of the bracket and then tighten the screws.
5
5
5.3
5.4
Attaching TV to TV Plate and Mananging the WiresStep 5