ps series - versa · pdf file12345 10 2030405075 100 125150 200 ... flange dimensions in...
TRANSCRIPT
ISO 9001-2008
LPG Industry
Ship Yards
Petrochemical Industry Chemical Industry
Oil Industry
Pharmacautical Industry
Sectors
�
�
�
�
�
�
�
�
�
Self- priming
High pressure at low capasity
Liquefied gas handling
High resistant materials
Performance curve characteristic
High efficiency
Low NPSH value
Modular hydraulic system
Ability to pump vapour laden
liquides (up to 50%)
VERSA pump is a self-priming side channel pump capable of handling gas
along with the medium and operates at a low noise level. PS pumps are used for
problem-free pumping of clean liquids at unfavourable suction side conditions.
They are also very suitable for positive suction heads below 0,5m. PS pumps
provide the most appropriate solutions for liquefied gases, liquids under vapour
pressure, refrigerants and especially PS applications.
Side channel designs fill the hydraulic performance void between positive
displacement pumps and centrifugal pumps. Fully open ìstarî impellers interact
with the side channel casing creating an intense transfer of energy to the pumped
liquid or liquid / gas mixture. The corresponding pressure increase (pump head)
equals 5 to 10 times the amount generated by a similar size centrifugal pump at
the same RPM.
PSD MODEL
PSC MODEL
PSV MODEL
Features : Technical Data :
3Capasity: 0.5 - 35 m/h
Head: max. 35 bar
Casing pressure: max. 40 bar
Speed: max. 1750 d/d (60 Hz)
Working temperature: max. 220C
Flange connections: DIN2501 - ANSI 150 & 300 / PN40
The solution for critical conditionsThe solution for critical conditionsThe solution for critical conditions
Side Channel Pumps
The design of the side channel pump allows for the transfer of liquid-gas mixture with up to 50% vapor; therefore
eliminating possible air or vapor locking that can occur in other pump designs. A special suction impeller lowers the
NPSH requirement for the pump.
The side-channel pump design is similar to a regenerative turbine in that the impeller makes regenerative passes
through the liquid. However, the actual design of the impeller and casing as well as the principles of operation differ
greatly. The side-channel pump has a channel only in the discharge stage casing (A) and a flat surface which is flush with
the impeller on the suction stage casing (B). A star-shaped impeller (C) is keyed to the shaft and is axially balanced
through equalization holes (D) in the hub of the impeller.
The liquid or liquid/vapor mixture enters each stage of the pump through the inlet port (E). Once the pump is initially
filled with liquid, the pump will provide a siphoning effect at the inlet port. The effect is similar to what happens in water
ring pumps. The water remaining in the pump casing forms a type of water ring with a free surface. A venturi effect is
created by the rotation of the impeller and the free surface of the water, thus pulling the liquid into the casing.
After the liquid is pulled through the inlet port, it is forced to the outer periphery of the impeller blade by centrifugal
action. It is through this centrifugal action that the liquid is accelerated and forced into the side channel. The liquid then
flows along the semicircular contour of the side channel from the outermost point to the innermost point until once
again it is accelerated by the impeller blade.
F
GH C
D E
A
Vapor Liquid
Vapor andLiquidMixture
Principle of Side Channel Operation
B
A
B
C
D
E
F
G
H
Item Description
Discharge Casing
Suction Casing
Vane Wheel Impeller
Equalization Holes
Liquid Inlet
Liquid Outlet
Mini Channel
Vapor Balance Outlet
Working Principle of Pump
1 2 3 4 5 10 20 30 40 50 75 100
125
150
200
Performance Curves
350
300
250
200
150
100
50
0.1 .2 .3 .4 .5 .6 .7.8.91.0 2 3 4 5 6 7 8 910 20 30 40 50 6070
H(f
t)
H(m
)
1 2 3 4 5 10 20 30 40 50 75 100
125
150
200
350
300
250
200
150
100
50
1200
1100
1000
900
800
700
600
500
400
300
200
100
10
00
20
00
30
00
40
00
50
00
60
00
GPM
H(f
t)
H(m
)
10
00
20
00
30
00
GPM
40
00
50
00
60
00
1200
1100
1000
900
800
700
600
500
400
300
200
100
0.1 .2 .3 .4 .5 .6 .7.8.91.0 2 3 4 5 6 7 8 910 20 30 40 50 6070
PS Series
ANSI 150 & 300 Flange / DIN EN 1092 & DIN 2501 PN40 Flange
SERIES
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8
1000 2000 3000 4000 5000 6000
Number of Stages
Inlet Flange
Outlet Flange
Inlet - Outlet Flanges for PSD & PSV
Speed (50 Hz) / Speed (60Hz)
Maximum Working Pressure, Bar
Differantial Range Head ft [m]
Minimum Temperature °C (°F)
Maximum Temperature °C (°F)
NPSH ft (m)
Maximum Viscosity cSt (SSU)
Maximum Proportion of
Gas Allowable
50 (15) 690 (210)- 65 (20) 1050 (320)- 30 (10) 820 (250)- 30 (10) 805 (245)- 30 (10) 950 (290)- 30 (10) 1150 (350)-
1½ (DN40) 2½ (DN65) 2½ (DN65) 3 (DN80) 4 (DN100) 4 (DN100)
¾ (DN20) 1 (DN32)¼ 1¼ (DN32) 1½ (DN40) 2 (DN50) 2½ (DN65)
¾ (DN20) 1¼ (DN32) 1¼ (DN32) 1½ (DN40) 2 (DN50) 2½ (DN65)
1450 / 1750
35 Bar (510)
-40° (-40°)
220° (430°)
230 (1050)
50 %
1.6 (.5) 13 (4)- 2 (.6) 3.3 (1)- 1.6 (.5) 6.6 (2)- 1.3 (.4) 8.2 (2.5)- 1.3 (.4) 12 (3.5)- 4.6 (1.4) 8.2 (2.5)-
Connection Norms
GG25 (Cast Iron) / GGG50 (Ductile Iron) / GSC25N (Steel) / AISI 316 (Stainless Steel)Casing Material Options
Alloyed Bronze / Bronze RG7 / AISI 316 Stainless SteelImpeller Material Options
Mechanical seal / Cartridge Mechanical seal / Cartridge double Mechanical seal / Packing glandShaft Sealing Options
1450 rpm (1750 rpm / 60Hz)Pump rpm
3 3Max: 35 m /h (42 m /h / 60Hz)Capacity
Likquid Sensor (Liquid Level Switch) / Collector / Reducer / Exproof Coupling / By-Pass ValveAccessories
SIC-Car-Viton / SIC-SIC-Kalrez / SIC-SIC-TeflonMechanical Seal Material Options
3M /hr 1450 d/d (50 Hz) 3M /hr 1750 d/d (60 Hz)
Pump Models and Technical Spesifications
Side Channel Pumps - type PSC
Pumps of the series PSC are horizontal and self-priming, side channel pumps with
a NPSH inducer stage suitable for handling liquids which do not contain solid or
abrasive matter. The NPSH inducer stage allows the pump to operate on the suction
side under unfavourable conditions and at positive suction heads lower than 0.5 m.
The range comprises of six sizes each with 1 to 8 hydraulic stages whereby an
optimum rating is obtained, ensuring the pump selected meets the required
capacity and head.
The different material possibilities with uniform dimensions and performance
characteristics as well as the standard exchangeable components, coupling with
mechanical seal, packing gland and cartridge seal make the PSC particularly
recommendable.
The pumps of the PSC /LS series have a retaining stage to avoid the dry running by
controlling the liquid level in the pump. This design is especially developed for the
handling of liquids under vapour pressure or when pumping from underground tanks.
PSC 1000 - 6000
INLET
OUTLET
Model: PSC (With Cartridge Mechanical Seal)
Model: PSC (With Mechanical Seal)
Model: PSC (With Liquid Sensor)
Model: PSC (With Packing Gland)
This impeller allows PSC Pumpsto handle NPSH requirements of
less than 0,5 meter.
Sealing options available are Packing Gland,
Mechanical Seal or Cartridge Seal.
Flanges options available are
DIN and ANSI 150 & 300 norms.
Side Channel allows for greater pressure generation per stage
over normal centrifugal pump of the same size and speed
PSC Model Pumps
PSC ModelDimensional Drawing of Bare Shaft Pump
E
F
J
H
B
C
DG
OUTLET
INL
ET
KL
S
ÿ Zÿ Yÿ X
ÿ V
ÿ T
ÿ U
R
B2
B1
B3
PNM
Flange dimensions in accordance with PN40 DIN 2545 at standard pumps. (upon request ANSI 150&300 norm)
20
32
32
40
50
65
40
65
65
80
100
100
1000
2000
3000
4000
5000
6000
170
200
200
195
237
262
25
40
40
45
50
65
114
134
134
140
160
172
45
60
60
65
65
70
45
50
50
55
60
60
45
53
53
63
68
70
12
14
14
14
16
16
100
112
112
132
160
180
100
135
135
140
165
180
142
180
180
200
220
255
105
135
135
155
170
195
60
110
110
120
120
145
150
185
185
200
235
235
110
145
145
160
190
190
105
140
140
150
165
185
75
100
100
110
125
145
14x4
18x4
18x4
18x4
18x4
18x8
5
6
6
8
8
10
18.2
21.5
21.5
27.0
31.0
35.5
16
19
19
24
28
32
14
16
16
16
18
18
18x4
18x8
18x8
18x8
22x8
22x8
Dimensions [mm]
Pu
mp
In
let
Pu
mp
Siz
e
Pu
mp
Ou
tle
t
D G H RLK M N P T U V X Y Z B1A B C B2 B3S
KgE F J Kg Kg Kg Kg Kg Kg KgE E E E E E EF F F F F F FJ J J J J J J
Number of Stage
1 6 7 82 3 4 5
Dimensions and Weights According to Stage Numbers
1000
2000
3000
4000
5000
6000
365
415
415
463
542
600
399
455
455
518
617
688
206
228
228
260
315
358
195
213
213
268
305
338
20
33
33
46
69
99
22
36
36
53
80
115
24
39
39
60
91
131
26
42
42
67
102
147
28
45
45
74
113
163
30
48
48
81
124
179
32
51
51
88
135
195
34
54
54
95
146
211
240
268
268
315
390
441
274
308
308
370
465
529
229
253
253
323
380
426
433
495
495
573
692
776
263
293
293
378
455
514
308
348
348
425
540
617
467
535
535
628
767
864
297
333
333
433
530
602
342
388
388
480
615
705
501
575
575
683
842
952
331
373
373
488
605
690
376
428
428
535
690
793
535
615
615
738
917
1040
365
413
413
543
680
778
410
468
468
590
765
881
569
655
655
793
992
1128
399
453
453
598
755
866
444
508
508
645
840
969
603
695
695
848
1067
1216
433
493
493
653
830
954
Pu
mp
Siz
e
Dimensional Drawing
1120
9110
9120
9130
9502
0241 0242
1160
1150
2810 9501
1130
4440
9170
1280
4140
9870
7210
9500
2200
7220
4145
7230
3320
1195
2815
9140
24601170
2410
2490
Impeller Bushing
Vane Impeller Bushing
Suction Casing
Discharge Casing
Suction Body
Discharge Body
Impeller Body
Mechanical Seal Casing
Bearing Casing
Shaft
Impeller
Vane Impeller
Hexagonal Shaft Nut (Left-Hand Thread)
Stage O-Ring
Mechanical Seal Casing O-Ring
Ball Bearing
Lip Seal (Inner)
Lip Seal (Outer)
Mechanical Seal
Snap Ring for Shaft
Snap Ring for Bearing
Snap Ring for Lip Seal
2460
2490
2810
2815
3320
4140
4145
4440
7210
7220
7230
Tie Bolt
Tie Bolt Nut
Tie Bolt Washer
Screw for Bearing Casing
Screw for Mechanical Seal Casing
Flat Key for Coupling
Flat Key for Vane Impeller
Flat Key for Impeller
Grease Fitting
9110
9120
9130
9140
9170
9500
9501
9502
9870
0241
0242
1120
1130
1150
1160
1170
1195
1280
2200
2410
ParÁa AdıPart List Part List Part ListItem Item Item
PSC ModelSpare Part List of Pump with Mechanical Seal
Spare Part List
PSC 2001-2008 Sizes Performance CurvesPSC 1001-1008 Sizes Performance Curves
1)2)
1 Stage pump can not be ordered with liquid sensor.8 Stage pump with liquid sensor is produced upon request
2007
2008 2)
2006
2005
2004
2003
2002
20011)
0
1
2
P(kW)
0
200
100
H(m)
3001450 rpm
0
0,2
3)NPSH(m)
1 2 3 Q3(m /h)
4 5
20011)
2002
2003
2004
2005
2006
2007
2008 2)
1 2 3 4 5
1 2 3 4 5
3
4
5
6
7
50
150
250
1007
1008 2)
100610051004
1003
1002
10011)
10011)
1002
1003
1004
1005
1006
1007
1008 2)
0
1
2
1.5
0.5
3
P(kW)
0
100
50
H(m)
150
200 1450 rpm
0
0,2
0,4
0,6
3)NPSH(m)
0 1 2 30,5 1,5 2,5Q3(m /h)
0
0
1
1
2
2
3
3
0,5
0,5
1,5
1,5
2,5
2,5
Performance Curves
1)2)
1 Stage pump can not be ordered with liquid sensor.8 Stage pump with liquid sensor is produced upon request
PSC 4001-4008 Sizes Performance CurvesPSC 3001-3008 Sizes Performance Curves
3008 2)30073006
3005
3004
3003
3002
3001 1)
3008 2)30073006
3005
3004
3003
3002
3001 1)
50
150
4007
4008 2)
4006
4005
4004
4003
4002
40011)
0
2
P(kW)
0
200
100
H(m) 1450 rpm
0
0,5
3)NPSH(m)
6 Q3(m /h)
40011)
4002
4003
4004
4005
4006
4007
4
6
8
10
12
7 8 9 10 11 12 13
150
50
6 7 8 9 10 11 12 13
6 7 8 9 10 11 12 13
4008 2)
Performance Curves
PSC 6001-6008 Sizes Performance CurvesPSC 5001-5008 Sizes Performance Curves
H(m)
P(kW)
NPSH(m)
300
0
50
20 25 30
200
40
0,5
30
1450 rpm
100
20
10
0
15 35Q
(m3/h)
0
6008 2)
60011)
6002
6003
6004
6005
6006
6007
6008 2)
60011)
6002
6003
6004
6005
6006
6007
20 25 3015 35
20 25 3015 35
50
150
250
1450 rpmH(m)
P(kW)
3)NPSH(m)
300
0
200
0,5
30
100
20
10
0
12 14 16 1810 20Q
(m3/h)
0
12 14 16 1810 20
12 14 16 1810 20
50011)
5002
5003
5004
5005
5006
5007
50082)
50011)
5002
5003
5004
5005
5006
5007
50082)
50
150
250
15
5
25
1)2)
1 Stage pump can not be ordered with liquid sensor.8 Stage pump with liquid sensor is produced upon request
Performance Curves
This double bearing design isproduced for heavy duty applications
Side Channel allows for greater pressure generation per stage
over normal centrifugal pump of the same size and speedSealing options available are Packing Gland,
Mechanical Seal or Cartridge Seal.
Flanges options available are
DIN and ANSI 150 & 300 norms.
Model: PSD (With Mechanical Seal) Model: PSD (With Packing Gland)
PSD Model Pumps
Side Channel Pumps - type PSD
Pumps of the series PSD are horizontal and self-priming, side
channel pumps of segmental type construction which are able
to handle entrained gases.
These pumps have been specifically designed for heavy duty
applications within industry. When pumping pure, turbid or
aggressive media the design is ideally suited.
The range comprises of six sizes each with 1 to 8 hydraulic
stages where by an optimum rating is obtained, ensuring the
pump selected meets the required capacity and head. PSD is a
Side Channel pump operates at a low noise level.
OUTLET
INLET
PSD 1000 - 6000
20
32
32
40
50
65
20
32
32
40
50
65
1000
2000
3000
4000
5000
6000
170
200
200
195
237
262
25
40
40
45
50
65
112
134
134
140
160
172
45
65
65
70
70
70
45
65
65
70
70
70
140
160
160
147
182
197
12
14
14
14
16
16
100
112
112
132
160
180
100
132
132
140
165
180
142
180
180
200
220
260
105
135
135
155
170
195
60
110
110
120
120
145
105
140
140
150
165
185
75
140
140
150
165
185
5
6
6
8
8
10
18.2
21.5
21.5
27.0
31.0
35.5
16
19
19
24
28
32
14
16
16
16
18
18
14x4
18x4
18x4
18x4
18x4
18x8
Dimensions [mm]
Pu
mp
In
let
Pu
mp
Ou
tle
t
D G H QLK M N P T U V B1A B C B2 B3SPu
mp
Siz
e
1000
2000
3000
4000
5000
6000
432
506
506
500
594
669
232
280
280
270
330
384
122
146
146
159
175
210
23
41
41
47
73
103
432
506
506
555
669
757
232
280
280
325
405
472
122
146
146
214
250
298
23
42
42
54
84
119
466
546
546
610
744
845
266
320
320
380
480
560
156
186
186
269
325
386
25
45
45
61
95
135
500
586
586
665
819
933
300
360
360
435
555
648
190
226
226
324
400
474
27
48
48
68
106
151
534
626
626
720
894
1021
334
400
400
490
630
736
224
266
266
379
475
562
29
51
51
75
117
167
568
666
666
775
969
1109
368
440
440
600
705
824
258
306
306
434
550
650
31
54
54
82
128
183
602
706
706
830
1044
1197
402
480
480
655
780
912
292
346
346
489
625
738
33
57
57
89
139
199
636
746
746
885
1119
1285
436
520
520
710
855
1000
326
386
386
544
700
826
35
60
60
96
150
215
1 6 7 82 3 4 5
FE KgJ F FE EKg KgJ JKgE F J Kg Kg Kg KgE E E EF F F FJ J J J
Dimensions and Weights According to Stage Numbers
Number of Stage
Pu
mp
Siz
e
Flange dimensions in accordance with PN40 DIN 2545 at standard pumps. (upon request ANSI 150&300 norm)
OUTLET INLET
F C
E
G
H AJ
D
B
B2
B1
B3
LK
M
Q
S
ÿ Vÿ Uÿ T
P
Dimensional Drawing
PSD ModelDimensional Drawing of Bare Shaft Pump
Vane Impeller Bushing
Discharge Casing
Suction Casing
Suction Body
Discharge Body
Mechanical Seal Casing
Bearing Casing
Shaft
Vane Impeller
Stage O-Ring
Mechanical Seal Casing O-Ring
Ball Bearing
Lip Seal (Inner)
Lip Seal (Outer)
Dust Seal
Mechanical Seal (Turn Right)
Mechanical Seal (Turn Left)
Snap Ring for Shaft
Snap Ring for Bearing
Snap Ring for Lip Seal
2815
3320
4140
4145
4150
4440
4450
7210
7220
7230
Tie Bolt
Tie Bolt Nut
Tie Bolt Washer
Screw for Bearing Casing
Screw for Mechanical Seal Casing
Flat Key for Coupling
Flat Key for Vane Impeller
Grease Fitting
9110
9120
9130
9140
9170
9500
9501
9870
0242
1130
1140
1150
1160
1195
1280
2200
2460
2810
ParÁa AdıPart List Part List Part ListItem ItemItem
4150
9870
4140
1280
9110
9120
9130
1130 0242
1150
1160
2810
9501
7220
7230
3320
9170
1195
2815
9140
4450
2460
1140 4440 9170
1280
4140
9870
7210
9500
2200
9140
2815
1195
3320
7230 7220
4145
Spare Part List
PSD ModelSpare Part List of Pump with Mechanical Seal
Carbon Graphite Bushing
This single bearing design is produced
or medium duty applications
Side Channel allows for greater pressure generation per stage
over normal centrifugal pump of the same size and speedSealing options available are Packing Gland,
Mechanical Seal or Cartridge Seal.
Flanges options available are
DIN and ANSI 150 & 300 norms.
Side Channel Pumps - type PSV
Pumps of the series PSV are horizontal and self-priming, side
channel pumps of segmental type construction which are able
to handle entrained gases.
These pumps have been specificially designed for medium duty
applications within industry. When pumping pure, turbid or
aggressive media the design is ideally suited.
The range comprises of six sizes each with 1 to 8 hydraulic stages
whereby an optimum rating is obtained, ensuring the pump selected
meets the required capacity and head.
OUTLET
INLET
PSV 1000 - 6000
Model: PSV (With Mechanical Seal) Model: PSV (With Packing Gland)
PSV Model Pumps
1000
2000
3000
4000
5000
6000
362
440
440
424
512
572
232
280
280
270
330
384
122
146
146
159
175
210
23
41
41
43
69
98
362
440
440
479
587
660
232
280
280
325
405
472
122
146
146
214
250
298
23
42
42
50
80
114
396
480
480
534
662
748
266
320
320
380
480
560
156
186
186
269
325
386
25
45
45
57
91
130
430
520
520
589
737
836
300
360
360
435
555
648
190
226
226
324
400
474
27
48
48
64
102
146
464
560
560
644
812
924
334
400
400
490
630
736
224
266
266
379
475
562
29
51
51
71
113
162
498
600
600
699
887
1012
368
440
440
545
705
824
258
306
306
434
550
650
31
54
54
78
124
178
532
640
640
754
962
1100
402
480
480
600
780
912
292
346
346
489
625
738
33
57
57
85
135
194
566
680
680
809
1037
1188
326
520
520
655
855
1000
326
386
386
544
700
826
35
60
60
90
146
210
1 6 7 82 3 4 5
FE KgJ F FE EKg KgJ JKgE F J Kg Kg Kg KgE E E EF F F FJ J J JPu
mp
Siz
e
Dimensions and Weights According to Stage Numbers
Number of Stage
Flange dimensions in accordance with PN40 DIN 2545 at standard pumps. (upon request ANSI 150&300 norm)
20
32
32
40
50
65
20
32
32
40
50
65
1000
2000
3000
4000
5000
6000
170
200
200
195
237
262
25
40
40
45
50
65
112
134
134
140
160
172
45
65
65
70
70
70
45
65
65
70
70
70
70
95
95
70
100
100
12
14
14
14
16
16
100
112
112
132
160
180
100
132
132
140
165
180
142
180
180
200
220
260
105
135
135
155
170
195
60
110
110
120
120
145
105
140
140
150
165
185
75
140
140
150
165
185
5
6
6
8
8
10
18.2
21.5
21.5
27.0
31.0
35.5
16
19
19
24
28
32
14
16
16
16
18
18
14x4
18x4
18x4
18x4
18x4
18x8
D G H QLK M N P T U V B1A B C B2 B3SPu
mp
In
let
Pu
mp
Ou
tle
t
Pu
mp
Siz
e Dimensions [mm]
OUTLET INLET
F C
E
G
H AJ
D
B
B2
B1
B3
LK
M
QS
ÿ Vÿ Uÿ T
P
17
Dimensional Drawing
PSV ModelDimensional Drawing of Bare Shaft Pump
Vane Impeller Bushing
Discharge Casing Bushing
Discharge Casing
Suction Casing
Suction Body
Discharge Body
Discharge Bushing Casing
Mechanical Seal Casing
Bearing Casing
Shaft
Vane Impeller
Stage O-Ring
Mechanical Seal Casing O-Ring
Bushing Casing O-ring
Ball Bearing
Lip Seal (Inner)
Lip Seal (Outer)
Mechanical Seal
Snap Ring for Shaft
Snap Ring for Bearing
2460
2810
2815
2830
3320
4140
4145
4440
7210
7220
Snap Ring for Lip Seal
Tie Bolt
Tie Bolt Nut
Tie Bolt Washer
Screw for Bearing Casing
Screw for Mechanical Seal Casing
Screw for Bushing Casing
Flat Key for Coupling
Flat Key for Vane Impeller
Grease Fitting
7230
9110
9120
9130
9140
9170
9180
9500
9501
9870
0242
0252
1130
1140
1150
1160
1190
1195
1280
2200
ParÁa AdıPart List Part List Part ListItem Item Item
0252
9110
9120
9130 1130
0242
1150
1160
2810
9180
1190
2830 2460
7220
3320
7230
4145
9140 1195
2815
2200
9500
7210
9870
4140
1280
9170
4440
1140
9501
Spare Part List
PSV ModelSpare Part List of Pump with Mechanical Seal
Model No: PSC 3008 Underground Tank Application Model No: PSC 3008 Underground Tank Application
Model No: PSC 2004 Skid System Application for LPG Model No: PSC 5006 Skid System Application Road
Tanker Unloading Pump
Applications
�
�
�
�
�
�
�
�
LPG transfer
LPG Auto Gas Station
Skid Systems
Cylinder filling
Refrigerants
Low density hydrocarbons
Liquefied gasses
(HFC-12, HFC-22, HFC-134A, HFC-410A etc.)
(Pentane, Butane, Isobutane,
Propan etc.)
(DME, Hexane etc.)
Oil Filling Plants (Vegetable and animal oils etc.)
Model No: PSC 5008 / Capacity 20 m/h 20 Bar3
Model No: PSC 6008 / Capacity 35 m/h 20 Bar3
LPG Storage Tanks Application
LPG Filling Plants Application
Oil Filling Plants
Applications
By-Pass models and technical specifications.
By-Pass Type
PB 25
PB 40
PB 50
BSP NPT
Max. OperatingPressure
ConnectionType
1î
1½î
2î
By-PassInlet-Outlet
15 BAR
(217.5 psi)
PB 32 1ºî
By-Pass Type
PBF 32
PBF 50
PBF 65
BSP NPT
Max. OperatingPressure
ConnectionType
1½î
2î
By-PassInlet-Outlet
15 BAR
(217.5 psi)
PBF 40
1ºî
2½î
Special
Flange
Application
Upon
Request
By-Pass Type
PC 25
PC 40
PC 50
BSP NPT
Max. OperatingPressure
ConnectionType
1î
1½î
2î
By-PassInlet-Outlet
15 BAR
(217.5 psi)
PC 32 1ºî
Technical Specifications and Models of PB Series By-Pass valves Technical Specifications and Models of PC Series By-Pass valves
Technical Specifications and Models of PBF Series By-Pass valves.
PC Type By-Pass ValvePB Type By-Pass Valve PBF Type By-Pass Valve
Type of By-Pass
VERSA Pump differential by-pass valves are designed to protect pumps and system components from excessive pressure damage.
VERSA Pump by-pass valves can be setted between 0-15 bar.
With only two moving parts, operationis simple and reliable..
By-pass should not be open continuously to protect system against any damage or explosion.
VERSA Pumps can be supplied with or without By-Pass Valves.
ISO 9001-2008