Protegus App Quick Manual

Wiring Diagram for Arm/Disarm Keyswitch

G10T

Programming Section

1. SP panel.

Enter programming.

Press section <zone definition> <partition> [ENTER CLEAR]

Eg: Press section [005], [26][1][ENTER CLEAR], means ZONE 5 keyswitch momentary.

2. EVO panel

Enter programming.

Enter 0501 <serial number> <input - zone>

Eg: 0501 <21121123> <004> mean panel serial number and zone 4.

Enter 0601 <keyswitch momentary> <partition>

Eg: 0601 <1><1> mean keyswitch momentary partition 1.

3. FBII panel - XL2T

Enter programming.

Press [CODE][*][2468][1] <zone><zone type> #### [STAY]

Press [CODE][*][2468][1] <*22 > <8> ### [STAY], mean zone 6 keyswitch.

** Must use 2.2k resistor in series for keyswitch.

4. CERBER panel – C52

Enter programming.

Press [*][8][0269] <zone><zone type> ####

Press [*][8][0269] < 05 > < 10 > #### , mean zone 5 keyswitch.

** Must use 3.3k resistor in series for keyswitch.

5. CERBER panel – C62

Enter programming.

Press [*][8][0269] <zone><zone type> ####

Press [*][8][0269] < 06 > < 14 > #### , mean zone 6 keyswitch.

** Must use 2.2k resistor in series for keyswitch.

How to add device into Protegus

1. Select Remote Control SMS for PGM in Main tab.

2. GPRS reporting tab

Key in Protegus IP and port using G10config.

Primary IP: 194.135.84.247 or protegus.eu

Port: 55000

Protocol must be TRK_TCP

3. Login to Protegus App.

4. Click at Add new system.

5. Key in the details.

Name: your device name.

IMEI: your device IMEI number.

Service code: Need to key in if use SP231.

Address: The device location

After that click Create button.

How to get IMEI number For first time device to read IMEI number.

1. Connect to 12V power supply (to read and store IMEI number automatically) to Trikdis

communicator, and Power cycle.

2. Use G10config and connect to the Trikdis. At bottom of G10config will show IMEI number.

Copy that IMEI number and key in into Protegus app.

Protegus App Features

1. Areas

1. Area will show base on your panel area (partition) and show area status.

2. You can arm and disarm panel by click on lock icon. Once you already arm or

disarm, need to click refresh icon to refresh the status of panel but need to wait

few second.

3. Click on icon to rename, add zone and add user.

i. Click Rename to rename the area.

After rename area click save button.

ii. Click Zones to add zones.

Click Add zone to add zone.

Key in Queue No (zone number) and zone name. Click Add zone to add.

iii. Click Users to add account users.

Click Add

Fill up all the details. Once done click Add button.

2. Settings

Edit system setting.

1. Address can be edit.

2. Change the time zone to our time zone (GMT +8).

3. Click Arm/Disarm with PGM to enable Arm/Disarm function in Areas tab (if use

Arm/Disarm function).

3. Events

1. Display all events.

2. Click on filter icon as per highlight in red to do filtering.

Can filter base on Event type.

Can view the events from starting date until ending date.

Can do auto select by day, week or month.

Click Filter to complete filtering.

4. Sensors

Only available on SP231 panel.

5. Output

To trigger PGM output. If you use ARM/DISARM function you cannot use PGM 1 anymore.

6. Profile Settings

Click on highlight icon to change profile settings.

7. All Events

Click on highlight icon to view all events.

8. System Users

Click on highlight icon and click users to add new user. Invitation email will be send to the

user that you added. First user is a master user. All edit the setting only can be done by

master user.

9. Settings

Click on highlight icon and click settings to change the Protegus app setting.

10. Help

Click on highlight icon to get how to add device.

11. Logout

Click on highlight icon to logout from Protegus app.

FAQ

1. Q: How long will the logs are kept in the Protegus app?

A: The logs will be kept in the Protegus app for 30 days.

2. Q: How many users can access the Protegus App?

A: Unlimited user.