http://www.epdmcoatings.net

www.epdmcoatings.net

http://epdmcoatings.blogspot.com/

YOUR ROOF IS LEAKINGAre these what you have in mind?

Solve Persistent Roof Leaks

Reduce Cooling Costs

Avoid Costly Re-Roofs

Lasts 10 Years

Stop! Temporary patches can aggravate the leak.

IN OUR WEBSITE

Roof repair and restoration specifica-tions in CSI format for the following roof types:

Built Up Roofing• Concrete Roofing• Metal Roofing• Modified Bitumen• Polyurethane Foam• Single Ply (EPDM, TPO, PVC)•

Coating Adhesion Test

Using a Wet Film Thickness Gauge

What’s Next?

Call us or simply go to www.epdmcoatings.net to request for a free estimate or download a roof repair white paper.

The Roof Repair Blog

Protected by EPDM

Energy costs are skyrocketing! Cut cooling costs, extend

the life of airconditioning equipment while reducing your

carbon footprint with EPDM Coatings.

Reflect solar radiation instead of absorbing it. Our roof coatings significantlyreduced roof surface temperature of this built up roof. The coated area is coolerby 66.8 degrees.

Approximately 11 million tons of asphalt roofing waste ends up in US landfillseach year. Discarded roofing comprises about 7% to 10% of total landfill waste.Our Coatings extended the life of this roof and prevented about 80,000 squarefeet of asphaltic roofing material from being dumped in landfills.

Ph: 610-298-1989

© Copyright 2011 EPDM Coatings LLC. All Rights Reserved.

Address For RMA Contractors Only P.O Box 3429 Wernersville PA 19609 EPDM Coatings N.E Sales Office 494 Bridgeport Ave Suite 101, PMB 342 Shelton CT 06484-4748

610-298-1989www.epdmcoatings.net

visit www.epdmcoatings.net or call us at 610-298-1989

www.epdmcoatings.net

www.epdmcoatings.net

Pressure Washing Priming Sealing Topcoating

Entire roof is thoroughly cleaned to remove dirt and debris.

PrimeLock® primers ensure adhesion of EnergyGuard® topcoats.

All fasteners, seams, penetrations sealed with SeamStitch®.

EnergyGuard® topcoats dries to form a seamless watertight membrane.

When your roof is nearing the end of its useful life, roof replacement is not the only option for you.

WHAT’S YOUR ROOF TYPE?

On a tight budget?Save up to 50% over re-roofing.

Pulling your hair out over a roof leak?No sweat.

Too busy to shut down?No problem.

Built Up Metal Modified Bitumen Polyurethane Foam Single Ply (EPDM, PVC, TPO)

Polyurethane Foam is easily dam-aged by UV exposure and deterio-rates immediately if left uncoated.

Membrane degradation due to exposure to chemicals, oils and UV is a concern.

Built Up roofs have good water-proofing characteristics but suffers a loss of ductility after prolonged exposure to UV.

Metal Roofing is durable but older profiles with exposed fasteners and seams are prone to leaks.

Single ply roofs do not have the redundancy of multi-ply roofs such as built-up or modified bitumen.

Old Roofs Don’t Just Die ... They Get Reborn.

Will it last?How about 10 years. And it’s renewable!

How can a white coating be green?Two words. Energy savings.

“Re-roofing is very costly and disruptive to your business. As a result, more architects, engineers and building managers are appreciating the benefits of elastomeric roof restoration.”

“Is your leaky roof causing a major disruption? If left unattended, roof leaks can damage your building’s interior and even cause structural deterioration.”

We can make rusted, weathered and leaky roofs look andperform like new again. Replacing an entire roof can takeweeks. Roof restoration with Our Coatings can be donein a fraction of the time without wreaking havoc.

Our roof coating system is installed overyour existing roof. There are no expensivetear offs and disposal costs associated with it.

Seamless roof coatings solve annoyingroof leaks for good.

Roof restoration is done with little or nodisruption to your operations.

EPDM Coatings can be used to restore almost any type of roof.

Your professionally applied Our roofingsystem is warranted for 5 to 10 years and cansimply be recoated if needed.

Multiple studies have shown that reflectiveroof coatings like EnergyGuard® can reduceroof surface temperature up to 90%. Thistranslates to significant savings on cooling.Need more proof? Turn the page.