proprietary limited pneumatic products · 2021. 5. 12. · industrial hydraulics ducting pneumatics...

Industrial Hydraulics Ducting Pneumatics

email: [email protected]

PNEUMATIC PRODUCTS INDUSTRIAL CATALOGUE

www.hishose.com.au

Proprietary Limited

WESTERN BRANCH28 Spencer StreetSunshine West Vic 3020Tel: (03) 8311 7400Fax: (03) 9311 2322

EASTERN BRANCH132 - 134 South Park Drive Dandenong South Vic 3175 Tel: (03) 9794 9299Fax: (03) 9794 9992

NORTHERN BRANCH169-171 Northbourne Rd

Tel: (03) 9305 4600Fax: (03) 9305 4231

Quality ISO 9001

CERT NO QEC22270

2

PN

EU

MA

TIC

PR

OD

UC

TS

CAT

ALO

GU

ES

Other Catalogues Available:

Barfell Plastic Hoses & Tubes

Flexible Ducting

Plastic Tubing & Recoil Hose

Industrial Rubber Hose

Hose Clamps & Clips

IPL Plastic Hose

Email Enquiries: [email protected]

E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

Air Preparations 4

Norgen Valves 11

Norgen Cylinders 16

Accessories 20

Norgren Excelon Pro Series 22

PIAB Vacuum Grippers 28

Univers 29

Blovac Accessories 31

Pressure Pipe System 34

CO

NTEN

TS

Contents:

4

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 02-1007

AIR

PR

EPA

RAT

ION

EXCELON

Excelon, the alternative modular air preparation system from Norgren.Although direct ported, thanks to a patented Quikclamp connection system, Excelon can be used where both stand alone units or modular assemblies are required – just another example of Norgren’s adaptability.

1. PATENTED QUIKCLAMP CONNECTION SYSTEM Simple. Speedy assembly of accessories and combination units.

2. PATENTED QUARTER TURN MANUAL DRAIN Simple 1/4 turn to operate. Features a threaded pipeaway outlet.

3. PATENTED SHUT-OFF VALVE 3/2 with a threaded exhaust and lockable blade for safe system isolation.

4. LUBRICATOR RIGHT FEED DOME Allows full 360º visibility and screwdriver adjustment for easy drip rate setting. Can be made tamper-resistant.

5. BAYONET BOWLS Easy removal for routine maintenance. Detent action prevents removal under

pressure.

6. PUSH TO LOCK ADJUSTING KNOB

7. CAPTIVE ‘O’ RINGS

8. BALANCED VALVE

For improved regulation characteristics.

9. LUBRICATOR SENSOR

Helps to maintain constant oil density with

Plus many more design features and accessories.

1

2

3

4

5

6

7

8

9


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 02-1007

EXCELON MODULAR SYSTEMSBoxed setsFILTER/REGULATORS AND LUBRICATORS G1/4 TO G1/2

Boxed sets include:• Filter/regulator and micro-fog lubricator complete

with exhausting shut-off valve, pressure gauge and mounting brackets

• • Quick release bayonet bowls• Push to lock adjusting knob with tamper resistant

option• All round (360°) visibility of lubricator sight feed

dome for ease of drip rate setting• Micro-fog lubricator for most general purpose

pneumatic applications

TECHNICAL DATAMedium: Compressed airMaximum inlet pressure: 10 barAmbient temperature: -20°C to +50°CConsult our Technical Service for use below +2°C

PortSize

Element(micron)

Bowl Pressure range (bar)

kg Operation ModelAuto

Manual

G1/4 40 Transparent 0,3 ... 10 1,65 Relieving BL72-201GA BL72-221G

G3/8 40 Transparent 0,3 ... 10 2,26 Relieving BL73-301G BL73-321G

G1/2 40 Guarded Trnspnt 0,3 ... 10 3,55 Relieving BL74-401G BL74-421G

GENERAL PURPOSE FILTERS F72G, F73G, F74G G1/4 to G3/4• Excelon design allows in-line installation or modular

installation with other Excelon products• Quick release bayonet bowl

TECHNICAL DATAMedium: Compressed air onlyMaximum inlet pressure: 10 barAmbient temperature: -34°C to +50°CConsult our Technical Service for use below +2°C

PortSize

Flow dm3/s

kg Model Auto Service Kit Manual

Service Kit Auto

Manual

G1/4 30 0,45 F72G-2GN-AL3 F72G-2GN-QT3 F72G-KITA40 F72G-KITM40

G1/4 29 0,50 F73G-2GN-AT3 F73G-2GN-QT3 F73G-KITA40 F73G-KITM40

G3/8 30 0,45 F72G-3GN-AL3 F72G-3GN-QT3 F72G-KITA40 F72G-KITM40


G3/8 66 1,42 F74G-3GN-AP3 F74G-3GN-QP3* F74G-KITA40 F74G-KITM40




PLEASE NOTE:This is only a selection of the range available

For further technical information or a comprehensive pneumatics catalogue please contact our pneumatics sales division.

AIR

PREPA

RATIO

N

6

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 02-1007

AIR

PR

EPA

RAT

ION

EXCELON MODULAR SYSTEMSPURAIRE’® OIL REMOVAL FILTERS F72C, F73C, F74C, F74H G1/4 TO G3/4• • Quick release bayonet bowl• Service indicator standard•

TECHNICAL DATAMedium: Compressed airMaximum inlet pressure: 10 bar transparent bowl or guarded; 8 bar transparent bowl F72C with auto drainRemaining oil content: 0,01 mg/m‹ at +21°CParticle removalAmbient temperature: -34°C to +50°CConsult our Technical Service for use below +2°C

PortSize

Flow dm3/s

kg Bowl Model Auto Manual Service Kit

G1/4 4,5 0,40 Transparent F72C-2GD-ALO F72C-2GD-QT0 F72C-KITA0C

G1/4 10,0 0,54 Transparent F73C-2GD-ATO F73C-2GD-QT0 F73C-KITA0C

G3/8 4,5 0,40 Transparent F72C-3GD-ALO F72C-3GD-QT0 F72C-KITA0C

G3/8 10,0 0,54 Transparent F73C-3GD-ATO F73C-3GD-QT0 F73C-KITA0C

G3/8 16,0 0,85 Guarded transparent

F74C-3GD-APO F74C-3GD-QP0 F74C-KITA0C

G1/2 10,0 0,54 Transparent F73C-4GD-AT0 F73C-4GD-QT0 F73C-KITA0C


F74C-4GD-APO F74C-4GD-QP0 F74C-KITA0C


F74H-4GD-APO F74H-4GD-QP0 F74H-KITA0C


F74H-6GD-APO F74H-6GD-QP0 F74H-KITA0C

‘ULTRAIRE®’ OIL VAPOUR REMOVAL FILTERS F72V, F74V G1/4 TO G3/4• Absorbing type activated carbon element removes oil

vapours and most hydrocarbon odours• Quick release bayonet bowl• High intensity blue colour change indication (F72V)

TECHNICAL DATAMedium: Compressed airMaximum inlet pressure: 10 bar (F72V); 17 bar (F74V)Remaining oil content: 0,003 mg/m‹ max. at +20°C.Ambient temperature: Transparent bowl: -34°C to +50°C (F72V); Metal bowl: -34°C to +65°C (F74V)Consult our Technical Service for use below +2°C

Port Size Flow dm3/s Bowl kg Model Service Kit

G1/4 1,6 Transparent 0,52 F72V-2GN-ETC F72V-KITA0V

G3/8 1,6 Transparent 0,52 F72V-3GN-ETC F72V-KITA0V

G3/8 13 Metal 1,15 F74V-3GN-EMA F74V-KITA0V




E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

B72GB73G

B74G

REF: 02-1007

EXCELON MODULAR SYSTEMSFILTER/REGULATORS B72G, B73G, B74G G1/4 to G3/4• Excelon design allows in-line installation or modular installation with other Excelon

products• • Quick release bayonet bowl• Push to lock adjusting knob with tamper resistant accessory

TECHNICAL DATAMedium: Compressed airMaximum inlet pressure: 10 barGauge ports: Rc1/8Ambient temperature: -34°C to +50°C.Consult our Technical Service for use below +2°C

Port Size

Flow dm3/s

Bowl kg Model Auto Model Manual Service Kit Auto

Service Kit Manual

G1/4 38 Transparent 0,56 B72G-2GK-AL3-RMN

B72G-2GK-QT3-RMN

B72G-KI-TA40R

B72G-KIT-M40R

G1/4 49 Transparent 0,7 B73G-2GK-AT3-RMN

B73G-2GK-QT3-RMN

B73G-KI-TA40R

B73G-KIT-M40R

G3/8 38 Transparent 0,56 B72G-3GK-AL3-RMN

B72G-3GK-QT3-RMN

B72G-KI-TA40R

B72G-KIT-M40R


B73G-3GK-QT3-RMN

B73G-KI-TA40R

B73G-KIT-M40R

G3/8 77 Guarded transparent

1,25 B74G-3GK-AP3-RMN

B74G-3GK-QP3-RMN

B74G-KI-TA40R

B74G-KIT-M40R


B73G-4GK-QT3-RMN

B73G-KI-TA40R

B73G-KIT-M40R



B74G-4GK-QP3-RMN

B74G-KI-TA40R

B74G-KIT-M40R



B74G-6GK-QP3-RMN

B74G-KI-TA40R

B74G-KITM4

AIR

PREPA

RATIO

N

8

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 02-1007

EXCELON MODULAR SYSTEMSPRESSURE REGULATORS R72G, R73G, R74G – G1/4 TO G3/4• Excelon design allows in-line or

modular installation• Balanced valve design for optimum

pressure control• Standard relieving models allow

reduction of downstream pressure when the system is dead-ended

• Push to lock adjusting knob with tamper resistant accessory

• Manifold regulators can be banked together to provide numerous regulated pressures from a common primary pressure

TECHNICAL DATAMedium: Compressed air Maximum inlet pressure: 20 barGauge ports: Rc1/8Ambient temperature: -34°C to +65°C (R72G); -34°C to +80°C (R73G & R74G)Consult our Technical Service for use below +2°C

Port Size Flow dm3/s kg Model Service Kit

G1/4 33 0,36 R72G-2GK-RMN R72G-KITRG1/4 50 0,48 R73G-2GK-RMN R73G-KITRG3/8 33 0,36 R72G-3GK-RMN R72G-KITRG3/8 60 0,48 R73G-3GK-RMN R73G-KITRG3/8 98 0,82 R74G-3GK-RMN R74G-KITRG1/2 60 0,48 R73G-4GK-RMN R73G-KITRG1/2 105 0,80 R74G-4GK-RMN R74G-KITRG3/4 105 0,78 R74G-6GK-RMN R74G-KITR

LUBRICATORS L72, L73, L74 – G1/4 TO G3/4• Quick release bayonet bowl.• Flow sensor provides a nearly

constant oil/air ratio over a wide

• All round (360°) visibility of sightfeed dome for ease of drip rate setting

• Micro-fog and oil-fog

TECHNICAL DATAMedium: Compressed air Maximum inlet pressure: 10 barStart point: L72C 0,47 dm‹/s; L72M 0,94 dm‹/s; L73 0,71 dm‹/s; L74 0,94 dm‹/s

Ambient temperature: -20°C to +50°CConsult our Technical Service for use below +2°C

Port Size

Flow dm3/s Bowl Bowl Cap. (litre)

kg Model Service Kit

G1/4 24 Transparent 0,04 0,49 L72M-2GP-ETN L72M-KIT






0,2 0,60 L74M-3GP-QPN L74M-KIT





AIR

PR

EPA

RAT

ION


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

EXCELON MODULAR SYSTEMSPRESSURE RELIEF VALVES V72G, V74G – G1/4 TO G3/4• Excelon design allows in-line installation or modular installation with other

Excelon products• Push to lock adjusting knob with tamper resistant accessory•

retarding excessive pressure build up

TECHNICAL DATAMedium: Compressed airGauge ports: Rc1/8Relief port: G1/4 (V72G), G1/2 (V74G)Ambient temperature: -34°C to +65°C (V72G); -34°C to +80°C (V74G)Consult our Technical Service for use below +2°C

Port Size kg Model Service Kit

G1/4 0,33 V72G-2GK-NMN V72G-KIT





EXCELON MODULAR ACCESSORIES

Series Port Size Wall Mounting Bracket

Quikclamp Quikclamp & Quikclamp Wall Bracket

F72G G1/4 4224-50 4214-51 4214-52

G3/8 4224-50 4214-51 4214-52

F73G G1/4 4424-50 4314-51 4314-52

G3/8 4424-50 4314-51 4314-52

G1/2 4424-50 4314-51 4314-52

G3/4 4424-50 4314-51 4314-52

F74G G3/8 4324-50 4314-51 4314-52

G1/2 4324-50 4314-51 4314-52

G3/4 4324-50 4314-51 4314-52

AIR

PREPA

RATIO

N

REF: 02-1007

10

PN

EU

MA

TIC

PR

OD

UC

TS

OLYMPIAN PLUS FILTER, REGULATORS & LUBRICATORS

• Plug in units - nominal 1/2"• Quick connection yoke system• High visibility prismatic sight glass• Quarter turn bayonet bowls

QUICK CONNECT YOKE SYSTEMSimple, speedy assembly of accessories and combination units.

PLUG IN UNITSRapid installation and maintenance. Quarter turn clamp ring graphite impregnated for easy action. Detent action prevents removal under pressure.

BAYONET BOWLSEasy removal for routine maintenance. Detent action to prevent removal under pressure.

UNIQUE PRISMATIC SIGHT GLASS

Colour change service

CAPTIVE O RINGSEasy to assemble with no loose parts.

TAMPER RESISTANT CAPSimple accessory to prevent unauthorised adjustment of regulated pressure.

PORTING BLOCK MOUNTED PRESSURE SWITCHAdjustable pressure switch for feedback to monitoring systems.

SOFT START/QUICK EXHAUST VALVE

3/2 SHUT-OFF VALVESlide valve with lockable blade. Threaded exhaust port.

BOXED SETS

Port Size Pressure Range (bar)* kg Model Auto Model Manual

G1/2 0,3 ... 10 4,15 BL64-401 BL64-421G3/4 0,3 ... 10 4.94 BL64-608 BL64-628G1 0,4 ... 8 5,99 BL68-801 BL68-821

* Can be adjusted to zero bar outlet pressure and generally to pressures in excess of those

For service kit numbers refer to individual units.

07 SERIES AIRLINE EQUIPMENTMiniature FRL 1/8" and 1/4".

Model Description

F07 Miniature General Purpose Compressed Air Filter

R07 Miniature General Purpose Compressed Air Regulator

B07 Miniature General Purpose Compressed Air Filter/Regulator

L07 Miniature Micro-Fog Compressed Air LubricatoAIR

PR

EPA

RAT

ION

REF: 02-1007


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

SUPER ‘X’ CONTROL VALVES

MANUALLY & MECHANICALLY ACTUATED SPOOL VALVE In-line 3/2, 5/2 & 5/3, G1/8, G1/4• Extensive range of integrally ported

solenoid, pilot, manual and mechanically operated valves.

• High performance from proven design•

system appearance and performance•

applications• Integral pilot feed on solenoid operated

valves• Standard diagnostic pin on certain models

TECHNICAL DATAMediumand non lubricatedPressure: 2 - 10 bar. 930 mbar vacuum - 10 bar (pilot models)Flow Characteristics: G1/8 ‘C’ - 1,41 ‘b’ - 0,441; G1/4 ‘C’ - 4,00 ‘b’ - 0,434Temperature: 0ºC to +70ºC Consult our Technical Service for use below +2ºC.

ALTERNATIVE MODELSExternal pilot supply. Manual override on side mounted style solenoid. Contact our Technical Service for details.

MATERIALS

MECHANICALPort Size

Function Actuation kg Model Service Kit

G1/8 3/2 Roller lever (heavy duty) /Spring

0,21 03 0293 02 03 8408 02

G1/8 3/2 Plunger /Spring 0,14 03 0400 02 03 8408 02

G1/8 3/2 Roller /Spring 0,14 03 0402 02 03 8408 02

G1/8 3/2 One-way trip /Spring 0,21 03 0410 02 03 8408 02

G1/8 3/2 Roller lever /Spring 0,21 03 0411 02 03 8408 02

G1/8 3/2 Sensitive roller lever /Spring

0,25 03 0423 02 –

G1/8 3/2 Antenna /Spring 0,21 03 0432 02 –

G1/4 3/2 Plunger /Spring 0,34 03 0600 02 03 8602 02

G1/4 3/2 Roller /Spring 0,34 03 0602 02 03 8602 02

G1/4 3/2 Roller lever /Spring 0,41 03 0611 02 03 8602 02

G1/8 5/2 Roller lever (heavy duty) /Spring

0,29 X3 0393 02 03 8408 02

G1/8 5/2 Plunger /Spring 0,25 X3 0440 02 03 8408 02

G1/8 5/2 Roller /Spring 0,25 X3 0442 02 03 8408 02

G1/8 5/2 Roller lever /Spring 0,32 X3 0451 02 03 8408 02

G1/8 5/2 Sensitive roller lever /Spring

0,36 X3 0463 02 C

G1/8 5/2 Antenna /Spring 0,30 X3 0472 02 –

G1/4 5/2 Plunger /Spring 0,46 X3 0640 02 03 8602 02

G1/4 5/2 Roller /Spring 0,46 X3 0642 02 03 8602 02

G1/4 5/2 Roller lever /Spring 0,53 X3 0651 02 03 8602 02

VALVES

REF: 02-1007

12

PN

EU

MA

TIC

PR

OD

UC

TS

MANUALPort Size

Function Actuation Mid Position

Colour kg Model

G1/8 3/2 Button (palm)/spring – Red 0,29 03 0366 02

G1/8 3/2 Button (palm)/spring – Green 0,29 03 0367 02

G1/8 3/2 Button (palm)/spring – Black 0,29 03 0368 02

G1/8 3/2 Toggle/toggle – Black 0,16 03 0403 02

G1/8 3/2 Button/spring – Black 0,15 03 0404 02

G1/8 3/2 Button/spring – Green 0,15 03 0405 02

G1/8 3/2 Button/spring – Red 0,15 03 0406 02

G1/8 3/2 Button (shrouded)/spring – Black 0,21 03 0414 02

G1/8 3/2 Button (shrouded)/spring – Green 0,21 03 0415 02

G1/8 3/2 Button (shrouded)/spring – Red 0,21 03 0416 02

G1/8 3/2 Key/key – Chrome 0,36 03 0418 02 801

G1/8 3/2 Rotary knob/rotary knob – Black 0,29 03 0298 02

G1/8 3/2 Knob/knob or pilot – Black 0,21 03 0424 02

G1/8 3/2 Knob/knob – Black 0,17 03 0425 02

G1/8 3/2 Emergency stop/twist ring – Red 0,31 03 0299 02

G1/8 3/2 Lever/lever – Black 0,29 03 0437 02

G1/8 3/2 Lever/spring – Black 0,28 03 0438 02

G1/8 3/2 Pedal/spring – Black 1,03 03 0481 02

G1/8 3/2 Pedal/pedal – Black 1,07 03 0483 02

G1/4 3/2 Button/spring – Black 0,35 03 0604 02

G1/4 3/2 Knob/knob – Black 0,37 03 0625 02

G1/4 3/2 Knob/knob or pilot – Black 0,41 03 0627 02

G1/4 3/2 Lever/lever – Black 0,49 03 0637 02

G1/4 3/2 Lever/spring – Black 0,48 03 0638 02

G1/4 3/2 Pedal/spring – Black 1,23 03 0681 02

G1/8 5/2 Toggle/toggle – Black 0,27 X3 0443 02

G1/8 5/2 Button/spring – Black 0,26 X3 0444 02

G1/8 5/2 Button (shrouded)/spring – Black 0,32 X3 0454 02

G1/8 5/2 Key/key – Chrome 0,47 X3 0458 02 801

G1/8 5/2 Rotary knob/rotary knob – Black 0,40 X3 0298 02

G1/8 5/2 Knob/knob or pilot – Black 0,32 X3 0464 02

G1/8 5/2 Knob, push/knob, pull – Black 0,28 X3 0465 02

G1/8 5/2 Emergency stop/twist ring – Red 0,54 X3 0299 02

G1/8 5/2 Lever/lever – Black 0,40 X3 0477 02

G1/8 5/2 Lever/spring – Black 0,40 X3 0478 02

G1/8 5/2 Pedal/spring – Black 1,12 X3 0482 02

G1/8 5/2 Pedal/pedal – Black 1,18 X3 0484 02

G1/4 5/2 Button/spring – Black 0,47 X3 0644 02

G1/4 5/2 Knob/knob – Black 0,49 X3 0665 02

G1/4 5/2 Lever/lever – Black 0,61 X3 0677 02

G1/4 5/2 Lever/spring – Black 0,60 X3 0678 02

G1/4 5/2 Pedal/spring – Black 1,33 X3 0682 02

G1/4 5/2 Pedal/pedal – Black 1,39 X3 0684 02

G1/8 5/3 Lever/lever/lever APB Black 0,44 X3 3437 02

G1/8 5/3 Lever/spring/lever APB Black 0,85 X3 3438 02

G1/8 5/3 Lever/lever/lever COE Black 0,44 X3 3477 02

G1/8 5/3 Lever/spring/lever COE Black 0,85 X3 3478 02

G1/4 5/3 Lever/lever/lever APB Black 0,65 X3 3637 02

G1/4 5/3 Lever/spring/lever APB Black 1,06 X3 3638 02

G1/4 5/3 Lever/lever/lever COE Black 0,65 X3 3677 02

G1/4 5/3 Lever/spring/lever COE Black 1,06 X3 3678 02

VALV

ES

REF: 02-1007


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

ISO #1

ISO #2

ISO #2

ISO #3

ISO #3

ISO #1

Size Function Actuation Flow Regulator

MidPosition

End Solenoid Op. Press

(bar)

Model

ISO #1 5/2 Sol/Spring – – 1,8 ... 10 SXE9573-A7100/***

ISO #1 5/2 Sol/Spring Built-in – 1,8 ... 10 SXE9573-A81-00/***

ISO #1 5/2 Sol/Air spring – – 1 ... 10 SXE9573-A70-00/***

ISO #1 5/2 Sol/Air spring Built-in – 1 ... 10 SXE9573-A80-00/***

ISO #1 5/2 Sol/Sol – – 2 ... 10 SXE0573-A50-00/***

ISO #1 5/2 Sol/Sol Built-in – 2 ... 10 SXE0573-A60-00/***

ISO #1 5/3 Sol/Sol Built-in APB 2 ... 10 SXE9673-A60-00/***

ISO #1 5/3 Sol/Sol Built-in COE 2 ... 10 SXE9773-A60-00/***

ISO #1 5/3 Sol/Sol Built-in COP 2 ... 10 SXE9873-A60-00/***

ISO #2 5/2 Sol/Spring – – 1,8 ... 10 SXE9574-A71-00/***

ISO #2 5/2 Sol/Spring Built-in – 1,8 ... 10 SXE9574-A81-00/***


ISO #2 5/2 Sol/Air spring Built-in – 1 ... 10 SXE9574-A80-00/***

ISO #2 5/2 Sol/Sol – – 2 ... 10 SXE0574-A50-00/***

ISO #2 5/2 Sol/Sol Built-in – 2 ... 10 SXE0574-A60-00/***

ISO #2 5/3 Sol/Sol Built-in APB 2 ... 10 SXE9674-A60-00/***

ISO #2 5/3 Sol/Sol Built-in COE 2 ... 10 SXE9774-A60-00/***

ISO #2 5/3 Sol/Sol Built-in COP 2 ... 10 SXE9874-A60-00/***

ISO #3 5/2 Sol/Spring – – 1,8 ... 10 SXE9575-A71-00/***


ISO #3 5/2 Sol/Sol – – 2 ... 10 SXE0575-A50-00/***

ISO #3 5/3 Sol/Sol – APB 2 ... 10 SXE9675-A50-00/***

ISO #3 5/3 Sol/Sol – COE 2 ... 10 SXE9775-A50-00/***

ISO #3 5/3 Sol/Sol – COP 2 ... 10 SXE9875-A50-00/***

ISO-STAR CONTROL VALVES• Specially coated glandless spool and sleeve for long trouble-free life.• • Position indicators on single solenoid and all pilot models.• Low power solenoids feature manual override as

standard.• Wide range of sub-bases and accessories.

TECHNICAL DATAMediumlubricated and dry.Pressure: 1 - 10 bar single solenoid, 2 - 10 bar double solenoid and pilotFlow Characteristics

Temperature: -20ºC to +50ºC. Consult our Technical service for use below +2ºC.Materials: Die cast aluminium body, anodised aluminium

seals.

SOLENOID PILOT ACTUATED VALVES

VALVES

REF: 02-1007

14

PN

EU

MA

TIC

PR

OD

UC

TS ISO #1

ISO #1

ISO #2

ISO #2

ISO #3

ISO #3

AIR PILOT ACTUATED VALVESSize Function Actuation Flow

RegulatorMid Position

Operating Pressure (bar)

Model

ISO #1 5/2 Pilot/Spring – – -0,9 ... 16 SXP9573-170-00

ISO #1 5/2 Pilot/Spring Built-in – -0,9 ... 16 SXP9573-180-00

ISO #1 5/2 Pilot/Pilot – – -0,9 ... 16 SXP0573-170-00

ISO #1 5/2 Pilot/Pilot Built-in – -0,9 ... 16 SXP0573-180-00

ISO #1 5/3 Pilot/Pilot Built-in APB -0,9 ... 16 SXP9673-180-00

ISO #1 5/3 Pilot/Pilot Built-in COE -0,9 ... 16 SXP9773-180-00

ISO #1 5/3 Pilot/Pilot Built-in COP -0,9 ... 16 SXP9873-180-00


ISO #2 5/2 Pilot/Spring Built-in – -0,9 ... 16 SXP9574-180-00


ISO #2 5/2 Pilot/Pilot Built-in – -0,9 ... 16 SXP0574-180-00

ISO #2 5/3 Pilot/Pilot Built-in APB -0,9 ... 16 SXP9674-180-00

ISO #2 5/3 Pilot/Pilot Built-in COE -0,9 ... 16 SXP9774-180-00

ISO #2 5/3 Pilot/Pilot Built-in COP -0,9 ... 16 SXP9874-180-00



ISO #3 5/3 Pilot/Pilot – APB -0,9 ... 16 SXP9675-170-00

ISO #3 5/3 Pilot/Pilot – COE -0,9 ... 16 SXP9775-170-00

ISO #3 5/3 Pilot/Pilot – COP -0,9 ... 16 SXP9875-170-00

APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. Service kits not available for these valves.

BASESVDMA 24 345 SUB-BASES

Form A Side Port

Form C Manifold

Form D End Plates

Blanking Disk

ISO#1 M/P19126 (G1/4) CQM/22152/3/21 CQM/22152/3/22 FP 8382

ISO#2 M/P19132 (G3/8) CQM/22253/3/21 CQM/22253/3/22 FP 8482

ISO#3 M/P19138 (G1/2) CQM/22354/3/21 CQM/22354/3/22 FP 8582

UNIVERSAL BASE OPTIONS

Modular Base Side & Bottom Ported

End Plates* End plate, end ports open

Transition plate

ISO#1 CQM/22152/3/27 (G1/4)

CQM/22152/3/28 (G3/8)

CQM/22152/3/31 (G3/8)

CQM/22152/3/29 (#1-#2)

ISO#2 CQM/22253/3/27 (G3/8)

CQM/22253/3/28 (G1/2)

CQM/22253/3/31 (G1/2)

ISO-STAR CONTROL VALVESVA

LVES

REF: 02-1007


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

BUSCHJOST 82400 SERIESINDIRECT SOLENOID ACTUATED DIAPHRAGM VALVES8 TO 50 MM ORIFICE – 2/2, NC, G1/4 TO G2• • Damped operation• Clear compact design• Solenoid interchangeable without tools

(Click-on®)• Particularly suitable for use as water valve

in accordance with DIN• EN 60730-2-8

TECHNICAL DATA

MediumFlow direction: FixedMounting position -noid uprightFluid temperature: -10°C to +90°C max.Ambient temperature: +50°C max.

MATERIALSBody: brassSeat seal: NBR (Perbunan)Internal parts: stainless steel, PVDF

.

Bore Port Size Operating Pressure (bar)

kv Value kg Model

8 G 1/4 0,1 ... 16 1,90 0,47 8240000xxxx*****

10 G 3/8 0,1 ... 16 3,00 0,45 8240100xxxx*****

12 G 1/2 0,1 ... 16 3,80 0,50 8240200xxxx*****

20 G 3/4 0,1 ... 16 6,10 0,65 8240300xxxx*****

25 G 1 0,1 ... 16 9,50 0,95 8240400xxxx*****

32 G 11/4 0,1 ... 10 (16**) 23,00 2,73 8240500xxxx*****

40 G 11/2 0,1 ... 10 (16**) 25,00 2,53 8240600xxxx*****

50 G 2 0,1 ... 10 (16**) 41,00 3,85 8240700xxxx*****

Solenoid valves

PRO

CESS VA

LVES

REF: 02-1007

84500 SERIES

Seat valvesInternal threads G 1/2 to G 2 or 1/2" NPT to 2" NPTFeatures• Easy rebuilding into »normally open« or »double-acting« without tools

• Suitable for vacuum up to max. 90%

• With or without mounted pilot valve

Product No. Port Size mm Operating Pressure bar*

Pilot Pressure bar

kg**

8450200 G1/2 15 0 ... 16,0 (25) 3,5 ... 10 1,48450300 G3/4 20 0 ... 10,0 (16) 3,5 ... 10 1,58450400 G1 25 0 ... 10,0 3,5 ... 10 1,88450500 G1 1/4 32 0 ... 7,0 3,5 ... 10 2,48450600 G 1 1/2 40 0 ... 4,5 3,5 ... 10 2,78450700 G2 50 0 ... 3,0 3,5 ... 10 3,9

** Without pilot value Cv (US) = kv x 1,2

16

PN

EU

MA

TIC

PR

OD

UC

TS

NORGREN CYLINDERS

ROUNDLINE CYLINDERS (ISO) – RM/8000/MDouble acting, ISO 6432Ø 10 to 25 mm

• Magnetic piston as standard

• • High strength, double

crimped end cap design• Corrosion resistant• Buffer or adjustable cushioning• Nose mounting nut and piston rod locknut as standard

TECHNICAL DATAMediumOperation: Double acting, magnetic piston with buffer or adjustable cushioningOperating pressure: 1 to 10 barOperating temperature: -10°C to +80°C max.Consult our Technical Service for use below +2°C

STANDARD MODELSBore Piston

Rod BorePort Size Model Buffer

CushioningAdjustable Cushioning

10 4 M5 RM/8010/M/* -

12 6 M5 RM/8012/M/* -

16 6 M5 RM/8016/M/* RM/8017/M/*

20 8 G1/8 RM/8020/M/* RM/8021/M/*

25 10 G1/8 RM/8025/M/* RM/8026/M/*

NORGREN CYLINDERRM/92000, RM/92000/M COMPACT DOUBLE ACTING•

model• The magnet pistons available on

• Suitable for non-lubricated supplies• Entirely manufactured from non-

corrodible materials• Wear ring on 32mm bore and above

greatly increases working life

TECHNICAL DATAMediumOperation: Double acting, non-cushionedOperating Pressure: 0,5 - 10 barOperating Temperature+80ºC on dry, non-lubricated air. Consult our Technical Service for use below +2ºC. STANDARD MODELS

Bore Piston Bore

Port Size

Magnetic Standard Guided Service Kit

12 6 M5 RM/92012/M/* –

16 8 M5 RM/92016/M/* RM/92016/N4/* –

20 10 M5 RM/92020/M/* –

25 12 M5 RM/92025/M/* RM/92025/N4/*

32 16 G1/8 RM/92032/M/* RM/92032/N4/*

40 16 G1/8 RM/92040/M/* RM/92040/N4/*

50 20 G1/8 RM/92050/M/* – QM/92050/00

63 20 G1/4 RM/92063/M/* – QM/92063/00

80 25 G1/4 RM/92080/M/* – QM/92080/00

100 25 G1/4 RM/92100/M/* – QM/92100/00

CYL

IND

ERS

REF: 03-1007


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

CYLIN

DER

S

REF: 03-1007

NORGREN CYLINDERS

PRA/182000, PRA/182000/M ISO6431 DOUBLE-ACTING NON-MAGNETIC & MAGNETIC PISTON

• • Comprehensive range of standard mountings• Magnetic piston models provide a more compact installation and reduce costs• Suitable for lubricated and non-lubricated operations

TECHNICAL DATAMediumStandardsOperation: Double acting with adjustable cushioningOperating Pressure: 1 - 16 barOperating Temperature: -20ºC* to + 80ºC.Consult our Technical Service for use below +2ºCCylinder Diameters: 32, 40, 50, 63, 80, 100, 125, 160, 200 mmStandard Strokes: 25, 50, 80, 100, 125, 160, 200, 250, 320, 400, 500 mmNon-standard StrokesMaterials: Stainless steel piston rod, anodised aluminium barrel, die cast aluminium end covers, nitrile rubber seals, polyurethane piston and piston rod seals.

STANDARD MODELSBore Piston Rod

BorePort Size Model (Non-magnetic) Model (Magnetic)

32 12 G1/8 PRA/182032/* PRA/182032/*M

40 16 G1/4 PRA/182040/* PRA/182040/*M

50 20 G1/4 PRA/182050/* PRA/182050/*M

63 20 G3/8 PRA/182063/* PRA/182063/*M

80 25 G3/8 PRA/182080/* PRA/182080/*M

100 25 G1/2 PRA/182100/* PRA/182100/*

125 32 G1/2 PRA/182125/* PRA/182125/*

*Insert stroke length in mmFor combinations of cylinder variants consult our Technical Service.

18

PN

EU

MA

TIC

PR

OD

UC

TS

CYLINDERMOUNTINGS

Bore D F L R S SW

32 QA/8032/23 QM/8025/25 QA/8032/24 QA/8032/27 QA/8032/41 M/P19493

40 QA/8040/23 QM/8040/25 QA/8040/24 QA/8040/27 QA/8040/41 M/P19494

50 QA/8050/23 QM/8050/25 QA/8050/24 QA/8050/27 QA/8040/41 M/P19495

63 QA/8063/23 QM/8050/25 QA/8063/24 QA/8063/27 QA/8063/41 M/P19496

80 QA/8080/23 QM/8080/25 QA/8080/24 QA/8080/27 QA/8063/41 M/P19497

100 QA/8100/23 QM/8100/25 QA/8100/24 QA/8100/27 QA/8100/41 M/P19498

125 QA/8125/23 QM/8125/25 QA/8125/24 QM/8125/27 QA/8125/41 M/P19499

160 QA/8160/23 QM/8160/25 QA/8160/24 QM/8160/27 QM/8160/41 M/P19679

200 QA/8200/23 QM/8200/25 QA/8200/24 QM/8200/27 QM/8160/41 M/P19683

250 QA/8250/23 QM/8250/25 QA/8250/24 QM/8250/27 - M/P19446

320 QA/8320/23 QM/8320/25 QA/8320/24 QM/8320/27 - M/P19447

Bore F UR Locking Unit (passive)

Guide Block B, G H

32 QM/8025/25 QA/8032/33 QA/8032/59 QA/8032/51/* QA/8032/22 QM/8032/28

40 QM/8040/25 QA/8040/33 QA/8040/59 QA/8040/51/* QA/8040/22 QM/8040/28

50 QM/8050/25 QA/8050/33 QA/8050/59 QA/8050/51/* QA/8050/22 QM/8050/28

63 QM/8050/25 QA/8063/33 QA/8063/59 QA/8063/51/* QA/8063/22 QM/8063/28

80 QM/8080/25 QA/8080/33 QA/8080/59 QA/8080/51/* QA/8080/22 QM/8080/28

100 QM/8100/25 QA/8100/33 QA/8100/59 QA/8100/51/* QA/8100/22 QM/8100/28

125 QM/8125/25 QA/8125/33 QA/8125/59 - QA/8125/22 QM/8125/285

160 QM/8160/25 QA/8160/33 - - QA/8160/22 QM/8160/28

200 QM/8200/25 QA/8200/33 - - QA/8200/22 QM/8200/28

250 QM/8250/25 - - - QA/8250/22 QM/8250/28

320 QM/8320/25 - - - QA/8320/22 QM/8320/28

# For use with switches M/50.• Insert standard stroke length: Ø 12 mm: 50, 100, 160, 200 and 250 mm; Ø 16 to 25 mm: 50, 100, 160, 200, 250, 320, 400 and 500 mmOther stroke length are not available, use nearest standard stroke.

CYL

IND

ER M

OU

NTI

NG

S

REF: 03-1007


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

CYLIN

DER

S

REF: 03-1007

CYLINDERSM/46000, M/46000/M NON-MAGNETIC & MAGNETIC PISTON WITH INTERNAL OR EXTERNAL GUIDE – DOUBLE ACTING 16 - 80MM BORE• A lightweight design extrusion with integral

slots for reed switch mounting.• Large bending moments and lateral forces.• Left hand end cover incorporates alternative

port to allow both air connections to be made at same end.

• Built-in guidance with internal and external options.

TECHNICAL DATAMediumnon-lubricatedOperation: Double acting with adjustable cushioningOperating pressure for basic cylinder: 1 to 10 bar; 1.5 to 10 bar for 16mm diam.Operating pressure for holding brake: 2 to 10 bar for active brake; 5 to 10 bar for passive brakeOperating temperature: -30ºC* to +80ºC.Consult our technical service for use below +2ºCCylinder diameters: 16, 20, 25, 32, 40, 50, 63, 80mmStandard Strokes: Made to order.Maximum Strokes: 16 to 40mm - 8.5m; 50 to 63mm - 7.0m; 80mm - 5.5mMaterials: 16mm - plastic end covers and yoke; 20mm - anodised aluminium end covers and plastic yoke; 25 to 80mm - anodised aluminium end covers and yoke; 16 to 80mm - anodised aluminium carriage, special anodised extruded aluminium alloy cylinder barrel, PU sealing strips and piston seals, plastic cover strips, nitrile rubber or oil resistant plastic seals.

Bore Port Size

Internal Guide Non-magnetic

Magnetic Prec. Roller Guide Non-mgntc

Prec. Roller Guide Magnetic

External Guide Non-magnetic

External Guide Magnetic

16 M5 M/46016/* M/46016/M/* – – M/46116/* M/46116/M/*

20 G1/8 M/46020/* M/46020/M/* – – M/46120/* M/46120/M/*

25 G1/8 M/46025/* M/46025/M/* – M/46225/M/* M/46125/* M/46125/M/*

32 G1/4 M/46032/* M/46032/M/* M/46232/* M/46232/M/* M/46132/* M/46132/M/*

40 G1/4 M/46040/* M/46040/M/* M/46240/* M/46240/M/* M/46140/* M/46140/M/* 50 G3/8 M/46050/* M/46050/M/* – M/46250/M/* M/46150/* M/46150/M/* 63 G1/2 M/46063/* M/46063/M/* – M/46263/M/* M/46163/* M/46163/M/* 80 G1/2 M/46080/* M/46080/M/* – – M/46180/* M/46180/M/* QM/46180/00

MOUNTINGS

Bore C S* UV* V W*** UW***

16 QM/46016/21 QM/46016/37 QM/46016/34 QM/46016/32 QM/46116/35 –

20 QM/46020/21 QM/46020/37 QM/46020/34 QM/46020/32 QM/46120/35 QM/46120/36

25 QM/46025/21 QM/46025/37 QM/46025/34 QM/46025/32 QM/46125/35 QM/46125/36

32 QM/46032/21 QM/46032/37 QM/46032/34 QM/46032/32 QM/46132/35 QM/46132/36

40 QM/46040/21 QM/46032/37 QM/46040/34 QM/46040/32 QM/46140/35 QM/46140/36

50 QM/46050/21 QM/46050/37 QM/46050/34 QM/46050/32 QM/46150/35 QM/46150/36

63 QM/46063/21 QM/46050/37 QM/46063/34 QM/46063/32 QM/46163/35 QM/46163/36

80 QM/46080/21 QM/46080/37 QM/46080/34 QM/46080/32 QM/46180/35 –

* Suitable for internally guided models only, ** Insert stroke length (mm), *** Suitable for external guided models only.

20

PN

EU

MA

TIC

PR

OD

UC

TS

SILENCERS SINTERED BRONZE

Product No. BSPT Male

T40B1800 1/8"

T40B2800 1/4"

T40B3800 3/8"

T40B4800 1/2"

T40B6800 3/4"

EXHAUST PORT SILENCERS PLASTIC

Product No. BSPT Male

M/1545 M5

M/S1 1/8"

M/S2 1/4"

M/S3 3/8"

M/S4 1/2"

M/S6 3/4"

EXHAUST PORT FILTERSProduct No. BSP Male

M/1511 1/8"

M/1512 1/4"

M/1514 1/2"

M/1516 3/4"

M/1518 1"

QUICK EXHAUST VALVESProduct No. BSP Female

S/513 1/4" - 3/8"

S/514 1/2" - 3/4"

Product No. BSP Female

VSR-1/8 1/8"

VSR-1/4 1/4"

VSR-3/8 3/8"

VSR-1/2 1/2"

SHUTTLE VALVESProduct No. BSP Female

T65C1800 1/8"

T65C2800 1/4"

TIME DELAY VALVESProduct No. BSP Female

M/1430 1/8"

Range: 0.2 - 5 sec.

R24/11-824 ‘MICRO-TROL’ REGULATORS

Product No. BSP Female

R24-200-RNLG 1/4"

R24-300-RNLG 3/8"

R24-400-RNLG 1/2"

11-824-043 3/4"

11-824-044 1"

FLOW CONTROL VALVESProduct No. BSP Female

T1000C1800 1/8"

T1000C2800 1/4"

T1000C3800 3/8"

T1000C4800 1/2"

NON-RETURN VALVESProduct No. BSP Female

S/520 1/8"

S/521 1/4"

S/532 3/8"

S/522 1/2"

S/523 3/4"

S/524 1"

PNEUMATIC ACCESSORIES

GAST VACUUM GENERATORS

PNEU

MAT

IC

AC

CES

SOR

IES

REF: 02-1007

Product No. Style Mounting A B C D F Cleats

VG2092 Flat .06" Slip .260 .187 .045 .110 .06

VG2093 Flat .12" Slip .50 .48 .12 .37 .12

VG2094 Bellows .15" Slip .50 .56 .38 .31 .15

VG2095 Bellows .38" Slip 1.0 1.42 .62 .62 .38 Yes

VG2096 Flat .37" Slip 1.0 11.0 .28 .68 .37 Yes

VG2097 Bellows 2.0 11.86 1.12 .75 .25

VG2098 Flat 2.0 .62 .25 1.56 .25 Yes

VG2099 Flat 3.25 1.06 .44 2.25 .375 Yes

VG2100 Bellows 3.31 2.38 2.18 2.38 .375

VG2101 Flat 4.75 1.18 1.0 1.62 .375 Yes


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

TECHNICAL DATAMedium:

corrodecopper alloysOperating Temperature:–20°C* to +60°C*Consult our Technical Service for use below +2°COperating Pressure:0 - 1,6 bar0 - 4 bar

STANDARD PRESSURE GAUGESConnection/Type Pressure Range

(bar)Port Connection Nominal

Diameter†Model Weight kg

Centre back 0 – 1,6 R1/8 50 18-013-010 0,83Centre back 0 – 4 R1/8 50 18-013-011 0,83Centre back 0 – 6 R1/8 50 18-013-012 0,83Centre back 0 –10 R1/8 50 18-013-013 0,83Centre back 0 – 25 R1/8 50 18-013-014 0,83Centre back (min) 0 – 25 40 18-013-905* 0,93Centre back (min) 0 – 25 R1/8 40 18-013-908 0,67Centre back (min) 0 – 10 40 18-013-909* 0,80Centre back (min) 0 – 6 40 18-013-913* 0,21Centre back (min) 0 – 10 R1/8 40 18-013-989 0,05Centre back (min) 0 – 4 R1/8 40 18-013-990 0,05Centre back (min) 0 – 1,6 R1/8 40 18-013-991 0,04Centre back (panel mounted) 0 – 25 G1/8A 62 18-013-992 0,14Centre back (panel mounted) 0 – 10 G1/8A 62 18-013-993 0,13Centre back (panel mounted) 0 – 6 G1/8A 62 18-013-994 0,14Centre back (panel mounted) 0 – 4 G1/8A 62 18-013-995 0,13Centre back (panel mounted) 0 – 1,6 G1/8A 62 18-013-996 0,14Bottom 0 – 1,6 R1/8 50 18-013-024 0,67Bottom 0 – 4 R1/8 50 18-013-025 0,63Bottom 0 – 6 R1/8 50 18-013-026 0,86Bottom 0 – 10 R1/8 50 18-013-027 0,87Bottom 0 – 25 R1/8 50 18-013-028 0,90

†Actual case diameter may exceed nominal diameter by 5 mm.*Stainless steel cases with stainless steel movements for 22 Series range. All stainless steel gauges are not strictly to NACE standard MR-01-75.

NON-STANDARD MODELSFor Pressure Gauges with stainless steel cases and brass movements or other options, please consult our Technical Service.

PRESSURE GAUGES• • Triple calibrated dials: bar, psi and Mpa• Choice of pressure ranges• Can be direct or panel mounted• • Plastic or stainless steel bodies

PNEU

MATIC

A

CC

ESSOR

IES

REF: 02-1007

22

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 78-1007

AIR

LIN

E FI

TTIN

GS

COMBINATION SHUT OFF VALVE, FILTER/REGULATOR AND LUBRICATOR BL92 — 8MM, G1/4

regulator, lubricator with shut off valve regulator, lubricator without shut off valve

Auto Drain Auto Drain

BL92F11D BL92F15D

BL92211G BL92215G

Manual Drain Manual Drain

BL92F31D BL92F35D

BL92231G BL92235G


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

AIR

LINE FITTIN

GS

PATENTED CONNECTION SYSTEM

Connection size connector

with mounting bracket

Threaded connector

with mounting bracket

Threaded connector

without mounting bracket

Quick connector

Shut off valve Porting block Accessories

- - - - 9210-50 9216-51 T40M0500

G1/8 - 9212KIT-1G - - - - -

G1/4 - 9212KIT-2G 9211KIT-2V - - - -

G3/8 - 9212KIT-3G - - - - -

6mm 9213KIT-6D - - - - - -

8mm 9213KIT-8D - - - - - -

10mm 9213KIT-AD - - - - - -

12mm 9213KIT-BD - - - - - -

24

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 78-1007

AIR

LIN

E FI

TTIN

GS

GENERAL PURPOSE FILTER F92G — 8MM, G 1/4

Auto Drain Manual Drain

Service Kit F92G-KITAuto Drain 4000-50R


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

AIR

LINE FITTIN

GS

COALESCING FILTER F92C — 8MM, G 1/4

Auto DrainF92C-8DD-AT1

F92C-2GD-AT1

Service Kit F92C-KITAuto Drain 4000-50R

26

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 78-1007

AIR

LIN

E FI

TTIN

GS

REGULATOR R92G — 8MM, G 1/4

Auto DrainF92G-8DK-RMG

F92G-2GK-RMG

Service Kit R92G-KITR


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

AIR

LINE FITTIN

GS

FILTER/REGULATOR B92G — 8MM, G 1/4

Auto Drain Manual DrainB92G--8DK-AT1-RMG

B92G--2GK-AT1-RMG

Service Kit B92G-KITRAuto Drain 4000-50R

28

PN

EU

MA

TIC

PR

OD

UC

TS

REF: 78-1007

VACUUM GRIPPERS

SUCTION CUP WITH 2½ BELLOWS• • Suitable for level adjustment and for uneven and porous surfaces, such as

corrugated boxes/containers.• The bellows and sealing surface are available in different durometers. This gives

surfaces.•

combines the soft elasticity of rubber with the exceptional wear resistance of polyurethane

• • •

are polyester (PES41/14) and thermo-plastic-urethane (TPE).

TECHNICAL DATADescription Unit Value

Feed pressure max. MPa 0.7

dBA 65-74

Temperature range ºC 10-50

Weight g 88-111

Material 10

RECOMMENDED LOAD WITH BUILT-IN SAFETY FACTOR OF 2 AND RESPONSE TIME, 30º/60º SHORE

Feed Pressure

MPa

Air Consumption & Compressor Power, Continuous Operation

Material to be Handled (see table below)

Recommended Perpendicular load with safety factor 2 N

Recommended Parallel (shear load with safety factor 2 N

Response Time to 50 -kPA with Pi12-2s

Response Time to 50 -kPA with Pi12-3s

0.314 Plywood 16 17

0.314 Corrugated 16 13

0.314 Dry Steel 16 17 0.016 0.015

0.314 Oily Steel 17 5 0.016 0.015

PRINCIPLE OF THE COAX TECHNOLOGYP3010 is based on this new technology, derived from the multi-stage

into the ejector secion. When compressed air (1) passes through the nozzle (2), air is pulled through with the stream of compressed air. "Suction" is thus created at the opening of each stage (3).

Response time varies based on qual-

ity and porosity of handled material

VAC

UU

M G

RIP

PER

S


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

BLO

VAC

PRO

DU

CT

REF: 15-1007

BLOVAC ACCESSORIES

BV22 & BV11 BLOW / VACUUM GUNSWhenever high powered vacuum cleaning or precise air pressure cleaning is

compressed air line to provide the solution to a wide variety of industrial clean up problems.

powders, paper and textile trimmings, plastic pellets and any granulated

for blow cleaning machine tools such as lathes, drills, milling machines, power saws etc. The BV22 and BV11 hand guns can also be used to provide cooling for a number of industrial and manufacturing processes. Also as an

no problem with electrical or mechanical breakdowns because they’re air powered.

Product No. BV11 11mm

Product No. BV22 22mm

BV22 D/H & BV11 D/H BLOW / VACUUM GUNSThe BV22 D/H and BV11 D/H air cleaning guns were designed purely with eye safety in mind. Currently industry uses conventional blow guns to remove metal chips and the like from dead end holes, the end result being that the chips are virtually moved from hole to hole and not removed completely. Whilst the Deep Hole Guns (BV22 D/H and BV11 D/H) were designed to blow the chips up and vacuum them away simultaneously.

These Deep Hole Guns were conceived from consumer needs and are ideal for production line situations, eg. engine blocks, gearboxes, components etc. Already they are used in automotive manufacturing plants, aircraft manufacturing, and general engineering throughout the world. Both of these products are made from

metal chips and other similar particles to be conveyed over long distances.

Product No. BV11 D/H 11mm

Product No. BV22 D/H 22mm

AP22 & AP11 AIR PUMPS

from around working machinery by vacuum recovery, or high powered air blasting. Unlike conventional air movers, the AP22 and AP11 Air Pumps develop high air moving capabilities from a minimum air input, using a

horizontal conveying distances.

resistant to most chemicals, and because of their smooth bore construction, ensures you of no residue contamination from previously conveyed products.

metal chips, breadcrumbs, residue, paper and textile trimmings etc. and will convey

in a blow mode for cleaning down tools such as lathes, drilling machines, milling machines, power saws. etc.

Product No. AP11 11mm

Product No. AP22 22mm

ACCESSORIESProduct No. Description

BV22-1 Dust Bag

BV22-2 Vacuum Head

BV22-3 Long Reach Wand

BV22-5 Crevice Tool

BV22-6 Round Brush

BV22-7

EOLOSL032 32mm Conveying Hose (BV22-8)

30

PN

EU

MA

TIC

PR

OD

UC

TS

BLO

VAC

PR

OD

UC

T

REF: 15-1007

BLOVAC ACCESSORIES

DRAGIN PUMP KIT DPK200

are angled in such a way as to create a Vortex principle, thus creating the vacuum. Due to the angle of the Venturi jets, air is exhausted in a spiral form enabling material to be conveyed via smooth bore hose or pipe downstream.

convey such items as: pharmaceutical powders, plastic pellets, food products, grains, metal objects, fumes, paper and textile trimmings, broken glass, coins, coil springs and more.

In a blow mode these Air Pumps can be used to provide cooling for a number of industrial and manufacturing processes. Also for blowing down machinery, or even as an aid to combustion.

Size available: 38mm, 50mm, 75mm

AIR TUBESRanging in sizes from 6mm through to 75mm bore sizes, the AIR TUBES were primarily designed for removal/extraction and conveying of harmful, noxious fumes and other pollutants.

removing and extracting a vast range of fumes in welding applications and the like.

materials from one place to another. The AIR TUBES will convey textiles, granules, pellets, capsules, lint, dust, metal chips, small parts, powders, and more.

electronic controls, cooling furnaces, moulded parts, castings, electric motors and bearings, or pneumatically controlled as part of a machine cycle.

constructed from a durable aluminium alloy and anodised in matt black.

Sizes available: 6mm - 75mm

BLUCAP KIT

or dispose of your industry’s waste products. BLUCAP drum cover is a versatile compressed air operated, industrial cleaning system. Which was ideally designed for the vacuum clean-up of such substances as: metal chips, oil absorbents, sawdust, ceramic dust, and more.

workshop cleaning problems. Also being constructed of a high grade poplin material, and working from compressed air, means no mechanical breakdowns and little to no maintenance.

All kits come complete with BLUCAP to suit appropriate drum and as follows

BCK-1 x BV22 Blow/Vacuum Gun

BCK-1 x BV22-3 Longreach Wans

BCK-1 x BV22-5 Crevise Tool

BCK-1 x BV22-2 Vacuum Head

BCK-1 x BV22-6 Round Brush

3m x BV22-8 Conveying Hose

BCK 20 20L Blue Caps

BCK 60 60L Blue Caps

BCK205 205L Blue Caps


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS

BLOVAC VACUUM KITEach kit contains the following:1 x BV22 High Powered Gun1 x BV22-1 Dust Bag including Hose Clamp1 x BV22-5 Crevice ToolProduct No. BV22-BVK Kit as above

BLOVAC TEXTILE & ELECTRONICS KIT

electronics/computers.Each kit contains the following:1 x BV11 High Powered Gun1 x BV11-1 Dust Bag including Hose Clamp1 x BV11-2 1 x BV11-31 x BV11-4Product No. BV11-K Kit as above

MOBI-PUMP

Powered by compressed air to generate a small pressure differential between the

• Mobi-Pump• • Telescopic drum spear• Two metres of 5mm anti-static hose with Camlock connection• Dispensing nozzle.

Product No. MPK100

BLOVAC ACCESSORIES

DRAGIN PUMP KIT DPK200

to all your sump cleaning problems. It’s small

oil, used oil waste coolants ... even sludge... so fast you will be amazed.

This versatile and inexpensive product will run on compressed air as low as 9.5 cfm and is coupled with a design featuring no moving

waste solution travelling through the actual pump, it comes with a three year warranty.

The Dragin Pump waste recovery unit will connect simply to a standard 44 gallon/

from: lathes, milling machines, EDM, surface grinders, sumps, open pits, and more.

coolants, metal chips, used oil, solvents, sludge, hydraulic oil, tramp oil etc. Giving your Company the edge over those environmentally hazardous substances.

Note: The kit does not include hose.

Product No. DPK200

BLO

VAC

PRO

DU

CT

REF: 15-1007

32

PN

EU

MA

TIC

PR

OD

UC

TS

PRESSURE PIPE SYSTEMPR

ESSU

RE

PI

PE S

YSTE

M ISO 9001-2000

Colour Identifi able highperformance pressure pipe system

� cellence in performanceP I P E S Y S T E M S

Coloured “BEIGE” to identify the contents for Gas, Gas-Pro® is intended for use with Inert Gases such

as Argon, Helium, Nitrogen, Carbon Dioxide and Shielding Gas Mixtures for welding applications.

Gas-Pro®

Coloured “VIOLET” to identify the contents for “Acids & Alkalis”. This is the system for conveying

most types of acids & alkalines ( please refer to our chemical resistance chart for suitability).

Chem-Pro®

Coloured “BROWN” to identify the contents for “Oils”. This is the system for conveying most types of oils, including animal, mineral, vegetable and synthetic. Oil-Pro®

Coloured “RED” to identify the contents for Fire Services, this is the system for conveying water to

fire fighting equipment such as Hose Reels. Fire-Pro®

Coloured “BLACK” to identify the contents for “Waste Products”. This is the system for conveying

various types of waste products, including, sewage, organic, chemical and process waste.

Waste-Pro®

Coloured “BLUE” to identify the contents for Compressed Air and Vacuum. Air-Pro®

Coloured “GREEN” to identify the contents for Water. Water-Pro® is intended for the conveyance

of Cooling Water, Waste Water, Hot Water and Discharge Water.

Water-Pro®


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS


ESSUR

E PIPE SYSTEM

� cellence in performancePI

PE

S

YS

TE

MS

Oil-Pro

®

For conveying most typ

es of oils.

Typical Factory Layout

Gas-Pro

®

Coloured “b

eige” it is intended for use with

inert gases such as Arg

on

, Heliu

m, N

itrog

en,

Carb

on

Dioxid

e and Shield

ing

Gas M

ixtures for

welding A

pp

lications.

Air-Pro

®

Can b

e attached directly to m

achinery without concern from

vib

rating stress.

The advantage of having a Pro-Pipe II ® System

is

that it allows you to b

ranch into the system

with m

inimum

downtim

e. Branch lines can

be installed in the m

orning when you’re

equipm

ent turns up.

CalA

ir’s expertise w

ill advise on how to set up

comp

ressor rooms.

Having a dryer w

ith a pre-filter and after-filter is a step

in the

right direction to contaminated free com

pressed air w

hich in

turns provide less dollars sp

ent in servicing costs.

Air-Pro

®

Air-Pro

®

Coloured “VIO

LET” to identify the

contents for “Acid

s & A

lkalis”. W

ith its high chemical resistance

is intended for use with m

any

types of chem

icals.

Chem

-Pro®

Waste-Pro

®

Coloured “b

lack” to identify the contents

for Waste Services.

Water-Pro

®

Coloured “green” it has Excellen

t th

ermal p

rop

erties which offer

distinct advantages when used for chilled

water.

Water-Pro

®

Coloured “green” it is intended for the

conveyance of Co

olin

g W

ater, Waste

Water and D

ischarg

e Water.

Coloured “RED

” to identify the contents

of Fire Services.

Fire-Pro®

ISO 9001-2000

34

PN

EU

MA

TIC

PR

OD

UC

TS


ESSU

RE

PI

PE S

YSTE

M

Joining MethodsThe Pro-Pipe II compression range can be used to extend existing pipe

work of steel or copper and to connect to ancillary equipment such as fi lters/regulators and quick connectors.These items can simply be screwed into the relevent fi tting which is threaded BSP. An airtight seal is provided by an ‘O’-Ring within the fi tting which is maintained even in defl ected angles of up to 30 deg. Pullout is prevented by a grip-ring which bites into the pipe.

The use of Calair Support Clips are highly recommended as they will considerably speed up installation and provide a positive method of location, they will also assist in the removal of pipe for modifi cation.

No expensive skilled labour is needed for installation, reconfi guring or recycling of the Pro-Pipe II compression range - just simple ring wrenches, used by normal factory labour after minutes of training. They can be quickly and easily demounted for changes to reticulation systems as plant needs change.


The Pro-Pipe II socket fusion range features the same clean, low-friction and non-corrosive qualities of the compression fi ttings range, which are valued in a huge number of applications because they are far easier and faster to erect than alternative systems.The socket fusion range of fi ttings are offered as a low-cost permanent alternative to the standard range of compression fi ttings.

The socket fusion joint system is assembled using electric socket fusion welders. The standard socket fusion threaded joints are made from Nickel plated Brass however for chemically aggressive enviroments we can offer these fi ttings made from 316 Stainless Steel.

Our socket fusion products which complements our internationally successful compression fi tting systems - is designed to provide another dimension to the CalAir product range. This will enable users to select the ideal CalAir jointing system most suited and most cost-effective for their ongoing needs.

Compression Fittings

Socket Fusion Fittings

ISO 9001-2000

Lloyd’s Register, has conducted a design appraisal of the Pro-Pipe II pipes and fittings. The appraisal states that the Pro-Pipe II pipes and fittings are suitable for use in industrial, marine and offshore non-essential services for water, inert gases, compressed air and non-flammable liquids and electrical conduit . The appraisal also states that the pipes and fittings can be considered for use in these systems for projects where

ASME B31.3 “Process Piping” AS4041 “Pressure Pipe”

are specified.

subject to the ratings given in the manufacturer’s instructions.

TechnicalU.V. Stabilisation 50years

Max. Working Pressure at 20°C 320psi

Max. Working Pressure at 60°C 150psi

Max. Working Temp. 100°C

Min. Working Temp. -20°C

Hardness Shore D 60

Charpy Impact at 23°C 65kj/m²

Charpy Impact at -20°C 7kj/m²

Thermal conductivity at 20°C W/m K 0.24

Co-effi cient of thermal expansion 0.15mm/m/°C


E & O.E 2007

PN

EU

MA

TIC

PR

OD

UC

TS


ESSUR

E PIPE SYSTEM

ISO 9001-2000


Rather than needing skilled labour to integrate

expensive and time-consuming alterations, the Pro-Pipe

II® system can be quickly and conveniently changed.

There has been no problem with it at all. We haven’t had

to touch it in the four years that it has been installed

Robert Marchese, Rosemount Estate Wines

Steven van Winckel, HSV Production Engineer

We like the flexibility and we like the fact that the

polymer system can be rapidly reconfigured without having

to call in the specialised labour needed to cut down and

reconstruct metal reticulation systems – often at considerable

expense and with considerable time losses.

MOBILE HOSE REPLACEMENT & REPAIR 24/7

proprietary limited pneumatic products · 2021. 5. 12. · industrial hydraulics ducting pneumatics...

Documents