proposals the review of the 1958 agreement and the introduction of international whole vehicle type...
TRANSCRIPT
PROPOSALS THE REVIEW OF THE 1958
AGREEMENT AND
THE INTRODUCTION OF INTERNATIONAL WHOLE VEHICLE
TYPE APPROVAL (IWVTA)
IWVTA Informal Group
WP29 155th SessionNovember 15, 2011
1
Transmitted by the representative of Japan
Informal document WP.29-155-32
(155th WP.29, 15 - 18 November 2011, agenda item 4.2)
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement : Quality Assurance of type approval
2. UN Regulation No.0 Concept
3. Guideline for each GR to review technical regulations applicable to IWVTA
2
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement : Quality Assurance of type approval
2. UN Regulation No.0 Concept
3. Guideline for each GR to review technical regulations applicable to IWVTA
3
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
criteria for establishing of new Regulations
possibility of including alternatives in the technical requirements
criteria for amending existing Regulations
possibility of including the existing requirements as an alternative
procedure for voting, notification, objection and entry into force
possibility for a Contracting Party to object or to disagree
accelerated adoption procedure ?
4
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
high quality and unambiguous texts
guarantee an acceptable level of safety, environmental protection or energy performance
problems of interpretation of existing Regulations
appropriate to maintain reference to other administrative procedures alternative to type-approval (such a self-certification)?
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
5
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
procedures to be followed with respect to conducting type approval
include provisions governing the main principles to be applied for the application for type approval
type-approval shall be based on demonstration of compliance by means of appropriate tests
principle of worst casing
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
6
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
provisions on type-approval documentation
minimum information to be provided in the test report
provisions enabling self-testing and virtual testing
provisions to deal with new technologies
enhance procedures for ensuring conformity of production
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
7
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
re-assessment of the rights and obligations for Contracting Parties arising from an adopted Regulation or amendment to an existing Regulation
conditions necessary for granting type approval
amendments to type-approvals, refusal or withdrawal of type-approvals, conditions for their validity
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
8
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
clarify and specify the rights and obligations of manufacturers
consider the introduction of a certificate of conformity
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
9
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
clarify role and responsibilities of technical services,
Specify criteria for the assessment of their competence and their designation
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
10
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement
market surveillance provisions
Quality Assurance of type approval
Process for Rule Making
Process for Rule Making
Process for Type Approval
Process for Type Approval
Rights and Obligations of Technical Service
Rights and Obligations of Technical Service
Implementation and Enforcement Issue
Implementation and Enforcement Issue
Rights and Obligations of Manufacturers
Rights and Obligations of Manufacturers
… etc
Rights and Obligations of CP
Rights and Obligations of CP
11
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement : - Quality Assurance of type approval -
2. UN Regulation No.0 Concept
3. Guideline for each GR to review technical regulations applicable to IWVTA
12
Basic idea is to establish IWVTA under 58 agreement
-IWVTA should be established in line with the principle of the current 58 agreement, i.e.: "the CPs can choose the UN Regulations they apply"
-Consequently, the new concept of "the Regulation on IWVTA" was proposed as “UN Regulation No.0".
2. UN Regulation No.0 Concept
13
Envisioned new structure for the revised 1958 Agreement
Appendices
Text of the 1958 Agreement (amended)
ANNEX (Regulations) - Addendum to 1958 AgreementNo.0 IWVTA : Vehicle approval requirements (New UN Regulation)
No.126 ……..
.…
Appendix 1 Composition and Rules of Procedure of the Administrative Committee (amended)
Appendix 2 Conformity of Production Procedure (amended)
Placeholder Procedure for Type Approval〔(R.E.3) Annex 7 (amended)〕
No.1 ……..
Relevant elements of WP29/1059 or later revisionRelevant elements of WP29/1044 or later revision
2. UN Regulation No.0 Concept
14
1. New requirements for whole vehicle type approval are established. (To include the “necessary IWVTA elements” proposed to WP29 by Japan.)
2. Contracting Parties to the 1958 Agreement (hereafter “Contracting Parties”) can select to adopt UN Regulation No.0.
3. A Contracting Party who has adopted UN Regulation No.0 (hereafter “UN R0 contracting party”) accepts and issues the UN R0 approvals (pursuant to Article 2 of the 1958 Agreement).
4. The UN R0 contracting party continue to be allowed to accept and issue individual UN Regulation approval (pursuant to Article 2 of the 1958 Agreement).
5. Issue of additional requirements or specifics to be further evaluated
6. Once UN R0 is adopted by a Contracting Party, all the UN Regulations in the List of necessary UN regulations also are adopted simultaneously (no additional procedure) by the Contracting Party (but only for the case of M1 vehicles).
7. Once an UN R0 approval is obtained, it shall be unnecessary to obtain and affix each individual UN type approval mark (Vehicle system approval only).
Principle of UN Regulation N0.02. UN Regulation No.0 Concept
15
1. Items to be addressed for the future direction of harmonisation of vehicle regulations under the 1958 Agreement : - Quality Assurance of type approval -
2. UN Regulation No.0 Concept
3. Guideline for each GR to review technical regulations applicable to IWVTA
16
Step 0
* Approve the candidate of technical regulation items applicable to IWVTA
* Propose the candidate of technical regulation items applicable to IWVTA
* Request GR to review candidate of technical regulation items applicable to IWVTA
* Check points to be examined* Make a plan to review candidate of technical regulation items applicable to IWVTA
•Correspondent UN Regulation: present …To Step 1•Correspondent UN Regulation: absent …To Step 2
3. Guideline for each GR to review technical regulations applicable to IWVTA Regulation No.0 Concept
17
Step 1
(iv) Need to separate M1 or not?
*Examine and finalize the amended regulation
(i) Need to splitor not
(iii) Can be Unified or not?
(iv) Need to separate M1 or not?
Y / Nto report
to ask guidance
to report
to ask guidance
to ask guidanceY
Y
Y / N
Y
Y
N
Y
N
N
at least one "Yes"
To regular discussion at WP.29
18
Step 2
* Appoint the proponent to draft a new regulation
* Draft a new regulation (with justification)
* Examine and finalize the drafted new regulation
To regular discussion at WP.29
19