proposal for hy grip waterproofing membrane for nishat jsc working
TRANSCRIPT
1
JOINT SEALING COMPOUND WATERPROOFING TREATMENT
EMPORIUM MALL LAHORE
2
SLIDE SEQUENCE
1. Company Profile 2. Installation & Benefit 3. ISO Certificate4. Material Safety Data Sheet HY GRIP
PRIMER5. Material Safety Data Sheet Joint Sealing
Compound
3
Company Profile (PHOL)Pak Hy-Oils Limited (PHOL) was established in 1974 in the public sector as an ancillary unit ofNational Refinery Limited by PERAC Government of Pakistan to produce value added downstreamproduct of oil refining.
1. APP / SBS based Modified Bituminous Waterproofing Membrane (HY GRIP),2. Specialty Asphalts (Tack Coat, Prime Coat, Joint Sealing Compound, Etc.)3. Asphalts Emulsions (Water based for Dam Proofing)4. Polymer Modified Asphalt5. Oils and Lubricants (BLACK TIGER)6. Transformer Oils (HY TRANS)
Under the privatization program of Government of Pakistan. PHOL was handed over to theGharibwal Group. Gharibwal is a well established and reputed multinational business group engagedin Oil business since 1981 and has a strong presence in Nigeria, England and many other countries.Our Group owns “GHARIBWAL CEMENT LIMITED, BALOUCHISTAN GLASS LIMITED & PAK HYOILS LIMITED”
Quality Management System of PHOL is certified under ISO 9001:2008 InternationalStandard and is verified by third party auditors M/s SGS. Pak HY-Oils Limited is leader in most of
thesegments that it operates and enjoys good reputation among its customers and supplier.
4
Hot Melt Compound Waterproofing System
JOINT SEALING COMPOUND Coating and then structure will remain same
JOINT SEALING COMPOUND Coating
SPECIAL POLYESTER
JOINT SEALING COMPOUND Coating
HY-GRIP PRIMER
SPECIAL POLYESTER
Concrete Floor
5
Format of Installation
• 1st Layer All concrete pours are filled with the Hy-Grip Primer and this primer also acts as an anti root waterproofing system.
• 2nd Layer Apply 1st coat directly on the primer,
• 3rd Layer Apply polyester direct on the coat of JSC • 4th Layer Then again apply coat of JSC
• 5th Layer Then again Polyester applied same as 3rd layer
• 6th LayerFinally apply last coat of JSC on the final polyester and then the sturcture design will remain
same.
.
6
Product Benefits1. The system is hot applied which yields high
plasticity and synthetic rubber based modified bitumen make the coat more flexible and high waterproofing of structure.
2. We produce as ISO:9001 certified company and we test our each production and keep the samples of each production to maintain quality products.
3. Excellent resistance for water4. The life of the waterproofing system would jibe
with the life of structure once it is fully covered with concrete.
7
ISO Certificate
8
9
10
Thank youNabeel Alvi Manager Sales & Marketing PAK HY OILS LIMITEDCoporate Office: 3rd floor Dime Centre KarachiPlant Address: Korangi Industrial KarachiCompany Profile Daily motion Link:http://www.dailymotion.com/video/x2hyvua_pak-hy-oils-limited-plant_techCompany Website: www.pakhyoils.com