property observer
DESCRIPTION
property observerTRANSCRIPT
-
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
20 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 21
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
22 ProPerty observer
cover story
Developer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 23
cover story
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
24 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 25
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
26 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 27
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
28 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 29
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
30 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 31
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
32 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 33
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
34 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
ProPerty observer 35
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
36 ProPerty observer
cover story
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 37
cover story
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
cover story
38 ProPerty observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 39
cover story
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
42 ProPerty observer
The urbane rich are discovering pleasure in the lap of luxury homes.
by Asad Waseem
luxury homescATching up !
luxury living
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 43
luxury living
An external view of home for the super rich
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
44 ProPerty observer
luxury living
Luxury homes offer world class interiors
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 45
luxury living
Royal signature is visible in the soul of luxury homes
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
56 ProPerty observer
luxury living
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 57
luxury living
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
58 ProPerty observer
luxury living
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 59
luxury living
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
62 property observer62 property observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
property observer 63
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
64 property observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
property observer 65
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
66 property observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
property observer 67
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
68 property observer
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
economy & policy
property observer 69
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
118 ProPerty observer
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 119
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
120 ProPerty observer
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 121
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
122 ProPerty observer
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 123
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
124 ProPerty observer
water
air
Fire
eartH
Space
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
ProPerty observer 125
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes
Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: noCMM for overprinting CMYK graphic: yesGray Image: Apply CMYK Profile: noGray Graphic: Apply CMYK Profile: noTreat Calibrated RGB as Device RGB: noTreat Calibrated Gray as Device Gray: yesRemove embedded non-CMYK Profiles: noRemove embedded CMYK Profiles: yes
Applied Miscellaneous Settings:Colors to knockout: yesGray to knockout: noPure black to overprint: noTurn Overprint CMYK White to Knockout: yesTurn Overprinting Device Gray to K: yesCMYK Overprint mode: set to OPM1 if not setCreate "All" from 4x100% CMYK: yesDelete "All" Colors: noConvert "All" to K: no
-
126 ProPerty observer
Mahavastu
Prinect Color EditorPage is color controlled with Prinect Color Editor 4.0.70Copyright 2008 Heidelberger Druckmaschinen AGhttp://www.heidelberg.com
You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer.
Applied Color Management Settings:Output Intent (Press Profile): ISOcoated_v2_eci.icc
RGB Image:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
RGB Graphic:Profile: eciRGB.iccRendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent RGB/Lab Graphic:Rendering Intent: PerceptualBlack Point Compensation: no
Device Independent CMYK/Gray Image:Rendering Intent: PerceptualBlack Point Compensation: no
Device Indepe