The first thing that you have to do is to attach the j-bracket with your tripod. Sometimes the tripods screw may not be long enough. You can simply push the screw through no those occasions. If that doesn't work then simply get a longer round head screw.

THE THIRD STEP INVOLVES OPENING THE PROMPTER AND ATTACHING SOME METAL SUPPORT. DO THIS BY SIMPLY INSERTING AN END INTO A HOLE ON THE SIDE OF THE GLASS. THE OTHER END WILL GO INTO THE PLATFORM. THE HOLES MAY NOT ALIGN BUT DON'T WORRY AS THAT IS PART OF THE PLAN.

AFTER THIS YOU NEED TO TAKE THE IPAD AND PUT IT ONTO THE PLATFORM OF THE PROMPTER. IF YOU HAVE A COVER ON THE IPAD, REMEMBER TO TAKE IT OFF BEFORE YOU DO THIS. YOU WILL SEE THAT PUTTING THE IPAD RIGHT AT THE BACK OF THE PLATFORM GIVES THE BEST VIEWING EXPERIENCE OF THE IMAGE THAT IS PROJECTED.

PUT THE BLACK CAPE ONTO THE IPAD PROMPTER BY SIMPLY LINING THEIR VELCRO TABS WITH THE SIDES OF THE IPAD PROMPTER.