APPLICATIONS ■ ESP applications (456 and 562 series

motors) with flow rates from 200 to 28,000 bbl/d [30 to 4,450 m3/d]

■ Production optimization programs ■ Low-ambient-temperature installations

(Canada, Alaska, Siberia)

BENEFITS ■ Simplifies installation, reducing costs

and NPT ■ Improves pump operation and reliability

to reduce early ESP failures and extend run life

FEATURES ■ Factory prefilled and preshimmed

system ■ Integrated protector assembly ■ Plug-and-play connection of the pothead to

the motor with the new MaxLok* ESP quick-plug motor lead extension

■ Integrated Phoenix* artificial lift downhole monitoring system sensor

The multifunctional ProMotor* integrated ESP motor, protector, and sensor unit is compatible with all standard REDA* ESP system pumps, intakes, and gas-handling devices. The ProMotor unit is available in both 456 and 562 series with a wide range of power (25 to 675 hp) for use with pump systems rated from 200 to 28,000 bbl/d [30 to 4,450 m3/d].

Operating efficiencyThe ProMotor unit simplifies wellsite assembly, avoiding common operational and equipment problems. The unit is prefilled in a controlled manufacturing environment and features an innovative, plug-and-play design. The ease of installation helps save costly rig time.

The integrated Phoenix system sensor in the ProMotor unit measures downhole pressures, temperatures, and equipment vibrations. These real-time measurements can be used to improve pump performance, increase production, and anticipate production problems. Petroleum engineering analysis can be applied to better understand the well’s production potential.

Combined with the LiftWatcher* real-time surveillance service, operators can proactively enhance their ESP operations to improve production and equipment run life.

ProMotorIntegrated ESP motor, protector, and sensor unit

ProMotor integrated ESP motor, protector, and sensor unit.

slb.com/al

ProMotor

*Mark of SchlumbergerCopyright © 2015 Schlumberger. All rights reserved. 15-AL-67804

ProMotor Integrated Motor, Protector, and Sensor Unit Specifications387 and 456 series 540 and 562 series

Casing OD, in [mm] 5.5 [146] 7 [178]

Oil-filling process Factory filled with REDA system oil No. 5. (no oil servicing required at wellsite)

Factory filled with REDA system oil No. 5. (no oil servicing required at wellsite)

Motor type Variable rating motor Variable rating motor

Operating frequency, Hz 30 to 90 30 to 90

Max. winding operating temperature, degF [degC] 400 [204] 400 [204]

Single section power range, hp at 60 Hz 30 to 225 37.5 to 337.5

Tandem ProMotor max. power, hp at 60 Hz 450 675

Configuration Single and tandem Single and tandem

Max. OD, in [mm] 4.56 [115.8] 5.62 [142.7]

Integral protector chamber configuration† BSL, BPBSL, LSBPB BSL, BPBSL

Metallurgy‡ Carbon steel Carbon steel

Intermediate radial bearings Self-lubricating, polymer-lined Self-lubricating, polymer-lined

Top radial bearing ARZ* abrasion-resistant zirconium ARZ zirconium

Rotor bearings Spring-loaded key with self-lubricating, polymer-lined bushing

Spring-loaded key with self-lubricating, polymer-lined bushing

† B= Elastomer-bag; modular protector design that provides a positive seal against well fluid.

S= Series; two modular protectors are connected in series.

L= Labyrinth; modular protector design.

P= Parallel; two modular protector seals are connected in parallel.

Other configurations may be available upon request.

‡ Other material available upon request.