projekt w Systeme aus Stahl GmbH

Geseker Stra e 36

33154 Salzkotten

Germany

Telephone +49 5258 9828-0 Telefax +49 5258 9828-28 info@projekt-w.de www.projekt-w.com

The draft is the intellectual property of projekt w - Systeme aus Stahl GmbH and is copyright protected. It is prohibited to duplicate or distribute the draft to third parties without express permission. Violations shall be subject to claims for compensation.

Data sheet

We reserve the right to make technical amendments. Status 20.02.2017(ID00)

DE/en 200 - INTEGRA 943INTEGRA safety barrier

Technical data:

Dimensions: INTEGRA 943

Mesh size: 50 x 100/200 mm

Max. element width: 5506 mm

Cut in the grid of 50 mm

Material: Steel S235

fastening flange S355

Surface: Hot-dip galvanised in accordance with EN ISO 1461

Optional: Powder-coating

Dynamic impact in accordance with EN 1991-1-7

Case example with car 10km/h and 2.5t:

Mat length: 4706 mm Deflection: 400 mm Connecting forces: 36 kN per conn.

More INTEGRA Data sheets:

DE/en 201 - Drill template system heights 973

DE/en 202 - Drill template system heights 1000

DE/en 203 - Support twist DE/en 204 - Centre-axis ramp DE/en 205 - Installation details DE/en 206 - Calculation 0 % - 4 %DE/en 207 - Calculation 4 % -10 %DE/en 208 - Calculation 10 % - 16 %DE/en 212 - Fastening set

Scope of supplyINTEGRA fastening set comprising:

Max. element width (W) = 5506

94

3

55

Customer-supplied support profile, e.g. HEA

INTEGRA as impact- and fall protection

- 4x INTEGRA crest- 4x INTEGRA fastening flange- 4x INTEGRA counter flange- 4x hexagonal bolt ISO 4017 - M16x45- 8.8 - FZ

incl. nut and washer- 12x hexagonal bolt ISO 4017 - M10x35 - 8.8 - FZ

incl. nut and washer

German Approval