project : supply and installation of ventilation …
TRANSCRIPT
PROJECT : SUPPLY AND INSTALLATION OF VENTILATION SYSTEM
AND MISCELLANEOUS WORKS
LOCATION : College of Dentistry
University of the Philippines Manila
SUBJECT : BIDFORM
1.00 GENERAL REQUIREMENTS
Mobilization and Demobilization 1.00 lot
Scaffolding, warehouse, board ups, canvass/temporary covering and
safety signages
1.00 lot
Permits and Clearances 1.00 lot
Health and Safety ( PPE, Medkit, Medical check-up/testing as required
for new normal etc.)
1.00 lot
TOTAL GENERAL REQUIREMENTS
2.00 ARCHITECTURAL WORKS
PROSTHODONIC CLINIC
3.56 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions)) complete with
fixing accessories and additional supports including installation cost
2.00 set/s
1.85m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
5.00 set/s
1.80 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
3.00 set/s
1.75 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
8.00 set/s
Sub Total Cost
ORTHO CLINIC
6.13 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 3 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
3.60 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
3.52 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
2.00 set/s
ITEM DESCRIPTION QTY. UNIT UNIT COST TOTAL COST
BID FORM 1 of 26
1.74 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
10.00 set/s
Sub Total Cost
RESTORATIVE CLINIC
6.7 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 3 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
3.63 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
3.00 set/s
3.52 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
2.11 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
3.00 set/s
1.78 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
4.00 set/s
1.74 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
13.00 set/s
Sub Total Cost
ORAL MEDICAL CLINIC
4.97 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 3 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
3.60 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
2.00 set/s
3.52 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
3.34 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
2.99 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
2.87 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
2.65 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame (in 2 panels aligned with boundary/divisions) complete with
fixing accessories and additional supports.
1.00 set/s
2.13 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
3.00 set/s
1.74 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
16.00 set/s
1.70 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
1.00 set/s
1.13 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
1.00 set/s
Sub Total Cost
BID FORM 2 of 26
OS CLINIC
2.14 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
2.00 set/s
1.74 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
6.00 set/s
Sub Total Cost
CLINIC
1.74 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
3.00 set/s
1.19 m x 0.6m x 6mm thick tempered clear glass on aluminum anonized
frame complete with fixing accessories and additional supports.
1.00 set/s
Sub Total Cost
Restoration of architectural, electrical, plumbing and other trade affected
in the installation process of ducting, airconditions, exhaust, electrical
and the architecural works of the project.
1.00 lot
Demolition and dismantling of ceiling and removal of existing
decommissioned ducting
1.00 lot
Supply and installation of 1/2" thick gypsum board drop ceiling to
traverse duct across beam including painting
1.00 lot
Additional double panel metal louver door including demolition of CHB
wall and locking accessories for Gen Set Room
1.00 set
Sub Total Cost
TOTAL ARCHITECTURAL WORKS
3.00 AIRCONDITIONING SYSTEM
BIO-CHEM LABORATORY/PRE-CLINICAL LABORATORY
Equipment
2.5HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit/s
4.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
2.00 unit/s
5.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit/s
Copper pipe and fittings
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 10.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 10.00 length
Rubber Insulation Ø5/8" x 3/4" x 6' 34.00 pc/s
Rubber Insulation Ø3/8" x 3/4" x 6' 34.00 pc/s
Polyethylene Tape 4.00 roll/s
Copper elbow Ø3/8" LR 24.00 pc/s
Copper elbow Ø5/8" LR 24.00 pc/s
Copper coupling Ø3/8" 10.00 pc/s
Copper coupling Ø5/8" 10.00 pc/s
BID FORM 3 of 26
Condensate Drain
PVC Pipe Ø3/4" x 10' 12.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 20.00 pc/s
PVC elbow Ø3/4" 12.00 pc/s
PVC tee reducer Ø3/4" x 2" x 2" 2.00 pc/s
PVC tee Ø3/4" 4.00 pc/s
PVC tee Ø3/4" (threaded) 4.00 pc/s
PVC coupling Ø3/4" 4.00 pc/s
PVC end plug Ø3/4" 4.00 pc/s
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 4.00 length
Full thread rod Ø3/8" 47.00 length
Grip anchor Ø3/8" (50pcs/box) 2.25 box/es
Nuts and washer Ø3/8" 72.00 pc/s
Bolts and nuts Ø3/8" 16.00 pc/s
Loop hanger Ø3" 94.00 pc/s
C-clamp 3" w tox and screw 8.00 pc/s
Spring isolator 16.00 pc/s
Secondary drain pan
GI Sheet GA 22 4.00 sheet/s
Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll/s
Consumables
Refrigerant R410a 2.00 tank/s
Nitrogen 2.00 tank/s
R-141B 4.00 can/s
Mapp gas 4.00 tank/s
Silfus Rod 16.00 pc/s
Polyethylene tape 4.00 roll/s
Aerotape 4.00 roll/s
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc/s
Rubber pad 1/2" thick x 2" x 2" 16.00 pc/s
Rugby 1.00 gal
Solvent 3.00 can/s
Electrical Tape 4.00 pc/s
Welding Rod 4.00 kg/s
Rugs 12.00 pc/s
Sub Total Cost
PROSTHO LABORATORY/PROSTHODONTIC CLINIC
Equipment
2.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 1/60/220, with wired controller
1.00 unit/s
5.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit/s
6.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit/s
Copper pipe and fittings
Copper Pipe Ø1/2" Hard Drawn Type L, 20' 3.00 length
Copper Pipe Ø1/4" Hard Drawn Type L, 20' 3.00 length
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 6.00 length
BID FORM 4 of 26
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 6.00 length
Rubber Insulation Ø1/2" x 3/4" x 6' 10.00 pc/s
Rubber Insulation Ø1/4" x 3/4" x 6' 10.00 pc/s
Rubber Insulation Ø5/8" x 3/4" x 6' 20.00 pc/s
Rubber Insulation Ø3/8" x 3/4" x 6' 20.00 pc/s
Polyethylene Tape 4.00 roll/s
Copper elbow Ø1/2" LR 14.00 pc/s
Copper elbow Ø1/4" LR 14.00 pc/s
Copper elbow Ø3/8" LR 18.00 pc/s
Copper elbow Ø5/8" LR 18.00 pc/s
Copper coupling Ø1/2" 9.00 pc/s
Copper coupling Ø1/4" 9.00 pc/s
Copper coupling Ø3/8" 9.00 pc/s
Copper coupling Ø5/8" 9.00 pc/s
Condensate Drain
PVC Pipe Ø3/4" x 10' 6.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 6.00 pcs
PVC elbow Ø3/4" 9.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 3.00 pcs
PVC tee Ø3/4" 3.00 pcs
PVC tee Ø3/4" (threaded) 3.00 pcs
PVC coupling Ø3/4" 3.00 pcs
PVC end plug Ø3/4" 3.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 3.00 length
Full thread rod Ø3/8" 43.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 98.00 pcs
Bolts and nuts Ø3/8" 12.00 pcs
Loop hanger Ø3" 62.00 pcs
C-clamp 3" w tox and screw 6.00 pcs
Spring isolator 12.00 pcs
Secondary drain pan
GI Sheet GA 22 3.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll
Consumables
Refrigerant R410a 2.00 tanks
Nitrogen 2.00 tanks
R-141B 3.00 cans
Mapp gas 3.00 tanks
Silfus Rod 12.00 pcs
Polyethylene tape 3.00 rolls
Aerotape 3.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 16.00 pcs
Rugby 1.00 gal
Solvent 3.00 cans
Electrical Tape 3.00 pcs
Welding Rod 3.00 kg
Rugs 9.00 pcs
Sub Total Cost
BID FORM 5 of 26
RESTORATIVE LABORATORY/ORTHODONTIC CLINIC
Equipment
2.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 1/60/220, with wired controller
1.00 unit
5.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit
6.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit
Copper pipe and fittings
Copper Pipe Ø1/2" Hard Drawn Type L, 20' 5.00 length
Copper Pipe Ø1/4" Hard Drawn Type L, 20' 5.00 length
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 7.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 7.00 length
Rubber Insulation Ø1/2" x 3/4" x 6' 17.00 pcs
Rubber Insulation Ø1/4" x 3/4" x 6' 17.00 pcs
Rubber Insulation Ø5/8" x 3/4" x 6' 24.00 pcs
Rubber Insulation Ø3/8" x 3/4" x 6' 24.00 pcs
Polyethylene Tape 8.00 rolls
Copper elbow Ø1/2" LR 14.00 pcs
Copper elbow Ø1/4" LR 14.00 pcs
Copper elbow Ø3/8" LR 14.00 pcs
Copper elbow Ø5/8" LR 14.00 pcs
Copper coupling Ø1/2" 9.00 pcs
Copper coupling Ø1/4" 9.00 pcs
Copper coupling Ø3/8" 9.00 pcs
Copper coupling Ø5/8" 9.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 6.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 6.00 pcs
PVC elbow Ø3/4" 9.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 3.00 pcs
PVC tee Ø3/4" 3.00 pcs
PVC tee Ø3/4" (threaded) 3.00 pcs
PVC coupling Ø3/4" 3.00 pcs
PVC end plug Ø3/4" 3.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 3.00 length
Full thread rod Ø3/8" 50.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 100.00 pcs
Bolts and nuts Ø3/8" 12.00 pcs
Loop hanger Ø3" 70.00 pcs
C-clamp 3" w tox and screw 6.00 pcs
Spring isolator 12.00 pcs
Secondary drain pan
GI Sheet GA 22 3.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll
Consumables
Refrigerant R410a 2.00 tanks
Nitrogen 2.00 tanks
R-141B 3.00 cans
Mapp gas 3.00 tanks
Silfus Rod 12.00 pcs
BID FORM 6 of 26
Polyethylene tape 3.00 rolls
Aerotape 3.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 16.00 pcs
Rugby 1.00 gal
Solvent 3.00 cans
Electrical Tape 3.00 pcs
Welding Rod 3.00 kg
Rugs 9.00 pcs
Sub Total Cost
RESTORATIVE CLINIC
Equipment
6.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
2.00 units
Copper pipe and fittings
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 6.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 6.00 length
Rubber Insulation Ø5/8" x 3/4" x 6' 20.00 pcs
Rubber Insulation Ø3/8" x 3/4" x 6' 20.00 pcs
Polyethylene Tape 6.00 rolls
Copper elbow Ø3/8" LR 10.00 pcs
Copper elbow Ø5/8" LR 10.00 pcs
Copper coupling Ø3/8" 6.00 pcs
Copper coupling Ø5/8" 6.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 4.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 7.00 pcs
PVC elbow Ø3/4" 6.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 2.00 pcs
PVC tee Ø3/4" 2.00 pcs
PVC tee Ø3/4" (threaded) 2.00 pcs
PVC coupling Ø3/4" 2.00 pcs
PVC end plug Ø3/4" 2.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 2.00 length
Full thread rod Ø3/8" 32.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 73.00 pcs
Bolts and nuts Ø3/8" 8.00 pcs
Loop hanger Ø3" 43.00 pcs
C-clamp 3" w tox and screw 4.00 pcs
Spring isolator 8.00 pcs
Secondary drain pan
GI Sheet GA 22 3.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll
Consumables
Refrigerant R410a 2.00 tanks
Nitrogen 2.00 tanks
R-141B 2.00 cans
BID FORM 7 of 26
Mapp gas 3.00 tanks
Silfus Rod 12.00 pcs
Polyethylene tape 3.00 rolls
Aerotape 2.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 16.00 pcs
Rugby 1.00 gal
Solvent 2.00 cans
Electrical Tape 2.00 pcs
Welding Rod 2.00 kg
Rugs 6.00 pcs
Sub Total Cost
ORAL MEDICAL CLINIC
Equipment
2.5HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 1/60/220, with wired controller
3.00 units
Copper pipe and fittings
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 9.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 9.00 length
Rubber Insulation Ø5/8" x 3/4" x 6' 30.00 pcs
Rubber Insulation Ø3/8" x 3/4" x 6' 30.00 pcs
Polyethylene Tape 3.00 rolls
Copper elbow Ø3/8" LR 12.00 pcs
Copper elbow Ø5/8" LR 12.00 pcs
Copper coupling Ø3/8" 9.00 pcs
Copper coupling Ø5/8" 9.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 6.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 10.00 pcs
PVC elbow Ø3/4" 18.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 3.00 pcs
PVC tee Ø3/4" 3.00 pcs
PVC tee Ø3/4" (threaded) 3.00 pcs
PVC coupling Ø3/4" 3.00 pcs
PVC end plug Ø3/4" 3.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 3.00 length
Full thread rod Ø3/8" 27.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 72.00 pcs
Bolts and nuts Ø3/8" 12.00 pcs
Loop hanger Ø3" 36.00 pcs
C-clamp 3" w tox and screw 6.00 pcs
Spring isolator 12.00 pcs
Secondary drain pan
GI Sheet GA 22 3.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.20 roll
Consumables
Refrigerant R410a 1.00 tank
BID FORM 8 of 26
Nitrogen 1.00 tank
R-141B 3.00 cans
Mapp gas 3.00 tanks
Silfus Rod 12.00 pcs
Polyethylene tape 2.00 rolls
Aerotape 2.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pcs
Rubber pad 1/2" thick x 2" x 2" 12.00 pcs
Rugby 1.00 gal
Solvent 3.00 cans
Electrical Tape 3.00 pcs
Welding Rod 3.00 kg
Rugs 10.00 pcs
Sub Total Cost
ORAL DIAGNOSTIC CLINIC
Equipment
2.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 1/60/220, with wired controller
1.00 unit
Copper pipe and fittings
Copper Pipe Ø1/2" Hard Drawn Type L, 20' 3.00 length
Copper Pipe Ø1/4" Hard Drawn Type L, 20' 3.00 length
Rubber Insulation Ø1/2" x 3/4" x 6' 10.00 pcs
Rubber Insulation Ø1/4" x 3/4" x 6' 10.00 pcs
Polyethylene Tape 4.00 rolls
Copper elbow Ø1/4" LR 4.00 pcs
Copper elbow Ø1/2" LR 4.00 pcs
Copper coupling Ø1/4" 3.00 pcs
Copper coupling Ø1/2" 3.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 2.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 4.00 pcs
PVC elbow Ø3/4" 3.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 1.00 pcs
PVC tee Ø3/4" 1.00 pcs
PVC tee Ø3/4" (threaded) 1.00 pcs
PVC coupling Ø3/4" 1.00 pcs
PVC end plug Ø3/4" 1.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 1.00 length
Full thread rod Ø3/8" 17.00 length
Grip anchor Ø3/8" (50pcs/box) 1.00 box
Nuts and washer Ø3/8" 30.00 pcs
Bolts and nuts Ø3/8" 4.00 pcs
Loop hanger Ø3" 18.00 pcs
C-clamp 3" w tox and screw 2.00 pcs
Spring isolator 4.00 pcs
Secondary drain pan
GI Sheet GA 22 1.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.10 roll
BID FORM 9 of 26
Consumables
Refrigerant R410a 1.00 tank
Nitrogen 1.00 tank
R-141B 1.00 can
Mapp gas 1.00 tank
Silfus Rod 4.00 pcs
Polyethylene tape 2.00 rolls
Aerotape 1.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 4.00 pcs
Rugby 1.00 gal
Solvent 1.00 cans
Electrical Tape 1.00 pcs
Welding Rod 1.00 kg
Rugs 3.00 pcs
Sub Total Cost
CLASSROOM 1, CLASSROOM 2, & RESEARCH LABORATORY
Equipment
2.5HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit
4.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
3.00 units
5.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
2.00 units
Copper pipe and fittings
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 14.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 14.00 length
Rubber Insulation Ø5/8" x 3/4" x 6' 50.00 pcs
Rubber Insulation Ø3/8" x 3/4" x 6' 50.00 pcs
Polyethylene Tape 9.00 rolls
Copper elbow Ø3/8" LR 30.00 pcs
Copper elbow Ø5/8" LR 30.00 pcs
Copper coupling Ø3/8" 14.00 pcs
Copper coupling Ø5/8" 14.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 24.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 40.00 pcs
PVC elbow Ø3/4" 24.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 8.00 pcs
PVC tee Ø3/4" 8.00 pcs
PVC tee Ø3/4" (threaded) 8.00 pcs
PVC coupling Ø3/4" 8.00 pcs
PVC end plug Ø3/4" 8.00 pcs
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 11.00 length
Full thread rod Ø3/8" 110.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 250.00 pcs
Bolts and nuts Ø3/8" 32.00 pcs
BID FORM 10 of 26
Loop hanger Ø3" 168.00 pcs
C-clamp 3" w tox and screw 12.00 pcs
Spring isolator 24.00 pcs
Secondary drain pan
GI Sheet GA 22 6.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 1.00 roll
Consumables
Refrigerant R410a 3.00 tanks
Nitrogen 6.00 tanks
R-141B 3.00 can
Mapp gas 6.00 tanks
Silfus Rod 24.00 pcs
Polyethylene tape 12.00 rolls
Aerotape 6.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 24.00 pcs
Rugby 2.00 gal
Solvent 2.00 cans
Electrical Tape 6.00 pcs
Welding Rod 3.00 kg
Rugs 18.00 pcs
Sub Total Cost
CLASSROOM 3 /LABORATORY
Equipment
4.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 unit
5.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
2.00 units
6.0HP Ceiling Concealed Ducted Split Type Inverter Unit, R410a
refrigerant, 3/60/220, with wired controller
1.00 units
Copper pipe and fittings
Copper Pipe Ø5/8" Hard Drawn Type L, 20' 12.00 length
Copper Pipe Ø3/8" Hard Drawn Type L, 20' 12.00 length
Rubber Insulation Ø5/8" x 3/4" x 6' 40.00 pcs
Rubber Insulation Ø3/8" x 3/4" x 6' 40.00 pcs
Polyethylene Tape 9.00 rolls
Copper elbow Ø3/8" LR 20.00 pcs
Copper elbow Ø5/8" LR 20.00 pcs
Copper coupling Ø3/8" 12.00 pcs
Copper coupling Ø5/8" 12.00 pcs
Condensate Drain
PVC Pipe Ø3/4" x 10' 16.00 length
Rubber Insulation Ø7/8" x 1/2" x 6' 30.00 pcs
PVC elbow Ø3/4" 16.00 pcs
PVC tee reducer Ø3/4" x 2" x 2" 6.00 pcs
PVC tee Ø3/4" 6.00 pcs
PVC tee Ø3/4" (threaded) 6.00 pcs
PVC coupling Ø3/4" 6.00 pcs
PVC end plug Ø3/4" 6.00 pcs
BID FORM 11 of 26
ACCU Base, hangers and supports
Angle bar 1 1/2" x 1 1/2" x 3/16" 8.00 length
Full thread rod Ø3/8" 85.00 length
Grip anchor Ø3/8" (50pcs/box) 4.00 boxes
Nuts and washer Ø3/8" 200.00 pcs
Bolts and nuts Ø3/8" 16.00 pcs
Loop hanger Ø3" 130.00 pcs
C-clamp 3" w tox and screw 8.00 pcs
Spring isolator 16.00 pcs
Secondary drain pan
GI Sheet GA 22 4.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 0.50 roll
Consumables
Refrigerant R410a 3.00 tanks
Nitrogen 4.00 tanks
R-141B 3.00 can
Mapp gas 4.00 tanks
Silfus Rod 16.00 pcs
Polyethylene tape 12.00 rolls
Aerotape 6.00 rolls
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Rubber pad 1/2" thick x 2" x 2" 16.00 pcs
Rugby 2.00 gal
Solvent 2.00 cans
Electrical Tape 6.00 pcs
Welding Rod 3.00 kg
Rugs 12.00 pcs
Sub Total Cost
Testing and Commissioning 1.00 lot
Sub Total Cost
TOTAL AIRCONDTIONING SYSTEM
4.00 AC DUCTING SYSTEM
BIO-CHEM LABORATORY/PRE-CLINICAL LABORATORY
Ducting
GI Sheet GA 24 39.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 3.00 rolls
SAD 250 x 250 w/ OBVD 9.00 pcs
RAG 1000 x 300 1.00 pc
RAG 800 x 300 1.00 pc
Splitter damper 9.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 14.00 length
Full thread Ø3/8" 36.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 150.00 pcs
BID FORM 12 of 26
Consumables
Angel corner 360.00 pcs
Duct gasket 8.00 rolls
Duct sealant 2.00 gal
Bolts and nuts Ø3/8" 360.00 pcs
Duct tape 5.00 rolls
Canvass cloth 8.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
PROSTHO LABORATORY/PROSTHODONTIC CLINIC
Ducting
GI Sheet GA 22 11.00 sheets
GI Sheet GA 24 29.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 4.00 rolls
SAD 250 x 250 w/ OBVD 20.00 pcs
RAG 1000 x 300 1.00 pc
RAG 800 x 300 1.00 pc
Splitter damper 11.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 16.00 length
Full thread Ø3/8" 47.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 150.00 pcs
Consumables
Angel corner 472.00 pcs
Duct gasket 9.00 rolls
Duct sealant 3.00 gal
Bolts and nuts Ø3/8" 472.00 pcs
Duct tape 9.00 rolls
Canvass cloth 6.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
RESTORATIVE LABORATORY/ORTHODONTIC CLINIC
Ducting
GI Sheet GA 22 6.00 sheets
GI Sheet GA 24 29.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 4.00 rolls
SAD 250 x 250 w/ OBVD 17.00 pcs
RAG 1000 x 300 1.00 pc
RAG 800 x 300 1.00 pc
Splitter damper 21.00 pcs
BID FORM 13 of 26
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 16.00 length
Full thread Ø3/8" 46.00 length
Grip anchor Ø3/8" (50pcs/box) 4.00 boxes
Nuts and washer Ø3/8" 180.00 pcs
Consumables
Angel corner 464.00 pcs
Duct gasket 9.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 464.00 pcs
Duct tape 12.00 rolls
Canvass cloth 6.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
RESTORATIVE CLINIC
Ducting
GI Sheet GA 22 28.00 sheets
GI Sheet GA 24 22.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 4.00 rolls
SAD 200 x 200 w/ OBVD 17.00 pcs
RAG 1000 x 300 1.00 pc
Splitter damper 28.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 18.00 length
Full thread Ø3/8" 52.00 length
Grip anchor Ø3/8" (50pcs/box) 4.00 boxes
Nuts and washer Ø3/8" 104.00 pcs
Consumables
Angel corner 510.00 pcs
Duct gasket 9.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 510.00 pcs
Duct tape 12.00 rolls
Canvass cloth 4.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
ORAL MEDICAL CLINIC
Ducting
GI Sheet GA 22 49.00 sheets
BID FORM 14 of 26
Polyolefin insulation 1" thickness x 1.2m x 25m 4.00 rolls
SAD 200 x 200 w/ OBVD 27.00 pcs
RAG 1000 x 300 3.00 pc
Splitter damper 34.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 25.00 length
Full thread Ø3/8" 96.00 length
Grip anchor Ø3/8" (50pcs/box) 5.00 boxes
Nuts and washer Ø3/8" 264.00 pcs
Consumables
Angel corner 890.00 pcs
Duct gasket 11.00 rolls
Duct sealant 5.00 gal
Bolts and nuts Ø3/8" 890.00 pcs
Duct tape 14.00 rolls
Canvass cloth 6.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
ORAL DIAGNOSTIC CLINIC
Ducting
GI Sheet GA 22 10.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 1.00 roll
SAD 200 x 200 w/ OBVD 5.00 pcs
RAG 1000 x 300 1.00 pc
Splitter damper 6.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 5.00 length
Full thread Ø3/8" 15.00 length
Grip anchor Ø3/8" (50pcs/box) 1.00 box
Nuts and washer Ø3/8" 30.00 pcs
Consumables
Angel corner 190.00 pcs
Duct gasket 2.00 rolls
Duct sealant 1.00 gal
Bolts and nuts Ø3/8" 190.00 pcs
Duct tape 4.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
BID FORM 15 of 26
CLASSROOM 1, CLASSROOM 2, & RESEARCH LABORATORY
Ducting
GI Sheet GA 24 50.00 sheets
GI Sheet GA 22 7.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 5.00 rolls
SAD 250 x 250 w/ OBVD 12.00 pcs
RAG 1000 x 300 3.00 pcs
Splitter damper 18.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 19.00 length
Full thread Ø3/8" 56.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 200.00 pcs
Consumables
Angel corner 780.00 pcs
Duct gasket 16.00 rolls
Duct sealant 3.00 gal
Bolts and nuts Ø3/8" 780.00 pcs
Duct tape 9.00 rolls
Canvass cloth 12.00 yards
Blind rivet 1/8" 2.00 boxes
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
CLASSROOM 3 /LABORATORY
Ducting
GI Sheet GA 24 40.00 sheets
GI Sheet GA 22 4.00 sheets
Polyolefin insulation 1" thickness x 1.2m x 25m 4.00 rolls
SAD 250 x 250 w/ OBVD 8.00 pcs
RAG 1000 x 300 2.00 pcs
Splitter damper 12.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16 thickness 15.00 length
Full thread Ø3/8" 41.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 150.00 pcs
Consumables
Angel corner 490.00 pcs
Duct gasket 12.00 rolls
Duct sealant 2.00 gal
Bolts and nuts Ø3/8" 490.00 pcs
Duct tape 6.00 rolls
Canvass cloth 8.00 yards
Blind rivet 1/8" 2.00 boxes
Red oxide paint 1.00 gal
Thinner 1.00 bot
BID FORM 16 of 26
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
TOTAL AC DUCTING SYSTEM
5.00 EXHAUST DUCTING SYSTEM
BIO-CHEM LABORATORY/PRE-CLINICAL LABORATORY
Exhaust Blower
Exhaust Blower SISW @ 880CFM 1.00 unit
Exhaust Blower SISW @ 1320CFM 1.00 unit
Wiring and controller 2.00 sets
Exhaust Ducting
GI Sheet GA 24 18.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 18.00 sheets
Spiral Duct, 3m/length 10.00 length
Spiral elbow 90deg 10.00 pcs
Spiral elbow 45deg 8.00 pcs
Spiral duct connector 20.00 pcs
RAG 250 x 250 9.00 pcs
Splitter damper 7.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 7.00 length
Angle bar 2" x 2" x 1/4" thickness 2.00 length
Full thread Ø3/8" 19.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 100.00 pcs
Rubber pad 1/2" thick x 2" x 2" 8.00 pcs
Consumables
Angel corner 256.00 pcs
Duct gasket 5.00 rolls
Duct sealant 2.00 gal
Bolts and nuts Ø3/8" 256.00 pcs
Duct tape 4.00 rolls
Canvass cloth 4.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
PROSTHO LABORATORY/PROSTHODONTIC CLINIC
Exhaust Blower
Exhaust Blower SISW @ 660CFM 1.00 unit
Exhaust Blower SISW @ 1700CFM 1.00 unit
Wiring and controller 2.00 sets
BID FORM 17 of 26
Exhaust Ducting
GI Sheet GA 24 41.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 26.00 sheets
Spiral Duct, 3m/length 10.00 length
Spiral elbow 90deg 10.00 pcs
Spiral elbow 45deg 8.00 pcs
Spiral duct connector 20.00 pcs
RAG 250 x 250 3.00 pcs
RAG 150 x 150 17.00 pcs
Splitter damper 19.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 20.00 length
Angle bar 2" x 2" x 1/4" thickness 2.00 length
Full thread Ø3/8" 36.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 150.00 pcs
Rubber pad 1/2" thick x 2" x 2" 8.00 pcs
Consumables
Angel corner 600.00 pcs
Duct gasket 8.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 600.00 pcs
Duct tape 11.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
RESTORATIVE LABORATORY/ORTHODONTIC CLINIC
Exhaust Blower
Exhaust Blower SISW @ 660CFM 1.00 unit
Exhaust Blower SISW @ 1760CFM 1.00 unit
Wiring and controller 2.00 sets
Exhaust Ducting
GI Sheet GA 24 45.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 30.00 sheets
Spiral Duct, 3m/length 6.00 length
Spiral elbow 90deg 8.00 pcs
Spiral elbow 45deg 4.00 pcs
Spiral duct connector 12.00 pcs
RAG 250 x 250 3.00 pcs
RAG 150x150 16.00 pcs
Splitter damper 13.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 21.00 length
Angle bar 2" x 2" x 1/4" thickness 2.00 length
Full thread Ø3/8" 39.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
BID FORM 18 of 26
Nuts and washer Ø3/8" 150.00 pcs
Rubber pad 1/2" thick x 2" x 2" 8.00 pcs
Consumables
Angel corner 584.00 pcs
Duct gasket 9.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 584.00 pcs
Duct tape 12.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
RESTORATIVE CLINIC
Exhaust Blower
Exhaust Blower SISW @ 1760CFM 1.00 unit
Wiring and controller 1.00 set
Exhaust Ducting
GI Sheet GA 24 56.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 33.00 sheets
Spiral Duct, 3m/length 3.00 length
Spiral elbow 90deg 4.00 pcs
Spiral elbow 45deg 2.00 pcs
Spiral duct connector 6.00 pcs
RAG 150x150 24.00 pcs
Splitter damper 33.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 28.00 length
Angle bar 2" x 2" x 1/4" thickness 1.00 length
Full thread Ø3/8" 49.00 length
Grip anchor Ø3/8" (50pcs/box) 4.00 boxes
Nuts and washer Ø3/8" 200.00 pcs
Rubber pad 1/2" thick x 2" x 2" 4.00 pcs
Consumables
Angel corner 600.00 pcs
Duct gasket 10.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 600.00 pcs
Duct tape 12.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
BID FORM 19 of 26
ORAL MEDICAL CLINIC
Exhaust Blower
Exhaust Blower SISW @ 800CFM 3.00 units
Wiring and controller 3.00 sets
Exhaust Ducting
GI Sheet GA 24 54.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 28.00 sheets
Spiral Duct, 3m/length 15.00 length
Spiral elbow 90deg 12.00 pcs
Spiral elbow 45deg 12.00 pcs
Spiral duct connector 30.00 pcs
RAG 150x150 24.00 pcs
Splitter damper 39.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 28.00 length
Angle bar 2" x 2" x 1/4" thickness 6.00 length
Full thread Ø3/8" 30.00 length
Grip anchor Ø3/8" (50pcs/box) 4.00 boxes
Nuts and washer Ø3/8" 200.00 pcs
Rubber pad 1/2" thick x 2" x 2" 12.00 pcs
Consumables
Angel corner 600.00 pcs
Duct gasket 10.00 rolls
Duct sealant 4.00 gal
Bolts and nuts Ø3/8" 600.00 pcs
Duct tape 12.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 2.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
ORAL DIAGNOSTIC CLINIC
Exhaust Blower
Exhaust Blower SISW @ 300CFM 1.00 unit
Wiring and controller 1.00 set
Exhaust Ducting
GI Sheet GA 24 10.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 6.00 sheets
Spiral Duct, 3m/length 5.00 length
Spiral elbow 90deg 4.00 pcs
Spiral elbow 45deg 4.00 pcs
Spiral duct connector 10.00 pcs
RAG 150x150 5.00 pcs
Splitter damper 9.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 6.00 length
Angle bar 2" x 2" x 1/4" thickness 1.00 length
BID FORM 20 of 26
Full thread Ø3/8" 20.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 40.00 pcs
Rubber pad 1/2" thick x 2" x 2" 4.00 pcs
Consumables
Angel corner 360.00 pcs
Duct gasket 2.00 rolls
Duct sealant 2.00 gal
Bolts and nuts Ø3/8" 360.00 pcs
Duct tape 4.00 rolls
Canvass cloth 2.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
CLASSROOM 1, CLASSROOM 2, & RESEARCH LABORATORY
Exhaust Blower
Exhaust Blower SISW @ 880CFM 1.00 unit
Exhaust Blower SISW @ 1320CFM 2.00 units
Wiring and controller 3.00 sets
Exhaust Ducting
GI Sheet GA 24 23.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 23.00 sheets
Spiral Duct, 3m/length 9.00 length
Spiral elbow 90deg 15.00 pcs
Spiral elbow 45deg 9.00 pcs
Spiral duct connector 12.00 pcs
RAG 250x250 18.00 pcs
Splitter damper 16.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 10.00 length
Angle bar 2" x 2" x 1/4" thickness 3.00 length
Full thread Ø3/8" 29.00 length
Grip anchor Ø3/8" (50pcs/box) 3.00 boxes
Nuts and washer Ø3/8" 120.00 pcs
Rubber pad 1/2" thick x 2" x 2" 12.00 pcs
Consumables
Angel corner 540.00 pcs
Duct gasket 6.00 rolls
Duct sealant 3.00 gal
Bolts and nuts Ø3/8" 540.00 pcs
Duct tape 8.00 rolls
Canvass cloth 6.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 2.00 pc
BID FORM 21 of 26
Drill bit Ø3/8" (metal) 2.00 pc
Sub Total Cost
CLASSROOM 3 /LABORATORY
Exhaust Blower
Exhaust Blower SISW @ 1760CFM 1.00 unit
Exhaust Blower SISW @ 1320CFM 1.00 unit
Wiring and controller 2.00 sets
Exhaust Ducting
GI Sheet GA 24 23.00 sheets
Rockwool insulation 4' x 8' x 1/2" thickness 23.00 sheets
Spiral Duct, 3m/length 9.00 length
Spiral elbow 90deg 6.00 pcs
Spiral elbow 45deg 10.00 pcs
Spiral duct connector 8.00 pcs
RAG 250x250 12.00 pcs
Splitter damper 10.00 pcs
Hangers & Supports
Angle bar 1 1/2" x 1 1/2" x 3/16" thickness 9.00 length
Angle bar 2" x 2" x 1/4" thickness 4.00 length
Full thread Ø3/8" 26.00 length
Grip anchor Ø3/8" (50pcs/box) 2.00 boxes
Nuts and washer Ø3/8" 100.00 pcs
Rubber pad 1/2" thick x 2" x 2" 8.00 pcs
Consumables
Angel corner 360.00 pcs
Duct gasket 5.00 rolls
Duct sealant 2.00 gal
Bolts and nuts Ø3/8" 360.00 pcs
Duct tape 6.00 rolls
Canvass cloth 4.00 yards
Blind rivet 1/8" 1.00 box
Red oxide paint 1.00 gal
Thinner 1.00 bot
Paint brush 3" 1.00 pc
Drill bit Ø3/8" (concrete) 1.00 pc
Drill bit Ø3/8" (metal) 1.00 pc
Sub Total Cost
Testing and Commissioning 1.00 lot
Sub Total Cost
TOTAL EXHAUST DUCTING SYSTEM
6.00 ELECTRICAL WORKS
Electrical Control Wiring for AC System
BIO-CHEM LABORATORY/PRE-CLINICAL LABORATORY
THHN wire 3.5mm2 300.00 mtr/s
THHN wire 5.5mm2 36.00 mtr/s
BID FORM 22 of 26
EMT conduit Ø1/2" 15.00 length
Liquid tight flexible conduit Ø1/2" 16.00 mtr/s
EMT elbow Ø1/2" 16.00 pc/s
EMT straight connector Ø1/2" 15.00 pc/s
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 4.00 set/s
Sub Total Cost
PROSTHO LABORATORY/PROSTHODONTIC CLINIC
THHN wire 3.5mm2 300.00 mtrs
THHN wire 5.5mm2 24.00 mtrs
EMT conduit Ø1/2" 16.00 length
Liquid tight flexible conduit Ø1/2" 12.00 mtrs
EMT elbow Ø1/2" 12.00 pcs
EMT straight connector Ø1/2" 16.00 pcs
Circuit breaker 20A 2-pole with NEMA 3R Enclosure 1.00 set
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 2.00 sets
Sub Total Cost
RESTORATIVE LABORATORY/ORTHODONTIC CLINIC
THHN wire 3.5mm2 330.00 mtrs
THHN wire 5.5mm2 24.00 mtrs
EMT conduit Ø1/2" 21.00 length
Liquid tight flexible conduit Ø1/2" 12.00 mtrs
EMT elbow Ø1/2" 14.00 pcs
EMT straight connector Ø1/2" 16.00 pcs
Circuit breaker 20A 2-pole with NEMA 3R Enclosure 1.00 set
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 2.00 sets
Sub Total Cost
RESTORATIVE CLINIC
THHN wire 3.5mm2 210.00 mtrs
THHN wire 5.5mm2 18.00 mtrs
EMT conduit Ø1/2" 12.00 length
Liquid tight flexible conduit Ø1/2" 10.00 mtrs
EMT elbow Ø1/2" 6.00 pcs
EMT straight connector Ø1/2" 12.00 pcs
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 2.00 sets
Sub Total Cost
ORAL MEDICAL CLINIC
THHN wire 3.5mm2 270.00 mtrs
THHN wire 5.5mm2 18.00 mtrs
EMT conduit Ø1/2" 10.00 length
Liquid tight flexible conduit Ø1/2" 12.00 mtrs
EMT elbow Ø1/2" 12.00 pcs
EMT straight connector Ø1/2" 12.00 pcs
Circuit breaker 30A 2-pole with NEMA 3R Enclosure 3.00 sets
Sub Total Cost
ORAL DIAGNOSTIC CLINIC
THHN wire 3.5mm2 120.00 mtrs
THHN wire 5.5mm2 6.00 mtrs
EMT conduit Ø1/2" 6.00 length
Liquid tight flexible conduit Ø1/2" 4.00 mtrs
EMT elbow Ø1/2" 4.00 pcs
EMT straight connector Ø1/2" 4.00 pcs
Circuit breaker 20A 2-pole with NEMA 3R Enclosure 1.00 set
Sub Total Cost
BID FORM 23 of 26
CLASSROOM 1, CLASSROOM 2, & RESEARCH LABORATORY
THHN wire 3.5mm2 510.00 mtrs
THHN wire 5.5mm2 70.00 mtrs
EMT conduit Ø1/2" 28.00 length
Liquid tight flexible conduit Ø1/2" 16.00 mtrs
EMT elbow Ø1/2" 28.00 pcs
EMT straight connector Ø1/2" 28.00 pcs
Circuit breaker 20A 2-pole with NEMA 3R Enclosure 1.00 set
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 7.00 sets
Sub Total Cost
CLASSROOM 3 /LABORATORY
THHN wire 3.5mm2 360.00 mtrs
THHN wire 5.5mm2 45.00 mtrs
EMT conduit Ø1/2" 20.00 length
Liquid tight flexible conduit Ø1/2" 20.00 mtrs
EMT elbow Ø1/2" 20.00 pcs
EMT straight connector Ø1/2" 20.00 pcs
Circuit breaker 30A 3-pole with NEMA 3R Enclosure 4.00 sets
Sub Total Cost
Upgrading of Panel Board
SECOND FLOOR
Wires and Cables
3.5mm2 THHN 2.00 box(s)
5.5mm2 THHN 1.00 roll(s)
8.0mm2 THHN 90.00 mtrs
14mm2 THHN 270.00 mtrs
38mm2 THHN 90.00 mtrs
Conduit Pipes and Accessories
20mmØ PVC conduit pipe with fittings and complete accessories 55.00 lengths
32mmØ PVC conduit pipe with fittings and complete accessories 60.00 lengths
40mmØ PVC conduit pipe with fittings and complete accessories 20.00 lengths
Circuit Breakers and Accessories
PPAC-SF @ 60AT 3 pole, 18KAIC with 6 branch circuits @
20AT 2 pole,1-40AT 2 pole, 2-60AT 2 pole, & & 1-70AT 2 pole 1.00 assy.
bolt-on type.
20AT, 2 pole, NEMA 3R, Enclosure 2.00 unit(s)
40AT, 2 pole, NEMA 3R, Enclosure 1.00 unit(s)
60AT, 2 pole, NEMA 3R, Enclosure 2.00 unit(s)
70AT, 2 pole, NEMA 3R, Enclosure 1.00 unit(s)
Sub Total Cost
THIRD FLOOR
Wires and Cables
3.5 mm² THHN 8.00 box(s)
5.5 mm² THHN 3.00 roll(s)
8.0 mm² THHN 370.00 mtr(s)
14 mm² THHN 90.00 mtr(s)
22 mm² THHN 100.00 mtr(s)
38 mm² THHN 90.00 mtr(s)
BID FORM 24 of 26
Conduit Pipes and Accessories
20mmØ PVC conduit pipe with fittings and complete accessories 160.00 lengths
32mmØ PVC conduit pipe with fittings and complete accessories 140.00 lengths
40mmØ PVC conduit pipe with fittings and complete accessories 20.00 lengths
50mmØ PVC conduit pipe with fittings and complete accessories 20.00 lengths
Circuit Breakers and Accessories
PPAC-TF @ 160AT, 3 pole, 35KAIC with
21 branch circuits @ 9-20AT 2 pole, 3-30AT 2 pole, 2-60AT 2 pole, 1.00 assy.
3-50AT 3 pole, 3-40AT 2 pole & 1-70AT 2 pole bolt-on type.
20AT, 2 pole, NEMA 3R, Enclosure 9.00 unit(s)
30AT, 2 pole, NEMA 3R, Enclosure 3.00 unit(s)
40AT, 2 pole, NEMA 3R, Enclosure 3.00 unit(s)
60AT, 2 pole, NEMA 3R, Enclosure 2.00 unit(s)
50AT, 3 pole, NEMA 3R, Enclosure 3.00 unit(s)
70AT, 2 pole, NEMA 3R, Enclosure 1.00 unit(s)
Sub Total Cost
FOURTH FLOOR
Wires and Cables
3.5 mm² THHN 6.00 box(s)
5.5 mm² THHN 2.00 roll(s)
8.0 mm² THHN 450.00 mtr(s)
14 mm² THHN 405.00 mtr(s)
22 mm² THHN 280.00 mtr(s)
50 mm² THHN 100.00 mtr(s)
Conduit Pipes and Accessories
20mmØ PVC conduit pipe with fittings and complete accessories 110.00 lengths
32mmØ PVC conduit pipe with fittings and complete accessories 80.00 lengths
40mmØ PVC conduit pipe with fittings and complete accessories 50.00 lengths
65mmØ PVC conduit pipe with fittings and complete accessories 25.00 lengths
Circuit Breakers and Accessories
PPAC-FF @ 200AT, 3 pole, 35KAIC with
15 branch circuits @ 5-20AT 2 pole, 1-50AT 3 pole, 1-40AT 2 pole, 1.00 assy.
4-60AT 3 pole, & 4-70AT 2 pole bolt-on type..
20AT, 2 pole, NEMA 3R, Enclosure 5.00 unit(s)
50AT, 3 pole, NEMA 3R, Enclosure 1.00 unit(s)
40AT, 2 pole, NEMA 3R, Enclosure 1.00 unit(s)
60AT, 2 pole, NEMA 3R, Enclosure 4.00 unit(s)
70AT, 2 pole, NEMA 3R, Enclosure 4.00 unit(s)
Sub Total Cost
DP ELECTRICAL ROOM @ GROUND FLOOR
DP MAIN @ 500AT 3 pole, 35KAIC, 230V, with branch
circuits @ 1-60AT 3 pole, 18KAIC, 1-160AT 3 pole, 35KAIC 1.00 assy.
& 1-200AT 3 pole, 35KAIC bolt-on type.
THHN wire 250mm2 60.00 mtrs
THHN wire 50mm2 20.00 mtrs
100mmØ PVC Pipe 10.00 pcs
Fabrication of Busbar @ MDP (Including lags & Accessories) 1.00 lot
Sub Total Cost
BID FORM 25 of 26
Miscellaneous Items
copper groound rod 5/8" 3m 4.00 length
Big Electrical Tape 72.00 roll(s)
Rubber Tape 11.00 roll(s)
GI Wire 10.00 kilo(s)
Chipping & Restoration Works 1.00 lot
Hanger & Support 1.00 lot
Termination of existing panel board, and Testing and Commisioning 1.00 lot
Sub Total Cost
TOTAL ELECTRICAL WORKS
1.00 GENERAL REQUIREMENTS PhP
2.00 ARCHITECTURAL WORKS
3.00 AIRCONDITIONING SYSTEM
4.00 AC DUCTING SYSTEM
5.00 EXHAUST DUCTING SYSTEM
6.00 ELECTRICAL WORKS
SUB-TOTAL COST PhP
VAT @ 12.00%
TOTAL PROJECT COST PhP
Amount in Words :
By the act of submitting this bid, I/we hereby confirm that I/we:
a) have inspected the site
b) determined the characteristics of the contract works and the conditions for this project
c) examined all instructions, forms, terms and project requirements in the Bidding Documents
d) was/were given the opportunity to submit queries at least ten(10) calendar days before the submission of bids
e) have examined and agreed to the correctness of the Bill of Quantities
Submitted by:
Name and Signature: Company Name:
Position: Date:
***SUMMARY***
Note:
*Indirect Cost (OCM, & Profit) included per item unit cost
*Power and water consumption are included in mark up (indirect cost)
*Bonds & Securities and power & water supply consumption are considered as overhead expenses while Plans (As-built plan) is considered as
miscellaneous expense which are already included in the computation of OCM (mark-up).
BID FORM 26 of 26