project: softshine i/d or direct - boston light source€¦ · 10/90 10% up; 90% down ... enter the...
TRANSCRIPT
LAMPING OPTIONS
SPECIFICATIONS
S P E C I F I C A T I O N S
__________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ __________ _____________________
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: [email protected] • PeerlessLighting.com
CATALOG NUMBER
Specify by Low (LO) or High (HI) LO HI
Nominal Delivered Lumens* 3400 4800
Watts* 30 45
Lumen Packages:
* nominal per 4’
Type: ________________________
Project: ______________________
1© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx I/D or Direct
BRM9L Bruno LED Softshine
Suspended BRM9L
Bruno LED Softshine I/D or Direct
BRM9L
ConstructionNominal 8 1⁄4” x 1 3⁄4” rectangular housing is formed from cold-rolled steel. Die-cast end caps are mechanically attached with no exposed fasteners.
SourceTwo LED lumen packages and three available color temperature options (3000K, 3500K and 4000K).
OpticsSoftshine®-engineered optical system consists of high performance lens, diffusers and metal reflectors.
FinishFinish for housing and end caps is white, black or painted aluminum. Consult factory for custom colors.
ControlsOptional nLight-embedded controls allow for constant lumen management (N80) and facilitate simple “plug-and-play” networking and control via CAT-5e cable.
ElectricalLED light engine consists of modular LED boards and 0-10V dimming driver rated for 50,000 hours (L80) at 25° C ambient temperature. Driver input wattage is 30W for 3400 delivered-lumen package and 45W for 4800 delivered-lumens per 4’ section. Specify 120V or 277V. Pre-wired with 16AWG fixture wire. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included.
EnvironmentDamp location label option. Ambient operating temperature between 0° C and 25° C.
Luminaire Length4’ and 8’ lengths in a single section for exact suspension spacing of 4’ and 8’. For total luminaire length, add 5⁄8” for each flat end cap and 4” for each sculptured end cap. Using internal joiners, 4’ and 8’ sections can be joined to form longer rows.
ValidationCSA/CUS listed. Individual sections are FCC part 15 certified. LM-79 tested. Lighting Facts partner.
WarrantyFive-year warranty coverage includes luminaire construction, LED light engine, driver and optional nLight control device. Terms and conditions apply.
Packaging100% post-consumer recycled cardboard box and inserts. Biodegradable, protective luminaire bag. Recycled kraft paper tape.
__________ __________ _________ __________ _________ __________ __________ __________
Luminaire
BRM9L
Light Output
LO 3400 nominal delivered-lumens
HI 4800 nominal delivered-lumens
Distribution1
Blank Std. 70% up; 30% down60/40 60% up; 40% down 50/50 50% up; 50% down40/60 40% up; 60% down30/70 30% up; 70% down20/80 20% up; 80% down10/90 10% up; 90% down0/100 0% up; 100% down
Shielding
SSH Softshine® lens
Luminaire Row Length
X FT(4’ increments)
Maximum Section Length
R4 4’ section(s)R8 8’ section(s)
Voltage
120277
Driver Type
EZB eldoLED dims to black
# of Emergency Modules
(Blank) None1SE 1 section2SE 2 sectionsXSE X sections
Emergency Type2
(Blank) NoneEC Emergency
circuit
Switching
SCT Single circuit
______________ ______________ ______________ ______________ _________________________________
LED Color Temperature
LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP840 4000K 80+ CRI
Mounting Type /
F1/ T-bar ceiling (universal mounting bracket)
F1A/ T-bar ceiling (UMB with integrated J-box)
F2/ Hard ceiling (horizontal J-box)
Overall Suspension
15 15” 18 18” 24 24”36 36”48 48”72 72”XX XX”
Overall suspension is measured from ceiling to bottom of luminaire.
Finish
C110 Painted aluminum (low gloss)
C210 White white (fine textured)
C202 BlackC099 Custom finish
Options
ACG Adjustable cable gripperBLK Black cord, cord manager and canopy CFG Configuration, consult factory for drawingsCP Chicago plenum (available with F1A only)DU3 Dust coverDL Damp location labelELH4 Emergency through wiring w/separate feedGLR Fusing (fast blow)GMF Fusing (slow blow)LM 80% lumen management without networkingMCS Matching feed canopy at supportN80 nLight-enabled control module per row/zone with 80% constant lumen managementN100 nLight-enabled control module per row/zone with NO lumen managementOJB Offset junction boxSCEP Sculptured end capsSLP Sloped ceiling (for 10-45°, must be specified with F2 and OJB options)XXXX Integrated sensor; choose options and obtain code on page 2
Notes:1 Nominal distribution. Refer to photometric tests
for exact distribution.2 Emergency type is installed in last 4’ of
luminaire sections. Separate feed required 3 Dust cover not availab e with 0/100 distribution4 No dimming control on emergency feed
1 3⁄4”
8 1⁄4”
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: [email protected] • PeerlessLighting.com
INTEGRATED NLIGHT MICRO SENSOR
STANDARD SECTIONS
PLAN VIEW
LO116 lm/W3400 delivered lumens
70% up / 30% down
HI 113 lm/W4800 delivered lumens
70% up / 30% down
Type: ________________________
Project: ______________________
WEIGHTS & SUPPORT SPACINGWEIGHTS & SUPPORT SPACING
22 LBS
38 LBS
5⁄8” standard flat end plates 4” optional sculptured end plates
Key:• Support or feed locationx Please consult factory for sensor placement
4’-1 5⁄8” O.A.
8’-0”
8’-1 1⁄4” O.A.
4’-0 3⁄8”
2© 2013 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Peerless Bruno” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx I/D or Direct
BRM9L Bruno LED Softshine
Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.
Network Type & Sensor Power Source (choose one)1* nLight-Enabled (Network-Ready) with Luminaire-Integrated Power Pack
10’ Cat-5e cable and splitter provided
2 Standalone Operation (No Networking) with Luminaire Integrated Power PackNo Cat-5e cable provided
3* nLight-Enabled (Network-Ready) with Remote nLight Power Pack or nPanel 10’ Cat-5e cable and splitter providedOrder required remote nLight Power Pack or nPanel separately through nLight (Acuity Brands Controls)
Determine the appropriate sensor type, network type and sensor power source for your application. Enter the code in the Options section of the Catalog Number.
EXAMPLE: PDT1
Sensor Type (choose one)ADC nLight model nES ADCX
Daylight Dimming Specify 0-10V dimming ballast No occupancy sensing
PDT nLight model nES PDT7 ADCX
Daylight Dimming and/or Occupancy Detection Specify 0-10v dimming ballast for daylight dimming Specify fixed-output ballast for occupancy detection only (daylight dimming disabled)
For more information about the Integrated nLight Micro Sensor, its capabilities and options, download the PDF guide at: PeerlessLighting.com/nLight-Sensor-Guide*nLight-Enabled (network-ready) options include one RJ-45 connector on the luminaire and 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on wattage/voltage limitations). The Cat-5e cable drop is located in the same section as the sensor. For multiple zones, please contact [email protected].
Bruno LED Softshine I/D or Direct
Suspended BRM9L
PHOTOMETRICS
375
500
250
125
0
550
733
367
183
0
CONFIGURATIONS
Tenon “L”, “T”, “X” and straight connectors available for suspended configurations. Reference Pattern Connector Guide for additional details.
Actual performance may differ as a result of end-user environment and application.
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: [email protected] • PeerlessLighting.com
Type: ________________________
Project: ______________________
LIGHTING FACTS LABELS
Suspended BRM9L
LP835 HI
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark of Acuity Brands Lighting.Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx I/D or Direct
BRM9L Bruno LED Softshine 3
Bruno LED Softshine I/D or Direct