project initiatives
TRANSCRIPT
-
7/31/2019 Project Initiatives
1/15
Guidelines for Project work
Dr. K. SujathaDepartment of Electrical & Electronics Engineering
Dr.M.G.R. Educational & Research Institute
Maduravoyal, Chennai
-
7/31/2019 Project Initiatives
2/15
Title of the project work
Register Number
Name of the student
Name of the supervisor
-
7/31/2019 Project Initiatives
3/15
Main objective of the project work
Abstract
Scope of the work
Methodology
Literature survey
Work carried out
Work to be carried out
Conclusion
Papers presented and communicated
References
Frame work for project
-
7/31/2019 Project Initiatives
4/15
Objective of the project work
To design a fuzzy controller so as to monitor
and control the level in a level process station
and also provide an intelligent control action
-
7/31/2019 Project Initiatives
5/15
Scope of the work
Effect of the conventional PI controller
To design a fuzzy controller and measure its
performance characteristics
Comparison of the performance with
mathematical measures
-
7/31/2019 Project Initiatives
6/15
Methodology
Name of the project
Data collection
Data pre-processing
Stages in implementation ofthe conventional technique
Validation with performance
measure
Data collection
Data pre-processing
Stages in implementation ofthe proposed technique
Validation with performance
measure
-
7/31/2019 Project Initiatives
7/15
Literature Survey
S.No Title of the
Paper
Author Journal/Year Inference /
Motivation
1. Soft sensor for
NOx and O2
using dynamic
neural networks
M. Shakil,
etal
Elsevier ,
Computers and
Electrical
Engineering 35
(2009)
Measurement of NOx
and O2 emissions
using PCA and
dynamic neural
network. Time delay
reduced using GA.
Determination of
complete combustion
-
7/31/2019 Project Initiatives
8/15
General Procedure
Procedure for data collection
Pre-processing of the data formulae,
algorithm or flow chart with the results for
preprocessing
Steps involved in designing the conventionaltechnique with results
Validation of the conventional technique
Steps involved in designing the proposedtechnique with results
Validation of the conventional technique
Tabulate the results for validation
-
7/31/2019 Project Initiatives
9/15
Work Carried Out
Procedure for data collectionPre-processing of the data formulae,
algorithm or flow chart with the results
for preprocessingSteps involved in designing the
conventional technique with results
Validation of the proposed techniquewith conventional technique
-
7/31/2019 Project Initiatives
10/15
Work to be Carried Out
Steps involved in designing the proposedtechnique with results
Validation of the conventional technique
Tabulate the results for validation
Hardware model
-
7/31/2019 Project Initiatives
11/15
Hardware Model
Circuitry for the proposed model
Components with specifications
Working and operation
Comparison of the output with thesimulated results
-
7/31/2019 Project Initiatives
12/15
Writing an Article
Contents:
1. Abstract: Concise summary of work
2. Introduction: Motivation/ need /contribution
3. Body: (Most Important)
3.1
3.2
3.3
3.4
4. Implementation / Case study:( Necessary)
5.Results: Tested / verified/validated/compared
6. Conclusions & Contributions:
-
7/31/2019 Project Initiatives
13/15
Conclusion
Tabulate the performance measures
Represent them graphically
Explain the advantage that you achieved in your
proposed method
Percentage success in developing the model
-
7/31/2019 Project Initiatives
14/15
References
Author 1, Author 2 and Author 3, Title of thepaper, Name of the conference or Name of theJournal, vol no: , pp: , year of publication
-
7/31/2019 Project Initiatives
15/15
Thank you