programme of work (as on 01 april 2014)bis.org.in/sf/pow/msd.pdf · programme of work (as on 01...
TRANSCRIPT
1
PROGRAMME OF WORK (AS ON 01 APRIL 2014)
MANAGEMENT AND SYSTE1MS DEPARTMENT (MSD)
B U R E A U O F I N D I A N S T A N D A R D S MANAK BHAVAN, 9, BAHADUR SHAH ZAFAR MARG
NEW DELHI 110 002
i
PREFACE
A programme of work is prepared every year for each Division of Bureau of Indian Standards to indicate the latest position of published Indian Standards and draft standards at different stages of processing. This programme of work for Management and Systems Division Council (MSDC) has been prepared Sectional Committee-wise as on 1April 2014 and arranged in the sequential order of the Committee Number. The scope of MSDC is as under:
‘Standardization in the field of quality management systems, statistical quality control, management and productivity, documentation and information, various services including banking and financial services, social responsibility, education, tourism and related services, psychological assessment, brand valuation, rating services, product recall, consumer product safety, sustainability in event management, competence standards, and conformity assessment.’
Presently, there are ten Sectional Committees under MSDC. The overall coordination of the task of MSDC is with the Management and Systems Department (MSD). Out of the ten committees, four deal with service sector, namely, Banking and Financial Services; Education; Social responsibility and Tourism. The ten committees of MSD have been numbered from MSD 2, MSD 3, MSD 4, MSD 5, MSD 6, MSD 7, MSD 9, MSD 10, MSD 12 and MSD 13. Three Sectional Committees which were earlier being handled by MSD were transferred to other Division Councils. MSD 1 (Basic Standards Sectional Committee) had been transferred in 1997 to the then Light Mechanical Engineering Department (LMD) and is now being handled by Production & General Engineering Department (PGD). MSD 8 (Hospital and Medical Care Sectional Committee) had been transferred in 2006 to Medical Equipment and Hospital Planning Department (MHD). MSD 11 (Management Systems for Eco-friendly Mining Operations Sectional Committee) has been transferred in 2011 to Mechanical Engineering Department (MED). Two Sectional Committees of MSD have been bifurcated in 2013. MSD 4 (Management and Productivity Sectional Committee) has been split into two separate Committees, namely, MSD 4 (Management and Productivity Sectional Committee) and MSD 12 (Resource Management Sectional Committee). MSD 5 (Documentation and Information Sectional Committee), has also been split into two separate Sectional Committees,namely, MSD 5 (Documentation and Information Sectional Committee) and MSD 6 (Publication and Graphic Technology Sectional Committee). One new Committee MSD 13 (Tourism and related services Sectional Committee), which was earlier being handled by Standards Promotion Department has now been transferred under the scope of MSDC and is being handled by MSD. In order to ensure that all the related publications appear at one place to the extent possible, the standards in this programme of work are listed under their respective Sectional Committees. So far, 220 standardsincluding3 special publications have been published with another 61 draft standards being under various stages of processing. In the programme of work an asterisk mark (*) given before a printed standard indicates that the standard is under revision and its relevant document is available at different stages of processing; whereas, double asterisk mark (**) indicates standard identified for revision for which document is yet to be prepared. Wherever ‘IS/ISO' followed by the designation is given, it implies that the Indian Standard is the total adoption of International Standard under dual numbering scheme and that the designation of the International Standard has been given to the Indian Standard, for example IS/ISO 9001:2008 indicates that Indian Standard is total adoption of ISO 9001:2008. Below the designation of a published standard, wherever '/ ISO......' standard number is given, it also implies that the Indian Standard is identical to the ISO standard. It is hoped that this publication will provide the community of Standards users a convenient tool for obtaining the latest information about new and upcoming standards in the field of management and quality systems. For further information, please contact: Head (Management and Systems) Bureau of Indian Standards ManakBhavan, 9 Bahadur Shah ZafarMarg, New Delhi - 110 002 Phone/Fax: 011-23231106, E-mail: [email protected]
ii
CONTENTS
COMMITTEE WISE POSITION OF WORK OF MANAGEMENT AND SYSTEMS DIVISION COUNCIL (MSDC)
Sl. No.
Title Page Number
1 Aspect wise analysis of standards 1 2 MSD 2Quality Management Sectional Committee
2 - 4
3 MSD 3 Statistical Methods For Quality and Reliability Sectional Committee
5 - 9
4 MSD 4 Management and Productivity Sectional Committee
10 – 11
5 MSD 5 Documentation and Information Sectional Committee 12 – 16
6 MSD 6 Publication and Graphic Technology Sectional Committee 17-18
7 MSD 7 Banking and Financial Services Sectional Committee
19 - 22
8 MSD 9 Education, Education services and other related services Sectional Committee
23
9 MSD 10 Social Responsibility Sectional Committee
24
10 MSD 12 Resource Management Sectional Committee
25
11 MSD 13 Tourism and related Services Sectional Committee
26
12 Annex I-List of Standards Withdrawn/Superseded
27– 29
13 AnnexII -List of Standards with Dual Number with ISO Standards
30 – 35
14 Annex III-List of Standards under BIS Certification Marks
36
15 Annex IV – List of Standards under ECO Mark
37
16 Annex V – List of Bilingual Standards
38
17 Annex VI – Membership status in ISO Committees & Subcommittees
39
18 Annex VII – List of Mandatory Standards
40
19 Annex VIII – List of Standards transferred to other departments
41 – 42
20 Annex IX – List of Special Publications
43
1
ASPECTWISE ANALYSIS OF STANDARDS
ASPECT OF STANDARD NUMBER OF
STANDARDS
PRODUCT (P) 2
METHODS OF TEST (M) 0
CODES OF PRACTICE (C) 6
GLOSSARY/TERMINOLOGY (G) 24
DIMENSIONS (D) 0
SYMBOLS (S) 2
SAFETY (F) 0
OTHERS (O) 186
TOTAL 220#
# INCLUDING 3 SPECIAL PUBLICATIONS
2
MSD 2 QUALITY MANAGEMENT SECTIONAL COMMITTEE
SCOPE - Formulation of Indian Standards in the field of generic quality management system including quality assurance, quality systems, quality manuals; generic standards, guides and guidelines documents.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 9000:2005 Quality management systems - Fundamentals and Oct 2010 / ISO vocabulary (Third Revision)
2 IS 9001:2008 Quality management systems - Requirements (Third Apr 2013 / ISO Revision) (along with Technical Corrigendum 1)
3 IS 9004:2009 Managing for the sustained success of an organization - Mar 2014 / ISO A quality management approach (Sixth Revision)
4 IS 10001:2007 Quality management - Customer satisfaction – Guidelines Mar 2012 / ISO for codes of conduct for organizations
5 IS 10002:2004 Quality Management - Customer Satisfaction – GuidelinesMar 2014 / ISO for Complaints handling in organizations (Superseding IS 15400:2003)
6 IS 10003:2007 Quality management - Customer Satisfaction – GuidelinesMar 2012 / ISO for dispute resolution external to organizations
7 IS 10005:2005 Quality management systems - Guidelines for quality plansOct 2010 / ISO (FirstRevision)
8 IS 10006:2003 Quality management systems - Guidelines for quality Mar 2014 / ISO management in projects (First Revision)
9 IS 10007:2003 Quality management systems - Guidelines for Mar 2014 / ISO configuration management (First Revision)
10 IS 10012:2003 Measurement management systems - Requirements for Mar 2014 / ISO measurement processes and measuring equipment (First Revision)
11 IS 10013:2001 Guidelines for quality management system documentationMay 2011 / ISO/TR (First Revision)
12 IS 10014:2006 Quality management - Guidelines for realizing financial May 2011 / ISO and economic benefitsSuperseding SP 57:2000)
13 IS 10015:1999 Quality management - Guidelines for training Oct 2010 / ISO 14 IS 10019:2005 Guidelines for the selection of quality management Oct 2010 / ISO system consultants and use of their services
15 * IS 10708:1985 Guide for the analysis of quality costs (First Revision) Oct 2010
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
3
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
16 * IS 12040:2001 Guidelines for development of supplier rating system Oct 2006 (First Revision) 17 * IS 15171:2002 Guidelines for establishing and implementing 5-S Mar 2014 Concept 18 * IS 15610:2006 Guidelines for measurement of customer Aug 2010 Satisfaction 19 * IS 15700:2005 Quality management systems – Requirements for Oct 2010 servicequality by Public service organizations
20 ** IS 15800:2007 Quality management systems - Guidelines for service Sept 2011 quality by public service organizations
21 IS 16070:2013 Quality Management Systems - Particular requirements for the application of ISO 9001:2008 for power sector equipment manufacturing, service & utility organization
22 IS 16949:2009 Quality management systems - Particular requirements / ISO/TS for the application of ISO 9001:2008 for automotive production and relevant service part organizations (Second Revision)
23 IS 19011:2011 Guidelines for auditing management systems / ISO (First Revision)
24 * SP 63 : 2007 Explanatory guide on IS/ISO 9001:2000 (First Revision)
25 SP 68 : 2005 Guidance on statistical techniques for ISO 9001:2000 Oct 2010 / ISO/TR 10017 (First Revision)
FINALISED DRAFTSTANDARDS UNDER PRINT
1 .MSD 2(402) Guidelines for development of supplier rating system (Second Revision of IS 12040) 2 .MSD 2(406) Explanatory guide on IS/ISO 9001:2000 (Second Revision of SP 63) DRAFT STANDARDS FINALIZED FOR PRINTING
1. MSD 2 (465) Quality management – Guidelines on people involvement and confidence
2. MSD2 (467) /ISO 10004:2012
Quality management - customer satisfaction - guideline for monitoring and measuring (First Revision of IS 15610)
3. MSD 2(426) Guidelines for establishing & implementing 5-S Concept (First Revision of IS 15171)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
4
DRAFT STANDARD COMPLETED WIDE CIRCULATION
1. MSD 2 (466)
Quality management – Customer satisfaction – Requirements for complaints handling in organizations
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1. MSD 2 (472) Guide for the analysis of quality costs(Second Revision of IS 10708)
2. MSD 2 (473) Quality Management Systems – Requirements for Service Quality by service Organizations (First Revision of IS 15700)
5
MSD 3 STATISTICAL METHODS FOR QUALITY AND RELIABI LITY SECTIONAL COMMITTEE
SCOPE - Formulation of standards relating to statistical techniques with a view to propagating their knowledge in industry and promoting their application for quality improvement.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 2:1960 Rules for rounding off numerical values (Revised) May 2011 3
2 IS 397(Part 0):2003 Methods for statistical quality control during production : Apr 2013 Part 0 Guidelines for selection of control charts (First Revision)
3 IS 397(Part 1):2003 Methods for statistical quality control during production: Apr 2013 Part 1 Control charts for variables (Second Revision) 4 IS 397(Part 2):2003 Methods for statistical quality control during Apr 2013 production:Part 2 Control charts for attributes (Third Revision)
5 IS 397(Part 3):2003 Methods for statistical quality control during production: Apr 2013 Part 3 Special control charts by variables (First Revision)
6 IS 397(Part 4):2003 Methods for statistical quality control during production: Apr 2013 Part 4 Special control charts by attributes(First Revision)
7 IS 1548:1981 Manual on basic principles of lot sampling May 2011 1 (Second Revision)
8 IS 2500(Part 1):2000 Sampling procedures for inspection by attributes : Part 1 May 2011 1 / ISO 2859-1:1999 Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Third Revision)
9 IS 2500(Part 2):1965 Sampling inspection procedures: Part 2 Inspection by May 2011 1 variables for percent defective
10 IS 2500(Part 3):1995 Sampling inspection procedures : Part 3 Sampling plans Mar 2014 / ISO 2859-2:1985 indexed by limiting quality (LQ) for isolated lot inspection
11 * IS 4905:1968 Methods for random sampling May 2011 1
12 *IS 6200(Part 1):2003 Statistical tests of significance: Part 1 Normal, t- and F- Apr 2013 tests (Third Revision)
13 IS 6200(Part 2):2004 Statistical tests of significance: Part 2 Chi-square test Mar 2014 (Second Revision)
14 IS 6200(Part 3):2003 Statistical tests of significance: Part 3 Tests for normality Apr 2013 (secondRevision)
15 IS 6200(Part 4):2008 Statistical tests of significance: Part 4 Non-parametric Apr 2013 tests (First Revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
6
Date Amd. 16 *IS 7200(Part 1):1989 Presentation of statistical data: Part 1 Tabulation and Apr 2013 1 summarization (Second Revision)
17 *IS 7200(Part 2):1975 Presentation of statistical data: Part 2 Diagrammatic May 2011 representation of data
18 IS 7300:2003 Methods of regression and correlation (Second Revision) Apr 2013
19 IS 7600:1975 Analysis of variance May 2011 20 IS 7920(Part 1):2012 Statistical vocabulary and symbols : Part 1 General statistical terms and terms used in Probability (Third Revision)
21 IS 7920(Part 2):2012 Statistical vocabulary and symbols: Part 2 Applied / ISO 3534-2:2006 statistics (Third Revision)
22 * IS 7920(Part 3):1996 Statistical vocabulary and symbols: Part 3 Design of Apr 2013 experiments (Second Revision)
23 * IS 8900:1978 Criteria for the rejection of outlying observations Aug 2010
24 IS 9300(Part 1):1979 Statistical models for industrial applications: Part 1 May 2011 1 Discrete models
25 IS 9300(Part 2):1989 Statistical models for industrial applications: Part 2 Apr 2013 2 Continuous models (First Revision)
26 IS 10427(Part 1):1982 Designs for industrial experimentation: Part 1 Standard May 2011 1 Designs
27 IS 10427(Part 2):2006 Designs for industrial experimentation: Part 2 Orthogonal May 2011 arrays (First Revision)
28IS 10645:2004 Methods for estimation of process capability and process Mar 2014 performance(Second Revision)
29 IS 11843-1:1997 Capability of detection : Part 1 Terms & Definitions Jan 2010 / ISO
30 IS 11843-2::2000 Capability of detection : Part: 2 Methodology in the linear Jan 2010 / ISO calibration case
31 IS 11843-3:2003 Capability of detection :Part 3 Methodology for Jan 2010 / ISO determination of the critical value for the response variable when no calibration data are used
32 IS 11843-4:2003 Capability of detection : Part 4 Methodology for Jan 2010 / ISO comparing the minimum detectable value with a given value
33 IS 12347:1988 Analysis of means - A graphical procedure Apr 2013
34 IS 12348:1988 Use of probability papers Apr 2013
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
7
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 35 * IS 13131:1991 Statistical tolerance interval - Methods for determination May 2011
36 IS 14277:1996 Statistical interpretation of test results - Estimation of Apr 2013 mean, standard deviation, regression coefficient - Confidence interval
37IS 14977:2001 Control charts based on inspection by gauging May 2011
38 IS 14978:2002 New seven tools for quality management Apr 2013
39 IS 15202(Part 1):2002 Guidelines for implementation of statistical process Apr 2013 / ISO 11462-1:2001 control (SPC): Part 1 Elements of SPC
40 IS 15202(Part 2):2012 Guidelines for implementation of statistical process / ISO 11462-2:2010 control (SPC) : Part 2 Catalogue of tools and techniques
41 IS 15280:2003 Quality function deployment Apr 2013 42 IS 15393 (Part 1):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-1:1994 methods and results Part 1: General principles and Definitions 43 IS 15393 (Part 2):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-2:1994 methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method 44 IS 15393 (Part 3):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-3:1994 methods and results Part 3: Intermediate measures of the precision of a standard measurement method 45 IS 15393 (Part 4):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-4:1994 methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method 46 IS 15393 (Part 5):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-5:1994 methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method 47 IS 15393 (Part 6):2003 Accuracy (trueness and precision) of measurement Apr 2013 /ISO 5725-6:1994 methods and results Part 6: Use in practice of accuracy values
48 IS 15431:2003 Seven basic tools for quality management Mar 2014
49 IS 15436(Part 1):2004 Statistical aspects of sampling from bulk materials: Part 1 Mar 2014 / ISO 11648-1:2003 General principles
50 IS 15550:2005 Failure mode and effects analysis Aug 2010
51 ** IS 15564:2005 Bench marking Aug 2010
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
8
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 52 IS 16123 (Part 1):2013 Quantitative methods in process improvement – / ISO 13053-1:2011 Six sigma – Part 1: The DMAIC methodology 53 IS 16123 (Part 2):2013 Quantitative methods in process improvement – Six sigma -
/ ISO 13053-2:2011 Part 2 Tools and techniques
FINALISED DRAFTSTANDARDS UNDER PRINT
1. MSD 3 (429)
/ ISO 24153:2009
Random sampling and randomization procedures (First Revision of IS 4905)
2. MSD 3 (430)
/ ISO 10725:2000
Acceptance sampling plans and procedures for the inspection of bulk materials
3. MSD 3 (431) / ISO 11648-2:2001]
Statistical aspects of sampling from bulk materials : Part 2 Sampling of particulate materials
4. MSD 3 (432)
/ ISO 2859-3:2005
Sampling procedures for inspection by attributes: Part 3 Skip lot sampling procedure
5. MSD 3 (434)
/ ISO 2859-5:2005
Sampling procedures for inspection by attributes: Part 5 System of sequential sampling plans indexed by acceptable quality limit (AQL) for lot-by-lot inspection
6. MSD 3 (435)
/ ISO 8422:2006
Sequential sampling plans for inspection by attributes
7. MSD 3 (439)
/ ISO 16269-4: 2010
Statistical interpretation of data - Detection and treatment of outliers (First Revision of IS 8900)
8. MSD 3 (440)
/ ISO 11453:1996
Statistical interpretation of data -- Tests and confidence intervals relating to proportions
9. MSD 3 (441)
/ ISO 16269-7:2001
Statistical interpretation of data : Part 7 Median -- Estimation and confidence intervals
10. MSD 3 (442)
/ ISO 16269-8:2004
Statistical interpretation of data : Part 8 Determination of prediction intervals
11.. MSD 3 (443) /
/ ISO 28640:2010
Random variate generation methods
12.. MSD 3 (444)12 / ISO 10576-1:2003
Statistical methods -- Guidelines for the evaluation of conformity with specified requirements : Part 1 General principles
13. MSD 3 (445)
/ ISO 11095:1996
Linear calibration using reference materials
14. MSD 3 (446)
/ ISO 11843-5:2008
Capability of detection : Part 5 Methodology in the linear and non-linear calibration cases
15. MSD 3 (448)
/ ISO 21748:2010
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
16. MSD 3 (433) / ISO 2859-4:2002
Sampling procedures for inspection by attributes: Part 4 Procedures for assessment of declared quality levels
17. MSD 3 (436) / ISO 28801:2011
Double sampling plans by attributes with minim al sample sizes, indexed by producer’s risk quality (PRQ) and consumer’s risk quality (CRQ)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
9
DRAFT STANDARDS COMPLETED WIDE CIRCULATION
1. MSD 3 (447) / ISO 13528:2005
Statistical methods for use in proficiency testing by inter-laboratory comparisons
2. MSD 3 (447) / ISO 13528:2005
Statistical methods for use in proficiency testing by inter-laboratory comparisons
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1. MSD 3(480)C) / ISO 3534-3
Statistics-Vocabulary and symbols:Part 3Design of experiments [Third Revision of IS 7920(Part 3)]
2. MSD 3(481) / ISO 3534-4
Statistics – Vocabulary and symbols:Part 4 Survey sampling
3. MSD 3(482) / ISO 16269-6
Statistical tolerance interval – Methods for determination (First Revision of IS 13131)
4. MSD 3 (477)
Statistical tests of significance–Part 1:Normal, t& F tests [Fourth Revision of IS 6200 (Part 1)]
5. MSD 3 (478)
Presentation of statistical data: Part 1 Tabulation and summarization [Third Revision of IS 7200(Part 1)]
6. MSD 3 (479)
Presentation of statistical data: Part 2 Diagrammatic representation of data [(First Revision of IS 7200(Part 2]
10
MSD 4 MANAGEMENT AND PRODUCTIVITY SECTIONAL COMMI TTEE
SCOPE - Standardization in the field of Management including organization,operations, supply chain, technology, knowledge, risk, project, programme, portfolio, marketing, value engineering, reverse engineering with a view to disseminate its knowledge and promote its application.
STANDARDS PUBLISHED Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
1 IS 6363:1997 Glossary of terms in work study (First Revision) Aug 2010 1
2 IS 7337:2010 Project management – Glossary of terms (Second Revision)
3 IS 9990:1998 Glossary of terms in terotechnology (First Revision) Jul 2009 4IS 10400:1993 Glossary of terms in inventory control Aug 2013 (ThirdRevision)
5 IS 11500:1985 Methodology for the calculation of relaxation allowance Aug 2010
6 IS 11810:2003 Guidelines to establish a value engineering activity Feb 2013 (First Revision)
7 IS 12301:1988 Code of practice for establishing and operating quality Jul 2009 circles
8 IS 13407(Part 1):1992 Techniques of work study: Part 1 Method study Aug 2010
9 IS 13407(Part 2):1995 Techniques of work study: Part 2 Work measurement Aug 2010
10 * IS 14580(Part 1):1998 Use of network analysis for project management: Jul 2009 Part 1 Management, planning, review, reporting and termination procedures
11 * IS 14580(Part 2):2006 Use of Network analysis for project management :Part 2 May 2011 Use of graphic techniques
12 * IS 14581:2006 Guidelines for formulation and operation of a suggestion May 2011 scheme in an organization (First Revision) 13 IS 15363(Part 1):2003 Guide to terotechnology : Part 1 Introduction to Feb 2013 terotechnology
14 IS 15363(Part 2):2003 Guide to terotechnology : Part 2 Introduction to Feb 2013 techniques and applications
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
11
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
15 IS 15363(Part 3):2004 Guide to terotechnology (the economic management of Jul 2009 assets): Part 3 Guide to the available techniques
16 IS 15446(Part 1):2004 Guide to production control: Part 1 Introduction Jul 2009
17 IS 15446(Part 2):2004 Guide to production control: Part 2 Production Jul 2009 programming
18 IS 15446(Part 3):2004 Guide to production control: Part 3 Ordering methods Jul 2009
19 IS 15446(Part 4):2004 Guide to production control: Part 4 Dispatching (shop- Jul 2009 floor control)
20 IS 15446(Part 5):2004 Guide to production control: Part 5 Relationship between Jul 2009 production control and other management function
21 IS 15446(Part 6):2004 Guide to production control: Part 6 Computer aided Jul 2009 production control
22 IS 31000:2009 Risk Management - Principles and Guidelines / ISO
FINALISED DRAFTSTANDARDS UNDER PRINT
1. MSD 4 (455) /ISO 21500 \
Guidance on project management
2. MSD 4 (454) Glossary of terms in technology management
3. MSD 4(456) Glossary of terms in supply chain management
4. MSD 4(462) Risk Management - Vocabulary DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1. MSD 4 (471)/
ISO/TR 31004:2013 Risk Management – Guidance for the Implementation of ISO 31000
DRAFT STANDARDS UNDER PREPARTION
1 MSD 4 (457) Use of network analysis for project management: Part 1 Management, planning, review, reporting and termination procedures (First Revisionof IS 14580(Part 1):1998)
2 MSD 4 (458) Use of Network Analysis for Project Management Part 2 Use of graphic techniques (First Revision of IS 14580(Part 2):2006)
3 MSD 4 (452) Guidelines for formulation and operation of a suggestion scheme in an organization (First Revision of IS 14581:2006)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
12
MSD 5 DOCUMENTATION AND INFORMATION SECTIONAL COM MITTEE
SCOPE - Standardization of Practices relating to libraries, documentation and information centers, indexing and abstracting services, bibliographic formats, conservation and preservation of print and non-print medium, archives, information science, graphic technology, document imaging applications, data processing, style manuals, aspects relevant to processing, handling and publication of documents
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 12:2005 Guide for drafting and presentation of Indian Feb 2011 Standards (Fourth revision)
2 IS 18:1999 Information and documentation - Rules for the Sep 2009 / ISO 4:1997 abbreviation of title words and titles of publications (Third Revision)
3 IS 382:2003 Practice for alphabetical arrangement(First Revision) Dec 2012
4IS 795:2013 Guide for preparation of abstracts (SecondRevision) Feb 2011
5 ** IS 796:1966 Glossary of cataloguing terms (First Revision) Feb 2011
6 IS 1275:1976 Rules for making alphabetical indexes (First Revision) Feb 2011
7 ** IS 1358:1967 Practice for layout of library catalogue code (First Feb 2011 Revision)
8 ** IS 2381(Part 1):2009 Information and Documentation - Bibliographic / ISO 690:1987 references: Part 1 Content, form and structure (Second Revision) 9 IS 2381(Part 2):2009 Information and Documentation - Bibliographic references / ISO 690-2:1997 : Part 2 Electronic documents or parts thereof (Second Revision)
10 ** IS 2550:1963 Glossary of classification terms Dec 2012
11 IS 3083:1985 Code of practice for the processing of Feb 2011 microtransparencies (microfilms and microfiche) (silver halide) (First Revision)
12 IS 3130:1985 Code of practice for handling and storage of Dec 2012 microtransparencies (microfilm and microfiche) (silver halide) (Second Revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
13
Date Amd.
13 IS 4731:2009 Guide for preparation of manuscript of an article in a learned periodical (First Revision)
14 IS 6299:1971 Guide for handling, testing and storage of monochrome Dec 2012 2 photographic prints
15 IS 6666:2007 Recommendations for frequency notation for periodical Dec 2012 publications(First Revision)
16 IS 7150:1974 Specification for library catalogue and abstract card Feb 2011 1
17 IS 7900:2007 Data elements and interchange formats - Information Dec 2012 / ISO 8601:2004 interchange - Representation of dates and times (Third Revision)
18 IS 8310:2006 Information and documentation - International standard Dec 2012 / ISO 2108:2005 book number (ISBN) (Second Revision)
19 IS 9400:1980 Guide for the preparation of bibliographic description Dec 2012 1 sheet for technical reports
20 IS 9450:1980 Guidelines for placement of images in roll microfilm Feb 2011 21 IS 10101:2012 Information and Documentation - International Standard / ISO 3297:2007 Serial Number (ISSN) (Second Revision)
22 IS 10454:1983 Guidelines for presentation of translations Dec 2012 | ISO 2384:1977 23 IS 10455:1983 Guidelines for presentation of abstract sheets in serial Dec 2012 | ISO 5122:1979 publications
24 IS 10456:2003 Density of silver-gelatin type microforms - Specification Dec 2012 (First Revision)
25 IS 11370:2008 Guide for data elements and record format for computer Mar 2014 based bibliographical data bases for bibliographic description of different kinds of documents (First Revision)
26 IS 12879 (Part 1):2012 Microfilming of technical drawings and other drawing / ISO 3272-1:2003 office documents: Part 1 Operating procedures (First Revision)
27 IS 12879(Part 2):1999 Microfilming of technical drawings and other drawing Sep 2009 / ISO 3272-2:1994 office documents: Part 2 Quality criteria and control of 35 mm silver gelatin microfilms (First Revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
14
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
28 IS 12879(Part 3):2004 Microfilming of technical drawings and other drawing Sep 2009 / ISO 3272- 3:2001 office documents:Part 3 Aperture card for 35 mm microfilm(First Revision)
29 IS 12879(Part 4):1999 Microfilming of technical drawings and other drawing Sep 2009 / ISO 3272-4:1994 office documents: Part 4 Microfilming of drawings of special and exceptional elongated sizes
30 **IS 12940:1990 Documentation - Library statistics - Guide Dec 2012
31 IS 13550:2003 Information and documentation - Vocabulary (First Dec 2012 / ISO 5127:2001 Revision)
32 IS 14720:1999 Documentation - Guidelines for the establishment and Sep 2009 / ISO 2788:1986 development of monolingual thesauri
33 *IS 14836(Part 1):2009 Codes for the representation of names of countries and / ISO 3166-1:2006 their subdivisions: Part 1 Country codes (First Revision)
34 IS 14873:2012 Information and documentation -- Format for information / ISO 2709:2008 exchange (First Revision)
35 IS 15027(Part 1):2001 Micrographics - Vocabulary: Part 1 General terms Feb 2011 / ISO 6196-1:1993 36 IS 15027(Part 2):2001 Micrographics - Vocabulary: Part 2 Image positions and Dec 2012 / ISO 6196-2:1993 methods of recording
37 IS 15027(Part 3):2003 Micrographics - Vocabulary: Part 3 Film Processing Dec 2012 / ISO 6196-3:1997
38 IS 15027(Part 4):2003 Micrographics - Vocabulary: Part 4 Materials and Dec 2012 / ISO 6196-4:1998 packaging
39 IS 15027(Part 5):2001 Micrographics - Vocabulary:Part 5 Quality of images, Dec 2012 / ISO 6196-5:1987 legibility, inspection
40 IS 15027(Part 6):2001 Micrographics - Vocabulary: Part 6 Equipment Dec 2012 / ISO 6196-6:1992 41 IS 15027(Part 7):2001 Micrographics - Vocabulary: Part 7 Computer Dec 2012 / ISO 6196-7:1992 micrographics
42 IS 15027(Part 8):2001 Micrographics - Vocabulary: Part 8 Use Dec 2012 / ISO 6196-8:1998 43 IS 15027(Part 10):2001 Micrographics - Vocabulary: Part 10 Index Dec 2012 / ISO 6196-10:1999 44 IS 15281:2003 Information and documentation - International Standard Dec 2012 / ISO 10444:1994 Technical Report Number (ISRN)
45 IS 15282:2003 Entries in a directory of periodicals Dec 2012
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
15
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
46 IS 15283:2003 Layout of an entry in a union catalogue of periodical Dec 2012 publication
47 IS 15339:2003 Public library - Guidelines Dec 2012
48 IS 15389:2003 GEDI - Generic Electronic Document Interchange Dec 2012 / ISO 17933:2000 49 IS 15390:2003 Information and documentation - Information retrieval Dec 2012 / ISO 23950:1998 (Z39.50) - Application service definition and protocol specification
50 IS 15991:2012 Information and documentation -- Bibliographic data / ISO 8459:2009 element directory for use in data exchange and enquiry
51 IS 15992:2012 Information and documentation -- The Dublin Core / ISO 15836:2009 metadata element set
52 IS 15993:2012 Information and documentation -- Schema for holdings / ISO 20775:2009 information
53 IS 15994 (Part 1):2012 Information and documentation -- Records management / ISO 23081-1:2006 processes -- Metadata for records -- Part 1: Principles
54 IS 15994 (Part 2):2012 Information and documentation -- Records management processes / ISO 23081-2:2009 -- Metadata for records -- Part 2: Conceptual and implementation issues
55 IS 15995:2012 Information and documentation -- MarcXchange / ISO 25577:2008 56 IS 15996:2012 Information and documentation -- Library performance / ISO 11620:2008 indicators
57 IS 16500:2012देवनागर�ल�पतथा�हदं�वत�नी
FINALISED DRAFTSTANDARDS UNDER PRINT 1 MSD 5 (407)
/ISO 2146:2010
Information and documentation -- Registry services for libraries and relatedorganizations
2 MSD 5 (408) /ISO 9707:2008
Information and documentation -- Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
3 MSD 5 (409) /ISO 10957:2009
Information and documentation -- International standard music number (ISMN)
4 MSD 5 (410) /ISO/TR 12033:2009
Document management -- Electronicimaging -- Guidance for the selection of document image compression methods (available in English only)
5 MSD 5 (411) /ISO 15511:2009
Information and documentation -- International Standard Identifier for Libraries and RelatedOrganizations (ISIL)
16
6 MSD 5 (412) /ISO/TR 28118:2009
Information and documentation -- Performance indicators for national libraries
7 MSD 5 (413) /ISO 28500:2009
Information and documentation -- WARC file format
8 MSD 5 (414) /ISO 29861:2009
Document management applications -- Quality control for scanning office documents in colour
9
MSD 5(400) / ISO 32000-1:2008
Document management -- Portable document format -- Part 1: PDF 1.7
10 MSD 5(459) / ISO 30300:2011
Information and documentation – Management systems for records – Fundamentals and vocabulary
11 MSD 5(460) / ISO 30301:2011
Information and documentation – Management systems for records – Requirements
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1. MSD 5(475)/ ISO 690:1987
Information and documentation – Guidelines for bibliographic reference and citations to information resources (Revision of IS 2381(Part 1):2009
2. MSD 5(476) / ISO 3166-1:2006
Codes for the representation of names of countries and their subdivision:Part 1 Country code (second revision of IS 14836(Part 1):2009
P-DRAFT UNDER PREPARATION
1 . MSD 5(___) Guidelines for establishing multiple grades/ratings in
Indian Standards
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
17
MSD 6 PUBLICATIONS AND GRAPHIC TECHNOLOGY SECTION AL COMMITTEE SCOPE - Standardization of Practices relating to book production, illustrations, finishing, style manuals, graphic technology and any other aspects relevant to publication of documents and graphic technology
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 4:1963 Guide for layout of learned periodicals (revised) Dec2012
2 IS 790:1987 Guidelines for preliminary pages of a book (first Dec 2012 1 revision) (superseding IS 791:1956, IS 792:1964 and IS 794:1956)
3 IS 1250:1958 Proof corrections for printers and authors Mar 2014
4 IS 3050:1965 Code of practice for reinforced binding of library Dec 2012 1 books and periodicals
5 IS 6298:1971 Guide for selection of type and page layout in textbooks Dec2012
6 IS 6660:1972 Guide for illustrations in books Dec2012
7 IS 7140:1971 Symbols and notations for correction of illustrations Dec 2012 and illustration proofs
8 IS 7160:2003 Guide for print area, margins and type sizes for Dec2012 textbooks (First Revision of various parts of IS 7160)
9 IS 7400:1974 Guide for preparation and production of textbooks Feb2008
10 IS 8010(Part 1):1976 Guidelines for preparation of technical reports: Part Dec 2012 1 Research and development reports
11 IS 8010(Part 2):1982 Guidelines for preparation of technical reports: Part Dec 2012 2 Feasibility reports
12 IS 8010(Part 3):1987 Guidelines for preparation of technical reports: Part Dec 2012 3 Industrial potential survey reports
13 IS 9637:1980 Guidelines for presentation of information in Dec2012 technical manuals
14 IS 11956:1987 Guidelines for the preparation of trade catalogues Dec 2012
15 IS 11957:1987 Guidelines for contents list of periodicals Feb2011 | ISO 18:1981 16 ** IS 12000(Part 1):1987 Guide for paper spoilage and wastage for printing Dec 2012 industry:Part 1 Sheetfed, letterpress and offset processes
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
18
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
17 ** IS 15306:2003 Printing & Publishing - Glossary of terms Dec2012
18 IS 15963(Part 1):2012 Graphic Technology - Process Control for the / ISO 12647-1:2004 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 1 Parameters and Measurement Methods
19 IS 15963(Part 2):2012 Graphic Technology - Process Control for the / ISO 12647-2:2004 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 2 Offset Lithographic Processes
20 IS 15963(Part 3):2012 Graphic Technology - Process Control for the / ISO 12647-3:2005 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 3 Coldset Offset Lithography on Newsprint
21 IS 15963(Part 4):2012 Graphic Technology - Process Control for the / ISO 12647-4:2005 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 4 Publication Gravure Printing
22 IS 15963(Part 5):2012 Graphic Technology - Process Control for the / ISO 12647-5:2001 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 5 Screen Printing
23 IS 15963(Part 6):2012 Graphic Technology - Process Control for the / ISO 12647-6:2006 Production of Half-Tone Colour Separations, Proofs and Production Prints Part 6 Flexographic Printing
FINALISED DRAFT STANDARDS UNDER PRINT
1 MSD 6(416) Graphic technology -- Process control for the / ISO 12647-7:2007 production of half-tone colour separations, proof and production prints -- Part 7: Proofing processes working directly from digital data
2 MSD 6(417) Graphic technology -- Prepress digital data / ISO 15930-1:2001 exchange -- Use of PDF -- Part 1: Complete exchange using CMYK data (PDF/X-1 and PDF/X-
3 MSD 6(418) Graphic technology - Exchange format for colour / ISO 28178:2009 and process control data using XML or ASCII text
DRAFTSTANDARDS FINALIZED FOR PRINTING
1 MSD 6(415) Graphic technology -- Displays for colour proofing -- / ISO 12646:2008 Characteristics and viewing conditions
2 MSD 6 (461) Graphic technology -- Process control for the / ISO 12647-8:2012 production of half-tone colour separations, proof and production prints -- Part 8 Validation print processes working directly from digital data
P-DRAFT UNDER PREPARATION
1 .MSD 6(386) Guide for paper spoilage and wastage for printing industry: Part 1 Sheetfed, letterpress and offset processes [First Revision of IS 12000 (Part 1)]
2. MSD 6 () Printing & Publishing - Glossary of terms (First Revision of IS 15306)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
19
MSD 7 BANKING AND FINANCIAL SERVICES SECTIONAL CO MMITTEE
SCOPE -To formulate Indian Standards on banking and other financial services including standards on quality assurance requirements for these services.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 11179:2005 Information processing - Magnetic ink character Feb 2011 / ISO 1004:1995 recognition - Print specification (First Revision)
2 IS/ ISO 13616-1:2007 Financial services - International Bank Account Number Mar 2014 (IBAN) -- Part 1: Structure of the IBAN
3 IS/ ISO 13616-2:2007 Financial services - International Bank Account Number Mar 2014 (IBAN) -- Part 2: Role and responsibilities of the Registration Authority
4 IS 14943(Part 2):2001 Financial transaction card originated messages - Feb 2011 / ISO 8583- 2:1998 Interchange message specifications: Part 2 Application and Registration procedures for Institution Identification Codes (IIC)
5 IS 14943(Part 3):2007 Financial transaction card originated messages - Mar 2013 / ISO 8583-3:2003 Interchange message specifications: Part 3 Maintenance procedures for codes (First Revision)
6 * IS 15042(Part 1):2006 Banking - Personal Identification Number (PIN) Feb 2011 / ISO 9564-1:2002 management and security - Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems (First Revision)
7 IS 15042(Part 2):2007 Banking - Personal Identification Number management Mar 2013 / ISO 9564-2:2005 and security: Part 2 Approved algorithm(s) for PIN encipherment (First Revision)
8 IS 15042(Part 3):2011 Banking - Personal Identification Number (PIN) management / ISO 9564-3:2003 and security - Part 3: Requirements for offline PIN handling in ATM and POS systems
9 IS 15042(Part 4):2011 Banking – Personal Identification Number management / ISO/TR 9564-4:2004 and security – Part 4: Guidelines for PIN handling in open Networks 10 IS 15043(Part 1):2001 Financial transaction cards - Messages between the Mar 2013 / ISO 9992-1:1990 integrated circuit card and the card accepting device: Part 1 Concepts and structures 11 IS 15254:2002 Securities - Numbering of certificates Mar 2013 / ISO 9019:1995 12 IS 15055:2001Bank operations - Standard scheme for drawing lists / ISO 6536:1981 13IS 15256(Part 1):2011 Banking - Key management (Retail) - Part 1: Principles / ISO 11568-1:2005 (First Revision) * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
20
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
14 * IS 15256(Part 2):2011 Banking - Key management (retail) - Part 2: / ISO 11568-2:2005 symmetric ciphers, their key management and life cycle
15 *IS 15256(Part 4):2013 Banking - Key management (retail) - Part 4: Mar 2013 / ISO 11568-4:2007Asymmetric Cryptosystems – Key Management and Life Cycle (First Revision)
16 * IS 15413:2013 Codes for the representation of currencies and funds Mar 2013 1 / ISO 4217:2008
17 IS 15415:2003 Securities and related financial instruments - International Mar 2013 / ISO 6166:2001 securities identification numbering system (ISIN)
18 IS 15586:2005 Securities and related financial instruments – Feb 2011 / ISO 10962:2001 Classification of Financial Instruments (CFI code)
19 IS 15587(Part 1):2005 Securities - Scheme for messages (Data Field Dictionary Feb 2011 / ISO 15022-1:1999 ) Part 1: Data field and message design rules and guidelines 20 IS 15587(Part 2):2005 Securities - Scheme for messages (Data Field Dictionary Feb 2011 / ISO 15022-2:1999 ) Part 2: Maintenance of the Data Field Dictionary and Catalogue of Messages
21 IS 15650:2006 Quality Management Systems - Guidelines for the Feb 2011 implementation of IS/ISO 9001:2000 for Banking Industry
22 * IS 15899:2011 Banking – Requirements for message authentication / ISO 16609:2004
23 IS 16005 (Part 1):2013 Banking -- Secure cryptographic devices (retail) -- Part / ISO 13491-1:2007 1: Concepts, requirements and evaluation methods
24 IS 16005 (Part 2):2013 Banking Secure cryptographic devices (retail) – Part 2: / ISO 13491-2:2005 Security compliance checklists for devices used in magnetic stripe card systems 20022 Repository
25 IS 16006:2013Securities and related financial instruments - Codes for /ISO 10383:2003 exchanges and Market Identification (MIC) 26 IS 16007 : 2013 Financial services -- Key management related data / ISO 13492:2007 element -- Application and usage of ISO 8583 data elements 53 and 96
27 IS/ISO 20022-1:2004 Financial services -- UNIversal Financial Industry message scheme -- Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO
28 IS/ISO 20022-2:2007 Financial services -- UNIversal Financial Industry message scheme: Part 2 Roles and responsibilities of the registration bodies
29 IS/ISO/TS 20022-3:2004 Financial services -- UNIversal Financial Industry message scheme -- Part 3: ISO 20022 Modelling guidelines
30 IS/ ISO/TS 20022-4:2004 Financial services -- UNIversal Financial Industry message scheme -- Part 4: ISO 20022 XML design rules
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
21
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. 31 IS/ ISO/TS 20022-5:2004 Financial services -- UNIversal Financial Industry message scheme -- Part 5: ISO 20022 Reverse engineering 32 IS/ ISO 21188:2006 Public Key Infrastructure for financial services - Practices and policy framework
33 SP 69:2012 Financial Services – Information Security Guidelines / ISO/TR 13569:2005 (First Revision)
FINALISED DRAFTSTANDARDS UNDER PRINT
1 .MSD 7(376) Financial transaction card originated messages - / ISO 8583-1:2003 Interchange message specifications -- Part 1: Messages, data elements and code values
2 .MSD 7(377) Retail financial services - Merchant category codes / ISO 18245:2003
3 .MSD 7(421) Certificate management for Financial services -- Part 1: / ISO 15782-1:2009 Public key certificates
4 .MSD 7(422) Banking -- Certificate management -- Part 2: Certificate / ISO 15782-2:2001 extensions
5 .MSD 7(423) Banking -- Banking telecommunication messages -- / ISO 9362:2009 Business identifier code (BIC)
6 .MSD 7(424) Financial services -- Core banking -- Structured creditor / ISO 11649:2009 reference to remittance information
7 MSD 7 (451) Banking - Personal Identification Number (PIN) / ISO 9564-1:2011 management and security - Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems [Second Revision of IS 15042(Part 1)]
DRAFTS FINALIZED FOR PRINTING
1. MSD 7(468)
/ISO 16609:2012
Banking requirements for message authentication using symmetric techniques (First Revision of IS 15899)
2. MSD 7(469)/
ISO 11568-2
Financial services – Key management (retail) – Part 2: Symmetric ciphers, their key Management and life cycle
3. MSD 7(476)
/ISO 11568-2:2012
Banking – Key management (retail):Part 2 Symmetric ciphers,theirkey management and life cycle (First revisionof IS 15256(Part 2)
DRAFT STANDARDS COMPLETED WIDE CIRCULATION
1 MSD 7(381)/ .Financial services – Biometrics – Security framework ISO 19092:2008
2 .MSD 7(449) Financial services -- Universal Financial Industry ISO/20022-6:2012 message scheme -- Part 6: Message Transport Characteristics
DRAFTS STANDARDS APPROVED FOR WIDE CIRCULATION
22
1 MSD 7 (486)/
ISO 1004-1:2013
Information processing – Magnetic ink character recognition – Part 1: Print specifications for E13B
2 MSD 7 (487)/
ISO 1004-2:2013
Information processing – Magnetic ink character recognition – Part 2: Print specifications for CMC7
3 MSD 7 (488)/
ISO 6166:2013
Securities and related financial instruments -- International securities identification numbering system (ISIN)
4 MSD 7 (489)/
ISO 20022-1:2013
Financial services -- UNIversal Financial Industry
message scheme -- Part 1: Metamodel
5 MSD 7 (490)/
ISO 20022-2:2013
Financial services – Universal Financial industry message scheme – Part 2: UML profile
6 MSD 7 (491)/
ISO 20022-3:2013
Financial services – Universal Financial industry message scheme – Part 3: Modelling
7 MSD 7 (492)/
ISO 20022-4:2013
Financial services – Universal Financial industry message scheme – Part 4: XML Schema generation
8 MSD 7 (493)/
ISO 20022-5:2013
Financial services – Universal Financial industry message scheme – Part 5: Reverse engineering
9 MSD 7 (494)/
ISO 10383:2012
Securities and related Financial instruments – Codes for exchanges and market identification (MIC)
10 MSD 7 (495)/
ISO 17442:2012
Financial services – Legal Entity Identifier (LEI)
11 MSD 7 (496)/
ISO 20022-6:2013
Financial services – Universal Financial industry message scheme – Part 6: Message transport characteristics
12 MSD 7 (497)/
ISO 20022-7:2013
Financial services – Universal Financial industry message scheme – Part 7: Registration
13 MSD 7 (498)/
ISO 20022-8:2013
Financial services – Universal Financial industry message scheme – Part 8: ASN.1 generation
23
MSD 9 EDUCATION, EDUCATION SERVICES AND OTHER RELA TED SERVICES SECTIONAL COMMITTEE SCOPE - To formulate Indian Standards on Education, Education services and other related services including, standards on Quality management for these services.
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. DRAFT STANDARD COMPLETED WIDE CIRCULATION 1 MSD 9(450) Learning services for non-formal education and training /ISO 29990:2010 -- Basic requirements for service providers DRAFT STANDARD UNDER PREPARATION 1 MSD 9() Quality management systems for Educational Organizations * INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
24
MSD 10SOCIAL RESPONSIBILITY SECTIONAL COMMITTEE
SCOPE :To formulate Indian Standards in the field of Social Responsibility, Social Accountability and other social issues
Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd. STANDARDS PUBLISHED
1 IS 15900:2010 Guidance on Fraud and Corruption Control by an Organization 2 IS 16001:2012 Social Accountability at the Work Place – Requirements (First Revision)
3 IS 16010:2012 Good governance - Guidance
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
25
MSD 12 RESOURCE MANAGEMENT SECTIONAL COMMITTEE
SCOPE - Standardization in the field of Management including Organization, Asset, Marketing Resource STANDARDS PUBLISHED Sl. No. IS Number/ DOC Number Title Reaffirm No. of Date Amd.
1 IS 13174(Part 1):1991 Life cycle costing : Part 1 Terminology Aug 2010
2 IS 13174(Part 2):1994 Life cycle costing: Part 2 Methodology Jul 2009
3 * IS 15198:2002 Glossary of terms in HRD Oct 2012 4 IS 15915:2012Glossary of terms in knowledge management
FINALISED DRAFTSTANDARD UNDER PRINT
1. MSD 12 (428) Glossary of terms in HRD (First Revision of IS 15198)
DRAFTSTANDARDS APPROVED FOR WIDE CIRCULATION
1 MSD 12 (483)/
ISO 55000
Asset management — Overview, principles and terminology
2 MSD 12 (484)/ ISO 55001
Asset management — Management systems — Requirements
3 MSD 12 (485)/ ISO 55002
Asset management — Management systems — Guidelines for the application of ISO 55001
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
26
MSD 13 TOURISM AND RELATED SERVICES SECTIONAL COMMI TTEE
SCOPE - Standardization in the area of tourism and related services viz. diving services, health tourism, tourist information and reception services at tourist information offices, golf services, beaches, natural protected areas, adventure tourism, yacht harbors, industrial tourism, environmentally friendly accommodation establishment and rural tourism.
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION
1 ISO 18513:2003 Tourism services -- Hotels and other types of tourism accommodation – Terminology
2 ISO/TR 21102:2013 Adventure tourism -- Leaders -- Personnel competence
3 ISO 21101 Adventure tourism – Safety management systems – Requirements
4 ISO 21103 Adventure tourism – Information for participants
5 ISO 24801-1 Recreational diving services – Requirements for the training of recreational scuba divers – Part 1: Level 1 – Supervised diver
6 ISO 24801-2 Recreational diving services – Requirements for the training of recreational scuba divers – Part 2: Level 2 – Autonomous diver
7 ISO 24801-3 Recreational diving services – Requirements for the training of recreational scuba divers – Part 3: Level 3 – Dive leader
8 ISO 24802-1 Recreational diving services – Requirements for the training of scuba instructors – Part 1: Level 1
9 ISO 24802-2 Recreational diving services – Requirements for the training of scuba instructors – Part 2: Level 2
10 ISO 14785 Tourist information offices -- Tourist information and reception services -- Requirements
27
ANNEX I
LIST OFSTANDARDS WITHDRAWN / SUPERSEDED
Sl. No. IS Number/ DOC Number Title
1 IS 791:1956 Specification for half-title-leaf of a book (tentative) (Superseded by IS 790:1987)
2 IS 792:1964 Specification for title-page and back of title-page of a book (revised) (Superseded by IS 790:1987)
3 IS 793:1956 Practice for Author statement in the title-page of a book 4 IS 794:1956 Practice for table of contents (tentative) (Superseded by IS 790:1987) 5 IS 5420(Part 1):1969 Guide on precision of test methods: Part 1 Principles and applications (Superseded by IS 15393) 6 IS 5420(Part 2):1973 Guide on precision of test methods: Part 2 Inter laboratory testing (Superseded by IS 15393) 7 IS 7160(Part 1):1974 Guide for print area, margins and type sizes for textbooks: Part 1 Textbooks in English
8 IS 7160(Part 2):1974 Guide for print area, margins and type sizes for textbooks: Part 2 Textbooks in Hindi
9 IS 7160(Part 3):1977 Guide for print area, margins and type sizes for textbooks: Part 3 Textbooks in Malayalam
10 IS 7160(Part 4):1977 Guide for print area, margins and type sizes for textbooks: Part 4 Textbooks inTelegu
11 IS 7160(Part 5):1977 Guide for print area, margins and type sizes for textbooks: Part 5Textbooks in Kannada
12 IS 7160(Part 6):1977 Guide for print area, margins and type sizes for textbooks: Part 6 Textbooks in Tamil
13 IS 7160(Part 7):1980 Guide for print area, margins and type sizes for textbooks: Part 7 Textbooks in Bengali
14 IS 7200(Part 3):1982 Presentation of statistical data : Part 3 - Management information systems - quality control
15 IS/ISO 8402:1994 Quality management and quality assurance - Vocabulary (First Revision) (Withdrawn) (Superseded by IS/ISO 9000:2000)
16 IS/ISO 9000(Part 1):1994 Quality management and quality assurance standards: Part 1 Guidelines for
selection and use 17 IS/ISO 9000(Part 2):1997 Quality management and quality assurance standards: Part 2 Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 (First Revision) (Withdrawn)
18 IS/ISO 9001:1994 Quality systems - Model for quality assurance in design/development, production,installation and servicing (First Revision) (Superseded by IS/ISO 9001:2000)
19 IS/ISO 9002:1994 Quality systems - Model for quality assurance in production, installation and servicing (First Revision)(Superseded by IS/ISO 9001:2000)
20 IS/ISO 9003:1994 Quality systems - Model for quality assurance in final inspection and test (First Revision) (Superseded by IS/ISO 9001:2000)
28
Sl. No. IS Number/ DOC Number Title
21 IS/ISO 9004(Part 1):1994 Quality management and quality systems elements - Part 1 Guidelines
22 IS/ISO 9004(Part 2):1991 Quality management and quality systems elements - Part 2 Guidelines for
23 IS/ISO 9004(Part 3):1993 Quality management and quality systems elements - Part 3 Guidelines for processed materials
24 IS/ISO 9004(Part 4):1993 Quality management and quality system elements: Part 4 Guidelines for quality improvement
25 IS/ISO 10011(Part 1):1990 Guidelines for auditing quality systems: Part 1 Auditing (Superseded by IS/ISO 19011:2002)
26 IS/ISO 10011(Part 2):1991 Guidelines for auditing quality systems: Part 2 Qualification criteria for quality systems auditors (Superseded by IS/ISO 19011:2002)
27 IS/ISO 10011(Part 3):1991 Guidelines for auditing quality systems: Part 3 Management of audit programmes (Superseded by IS/ISO 19011:2002)
28 IS/ISO 10012(Part 1):1992 Quality assurance for measuring equipment: Part 1 Metrological confirmation system for measuring equipment (Superseded by IS/ISO 10012:2003)
29 IS/ISO 10012(Part 2):1997 Quality assurance for measuring equipment: Part 2 Guidelines for control of measurement process (Superseded by IS/ISO 10012:2003)
30 IS 10200:1982 Specification for A6 size microfiche (Withdrawn) 31 IS 10201(Part 1):1988 Quality Systems (Part 1): Vocabulary (Superseded by IS 13999:1994 which has been redesignated as IS/ISO 8402:1994)
32 IS 10201(Part 2):1988 Quality Systems (Part 2): Guidelines for selection and use of standards on Quality Systems (Superseded by IS 14000:1988 which has been redesignated as IS/ISO 9000:1987)
33 IS 10201(Part 3):1989 Quality Systems (Part 3): Guidelines on elements of quality management system (Superseded by IS 14004:1991 which has been redesignated as IS/ISO 9004:1987)
34 IS 10201(Part 4):1989 Quality Systems (Part 4): Model for quality assurance in design/development, production, installation and servicing (Superseded by IS 14001:1994 which has been redesignated as IS/ISO 9001:1994)
35 IS 10201(Part 5):1988 Quality Systems (Part 5): Model for quality assurance in production and isntallation (Superseded by IS 14002:1994 which has been redesignated as IS/ISO 9002:1994)
36 IS 10201(Part 6):1988 Quality Systems (Part 6): Model for quality assurance in final inspection and test (Superseded by IS 14003:1994 which has been redesignated as IS/ISO 9003:1994)
37 IS 12801:1989 Pareto diagram and cause and effect diagram 38 IS 12879(Part 5):2000 Microfilming of technical drawings and other drawing office documents: Part /ISO3272-5 5 Test procedures for diazo duplicating of microfilm images in aperture cards
39 IS 13536:1993 Documentation - Directories of libraries, archives, information and documentationcentres and their databases
40 IS 13550(Part 1):1993 Documentation and Information - Vocabulary: Part 1 Basic concepts
41 IS 13550(Part 2):1993 Documentation and Information - Vocabulary: Part 2 Traditional documents
42 IS 13550(Part 3):1993 Documentation and Information - Vocabulary: Part 3 Iconic documents
29
Sl. No. IS Number/ DOC Number Title
43 IS 13550(Part 5):1994 Documentation and Information - Vocabulary: Part 5 Acquisition, identification and analysis of documents and data
44 IS 13550(Part 6):1994 Documentation and Information - Vocabulary: Part 6 Documentary languages
45 IS 13550(Part 11):1992 Documentation and Information - Vocabulary: Part 11 Audio-visual documents
46 IS 14805(Part 1):2000 Bank telecommunication - Funds transfer messages: Part 1 Vocabulary and universal set of data segments and data elements for electronic funds transfer messages
47 IS 14958(Part 1):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 1 Card life cycle
48 IS 14958(Part 2):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 2 Transaction process
49 IS 14958(Part 3):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 3 Cryptographic key relationships
50 IS 14958(Part 4):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 4 Security application module
51 IS 14958(Part 5):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 5 Use of algorithms
52 IS 14958(Part 6):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 6 Cardholder verification
53 IS 14958(Part 7):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 7 Key management
54 IS 14958(Part 8):2001 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards: Part 8 General principles and overview 55 56 IS 15255:2002 Banking and related financial services - Information interchange - Documentary credit form
57 IS 15256(Part 6):2002 Banking - Key management (retail) - Part 6: Key management schemes 58 IS 15400:2003 Complaints handling - Guidelines for organizations (withdrawn) (superseded by IS/ISO 10002:2004)
59 IS 15639:2006 Banking and related financial services – Information interchange - Collection Order form
60 SP 28 : 1994 Handbook on Statistical Quality Control (First Revision) 61 SP 52 : 1992 Handbook on Quality Management (Withdrawn)
62 SP 59 : 1993 Guidelines on matters of interest to consumers - Product information including instructions for use and packaging, standard methods of measuring performance
63 SP 60 : 1993 Guidelines for competence, acceptance and accreditation of laboratories, inspection bodies, certification bodies and systems of certification 64 SP 65 : 1998 Handbook on IS/ISO 9000 for small businesses 65 SP 67 : 2000 Guidelines for managing the economics of quality (Identical to ISO/TR 10014)
30
ANNEX-II
LIST OF STANDARDS WITH DUAL NUMBERWITH ISO STANDARD S Sl No. IS Number/
DOC Number Title Sectional
Committee of MSD
ISO/TC Number
1 IS 9000:2005 Quality management systems - Fundamentals and MSD 2 176 / ISO vocabulary (Third Revision)
2 IS 9001:2008 Quality management systems - Requirements (Third MSD 2 176 / ISO Revision) (along with Technical Corrigendum 1)
3 IS 9004:2009 Managing for the sustained success of an organization - MSD 2 176 / ISO A quality management approach (Sixth Revision)
4 IS 10001:2007 Quality management - Customer satisfaction – Guidelines MSD 2 176 / ISO for codes of conduct for organizations
5 IS 10002:2004 Quality Management - Customer Satisfaction – Guidelines MSD 2 176 / ISO for Complaints handling in organizations (Superseding IS 15400:2003)
6 IS 10003:2007 Quality management - Customer Satisfaction – Guidelines MSD 2 176 / ISO for dispute resolution external to organizations
7 IS 10005:2005 Quality management systems - Guidelines for quality plans MSD 2 176 / ISO (FirstRevision)
8 IS 10006:2003 Quality management systems - Guidelines for quality MSD 2 176 / ISO management in projects (First Revision)
9 IS 10007:2003 Quality management systems - Guidelines for MSD 2 176 / ISO configuration management (First Revision)
10 IS 10012:2003 Measurement management systems - Requirements for MSD 2 176 / ISO measurement processes and measuring equipment (First Revision)
11 IS 10013:2001 Guidelines for quality management system documentation MSD 2 176 / ISO/TR (First Revision)
12 IS 10014:2006 Quality management - Guidelines for realizing financial MSD 2 176 / ISO and economic benefits Superseding SP 57:2000)
13 IS 10015:1999 Quality management - Guidelines for training MSD 2 176 / ISO 14 IS 10019:2005 Guidelines for the selection of quality management MSD 2 176 / ISO system consultants and use of their services
15 IS 16949:2009 Quality management systems - Particular requirements MSD 2 176 / ISO/TS for the application of ISO 9001:2008 for automotive production and relevant service part organizations (Second Revision)
16 IS 19011:2011 Guidelines for auditing management systems MSD 2 176 / ISO (First Revision)
31
Sl No. IS Number/ DOC Number
Title Sectional Committee of MSD
ISO/TC Number
17 SP 68 : 200 Guidance on statistical techniques for ISO 9001:2000 MSD 2 176 / ISO/TR 10017 (First Revision)
18 IS 2500(Part 1):2000 Sampling procedures for inspection by attributes : Part 1 MSD 3 69 / ISO 2859-1:1999 Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Third Revision)
19 IS 2500(Part 3):1995 Sampling inspection procedures : Part 3 Sampling plans MSD 3 69 / ISO 2859-2:1985 indexed by limiting quality (LQ) for isolated lot inspection
20 IS 7920(Part 2):2012 Statistical vocabulary and symbols: Part 2 Applied MSD 3 69 / ISO 3534-2:2006 statistics (Third Revision)
21 IS 11843-1:1997 Capability of detection : Part 1 Terms & Definitions MSD 3 69 / ISO
22 IS 11843-2::2000 Capability of detection : Part: 2 Methodology in the linear MSD 3 69 / ISO calibration case
23 IS 11843-3:2003 Capability of detection : Part 3 Methodology for MSD 3 69 / ISO determination of the critical value for the response variable when no calibration data are used
24 IS 11843-4:2003 Capability of detection : Part 4 Methodology for MSD 3 69 / ISO comparing the minimum detectable value with a given value
25 IS 15202(Part 1):2002 Guidelines for implementation of statistical process MSD 3 69 / ISO 11462-1:2001 control (SPC): Part 1 Elements of SPC
26 IS 15202(Part 2):2012 Guidelines for implementation of statistical process MSD 3 69 / ISO 11462-2:2010 control (SPC) : Part 2 Catalogue of tools and techniques 27 IS 15393 (Part 1):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-1:1994 methods and results Part 1: General principles and Definitions 28 IS 15393 (Part 2):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-2:1994 methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method 29 IS 15393 (Part 3):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-3:1994 methods and results Part 3: Intermediate measures of the precision of a standard measurement method 30 IS 15393 (Part 4):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-4:1994 methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method 31 IS 15393 (Part 5):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-5:1994 methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method 32 IS 15393 (Part 6):2003 Accuracy (trueness and precision) of measurement MSD 3 69 /ISO 5725-6:1994 methods and results Part 6: Use in practice of accuracy values
32
Sl No. IS Number/ DOC Number
Title Sectional Committee of MSD
ISO/TC Number
33 IS 15436(Part 1):2004 Statistical aspects of sampling from bulk materials: Part 1 MSD 3 69 / ISO 11648-1:2003 General principles
34 IS 31000:2009 Risk Management - Principles and Guidelines MSD 4 262 / ISO
35 IS 18:1999 Information and documentation - Rules for the MSD 5 46 / ISO 4:1997 abbreviation of title words and titles of publications (Third Revision)
36 IS 2381(Part 1):2009 Information and Documentation - Bibliographic MSD 5 46 / ISO 690:1987 references: Part 1 Content, form and structure (Second Revision) 37 IS 2381(Part 2):2009 Information and Documentation - Bibliographic references MSD 5 46 / ISO 690-2:1997 : Part 2 Electronic documents or parts thereof (Second Revision) 38 IS 7900:2007 Data elements and interchange formats - Information MSD 5 154 / ISO 8601:2004 interchange - Representation of dates and times (Third Revision)
39 IS 8310:2006 Information and documentation - International standard MSD 5 46 / ISO 2108:2005 book number (ISBN) (Second Revision) 40 IS 10101:2012 Information and Documentation - International Standard MSD 5 46 / ISO 3297:2007 Serial Number (ISSN) (Second Revision)
41 IS 12879 (Part 1):2012 Microfilming of technical drawings and other drawing MSD 5 171 / ISO 3272-1:2003 office documents: Part 1 Operating procedures (First Revision)
42 IS 12879(Part 2):1999 Microfilming of technical drawings and other drawing MSD 5 171 / ISO 3272-2:1994 office documents: Part 2 Quality criteria and control of 35 mm silver gelatin microfilms (First Revision)
43 IS 12879(Part 3):2004 Microfilming of technical drawings and other drawing MSD 5 171 / ISO 3272- 3:2001 office documents: Part 3 Aperture card for 35 mm microfilm (First Revision)
44 IS 12879(Part 4):1999 Microfilming of technical drawings and other drawing MSD 5 171 / ISO 3272-4:1994 office documents: Part 4 Microfilming of drawings of special and exceptional elongated sizes
45 IS 13550:2003 Information and documentation - Vocabulary (First MSD 5 46 / ISO 5127:2001 Revision)
46 IS 14720:1999 Documentation - Guidelines for the establishment and MSD 5 46 / ISO 2788:1986 development of monolingual thesauri
47 IS 14836(Part 1):2009 Codes for the representation of names of countries and MSD 5 46 / ISO 3166-1:2006 their subdivisions: Part 1 Country codes (First Revision)
48 IS 14873:2012 Information and documentation -- Format for information MSD 5 46 / ISO 2709:2008 exchange (First Revision)
49 IS 15027(Part 1):2001 Micrographics - Vocabulary: Part 1 General terms MSD 5 171 / ISO 6196-1:1993
33
Sl No. IS Number/ DOC Number
Title Sectional Committee of MSD
ISO/TC Number
50 IS 15027(Part 2):2001 Micrographics - Vocabulary: Part 2 Image positions and MSD 5 171 / ISO 6196-2:1993 methods of recording
51 IS 15027(Part 3):2003 Micrographics - Vocabulary: Part 3 Film Processing MSD 5 171 / ISO 6196-3:1997
52 IS 15027(Part 4):2003 Micrographics - Vocabulary: Part 4 Materials and MSD 5 171 / ISO 6196-4:1998 packaging
53 IS 15027(Part 5):2001 Micrographics - Vocabulary: Part 5 Quality of images, MSD 5 171 / ISO 6196-5:1987 legibility, inspection
54 IS 15027(Part 6):2001 Micrographics - Vocabulary: Part 6 Equipment MSD 5 171 / ISO 6196-6:1992 55 IS 15027(Part 7):2001 Micrographics - Vocabulary: Part 7 Computer MSD 5 171 / ISO 6196-7:1992 micrographics
56 IS 15027(Part 8):2001 Micrographics - Vocabulary: Part 8 Use MSD 5 171 / ISO 6196-8:1998 57 IS 15027(Part 10):2001 Micrographics - Vocabulary: Part 10 Index MSD 5 171 / ISO 6196-10:1999 58 IS 15281:2003 Information and documentation - International Standard MSD 5 46 / ISO 10444:1994 Technical Report Number (ISRN) 59 IS 15389:2003 GEDI - Generic Electronic Document Interchange MSD 5 46 / ISO 17933:2000 60 IS 15390:2003 Information and documentation - Information retrieval MSD 5 46 / ISO 23950:1998 (Z39.50) - Application service definition and protocol specification
61 IS 15963 (Part 1):2012 Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-1:2004 of half-tone colour separations, proof and production prints -- Part 1: Parameters and measurement methods 62 IS 15963 (Part 2):2012Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-2:2004 of half-tone colour separations, proof and production prints -- Part 2: Offset lithographic processes 63 IS 15963(Part 3):2012) Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-3:2005 of half-tone colour separations, proofs and production prints -- Part 3: Coldset offset lithography on newsprint 64 IS 15963 (Part 4):2012 Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-4:2005 of half-tone colour separations, proofs and production prints -- Part 4: Publication gravure printing
65 IS 15963 (Part 5):2012 Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-5:2001 of half-tone colour separations, proof and production prints -- Part 5: Screen printing
66 IS 15963 (Part 6):2012 Graphic technology -- Process control for the production MSD 5 130 / ISO 12647-6:2006 of half-tone colour separations, proofs and production prints -- Part 6: Flexographic printing
67 IS 15991:2012 Information and documentation -- Bibliographic data MSD 5 46 / ISO 8459:2009 element directory for use in data exchange and enquiry
68 IS 15992:2012 Information and documentation -- The Dublin Core MSD 5 46 / ISO 15836:2009 metadata element set
34
Sl No. IS Number/ DOC Number
Title Sectional Committee of MSD
ISO/TC Number
69 IS 15993:2012 Information and documentation -- Schema for holdings MSD 5 46 / ISO 20775:2009 information
70 IS 15994(Part 1):2012 Information and documentation -- Records management MSD 5 46 / ISO 23081-1:2006 processes -- Metadata for records -- Part 1: Principles
71 IS 15994(Part 2):2012 Information and documentation -- Records management MSD 5 46 / ISO 23081-2:2009 processes -- Metadata for records -- Part 2: Conceptual and implementation issues
72 IS 15995:2012 Information and documentation –MarcXchange MSD 5 46 / ISO 25577:2008 73 IS 15996:2012 Information and documentation -- Library performance MSD 5 46 / ISO 11620:2008 indicators
74 IS 11179:2005 Information processing - Magnetic ink character MSD 7 68 / ISO 1004:1995 recognition - Print specification (First Revision)
75 IS 13616-1:2007 Financial services - International Bank Account Number MSD 7 68 / ISO (IBAN) -- Part 1: Structure of the IBAN
76 IS 13616-2:2007 Financial services - International Bank Account Number MSD 7 68 / ISO (IBAN) -- Part 2: Role and responsibilities of the Registration Authority
77 IS 14943(Part 2):2001 Financial transaction card originated messages - MSD 7 68 / ISO 8583- 2:1998 Interchange message specifications: Part 2 Application and Registration procedures for Institution Identification Codes (IIC)
78 IS 14943(Part 3):2007 Financial transaction card originated messages - MSD 7 68 / ISO 8583-3:2003 Interchange message specifications: Part 3 Maintenance procedures for codes (First Revision)
79 * IS 15042(Part 1):2006 Banking - Personal Identification Number (PIN) MSD 7 68 / ISO 9564-1:2002 management and security - Part 1: Basic principles and requirements for online PIN handling in ATM and POS systems (First Revision)
80 IS 15042(Part 2):2007 Banking - Personal Identification Number management and MSD 7 68 / ISO 9564-2:2005 security: Part 2 Approved algorithm(s) for PIN encipherment (First Revision)
81 IS 15042(Part 3):2011 Banking - Personal Identification Number (PIN) management MSD 7 68 / ISO 9564-3:2003 and security - Part 3: Requirements for offline PIN handling in ATM and POS systems
82 IS 15042(Part 4):2011Banking – Personal Identification Number management MSD 7 68 / ISO/TR 9564-4:2005 and security – Part 4: Guidelines for PIN handling in open Networks
83 IS 15043(Part 1):2001 Financial transaction cards - Messages between the MSD 7 68 / ISO 9992-1:1990 integrated circuit card and the card accepting device: Part 1 Concepts and structures 84 IS 15254:2002 Securities - Numbering of certificates MSD 7 68 / ISO 9019:1995
85IS 15256(Part 1):2011 Banking - Key management (Retail) - Part 1: Principles MSD 7 68 / ISO 11568-1:2005 (First Revision)
35
Sl No. IS Number/ DOC Number
Title Sectional Committee of MSD
ISO/TC Number
86 IS 15256(Part 2):2011 Banking - Key management (retail) - Part 2: MSD 7 68 / ISO 11568-2:2005 symmetric ciphers, their key management and life cycle
87 IS 15256(Part 4):2002 Banking - Key management (retail) - Part 4: Key MSD 7 68 / ISO 11568-4:1998 management techniques using public key cryptography
88 * IS 15413:2003 Codes for the representation of currencies and funds MSD 7 68 / ISO 4217:2001
89 IS 15415:2003 Securities and related financial instruments – International MSD 7 68 / ISO 6166:2001 securities identification numbering system (ISIN)
90 IS 15586:2005 Securities and related financial instruments – MSD 7 68 / ISO 10962:2001 Classification of Financial Instruments (CFI code)
91 IS 15587(Part 1):2005 Securities - Scheme for messages (Data Field Dictionary MSD 7 68 / ISO 15022-1:1999) Part 1: Data field and message design rules and guidelines
92 IS 15587(Part 2):2005 Securities - Scheme for messages (Data Field Dictionary MSD 7 68 / ISO 15022-2:1999 ) Part 2: Maintenance of the Data Field Dictionary and Catalogue of Messages
93 IS 15899:2011 Banking – Requirements for message authentication MSD 7 68 / ISO 16609:2004
94 IS 16005 (Part 1):2013 Banking -- Secure cryptographic devices (retail) -- Part MSD 7 68 / ISO 13491-1:2007 1: Concepts, requirements and evaluation methods
95 IS 16005 (Part 2):2013 Banking Secure cryptographic devices (retail) – Part 2: MSD 7 68 / ISO 13491-2:2005 Security compliance checklists for devices used in magnetic stripe card systems
96 IS 16006 : 2013Securities and related financial instruments - Codes for MSD 7 68 /ISO 10383 :2003 exchanges and Market Identification (MIC)
97 IS 16007 : 2013 Financial services -- Key management related data MSD 7 68 / ISO 13492:2007 element -- Application and usage of ISO 8583 data elements 53 and 96
98 IS 20022-1:2004 Financial services -- UNIversal Financial Industry MSD 7 68 /ISO message scheme -- Part 1: Overall methodology and format specifications for inputs to and outputs from the ISO 20022 Repository
99 IS 20022-3:2004 Financial services -- UNIversal Financial Industry MSD 7 68 / ISO/TS message scheme -- Part 3: ISO 20022 Modelling guidelines
100 IS 20022-4:2004 Financial services -- UNIversal Financial Industry MSD 7 68 / ISO/TS message scheme -- Part 4: ISO 20022 XML design rules
101 IS 20022-5:2004 Financial services -- UNIversal Financial Industry MSD 7 68 / ISO/TS message scheme -- Part 5: ISO 20022 Reverse engineering
102 IS 21188:2006 Public Key Infrastructure for financial services - MSD 7 68 /ISO Practices and policy framework
103 SP 69:2012 Financial Services – Information Security Guidelines MSD 7 68 / ISO/TR 13569:2005 (First Revision)
104 IS 16123 (Part 1):2013 Quantitative methods in process improvement – MSD 3 69 / ISO 13053-1:2011 Six sigma – Part 1: The DMAIC methodology 105 IS 16123 (Part 2):2013 Quantitative methods in process improvement – MSD 3 69
/ ISO 13053-2:2011 Six sigma -Part 2 Tools and techniques
36
ANNEX-III LIST OF STANDARDS UNDER BIS CERTIFCATION SCHEMES
MANAGEMENT SYSTEM CERTIFICATION Sl. No. IS Number/ DOC Number Title No. of Licences
1. IS/ISO 9001:2008 Quality management systems – Requirements 950 (Third Revision)
2. IS 15700:2005 Quality management systems – Requirements for 23
service quality by Public service organizations
38
ANNEX V LIST OF BILINGUAL STANDARDS
Sl. No. IS Number/ DOC Number Title
1. IS/ISO 9001:2008 Quality management systems – Requirements (Third Revision)
39
ANNEX VI MEMBERSHIP STATUS IN ISO / IEC COMMITTEES AND SUB C OMMITTEES
National ISO/TC SC Title Membership Mirror Status Committee MSD 2 ISO/TC 176 Quality management and quality assur ance P SC 1 Concepts and terminology P SC 2 Quality systems P SC 3 Supporting technologies P
MSD 2 ISO/PC 259 Outsourcing P MSD 3 ISO/TC 69 Application of statistical methods P SC 1 Terminology and symbols P SC 4 Applications of statistical methods in process manage P SC 5 Acceptance sampling P SC 6 Measurement methods and results P SC 7 Applications of statistical and related techniques for the P implementation of Six Sigma SC 8 Application of statistical and related methodology for new P technology and product development MSD 4 ISO/TC 258 Project, Programme and Portfolio Mana gement P ISO/TC 289 Brand Evaluation O MSD 4 ISO/PC 262 Risk Management P MSD 4 ISO/PC 277 Sustainable Purchasing P MSD 5 ISO/TC46 Information and documentation O SC 4 Technical interoperability O SC 8 Quality - Statistics and performance evaluation O SC 9 Identification and description O SC 11 Archives/records management - MSD 5 ISO/TC 154 Processes, data elements and d ocumentation in commerce O industry and administration MSD 5 ISO/TC 171 Document management applicatio ns O SC 1 Quality - SC 2 Application issues - SC 3 General issues - MSD 6 ISO/TC 130 Graphic technology O MSD 7 ISO/TC 68 Financial Services P SC 2 Financial Services-Security P SC 4 Securities and Related Financial Instruments P Sc 7 Financial Services – Core Banking P MSD 7 ISO/TC 222 Personal financial planning O MSD 9 ISO/PC 288 Educational organizations management systems – P Requirements with guidance for use MSD 10 ISO/TC 247 Fraud countermeasures and cont rols P MSD 12 ISO/TC 267 Facilities Management P MSD 12 ISO/PC 251 Asset Management P MSD 12 ISO/TC 260 Human Resource Management P MSD 13 ISO/TC 228 Tourism and related management P
P-Participating Member; O-Observer Member
41
ANNEX VIII LIST OF STANDARDS TRANSFERRED TO OTHER DEPARTMENTS
Sl. No. IS Number/ DOC Number Title Transferred to 1 IS 51:1990 Guidelines for the inclusion of safety aspects in standardsLMD in 1997 /ISO/IEC Guide (now PGD) 2 IS 786:1967 Conversion factors and conversion tables (First Revision) LMD in 1997 3 IS 786 (Sec S1):1967 Supplement to Indian Standard – Conversion factors and LMD in 1997 Conversion tables (First Revision) 4 IS 787:1956 Guide for inter-conversion of values from one system of LMD in 1997 units to another 5 IS 1076(PT 1):1985 Preferred Numbers: Part 1 Series of preferred numbersLMD in 1997 /ISO 3:1973 (Second Revision) 6 IS 1076(PT 2):1985 Preferred numbers : Part 2 Guide to the use of preferred LMD in 1997 /ISO 17:1973 numbers and series of preferred numbers (Second Revision) 7 IS 1076(PT 3):1985 Preferred numbers : Part 3 Guide to the choice of series of LMD in 1997 /ISO 497:1973 preferred numbers and of series containing more rounded values of preferred numbers (Second Revision) 8 IS 1105:1957 Method for precise conversion of inch and metric LMD in 1997 dimensions to ensure interchangeability 9 IS 1890(PT 0): 1995 Quantities and Units : Parts 0 General principles LMD in 1997 /ISO 31-0:1992 (First Revision) 10 IS 1890(PT 1): 1995 Quantities and Units : Part 1 Space and time (ThirdLMD in 1997 /ISO 31:1:1992 Revision) 10 IS 1890(PT 2): 1995 Quantities and Units : Part 2 Periodic and related LMD in 1997
/ISO 31-2:1992 phenomena (Second Revision) 11 IS 1809(PT 3):1995 Quantities and Units : Part 3 Mechanics (Second Revision) LMD in 1997
/ISO 31-3:1992 12 IS 1890(PT 4):1982 Quantities ,Units and Symbols : Part 4 Heat (First Revision)LMD in 1997
/ISO 31-4:1978 13 IS 1890 (PT 5) :1995 Quantities and Units : Part 5 Electricity and magnetism LMD in 1997
/ ISO 31-5:1992 (First Revision) 14 IS 1890 (PT 6):1983 Quantities, Units and Symbols : Part 6 Light and related LMD in 1997
/ ISO 31/6:1980 electromagnetic radiations 15 IS 1890 (PT 7):1995 Quantities, Units and symbols : Part 7 AcousticsLMD in 1997
/ ISO 31-8:1992 (First Revision) 16 IS 1890 (PT 8):1995 Quantities and Units :Part 8 Physical chemistry andLMD in 1997
/ ISO 31-8:1992 molecular physics (First Revision) 17 IS 1890 (PT 9):1995 Quantities and Units : Part 9 Atomic and nuclear physicsLMD in 1997
/ ISO 31-9:1992 (First Revision) 18 IS 1890 (PT 10):1995 Quantities and Units : Part 10 Nuclear reactions andLMD in 1997
/ ISO 31-10:1992 ionizing radiations (First Revision) 19 IS 1890 (PT 11):1995 Quantities and units : Part 11 Mathematical signs andLMD in 1997
/ ISO 31-11:1992 symbols for use in the physical sciences and technology (Second Revision)
20 IS 1890 (PT 12):1995 Quantities ,Units and symbols : Part 12 CharacteristicLMD in 1997 / ISO 31-12:1992 numbers (First Revision)
42
Sl. No. IS Number/ DOC Number Title Transferred to 21 IS 1890 (PT 13):1983 Quantities , Units and Symbols : Part 13 Solid stateLMD in 1997
/ ISO 31/13:1981 physics (Second Revision) 22 IS 10005:1994 / SI units and recommendations for the use of their LMD in 1997
ISO 1000:1992 multiples and of certain other units (Second Revision) 24 SP : 8 : 1970 ISI Handbook of mathematical, physical, chemical and LMD in 1997 engineering tables 25 IS 13808(Part 1):1993 Quality management for hospital services MHD in 2005 (Upto 30-bedded hospitals)-Guidelines : Part 1 Out-Patient Department (OPD) and Emergency Services 26 IS 13808(Part 2):1993 Quality management for hospital services (UptoMHD in 2005 30-bedded hospitals)- Guidelines : Part 2 Diagnostic and blood transfusion services 27 IS 13808(Part 3):1995 Quantity management for hospital services (upto MHD in 2005 30-bedded hospitals)-Guidelines: Part 3 Wards, Nursing services and operation theatre 28 IS 13808(Part 4):1996 Quality management for hospital services (for 30-bedded MHD in 2005 hospital)- Guidelines: Part 4 Hospital support services 29 IS 13808(Part 5):1996 Quality management for hospital services (for 30 bedded MHD in 2005 hospital) – Guidelines : Part 5 Hospital equipment management 30 IS 15195:2002 Performance Guidelines for Quality assurance in hospital MHD in 2005 servicesupto 30-bedded hospitals 31 IS 15461:2004 Performance Guidelines for Quality assurance in hospital MHD in 2005 servicesupto 100-bedded hospitals 32 IS 15551:2003 Quality Management systems – Guidelines for process MHD in 2005 improvement in health service organization 33 IS 15414:2003‘ Bank Cards – Magnetic stripe data content for track 3 LITD
/ISO 4909:2003
43
ANNEX IX
LIST OF SPECIAL PUBLICATIONS
Sl. No. IS Number Title
1 * SP 63 : 2007 Explanatory guide on IS/ISO 9001:2000 (First Revision)
2 SP 68 : 2005 Guidance on statistical techniques for ISO 9001:2000 / ISO/TR 10017 (First Revision)
3 SP 69:2012 Financial Services – Information Security Guidelines / ISO/TR 13569:2005 (First Revision)