programmable ac&dc sources · 2019-08-07 · pause-resume, continuous or pulse measurements...
TRANSCRIPT
• Single Phase Output / Three Phase Output• Output Power: 1000VA-300kVA• Output Voltage: up to 850Vrms AC / 1000V DC (1 or 2 ranges)• Output Frequency: DC, 10-1000Hz• Bandwidth >2500Hz• Overload Capacity up to 120%• Ramp, Drop-out, Loop Modes, Arbitrary Waveforms• Low Output Distortion• Isolated output• RS232/RS485 Interface Standard, USB/LAN/Fiber Optic Optional• Access to PID regulation parameters• Windows® Software GTS-Manager• Customized Units• Regenerative mode (option)
Programmable AC&DC SourcesGTS Series
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
GTS 60kVA
DescriptionThe GTS Series is a family of programmable AC and DC Sources with single phase output.The available power range starts from 1000VA up to 300kVA. Standard models with output voltage up to 850Vrms AC / 1000V DC pro-vide a clean and isolated 1-phase output voltage, over a frequency range between DC and 10 to 1000Hz*. Up to 2 voltage ranges with automatic selection can be realized per unit. The AC output waveform is a well regulated sinewave with low harmonic distortion (typically less than 0.2% between 50-60Hz), arbi-trary waveform generation is ensured via the professional Windows® application software GTS Manager or using the built in analog inputs (Booster Inputs).Standard low power units are built into 19” racks or table cases, high power units are built into 19” cabinets on wheels.Remote control is ensured via the standard built in isolated RS232 and RS485, or optional USB, LAN and Fiber Optic Interfaces.In addition, 8 digital Inputs/Outputs (Start, Stop, Enable, Test started, Failure, etc.) allow finally the GTS Series to be perfectly integrat-ed into manufacturing lines.
GTS Series programmable AC and DC Sources are very robust, cost affordable and easy to use equipments developed especially for intensive use in production and testing lines, as well as in research and development labs, or for burn-in applications.Equipped with a modern and easy to use front panel interface with large LDC display, the controllers of the GTS Series offer advanced control and measurement capabilities for AC and DC applications. The GTS Series is equipped with a sequencer and timer, allowing to set output voltage, frequency and test time. The Start-Phase angle setting is possible and free programmable from 0 to 360°.Various modes like ramp, drop out and loop are available in order to create test programs and sequences following norms or custom manufacturer test procedures. One additional parameter is the possibility to choose the positive or negative polarity of the DC output. The following information will be measured and displayed during the test:- Output voltage- Load current- Test time- Active and reactive power consumption (Watt, VA, VAr, PF)- Complex load impedance- Temperature of DUT (option)Optionally, the GTS Series can be extended to 3-phase systems by putting 3 single phase units in master/slave combination. AC and DC Voltage generators of the GTS Series can also be combined with current generators of the GIS Series in order to create synchronous voltage/current generators, allowing for example the test of Watthour Meters.
GTS 5kVA
Application* GV Series (AC only) from 40 to 200Hz
Output Specifications
Output power 1000VA up to 300kVA
Output power overload 120%
Output voltage AC up to 850Vrms
Output voltage DC up to 1200V
Output current AC continuous depending on power
Output current AC overload depending on power
Output current DC continuous 0.707 of AC value
Output current DC overload 0.707 of AC value
Peak output current 1.41 * AC overload
Voltage resolution 0.05% fs
Max time at overload 5s
Min setting voltage 0V
Accuracy 0.3% f.s.
Line accuracy 0.1% f.s.
Load accuracy 0.2% f.s.
Linearity 0.1% f.s.
DC offset 0.5% f.s.
Max output ripple at HF 0.3% f.s.
Output Frequency
Range DC and 10-1000Hz
Resolution 0.01Hz
Accuracy 0.15%
Bandwidth >2500Hz
Max THD at 50-60Hz 0.2%
Start-phase angle free programmable 0 to 360°
Timer
Range 1ms to infinite
Resolution 1ms
Max n. of steps 30
Modes Auto-Repeat, Loop, Ramp, Pause-Resume, continuous or pulse
Measurements
Voltage Measurement
Range +10% FS
Resolution 0.2%
Accuracy 0.3%
Current Measurement
Range +10% FS
Resolution 0.1%
Accuracy 0.5%
Impedance Measurement
Range depending on power and voltage
Resolution 1%
Input Specifications
Line voltage 230V 1F ± 10% or 400V 3F ± 10%
Line frequency 45-65Hz
Cosphi 0.85
Line protection automatic MCB
Line connection External or internal (depending on power)
Other
Dimensions depending on model, 19” rack or cabinet
Weight depending on model
Output connection Front or rear
Operating temperature 5-35°C
Storage temperature -5-60°C
Protection rating std. IP20B, others on request
Cooling Forced air
Acoustic noise at 1m typ. 65dBA
Safety and EMC CE (EMC e LVDT)
Permissible operating altitude
max. 1000m
Protection
Overload, overtemperature, short circuit, mains under & over voltage
Isolation
line / output-gnd 2500Vrms
output / gnd 1500Vrms
Max operation voltage each output to gnd
depending on output voltage
Programmable AC&DC SourcesGTS Series
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
Specifications
GTS 5kVA
Interface
Communication isolated RS232/RS485 std.;USB, LAN, Fiber Optic opt.
Digital Inputs 4x no contact no voltage isolated program-mable inputs. Available functions: Start,
Stop, Start/Stop, Enable, Status (1 to 4), Test End, Pause, Resume, etc.
Digital Outputs 4x 24V isolated programmable outputs. Available functions: Ready, Test started, Ab-normal status, Failure, Test completed, etc.
Booster inputs for ex-ternal analog control
0 to ±10V (use as power amplifier)
External connections Sync (Trig In / Trig Out)
Available Standard Models (Extract)
Name Description
/M-GTS-SW
Management Software including Arbitrary for single unit
/M3-GTS-SW
Managment Software including Arbitrary for 3phase system
/PID PID software
/Rack 19” Rack instead of cabinet (available up to 5kVA)
/3-Rack 19” Rack with connections for 3 phase systems
/Wheels Cabinet with wheels max weight 800kg
/USB USB interface
/LAN LAN interface
/FO Fiber Optic interface
/ROUT Rear output connections
/FOUT Front output connections
/SOUT Special output connections
/TCase Tablet case
/MRange Manual Switching of current range
/ARange Automatic Switching of current range
/IP Special IP protection
/ATE Without Front panel control and display, for system integration
/DC-CTRL DC control mode of output (0-10V)
Programmable AC&DC SourcesGTS Series
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
Output Power
300V-Models 500V-Models
Name
AC-Output (Vmax / Imax) DC-Output (Vmax / Imax)
Name
AC-Output (Vmax / Imax) DC-Output (Vmax / Imax)
Range 1 Range 2 Range 1 Range 2 Range 1 Range 2 Range 1 Range 2600VA GTS300-600VA 150V / 4A 300V / 2A 212V / 2.8A 423V / 1.4A GTS500-600VA 250V / 2.4A 500V / 1.2A 353V / 1.7A 705V / 0.85A1000VA GTS300-1000VA 150V / 6.7A 300V / 3.3A 212V / 4.8A 423V / 2.3A GTS500-1000VA 250V / 4A 500V / 2A 353V / 2.8A 705V / 1.4A2500VA GTS300-2500VA 150V / 17A 300V / 8.3A 212V / 12A 423V / 5.9A GTS500-2500VA 250V / 10A 500V / 5A 353V / 7.1A 705V / 3.5A5kVA GTS300-5kVA 150V / 33A 300V / 17A 212V / 23A 423V / 12A GTS500-5kVA 250V / 20A 500V / 10A 353V / 14A 705V / 7.1A10kVA GTS300-10kVA 150V / 67A 300V / 33A 212V / 48A 423V / 23A GTS500-10kVA 250V / 40A 500V / 20A 353V / 28A 705V / 14A15kVA GTS300-15kVA 150V / 100A 300V / 50A 212V / 71A 423V / 35A GTS500-15kVA 250V / 60A 500V / 30A 353V / 43A 705V / 21A20kVA GTS300-20kVA 150V / 133A 300V / 67A 212V / 94A 423V / 48A GTS500-20kVA 250V / 80A 500V / 40A 353V / 57A 705V / 28A30kVA GTS300-30kVA 150V / 200A 300V / 100A 212V / 142A 423V / 71A GTS500-30kVA 250V / 120A 500V / 60A 353V / 85A 705V / 43A60kVA GTS300-60kVA 150V / 400A 300V / 200A 212V / 284A 423V / 142A GTS500-60kVA 250V / 240A 500V / 120A 353V / 170A 705V / 85A80kVA GTS300-80kVA 150V / 533A 300V / 267A 212V / 378A 423V / 189A GTS500-80kVA 250V / 320A 500V / 160A 353V / 227A 705V / 113A100kVA GTS300-100kVA 150V / 667A 300V / 333A 212V / 473A 423V / 236A GTS500-100kVA 250V / 400A 500V / 200A 353V / 284A 705V / 142A
Options GTS-Software
The optional GTS-Software allows to remote the GTS Series through various available interfaces.
• GTS AC&DC source• English manuals• Compliance and calibration certificate• CE conformity document
Standard Delivered Items
Other standard models available from 30V up to 1000V, please send us your request.
Other Products
Model / Order Example
CT
I
Caltest Instruments GmbHKohlmattstrasse 7
D-77876 [email protected]
Tel: +49(0)7842-99722-00Fax: +49(0)7842-99722-29www.caltest.de
Programmable AC&DC SourcesGTS Series
© 2014 Zenone Elettronica. V2-Sep16. Subject to change without notice.
Founded in 1990 in Mirabella, Italy, by engineers with many years of experience in the power electronic industry, Zenone Elettronica has quickly become a leader in the design and manufacturing of complex power electronic systems with a high level of technology.With the focus in converting static energy of medium and high power, the current product program includes:- Static AC and DC current generators up to 50 kA- Single and three-phase frequency converters up to 1 MVA- Single and three phase programmable AC sources up to 1MVA- High Power DC Power Supplies up to 1200V and 1MW- High Power Bidirectional DC Power Supplies- AC loads up to 500kVA
Frequency and Voltage Converters: FVC Series• 1- and 3-phase frequency and voltage converters• Power from 5kVA up to 1,000kVA• Output frequency from 40 to 200Hz, optional 200-450Hz / 15-80Hz• Robust design with overload capability up to 200%
DC Power Sources for medium and high power applications: AL3000 Series• Output voltage: 5VDC to 1000VDC• Output power: 2kW to 1000kW• Output current: 10A to 10000A• Operation in CV/CC/CP mode• Fully bidirectional versions
FVC frequency converter
DC-Source AL3000
About Zenone Elettronica
GTS300V-10KVA-1
Series
Output voltage(up to 1000Vrms)
Max output power(600VA up to 150kVA)
Number of voltage ranges(1 or 2 ranges)
Current Generators, 1Φ and 3Φ• GI Series: AC current generators up to 50kA / 1000kVA / 40-200Hz• GIS Series: AC and DC current generators up to 5kA / 80kVA /
DC...10-800Hz• Typical Applications: - Thermical and magnetical tests of switches, breakers, relays, fuses with trip-time measurements - Heating tests of electrical contacts - Tests of coils and transformers - Tests and calibration of measurement instruments
GI AC-Current Generator
GIS AC&DC-Current Generator