program konference icmd 2019 a5 final · chairman (b3): doc. ing. slavomír hrček, ph.d....

September 10th–13th 2019

60th International Conferenceof Machine Design Departments

Conference Program

September 10th–13th, 201960th INTERNATIONAL CONFERENCE OF MACHINE DESIGN DEPARTMENT

1

Tuesday September 10

Wednesday September 11

16:00 Accommodation (check-in)16:00–18:00 Registration (Hotel restaurant)18:00–20:00 Dinner (Hotel restaurant)

07:00–09:00 Breakfast08:00–09:30 Registration (Congress centre Vinice Hnanice)09:30–10:00 Coffee Break

Conference room A

10:00–10:20 Opening of the conference Prof. Ing. Martin Hartl, Ph.D.;

Doc. Ing. Jaroslav Katolický, Ph.D.

Chairman (A1): Prof. Ing. Martin Hartl, Ph.D.

10:20–10:50 O1 Stefan Ritt Next generation agile on demand production. Why metal additive manufacturing and traditional metal works will join forces and do not substitute each other

10:50–11:20 O2 Petr Šperka Where are limits for friction improvements in machines?

11:20–11:40 Group photo


2

12:00–13:30 Lunch (Hotel restaurant)

Chairman (A2): Ing. Petr Šperka, Ph.D.

13:40–14:00 O3 Jozef Bronček; Martin Vicen; Peter Weis; Viera Konstantová; Norbert Radek Adhesion Properties Determination of Heat Treated Steel 100Cr6 with Applied DLC Coatings

14:00–14:20 O4 Pavel Čípek; David Rebenda; David Nečas; Martin Vrbka; Martin Hartl Observation of lubrication film in synovial joint

14:20–14:40 O5 Jiří Křupka; Petr Šperka; Ivan Křupka; Martin Hartl Lubrication of rolling–sliding polymer contacts

14:40–15:00 O6 David Rebenda; Pavel Čípek; Martin Vrbka; Ivan Křupka Effect of hyaluronic acid molecular weight on friction of articular cartilage

15:00–15:20 Coffee Break

Chairman (A3): Prof. Dr. Ing. Miloš Němček

15:20–15:40 O11 Michal Herda Measurement and evaluation of the test bench with an open flow of mechanical power for gearboxes testing

15:40–16:00 O12 Václav Mosler; Jan Pavlík; Jiří Havlík Methodology measurement of inclination gears in operation

16:00–16:20 O13 Jiří Začal; Zdeněk Folta; Lukáš Hruzík Influence of Shape of Pressure Vessel Shell on Bolts Working Load


3

16:20–16:40 O14 Maroš Majchrák; Róbert Kohár; M. Lukáč; Rudolf Skyba The process of creating a computational 3D model of a harmonic transmission

16:40–17:00 O15 Vojtěch Dynybyl The Assessment of Two Possibilities of Simulation of Operating Load used for the Experimental Research of Drive´s Parts

18:00–20:00 Dinner (Pivovar Vinice Hnanice)

Conference room B

Chairman (B1): Doc. Ing. David Paloušek, Ph.D.

13:40–14:00 O7 Lukáš Jančar; Jakub Měsíček; Zdeněk Folta; Petr Novák Design procedure of a topologically optimized scooter frame part

14:00–14:20 O8 Martin Janda; František Lopot, Daniel Hadraba, Jan Brajer, Ondřej Štoček, Martin Havlíček, Pavel Malý, Martin Dub Analysis of Linear Guide with Metric Leadscrew and 3D printed Slider for ATLAS ITk Strip Barrel Stave Insertion Tooling

14:20–14:40 O9 Eliška Cézová Stress redistribution in simple sandwich beams

14:40–15:00 O10 Amit Kumar Singh; Prashant Athanker Modelling, Simulation and Optimization of different ti6al4v micro-lattice Structures for Additive Manufacturing


4


Chairman (B2): Prof. Ing. Ladislav Ševčík, CSc.

15:20–15:40 O16 Milan Benko; Ľuboš Kučera Mechanics properties of groove squared profiles made of carbon composite material with cured epoxy in form and by vakuum

15:40–16:00 O17 Ivan Mašín General Morphological Analysis of Autonomous Utility Vehicles Design

16:00–16:20 O18 Michal Petrů; Rajesh Mishra; Xiaomeng Wang Testing of impact resistant properties of sandwich composites reinforced hybrid carbon–aramid fibres for using in frames of modular platform autonomous vehicle

16:20–16:40 O19 Patrik Sniehotta Influence of Material Structure on Service Life and Load Capacity of Bicycle Spokes

18:00–20:00 Dinner (Pivovar Vinice Hnanice)

Conference room C13:40–15:00 Presentation poster session

P1 Houssam Mahmoud; František Vlašic; Pavel Mazal Leakage Analysing for Pneumatic Circuit of Bus Door Using Acoustic Emission


5

P2 Slavomír Hrček; Róbert Kohár; Michal Lukáč; Ján Šteininger Algorithm to calculate slip velocities for spherical roller bearings

P3 Radka Jírová; Lubomír Pešík Effect of dynamic parameters on linear bearings

P4 Róbert Kohár; Tomáš Capák; Adrián Hajdučík; Rudolf Madaj Autonomous guided vehicle such as mobile carrier of technology

P5 Martin Krčma; Petr Krejčiřík; David Škaroupka; David Paloušek Use of plastic concrete for large scale 3D printing

P6 Aleš Lufinka Testing device for biaxial loading of textile specimens

P7 Martina Ryvolová; Josef Vosáhlo Development of a light composite part

P8 Radek Teplý Study of predictive design for mechatronic arm

P9 Arnošt Vespalec; Josef Novák; David Paloušek Effect of interlayer behaviour on load capacity of 3D printed cementitious composite

P10 Radek Vrána; Daniel Koutný; David Paloušek; Zikmund T. Shape and Dimensional Analysis of Lattice Structures Produced by Selective Laser Melting

15:20–18:00 Poster session


6

Thursday September 1207:00–09:00 Breakfast

Conference room A Chairman (A4): Doc. Ing. Martin Vrbka, Ph.D.

09:00–09:20 O21 Zdeněk Folta; Miroslav Trochta; Petr Matějka Washing machine resonance frequency and its effect on its operation

09:20–09:40 O22 Andrzej Harlecki; Adam Przemyk Application of finite element method and MSC Adams software in design process of truck trailers

09:40–10:00 O23 Rudolf Skyba; Slavomír Hrček; Lukáš Smetanka; Maroš Majchrák Contact analysis of large diameter bearings

10:00–10:20 O24 Pavel Srb; Michal Petrů. FEM simulation of composite car seat cushion

10:20–10:40 O25 Ladislav Ševčík Comparison of welded and bolted frames of freight electric vehicles from high strength steel


11:00–12:00 Directors meetings



7

Chairman (A5): Prof. Ing. Vojtěch Dynybyl, Ph.D.

13:30–13:50 O31 Miloš Němček Contribution to the determination of the coefficient KHβ-C according to the standard ISO 6336

13:50–14:10 O32 Jan Pavlík; Marek Sadílek; Miroslav Trochta The thickness of the marking compound used for creating real contact patterns on the gearing

14:10–14:30 O33 Jiří Struž; Filip Dušek Theoretical proposal of experiment which verifies cardan shaft influence on drivetrain vibration

14:30–14:50 O34 Miroslav Trochta; Jan Pavlík; Jiří Začal Transmission Error Measurement and Evaluation


15:30–19:00 Social programme

19:30–23:00 Gala dinner (Hotel restaurant) (BBQ, wine tasting, dulcimer music)

Conference room B Chairman (B3): Doc. Ing. Slavomír Hrček, Ph.D.

09:00–09:20 O26 Tomáš Gajdošík; Ľuboš Kučera; Igor Gajdáč The design of the unique equipment for verification and calibration of axle and crane scales

09:20–09:40 O27 Jan Kanaval; Eliška Cézová Experimental Evaluation of Untightening Torque of Bolted Joints Using Loctite Thread Lockers Depending on Surface Degreasing Quality


8

09:40–10:00 O28 Karel Petr Application of New Rules for Pattern Specification according Geometrical Product Specifications

10:00–10:20 O29 Václav Vaněk; Roman Polák Specific requirements for technical documentation in the automotive industry

10:20–10:40 O30 Daniel Varecha; Róbert Kohár; Peter Števko The design of the shaft with considering Goodman lifetime theory



Chairman (B4): Doc. Ing. Michal Petrů, Ph.D.

13:30–13:50 O35 Pavel Bartoníček; Ivan Mašín Customer car seat heating, E-mobility strategy

13:50–14:10 O36 Lukáš Hruzík; Jiří Začal; Květoslav Kaláb Applications of a clamping joint in a rail vehicle design

14:10–14:30 O37 Filip Jeniš; Ivan Mazůrek Mechatronically controlled bogie of high-speed train

14:30–14:50 O20 Oldřich Dajbych; Aleš Sedláček; David Herák Precision of modal analysis in ANSYS


15:30–19:00 Social programme

19:30–23:00 Gala dinner (Hotel restaurant) (BBQ, wine tasting, dulcimer music)


9

Conference room C09:40–15:10 Poster session

Friday September 1307:00–09:00 Breakfast

Conference room A Chairman (A 6): Doc. Ing. Petr Svoboda, Ph.D.

09:20–09:40 O39 Ján Galík; Róbert Kohár; Peter Števko Plastic waste shredder

09:40–10:00 O41 Jan Hoidekr Design of Machine for testing the Quality of Oilseed Hulling

10:00–10:20 O42 Ivana Mazínová How to teach Eco-Audit for design

10:20–10:40 O43 Tomáš Vach; Ivan Mašín Evolutionary analysis of vertical gardens design


13:00 Conference closing


10

Conference room C09:00–10:40 Poster session

13:00 Conference closing

ICMD 2019VINICE HNANICE

program konference icmd 2019 a5 final · chairman (b3): doc. ing. slavomír hrček, ph.d....

Documents