products catalog 2015
TRANSCRIPT
-
8/18/2019 Products Catalog 2015
1/46
Empowering Your Dreams...
-
8/18/2019 Products Catalog 2015
2/46
www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1 2
About Proveedor
Proveedor is an Electronics and Robotics components selling company. Our vision is to get engineering resources from all over the globe and provide those at one platform so that the creative youth of Pakistan can utilize those and develop better products. We deliver whatever you need for your projects; weather those are electronics parts,
mechanical parts, sensors, modules, arduino shields etc. etc. Even if we don’t have what you need just order it andwe’ll get it for you.
Besides, we also provide professional consultancy to students and professionals to help them out in their projects.We have a dedicated team of highly competent professional engineers for this purpose.
In addition to that, we are manufacturing creative products that are meant to enhance the life style. These creative gadgets are built for both individuals and companies to minimize human effort and maximize efficiency. And if you don’t find one appropriate for your needs we’ll be more than happy to design and build customized stuff for
you to cater your exact demands, whether it’s for you or your company.
The only policy we follow is honesty, trust and faith.
-
8/18/2019 Products Catalog 2015
3/46
3 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Table of Contents
3
19
12
14
33
9
40
Arduino
Raspberry Pi & Accessories
Development Boards & Programmers
Wireless
Sensors
Robotics
Miscelleneous Components
Arduino Boards
Arduino Shields
Arduino Kits
Rasbberry Pi Boards
Raspberry Pi Cameras
Raspberry Pi Expansion Boards
Raspberry Pi SD Cards
DC Step Up, Step Down and Regulator Modules
Miscelleneous Sensors, Modules and Kits
AVR, 8051, PIC Development BoardsAVR, 8051, PIC Programmers
AVR, 8051, PIC Debuggers
Universal IC / EEPROM Programmers
Xbee Modules
Bluetooth Modules
RF Modules
NFC / RFID Modules
Temperature, Humidity and Pressure Sensors
Accelerometers, Compass, Gyros
Gas, Smoke, Color and Light Detecon Sensors
Distance Measurement Sensors
Roboc Hands, Roboc Cars Kits
Omni Direconal and Mecanum WheelsDC Servo, Stepper and DC Gear Motors
Motor Drivers
-
8/18/2019 Products Catalog 2015
4/464 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0006
Arduino Mega 2560Rs. 2,450The Arduino Mega 2560 is a microcontroller
board based on the ATmega2560. It has 54
digital input/output pins (of which 15 can
be used as PWM outputs), 16 analog inputs,
4 UARTs (hardware serial ports), a 16 MHz
crystal oscillator, a USB connecon, a power
jack, an ICSP header, and a reset buon. Itcontains everything needed to support the
microcontroller; simply connect it to a com-
puter with a USB cable or power it with a
AC-to-DC adapter or baery to get started.
Arduino
SKU # EP-0008
Arduino LeonardoRs. 2,250The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digi-
tal input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a
16 MHz crystal oscillator, a micro USB connec
on, a power jack, an ICSP header, and a re-set buon. It contains everything needed to support the microcontroller; simply connect it
to a computer with a USB cable or power it with a AC-to-DC adapter or baery to get started.
SKU # EP-0005
Arduino UNO R3Rs. 1,550The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital in-
put/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ce-
ramic resonator, a USB connecon, a power jack, an ICSP header, and a reset buon. It
contains everything needed to support the microcontroller; simply connect it to a com-
puter with a USB cable or power it with a AC-to-DC adapter or baery to get started.
-
8/18/2019 Products Catalog 2015
5/465 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Arduino
SKU # EP-0009
Arduino NanoRs. 1,550
The Arduino Nano is a small, complete, and breadboard-friendly board based
on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has
more or less the same funconality of the Arduino Duemilanove, but in a diff er-
ent package. It lacks only a DC power jack, and works with a Mini-B USB cable in-
stead of a standard one. The Nano was designed and is being produced by Gravitech.
SKU # EP-0010
Arduino Pro MiniRs. 1,250The Arduino Pro Mini is a microcontroller
board based on the ATmega168. It has 14
digital input/output pins (of which 6 can
be used as PWM outputs), 8 analog inputs,
an on-board resonator, a reset buon, and
holes for mounng pin headers. A six pin
header can be connected to an FTDI cableor Sparkfun breakout board to provide USB
power and communicaon to the board.
SKU # EP-0007
Arduino DueRs. 3,450
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3
CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digi-
tal input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs
(hardware serial ports), a 84 MHz clock, an USB OTG capable connecon, 2 DAC (digital to
analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset buon and an erase buon.
-
8/18/2019 Products Catalog 2015
6/466www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Arduino
SKU # EP-0093
Arduino IO Expansion Shield v7.1Rs. 1,200IO Expansion shield is one of the market favourites. This Expansion shield introduced to the mar-
ket the famous color code for sensors and actuators input and output. The 3 pin format for Sig-
nal, Voltage and Ground is extremely useful, specially if used altogether with our increasingly
large range of modules, sensors and devices that just fit . Alternavely, the board includes very
common Xbee socket for mulpurpose wireless connecvity such as RF, wireless, bluetooth.
SKU # EP-0126
Arduino Ethernet ShieldRs. 1,550The Ethernet Shield allows an Arduino or
compable board to connect to the internet.
It is based on the Wiznet W5100 ethernet
chip providing a network (IP) stack capable
of both TCP and UDP. The Ethernet Shield
supports up to four simultaneous socket con-
necons. Use the Ethernet library to writesketches which connect to the internet using
the shield. The latest revision of the shield
adds a micro-SD card slot, which can be used
to store files for serving over the network. It is
compable with the Arduino UNO and Mega.
SKU # EP-0094
BeetleRs. 1,100The new generaon “Beetle” controller derives its core noon from minimalism without
compromising funconality. It comes with Atmel AtMega32u4 (datasheet) @16MHz clock
me and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 pwn pins.
To further make it user-friendly, it is compable with Micro USB so that direct program-
ming and tesng is no longer a headache. It can be programmed via Arduino Suite easily.
-
8/18/2019 Products Catalog 2015
7/467 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Arduino
SKU # EP-0013
Arduino Motor Shield L298Rs. 2,540
The Motor Shield (2A) uses L298P chip which allows to drive two 7-12V DC motors with maximum 2A
current, it can be directly mount onto standard Arduino Duemilanove, Uno and Arduino Mega. The
speed control is achieved through convenonal PWM which can be obtained from Arduino’s PWM
output Pin 5 and 6. The enable/disable funcon of the motor control is signalled by Arduino Digital
Pin 4 and 7. The Motor shield can be powered directly from Arduino or from external power source.
SKU # EP-0014
Arduino Motor Shield L293Rs. 1,050L293D is a monolithic integrated, high volt-
age, high current, 4-channel driver.Basi-
cally this means using this chip you can use
DC motors and power supplies of up to 36
Volts, thats some prey big motors and
the chip can supply a maximum current of
600mA per channel, the L293D chip is alsowhat’s known as a type of H-Bridge. The H-
Bridge is typically an electrical circuit that
enables a voltage to be applied across a load
in either direcon to an output, e.g. motor.
SKU # EP-0085
Arduino Wireless RF ShieldRs. 970
This 315MHz RF Shield can be easily integrated seamlessly into exisng 315MHz wireless net-
works. Whatsmore, the XBee interface integrated on this module will provide you more wire-
less posibilies: 315M - Bluetooth, 315M - WiFi, 315M - ZigBee, etc. 315M wireless mod-
ules are widely used in areas like vehicle monitoring, home security system, wireless meter
reading, industrial data acquision system, wireless tag, wireless remote control system and so on.
d i
-
8/18/2019 Products Catalog 2015
8/468www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Arduino
SKU # EP-0088
Arduino LCD and Keypad ShieldRs. 900This is a very popular LCD Keypad shield for Arduino and other variants. It includes a 2x16
LCD display and 6 momentary push buons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface
with the LCD. Just one Analog Pin 0 is used to read the five pushbuons. The LCD shield sup-
ports contrast adjustment and back-lit on/off funcons. It also exposes five analog pins with
color code for easy analog sensor plugging and display. The on board LED indicates power on.
SKU # EP-0086
Arduino Xbee ShieldRs. 1,640The XBee Expansion Board is a compli-
ant soluon designed to meet low-cost,
low-power wireless sensor networks with
special needs. The module is easy to use,
low power consumpon, and the provi-
sion of crical data between devices reli-
able transmission. As the innovave design,XBee-PRO can be in the range 2-3 mes be-
yond the standard ZigBee modules. XBee-
PRO modules work in the ISM 2.4 GHz fre-
quency band. The MaxStream’s XBee (1
mW) Zigbee module is pin-compable. The
Xbee module is widely used in the United
States, Canada, Australia, Israel and Europe.
SKU # EP-0083
Arduino WiFi ShieldRs. 6,450The shield uses WizFi210which is a low power-consuming WIFI module which is applied
with dynamic power management technology. When the WIFI module needs to be on but not
work, it can be set to Standby mode a low power mode, and the module just needs to be wok-
en up when it has to work. The WIFI wireless module is based on WizFi210. It provides the
bridging from TTL serial port communicaon to IEEE802.11b/g/n wireless communicaon.
A d i
-
8/18/2019 Products Catalog 2015
9/469 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Arduino
SKU # EP-0120
2.4" LCD Expansion Shield for ArduinoRs. 1,100
This is the 2.4” LCD shield for arduino. If you want to aach the 2.4” touch screen
TFT LCD with your arduino, then this board comes handy. Just mount the LCD
on this shield and place this shield on your favourite arduino module and en-
joy the benefits of a 65K colour display with touch capabilies in your project.
SKU # EP-0119
2.4" LCD Touch ScreenRs. 2,450This LCD touch screen shield is a good solu-
on for those seeking for a bigger resoluon
display. It is basically an LCD, a touch panel
and a LCD controller board combined in one
package. 262K rich colors display able to dis-
play images directly from the mini SD card
reader, or program your prefered text on Ar-duino. It has a resoluon of 240x320 and an
ADS7843 compable touch panel controller.
It also has sandard SD card cage and comes
with an on board 3.3V voltage regulator.
It can be esily driverd by 8051 / AVR / PIC/
DSP / FPGA and other low power controllers.
SKU # EP-0091
Capacive Touch Kit (Arduino Compable)Rs. 2,400
Now, it is me to add a more fancy interacve way to your project. This touch kit comes with three
types touch sensors. An ipod styple wheel touch, a keypad touch which supports backlit and a grid
touch pad which can recoginze something unique. This kit ulizes the not very “latest” capacve
touch technology which make the sensing very sensive. The kit is designed to be compable with
Arduino.
R berr Pi nd A e orie
-
8/18/2019 Products Catalog 2015
10/4610www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0025
Raspberry Pi Camera ModuleRs. 5,000Give Vision to your Raspberry Pi with this miniature sophiscated Camera Module. It is a custom
designed add-on for Raspberry Pi. It aaches to Raspberry Pi by way of one of the two small sockets
on the board. This interface uses the dedicated CSI interface, which is designed especially for inter-
facing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel
data. The sensor itself has a nave resoluon of 5 megapixel, and has a fixed focus lens onboard.
SKU # EP-0131
Raspberry Pi Model B+Rs. 5,650The Model B+ is the higher-spec variant of
the Raspberry Pi. It was released to replace
the original Model B in mid 2014. Compar-
ing with Model B it has below features:
The GPIO header has expanded to 40 pins.
It now have 4 USB 2.0 ports, compared to
2 on the Model B. The old fricon-fit SDcard socket has been replaced with a much
nicer push-push micro SD version. It has
lower power consumpon of only 0.5Wa.
The audio circuit incorporates a dedicated
low-noise power supply. The form factor is
much neater now due to allignment of all
the ports on one side of the Raspberry Pi.
SKU # EP-0019
Raspberry Pi Model BRs. 5,500The Raspberry Pi is a credit-card sized computer board that plugs into a TV and a keyboard. It’s
a miniature ARM-based PC which can be used for many of the things that a desktop PC does,
like spreadsheets, word-processing and games. It also plays High-Definion video. Available in
two versions; Model A and Model B. This is an open-source product designed to be supported
by Internet-based user forums. As a starng point refer to the Offi cial website at raspberrypi.org.
Raspberry Pi and Accessories
Raspberry Pi and Accessories
-
8/18/2019 Products Catalog 2015
11/46
11 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0103
Pure Copper Heatsinks for Raspberry PiRs. 250
This ny lile orange heatsink is a perfect soluon for cooling off small surface-mount com-
ponents such as stepper driver or CPUs on Raspberry Pi or mini PC. It is made of pure cop-
per to increase heat dissipaon and transfer for your machine running cooler in summer.
The applicaons include: Cooling for Raspberry Pi. It is Aachable to oth-
er sensors or actuators like high load motor controllers and Cooling stepper motors.
SKU # EP-0026
Raspberry Pi WiFi ModuleRs. 1,300Raspberry Pi donot comes with builn WiFi.
You can use this nano WiFi USB Adapter to
connect your raspberry pi with any wifi net-
work wirelessly. This EP-N8508GS 150Mbps
mini wireless 802.11N USB adapter is the
world’s smallest. It adopts Realtek8188CUS
chip and 802.11n wireless transmissiontechnology. The transmission rate is up
to 150Mbps. Adopng intelligent energy-
saving technology, this product is able to
intelligently control the power supply and
automacally adjust the idle state of the
interface. It saves up to 50% of the energy.
It come with a built-in precision antenna.
SKU # EP-0095
Raspberry Pi GPIO Expansion BoardRs. 1,100
You may have noced that the MCU on Raspberry Pi is much more complicated than the one on Ardui-
nos. It is usually BGA encapsulated, and stacked with one DDR memory. That means short circuingthe GPIO can be fatal - burning the CPU on Raspberry Pi, and unlike the UNO, there is no comeback.
So we made this GPIO Extension Board for Raspberries Pi, with protecon design. This extension
board uses 74hc244, 74hc125 for level conversion and protects your circuit from burning by mistakes.
Raspberry Pi and Accessories
Raspberry Pi and Accessories
-
8/18/2019 Products Catalog 2015
12/46
12www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0069
SD Card 8GB (Class 4)Rs. 800These high quality SD card are pre-installed
with Raspberry Pi OS (NOOBS). So you can
just plug these card into your Raspberry Pi
and get it running in no me. SD cards as
compared to Micro SD cards, are specifi-
cally designed for handling large data files
read and write. So these memory cardswhen used with Raspberry Pi will give fast-
er boot mes and improved performance.
SKU # EP-0070
SD Card 8GB (Class 10)Rs. 1,200These are premium Class 10 high speed SD memory cards. These high quality SD card are
pre-installed with Raspberry Pi OS (NOOBS). So you can just plug these card into your Rasp-berry Pi and get it running in no me. These SD cards are specially recommened for Rasp-
berry PI because of their high speed and blazing fast performance. SD cards as compared
to Micro SD cards, are specifically designed for handling large data files read and write.
Raspberry Pi and Accessories
Development Boards & Programmers
-
8/18/2019 Products Catalog 2015
13/46
13 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0020
AVR Incircuit ProgrammerRs. 850This is a simple to use USB AVR programmer.
It is low cost, easy to use, works great with
AVRDude, and is tested extensively on a Win-
dows desktop. This is a low-cost program-
mer designed for those on a ght budget.
This programmer works really well for all
the AVR micros supported by AVRDUDE.This board is buff ered and power pro-
tected so that you can do some really evil
things to the programmer without killing
it. It is fast! One of the greatest features of
this board is the ability to power the tar-
get (up to 500mA) from the programmer.
SKU # EP-0017
Android IOIORs. 4,950
The IOIO (pronounced “yo-yo”) is a board specially designed to work with your Android 1.5 and
later device. The board provides robust connecvity to an Android device via a USB or Blue-tooth connecon and is fully controllable from within an Android applicaon using a simple and
intuive Java API -no embedded programming or external programmer will ever be needed!
Development Boards & Programmers
SKU # EP-0018
Pickit 3 - Incircuit Programmer/Debugger for PICRs. 7,950
The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcon-
trollers at a most aff ordable price point using the powerful graphical user interface of the MPLAB
X Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design
engineer’s PC using a full speed USB interface and can be connected to the target via an Micro-
chip debug (RJ-11) connector (compable with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).
Development Boards & Programmers
-
8/18/2019 Products Catalog 2015
14/46
14 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0129
RTL SDR (So
ware Defi
nedRadio) TV28T v2Rs. 2,400RTL-SDR is a very cheap soware defined
radio that uses a DVB-T TV tuner dongle
based on the RTL2832U chipset. Essenally,
this means that this USB dongle with the
RTL2832U chip can be used as a computer
based radio scanner. This sort of scanner ca-
pability would have cost hundreds or even
thousands just a few years ago. The RTL-SDR
is also oen referred to as RTL2832U, DVB-
T SDR. These units contain a Rafael Micro’s
R820T tuner IC. This means the dongle has
a tuning range of about 25MHz-1700MHz.
SKU # EP-0125
Universal IC Programmer (Genius G540)Rs. 5,600The Genius G540 Universal IC Programmer can be used to:
Read, Write, Erase, Blank Check and Encrypt MicrocontrollersRead, Write, Erase, Blank Check and Encrypt ICs
Read, Write, Erase, Blank Check and Encrypt EEPROMs
Development Boards & Programmers
Wireless
-
8/18/2019 Products Catalog 2015
15/46
15 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0081
Xbee Pro 60mW Wire AnteenaRs. 5,150
This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formally Maxstream). The Pro
series have the same pinout and command set of the basic series with an increase output power of 60mW!
These modules allow a very reliable and simple communicaon between microcontrollers, comput-
ers, systems, really anything with a serial port! Point to point and mul-point networks are supported.
SKU # EP-0098
2mm 10 Pin Xbee SocketRs. 70This is a 10-pin socket with 2mm pitch
that mates with the popular XBee radio
from Maxstream. Use this small part to
avoid having to solder your precious ra-
dio to a PCB. You’ll need two of these sock-
ets to connect to all 20 pins on the XBee.
Please Note: This item is soldas a single side, not in pairs.
SKU # EP-0082
Xbee 1mW Wire AnteenaRs. 2,900
This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take
the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. Thesemodules allow a very reliable and simple communicaon between microcontrollers, computers,
systems, really anything with a serial port! Point to point and mul-point networks are supported.
Wireless
Wireless
-
8/18/2019 Products Catalog 2015
16/46
16www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0042
Wireless Transceiver NRF905Rs. 900This wireless module board using high-performance Nordic VLSI NRF905 radio chip, the
maximum transmission data rates up to 50Kbps with GFSK, sensivity to-100dBm, high re-
liability, can be widely used in various occasions, short-range wireless communicaons
(such as wireless meter reading, industrial remote control, low-power handheld equip-
ment, etc.). This is a transceiver module, so it can be used both as a transmier and a receiver.
SKU # EP-0048
Bluetooth Transceiver HC-05Rs. 1,100HC-05 module is an easy to use Bluetooth SPP
(Serial Port Protocol) module, designed for
transparent wireless serial connecon setup.
Serial port Bluetooth module is fully quali-
fied Bluetooth V2.0+EDR (Enhanced Data
Rate) 3Mbps Modulaon with complete
2.4GHz radio transceiver and baseband. Ituses CSR Bluecore 04-External single chip
Bluetooth system with CMOS technology
and with AFH(Adapve Frequency Hop-
ping Feature). It has the footprint as small
as 12.7mmx27mm. Hope it will simplify
your overall design/development cycle.
SKU # EP-0087
Xbee USB Xplorer (FTDI Ready)Rs. 2,350The upgraded Xbee USB adapter is designed for the XBee module configuraon parameters to facilitate
using or to work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pinfor FTDI so that users can directly use the adapter as a FTDI program writer, such as Arduino FIO/pro/
mini, lilypad Arduino and so on. It’s a must-have for interacve electronic installaons and projects.
Wireless
-
8/18/2019 Products Catalog 2015
17/46
17 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0106
NFC TagRs. 150
NFC Tag (13.56MHz) is widely used in electronic locks or customer idenficaon as well as other sys-
tems where a small and easy to carry tag is desired. The tag contains a NXP S50 chip and an antenna,
and is passively powered by the reader/writer when placed a couple inches away. This Mifare-One
NFC tag can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.
SKU # EP-0092
NFC ModuleRs. 2,750
Near Field Communicaons(NFC) is a set
of short-range wireless technologies, typi-
cally requiring a distance of 10cm or less,
for two devices such as smartphones or the
similar things very close to each other to
establish communicaon. The NFC Module
for Arduino is designed to extend this pow-erful feature for your project or applicaon
based on Arduino. It integrates a PN532
NFC controller from Philips. The driver in-
terface for this product is UART interface of
the microcontroller. So it’s possible for you to
test it via a USB to UART converter directly.
SKU # EP-0116
Serial to WiFi Transceiver Module (USR-WIFI232-B)Rs. 2,250
WIFI232 Module (with anteena) is a tool for MCU link to WIFI network, work for Transpar-
ent transmission! TCP server,TCP client and UDP mode can be choose! Data from serialto WIFI or WIFI to serial. It is very easy to use. You do not need to know a lot about WiFi pro-
tocols to use this module. The main advantage this module has over the other modules avail-
able in the market is its stability. Its soware is totally bug proof and it is tested thoroughly.
Wireless
-
8/18/2019 Products Catalog 2015
18/46
18www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0123
RFID Reader and Writer ModuleRs. 2,900RFID frequency idenficaon is a non-contact object recognion technology, it can auto-
maclly recognize target and get relevant data through RF signal, so there are so many in-teracve projects which need to use RFID to achieve object recognion. This RFID mod-
ule is desgined based on MFRC522. It is a highly integrated reader/writer for contactless
communicaon at 13.56MHz. It can be easily interface with any Arduino Module via Serial Port.
SKU # EP-0047
RFID Reader ModuleRs. 1,300MF522-AN RFID module adopts Philips
MFRC522 original reader circuit chip design,
easy to use, low cost, suitable for equipment
development, development of advanced
applicaons such as RFID card terminal de-
sign. This module operates at a frequency
of 13.56MHz and can read any RFID tag de-signed for this frequency. This module uses
voltage of 3.3V, and it can be connected
to any microcontroller like 8051, Ardui-
no, PIC and AVR via a simple SPI interface.
SKU # EP-0101
RFID Card 13.56MHzRs. 150I’m sure you can’t wait to have an indispensable unpowered RFID chip to make your RFID mod-
ule really work. This RFID card can be read by almost any 13.56MHz RFID reader. These chips
can be wrien to and store up to 1KB of data in writable EEPROM divided into banks, and can
handle over 100,000 re-writes. Every scker has a permanent 4-byte ID burned into the
chip that you can use to idenfy one tag from another - the ID number cannot be changed.
Wireless
-
8/18/2019 Products Catalog 2015
19/46
19 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0130
RFID Tag Keychain (13.56 MHz)Rs. 150
This product is designed to work with the RFID Card reader modules as well as the writer mod-
ules. An RFID tag is a microchip combined with an antenna in a compact package; the pack-aging is structured to allow the RFID tag to be aached to an object to be tracked. The tag’s
antenna picks up signals from an RFID reader or scanner and then returns the signal, usu-
ally with some addional data (like a unique serial number or other customized informaon).
Sensors
-
8/18/2019 Products Catalog 2015
20/46
20www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0046
GPS Module (Neo 6M)Rs. 3,500This is an updated GPS module that can be used with arduino. This GPS module uses the lat-
est technology to give the best possible posion informaon, allowing for beer performance
with your Arduino or other Mulrotor control pla orm. This module is equipped with U-blox
Neo-6M GPS Module. The features includes under 1 second me-to-first-fix for hot, aided
starts, SuperSense Indoor GPS: -162 dBm tracking sensivity and An-jamming technology
SKU # EP-0043
3-Axis Digital CompasRs. 850Digital Compas (Magnetometer) is a device
for measuring or maintaining orientaon.
This module has Honeywell’s HMC5883L,
a 3-axis digital compass. It can measure
Pitch, Yaw and XZ. This module has on
board voltage regulator and all other nec-
essary electronics (filtering capacitors etc.).Communicaon with the HMC5883L is sim-
ple and all done through an I2C interface.
SKU # EP-0041
Tripple Axis Accelerometer Sensor (MMA7361)Rs. 1,000Accelerometer is an instrument for measuring the acceleraon of a moving or vibrang body.
This module has Freescale’s MMA7361L three-axis analog MEMS accelerometer along with allthe necessary required electronics. The sensor requires a very low amount of power and has a
g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges.
Sensors
-
8/18/2019 Products Catalog 2015
21/46
21 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0074
Force Sensive ResistorRs. 820
This is a small force sensive resistor. It has a 0.16" (4 mm) diameter acve sensing area. This
FSR will vary its resistance depending on how much pressure is being applied to the sensing
area. The harder the force, the lower the resistance. When no pressure is being applied to the
FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ Two pins extend from the boom of the sensor with 0.1" pitch making it bread board friendly.
SKU # EP-0073
Flex Sensor 4.5"Rs. 1,850
Flex sensors are passive resisve devices that
can be used to detect bending or flexing. This
is a simple flex sensor 4.5" in length. As the
sensor is flexed, the resistance across the sen-
sor increases. Patented technology by Spec-
tra Symbol - they claim these sensors were
used in the original Nintendo Power Glove. Ilove the Nintendo Power Glove. It’s so bad!
The resistance of the flex sensor chang-
es when the metal pads are on the out-
side of the bend (text on inside of bend).
SKU # EP-0044
Barometric Pressure SensorRs. 1,400
The BMP085 off ers a measuring range of 300 to 1100 hPa with an accuracy down to 0.03 hPa
in ultra-high resoluon mode (that’s 0.25m of altude at sea level!) It’s based on piezo-resis-ve technology for high accuracy, ruggedness and long term stability. These come factory-cali-
brated, with the calibraon coeffi cients already stored in ROM. This barometric pressure mod-
ule is widely used for weather forecast, vercal speed indicator, fan power control and more.
Sensors
-
8/18/2019 Products Catalog 2015
22/46
22www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0003
Color Sensor (TCS230)Rs. 900The TCS230 color sensor combines configurable silicon photodiodes and a cur-
rent-to-frequency converter on a single monolithic CMOS integrated circuit. The
full-scale output frequency of this color sensor can be scaled by one of three pre-
set values via two control input pins. This TCS230 color sensor come with digital in-put and output which allow direct interface to a microcontroller or other logic circuitry.
SKU # EP-0056
3 Way Line Tracking SensorRs. 900Want to make a line following robot?
Not a big deal now with this highly effi -
cient 3 way Line Tracking Module. It has 3
TCRT5000 Infrared Line Tracking sensors
with on-board comparator, LED indica-
tors and other signal condioning compo-
nents. And yes it is Arduino compable!This module uses Infrared to detect the
line so it has an-interference ability, vis-
ible light will not interfere its operaon. The
TCRT5000 is a reflecve sensor which include
an infrared emier and phototransistor in a
leaded package which blocks visible light.
SKU # EP-0057
Like Tracking SensorRs. 300Want to make a line following robot? Not a big deal now with this highly effi cient Line Track-
ing Module. It has TCRT5000 Infrared Line Tracking module with on-board comparator, LED in-dicator and other signal condioning components. It also has a potenometer to adjust the
sensivity according to your applicaon and environment. And yes it is Arduino compable!
Sensors
-
8/18/2019 Products Catalog 2015
23/46
23 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0058
Obstacle Avoidance SensorRs. 350
This is an infrared based obstacle/hurdle detecon and avoidance module. When
an object is sensed it gives output 0, when there is no onject in front then out-
put is 1. This module has an infrared transmier, infrared receiver, encoder and de-
coder to generate and detect the infrared signal at a parcular high frequency.
SKU # EP-0089
Digital Magnec SensorRs. 460
What’s the best way to detect the magnet?
Use anther magnet. But it’s not sensive
enough. You have to feel it by youself.Right.
This magnec sensor knows whether there
is a magnec object nearby or not. And it
correctly tells you through digal output.
SKU # EP-0072
Ambient Light SensorRs. 650
Light sensors are probably one of the most common sensors in life, they can be found
in your laptop, phone or home lighng system. A light sensor measures the level of lightin a room or ambient light in a space. This module uses a special ambient light detec-
tor (TEMT6000) with spectral response that closely emulates the human eye. It help you to
to detect the light density and reflect the analog voltage signal back to Arduino controller.
Sensors
-
8/18/2019 Products Catalog 2015
24/46
24 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0078
Maxbox Ultrasonic Sensor MB1013Rs. 4,000The HRLV-MaxSonar-EZ products are high resoluon ultrasonic sensors, that provide a compo-
nent module soluon that off ers easy to use outputs, no sensor dead zone, calibrated beam pat-
terns, stable range readings, low power demands, and a host of other features including an ex-
traordinary 1mm resoluon, internal temperature compensaon, controlled beam shapeand an external temperature sensor.
SKU # EP-0001
Ultrasonic Sensor HC-SR04Rs. 300Ultrasonic ranging module HC - SR04
provides 2cm - 400cm non-contact
measurement funcon, the ranging ac-
curacy can reach to 3mm. The mod-
ules includes ultrasonic transmit-
ters, receiver and control circuit. The
Center resonant frequency is 40kHz ± 2kHz.The Transmi ng beam angle is 6O degrees.
SKU # EP-0071
Adjustable Infrared Sensor SwitchRs. 1,100This is an infrared distance switch. It has an adjustable detecon range, 3cm - 80cm. It is small,
easy to use, assemble, and inexpensive. Useful for robocs, interacve media, industrial as-sembly line, etc. Infrared wave length is part of the Sun’s natural light spectrum. While is a nice
fit for indoor projects, outdoors with plenty of sun light and reflecve surfaces on it’s sight
is not adviced. It’s incredibly repurposable and can be used for a lot of diff erent projects.
Sensors
-
8/18/2019 Products Catalog 2015
25/46
25 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0029
Sharp IR Range Sensor (20cm-150cm)Rs. 1,000
The Sharp GP2Y0A02YK0F distance sensor is a popular choice for many projects that require ac-
curate distance measurements. Its single analog output can be connected to an analog-to-digital
converter for taking distance measurements, or the output can be connected to a comparator for
threshold detecon. The detecon range of this version is approximately 20 cm to 150 cm (8″ to 60″).
SKU # EP-0030
Sharp IR Sensor (10cm-80cm)Rs. 850
The Sharp GP2Y0A21YK0F distance sen-
sor is a popular choice for many projects
that require accurate distance measure-
ments. The detecon range of this version
is approximately 10 cm to 80 cm (4″ to 32″).
The GP2Y0A21 uses a 3-pin JST connec-
tor that works with our 3-pin JST cables forSharp distance sensors. When looking at
the back, the three connecons from le
to right are power, ground, and the out-
put signal. The relaonship between the
sensor’s output voltage and the inverse
of the measured distance is approximate-
ly linear over the sensor’s usable range.
SKU # EP-0028
Sharp IR Range Sensor (4cm-30cm)Rs. 940
The Sharp distance sensors are a popular choice for many projects that require accurate distance
measurements. This GP2Y0A41SK0F sensor is more economical than sonar rangefinders, yet it pro-vides much beer performance than other IR alternaves. Interfacing to most microcontrollers is
straigh orward: the single analog output can be connected to an analog-to-digital converter for tak-
ing distance measurements, or the output can be connected to a comparator for threshold detecon.
Sensors
-
8/18/2019 Products Catalog 2015
26/46
26www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0127
Digital Temperature Sensor DS18B20Rs. 250While there are many types of temperature sensors available in the market, the DS18B20 Tempera-
ture Sensor form DALLAS is the best choice in applicaons which require high accuracy and high
reliability. Its ultra-small size, low hardware overhead, strong an-interference capability and high
accuracy, together with other addional features makes DS18B20 even more popular among users.
SKU # EP-0117
DHT22Rs. 1,100DHT22 is a compound digital temperature
and humidity sensor which outputs cali-
brated digital signals. DHT22 comes with
very high reliability and excellent long-
term stability. DHT22 includes a capacive
moisture sensor and a NTC temperature
measuring element which is connected toa high-performance 8-bit microcontroller,
resulng an excellent quality, super fast re-
sponse me, strong an-interference ability
and extremely cost-effi cient. DHT22 enjoys
a higher precision and lower price, making it
an ideal choice for mid price range, high per-
formance temperature & humidity sensors.
SKU # EP-0002
Temperature and Humidity Sensor DHT11Rs. 350DHT11 has a full range temperature compensaon, low power consumpon, long term sta-
bility and calibrated digital signal. A high-performance 8-bit microcontroller is integrated inthe sensor with calibraon-coeffi cient saved in OTP memory to provide accurate tempera-
ture readings. Single Wire system serial interface ,small volume low power consumpon, sig-
nal transmission distance can reach more than 20 meters, make it become a best choice.
Sensors
-
8/18/2019 Products Catalog 2015
27/46
27 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0051
Smoke Sensor (MQ-5)Rs. 480
This module has a sensive analoge smoke sensor (MQ-5) which can be used to detect smoke
and fire. It has all the required signal condioning components installed on it on-board. Its
senvity can be adjusted with the help of on-baord potenometer. The analog gas sensor
- MQ5 is used in gas leakage detecng equipments in consumer and industry markets, this sen-sor is suitable for detecng LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.
SKU # EP-0077
Steam SensorRs. 240
This steam sensor can be connected to
the Arduino IO Expansion shield directly.
The output voltage will increase when the
humidity of the sensor surface goes up.
Applicaons:
Simple rain detector
Cheap steam level switchTouch sensor based on humidity
SKU # EP-0004
Water Proof Temperature SensorRs. 500
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when
you need to measure something far away, or in wet condions. While the sensor isgood up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Be-
cause they are digital, you don’t get any signal degradaon even over long distances! The
DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface.
Sensors
-
8/18/2019 Products Catalog 2015
28/46
28www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0109
Flame Sensor (5 Channel)Rs. 1,500This five channel flame sensor design has wide range of detecon (greater than 120°).
It is able to output a digital signal (high and low), easy to use. It is also able to out-
put an analog signal (voltage signal), the measurement signal can be more accurate for
high precision. All five outputs have status indicator LEDs which helps in debugging.The sensor has a very flexible design as the output analog senvity is adjustable
SKU # EP-0108
Flame Sensor (Single)Rs. 400The flame sensor can be used to detect fire
or other wavelength at 760 nm ~ 1100 nm
light. In the fire-fighng robot game, the
flame plays an important role in the probe,
which can be used as the robot’s eyes to
find fire source or football. It can make its
use infi
re-fi
gh
ng robots and soccer ro-bots. It comes with an onboard LM393
comparator chip which is very stable in its
operaon. There is also a power indicator
LED and a digital sensor output LED mount-
ed on the sensor which helps in debugging
and monitoring the operaon of the sensor.
SKU # EP-0052
Gas Sensor (MQ-6)Rs. 600This module has one of the most frequently used gas sensor, the MQ-6. This sen-
sor is widely used to detect LPG, iso-butane and propane gas. This mod-ule has on-board comparator chip, resistors and capacitors required for the sensor.
So you do not need to use extra components with it to make it work.
Sensors
-
8/18/2019 Products Catalog 2015
29/46
29 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0114
Acve Buzzer ModuleRs. 350
Here is the simplest sound making module that you can use High/Low to drive it. Just change the
frequancy it buzz, you can hear diff erent sound. It is widely used on your daily aplliance, like PC,
fridgerator,phones and so on. And you also can create many interesng interacve project with
this small but useful module. Just try it!! You will find that creang electronic sound is so funny.
SKU # EP-0090
Analog Rotaon SensorRs. 480
This Rotaon Sensor V1 is arduino compat-
ible and can be rotated upto 300-degree. It
is based on the potenometer. With the Ar-
duino IO expansion board, in combinaon,
it can be very easy to achieve posion-de-
pendent interacon with the rotang eff ect
or produce MIDI instrument. So with thissensor you can learn how rotary potenom-
eter works and what analog signal is. You can
have much fun with this basic input device.
SKU # EP-0115
Analog Sound SensorRs. 650
This is an updated version of the Analog Sound Sensor. Analog Sound Sensor is typical-
ly used in detecng the loudness. You may use it to make some funny interacve workssuch as a “clap and buzz” to find your lost keys or remote control if you add a buzzer. It
can detect the surrounding sound then output analog value. You can set a sound value
then it will output digital value. The adjustable sensivity gives a very stable performance.
Sensors
-
8/18/2019 Products Catalog 2015
30/46
30www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0080
Crash SensorRs. 410This is a small micro switch sensor designed for the Arduino. It could be direct-
ly connected to the IO Expansion shield. It integrates the pull-up resistor and the sta-
tus indicator LED onboard. That makes it easier for tesng.The miniature snap-acon mi-
cro switch with roller lever make it suitable for more diff erent environment applicaon.
SKU # EP-0066
Current Sensor 5AmpRs. 440This is a current sensing module which can be
used to measure current upto 5 Amperes. It
has Allegro Microsystem’s ACS712ELCTR-05B-
T current sensing IC installed in it. ACS712
is a Fully Integrated, Hall Eff ect-Based Lin-
ear Current Sensor IC with 2.1 kVRMS Iso-
laon and a Low-Resistance Current Con-
ductor. This module has on-board resistors
and capacitors which are required for the
funconing of the current sensing module.
SKU # EP-0065
Current Sensor 30Amp (ACS712)Rs. 440This is a current sensing module which can be used to measure current upto 30 Am-
peres. It has Allegro Microsystem’s ACS712ELCTR-30A-T current sensing IC installed in it.ACS712 is a Fully Integrated, Hall Eff ect-Based Linear Current Sensor IC with 2.1 kVRMS
Isolaon and a Low-Resistance Current Conductor. This module has on-board resis-
tors and capacitors which are required for the funconing of the current sensing module.
Sensors
-
8/18/2019 Products Catalog 2015
31/46
31 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0076
Soil Moisture SensorRs. 550
A soil moisture sensor can read the amount of moisture present in the soil surround-
ing it. It’s a low tech sensor, but ideal for monitoring an urban garden, or your pet plant’s
water level. This is a must have tool for a connected garden! This sensor will be help-
ful to remind you to water your indoor plants or to monitor the soil moisture in your gar-den. The IO Expansion Shield is the perfect shield to connect this senor to Arduino.
SKU # EP-0054
Vibraon SensorRs. 360
What’s the simplest way to check vibra-
on with Arduino? Use a vibraon sensor
from Proveedor. You can directly plug it on
our IO Expesion Shield V7. Just vibrate this
sensor, Arduino can receive a digital sig-
nal. It’s easy to acount and program in Ar-
duino. Despite it’s simple, you can make
full use of it with creave thinking, like step
counng, Crash warning light and so on.
In silent surrounding it keeps its turning off
state. When a vibraon or shaking is occured
then it will display turning on state for short
me. When the external force disappears
it comes back again to its turning off state.
SKU # EP-0053
Tilt SensorRs. 450
This Tilt switch can easily be used to detect orientaon. Inside the can are a pair of balls
that make contact with the pins when the case is upright. Tilt the case over and the ballsdon’t touch, thus not making a connecon. This module has a lt switch, an LED indi-
cator and signal condioning resistors, so it is all set to go. Just plug it and use it. Sim-
ple plug to our IO/Sensor Expansion board, you can make amazing interacve projects.
Sensors
SKU # EP 0107
-
8/18/2019 Products Catalog 2015
32/46
32www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0050
Heartbeat Measurement SensorRs. 460This is a heartbeat measurement module. It can measure the heartbeat from hu-
man finger. It uses infrared light for the measurement of heartbeat. This mod-
ule is Arduino Compable, so you can use it easily with your favourite Arduino Board.
SKU # EP-0059
Fingerprint Sensor (Opcal)Rs. 6,750This is a fingerprint with an integrated fin-
gerprint collecng single chip processor. It
features small size, low power consump-
on, simple ports, high reliability, small fin-
gerprint template, large fingerprint capacity,
etc. It’s convenient to be embedded to user
system for realizing clients required finger-
print verificaon products. Its outstandingly
feature is self-learning funcon. During the
fingerprint verificaon process, the latest
collected fingerprint features would be in-
tegrated into the fingerprint database auto-
macally so that the users would obtain bet-
ter and beer fingerprint verificaon result.
SKU # EP-0107
Moon Sensor / PIR SensorRs. 400This is a simple to use moon sensor. Power it up and wait 1-2 seconds for the sen-
sor to get a snapshot of the sll room. If anything moves aer that period, the‘alarm’ pin will go low. This sensor checks for infrared heat in it’s detecng an-
gle. Human body, pets and several other things emit energy that the sensor is look-
ing for, it compares with the snapshot and if there is a recent change it triggers.
Sensors
SKU # EP 0113
-
8/18/2019 Products Catalog 2015
33/46
33 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0097
Motor Speed SensorRs. 350
This speed sensor measure the speed of
the motor sha using infrared. A disk en-
coder is mounted on the sha of the mo-
tor, which rotates with it, this sensor sense
the rotaon of that encoder disk and
gives the output accordingly. it has a built
in Schmidt trigger which gives high sen-
sivity and ensure stable performance
SKU # EP-0113
Water/Liquid Flow Rate SensorRs. 1,700
The plasc flow sensor is produced by POM matrail, achieving the FDA standard, widely used
in RO water instrument, dispenser water, water heang systerm, drinking water systerm, tocalculate the flow rate. The flow measurement range is Flow Range: 0.1L/mim ~ 4.5 L/min.
Robotics
SKU # EP 0064
-
8/18/2019 Products Catalog 2015
34/46
34 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0064
Roboc Hand 6DOF (Complete with Servos and Controller)Rs. 25,999This 6 Degrees of Freedom Roboc Arm is made from 3mm thick aluminum sheet and uses 6
x MG996R servos for the base and the arm. The 2 x Servo operate the wrist and gripper. A se-rial interface and PC soware is included. Since the arm has a few joints, we can imagine
our human arm. In addion to shoulder, elbow, and wrist, coupled with the finger joints;
there are a lot of joints to give you complete freedom of the movement of this roboc hand.
SKU # EP-0011
Arduino Bluetooth CarRs. 9,999This android based roboc car is ide-
al for students and hobbyists. It has lots
of funcons which can serve as learn-
ing purposes. Can be programmed eas-
ily with tons of published free codes.
Features:
Bluetooth Controlled
Line following with IR sensor
Hurdle Avoidance with ultrasonic sensor
Infrared Remote Controlled
Remote control range: 10 meters
SKU # EP-0104
MiniQ 2WD Robot - Complete Kit (Arduino Compable)Rs. 8,200MiniQ product family is one of our most loved products, it’s a complete roboc learning pla orm,
with low cost and a good learning curve. This lile robot kit provides most of what you need. This Mi-
niQ 2WD Kit not only comes with new Arduino Leonardo controller but also integrates useful mod-
ules such as buzzer, RGB LED, photosensive diode, infrared LED receiver and compass. This updatedkit is more convenient for you to create a obstacle avoidance robot or direcon detecon robot.
SKU # MP-0012
Robotics
-
8/18/2019 Products Catalog 2015
35/46
35 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # MP-0009
Robot GripperRs. 1,600
How can your robot rule the world with an iron fist if it doesn’t have any
hands? This metal robot gripper makes a great addion to a small arm or mo-
bile base. This gripper is made from 3mm thick aluminum. The gripper will
open in excess of 50mm. It can be used with two MG996R Servo Motors.
SKU # MP-0006
Strong Robot Gripper
Rs. 3,750This robot gripper is perfect for all your grip-
ping needs. Made from a heavy duty but light-
weight PVC, it comes with four standard M4
thread holes on the boom for easy assembly.
Features:
Self-locking fingers
Extra an-slip material on the inside of two
fingers
A built-in reseable fuse protects the N20
screw motor from short-circuits and over-
current
Voltage: 12v
Operang current: ≤110mA
Speed: 600±10%RPM
SKU # MP 0012
2WD Car ChasisRs. 2,700
DC 6V 2-wheel Robot Smart Car Chassis with Speed Encoder for Arduino. The mechani-
cal structure is very simple and easy to install. An excellent pla orm for Line Following ro-bots and Maze Solving Robots. The chassis has enough room for all the necessary elec-
tronics. This robot chassis together with Arduino UNO R3 makes an ideal DIY project Kit.
SKU # MP-0004
Robotics
-
8/18/2019 Products Catalog 2015
36/46
36www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # MP-0008
Omni Wheel 100mm (Double Plasc)Rs. 3,450The (4 inch) 100mm plasc omni wheel is a robust, durable and double row
wheel that provides easy 360° movement, with rotaonal and sideways ma-
neuverability. Its key features includes: Omni direcon movement and rotaon,
easy direcon control and tracking, ability to make turning fast, Unique fixedorientaon of the roboc pla orm, Stable mounng opons and Superior load stability.
SKU # MP-0007
Mecanum Wheels 60mm
(Complete Set)Rs. 11,950The 60mm aluminum mecanum wheel is
the smallest size mecanum wheel in all of
our mecanum wheels, the set of 60mm
mecanum wheels includes 2 le wheels
and 2 right wheels. It is a LEGO compat-
ible mecanum wheel, it comes with acompable hub. Each wheel is comprised
of 8 rubber rollers, these axles and roll-
ers are sandwiched between two alu-
minum plates, use these mecanum wheels
on your robot, it can be able to forward/
backward movement, but also side to sie.
SKU # MP 0004
Mecanum Wheels 100mm (Complete Set)Rs. 22,950The set of 100mm(4 inch) mecanum wheel includes 2 right wheels and 2 le wheels. Each
wheel is comprised of 9 rollers. It is driven independently. Mecanum wheel can be capa-ble of moving in any direcon, no need to change the direcons the wheel spin. Every of
the four wheels contain a series of rollers which have an axis of rotaon at 45° to the plane of
the wheel in a plane parallel to the axis of rotaon of the wheel aached to its circumference.
Robotics
SKU # MP-0005
-
8/18/2019 Products Catalog 2015
37/46
37 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
Omni Wheels 60mm (Double Aluminium)Rs. 2,150
The 60mm Double Aluminum Omni Wheel is a robust, durable and double row wheel that pro-
vides easy 360° movement, with rotaonal and sideways maneuverability. It includes 10 rub-ber rollers, the rollers are mounted along its circumstance and the rubber rollers to avoid slip.
SKU # MP-0013
Metal Ball Caster
Rs. 420Metal ball caster, 1mm thick steel plate
from the machine stamping, it has the cap-
bility to support 15KG payload. The Caster
is strong and lightweight. It has 20mm high
round body, with a total weight of only
37g; and large steel ball around a small ball
around as much as 40 to rotate the main
scroll ball much more smoothly, which
make the robot walk or move at a more
flexible and comfortable way. Our popular
2WD Arduino Pla orm adapts this caster.
SKU # MP-0014
DC Gear Motor (High Torque)Rs. 2,960
This DC motor with gear box is ideal for robocs projects. It has very high torque along
with high speed. Best accompanied with mecanum and omni wheels. Its specs are:
Rated RPM: 250 rev/min , Rated Torque: 12kg.cm
Average Current: 1.6 Amp , Stall Current: 6 AmpNominal Voltages: 12V , Operang Voltages: 9-24V
SKU # MP-0002
Robotics
-
8/18/2019 Products Catalog 2015
38/46
38www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # MP-0011
DC Servo Motor (Connuous Rotaon)Rs. 1,050DS04-NFC is a 38gram servo motor with 5.5kg torque and a 360 degree connuous rotaon ca-
pability. This can be used with robot car and mulcopter kits. Usually the servo motors are de-
signed to have less than 360 degree rotaon which unables them to have a connuous rotaon.
But this parcular servo motor is specifically designed with the ability to rotate 360 degrees.
SKU # MP-0010
DC Servo Motor (10kg Torque)
Rs. 1,450MG996R is a metal gear servo with an im-
pressive 10kg torque. This is essenally an
upgraded version of the famous towerpro
MG995 servo. It now has a redesigned PCB
and IC controll system which makes it far
more accurate. Its internal gearing and mo-
tor are also upgraded to improve dead band-
with and centering. All specificaons are
the same as the previous model MG995,
however this servo is far more accurate, and
safe to use in aircra which require precise
servo movements and perfect centering.
DC Gear Motor with WheelRs. 500This is a medium power DC motor connected with a wheel. Two of these DC motors
and wheels will be suffi
cient to provide you a diff
eren
al drive mechanism or you canuse four of these modules to have an all wheel drive mechanism. The choice is yours!
Combine it with an Arduino of your choice and you can have an obstacle avoidance ro-
bot, or a line following robot or a fire fighng robot or some other which you like.
SKU # MP-0003
Robotics
-
8/18/2019 Products Catalog 2015
39/46
39 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0124
DC and Stepper Motor DriverRs. 850
The heart of this module is L298N Dual H-Bridge Motor Driver IC. L298 contains two H-
bridges, capable of supplying currents up to 2 A each. This module can be used to drive
DC Motors and Stepper Motors as well This module has indicator LEDs and protecon di-
odes installed on it. A voltage regulator is also built in on this module. So it is a plug andplay type. Just connect it with your supply and your motors and you are good to go !
SKU # MP-0001
Stepper Motor (5V)
Rs. 400This small stepper motor is very easy to
use and interface with any microcontroller.
Stepper Motors are used where precise
and connuous movements are required.
It is a brushless DC electric motor that di-
vides a full rotaon into a number of equal
steps. The motor’s posion can then be
commanded to move and hold at one of
these steps without any feedback sensor
(an open-loop controller), as long as the
motor is carefully sized to the applicaon.
9gram Micro Servo MotorRs. 500
This is a 9 gram micro servo motor from Tower Pro. Servo motors are one of the
most widely used parts of the robots. They provide precise mo
on. Such micro ser-vo motors are mostly used in airplane controls because of their light weight and com-
pact dimensions. This micro servo motor has a surprising torque of 1.2-1.4kg/cm
Robotics
SKU # EP-0128
-
8/18/2019 Products Catalog 2015
40/46
40www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # MP-0015
DC Gear Motor with Encoder
Rs. 7,475This DC motor with planetary gear box is
parcularly recommended for NERC and
Robosprint. This is a custom built motor
with very unique specificaons, ideal for
robocs projects. It has very high torque along
with high speed. Best accompanied with
mecanum and omni wheels. Its specs are:
Rated RPM: 390 rev/min
Rated Torque: 1.4Nm or 14.5kg.cm
No Load Current: 350 mA
Stall Current: 3 A
Nominal Voltages: 24V
Diameter: 45mm
High Power DC Motor Driver (43Amp)Rs. 2,350This is a H Bridge DC Motor driver built with 2 Infineon BTS7960 High Current Half Bridg-
es. the BTS7960 is part of the NovalithICTM family containing one p-channel highside MOS-FET and one n-channel lowside MOSFET with an integrated driver IC in one package. Due to
the p-channel highside switch the need for a charge pump is eliminated thus minimizing EMI.
SKU # EP-0040
Miscelleneous Components
-
8/18/2019 Products Catalog 2015
41/46
41 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0038
DC-DC Step Down Module (High Power)Rs. 600
This is a voltage regulator module with switching regulator instead of linear regula-
tors (LM7805, LM7812 etc). Switching Regulators have low power losses and high effi -
ciency with higher output currents as compared to Linear Regulators. This module has a
step down switching regulator with all the necessary components installed on one board.The output can be adjustable from 4V to 32V with the help of on-board potenometer.
SKU # EP-0037
DC-DC Step Down Module
Rs. 250This is a voltage regulator module with
switching regulator (LM2596S) instead of
linear regulators (LM7805, LM7812 etc).
Switching Regulators have low power loss-
es and high effi ciency with higher output
currents as compared to Linear Regula-
tors. This module has Texas Instrument’s
most popular step down switching regula-
tor, the LM2596S, with all the necessary
components installed on one board. The
output can be adjustable from 1.5V to 35V
with the help of on-board potenometer.
5V DC Power Supply ModuleRs. 250
This is an AC to DC power supply module based on LM7805. Very useful for every elec-
tronics project specially those with digital circuitry or microcontrollers. Simply connect astep down transformer at its input and it will give you stable and clean DC 5V at its out-
put. It has builn bridge recfier and capacitor. So you do not have to use any other compo-
nent with it. You can even give DC voltages to its inputs, it will sll produce DC 5V voltages.
SKU # EP-0039
d l
Miscelleneous Components
-
8/18/2019 Products Catalog 2015
42/46
42www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0121
Logic Level Converter (4 Channel)Rs. 470If you’ve ever tried to connect a 3.3V (or 3V) device to a 5V system, you know what a chal-
lenge it can be. This bi-direconal logic level converter is a small device that safely steps down
5V signals to 3.3V AND steps up 3.3V to 5V at the same me. This level converter also works
with 2.8V and 1.8V devices. Each level converter has the capability of converng 4 pins onthe high side to 4 pins on the low side with two inputs and two outputs provided for each side.
SKU # EP-0122
Relay Module
Rs. 360This is a Single Channel Relay Module with
Double Isolaon, driving transistors, switch-
ing indicator LEDs. This module provides
both the normally opened pole and the
normally closed pole. Some of the most
common applicaons with Arduino are:
Home lighng, electrical appliances of high
power and other equipments. The modu-
lar design makes it easy to integrate with
a controller board. The Relay integrates a
status LED, in order to acknowledge visu-
ally it’s status ON or OFF. It can be controlled
through the digital IO port, with a simple
HIGH or LOW on Arduino compable boards.
DC-DC Step Up Module 4-35V , 3AmpRs. 870This is a DC to DC voltage step up module. It will increase the input voltages and produce high-
er output votages. It has Texas Instrument’s popular DC DC Boost switching voltage regulator, theLM2577, with all the other necessary components installed on boards. Its output is adjustable
form 4V to 35V with and ample current of 3Amp. It is a switching regulator so it has lower power
losses and higher effi ciency. Now you can have your 6V Baery produce 12V or even 24V output!
SKU # EP-0067
USB t S i l (UART) C t
Miscelleneous Components
-
8/18/2019 Products Catalog 2015
43/46
43 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0055
Real Time Clock Module with EEPROM and BaeryRs. 580
This is the DS1307 Real Time Clock Module with on-board baery and 32Kb EEPROM (AT24C32)
to store the me data. The module comes fully assembled and pre-programmed with the current
me. The included Lithium coin cell baery (CR1225 41mAh) will run the module for a minimum of
9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol.
SKU # EP-0049
Laser Diode Module (650nm)
Rs. 300This 5V laser head is very easy to use. You
can easily use it with your Arduino or any
other microcontroller of your own choice.
It has 650 nm wavelength and 5Mw power.
This laser can be used in various projects
such as Laser Keyboard, Photoelectric Count-
ing, Security Applicaons, The Detecon,
Object Detecon and Mul-touch Pads.
USB to Serial (UART) ConverterRs. 430
Serial or UART communicaon is a part of almost every project these days. Old com-
puters and laptops had RS232 serial communica
on but it is not present in newlaptops. So serial communicaon between laptops and microcontrollers be-
comes a problem. This module present a soluon to this problem. This is a USB
to Serial converter. It is based on Prolific’s PL-2303 USB to Serial Bridge Controller.
SKU # EP-0068
Infrared Remote and Receiver Kit
Miscelleneous Components
-
8/18/2019 Products Catalog 2015
44/46
44 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0062
Wireless RF CameraRs. 2,500This Wireless camera is ideal to use in projects where you want to have the video sent to you wirelessly.
Its ny size for discreet observaon and portability. It has built-in microphone for audio monitoring.
Specificaons:
4 channels oponal to avoid possible interferenceUp to 100m (330.) transmission range in open space
SKU # EP-0110
Arduino Jumper Cables
Rs. 10Jumper wires are one of the most impor-
tant gear component for the nkerer. Oen
undersmated, but one of the first things
to miss. If you are starng to assemble your
nker gear and wondering if this is really
needed, doubt not, this is at some point or
another always used. Wire or pieces or wire
are basic, even for the non-oen nkerers.
Jumper wires are not just fied for proto-
typing but also a resource for repurpos-
ing. You can cut them and add new head-
ers, or mix them up and connect or bridge
several things. Due to their low cost and
high usability these are a must on any gear.
Infrared Remote and Receiver KitRs. 720Ever wanted to control your robot from a distance? Then this module is for you! The infrared re-
mote control kit for Arduino consists of the receiver module, remote control and the jumper wire.The receiver module uses HX1838, the integrated receving element, which includes the sensing,
amplify, recify, and outputs the TTL signal that can be connected directly to the I/O pin of a MCU.
SKU # EP-0096
Barcode Reader/Scanner Module (CCD Camera)
Miscelleneous Components
-
8/18/2019 Products Catalog 2015
45/46
45 www.proveedor.com.pk www.facebook.com/proveedor.intl www.plus.google.com/+ProveedorPk1
SKU # EP-0063
Cartoon USB Flash Drive 16Gb
Rs. 1,400These are specially designed Shock
Resistant USB Flash Drives. Avail-
able in diff erent shapes like Min-
ions, Cartoons, Soccer t-shirts etc.
Barcode Reader/Scanner Module (CCD Camera)Rs. 5,550
This Barcode Reader/Scanner Module with CCD Camera is a perfect choice for your OEM de-
sign. It brings the benefits of barcode scanning to all types of OEM devices. You will be
able to use this cu ng-edge scanning technology in projects such as kiosks, medical instru-
ments, diagnosc equipment, loery machines, vending machines ... to name but a few.
-
8/18/2019 Products Catalog 2015
46/46
Empowering Your Dreams...
W: www.proveedor.com.pk
F: www.facebook.com/proveedor.intl
G: www.plus.google.com/+ProveedorPK1
M: 0321-4189558A: 386-B2, Johar Town, Lahore, Pakistan
Products Catalog 2015
Proveedor Pvt. Limited