product: vertical wideband lte antenna part no… · part no.1002436 lte vertical wideband embedded...

Ethertronics’ Prestta series of Isolated Magnetic Dipole™ (IMD) embedded antennas address the challenges facing today’s product designers. IMD’s high performance and isolation characteristics offer better connectivity and minimal interference.

Stays in TuneIMD antenna technology provides superior RF field containment, resulting in less interaction with surrounding components. Ethertronics IMD antennas resist detuning; providing a robust radio link regardless of the usage position.

Prestta antennas use patented IMD technology in a stamped metal configuration to provide high performance. IMD antennas requires a smaller design keep-out area, carry lower program development risk which yields a quicker time-to-market, without sacrificing RF performance.

Part No.1002436 LTE Vertical Wideband Embedded Antenna 704–960MHz / 1710–2700MHz

DATASHEETPart No. 1002436

Product: Vertical

Wideband LTE Antenna

FrequencyLTE, GSM, EGSM704 – 960 MHz

LTE, DCS, PCS, WCDMA1710 – 2700 MHz

Average Efficiency 67 % 61 %

Peak Gain 1.6 dBi max 3.5 dBI max

VSWR Match 2.5:1 max 2.5:1 max

Feed Point Impedance 50 ohms unbalanced

Polarization Linear

Power Handling 2 Watts CW

Radiation Pattern Omni-directional

9/5/2016 Proprietary and confidential. www.ethertronics.com

Cellular Vertical Wideband

LTE antenna

Band 704–960MHz / 1710–

2700MHz

Electrical Specifications

Typical Characteristics, on 50x120mm2 ground plane using

configuration 3

Dimensions 50.6x19.6x1.6mm

Mechanical MountingFR4 antenna vertical mount, with ground and

feed pads soldered to PCB

Weight 3.05g +/- 0.1g

Packaging 1,000 pieces per box

Mechanical Specifications

KEY BENEFITS

Quicker Time-to-Market By optimizing antenna size,

performance and emissions, customer and regulatory specifications are more easily met.

Greater Flexibility Ethertronics’ first-in-class IMD technology enables you to develop concept designs that are more advanced and that deliver superior performance in reception-critical applications.

RoHS Compliant Ethertronics’ antennas are fully compliant with the European RoHS Directive 2002/95/EC.

APPLICATIONS

• Notebook Computers • Access Points• Cellular enabled IoT• M2M, Medical Devices

Return Loss and Efficiency plots

Measured on a 50x120 mm2 ground plane using configuration 3

© 2016 Ethertronics Incorporated.tel +(1) 858.550.3820 | fax +(1) 858.550.3821

email: [email protected]

5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA

*All dimensions provided in this document are for informational purposes only.

Ethertronics’ Embedded LTE Antenna Specifications.Below are the typical performances.

DATASHEET | Part No. 1002436

High Band return loss in dB

Low Band efficiency in percent High Band efficiency in percent

PCB Tuning — 7 Configurations

For each new configuration, a 0 ohm resistance is soldered to create an additional connection between the parasitic and the pads.

Low Band return loss in dB






PCB Tuning Layout

High Band return loss in dB

Low Band efficiency in percent High Band efficiency in percent

Low Band return loss in dB

Antenna Radiation Patterns Typical Performances with Configuration 3






Mechanical Dimensions

All dimensions are in mm





Ethertronics’ Embedded LTE Antenna Specifications.Below are the typical performances.


product: vertical wideband lte antenna part no… · part no.1002436 lte vertical wideband embedded...

Documents