product selector guide low power adapter/charger products · linkswitch-cv – constant voltage...
TRANSCRIPT
2
Product Selector Guide
Low
Pw
r Ad
pt/C
hrg
Char
t 09
0617
5 W3 W0 W 8 W 9 W 10 W7 W 14 W 16 W 18 W 65 W20 W
SSR
PSR
85-265 VAC
InnoSwitch3-EP
InnoSwitch3-CE
InnoSwitch™3-CP
LinkSwitch-4
LinkSwitch-3
LinkSwitch-CV
LinkSwitch™-HP
PI-6016-061410
P PackagePDIP-8
D Package
PDIP-8CSO-8C
SO-8
PI-4890-061410
PI-3149-072406
PI-3149a-040516
E PackageeSIP-7CeSIP-7G
K PackageeSOP-R16B
PI-5029-032108
V PackageeDIP-12
C PackageInSOP-24D
PI-5845-082511
K PackageeSOP™-12
PI-6357-082511
PI-7893-031116
Package Design/Pin Layout – Improves Reliability• Wide package DRAIN – SOURCE creepage reduces probability of arcing• Important for high pollution degree environments and forced air cooling• Optimal pin arrangement allows compliance with safety agency adjacent pin short-circuit test• Packages below are RoHS compliant
PI-8415-082417
3
IC Product Tables
LinkSwitch-CV – Adapters up to 10.5 W
Product2
Continuous Output Power (W)
Continuous Output Power (W)
Adapter1 Adapter1
230 VAC ± 15% 85-265 VAC
LNK623P/D 6.5 5.0
LNK624P/D 7 5.5
LNK625P/D 8 6.5
LNK626P/D 10.5 8.5
Notes: 1. Minimum continuous power in a typical non-ventilated enclosed adapter measured at
+50 °C ambient. 2. Packages: P: DIP-8C, D: SO-8C.
LinkSwitch-3 – Charger/Adapters up to 10 W1,2,3,4
Product5
90-264 VAC
D (SO-8C) Package
Adapter (W)
LNK6404D / LNK6424D 3.5
LNK6405D / LNK6415D / LNK6425D 4.5
LNK6406D / LNK6416D /LNK6426D / LNK6436D / LNK6446D
5.5
LNK6407D / LNK6417D / LNK6427D 7.5
Product5
E (eSIP-7C) and K (eSOP-12B) Packages
Adapter (W)
LNK6407K / LNK6417K / LNK6427K 8.5
LNK6408K / LNK6418K / LNK6428K / LNK6448K 10
LNK6408E / LNK6418E /LNK6428E / LNK6448E 10
Notes: 1. Assumes minimum input DC voltage >90 VDC, KP ≥1 (Recommend KP ≥1.15 for
accurate CC regulation), η >78%, DMAX <55%.2. Output power capability is reduced if a lower input voltage is used.3. Minimum continuous power with adequate heat sink measured at 50 °C ambient with
device junction below 110 °C.4. Assumes bias winding is used to supply BYPASS pin.5. Package: D: SO-8C, E: eSIP-7C, K: eSOP-12B.
Additional Features:• Compensates for transformer inductance
tolerances• Compensates for input line voltage variations• Compensates for cable voltage drop• Compensates for external component tempera-
ture variations• Very accurate IC parameter tolerances using
proprietary trimming technology • Frequency jittering greatly reduces EMI filter cost• Even tolerances achievable with external resistor
selection/trimming• Programmable switching frequency up to 85 kHz
to reduce transformer size• Minimum operation frequency fixed to improve
transient load response
Additional Features:• 700 V internal MOSFET rating• Self-powered• ON/OFF control• Hysteretic over-temperature protection• Power limiting• Frequency jitter reduces EMI• EcoSmart™ low standby/no-load power consumption
4
IC Product Tables
LinkSwitch-HP – Adapters up to 25 W
Product2 Heat Sink85-265 VAC
Adapter (W)
LNK6xx3K/V PCB-W1 9
LNK6xx4K/V PCB-W1 11
LNK6xx5K/V PCB-W1 13
LNK6xx6K/V PCB-W1 15
LNK6xx7K/V PCB-W1 19
LNK6xx8K/V PCB-W1 21
LNK6xx9K/V PCB-W1 25
Notes: 1. PCB heat sink with wave soldering. 2. Packages: E: eSIP-7C, K: eSOP-12B, V: eDIP-12B.
LinkSwitch-4 – Charger/Adapter BJT Drivers up to 15 W
Product2,385-265 VAC
Adapter1 (W)
LNK40x2S 6.5
LNK40x3S 8
LNK40x3D 10
LNK40x4D 15
Notes: 1. Minimum continuous power in a typical non-ventilated enclosed adapter
measured at +50 °C ambient, device TJ ≤ 100 °C. 2. Cable compensation factor. x = 0 (no cable compensation),
x = 1 (3% cable compensation) x = 2 (6% cable compensation) 3. Package: D: SO-8 , S: SOT-23-6.
Additional Features:• Dynamic base drive technology provides flexibility in choice
of BJT transistor by dynamically optimizing BJT switching characteristics• Extends RBSOA of BJT• Dramatically reduces sensitivity to BJTgain
• Compensates for transformer inductance tolerances• Compensates for input line voltage variations• Compensates for cable voltage drop• Compensates for external component
temperature variations• Very accurate IC parameter tolerances
using proprietary trimming technology • Frequency up to 65 kHz to reduce transformer size• The minimum peak current is fixed to improve transient
load response
Additional Features:• EcoSmart – energy efficient
• Multi-mode control maximizes efficiency• No-load consumption below 30 mW at
230 VAC (LNK67xx)• >75% efficiency with 1 W input at 230 VAC• >50% efficiency with 0.1 W input at 230 VAC
• High design flexibility for low system cost• Dramatically simplifies power supply designs
• Eliminates optocoupler and all secondary control circuitry
• ±5% or better output voltage tolerance• 132 kHz operation reduces transformer and power
supply size• Accurate programmable current limit
• Compensation over line limits overload power• Frequency jittering reduces EMI filter cost
5
IC Product Tables
InnoSwitch3-CE – Best in Class Efficiency, No-Load, Fast Transient, Chargers up to 65 W
Product3
230 VAC ± 15% 85-265 VAC
Adapter1
(W)Open
Frame2 (W) Adapter1 Open Frame2
INN3162C 10 12 10 10
INN3163C 12 15 12 15
INN3164C 20 25 15 20
INN3165C 25 30 22 25
INN3166C 35 40 27 36
INN3167C 45 50 40 45
INN3168C 55 65 50 55
Notes: 1. Minimum continuous power in a typical non-ventilated enclosed typical size adapter
measured at 40 °C ambient. Max output power is dependent on the design. With condition that package temperature must be < = 125 °C.
2. Minimum peak power capability.3. Package: InSOP-24D.
InnoSwitch3-CP – Constant Power Profile for USB PD / QC Applications up to 65 W
Product2,3
230 VAC ±15% 85-265 VAC
Adapter1
(W)Open
Frame2 (W)Adapter1
(W)Open
Frame2 (W)
INN3264C/3274C 20 25 15 20
INN3265C/3275C 25 30 22 25
INN3266C/3276C 35 40 27 36
INN3277C 40 45 36 40
INN3267C 45 50 40 45
INN3268C 55 65 50 55
Notes: 1. Lowest maximum continuous power in a typical non-ventilated enclosed adapter
measured at 40 °C ambient. (package temperature < 125 °C).2. Minimum peak power capability.3. Package: InSOP-24D.
InnoSwitch3-EP – Excellent Multi-Output Cross Regulation for Open Frame Design up to 45 W
Product3
230 VAC ±15% 85-265 VAC
Peak orOpen Frame1,2 (W)
Peak orOpen Frame1,2 (W)
INN3672C 12 10
INN3673C 15 12
INN3674C 25 20
INN3675C 30 25
INN3676C 40 36
INN3677C 45 40
Notes: 1. Minimum continuous power in a typical non-ventilated enclosed typical size adapter measured at 40 °C ambient. Max output power is dependent on the design.
With condition that package temperature must be < 125 °C.2. Minimum peak power capability.3. Package: InSOP-24D.
Additional Features:• Up to 94% efficiency across full load range• Incorporates a multi-mode Quasi-Resonant (QR) / CCM
flyback controller, 650 V MOSFET, secondary-side sensing and synchronous rectification driver
• Integrated FluxLink™, HIPOT-isolated, feedback link• Exceptional CV/CC accuracy, independent of transformer
design or external components• Adjustable accurate output current sense using external
output sense resistor
Additional Features:• Up to 94% efficiency across full load range• Incorporates a Quasi-Resonant (QR) / CCM flyback
controller, 650 V MOSFET (INN326x) or 725 V MOSFET (INN327x), secondary-side sensing and synchronous rectification driver
• Integrated FluxLink, HIPOT-isolated, feedback link• Supports fast charge protocols such as USB PD/QC 4.0• Constant Power (CP) Profile minimizes charging time with
continuous adjustment of output current and voltage• Exceptional CV/CC/CP accuracy, independent of transformer
design or external components• External IS resistor allows custom CC programming• Instantaneous transient response with 0%-100%-0% load step
Additional Features:• Up to 94% efficiency across full load range• Incorporates a multi-mode Quasi-Resonant (QR) / CCM
flyback controller, 725 V MOSFET, secondary-side sensing and synchronous rectification driver
• Integrated FluxLink, HIPOT-isolated, feedback link• Exceptional CV accuracy, independent of external
components• Adjustable accurate output current sense using external
output sense resistor• Excellent multi-output cross regulation with weighted SSR
feedback and synch FETs
6
Design Examples
LinkSwitch-CV – Constant Voltage Adapter (RDR-201)6 W, 5 V, 1.2 A OUTPUT, 90 – 265 VAC INPUT, FLYBACK POWER SUPPLY
PI-5246-102208
91
2 6
5
3
T1EE16
NC
C31 nF1 kV
C26.8 µF400 V
C16.8 µF400 V
C41 µF25 V
C8470 µF
10V
C71000 µF
16 V
L23.3 µH
L11 mH
C51 µF50V
C61 nF50V
D5FR107
D11N4007
D21N4007
D31N4007
D41N4007
D61N4148
D71N5822
90 - 265VAC
5 V, 1.2 A
D
S
FB
BP
R1270 kΩ
R2330 Ω
R328.7 kΩ
1%
R44.42 kΩ
1%
RF110 Ω2 W
R58.2 kΩ1/8 W
R8820 Ω
R718 Ω
R612 Ω
LinkSwitch-CVU1
LNK625PG
LinkSwitch-3 – Constant Voltage, Constant Current DOE v6 Compliant USB Charger5 W, 5 V, 1 A OUTPUT, 90 – 265 VAC INPUT, FLYBACK USB POWER SUPPLY
PI-7536-030315
D
S
FB
BP
R2390 kΩ1/8 W
R810 Ω
1/10 W
R92.2 kΩ1/8 W
R1330 Ω1/8 W
R430 kΩ1%
1/10 W
R53.3 Ω
1/10 W
D2RS1DL
R62 kΩ
1/10 W
C132.2 nF50 V
R38.2 kΩ
1%1/10 W
D1S1ML
D3SCD345PH
T1EE13
4 6
7
3
1
5
C8560 µF6.3 V
C92.2 nF50 V
C7470 µF6.3 V
C14.7 µF400 V
C24.7 µF400 V
C61 µF16 V
C10680 pF100 V
C41 µF16 V
L11 mH
L210 µH
C111 nF250 V
C31 nF250 V
U1LNK6426D
LinkSwitch-3
BR1MBC10M
RF110 Ω1 W
90 - 265VAC
L N
5 V, 1 A
RTN
7
Design Examples
LinkSwitch-3 – Constant Voltage, Constant Current USB Charger10 W, 5 V, 2 A OUTPUT, 90 – 265 VAC INPUT, FLYBACK USB POWER SUPPLY
PI-7209-020515
D
S
FB
BP
R11200 kΩ
R22.55 kΩ
1%
R3150 Ω
R644.2 kΩ
1%
R52.4 Ω
D3RS1ML
R82.37 kΩ
1%
R110 Ω
R104.7 kΩ
R710 kΩ1%
D2S1ML
D1SBR1045SP5-13
T1EPC17
5 FL1
FL2
4
3
6
C4680 µF10 V
C51 nF50 V
C3680 µF10 V
C110 µF400 V
C215 µF400 V
C71 µF50 V
C810 µF25 V
L21 mH
L1Ferrite Bead
(3.5 × 7.6 mm)
L3Ferrite Bead
(3.5 × 7.6 mm)
C6470 pF250 V
U1LNK6448K
LinkSwitch-3
BR1B10S-G1000 V
RT110 Ω
F11 A tO
90 - 265VAC
LTP1
NTP2
5 V, 2 A
J1-1
RTN
J1-4
8
Design Examples
LinkSwitch-4 – Constant Voltage, Constant Current CoC v5 and DOE v6 Compliant USB Smart Phone Charger12 W, 12 V, 1 A OUTPUT, 85 – 265 VAC INPUT, FLYBACK USB POWER SUPPLY
PI-7488-030515
LinkSwitch-4U1
GND
BD
ED
CS
VCC
SBD
FB
R1315 Ω
R11630 Ω1%
4 FL+
2FL-
6
8
D6BAV21WSQ1
13005T0252
R108.2 kΩ
1%
R122.4 kΩ
1%
R203.3 Ω
R1470 kΩ
R9100 Ω
R2220 Ω
R80.68 Ω
1%
R70.68 Ω
1%
NTC15 Ω
FR12 A
250 V
85 - 265VAC
12 V, 1 A
RTN
L
N
DB1DB106
R6220 Ω
D10
D7VFY10100
R410 MΩ
R310 MΩ
L11 mH
L3
L2
C7470 pF
CY1100 pF250 V
C8220 µF
C42.2 µF25 V
C115 µF400 V
C215 µF400 V
C52.2 µF25 V
R1933 kΩ
C3470 pF630 V
T1RM6
LinkSwitch-4 – Constant Voltage, Constant Current CoC v5 and DOE v6 Compliant USB Smart Phone Charger (RDR-462)10 W, 5 V, 2 A OUTPUT, 85 – 265 VAC INPUT, FLYBACK USB POWER SUPPLY
PI-7469 -030515
LinkSwitch-4U1
LNK4023D
GND
BD
ED
CS
VCC
SBD
FB
R104.7 Ω
1/10 W
R59.1 kΩ
1%1/10 W
3 7
5 6
2
1
D21N4148
Q1GU13005
R13620 Ω1/10 W
R63 kΩ1%
1/10 W
R151 Ω
1/8 W
R3470 kΩ
R12300 Ω1/8 W
R16270 Ω1/8 W
R80.91 Ω
1%1/3 W
R70.82 Ω
1%1/3 W
RT15 Ω
F12 A
250 V
85 - 265VAC
5 V, 2 A
J3-1
RTN
J3-4
L
J1
N
J2
BR1ABS8600 V
R9270 Ω1/10 W
D11N4007
D310U45
R427 MΩ
R227 MΩR14
N.A.
L2Bead
L1470 µH
C61000 pF100 V
C9100 pF
250 VACC7
560 µF6.3 V
C8560 µF6.3 V
C42.2 µF25 V
C112 µF400 V
C212 µF400 V
C52.2 µF25 V
R115.1 kΩ1/10 W
C3330 pF500 V
T1
9
Design Examples
LinkSwitch-HP – Constant Voltage, Network Adapter18 W, 12 V, 1.5 A OUTPUT, 90 – 265 VAC INPUT, FLYBACK POWER SUPPLY
PI-7538-030415
CY1220 pF
250 VAC
C222 µF400 V
L120 mH
T1EE16
D51N4007
C7100 pF50 V
C64.7 µF50 V
C31 nF1 kV
C41000 µF
16 V
C101 nF250 V
D7, D8SB3100
D6RS1B
C522 µF25 V
4
6
75
3
2 1
12 V, 1.5 A
J3
RTN
J4
C115 µF400 V LinkSwitch-HP
D
S
FB
BP
CPPD
CONTROL
U1LNK6775K
C9680 µF16 V
R137.5 kΩ
1%
R415 kΩ1%
R3150 kΩ
1%
R1010 Ω
C11470 pF250 V
R55.6 kΩ
R910 Ω
R6100 Ω
R7360 kΩ R8
10 kΩ
R28.2 kΩ
1%
C8100 nF50 V
D11N4007
D21N4007
D31N4007
D41N4007
F13 A
RV1300 V
90 - 265VAC
L
J2
N
J1
LinkSwitch-HP – High Efficiency Adapter with Synchronous Rectification (DER-416)24 W, 12 V, 2 A OUTPUT, 90 – 265 VAC INPUT, FLYBACK ADAPTER POWER SUPPLY
PI-7275-071717
C182.2 nF
250 VAC
VR1BZG03C130TR
130 V
L410 mH
BR2DF206ST-G
600 V
C2633 µF400 V
D2BAV21WS-
7-F
T1RM8D1
US1K-13-F
C610 µF25 V
C8100 pF50 V
C2310 pF50 VC20
4.7 nF50 V
C310 nF630 V
C12470 µF16 V
C13680 pF100 V
D3V12P10-M3/86A
C5470 nF50 V
7
FL2
FL19
6 8
RV1275 VAC
R293.3 MΩ
R303.3 MΩ
F12 A
C25220 nF450 VC14
150 nF250 VAC
C233 µF400 V
90 - 265VAC
12 V, 2 A
TP3
RTN
TP4
TP2 TP1
LinkSwitch-HP
D
S
FB
BP
CPPD
CONTROLU3
LNK6775E
U4UCC24610DR
C2810 µF25 V
C241 µF50 V
C2910 µF25 V
C3010 µF25 V
L5100 µH
R1954.9 kΩ
1%
R8124 kΩ
1%1/8 W
R7100 kΩ1/8 W
R94.3 kΩ1/8 W
R3910 Ω
R331 Ω1%
R32261 kΩ
1%1/16 W
R3147 kΩ1/10 W
R1210 kΩ1/10 W
Q2MMBT3904
VR2DZ2S056M0L
5.6 V
VR3BZX79-C75
75 V
Q1SIR882ADP
R382 Ω
1/10 W
R1320 Ω1%
R2100 Ω
R320 kΩ
R34OPEN
R209.09 kΩ
1%1/8 W
C7100 nF25 V
VD
GA
TE
VS
TON
EN/O
FF
GN
DV
CC
10
Design Examples
InnoSwitch3-CE – Constant Voltage, Constant Current Adapter (DER-610)10 W, 5 V, 2 A OUTPUT, 85 – 265 VAC INPUT, FLYBACK USB POWER SUPPLY
PI-8384-090717
C28.2 µF400 V
C28.2 µF400 V
D7BAV19WS
D1RS2MA-13-F
D3RS2MA-13-F
D2RS2MA-13-F
D4RS2MA-13-F
D8BAV19WS
C422 µF25 V
C54.7 µF50 V
L2100 µH
C8100 pF
250 VAC
L14.7 µH
C7330 pF50 V
C10560 µF6.3 V
C31 nF250 V
C121 µF50 V
C62.2 µF25 V
2
1
T1EE1621
6
5
5 V, 2 A
TP3J3-1
J1
J2
85 - 265VAC
RTN
TP4J3-4
R121.50 MΩ
1%
R52.00 MΩ
1%
R647 Ω
1/10 W
D6DFLR1200-7
R326.7 kΩ
1%1/16 W
RT110 Ω
3
4
D V
S IS
GN
D
SR VO
FWD
FB
InnoSwitch3-CE
CONTROL
R720 Ω1/8 W
C91.5 nF200 V
R130.015 Ω
1%, 1/2 W
Q1
SI73
70D
P-T1
-GE3
R8100 kΩ
1%1/16 W
R934 kΩ1%
1/16 W
R1200 kΩ1/8 W
R230 Ω1/8 W
D5DFLR1600-7
BPP
BP
SU1
INN3162C-H102
F13.15 A
tO
InnoSwitch3-CP – USB PD Mobile Phone Charger (DER-536)45 W, 5 V, 3 A, and 9 V, 3 A and 15 V, 3 A OUTPUTS, 85 – 265 VAC INPUT, FLYBACK USB PD POWER SUPPLY
PI-8409-082517
FL1
FL4
FL3
FL6
T1EQ27
FL5
FL2
5 V, 3 A9 V, 3 A
15 V, 3 A
VOUT
RTNJ1 J2
D
S IS
GN
D
SR/P
VO
FWD
FB
InnoSwitch3-CPBPP
BP
S
U1INN3268C-H208
CYPD2134U2
VDDD
EPAD
GPIO6
CC1
CC2
GPIO5
9 V
12 V
15 V
GPIO10
C42.2 nF630 V
C154.7 µF50 V
C1422 µF50 V
C132.2 µF25 V
C102.2 µF25 V
C11330 pF50 V
C6390 µF20 V
C7390 µF20 V
C56.8 nF50 V
C20330 pF16 V
C16100 µF50 V
C171 µF35 V
C910 µF35 V
C19330 pF16 V
C181 µF16 V
C239 µF400 V
L134 mH
L2600 µH
C12100 nF
305 VAC
1 3
2 4
2 4
1 3
C339 µF400 V
VR1
MM
SZ52
59BT
1G
Q7
MM
BTA0
6LT1
G
VR2DZ2S100M0L
10 V
D2
BAV2
1WS-
7-F
D3
SM40
03PL
-TP
R2150 kΩ
1%R1
2.00 MΩ1%
R31.8 MΩ
1%
R520 Ω1%
D1DFLR1800-7
R810 Ω1%
C81 nF200 V
C11 nF
250 VAC
R151.5 MΩ
1%
R204.02 kΩ
1%
R14402 Ω1%
R4100 kΩ
1%
R649.9 kΩ
1%1/10 W
R91.00 kΩ
1%1/8 W
R104.02 kΩ
1%
Q3
SIR8
82AD
P-T1
-GE3
Q1BSC030P03NS3 G
Q2BSC030P03NS3 G
Q5
RJU
003N
03T1
06
Q4
RJU
003N
03T1
06
Q6
RU1J
002Y
NTC
L
R1347 Ω
1/10 W
BR1TBS20J-TP
600 V
BR2TBS20J-TP
600 V
V
CONTROL
VCCD
R210.01 Ω
1%
R1631.6 kΩ
1%
R23100 kΩ
1%
R1110 Ω1%
R12100 kΩ
1%
R2410 kΩ1%
R1731.6 kΩ
1%
XRES
RT15 Ω
F12 A
85 - 265VAC
tO
R1818.0 kΩ
1%
R1912.7 kΩ
1%
R7200 Ω1%
R254.7 KΩ
11
Design Examples
InnoSwitch3-EP – Dual Output Industrial Power Supply (RDK-611)10 W, 5 V, 0.3 A and 12 V, 0.7 A OUTPUTS, 90 – 265 VAC INPUT, FLYBACK, OPEN FRAME, INDUSTRIAL POWER SUPPLY
PI-8374-090617
C41000 pF630 V
C210 µF400 V
C310 µF400 V
C522 µF50 V
C64.7 µF16 V
L1330 µH
C10470 pF
250 VAC
C8330 pF50 V
C18560 µF6.3 V
C122.2 µF25 V
VR2SMAZ8V2-13-F
8.2 V
C19680 µF16 V
C72.2 µF25 V
C142.2 µF25 V
L210 µH
L310 µH
2
1
FL1
FL2
EE1621
NC
6
5
12 V, 0.7 A
5 V, 0.3 A
12 V
RTN
5 V
RTN
R8200 kΩ
R2268 Ω
RT110 Ω
R947 Ω
1/10 W
D1DFLR1600-7
600 V
D7DFLR1200-7
D3BAV21WS-7-F
VR1MMSZ5231B-7-F
R2636 Ω
1/10 WR66.2 kΩ1/10 W
4
3
D V
S IS
GN
D
SR VO
FWD
FB
InnoSwitch3-EP
CONTROL
R2462 Ω1/8 W
C221 nF200 V
R2530 Ω1/8 W
C211 nF200 V
R120.2 Ω1%
R1333.2 kΩ
1%1/16 W
R16133 kΩ
1%1/16 W
R30100 Ω1/10 W
C242.2 nF50 V
R29100 Ω1/10 W
C232.2 nF50 V
Q1AO6420
Q2AO4486
R271.2 MΩ
1%1/16 W
BPP
BP
S
U1INN3672C-H602
BR1DF08S800 V
F11 A
90 - 265VAC
L N
tO
R32 MΩ1%
R41.8 MΩ
1%
Worldwide Sales Support Locations
World Headquarters5245 Hellyer AvenueSan Jose, CA 95138, USAMain: +1 408-414-9200Customer Service: Worldwide: +1-65-635-64480Americas: +1-408-414-9621Email: [email protected] [email protected]
AMERICAS WEST5245 Hellyer Avenue San Jose, CA 95138 USA Tel: +1-408-414-8778Fax: +1-408-574-3760Email: [email protected]
GERMANY (AC-DC/LED Sales)Lindwurmstrasse 114D-80337 MünchenGermany Tel: +49-89-5527-39100Fax: +49-89-1228-5374Email: [email protected]
INDIA (Mumbai)Power Integrations India Private LimitedUnit: 106-107, Sagar Tech Plaza-BSakinaka, Andheri Kurla RoadMumbai - 400072, Maharashtra, IndiaTel 1: +91-22-40033700Tel 2: +91-22-40033600Email: [email protected]
JAPANKosei Dai-3 Bldg.2-12-11, Shin-Yokohama, Kohoku-ku,Yokohama-shi, Kanagawa Japan 222-0033Tel: +81-45-471-1021 Fax: +81-45-471-3717Email: [email protected]
TAIWAN5F, No. 318, Nei Hu. Rd., Sec. 1Nei Hu Dist.Taipei, Taiwan 114, R.O.C.Tel: +886-2-2659-4570Fax: +886-2-2659-4550Email: [email protected]
On the Webwww.power.com
AMERICAS EAST7360 McGinnis Ferry RoadSuite 225Suwanee, GA 30024Tel: +1-678-957-0724Fax: +1-678-957-0784Email: [email protected]
CHINA (Shanghai)Room 1601-1603, Charity PlazaNo. 88 North Caoxi RoadShanghai, PRC 200030Tel: +86-021-6354 6323Fax: +86-021-6354 6325Email: [email protected]
GERMANY (IGBT Driver Sales)HellwegForum 159469 EnseGermany Tel: +49-2938-64-39990Email: [email protected]
INDIA (New Delhi)#45, Top FloorOkhla Industrial Area, Phase – IIINew Delhi, IndiaPin – 110020 Tel: +91-11-4055-2351/53Email: [email protected]
KOREARM602, 6FL, 22Teheran-ro 87-gil, Gangnam-guSeoul, 06164, KoreaTel: + 82-2-2016-6610 Fax: + 82-2-2016-6630Email: [email protected]
UNITED KINGDOMBuilding 5, Suite 21The Westbrook CentreMilton RoadCambridgeCB4 1YGTel: +44 (0)7823 557484Email: [email protected]
AMERICAS CENTRAL3100 Dundee Road, Suite 204Northbrook, IL 60062Tel: +1-847-721-6293Email: [email protected]
CHINA (Shenzhen)17/F, Hivac Building, No 2Keji South 8th Road, Nanshan DistrictShenzhen, ChinaZip Code: 518057Tel: +86-755-8672-8689 Fax: +86-755-8672-8690Email: [email protected]
ITALYVia Milanese 2020099 Sesto San Giovanni (MI)ItalyTel: +39 02 455 08708Email: [email protected]
INDIA (Bangalore)# 1, 14th Main Road VasanthanagarBangalore 560052 IndiaTel 1: +91-80-4113-8020Tel 2: +91-80-4113-8028Fax: +91-80-4113-8023Email: [email protected]
SINGAPORE51 Newton Road#20-01/03 Goldhill PlazaSingapore, 308900Tel: +65-6358-2160 Cust. Svc: +65-6356-4480Fax: +65-6358-2015Email: [email protected]
©2017 Power Integrations. Power Integrations, TOPSwitch, TinySwitch, LinkSwitch, LYTSwitch, InnoSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS, HiperLCS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, FluxLink, StakFET, PI Expert and PI FACTS and the Power Integrations logo are trademarks or registered trademarks of Power Integrations, Inc. All rights reserved.