product catalogue · sab elteknik has been appointed sicame group's exclusive distributor in...

1SAB ELTEKNIK AB • PHONE +46 651-760 790 • [email protected] • WWW.SABP.SE

Equipment, over- head line and cable

Products that provide added value for

construction within electric power, industry

and telecommunications.

2016P R O D U C T C A T A L O G U E

2 SAB ELTEKNIK AB • PHONE +46 651-760 790 • [email protected] • WWW.SABP.SE

Pole accessories, earthing Down lead mounts 4Repair kit 4Earthing rod 4Conduit coupling 4Connection clamp 4

Line accessories BLL/BLX Penetrating clamp TTD 5Branch terminal TTDC 5Shunt connector TNDC-FABI 5Shunt connector TNDC-FABO 5

AMS clampsAMS clamps 6AMS clamp, type MC-415-1 6AMS clamp, type MC-414 6

Medium voltage surge arrester 12-24 kV. Medium voltage surge arrester 7Surge arrester mount 7 Cable joints and terminations Cable joint single core cable 12-24 kV 8Cable joint three core cable 12-24 kV 8Termination outdoor single core cable 12-24 kV 9Termination indoor single core cable 12-24 kV 9Termination outdoor three core cable 12-24 kV 9Termination indoor three core cable 12-24 kV 9

Clamps ALUS, connectors Branch terminal TTD 10Insulated connector MJPT 10

Cable marking Cable marker ”Axvalla Pinnen” 11

Transition slacks Repair slack P230 11 Joints and plugs Joints, divided cable duct 12Divided clamping sleeve 12Tool for assembling divided cable-ducts 12Comfit coupling 13Comfit pipe plugs with loop 13

Contents


Products that solve tangible problemsOn the following pages you will find equipment that stands out. Products that provide additional alternatives to already existing equipment, SAB Elteknik has left to one side and instead we offer exclusively those products that provide additional value.

The penetrating branch terminals, TTD, with turbo plates that work as a third hand and facilitates installation, is one clear example of what we require of a product to be included in our range. Another example is the surge arrester. They have a hermetical construction in their core, making them mechanical-ly strong and completely waterproof, which helps eliminate failures.

Our range spans everything from Telecom grids to power transmission. In case of larger project deliveries, our international partners – Sicame, Meca-traction, SBI and others – enable us to offer more products than the ones you find here.. Feel free to contact us and we will do our best to help you.


Personal safety equipmentPole accessories, earthing

Repair kitFor repairing damaged poles with hooked pin insulator.Used when the hooked pin insulator has come off the pole. The plate is placed over the damage so that the casing ends up where the hook was located. The pin bolts are tightened and the hook is inserted into the casing and locked with the bolts.

Laurel consists of one plate and two shackles, suitable for minor pole damage

Hardy consists of two plates and four pin bolts, used for major damage to poles

SAB no E no Model Weight, kg

81520500 E0623964 Repair kit Laurel 2.70 kg

81520510 E0623966 Repair kit Hardy 2.40 kg

Earthing rodFor deep earthing, measurements 5/8". The earthing rod is manufactured from high-grade steel covered with a layer of copper, which is insoluble with he steel. Several rods can be joined to the desired length.

SAB no E no Measurements Weight, kg

81220000 E0632006 5/8“ x 1.5 m 2.0 kg

Conduit coupling5/8” conduit coupling in bronze for joining earthing rods.


81220400 E0667285 5/8“ 0.1 kg

Connecting clamp5/8” connecting clamp for earthing rod, 25-50 mm², with stainless bolt.


81220600 E0632007 5/8“

Downlead mounts AVACOA smart downlead for repairing and constructing ALUS. The mount fits:• ALUS 1x25 – 4x25 mm²• EKKJ 3x6+6 – N1XVA 4x95 mm²AVACO consists of two mounts, the top one is equipped with a pressure spring for equalization of temperature variations. Always use a spacing rod in the middle, long poles need two. Read the instructions before use.


81530000 Downlead kit AVACO 0.4

81202000 E0632725 Spacing rod SC93/10P 0.1

81531000 Console 0.2

81531200 Console with slit (for earthing clamp) 0.2


Line accessories BLL/BLX

Penetrating clamp TTD from SicameIntended for arc flash kit.Penetrating clamp, waterproof 6kV/1 hr in water.

SAB no E no Model Main conductor Branching Weight, kg

85102500 E0654756 TTD301 62-99 mm² Arc horn 0.08 kg

85102600 E0654765 TTD431 157-241 mm² Arc horn 0.10 kg

Branch terminal TTDC from SicamePenetrating clamp, waterproof 6kV/1 hr in water.

BLL area, mm² insulator Diameter, mm thickness, Torque Max. SAB no E no Model Conductor Delimit. mm Conductor Delimit. Bolt Nm Current (A)

85121200 E0654758 TTDC28401 FA 50-120 50-120 1.5-3.0 19.9 19.9 2 x M8 18 437

85121600 TTDC28451 FA 157-241 62-157 1.5-3.0 26.1 23.0 2 x M10 25 530

85121800 E0654759 TTDC28501 FA 95-240 95-240 1.5-3.0 26.1 26.1 2 x M10 37 679

85106010 E0654757 TTDC50501 FT 52 kW

99-241 99-241 4.8-5.5 31.1 31.1 2 x M10 37 679

Shunt connector TNDC-FABI from SicamePenetrating clamp with ring for earthing, shunting and diverting. with AMS clamps.

Shunt connector TNDC-FABO from SicamePenetrating clamps with ringbrace for earthing, shunting and diverting. with AMS clamps.

SAB no E no Model Area Insulator thickness

85127000 E0654720 TNDC28401FABI95A for BLL 50-120 mm2 with Alu brace 50-120 mm² 1.5-3 mm

85127200 E0654721 TNDC28431FABI95A for BLL 95-240 mm2 with Alu brace 95-240 mm² 1.5-3 mm

SAB no E no Model Area Insulator thickness

85127300 E0654722 TNDC28291FABO for BLL 50-240, with alu brace 50-240 mm² 1.5-3 mm


AMS clamps

AMS clamps • AMS clamp made from material with high resistance to corrosion.• The construction of the clamp facilitates installation and provides a secure connection.• The clamp has a looped screw with a torque of 18 Nm. The screw has a integrated safety step of 30Nm that ensures the clamp cannot be over torqued. If the loop shears off, you can loosen the clamp with the hexagonal head.

60MC4151 E0654736 MC-415-1 Al 12-490 mm² Al/Cu 4-25 mm 0.70 kg

SAB no E no Model Main area Branching area Weight, kg

AMS clamps, type MC-414 AMS clamp made from material with high resistance to corrosion, intended for temporary branching or shunting, also for permanent use.The clamp for the main conductor has a looped screw that fits the Grip-All rods.The clamp is spring-loaded and fastens securely during assembly.18 Nm torque on the ring and 33 Nm on the branch terminal.

63MC414 E0654737 MC-414 Al 12-240 mm² Al/Cu 4-20 mm 0.80 kg


63310200 E0654731 AMS clamp CD74-AM06

Alu 22-150mm² Alu 16-95mm² 0.3 kg

63310600 E0654764 AMS clamp CD74-AG06

Alu 54-325mm² Alu 22-240mm² 0.3 kg

63310800 E0654733 AMS clamp CD74-CPP86

Cu 12-75mm² Cu 16-50 Alu 16-60mm²

0.3 kg

63311000 E0654734 AMS clamp CD74-CM86

Cu 16-95mm² Cu 16-95mm² 0.5 kg

63311200 E0654735 AMS clamp CD74-CGP86

Cu 25-120mm² Cu 16-120, Alu 16-200mm²

0.6 kg

63311000 E0654734 CD74CM86 Cu 16-95 mm² Cu 16-95 mm² 0.47 kg

63311200 E0654735 CD74CGP86 Cu 25-120 mm² Cu 16-120 mm²Alu 16-200 mm²

0.80 kg


AMS clamp, type MC-415-1AMS clamp made from material with high resistance to corrosion, intended for permanent or temporary branching or shunting. The construction of the clamp facilitates installation and provides a secure connection. The clamp for the main conductor has a looped screw that fits the Grip-All rods.The clamp is designed to facilitate assembly by locking after 1-2 turns of tightening. Thanks to this feature, the clamp does not come loose or twist off during assembly.18 Nm torque on the ring and 33 Nm on the branch terminal.


Medium voltage surge arrester 12-24 kV.

Surge arrester mount Complete mount with earthing clamp made from aluminium.The mount is designed to ensure that the terminal phase lengths are the same.Consists of two loose plates, earthing clamp, hexagonal-head wood screw and is assembled by the centre arrester. This means the mount needs very little space during storage and trans-port.

14101900 E0634400 0.80 kg

SAB no E no Weight, kg

AZBD 091 8.4 9 30.3 34.8 41.4 37.2 26 26.9

AZBD 151 12.7 15 39.6 45.4 54 48.6 34 35.1

AZBD 181 15.3 18 45.4 52.1 61.9 55.7 39 40.3

AZBD 271 22 27 70 80.3 95.4 85.9 60.1 64.3

Designation Voltage Rated Discharge voltage (kV) class voltage 8/20µs 1/20µs 30/60µs Uc (kV) Ur (kV) 5kA 10kA 20kA 10kA 125A 500A

AZBD 091 164 381 110 1.5

AZBD 151 186 510 110 1.8

AZBD 181 200 525 110 2.1

AZBD 271 258 745 110 2.7

Designation Height (mm) Leakage current length (mm) Diameter collar (mm) Weight (kg)

88AZBD109M12 E0634130 AZBD 091

88AZBD115M12 E0634093 AZBD 151

88AZBD118M12 E0634131 AZBD 181

88AZBD127M12 E0634094 AZBD 271

Product code E number Designation

Line discharge class 1

Nominal dischargecurrent

10kA

High current impulse, 4/10µs

100kA

Low current impulse, 2000µs

275A

UTOV/Uc 10s 1.34

Energy absorptioncapacity

3kJ/kV Uc

Max. bending mo-ment

350Nm

Max. tensile strength 15kN

Max. torque 70Nm

General dataElectrical data

Physical data

Surge arrester 12 and 24 kV with fault indicator The AZBD zinc oxide arresters from Dervasil are supplied with a fault indicator. Each end has M12 stainless stud bolts, washers and nuts. The silicone body is moulded directly onto the zinc oxide block, ensuring a tight and safe construction.

The fault indicator is a silicone strip that wraps around the arrester and is visible at a distance. In case of a fault of at least 150A for 1 second, the strip breaks and falls to the ground.

A missing strip indicates a failed arrester.


Medium Voltage Cable joints and terminations 12-24kV

Halved inventory costs and easier useSAB Elteknik has been appointed Sicame Group's exclusive distributor in Sweden. No other supplier offers Sicame's internationally recognised cable joints and termination.

For Swedish conditionsThe Swedish market has particular demands, for example, three-wire dominates the market. After long and careful testing a range of cable joints and terminations is being launched that builds on the latest heat shrink technology. The products are an equally smart choice from the user's perspective as from a financial perspective.

How to halve your costsA single product can handle both 12 and 24 kV. You do not have to stock both, which halves inventory and inventory costs.

Faster installation and a safer end productThere are fewer components, which reduces the number of installation steps making it harder to make mistakes. You save time during the installation and get an end product that provides greater safety and has a longer life.

SAB no E no Designation

83160000 E0702200 25-95 mm2 12 & 24 kV

83160100 E0702212 95-240 mm2 12 & 24 kV

83160600 E0702348 TT-sats 1-ledare 25-240 mm2 12 & 24kV

Cable joint single-core 12-24 kV Heat-shrink joint for plastic-insulated single-core cable. A single joint can handle both 12 and 24 kV. Unique triple-extruded tube that, in combination with the field control coating over the joint sleeve, makes for an easy installation. Supplied complete for one phase with screw-on joint sleeves. The joint can be insulation tested.


83160200 E0702213 25-95 mm2 12 & 24 kV

83160400 E0702172 TT-sats 25-95 mm2 12 & 24kV 125/30

83160300 E0702214 95-240 mm2 12 & 24 kV

83160500 E0702347 TT-sats 95-240 mm2 12 & 24kV 164/42

Cable joint three-core 12-24 kVHeat-shrink joint for plastic-insulated three-core cable. A single joint handles both 12 and 24 kV. Unique triple-extruded tube that, in combination with the field control coating over the joint sleeve, makes for an easy installation. Supplied complete with screw-on joint sleeves. The joint can be insulation tested.

Joint• A single joint handles 12 kV as well as 24 kV.• You do not have to stock both 12 kV and 24 kV = halved inventory = halved inventory costs.• Two sizes: 25-95 mm2 and 95-240 mm2. • Field control coating folded around the screw joint sleeve instead of winding mastic strips.

• Unique triple-extruded tube. • Reduced risk of air pockets between the tubes.• Fewer components to install = reduced installation time.• Fewer components = reduced risk of forgetting to install components in the joint.• Clear indication when the pipe is shrunk.

①

②

③

④

⑤

⑥


Medium Voltage Cable joints and terminations 12-24kV Medium Voltage Cable joints and terminations 12-24kV

Terminations three-core indoor 12-24 kV


83161400 E0702219 25-95 mm2 12 kV Outdoor

83161500 E0702220 95-240 mm2 12 kV Outdoor

83161600 E0702232 25-95 mm2 24 kV Outdoor

83161700 E0702233 95-240 mm2 24 kV Outdoor

Termination single-core outdoor 12-24 kVHeat-shrink termination for plastic-insulated three-core cable. Separate anti-tracking insulation tube and field control coating. Supplied with a complete set of 3 phases with cable shoes.


83162000 E0702234 25-95 mm2 12-24 kV Indoor

83162100 E0702235 95-240 mm2 12-24 kV Indoor

Termination single-core indoor 12-24 kV


83162200 E0702236 25-95 mm2 12-24 kV Outdoor

83162300 E0702237 95-240 mm2 12-24 kV Outdoor

Termination three-core outdoor 12-24 kV Heat-shrink terminal for plastic-insulated, reinforced three-core cable. A single terminal handles both 12 and 24 kV. Separate anti-tracking insulation tube and and field control coating. Supplied with a complete set of 3 phases with cable shoes.


83161000 E0702215 25-95 mm2 12 kV Indoor

83161100 E0702216 95-240 mm2 12 kV Indoor

83161200 E0702217 25-95 mm2 24 kV Indoor

83161300 E0702218 95-240 mm2 24 kV Indoor

TerminationsTerminations for single and three-wire, indoor and outdoor.• Reinforced design with conducting branching sleeve and tube, three-core. • Field control coating.• Red anti-tracking insulation tube and collars.• Screw cable shoes.• Three-core terminations handle 12 kV as well as 24 kV• You do not have to stock both 12 kV and 24 kV = halved inventory Three-core terminals = halved inventory costs.


Clamps ALUS, connectors

Branch terminal TTDSICAMEX. Approved for 6kV/h in water. Built in moment in head – a regular ring spanner can be used both on bolt and as counterstay.Used for both Al and Cu leads.To facilitate and provide safe assembly, the clamp is equipped with a tin-plate that holds the branch open while the clamp is attached to the main conductor, ”the third hand”. Approved for ALUS-D.

Main conductor Slack SAB no E no Type Type Area, mm² Area, mm² Weight, kg

85101900 TTD041 Al/Cu 6-35 1.5-6 0.08 kg

85102000 E0654750 TTD051 Al/Cu 25-95 1.5-6 0.08 kg

85102050 E0654751 TTD121 Al/Cu 25-95 2.5-25 0.12 kg

85102200 E0654754 TTD231 Al/Cu 25-95 10-50 0.17 kg

85102400 E0654753 TTD201 Al/Cu 25-95 25-95 0.16 kg

Insulated connector MJPTSICAMECrimping is done directly on the insulation. 25-25, 50-50 and 95-95 are tensile.The sleeves can also be used for ALUS – Cable transitions.We offer an extensive range of transitions between different diameters.

Crimped with HVD51 or ED52 (See the section on hand tools).

83202000 E0895030 MJPT25/25 Orange/Orange E173 25 – 25

83202400 MJPT35/35 Red/Red E173 35 - 35

83202600 E0895036 MJPT50/10 Yellow/Green E173 50 – 10

83203000 E0895040 MJPT50/25 Yellow/Orange E173 50 – 25

83203400 E0895044 MJPT50/50 Yellow/Yellow E173 50 – 50

83203600 MJPT70/70 White/White E173 70 - 70

83203800 E0895048 MJPT95/95 Grey/Grey E215 95 – 95

83204000 E0895050 MJPT95/50 Yellow/Grey E173 95 - 50

SAB no E no Type Colour Crimping die Area, mm²


Cable marking, transition slacks

Cable marker ”Axvalla Pinnen”Cable marker that can collapses when run over, made from special plastic.Resistant to UV light and easy to install using bottom plates.

73173000 E0668290 Pole with a sign saying ”High-tension current”

0.40 kg

73173100 Pole sign ”OPTO” 0.40 kg

SAB no E no Description Weight, kg


Joints and plugs

Joints, divided cable ductsTwo divided PVC cable ducts with lengthwise lock for joining sub-ducts with cable.Standard length is one metre, sections up to two metres in length can be supplied.

SAB no E no Designation Measurements Weight, kg57052032 KHR – 32 For 32 mm tube 0.64 kg

57052042 KHR – 40 For 40 mm tube 0.92 kg

57052052 KHR – 50 For 50 mm tube 1.20 kg

Divided clamping sleeveDivided clamping sleeve for securing the ducts for pressure.

SAB no E no Designation Measurements Weight, kg57052038 KHM - 32 32mm 0.27 kg

57052048 KHR – 40 40mm 0.29 kg

57052058 KHM - 50 50mm 0.32 kg

Tool for assembling divided cable-ductsTool for simple joining and locking divided cable-ducts

SAB no E no Designation Measurements Weight, kg57052030 MGK - 32 32mm 0.41 kg

57052040 MGK - 40 40mm 0.44 kg

57052050 MGK - 50 50mm 0.47 kg


Joints and plugs

Comfit coupling• Compression-proof up to 12 bar at 60 degrees for two hours.• Lower compression strength at temperatures below 0 degrees C.• Adapted for HDPE PN 10, as per DIN 8076 T3.• Comfit is not transparent and UV resistant.• Maximum exposure time in daylight: Two years.

SAB no E no Designation Measurements Weight, kg

57051232 E0663997 KHR – 32 32 mm 0.07 kg

57051240 E0663998 KHR – 40 40 mm 0.07 kg

57051242 KHR – 50 40-32 mm 0.07 kg

57051250 50 mm 0.07 kg

57051252 50-32 mm 0.07 kg

57051254 50-40 mm 0.07 kg

Comfit pipe plugs with loop

SAB no E no Designation Measurements Weight, kg

57051001 (E0664152) 25 mm 19-24 mm 0.020 kg

57051002 (E0664080) 32 mm 26-31 mm 0.025 kg

57051004 (E0664081) 40 mm 30.5-39 mm 0.033 kg

57051006 (E0664082) 50 mm 38-49 mm 0.050 kg


Notes


SAB Elteknik offers a complete

range of products for electricians.

Whether you work with fibreoptics

or power cables – we provide

materials. tools, instruments,

machines, implements and safety

equipment that help you in your

work.

Would you like advice or cannot

find what you are looking for?

Contact us, our job is to guide

you to the right equipment.

SAB Elteknik AB, ÖverlidaMjöbäcksvägen 2 512 60 Överlida, SwedenPhone +46 651-760 790 Fax +46 651-156 79

SAB Elteknik AB, Ljusdal Plåtslagargatan 27 827 35 Ljusdal, SwedenPhone +46 651-760 790 Fax +46 651-156 79

[email protected] www.sabp.se

product catalogue · sab elteknik has been appointed sicame group's exclusive distributor in...

Documents