product reference guide - exterior pro inc. · product reference guide ... exceptional metals...

Product Reference Guide

A Division of Duro-Last®Roofing, Inc.

2 Duro-Last Metal Products Guide

Scuppers ........................................4Collector Boxes ..............................5Conductor Heads ..........................5Vinyl-Coated Pitch Pan ................6ATR Hub ........................................6Duro-Guard Fascia Covers..................................7Duro-Guard 4˝ Flex Fascia Cover ......................7Duro-Guard 2-Piece Snap-On Compression ..................82-Piece Flex Snap-OnCompression..................................82-Piece Snap-OnCompression LG ............................9Duro-Guard Snap-On Fascia Base ....................................9Vinyl-Coated Drip Edge ................10Arch Drip Edge ..............................10T-Edge Plus ....................................11T-Edge ............................................11Duro-Guard GravelStop Covers ....................................12Edge Extender ................................12Snap Coping ..................................13Flat Coping ....................................13Canted Coping ..............................14Arched Coping ..............................14Custom Cornice Flashing ................15Reglets ............................................15Parapet Wall Vent ..........................16Vented Ridge Cap ..........................16X-Series Gutters ............................17X-Series Gutter Accessories ....................................18Downspouts ..................................19Standing Seam ..............................20Paint and Substrate Warranties ....22Color and Substrate Availability ..23Color Chart ....................................24

EXCEPTIONAL Metals products reduce installation expenses andincrease productivity.

Our wide assortment of standard and custom-fabricated products are quick and easy to install, helping to reduce labor costs by eliminating on-site metal fabrication.

Using a single source for metal accessories makes sense.Ordering prefabricated metal accessories with your Duro-Last materials

eliminates the need to invest in costly metal forming equipment, carry additional metal inventory, or hire skilled labor to craft metal roofing components.

We offer edge-to-edge warranty protection.Duro-Last installations that include EXCEPTIONAL Metals perimeter details

are protected by a comprehensive edge-to-edge warranty that guarantees thewatertight integrity of the roof.

EXCEPTIONAL Metals products installed outside of the building perimeterare warranted to retain their finish for years to come.

Scheduling is predictable with our quick turnaround and guaranteedon-time delivery.

Each Duro-Last manufacturing facility stocks Duro-Guard® Edge Systemproducts in four of our most-popular finishes: stone white, sierra tan, mediumbronze, and dark bronze. These products are ready-to-ship within five businessdays. All other EXCEPTIONAL Metals products, including custom metal itemsand Duro-Guard edge details ordered with any other finish, are usuallyshipped within 10 business days.

EXCEPTIONAL® Metals, a division of Duro-Last®Roofing, Inc., offers a complete line of metal edging and accessories to finish any roofing project as well as standing seam roofing panels.

Following Duro-Last’s commitment to quality, eachproduct is made to exact specifications. Completedproducts are carefully inspected, a protective film isapplied, and then they are shipped to the job site, ready for installation.

Duro-Last Metal Products Guide 3

KYNAR® is a registered trademark ofElf Atochem North America, Inc.

Duro-Last and EXCEPTIONAL Metals: Offering a single source of prefabricated roofing materials engineered for unsurpassedprotection, durability, and efficiency.

*Call for color availability.

If you need a custom detail, vinyl-coated metalproduct, or roofing accessory, our skilled staff can make it.

Let us save you time and resources. Simply submita drawing for a free estimate and allow us to designa quality-assured product that meets your needs.Whether you require one item or 100, we fabricateall runs quickly and efficiently.

EXCEPTIONAL Metals manufactures a widevariety of innovative products using vinyl-coatedmetal. The same vinyl film used in the Duro-Lastroofing membrane is permanently bonded to24-gauge steel. A membrane skirt is then attached,enabling contractors to use familiar installationtechniques to heat weld the complete vinyl-coatedproduct to the installed Duro-Last membrane onthe rooftop.

We stock all 35 24-gauge Kynar® metal finishes listed on our color chart (see page 24). In additionto these standard metals, we also have specializedmetals including:

• .040 and .050 Aluminum Kynar Finish* • .040 and .050 Aluminum Mill Finish • 16-Oz. Copper• 24-Gauge Stainless Steel • 24-Gauge Bonderized (Paintable) Steel

Our quick turnaround helps keep your project on schedule. Additional fabrication time may berequired for customized products.

“If you can draw it, we can make it.”

• Offer watertight through-walldrainage.

• Reduce installation time andeliminate field fabrication.

• Assembled with 24-gaugevinyl-coated metal andDuro-Last membrane.

• Available with one or two skirtsto allow hot-air welding to roofmembrane and to wall flashing.

Single Skirt

Double Skirt

• Features 2˝ wide metal terminatingflange for easier installation.

• Choose from white, tan, gray ordark gray vinyl-coated metal andwhite, tan, gray, dark gray, terracotta, or Rock-Ply membrane.

• Colors may be mixed or matched.

Metal Flange

• Choose from white, tan, gray or darkgray vinyl-coated metal and white,tan, gray, dark gray, terra cotta, orRock-Ply membrane.

• Colors may be mixed or matched.

Every Scupper: Actual Opening Height Minus 1/4˝ = Order Height

Every Scupper: Actual Opening Width Minus 1/4˝ = Order Width

Single Skirt Scupper: Actual Wall Thickness Plus 1˝ = Order Length

Double Skirt Scupper: Actual Wall Thickness = Exact Order Length

Metal Flange Scupper: Actual Wall Thickness = Exact Order Length

Metal Flange

Double Skirt

Single Skirt

• Choose from white, tan, gray ordark gray vinyl-coated metal andwhite, tan, gray, dark gray, terracotta, or Rock-Ply membrane.

• Colors may be mixed or matched.• Metal flange can be ordered in

any metal finish.


• Prefabricated to specificthrough-wall scupper openingto eliminate field fabrication.

• Available in any metal finishexcept 16-oz. Copper, withattached scupper made from24-gauge vinyl-coated metalthat includes a membrane skirtin white, tan, gray, dark gray,terra cotta, or Rock-Ply.

Conductorshown with

metal flange.


• Conductor heads complement theroof design and direct rain waterinto downspouts.

• Available in all stocked finishesand can be used in conjunctionwith metal flange scupper.

Attachment flange(See Note)

Apply sealant

Factory-welded seam

Factory-applied mastic 2˝ from all sides of scupper opening

Note: Backseal, topseal, and fasten top flange6˝ on-center. Apply a bead of Duro-Last caulk ontop of flange.

Factory weld

Note 1: Apply a bead of sealant or mastic between the collector headand the wall.Note 2: Backseal and fasten top flange of collector 6˝ on center.

Apply sealant

Metal flange

Duro-Last approvedfastener

Field weld

Factory weldApply sealant

Metal conductor

• Prefabricated pitch pans deliverwatertight seal around rooftopprotrusions.

• Made of vinyl-coated metaland Duro-Last membrane skirt.

• Available in 8˝ heights withcustom lengths and widths.

• Choose from white, tan, gray,dark gray, terra cotta, or Rock-Ply membrane.

• Offers a solution to the needfor multiple pitch pans in onesmall area.

• Replaces the need for pourablefiller with a 24-gauge Galvalumeprefinished top.

• Made of vinyl-coated metal andDuro-Last membrane skirt.

• Available in 8”x8”x14” standardor custom sizes.

• Choose from white, tan, gray,dark gray, terra cotta, or Rock-Ply membrane.

Pipes or conduit

Approved sealer 1⁄2˝ to 3⁄4˝depth. Tool to shed water.

Filler (mortar, insulation, etc.)

Fasten metal flange18˝ on-center orminimum 1 per side.

Roof deck insulationRoof deck

Note 1: Water must not be allowed to pond within the pitch pan. Be sure that theapproved sealer is level with the top of the curb.Note 2: Fasten deck membrane around perimeter of flashing the same fasteningpattern as the field membrane, maximum 18˝ on-center, and no less than onefastener per side.Note 3: Pipes or conduit must have a minimum 1⁄4˝ clearance between objects orthe edge of the pan.


Metal pitch pan with factory – welded skirt (8˝ minimum height)

Note 1: Attach ATR Hub with approved Duro-Last fasteners, minimum one perside, or 18˝ on-center thru the bottom flange.Note 2: Weld the 6˝ skirt to the deck sheet membrane.Note 3: Use Duro-Last sealant at entry points to ensure a watertight seal.Note 4: Use stainless steel bands on round stacks and tighten taking care notto crush the wire, conduit, condenser line or object going thru the stack flashing.Note 5: Secure prefinished top with the two supplied screws.Note 6: To seal unused stacks pinch the end together and weld closed.When needed cut the welded portion off and re-use accordingly.

3˝ stacks factory installed

24 GA. galvalume prefinished top.Fasten with two screws (supplied)

24 GA. vinyl coatedmetal base

3˝ Stacks

See Note 4(Typ.)

6˝ Skirt

See Note 3(Typ.) See Note 1

Deck

• Provides professional finish.• End-notched for trouble-free

piece-to-piece docking.• Use with 1.75˝ and 4˝ fascia bars.• Available in 10´ length;

1.75˝ and 4˝ widths. • Both inside and outside prefab-

ricated corners are available. • Available in any metal finish.

FM-1-990

FM 1-825

• Pre-notched grooves allowfascia cover to easily snapover radial surfaces.

• Can be installed on both insideand outside radius edges.

• Available in 10’ length;4˝ width only.

Allow 1⁄8˝ gap for expansionand contraction. (Expansiontab must be installed beneaththe next installed piece.)

Duro-Last sealant

Metal fascia cover

1.75˝

4˝


Meets ANSI/SPRI ES-1 2003 method RE-2and TAS No. 111-95 testing requirements.

Fascia bar

Meets ANSI/SPRI ES-1 2003 method RE-2and TAS No. 111-95 testing requirements.

Note 1: Allow for 21⁄2˝ overlap on each piece.Note 2: Pre-notched at 3˝ intervals to allow the cover to flex.Note 3: Can be made with a flat face.Note 4: Allow for a 1⁄8˝ gap for expansion and contraction.Note 5: Do not use this detail for fully-adhered applications unless themembrane is back-sealed using Duro-Last caulk or strip mastic.

Note: Joints on the fascia bar mustbe offset by a minimum of 12˝ fromthe joints in the fascia cover.

Notches are cut toallow the cover toflex around a radius.

See Fig. A

Figure A

Note: Do not use this detail for fully-adhered applications unless the membraneis back-sealed using Duro-Last caulk or strip mastic.

Note 1: The use of this detail is not to exceed a 2˝ per 12˝ slope.Note 2: A wood nailer is required if one or more inches of insulation is used. Top of wood nailer is to be flush with top of insulation. Be sure that the woodnailer extends at least 1⁄2˝ beyond the horizontal edge of the snap-on base.Note 3: The fasteners used to attach the base to wood nailers, and the membraneto the face of the nailers, must be spaced no greater than 6˝ on-center. Thefastener spacing must be increased to 3˝ on-center when attaching the basewithin 10´ (min.) of the outside corners of the building.Note 4: Allow for 1⁄8˝ expansion gap between 10´ lengths of snap-on base.Overlap the snap-on covers by 2˝ between 10´ lengths.Note 5: When installing this detail with a 6˝ or greater vertical surface,additional mechanical attachment is required on the snap-on base.Note 6: The use of this detail is not allowed on fully-adhered installations.

Snap-on base

2-Piece Compression Metal Cover

Membrane shouldextend beyond woodnailer by a min. of 1˝.

Penetrationmin. 1˝

• Secures membrane while providingan aesthetically-pleasing finish.

• Caulks and sealants not required.• Base and cover made of 24-

gauge steel. • Available in any metal finish.• Available in 10´ length;

3˝ through 8 ̋widths.• 50 and 60-mil membrane coverage

available by special order.• Both inside and outside prefab-

ricated corners are available. • 4 ̋and 6 ̋widths are FM approved.


Meets ANSI/SPRI ES-1 2003 method RE-2 testing requirements.4˝ meets TAS No. 111-95 testing requirements.

• Duro-Last exclusive product.• Made with a flat face to help

conform to a radius.• Base and cover are notched in

3” intervals to allow metal toeasily conform to both insideand outside radial surfaces.

• Available in 10’ length;3” through 8” widths.

Cover

Base

Notches are cut toallow the cover toflex around a radius.

Fasten 6˝ on center with 1!˝ long roofingnails. Increase fastener spacing to 3˝ oncenter at the corners of the roof (10´ min.)

3⁄4˝

See Note 5

See 2-piece Snap-OnCompression for installationinstructions and requirements.

Min. 1⁄2˝

• Installs the same as 2-PieceSnap-On with pre-punchedholes in the base.

• Cover made of .040 aluminumand base made of 22-gaugegalvanized steel.

• Available in 10’ length;9” through 13” widths.

• 50 and 60-mil membrane cover-age available by special order.

• Available from the Saginaw,Michigan facility.

• Call for color availability.


• Original Duro-Last snap-on coverfits newly-designed base.

• Base made of 24-gaugeGalvalume Plus steel.

• Available in any metal finish.• Available in 10´ length;

4˝ through 8˝ widths.

Note 1: A 1⁄4˝ gap is required between sections of Duro-Last fascia base. Joints on thefascia base must be offset by a minimum of 12˝ from the joints in the metal cover.Note 2: A wood nailer is required if 1˝ of insulation or greater is used. The top ofwood nailer must be flush with top of insulation. Fasteners used to attach woodnailers must be spaced no greater than 18˝ on-center. The fascia base systemshould not be installed as a gravel/water stop. Note 3: Do not use this detail for fully-adhered applications unless the membraneis back-sealed using Duro-Last caulk or strip mastic.

Fasten base using Duro-Last #14screw and a staggered screw spac-ing of 6˝ on-center.

Deck

2-Piece snap-on compression metal

Cleat lip to extend past membrane.

Fascia base

4˝ and 6˝ meet ANSI/SPRI ES-1 2003 method RE-2 testing requirements.

Min. 1⁄2˝

Note 1: A wood nailer is required if one or more inches of insulation is used. Top of wood nailer is to be flush with top of insulation. Be sure that the wood nailer extends at least 1⁄2˝ beyond the horizontal edge of the snap-on base.Note 2: The fasteners used to attach the base to wood nailers, and the membraneto the face of the nailers, must be spaced no greater than 6˝ on-center.Note 3: Allow for 1⁄8˝ expansion gap between 10´ lengths of snap-on base. Overlap the snap-on covers by 2˝ between 10´ lengths.

Penetrationmin. 1˝

Bird Beak strengtheningbend on 9˝ to 13˝vertical surface only.

Fasten 6˝ on center with1!˝ long roofing nails.

3⁄4˝

2-Piece Compression LG.Aluminum CoverSnap-on base 22 GA.Galvanized


Note 1: An overlap of 11⁄2˝ is required between sections of vinyl-coated metal.A bead of caulk is required in each overlap.Note 2: A wood nailer is required if 1˝ or more of insulation is used. Top of wood nailer must be flush with top of insulation.Note 3: Drip edge must be fastened 6˝ to 8˝ on-center.Note 4: A cleat must be installed on each drip edge with a face of 4˝ or greater. Cleat must be fastened 6˝ on-center.Note 5: This edge detail has not been tested to ANSI/SPRI ES-1 standards andmay not be compatible with certain specifications.Note 6: Do not use this detail for fully-adhered applications unless themembrane is back-sealed using Duro-Last caulk or strip mastic.

Fasten 8˝ on center Duro-Last vinyl-coated metal

Metal cleat (See Note 4)

• Provides visually-appealingtermination.

• Profiles can be custom-fabricatedto meet most specifications.

• Available in 10´ length;2” through 6” widths.

• Choose from white, tan, gray ordark gray vinyl-coated metaland white, tan, gray, dark gray,terra cotta, or Rock-Ply membrane.

Note 1: Install Duro-Last parapet flashing per detail 6010.Note 2: Splice cleats are required when face size is 4˝ or greater. Splice cleatsare installed 24˝ on-center using four Duro-Last approved fasteners. (must position a cleat at each joint)Note 3: Fasteners are spaced no greater than 6˝ on-center.Note 4: When more than one arched drip edge is used, install the drip edge to shed water down the arch by centering one section at the top of the arch.Note 5: This detail requires the 6˝ wide stripping to be field welded.Note 6: Edges pre-notched for an overlapped joint. Apply an approved Duro-Last sealant at all joints.

6˝ wide strippingmaterial (Field weld)

Arched drip-edge

Single-ply membrane

See Note 6

Sealant

See Note 2

Vinyl coated metal6˝ wide stripping

18 GA. splice cleat

• Provides a smooth finish thatis an aesthetically-pleasingalternative to traditional piecing.

• Available in 5’ – 10’ lengthsdepending on building’s archspecifications.

• Face is available in 24-gaugegalvalume and .032 aluminum.

• Roof flange is made of vinyl-coated metal.

• Vinyl-coated roof flangeenables welding a separateskirt to both the flange andthe installed roof membraneto provide watertight seal.


Metal/Aluminumface

Field Weld

• Combines the functionality ofvinyl-coated drip edge and theprofessional finish of fascia covers.

• Consists of splice plate, Kynar finishT-Edge metal base and vinyl-coatedhook strip with attached 6" mem-brane skirt that connects to theextended eave of the T-Edge.

• Available in 10´ length;2˝ through 6˝ widths.

• Choose from white, tan, gray ordark gray vinyl-coated metaland white, tan, gray, dark gray,terra cotta, or Rock-Ply mem-brane.

Note 1: Fasten the T-Edge base to the wood nailer with galvanized nails.Be sure to install a splice plate behind each section of T-Edge.Note 2: Attach the vinyl-coated hook strip to the T-Edge base and fasten it 6˝ on-center. Be sure that this row of fasteners also penetrates through the T-Edgebase. Hook strips must overlap each other by 1˝. Leave a 1⁄8˝ gap betweenindividual sections of the T-Edge base. Note 3: A continuous bead of sealant is required between the vinyl-coated metal hook strip and the T-Edge base.Note 4: A cleat is required on faces that are 4˝ or greater in size.Note 5: Weld the skirt of the hook strip to the roof membrane.Note 6: If this detail is to be used in a gutter, back-seal and fasten the membrane6˝ on-center.

• Double-folded drip edge neatlyconceals the vinyl-coated hookstrip.

• Consists of splice plate, Kynarfinish T-Edge metal base andvinyl-coated hook strip withattached 6˝ membrane skirtthat connects to the extendedeave of the T-Edge.

• Available in 10´ length;2˝ through 6˝ widths.

• Choose from white, tan, gray ordark gray vinyl-coated metaland white, tan, gray, dark gray,terra cotta, or Rock-Ply membrane.

Note 1: Fasten T-Edge base to the wood nailer with galvanized nails. Be sureto install a splice plate behind each section of T-Edge.Note 2: Attach the vinyl-coated hook strip to the T-Edge base and fasten 6˝on-center. Be sure this row of fasteners also penetrates through the T-Edgebase. Hook strips must overlap each other by 1˝. Allow a 1⁄8˝ gap betweenindividual sections of the T-Edge base.Note 3: A continuous bead of sealant is required between the vinyl-coatedmetal hook strip and the T-Edge base.Note 4: A cleat is required on faces that are 4˝ or greater in size.Note 5: Weld the skirt of the hook strip to the roof membrane.Note 6: If this detail will be used in a gutter, back-seal and fasten the membrane6˝ on-center.

Meets ANSI/SPRI ES-1 2003 method RE-2 testing requirements.4˝ meets TAS No. 111-95 testing requirements.

Sealant Vinyl-coated metal hook strip w/skirt

Splice plate

Duro-Last membrane

T-Edge Plus

Sealant

Vinyl-coated metalhook strip with skirt

Kynar finish T-Edgemetal base

Splice plate

The use of thisdetail is not allowedon fully-adheredapplications.

The use of thisdetail is not allowedon fully-adheredapplications.



FM 1-990

FM 1-930

Allow for a 1⁄8˝ gap for expansionand contraction. (Expansion tabmust install beneath the nextinstalled piece.) Install leftto right.

Be sure to caulk the gap betweensections of vinyl gravel stop.

Gravel stop

Metal cover system

• Provides a professional finishwhile securing aggregate (gravel)material and single-ply membrane.

• Used with 2˝ and 4˝ gravel stop.• Available in 10´ length; 2˝ and

4˝ widths. • Both inside and outside prefab-

ricated corners are available.• Available in any metal finish.

Note 1: Joints on the gravel stopmust be offset by a minimum of12˝ from the joints in the gravelstop cover.

Meets ANSI/SPRI ES-1 2003 method RE-2 testing requirements.

Note 2: Do not use this detail for fully-adhered applications.

4˝

2˝

Note 1: The continuous cleat and edge extender must be fastened 6˝ on-center.Note 2: All joints and splices must be staggered a minimum of 12 .̋ Note 3: Extenders 4˝ or wider require 31⁄2˝ cleat.Note 4: Do not use this detail for fully-adhered applications unless the membraneis back-sealed using Duro-Last caulk or strip mastic.

• Used to extend perimeteredge widths.

• Can be used with all edgedetails including gutterand coping.

• Available in 10´ length;3” through 8” widths.

Continuous cleat

Extender

Duro-Last sealant

6˝ concealed splice plate

24-gauge coping cap (10´ lengths)

16-gauge galvanized steel cleat (16˝ lengths)

12˝ and 16˝ meet ANSI/SPRI ES-1 2003 testing requirements.12˝ meets TAS No. 111-95 testing requirements.

Note 1: All coping cap joints must utilize a 6˝ concealed splice plate.Note 2: All joints are to be sealed with an approved Duro-Last sealant on top ofthe splice plate, on both sides of the joint. Allow a 1⁄4˝ gap between coping sections.Note 3: All cleats must be fastened 12˝ on-center.Note 4: All fasteners must penetrate into the nailer a minimum of 11⁄2˝.

Metal cleatFasteners – 12˝ on-center

Concealed splice plateFormed metal coping cap

Hex-head screws with neoprene washer(24˝ on-center max.)

Note 1: All coping cap joints must utilize a 6˝ concealed splice plate.Note 2: All joints are to be sealed with an approved Duro-Last sealant on topof the splice plate, on both sides of the joint. Allow a ˝ gap between copingsections.Note 3: On the inside edge of the coping cap base cleat, leave a 3⁄8˝ gapbetween the cleat and the wall to allow the coping cap to snap into place.Note 4: All fasteners must penetrate into the wood nailer a minimum of 1˝.


• Provides complete finish onparapet walls.

• Coping is fabricated using24-gauge steel with Kynar finish.

• Available in 10´ length; widthsare customized to specifications.

• 6˝concealed plate providescoverage for expansion andcontraction.

• Both inside and outside prefab-ricated corners are available.

• No fasteners are exposed.

• Provides complete finish toparapet walls.

• Installed using a continuousface cleat.

• 6˝ concealed plate providescoverage for expansion andcontraction.

• Available in 10´ length; widthsare customized for specifications.


Note 1: All coping cap joints must utilize a 6˝ concealed splice plate.Note 2: All joints are to be sealed with an approved Duro-Last sealant on top ofthe splice plate, on both sides of the joint. Leave a 1⁄4˝ minimum gap betweencoping sections. Note 3: All cleats must be fastened 12˝ on-center.Note 4: All fasteners must penetrate into the wood nailer a minimum of 11⁄2˝.

Metal cleat

Fasteners – 12˝ on-center

Formed metal coping cap

Hex-head with neoprenewashers 12˝ on-center

Shim as needed for support

6˝ concealed splice plate

Hex-head screws with neoprene washer(24˝ on-center max.)

• Ideal for parapet walls requiringwater to drain towards theroof side.

• Gives the same appearance ofthe snap coping.

• 6˝ concealed plate providescoverage for expansion andcontraction.

• Available in 10´ length;widths are customized forspecifications.

Note 1: Install Duro-Last parapet flashing per detail 6010.Note 2: All coping cap joints must utilize a 4˝ splice cleat. Note 3: All joints are to be sealed with an approved Duro-Last sealant.Note 4: Splice cleats are installed 24˝ on center using four Duro-Last approvedfastener.Note 5: Edges pre-notched for an overlapped joint. Note 6: Coping wider than 16˝ require additional top fasteners. See installationdetail 6056.

Hex-head screws with neoprene washer(24˝ on center max)

Pittsburgh Seam

18 GA. splice cleatMetal/Aluminumarched coping cap

See Note 5

Sealant

See Note 6

6˝6˝

• Provides a smooth finish thatis an aesthetically-pleasingalternative to traditional piecing.

• Available in 5´ - 10´ lengthsdepending on building's archspecifications.

• Available in 24-gauge galvalumeand .032 aluminum.

• Pre-notched lap joints provideproper water shed.



• Decorative flashing that deliversa contoured appearance aroundbuilding perimeters.

• Available in up to 5’ lengths.

• Provides extended watertightprotection along parapet walltermination.

• Shields fasteners from elements,preventing oxidation.

• Available in 10´ length.• Available in any metal finish.• Custom-fabricated to specific

projects.Note 1: This detail is only applicable to concrete or block walls.Note 2: Membrane must terminate 8˝ (min.) from the surfaceof the roof.

Lead wedgeand caulk

Rivet into place(24˝ on center,max.)

2 Piece regletcounter flashing

Termination bar(fasten 6˝ on cen-ter using Duro-Last fasteners.)

Sealant

Duro-Lastmembrane


Note 1: Vented Ridge Cap comes in 10´ lengths with a factory welded 6˝ skirton each side. Splice plates are used to join sections.Note 2: For new construction and re-roof installations, contractor shall followlocal building code to determine the opening needed at the ridge under thevented ridge cap. Note 3: Duro-Last deck sheet must be installed prior to the installation of thevented ridge cap.Note 4: 16-gauge support chair brackets are required at 5´ on-center.

24-gauge vinyl-coated metal See note 4

Insect barrier

Factory WeldPre-punched vents

Field weld

Fasten 6˝ on-center withDuro-Last approved fasteners

Nail to secure membrane in place

Note 1: Precut a 14˝ x 10˝ opening in the upper 1/3 of the parapet wall aminimum of 8˝ from the finished roof surface.Note 2: Install Duro-Last wall flashing according to detail 6010. Note 3: Cut the parapet wall flashing that covers the precut opening and foldmaterial to the inside of the opening and nail (inside only).Note 4: Install the Duro-Last wall vent over opening and fasten the metalflanges with the pre-punched holes. Minimum of two per side.Note 5: Weld the 6˝ skirt completely on all edges to the parapet wall flashing.

24-gauge prefinished galvalumewall vent with 24-gauge vinylcoated metal flange and 6˝ skirt

All openings includefoam insect barrier(See side profile)

Pre-punchedholes

Side profile

8˝ Min.

10˝

14˝

Approved fasteners inpre-punched holes

• Manufactured from 24-gaugevinyl-coated metal with orwithout an attached 6˝ skirt.

• Available in 10´ length;extending 8˝ out each sidefrom the peak.

• Choose from white, tan, grayor dark gray vinyl-coatedmetal and white, tan, gray,dark gray, terra cotta, or Rock-Ply membrane.


Deck

• Manufactured from 24-gaugevinyl-coated metal and pre-finished galvalume.

• Engineered for maximumventilation with pre-punchedslots on the bottom alongwith louvered face.

• Insect barrier included.• Comes 14˝ wide and 10˝ tall

with a 6˝ skirt.• Choose from white, tan, gray,

dark gray, terra cotta, or Rock-Ply membrane.



Style A B CEX-4 6˝ 4˝ 4˝EX-5 7˝ 5˝ 5˝EX-6 7˝ 6˝ 5˝MX-4 6˝ 4˝ 4˝MX-5 7˝ 5˝ 5˝MX-6 7˝ 6˝ 5˝DX-4 6˝ 4˝ 4˝DX-5 7˝ 5˝ 5˝DX-6 7˝ 6˝ 5˝LX-4 6˝ 4˝ 4˝LX-5 7˝ 5˝ 5˝LX-6 7˝ 6˝ 5˝

EX-STYLE

MX-STYLE

LX-STYLE

DX-STYLE

EX-Style Gutter

MX-Style Gutter

DX-Style Gutter

LX-Style Gutter

Straps can be factory installedfor an additional cost.


Fasten 24˝ on-center tonailer or roof deck.

End cap (Rivet into place,2 rivets per surface, min.)

Splice plate (Leave 1⁄4˝ gapbetween gutter sections)

Note 1: All joints, splices, corners, and end caps are to be riveted into position.On splice plates, a minimum of two rivets and two fasteners are to be used asillustrated above.Note 2: All joints, splices, corners, and end caps must have Duro-Last approvedsealant applied to them to ensure a water-tight application. Apply a bead ofsealant to the splice plate on both sides of the joint.Note 3: One expansion joint should be installed for every 40-50 feet of gutterbeing installed. Note 4: Drainage slope and drain sizes are to be determined by local buildingcode requirements and are the responsibility of the contractor to follow.

• Available in four standard pro-files and three different sizes.

• Gutters can be customized tomeet specifications.

• Installed gutter straps savetime by eliminating drillingor riveting.

• Inside and outside miters canbe fabricated to any angle.

• Internal splice plates reduceinstallation time.

Splice Plate

End Cap(Shown installed. Sold separately)

X-Series Gutter Miter

X-Series Gutter Attachment

Gutter straps(24˝–30˝ on-center)field installed

Duro-Last Caulk

Strip mastic(Back seal membrane)

Wide End

Narrow End

80˚ Elbow45˚ Elbow

Drop/Outlet

Note 1: Install all elbows with a minimum of two pop rivets per side. Place overlapping joints in progressive order to ensure a water-shedding joint.Note 2: Install wall straps with a minimum of two pop rivets placed into downspouts.Two straps must be installed for every 10´ section of downspout. It is recommended(not required) that the straps be installed to cover the joints of each section.Note 3: Available in both open and closed faces.

Drop / Outlet• Securely attaches gutters to

downspouts.• Can be custom ordered to meet

gutter dimensions. • Shipped separate from gutters.

Square to Round Adapter• Transitions square downspouts

to ground drains or downspouts.A-Style B-Style

• A and B-Style elbows are available in 80˚ and 45˚ angles. A-Style elbows directwater away from the building. B-Style elbows direct water alongside the building.

• Made of stainless steel. • Available in all metal finishes.• Shipped in quantities of 250.

DS 34 3˝ x 4˝DS 44 4˝ x 4˝DS 45 4˝ x 5˝DS 57 5˝ x 7˝DS 66 6˝ x 6˝

Downspout Sizes

• Install all elbows with a minimum of two pop rivets per side. Place overlappingjoints in progressive order to ensure a water-shedding joint.

A-Style Elbow B-Style Elbow

Closed

• Open-face downspoutseliminate debris and ice blockage.

• Closed downspouts featurePittsburgh seams.

Open

Square to RoundAdapter

Drop / Outlet

RivetStrap

Mounting Hole



EXCEPTIONAL Metals is pleased to offer standing seam panels with over 30 metal colors and finishes.EXCEPTIONAL Metal's standing seam roofing options will enhance the appearance of any sloped roof design.Profiles are available for architectural, structural, and flush wall/soffit panel standing seam applications.

Depending on where your project is located, the roof panels will be produced at or near the job site, or at EXCEPTIONAL Metals' Saginaw, Michigan facility. In either case, your standing seam panels will be made with the attention to detail and quality that our customers have come to expect. For more information, contact EXCEPTIONAL Metals at 800-248-0280 or visit www.exceptionalmetals.com.


EM 150SLThe 11⁄2˝ Snap Lock metal roofing system is designed to be installed quickly, reducing labor costs andoffers the designer a concealed fastener and clip application that allows for expansion and contraction.

EM 150SSThe 11⁄2˝ traditional mechanically seamed metal roof system enhances the architectural appearanceand is engineered to exceed most wind-load requirements in the country. The seamed profile allowsthe designer the ability to specify various applications. The concealed fasteners and patented articulatingtwo piece floating 150 Mitchell Clip assist in minimizing theappearance of oil canning.

EM 175SThe 13⁄4˝ Snap Lock profile provides a continuous interlocking metal roof system. The system offers thedesigner a concealed fastener and clip application that allows for expansion and contraction. The SnapLock metal roofing system can be installed quickly, reducing laborcosts. This is a simple installation for extremely high design pressures.

EM 200SThe 2˝ mechanically seamed metal roof system enhances the architectural appearance and is engineeredto exceed most wind load requirements in the country. The versatility of this profile’s engineering allowsthe designer the ability to specify from low to steep slope applica-tions. The concealed fasteners and patented articulating two piecefloating 200 Mitchell Clip assistin minimizing the appearance ofoil canning.


The following warranties are applicable, depending on the combination of the substrate metal yourstanding seam panels are made from and the finish that is applied:

• 35 Year Non Pro-rated Kynar® Paint Warranty with a 20 year Galvalume® Substrate Warranty • 35 Year Non Pro-rated Kynar® Paint and 25 year Aluminum Substrate Warranty• 25 Year Non Pro-rated Galvalume® Plus (Acrylic Coated Galvalume®) Warranty

See the back cover for additional color and warranty information.

Please contact your EXCEPTIONAL Metals representative when installing our products in saltenvironments. For our Galvalume warranty to be effective in salt environments or in proximityto bodies of salt water, the following criteria must be met:

• When the installation is near a coastline with surf, the distance from the coastline must bea minimum of 2,800 feet.

• When the installation is near a large bay, the distance from the bay shore must be a minimumof 1,200 feet.

Duro-Last standard colors are produced by AkzoNobel. All standards are formulatedto ensure consistent color and quality. The Trinar system is applied over AkzoNobelpolyester primer in a minimum thickness of 0.2 mil and can be applied to eitherGalvalume® HD Galvanized or Aluminum substrates. All topcoats are a minimum of 0.8 mil of theTrinar color of choice. The reverse side is primer and a washcoat of 0.5 mil total dry film thickness.

Duro-Last offers a mill finished Galvalume with a two-sided, clear chromate/acrylic finish that simulta-neously aids roll forming without the use of lubricants and eliminates unsightly handprints or stainsresulting from handling and storage. The acrylic finish dissolves naturally over a period of time, andwhen left as is, allows for natural and even weathering.


† See colors and descriptions on next page. 26 gauge and .032 Aluminum are for standing seam products only.

Aged CopperAntique Patina BuckskinBurgundyChampagne Metallic Charcoal GrayColonial RedCopper Metallic Dark Bronze Dove GrayEvergreenGalvalume PlusHartford GreenHemlock GreenIsland BlueMansard BrownMatte BlackMedium Bronze Pacific BluePatina GreenPre-weathered Galvalume Regal BlueRegal Red †Regal WhiteSandstoneSea GreenSierra Tan Silver Metallic Slate BlueSlate GraySolar WhiteStone White Surrey BeigeTealTerra Cotta

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

4628252946252741274229692537382827342530282744856434416438468180462946

X

X

X

X

X

X

X XX X

X

XXX

X X

X

XX X

X

X

X XX XXX

X

XXX

X X

XX

XX

X

X

X X

XXXX X

XX X

X

XX

Color - 35-Year Warranty 24 Gauge

26 Gauge

Aluminum .032

Aluminum .040

Aluminum .050

Solar ReflectanceIndex (SRI)

“Duro-Last”, the “World’s Best Roof”, “Duro-Guard”, and “EXCEPTIONAL Metals” are registered marks owned by Duro-Last Roofing, Inc.

EM Product Reference Guide 4/11 – 95522-020 / M#EM09-0001

Color Chart

Stone WhiteSR.66/TE.87

Slate GraySR.41/TE.87

Sierra TanSR.37/TE.87

Copper Metallic SR.37/TE.87

Solar WhiteSR.67/TE.87

Regal WhiteSR.70/TE.87

Champagne Metallic SR.41/TE.87

Silver Metallic SR.54/TE.87

SandstoneSR.54/TE.87

Aged CopperSR.41/TE.87

Patina GreenSR.29/TE.87

Regal BlueSR.26/TE.87

Terra CottaSR.40/TE.87

Regal Red † SR.38/TE.87

Colonial RedSR.26/TE.87

PremiumStandard

TealSR.28/TE.87

Charcoal GraySR.25/TE.87

Hemlock GreenSR.34/TE.87

Pre-weathered Galvalume SR.27/TE.87

BurgundySR.28/TE.87

Pacific BlueSR.26/TE.87

Sea GreenSR.32/TE.87

Hartford GreenSR.25/TE.87

Mansard BrownSR.27/TE.87

Slate BlueSR.35/TE.87

EvergreenSR.28/TE.87

Dove GraySR.38/TE.87

Dark BronzeSR.26/TE.87

Medium BronzeSR.32/TE.87

Matte BlackSR.26/TE.87

Island BlueSR.35/TE.87

Surrey BeigeSR.41/TE.87

BuckskinSR.25/TE.87

Antique Patina SR.27/TE.87

Galvalume PlusSR.68/TE.10

Gravel stop covers, 2-piece compression metal and fascia bar covers ordered in these finishes are availablewithin five business days. Products ordered in all other finishes may require additional fabrication time.

Available at additional cost.† Available with 20-year Non-Prorated Limited Warranty.

Specially ordered products will be filled as quickly as possible and shipped separately. Call for quotes.Other finishes are available, including 16-ounce copper, zinc, stainless steel and bonderized metal. Contact Duro-Last for information.

Colors shown are matched as accurately as possible,but may vary slightly from finished product.

EXCEPTIONAL Metals products contain recycled materialsand are also recyclable at the end of their useful life. Ourmetal product materials use infra-red reflective pigmentsand meet EPA ENERGY STAR® Roof Products Program performance criteria for steep slope (slope greater than2:12 inches) roofing applications.

product reference guide - exterior pro inc. · product reference guide ... exceptional metals...

Documents