product programme - prvastran - e-komunala programme | 3 av upper o upreme product production...
TRANSCRIPT
2 | Product programme
AVK's four main segments:
Water supply
Gate valves and acces-
sories, air valves, swing
check valves, butterfly
valves etc.
Wastewater treatment
Gate valves, knife valves,
air valves, check valves,
butterfly valves etc.
Fire protection
Gate valves, fire hydrants
and post indicators etc.
UL listed & FM approved.
Gas supply
Gate valves and acces-
sories, fittings, plug val-
ves, flow limitors etc.
AV K ' s p ro d u c t p ro g r a m m e
m e e t s Yo u r re q u i re m e n t s
AVK
AVK is one of the leading valve
manufacturers for the water, gas and
sewage industries as well as fire protection
worldwide.
Our product programme comprises a large
range of valves, hydrants, pipe fittings and
accessories, each complying with the
highest standards of safety and durability.
Today, we are the only producer offering
gate valves to most of the common
national and international standards such
as ISO, CEN, DIN, NF, BS, AWWA, JWWA,
SABS, AS and GOST. Our global position
ensures that we are able to give you, your
partners and your customers the quality
products you require.
Product development
Market proximity has always been at the
core of AVK's strategy; close contact with
the end-user ensures close monitoring
of the market and constant adaption and
development of the product programme to
meet with market requirements. This takes
place in our development department in
Denmark, an advanced technology centre,
where ideas and suggestions from many
different countries are gathered and where
existing products are continually adapted
and tested. In co-operation with the end
user, the products are field tested before
the final market launch, thus achieving the
best result in the individual markets.
AVK is certified according to ISO 9001
Product programme | 3
AV K
- s u p p l i e r o f s u p re m e p ro d u c t s
Production
Production takes place in Denmark, the
UK, the Netherlands, Switzerland, France,
Spain, Poland, the USA, Canada, Australia,
Germany, China, Japan, Malaysia, India
and Saudi Arabia. AVK's products are also
produced under licence in several other
countries.
Stock control and distribution to end users
are handled through a wide network of
sales companies, agents and dealers in
more than 85 countries. These service the
end-user, allowing AVK to monitor market
changes and keep abreast of customer
requirements.
AVK focuses on the environment
The products of AVK form part of
infrastructures, which play an important
role for the local environment the world
over. This for example, applies to the
supply of pure drinking water and the
draining of wastewater to treatment
plants. In all its internal processes, AVK
focuses on the environment as a natural
consequence of this.
Quality
AVK's products are marked by high,
consistent quality, competitive prices and
durability in line with market requirements.
This calls for strict quality control of the
production processes from beginning to
end and therefore AVK has been certified
according to ISO 9001.
When it comes to quality at AVK, nothing
is left to chance.
4 | Product programme
Series 15/42Flanged gate valve prepared for electric actuatorDIN F4DN 40-400PN 10 or 16Ductile iron
Options:•face to face DIN F5•hydraulic/pneumatic
actuator
Series 06 and 26Flanged gate valveDIN F4DN 40-400PN 10 or 16Ductile iron
Options:•replaceable stem
sealing•internal enamel•with pin indicator
Series 32/40Gate valve with long spigot endsfor cast iron pipes DN 80-300PN 16Ductile iron
Options:•short spigot ends for
D.I. pipes or AC pipes
Series 33/00Gate valve with socket ends for cast iron pipesDN 80-200 PN 16Ductile iron
Series 01/70Gate valve with Supa Plus™ couplings for PE and uPVC-pipesDN 40-300PN 16Ductile iron
Series 33/50Gate valve with BLS® socket end / BLS® spigot end DN 80-300 PN 10 or 16Ductile iron
Series 01/80Gate valve with "Euro" socket ends for uPVC-pipesDN 40-400PN 16Ductile iron
Series 02 and 20Flanged gate valveDIN F5DN 40-500PN 10 or 16Ductile iron
Options:•replaceable stem
sealing•internal enamel•PN 25
Gate valves
for water supply
Series 06/38Gate valve with grooved endsDN 50-300PN 16Ductile iron
Series 55/30Flanged gate valveDN 450-500-600PN 10 or 16Ductile ironResilient seatedFull boreReplaceable stem sealing
Options:•DN 80 By-pass•AVK PowerSaver™
for torque reduction
Seies 06Flanged gate valveDIN F4DN 450-600 and 800PN 10 or 16Ductile ironResilient seatedFull boreReplaceable stem sealing
Options:•DN 80 By-pass
Series 36/80Gate valve with PE ends, DN 65-300PN 10 or 16
Ductile ironPE 100 Options:•PE end / flange
Product programme | 5
Series 41/36Swing check valve with lever and weightMetal seatedDN 350-600PN 10 or 16Ductile iron
Options:•free shaft end
Series 756/102Butterfly valve Double eccentricDouble flangedStainless steel seatISO-input gearboxDN 200-2400PN 10 or 16Ductile iron
Options:•Integral seat•IP 67 gearbox•IP 68 gearbox
Series 41/60Swing check valve Resilient seatedFree shaftDN 50-300PN 10 or 16Ductile iron
Options:•lever and weight•lever and spring
Combi-cross, f loat valves,
swing check valves and
but ter f ly valves for water supply
Series 820/00Butterfly valveCentric with loose linerWafer typeDN 25-1000PN 10 or 16Ductile iron
Options:•various actuators
Series 41/61Swing check valve Resilient seatedClosed bushingsDN 50-300PN 10 or 16Ductile iron
Series 756/1Butterfly valve Double eccentricDouble flangedIntegral seatIP 67 gearboxDN 200-2400PN 10 or 16Ductile iron
Options:•stainless steel seat•IP 68 gearbox•ISO-input gearbox
Series 820/10Butterfly valveCentric with loose linerLug typeDN 25-600PN 10 or 16Ductile iron
Options:•various actuators
Series 820/20Butterfly valveCentric with loose linerU-section typeDN 150-1600PN 10 or 16Ductile iron
Options:•various actuators
Series 75/11Butterfly valveCentric with fixed linerWafer typeDN 40-1400PN 10 or 16Ductile iron
Options:•semi lug type•ull lug type•various actuators
Series 18/70Combi-cross with 4 outletsDN 100-300PN 10 or 16Ductile iron
Options:•3 outlets•combi-Tee with
flanged ends
Series 854Ball float valvewith lever and floatDN 50-300PN 16Ductile iron
Series 75/20Butterfly valveCentric with fixed linerDouble flanged shortDN 50-2000PN 10 or 16Ductile iron
Options:•double flanged long•various actuators
6 | Product programme
Service connect ion valves
for water supply
Series 03/00Service connection valve with internal BSP threadDN 25-50PN 16Ductile iron
Options:•internal enamel•water meter valve
Series 16/50Service connection valve with tensile socket ends for PE pipesDN 25-50PN 10 or 16POM (Polyoxymethylene)
Options:•external thread /
tensile socket end
Series 16/05Service connection valve with tensile screw couplings for PE pipesDN 25-50PN 10Brass
Options:•T-type bonnet
Series 03/30Service connection valve with tensile socket ends for PE pipesDN 20-50PN 10Ductile iron
Options:•external thread /
socket end •for side tapping with
internal thread / external thread
Series 16/25Service connection valve with PRK couplings for PE pipesDN 25-50PN 10Brass
Options:•T-type bonnet
Series 36/8X Service connection valve with PE endsDN 25-50PN 10 Ductile iron
Series 16/90Service connection valve with PRK-couplingsDN 25-50PN 10 or 16POM (Polyoxymethylene)
Options:•PRK coupling /
external thread
Series 11/00 Service connection angle valve with external thread on inlet and internal thread on outletDN 25-50PN 16Ductile iron
Series 03/90Service connection valve with PRK couplings for PE pipesDN 25-50PN 16Ductile iron
Series 03/65Service connection valve with tensile screw couplings for PE pipes DN 25-50PN 10Ductile iron
Options:•tensile screw
coupling for PE pipes / external thread
Series 11/30 Service connection angle valve with external thread on inlet and tensile socket end for PE pipes on outletDN 25-50PN 16Ductile iron
Series 16/80Service connection valve with PE ends
DN 25-50PN 10 or 16POM (Polyoxymethylene)
Product programme | 7
Series 701/10Automatic air valveThreaded BSP 1"DN 25PN 16Reinforced nylon
Series 701/50Combination air valveInlet flangeDN 50-200PN 16Grey cast iron/Reinforced nylon
Series 701/40Combination air valveThreaded BSP 3/4", 1" or 2"DN 20, DN 25 or DN 50PN 10: 3/4" and 1"PN 16: 2"Reinforced nylon
Series 701/20Automatic air valve Threaded BSP 1/2", 3/4", 1" male adaptorDN 15, DN 20 or DN 25PN 16Grey cast iron
Series 701/60Combination air valveInlet flangeDN 50-200PN 16Grey cast iron
Series 701/30Kinetic air valveInlet flangeDN 50-200PN 16Grey cast iron
Series 851/40Combination air valveDN 50-200PN 16 Ductile iron
Air valves for
water supply
Series 851/40Automatic air valveDN 25PN 16 Ductile iron
Series 701/84Underground air valve installation systemDN 50-100PN 0,1-10Air valve box of PVC
8 | Product programme
Gate valves and hydrants
for f i re protect ion
Series 27/00Dry barrel fire hydrant Modern styleBury depth 2 ½' - 10'250 PSIDuctile ironUL/ULC listed, FM approved
Inlet options:•4"-6" flanged•4"-6" mechanical
joint•6" push-on
Series 06/35Flanged gate valve with position indicator DN 50-400PN 10 or 16Ductile ironVdS approved (DN 50-200 only)
Series 45/59 nrSFlanged gate valve with wrench nut to AWWA C509 DN 100-300: 250 PSI DN 350-400: 200 PSIDuctile ironUL/ULC listed, FM approved
Options:•flanged, push-on
or mechanical joint ends
Series 45/56Flanged gate valve with rising stem DN 65-300250 PSIDuctile iron UL/ULC listed, FM approved
Options:•grooved ends or
grooved/flanged ends
Series 06/37Grooved end gate valve with position indicatorDN 50-300PN 16Ductile ironVdS approved (DN 50-200 only)
Series 34/80Wall post indicator,for DN 100-400 P.I. gate valvesStem length 250-1250 mmDuctile ironUL/ULC listed, FM approved
Series 34/00Post indicator, telescopic for DN 100-400 P.I.gate valvesBury depth: 505-2210 mmDuctile ironUL/ULC listed, FM approved
Series 24/90Wet barrel fire hydrant 200 PSI2 x 2½” + 1 x 4 / 4½” outletsDuctile ironUL listed, FM approved
Options:•1 x 2½” + 1 x 4 / 4½” •monitor flange 4”
and 2 x 2½” + 1 x 4 / 4½” outlets
Series 36/00Gate valve with PE ends and post indicator flange DN 50-300PN 10 or 16Ductile iron
Series 75/31Butterfly valve Centric with fixed linerSemi lugDN 50-300PN 10 or 16Ductile ironVdS approved
Series 75/41Butterfly valveCentric with fixed liningDouble flanged shortDN 50-300PN 10 or 16Ductile ironFM approved
Series 45/59Flanged gate valve with post indicator flange DN 100-300: 250 PSI DN 350-400: 200 PSIDuctile ironUL/ULC listed, FM approved
Options:•flanged, push-on
or mechanical joint ends
Product programme | 9
Series 29/40Underground fire hydrant with bayonet coupling DN 100PN 16Ductile iron
Options:•3" stortz oupling•3" NOR coupling•4" stortz coupling
Series 30Underground fire hydrant DN 100PN 16Grey cast iron
Hydrants for water
Series 84/10Post hydrant break-away design with additional ball shut-offModel P5DN 100Ductile iron
Options:•Lateral flange
Series 84/70Post hydrant break-away design with additional ball shut-offModel P6DN 80PN 16Stainless steel
Options:•Lateral flange
Series 84/40Post hydrant break-away design with additional ball shut-offModel P5, "NOSTALGIA" DN 80PN 16Ductile iron
Options:•Lateral flange•Different coating
opportunities
Series 87/00Hydrant BreakableDN 80/100PN 10/16 Stainless steel
Options:•non breakable
Series 87/80Tunnel hydrantDN 80PN 10/16Stainless steel
Series 78/7510Fountain post"VICTORIA"Frost-proofDN 40Grey cast iron
Options:•with outlet for fire
hose connection
Series 35/08Underground fire hydrant DN 80PN 16750-1500 mmDuctile iron
Series 35/18Underground fire hydrant DN 80PN 16750-1500 mmDuctile iron
Series 35/72Underground fire hydrant DN 125PN 161000-3500 mmDuctile iron
Series 09/30Above ground fire hydrant Screw down type BDN 80PN 10 Ductile iron
Options:•manual or automatic
drainage•aluminium body•gate valve operated
10 | Product programme
Gate valves and but ter f ly valves
for wastewater t reatment
Series 06/80Flanged gate valveDN 40-600 and 800PN 10 or 16NBR wedgeDuctile iron
Options:•AISI 316 stem•face to face DIN F5
Series 715Flanged gate valve with hydraulic actuatorDN 65-400PN 10 or 16NBR wedgeDuctile iron
Series 820/10Butterfly valve Centric with loose linerLug typeDN 25-600PN 10 or 16Ductile iron
Options:•for frequent
operation•U-section type•various actuators
Series 820/00Butterfly valve Centric with loose linerWafer typeDN 25-1000PN 10 or 16Ductile iron
Options:•for frequent operation •various actuators
Series 06/35Flanged gate valve with position indicatorDN 50-400PN 10 or 16EPDM wedgeDuctile iron
Options:•NBR wedge•face to face DIN F5
Series 06/89Flanged gate valve with rising stem DN 50-400PN 10 to 16Ductile iron
Series 75/31Butterfly valveCentric with fixed linerSemi lug typeDN 50-300PN 10 or 16Ductile iron
Options:•full lug type•various actuators
Series 75/20Butterfly valveCentric with fixed linerDouble flanged shortDN 50-2000PN 10 or 16Ductile iron
Options:•double flanged long •various actuators
Series 15/42Flanged gate valve prepared for electric actuatorDN 40-400PN 10 or 16Ductile iron
Options:•face to face DIN F5•hydraulic/pneumatic
actuator•NBR wedge
Series 55/30Flanged gate valveDN 450-500-600PN 10 or 16Ductile iron
Options:•AVK PowerSaver™
for torque reduction•DN 80 By-pass
Series 75/11Butterfly valveCentric with fixed linerWafer typeDN 40-1400PN 10 or 16Ductile iron
Options:•various actuators
Product programme | 11
Check valves, air valves, kni fe gate
valves and penstocks for
wastewater t reatment
Series 41/61Swing check valve Closed bushingsResilent seatedDN 50-300PN 10 or 16Ductile iron
Options:•Metal seated
DN 350-600
Series 53/35Ball check valve with flanged endsDN 50-600PN 10Ductile iron
Series 53/30Ball check valve with internal threadDN 32-50PN 10Ductile iron
Options:•stainless steel
DN 32-80
Series 701/33 Kinetic air valveDN 80-100PN 10 or 16Steel
Series 701/75 Combination air valveDN 50-100PN 10 or 16 Reinforced nylon
Series 702/20Knife gate valve with handwheel and rising stemDN 50-1200PN 10Grey cast iron
Options:•handwheel and non-
rising stem•chainwheel•electric or pneumatic
actuator•lever
Series 701/78 Large combination air valveDN 80–100 PN 16Steel
Series 41/60Swing check valve Free shaftResilent seatedDN 50-300PN 10 or 16Ductile iron
Options:•lever and weight•lever and spring•Metal seated
DN 350-600
Series 772/61Wall penstockBi-directional up to and incl. 1200 X 1200 mm, in larger sizes bi- or uni-directional With non-rising stem Stainless steel AISI 304200 x 200 mm - 2000 x 2000 mm
Options:•rising stem•AISI 316
Series 701/70 Combination air valveDN 50-200PN 10 or 16Steel
Serie 772/7172Channel penstockUni-directional up to and incl. 1000 X 1000 mm, bi-directional in larger sizes With non-rising stem Stainless steel AISI 304200 x 200 mm - 2000 x 2000 mm
Options:•rising stem•AISI 316
Series 701/79 Underground air valve systemDN 50-100 PN 10External box of polypropylene
12 | Product programme
Series 36/9XService connection valve with PE endsDN 25-50PN 4Ductile ironWith replaceable stem sealing
Options:•external PUR coating
Series 46/64Gate valve with short spigot endsDN 50-300PN 16GS-C 25 NWith replaceable stem sealing
Options:•external PUR coating
Va l v e s f o r g a s s u p p l y
Series 02/70Flanged gate valveDN 40-500PN 10 or 16Ductile ironWith replaceable stem sealing
Series 75Butterfly valveCentric with fixed linerDN 50-600PN 10 or 16Ductile iron
Options:•semi-lug, double
flanged•various actuators
Series 06/70Flanged gate valveDN 40-600PN 10 or 16Ductile ironWith replaceable stem sealing
Series 85/50Ball valve with spigot endsDN 16/Ø20 mm - DN 150/Ø180 mmPN 10PE 100
Series 310Excess flow limitor / safety valveAutomatic resettingPE pipe d.ex. 25 mm and 32 mmPN 4/PN 7 (PE)PN 30 (steel)Acetal
Series 36/90Gate valve with PE endsDN 80-300PN 4 or 10Ductile ironWith replaceable stem sealing
Options:•PE end / flange•external PUR coating
Series 03/25Service connection valve with internal threadDN 25-50PN 16Ductile ironWith replaceable stem sealing
Series 46/70Gate valve with long spigot endsDN 50-600PN 16GS-C 25 NExternal PUR coatingWith replaceable stem sealing
Options:•external epoxy
Series 221/40Ball valve with flanged ends and gearboxDN 25-500PN 100Carbon steel
Options:•up to PN 420•welding ends
Series 222/00Gate slide valve with steel welding endsDN 80-400PN 25External PUR coatingSteel
Options:•up to PN 100
Product programme | 13
F l a n g e a d a p t o r s
a n d c o u p l i n g s
Series 05Combi-flange for PE and PVC pipesNon-tensile DN 50-600Tensile DN 50-300PN 10 or 16Ductile iron
Series 631/00Supa Maxi™ universal tensile straight couplingDN 50-300PN 16Ductile iron
Options: •step coupling•for gas PN 10
Series 601Supa universal straight coupling DN 40-400PN 16Ductile iron
Options: •step coupling•flange adaptor
Series 711/50ORION universal straight couplingDN 50-300PN 16Ductile iron
Options: •step coupling•flange adaptor
Series 05Combi-flange for D.I. pipes Non-tensile DN 50-600Tensile DN 50-300PN 10 or 16Ductile iron
Series 634/00Supa Maxi™ universal tensile end capDN 50-300PN 16Ductile iron
Options: •for gas PN 10
Series 621/10Supa Plus™ coupling Tensile for PE and uPVC pipesDN 32-300Ductile iron
Options: •end cap
Series 623/10Supa Plus™ flange adaptor Tensile for PE and uPVC pipes DN 40-300Ductile iron
Series 05/08Support bush for PE pipesDN 50-300PN 6.3, 10, 12.5 or 16Stainless steel
Series 635/00Supa Maxi™ universal tensile transition coupling with factory mounted PE pipeDN 50-300PN 10 or 16Ductile iron
Options: •for gas PN 4 or 10
Series 52Fabricated coupling DN 350-1200PN 8 to 16Steel
Options:•flange adaptor•step coupling
Series 633/00Supa Maxi™ universal tensile flange adaptorDN 40-300PN 16Ductile iron
Options: •for gas PN 10
14 | Product programme
Series 712Socket fittingDN 50-500PN 10 or 16 Ductile iron
Options:•various types
Series 727/10Tapping saddle for underpressure drillingFor PE and PVC pipesDN 80-200
Series 712Flanged fittingDN 50-500PN 10 or 16Ductile iron
Options:•various types
ta p p i n g s a d d l e s ,
re p a i r c l a m p s a n d
p i p e l i n e f i t t i n g s
Series 10/00 Tapping saddle for uPVC and PE pipesDN 50-300 Ductile iron Lower part in stainless steel from DN 250
Series 10/14 Tapping saddle for cast iron, ductile iron and steel pipesDN 50-300 Ductile iron
Series 730/3Universal tapping saddle with shut-off for ductile iron, steel and other metal pipesDN 50-300Ductile iron/steel
Series 730/2Universal tapping saddle for ductile iron, steel and other metal pipesDN 50-300Ductile iron/steel
Series 729Repair clampsingle/double band 48-360 mm1/2"-3" BSP threadStainless steel AISI 304
Options:•AISI 316•width 200 to 600 mm•flanged/threaded
outlet
Series 727/09Tapping saddle SWIC for underpressure drillingWith integrated cutter for PE and PVC pipesDN 100-200
Options:•with integrated cutter
for steel pipes
Series 729Internal/external repair clamp400-3000 mmStainless steel AISI 304
Options:•AISI 316•width 200 to 400 mm
Series 265Dismantling joint for all types of pipes with flanged connectionsDN 300-1200PN 10 or 16Steel
Series 729Repair clampsingle/double/triple band 48-560 mmStainless steel AISI 304
Options:•AISI 316•width 200 to 600 mm
Product programme | 15
Va l v e a c c e s s o r i e s
Series 04Fixed street coverGrey cast iron
Floating street coverDuctile iron
Distance ring/square for fixed street cover
Series 04Stem caps for gate valves and service connection valvesDN 25-600
Series 80Surface box "Classic"Height adjustableBody in PA+Lid in cast iron
Options:•square or round•for gate valves,
service connection valves or underground hydrants
Series 04/008Street cover for telescopic extension spindleDuctile iron
Options:•round or square
surface plate•round or square lid
Series 04Extension spindle for service connection valvesDN 25-50
Options:•telescopic or fixed
length
Series 04Extension spindle for gate valvesDN 40-600
Options:•telescopic or fixed
length
Series 80Surface box "Classic"Fixed heightBody in PA+Lid in cast iron
Options:•square or round•for gate valves,
service connection valves or underground hydrants
Series 04Universal street coverDuctile iron
Series 80Surface box "Futura"Fixed heightBody in PA+Lid in cast iron or PA
Options:•square or round•PA lids in colour•for gate valves,
service connection valves or underground hydrants
Series 04/007Composite street cover for telescopic extension spindleBody in PELid in ductile iron
Options:•round - black•round - blue epoxy•square - black•square - blue epoxy
Series 36Valve foundation for gate valves with PE ends Steel
Series 08Handwheel for gate valvesDN 50-600Grey cast iron
2013-01-22Copyright©AVK Group A/S 2013
AVK International A/SBizonvej 1DK-8464 Galten, DenmarkTel.: +45 87 54 21 00Fax: +45 87 54 21 20 E-mail: [email protected]
Printed matter
AVK International A/S:Continental Europe, Russia, Northern and Central Africa, South Eastern Europe
AVK Sales Companies:AVK Norge ASAVK Mittelmann Armaturen GmbHAVK Nederland B.V.AVK Belgium N.V.AVK Armadan Sp. z o.o.AVK France S.A.SAVK Válvulas S.A.AVK Sverige ABAVK VOD-KA a.s.
AVK Finland OyInterApp Italiana S.r.l.InterApp AGIntetApp Ges.m.b.H.AVK International A/S Rep. office - RomaniaAVK International A/S Rep. office - BulgariaAVK International A/S Rep. office - Baltic
AVK UK Ltd.UK and Ireland
American AVK Co.North America and Mexico
AVK Australia Pty LtdAustral Asia
Saudi Valves Manufacturing Co. Ltd.The Arabian Peninsula
AVK OverseasThe Caribbean, Bermuda and Central America
AVK Valvulas do Brasil Ltda. Brazil, Argentina and Chile
AVK ChinaChina, Japan, Vietnam, Korea and Hong Kong
AVK Valves Southern Africa (Pty) Ltd.Southern Africa