product overview - fn niederhauser · gripping force tester wireless handheld with battery dynamic...
TRANSCRIPT
US-CL,-A, HB-D,-C, PB(I)-D,-C, STP M2-PB | M4-PB
GFT-X
SIN-S,-HL,-L | CSN VNK-T2 | VSG DCN | DCU | DCR | DCE | ZHVD-SZ
EM-A,-B | EM-S
KSZ-MB,-DZN,-AZN,-NZN,-AZL, GF 80, ACS
Postfach 1151 • D-88070 MeckenbeurenWiesentalstraße 28 • D-88074 MeckenbeurenTel. +49 (0) 7542 - 405 - 0
Vertrieb Inland:Fax +49 (0) 7542 - 3886E-mail [email protected]
Sales International:Fax: +49 (0) 7542 - 405 - 181E-mail [email protected]
SMW-AUTOBLOK Japan Inc.1-5 Tamaike-Cho, Nishi-Ku461-NagoyaTel. +81 (0) 52 - 504 - 0203Fax +81 (0) 52 - 504 - 0205E-mail [email protected]
SMW-AUTOBLOK Corporation285 Egidi Drive - Wheeling, IL 60090Tel. +1 847 - 215 - 0591Fax +1 847 - 215 - 0594E-mail [email protected]
SMW-AUTOBLOK ArgentinaRio Pilcomay 1121 - Bella VistaRA - 1661 Bella Vista Buenos AiresTel. +54 (0) 1146 - 660 603Fax +54 (0) 1146 - 660 603E-mail [email protected]
SYSTEC METALÚRGICA LTDAR. Luiz Brisque, 98013280-000 - Vinhedo - SPTel. +55 (0) 193 886 - 6900Fax +55 (0) 193 886 - 6970E-mail [email protected]
SMW-AUTOBLOK Workholding Pvt. Ltd.,Plot No. 45, B.U. Bhandari Industrial Estate,Sanaswadi, Tal. ShirurDIST. PUNE - 412 208Tel. +91 2137 - 616 974Fax +91 2137 - 616 972E-mail [email protected]
SMW-AUTOBLOK Mexico, S.A. de C.V.Pirineos No. 515-B, Nave 16Col. Industrial Benito JuarezMicro Parque Industrial SantiagoQueretaro, Qro. C.P. 76130Tel. +52 (442) 209 - 5118Fax +52 (442) 209 - 5121E-mail [email protected]
SMW-AUTOBLOK (Shanghai) Work Holding Co.,Ltd.Building 6, No.72, JinWen Road, KongGangIndustrial Zone, ZhuQiao Town, Pudong District201323, Shanghai P.R. ChinaTel. +86 21 - 5810 - 6396Fax +86 21 - 5810 - 6395E-mail [email protected]
Via Duca D‘Aosta n.24Fraz.NovarettoI-10040 Caprie - TorinoTel. +39 011 - 9638411Tel. +39 011 - 9632020Fax +39 011 - 9632288E-mail [email protected]
SMW-AUTOBLOK Workholding Ltd.8, The Metro CentreGB-Peterborough, PE2 7UHTel. +44 (0) 1733 - 394 394Fax +44 (0) 1733 - 394 395E-mail [email protected]
SMW-AUTOBLOK17, Avenue des Frères Montgolfier - Z.I Mi-PlaineF-69680 ChassieuTel. +33 (0) 4 - 727 - 918 18Fax +33 (0) 4 - 727 - 918 19E-mail [email protected]
SMW-AUTOBLOK RussiaB.Tulskaya str., 10, bld.3, off. 3203,115191 Moscow (Russia)Tel. +7 495 -231-1011Fax +7 495 -231-1011E-mail [email protected]
AUTOBLOK Company Ltd.NO.6, SHUYI RD., SOUTH DIST.,TAICHUNG, TAIWAN Tel. +886 4-226 10826Fax +886 4-226 12109E-mail [email protected]
SMW-AUTOBLOK s.r.o.Merhautova 20CZ - 613 00 BRNOTel. +420 513 034 157Fax +420 513 034 158E-mail [email protected]
SMW-AUTOBLOK Scandinavia AB Kasernvägen 2SE - 281 35 HässleholmTel. +46 (0) 761 420 111E-mail [email protected]
SMW-AUTOBLOK IBERICA, S.L.Ursalto 10 - Nave 2Pol. 27 - Mateo Gaina20014 San Sebastián (Guipúzcoa) (Spain)Tel. +34 943 - 225 079Fax +34 943 - 225 074E-mail [email protected]
www.smw-autoblok.de
www.smw-autoblok.de
Subje
ct to
typo`
s, er
rors
and t
echn
ical c
hang
es. 1
0.201
5
� Standard- and special jaws and T-nuts for all commercial chucks, soft and hard version
� Mounting adapters on short taper spindle noses, direct or indirect mounting
� Exchangeable grippers � Grease for manual and power chucks and for sealed chucks included in proofline®-series
� Gripping force tester � Wireless handheld with battery � Dynamic gripping force and static gripping force measuring
� Speed measuring � Display and PC software in various languages for data output on a laptop/computer
� 6 different measuring heads available
� Multible chucks on fixtures with 2 or 4 chucks
� Self centering � For milling machines and machining centers
� Built-in pneumatic cylinders � 2 or 3 jaws � Sizes: 130 - 315 mm
� Hydraulic or pneumatic stationary chucks with integrated cylinder
� For applications on machining centers and special machines
� INCH serration or Tongue & groove � 2 or 3 jaws � With and without through-hole � PBI-D,-C: With manifold for air supply (indexing only)
� Sizes: 80 - 800 mm
Jaws and Accessories
Stationary cylinder / chuck unit
Jaws, Adapters, Grippers, Grease
� Double piston, rotating hydraulic cylinders
� Up to 70 bar (DCN, DCU, DCR, DCE); up to 80 bar (ZHVD-SZ)
� Linear stroke control or proximity switches
� Central bore for air, coolant or oil � For high speed � DCN, DCU, DCR: Modular system for different piston strokes
� DCE: 2 x same piston area � ZHVD-SZ: for shaft chucks type W
� Rotating hydraulic cylinders, open center
� Up to 45 bar (VNK); up to 30 bar (VSG) � Linear stroke control or proximity switches
� CP-3 unit for rotary union � For high speed � VNK-T2: through hole up to 127 mm � VSG: Extra large through hole up to 204 mm
� Rotating hydraulic and pneumatic cylinders, closed center
� Up to 70 bar (SIN); up to 7 bar (CSN) � Central bore for air or coolant � For high speed � Linear stroke control or proximity switches
� SIN-HL: High-low gripping force clamping
� SIN-L: Long stroke � CSN: Pneumatic
Rotating cylinders
� Hand or power operated expanding mandrels
� up to max. 130 mm � Large expansibility 0,5 - 2 mm depending on size
� Flange mounting � Very rigid design � EM-S: Hardened and vulcanised sleeves, quick change
Mandrels
Collet chucks
� Collet chucks / Column chucks � Collet quick change � High gripping force and repeatability � Pull down effect or axial fixed position clamping
� For high speed � Air sensing
Mexico
Argentina
India
China
Japan
U.S.A.
Brazil
SMW-AUTOBLOK Spannsysteme GmbH
Spain
France
Great Britain
Russia
Taiwan
Czech Republic / Slovakia
Sweden / Norway
AUTOBLOK s.p.a.
PRODUCT OVER VIEWChucks | Steady Rests | Cylinders | Accessories
FRC-N | FRSTSB TPT-C,-RC TX-C | TX-RV TEF-C | IEP-D,-C | SJL W | GSA AXN
D | D-Plus D-Kombi D-Vario
TSF-C,-RM,-CP | TSR-C,-RM,-CP
SP | SP-ES | SP-L Big Bore | Big Bore 2G | SF-RAZ HYND-S | HYDL-S SLU-X | SLU(B) | SLU-A | SLUB-A SR | SRA SR-CL KLU | KLU-AK | KA SRG | SRG-B
AN-D,-M | AL-D,-M | AN-C AP-D,-M,-C | APL-D,-M,-C NT-D,-M,-C | NTL-D,-M,-C IN-D | IN-C | IL-D | IL-C | IR-C RAN | CL-C | CL-D
BH-D,-M | BHD(M)-FC | HFKN-D,-M BB-D,-M AG-2G BP
HG-N,-F | HG-2G PTF KNCS-N,-NB,-NBX KNCS-2G KNCS-NB CL AP-RC,-RD | NT-RC,-RD | AN-RM BH-RM
Open center power chucks
Quick jaw change power chucksManual chucks
� Radial and axial clamping � Quick change � Suitable for 2 media � Centrifugal force compensation � Proofline® - chucks = fully sealed - low maintenance
� Sizes: 210 - 400 mm
� Fine adjustment of the center line � Key Lock System = Quick positioning of jaws for gears with different num-ber of teeth
� Modular system with jaws for pitch line or outside clamping
� Proofline® - chucks = fully sealed - low maintenance
� Sizes: 215 mm
� O.D. or pitch line clamping � Quick change � Suitable for 2 media � Centrifugal force compensation � Proofline® - chucks = fully sealed - low maintenance
� D-Plus: with through hole � Sizes: 210 - 315 mm
� Automatic indexing chuck � Hydraulic clamping and indexing � Divisions: 4 x 90°/ 8 x 45°/ 3 x 120°/ 6 x 60°
� Proofline® - chucks = fully sealed - low maintenance
� 2 jaws � Accurate indexing system � High rigidity � Sizes: 210 - 1250 mm
� Shaft chucks with face driver, fixed or spring loaded center
� Retractable jaws � Complete machining of shafts in one operation
� Proofline® - chucks = fully sealed - low maintenance
� W: Self centering or compensating clamping - quick change
� GSA: Compensating clamping � Sizes: 200 - 480 mm
� 2+2+2 equalising chucks � Centrifugal force compensation � 6 jaws (2+2+2) � Proofline® - chucks = fully sealed - low maintenance
� TEF-C: Self centering with floating jaws, tongue & groove, active pull-down
� IEP-D: Self centering with rigid jaws, MODULE 2 serration
� SJL: Metric serrat. or tongue & groove � Sizes: 260 - 1600 mm
� Pull-down chuck with active pull-down � Self centering � Rigid jaws � Highest concentricity � Tongue & groove, RV = Quick change � Centrifugal force compensation � 3 jaws � Proofline® - chucks = fully sealed - low maintenance
� Sizes: 170 - 530 mm
� 2+2 jaw chucks closed center � Tongue & groove � Self-centering independent 2+2 jaw movement
� TPT-RC: Individual jaw regulation � Sizes: 210 - 2000 mm
� Pull-down chuck with passiv pull-down � Self centering or compensating clamping
� Rigid jaws � Proofline® - chucks = fully sealed – low maintenance
� High rigidity against torsion � 3 jaws � FRC-N: Compensating clamping � FRS: Self centering clamping � Sizes: 215 - 365 mm
� Quick jaw change wedge hook chucks � Quick jaw change with pallet system � Open center � Chuck body and internal parts case hardened
� High repeatability � 2 or 3 jaws � Sizes: 165 - 315 mm
� Quick jaw change wedge hook chucks � Closed center: serrated master jaws, tongue & groove or pallet system (RM)
� Chuck body and internal parts case hardened
� 2 or 3 jaws � AP-RC,-RD, NT-RC,-RD: Proofline® - chucks = fully sealed – low maintenance
� NT-RC,-RD: Centrifugal force compensation for high speed
� Sizes: 165 - 400 mm
� Quick jaw change wedge bar chucks � Large through hole � Chuck body and internal parts case hardened
� Flexibility: jaws radially adjustable /reversible
� Jaw safety interlock � 3 jaws � KNCS-NB: All top jaws can be used � KNCS-NBX: Extra large through hole � Sizes: 140 - 1000 mm
� Quick jaw change wedge bar chucks � Large through hole � Protection against chips and swarf � Flexibility: jaws radially adjustable /reversible
� Jaw safety interlock � 3 jaws � Sizes: 210 - 400 mm
� Quick jaw change wedge bar chucks � Large through hole � Integrated fine adjustment � Chuck body and internal parts case hardened
� Flexibility: jaws radially adjustable /reversible
� Jaw safety interlock � 3 jaws � Sizes: 630 mm
� With extra large through hole � INCH serration or Metric serration � Chuck body and internal parts case hardened
� 3 jaws � Sizes: 140 - 315 mm
� With large through hole � INCH serration or Metric serration � Proofline® - chucks = fully sealed – low maintenance
� Centrifugal force compensation � 3 jaws � Sizes: 225 mm
� With large through hole � INCH serration / Metric serration or tongue & groove
� Proofline® - chucks = fully sealed – low maintenance
� 3 jaws � Sizes: 220 - 320 mm
� With large through hole � INCH serration or Metric serration � Chuck body and internal parts case hardened
� 2, 3 or 4 jaws � BHD-FC, BHM-FC: Centrifugal force compensation
� HFKN-D,-M: Wedge bar design � Sizes: 110 - 800 mm
� Wedge hook chucks closed center � INCH serration or tongue & groove � 2 or 3 jaws � RAN: Pull-down effect of inclined master jaw movement
� CL-C: Extra long stroke � Sizes: 80 - 400 mm
� Wedge hook chucks closed center � Sealed against swarf and chips � INCH serration, tongue & groove or Module 2 serration
� Ideal for vertical machines � 3, 4 or 6 jaws � IL-D,-C: Extra long stroke � IR-C: With individual jaw regulation � Sizes: 500 - 2500 mm
� Wedge hook chucks closed center � Centrifugal force compensation � INCH serration / Metric serration or tongue & groove
� Ideal for vertical machines � Proofline® - chucks = fully sealed – low maintenance
� 3 jaws � NTL-D,-M,-C: Extra long stroke � Sizes: 170 - 1000 mm
� Wedge hook chucks closed center � INCH serration / Metric serration or tongue & groove
� Ideal for vertical machines � Proofline® - chucks = fully sealed – low maintenance
� 3 jaws � APL-D,-M,-C: Extra long stroke � Sizes: 170 - 1000 mm
� Wedge hook chucks closed center � INCH serration / Metric serration or tongue & groove
� Suitable for vertical machines � For chucking parts � 2 or 3 jaws (4 jaws only Ø 400) � AL-D,-M: Extra long stroke � Sizes: 125 - 400 mm
� Wedge bar manual chuck � Quick jaw change � High concentricity and repeatability � Jaws can be radially adjusted and reversed � With and without sealing, 3 jaws � HG-N: Jaw system SMW (Reishauer)
Straight serration � HG-F: Jaw system Forkardt
Inclined serration � Sizes: 160 - 630 mm
� Manual face plate � Closed center � Tongue & groove � Manual clamping and radial setting of jaws
� 4 jaws � Sizes: 1000 - 2000 mm
� Pull-down chuck with active pull-down � Self centering or compensating clamping
� Floating or rigid jaws � Proofline® - chucks = fully sealed – low maintenance
� 2 or 3 jaws � TSF-RM, TSR-RM: Quick jaw change with pallet system
� Sizes: 135 - 650 mm
� Pull-down chuck with active pull-down � Self centering or compensating clamping
� Floating or rigid jaws � Proofline® - chucks = fully sealed – low maintenance
� 3 jaws � Sizes: 220 - 320 mm
� Premium Steady rests line - Narrow � Narrow arms for crankshafts � Integrated coolant / air flush chip quard � Stroke control via proximity switch or linear stroke control
� Coated body � Safety valve � Proofline® - steady rest = fully sealed – low maintenance
� Grinding steady rest � Horizontal and vertical fine adjustment of the grinding center
� Retractable Steady Rest arms � Port for compressed air against dust and coolant
� Central lubrication � Monitoring via proximity switches � Ideal for follow down grinding
� Premium Steady rests line - Compact � Integrated coolant / air flush chip guard � Stroke control via proximity switch or linear stroke control
� Coated body and safety valve � KA: Double guided arms to carry heavy loads, exenter fine adjustment on the outer arms
� Proofline® - steady rest = fully sealed – low maintenance
� Premium Steady rests line � Integrated coolant / air flush chip guard
� Stroke control via proximity switch or linear stroke control
� Coated body � Safety valve � Proofline® - steady rest = fully sealed – low maintenance
� SRA: Additional pivoting upper arm
� Premium Steady rests line � Integrated fine adjustment of the center line
� Integrated coolant / air flush chip guard
� Stroke control via proximity switch or linear stroke control
� Coated body � Safety valve � Proofline® - steady rest = fully sealed – low maintenance
� Basic and Standard Steady rests line � Stroke control via proximity switch or linear stroke control
� Chip guard � Central lubrication � Safety valve � Port for compressed air � SLU-X: Proofline® - steady rest = fully sealed – low maintenance
� SLUB: With side mounted cylinder � SLU-A: Additional pivoting upper arm
� Hydraulic front-end chucks � INCH serration � Hydraulic oil supplied through the machine spindle or tube bundle
� 3 or 4 jaws � Case hardened body � HYDL-S: Long stroke � Sizes: 180 - 800 mm
� Extra large through hole - BIG BORE � INCH serration � With rapid and clamping stroke (ES) � BB-AZ2G: Self centering / compensating � BB-FZA2G: 6 jaws (3+3) � BB-SC: Spring clamp, Proofline®-chucks = fully sealed - low maintenance
� SF-RAZ: Hydraulic Ring indexing chuck � Sizes: 400 - 1050 mm
� Pneumatic front-end chucks � Extra large through hole � Built-in pneumatic cylinder � INCH serration � 3 jaws � SP-ES: With rapid and clamping stroke � SP-L: Long jaw stroke � Sizes: 125 - 350 mm
Closed center power chucks
Diaphragm chucks Front-end chucks Self-centering steady rests
Pull-down chucks | Indexing chucks | Shaft chucks | Compensating chucks | 6 jaw 2+2+2 chucks