product news self-monitoring temperature sensor with long ...sensor with long-term stability....
TRANSCRIPT
product news
TAD with hygienic connection, for CIP and SIPapplications
sensor with long-term stability.Self-monitoring temperature
Integrated temperature decoupling andhygienic connection, for CIP and SIP.
Accuracy 0.2 K from -10...100 °C,0.3 K from 100...150 °C.
Transmitter with backup functionand drift monitoring.
Configurable diagnosis, evaluatedvia a separate diagnostic output.
Temperature range from -10...150 °C,peak temperatures between -25...170 °C.
No calibration necessary –just fit and forget!
No more calibrationIn many applications of the food and pharmaceuticalindustries the temperature sensors used must be cali-brated regularly, which is very time-consuming and ex-pensive. This is no longer necessary with the temperaturesensor presented here.The use of two different sensor elements that monitoreach other in the process ensures that a developing sen-sor drift is detected and reliably diagnosed. Further-more, if one element fails, the process continues withthe second measuring element (backup function).Via the diagnostic output of the sensor possible errorstates are directly transmitted to the higher-level con-troller. Calibration, if required at all, is condition-based.
Flu
id s
enso
rs a
nd
dia
gn
ost
ic s
yste
ms
bus,identification
and control systems
fluid sensorsand diagnostic
systems
positionsensors
and objectrecognition
E33001
E33002
E33021
E33022
PC / EPS programming interface set ZZ0050
20...32
4...20
6 / 13
-10...150
50
± 0.2± 0.3
± 0.2± 0.3
< 0.05
250
Temperature sensors
Flu
id s
enso
rs a
nd
dia
gn
ost
ic s
yste
ms
For further technical data please go to: www.ifm-electronic.com
ifm a
rtic
le n
o. 7
5111
28 ·
Prin
ted
in G
erm
any
on n
on-c
hlor
ine
pape
r. ·
We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· 03
.200
6
Accessories (selection)
Type Description Orderno.
ASEPTOFLEX threadclamp 1"–1.5" (DN25-40)
ASEPTOFLEX threadclamp 2" (DN50)
ASEPTOFLEX threadVarivent D 50 (DN25 / 1")
ASEPTOFLEX threadVarivent D 68 (DN40–125 / 1.5"–6")
Advantages and customer benefits
• High-precision, redundant measuring elementsThe TAD temperature sensor has two high-precisionand long-term stable measuring elements that guar-antee the safety and quality of your process.
• Standardised analogue signal plus additionaldiagnostic outputThe temperature-proportional 4...20 mA signal en-ables processing via all common controllers and allowsscaling for the respective temperature range.An additional output provides the information “driftwarning threshold reached” or “drift alarm thresholdreached”. The respective thresholds can be presetindividually using software. ifm guarantees a reliabledrift detection within the preset drift thresholds for aperiod of 5 years!
• Backup functionThe analogue output provides an output signal thatrepresents the average of both measuring elements.When one sensor element fails, either the analogueoutput is automatically switched to the still func-tioning measuring element or an alarm can be gener-ated. The behaviour in case of a measuring elementfailure can be configured individually using software.
• Integrated hygienic connectionThe integrated ASEPTOFLEX adapter thread (TAD161,TAD961) enables hygienic connection to all commonprocess adapters. As an alternative, a version withG 1/2 thread (TAD171, TAD971) and the correspondingwelding adapter is available. The shape of the probeand the temperature decoupling allow cleaning (CIP)and sterilisation when mounted (SIP).
• High protection ratingThe completely sealed housing guarantees protectionrating IP 69 K. The selected design reduces the build-upof dirt and can be cleaned all round.
• Parameter setting The measured values can be displayed via the optionalprogramming set and the parameters, e.g. scaling ofthe analogue output, threshold for drift warning anddrift alarm, etc. can be optimised for the process orthe application.
Common technical data
Operating voltage [V]
Analogue output (scaleable) [mA]
Dynamic response time T05 / T09 [s]
Medium temperature [°C]
Permissible overload pressure [bar]
AccuracyDrift monitoring (-10...100 °C) [°C]Drift monitoring (100...150 °C) [°C]
AccuracyAnalogue output (-10...100 °C) [°C]Analogue output (100...150 °C) [°C]
Resolution [°C]
Current rating [mA]
Self-monitoring temperature transmitterTAD
Description Orderno.
Temperature transmitter / 40 mm TAD961
Temperature transmitter / 100 mm TAD161
Products
Sensor / Probe length
Temperature transmitter G1/2 thread, 40 mm TAD971
Temperature transmitter G1/2 thread, 100 mm TAD171
Diagnostic output (binary) PNP / NPNConfigurable
Welding adapter ball E30055
Welding adapter collar E30056