Front hopper

TF 1512 Product information

The TF 1512 front hopper completes KUHN’s range of front hoppers. It is a versatile tool that couples to mechanical and pneumatic seed drills, precision seed drills and tillage machines: one single hopper for seeding, fertilisation and cover crop planting functions.

Technical specifications Front Hopper

TF 1512 Support frame

TF 1512 Front packer frame

Transport width (m) 2.5 Approx. Weight with frame (kg) 745 785 Hopper capacity (with extension) (l) 1500 (2000) Payload (kg) 1800 Loading height (cm) 135 165 Dimensions of opening (cm) 210 x 124 Distribution Centralised volumetric metering unit with electric drive Electronic control QUANTRON S2 or ISOBUS LED work lights 2, As standard Metering unit and hopper lighting As standard Hatch above metering unit As standard Front and side signalling As standard Retractable step As standard Parking stands As standard

UNIVERSAL METERING UNIT

The VENTA volumetric fluted metering unit is capable of delivering seeds and fertiliser with no additional equipment.

Its electrical drive system makes it possible to modulate application rate during operations, either manually or with a prescription map.

CONNECTED

The TF 1512 is available in QUANTRON S2 and ISOBUS versions with or without terminal to adapt to any tractor configuration.

The double display of the ISOBUS CCI 1200 terminal is perfectly adapted to combinations like the TF 1512 with PLANTER 3 or MAXIMA 3 precision seed drills.

MODULARITY

In order to adapt to operating conditions, the TF 1512 can be coupled to a front packer with wheels to press the soil down between the tractor wheels or to a support frame when no tamping is necessary. In both cases it is possible to add weights to improve balance between the tractor and the tool.

KUHN S.A. 4, Impasse des Fabriques – BP 50060 – F-67706 Saverne CEDEX 920275 GB 10.2017

Information given in this document is only for information purposes and is non-contractual. Our machines are in compliance with regulations in force in the country of delivery. In our literature, and for improved illustration of certain details, some safety devices may not be in operating position. When operating these machines, these devices must be in position in accordance with the requirements indicated in the operator’s manuals and assembly manuals. Respect the tractor gross vehicle weight rating, its lift capacity and maximum load per axle and tyres. The tractor front axle load must always comply with the regulations of the country of delivery (In Europe, it must reach minimum 20 % of the tractor net weight). We reserve the right to change any designs, specifications or materials listed without further notice. Machines and equipment in this document can be covered by at least one patent and/or registered design. Trademarks cited in this document may be registered in one or several countries.