product guide jv300€¦ · product guide stunning beauty & outstanding speed up to 112.5 sqm/h...
TRANSCRIPT
Mimaki Europe B.V.Sign Graphics Products
Product Guide
Stunning Beauty & Outstanding Speed
Up to 112.5 sqm/hWorking with SS21 / ES3 / BS3 / SB53 inks
The information in this document is subject to change without notice.
02-10-2014Ver1.35_EU
Mimaki Europe B.V.Sign Graphics Products
Terms of use
• The contents of this presentation are intended only for Mimaki authorized resellers. Authorized persons are not permitted to distribute, copy or change this presentation without explicit approval of Mimaki Europe B.V.
• Contents and technical explanations in this presentation are based on the test results achieved at Mimaki at the time of testing and are not a guarantee for performance. Substrates should be tested beforehand.
• In addition, the contents in this presentation do not lead to any legal obligations from Mimaki and Mimaki does not take any responsibility. Please verify in advance whether your intended prints will result in sufficient quality.
• Contents of this presentation are subject to change without prior notice for improvement. Compositors errors reserved.
Mimaki Europe B.V.Sign Graphics Products
Key Features - Stunning image Quality
• Minimum drop size of 4pl• Gives high quality printing results• For printing small details and smooth gradations
• Wide range of brilliant colors• SS21, Orange ink delivers vibrant colors and an larger color gamut• SS21, Light-black ink gives smooth shades of grey• SS21, White ink ensures high opacity on transparent media
• Mimaki’s original technologies to perform high quality printing• Smooth gradations, by optimum waveform control and precise dot placing
technology• Optimized dot gain control, by the 3way intelligent heater• MAPS3, Mimaki Advanced Pass System 3, eliminates banding and
produces an smooth print density
3
Mimaki Europe B.V.Sign Graphics Products
Key Features - Outstanding Speed
• High productivity with a staggered dual-head layout • 2 print heads, aligned in staggered formation, performing wide
band printing
• Maximum drop size of 35pl • Enables high speed & high density printing
• High speed printing • Accomplished by the fast drying SS21 inks and the 3-way
intelligent heater system
• High color reproductions & high density printing without bleeding
4
Mimaki Europe B.V.Sign Graphics Products
Key Features – High efficiency
• Supports 4 different ink types• SS21, ES3(tbd), BS3 and SB53
• Waveform Control Technology • Less mist is generated, to print sharp text, lines, edges, etc.• Reducing the chance of losing nozzles• Accomplishes high accuracy dot placement
• MAPS3 (Mimaki Advanced Pass System 3)• Reduces banding, uneven drying inks, and bidirectional stripes
• NCU (Nozzle Check Unit)• Checks the condition of the nozzles automatically• Keeps the print quality at the highest level
5
Mimaki Europe B.V.Sign Graphics Products
PC
System configuration
6
Works also with:
USB 2 0 5m(15ft) cable is recommended
Connection
Including Rip software
AMF Kit MBIS3 Drying Fan Air exhaust unit Anti-static sheet Additional Pinch roller 8x Eco-cartridge for BS3 inks
Options
Recommended specificationsCPU: Core i5 3.2GHzMEMORY: 8GBHDD: 500GBUSB2.0: 4 ports or moreOptical disk drive: DVD-ROMWindows7 Professional 64bit Monitor: 1366x768
Mimaki Europe B.V.Sign Graphics Products
Ink Type / Ink Set
7
9 different ink colors
3 ink set selections
4C: High speed printing
8C: Smooth, vibrant colors
6C+WW: High density white printing
M C Y K K Y C M
M C Y K Lc Lm Lk Or
M C Y K Lc Lm W W
Capacity:CMYKLcLmLkOr:
440ml cartridge2L Ink pack, for MBIS3
White:220ml cartridge
*ES3: tbd
SS21
Mimaki Europe B.V.Sign Graphics Products
Ink Type / Ink Set
8
CapacityCMYK:
600ml Ink pack, for the Eco-cartridge
2L Ink pack, for the MBIS3
Eco-cartridge needs to be ordered extra
BS3
Colors4C :
Ink set4C : High speed printing
M C Y K K Y C M
M C Y K K Y C M
Sb53
Colors6C:
*K ink is also available
Ink set4C : High speed printing
6C : Smooth and vibrant colors
CapacityBMYKLbLm:
440ml cartridge2L Ink pack, for the MBIS3
M B Y Dk Lb Lm
M B Y Dk Dk Y B M
M B Y Dk Lb Lm B M
Mimaki Europe B.V.Sign Graphics Products
High speed printing
• Staggered dual-head design• The 2 print heads, positioned in an staggered configuration, make high
speed printing possible
9
Approx.50.8mm(2 inch)
1 2 3 4 5 6 7 8
Nozzle row lengthApprox.25.4mm(1 inch)
Nozzle widthApprox.31mm(1.2 inch)
Approx. 101mm (3.9 inch)
1-head:1440-nozzle(180-nozzle x 8-lines) Staggered Dual-head design
1 2 3 4 5 6 7 8
Mimaki Europe B.V.Sign Graphics Products
Highly versatile printer
• Larger Ink drop
• The variable dot technology, with a maximum dot size of 35pl, delivers the highest productivity of 105.9m²/h with SS21/BS3 and 112.5m²/h with SB53
• Printing with high densities, also in high speed modes
• Making it possible to print also in lower resolution print modes, like:
• 360x360 dpi
• 540x360 dpi
• 720x720 dpi
• This makes it possible to have a wide coverage, from high resolution to low resolution printing, with higher densities
10
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large21pl
Middle14pl
Small4pl
1 /360 inch
1 /360inch
Large35pl
Middle14pl
Small4pl
1 /360 inch
1 /360 inch
Low density due to an gap between the dots↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots↓
Suitable for High speed mode
Mimaki Europe B.V.Sign Graphics Products
3,7
6,9
9,0
13,4
17,6
21,4
28,4
4,3
7,9
10,4
15,4
20,2
24,6
32,7
0 20 40 60
Super Smooth1440x1440,16P,Bi
High Quality②720x1440,16P,Bi
High Quality①720x1440,12P,Bi
Standard②720x1080,8P,Bi
Standard①720x1080,6P,Bi
High Speed540x720,6P,Bi
Draft540x720,4P,Bi
JV300-160
JV300-13010,9
13,4
17,6
25,7
28,4
39,2
60,2
92,1
12,5
15,4
20,2
29,5
32,7
45
69,2
105,9
0 50 100 150
Super Smooth720x1440,10P,Bi
High Quality②720x1080,8P,Bi
High Quality①720x1080,6P,Bi
Standard②720x720,4P,Bi
Standard①540x720,4P,Bi
High Speed540x360,3P,Bi
Draft540x360,2P,Bi
Super Draft360x360,1P,Bi
JV300-160
JV300-130
Outstanding Speed, 4C, SS21/BS3
11
PVC Banner
* BS model: Only the 160 width (4C) version is availableThe print modes shown in this document, are the performance of the printer itself. The profiles are created selectively depending on the media type. When the profile is not available, use MPM II to create the profile for the media.
m²/h m²/h
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, 8C/6C+WW
• SS21, CMYKLcLmLkOr or CMYKLcLm+WW
12
PVC Banner
1,7
4,6
6,9
9,1
15,1
19,7
1,9
5,3
7,9
10,5
17,4
22,7
0 10 20 30 40
Super Smooth1440x1440,32P,Bi
High Quality720x1440,24P,Bi
Standard②720x1080,16P,Bi
Standard①720x1080,12P,Bi
High Speed540x720,8P,Bi
Draft540x360,6P,Bi
JV300-160
JV300-1304,6
6,9
9,1
15,1
19,7
29,5
43,9
5,3
7,9
10,5
17,4
22,7
33,9
50,5
0 20 40 60 80
Super Smooth720x1440,24P,Bi
High Quality720x1080,16P,Bi
Standard②720x1080,12P,Bi
Standard①540x720,8P,Bi
High Speed540x360,6P,Bi
Draft540x360,4P,Bi
Super Draft360x360,2P,Bi
JV300-160
JV300-130
m²/h m²/h
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, SS21 White ink
• SS21, CMYKLcLm+WW
• 1, 2 and 3-Layer printing, with fast drying SS21 ink
• Color – White – Color, in 1 go
• Printing white ink only, with an maximum print speed of 10.5 m²/h
13
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, SS21 White ink
14
0,3
0,7
1,1
2,0
0,3
0,8
1,3
2,3
0 1 2 3 4 5
Super Smooth1440x1440,32P,Uni
High Quality720x1440,32P,Bi
Standard720x1080,24P,Bi
High Speed720x1080,18P,Bi
JV300-160
JV300-130
1,3
3,4
6,2
9,1
1,5
3,9
7,1
10,5
0 5 10 15
Super Smooth1440x1440,32P,Uni
High Quality720x1440,32P,Bi
Standard720x1080,18P,Bi
High Speed720x1080,12P,Bi
JV300-160
JV300-130 0,4
1,1
2,0
2,7
0,5
1,3
2,3
3,1
0 1 2 3 4 5
Super Smooth1440x1440,32P,Uni
High Quality720x1440,32P,Bi
Standard720x1080,18P,Bi
High Speed720x1080,14P,Bi
JV300-160
JV300-130
1-layer printing, white only 2-layer printingColor→White / White→Color
3-layer printingColor → White → Color
m²/h m²/h
m²/h
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, Sb53 inks
• Sb53 4C and 6C printing speeds
15
4,6
6,9
9,1
15,1
21,1
31,9
50,5
5,3
7,9
10,5
17,4
24,3
36,7
58
0 20 40 60 80
Super Smooth720x1440,24P,Bi
High Quality720x1080,16P,Bi
Standard②720x1080,12P,Bi
Standard①540x720,8P,Bi
High Speed②540x360,6P,Bi
High Speed①540x360,4P,Bi
Draft360x360,2P,Bi
JV300-160
JV300-13010,9
13,4
17,6
25,7
28,4
42,3
62,6
97,9
12,5
15,4
20,2
29,5
32,7
48,6
72
112,5
0 50 100 150
Super Smooth720x1440,10P,Bi
High Qulaity720x1080,8P,Bi
Standard②720x1080,6P,Bi
Standard①720x720,4P,Bi
High Speed②540x720,4P,Bi
High Speed①540x360,3P,Bi
Draft540x360,2P,Bi
Super Draft360x360,1P,Bi
JV300-160
JV300-130
BMYDk(K) BMYDk(K)LbLm
m²/h m²/h
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, Sb53 inks
• 2 different types of black ink• 2 types of black ink are offered to meet customer's demand
16
Type Advantage Disadvantage
Sb53-K
• Less smoke generation, during heat transfer
• Less grainy results can be seen at the low gradation areas
• When printing with 100%, the density is the same as Dk ink, but the density is lower in the areas with low gradations
Sb53-DK• Reflection density is higher at the
low gradation part
• Grainy results can be seen at the low gradation areas
• More smoke generation during heat transfer, compared to the K ink
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• New orange ink with SS21
• Wider gamut with new Orange ink
• Orange ink is added as an process color
• Covering approx. 94.8% of the PANTONE coated color chart, with only CMYK it is 93%
• The large color gamut makes it easy possible to reproduce corporate colors, etc.
17
M C Y K Lc Lm Lk Or
Mimaki Europe B.V.Sign Graphics Products
-120
-100
-80
-60
-40
-20
0
20
40
60
80
100
120
-120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120
CMYKLcLmLkOr
CMYK
PANTONE近似色
Stunning Quality
• SS21 with Orange ink
18
High reproducibility with bright, fresh
Orange
Less freshness without Orange ink
CMYKLcLmLk+OrCMYKLcLm
Gamut comparison Comparing print results
*PANTONE solid chips coated(1085 colors)
Colors of PANTONE
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• SS21 with Light-black ink• High quality Monochrome color reproduction with the new Light-Black ink• High color balance without color shifting, reproducing high quality
monochrome smooth and clear grey output
19
CMYKLcLmLkOrCMYKLcLm
• Clear grey• Smooth skin
• Reddish grey• Skin w/grainy
appearance
• Reddish grey • No color shade
Print result comparison
CMYKLcLmLkOrCMYKLcLm
Print result comparison
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• High density White ink• Vivid color printing even on transparent/colored media
• By under-laying white ink before printing the colors
• Higher opacity, is attained by using an larger ink droplet
20
Transmission density: 0.4
JV300-160
Transmission density: 0.27
Older generation printers
Density comparison (White - single layer)
Density: 48% UPProductivity: 430% Up
Print mode: 720x1440,32P,Bi Productivity: 3.8m²/hMedia: PET
Print mode: 720x1440,32P,Bi Productivity: 0.9m²/hMedia: PET
*White – 200% print*Light-up, Mimaki logo underneath
Mimaki Europe B.V.Sign Graphics Products
• Waveform Control Technology for high quality printing
• High accuracy dot placement• Jetting ink drops in straight lines, with almost a perfect circle dots,
that accomplishes high accuracy dot placement
• Generating, less mist • Printing clear and sharp letters, lines, edges, etc.
• Waveform is optimized, to minimize the cause of missing nozzles
Stunning Quality
21
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
22
Ink dots do not overlap and gives an accurate dot placement
↓No grainy appearance
Ejects ink in straight lineswith a near-perfect circle
Ejects ink not straightly and not with a perfect circle
Ink dots overlap and no accurate dot placement
↓Grainy appearance and uneven density
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• Variable Dot Technology• Printing with 3 different dot sizes, small, medium and large• Delivers the high image printing quality, with very smooth gradations• 3 different drop sizes are selected from 4pl/7pl/8pl/14pl/16pl/21pl/29pl/35pl,
depending on the type of ink and the selected print mode• This allows printing in not only high resolution printing, for high quality, but also
high speed & density printing for high productivity!
23
Variable dot
Normal dot
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• 3Way Intelligent Heater plus Top Blower• Optimizes the dot gain• Generates a higher print quality without bleeding, by a quick and accurate ink dot
fixing, by heating the media to a perfect temperature, through the Pre- and Print heaters
• The Post-heater provides additional drying after printing• The top blower assists drying the ink on the media surface, to support high
speed/density printing
24
3-way Intelligent Heater patent No.
Japan 4889059
USA 8.444.262
China ZL 200910222559.8
Top blower
Pre-heater
Post-heater
Heater coverPrint-head
Pinch roller
Grid roller
Print- heater
Larger Post-heater to ensures faster drying
Incorporated Air-flow path to support faster drying
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• MAPS3 (Mimaki Advanced Pass System 3)• MAPS3 prints passes in gradation-like tone, by dispersing ink drops between the
passes, which reduces banding, uneven drying ink, and bidirectional stripes• MAPS3 works in the higher pass modes of an resolution
25
Normal PassMAPS3
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NCU (Nozzle Check Unit)• Stable printing quality, by preventing printing with clogged
nozzles
• NCU checks the nozzle condition automatically per transferred file or the set print length
• Avoids printing with missing nozzles
• When nozzles are clogged, the cleaning is then started automatically
• When the clogged nozzle is not recovered by cleaning, the Nozzle Recovery System is then automatically done, and printing starts
26
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NCU (Nozzle Check Unit)
27
Light emitter Receiver
Print headInk ejection by each nozzle line
Sensor:Receiver detects a light→ no ejecting→Cleaning
Image of NCU function
Nozzle check duration: 6-sec./checkNozzle check ink consumption: 5.3 cc/year**Operating Condition: One check/hour x 10-hour operation/day x 240-day
*1 Timing for the nozzle check can be set, by hourly cycle
NCU operation flow
Checks nozzles
Nozzle recovery is then automatically set
Start printing
Warning (Standby)
Yes
No
All nozzles are checked per nozzle line
When missing nozzles could not be recoveredafter retrying cleaning.
The number of the retrying cleaning can
be customized.
Nozzle MissingYes/No
Cleaning is done automatically
Nozzle check setup
1. After printing, one file2. After printing, the set print length
When the number of missingnozzles is higher than the number
in the setup
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NRS (Nozzle Recovery System)
• Increases the uptime
• Replaces missing nozzles, by working nozzles in other passes
• No need for direct service intervention
• Makes printing with the same quality possible, even if nozzles are missing
28
Continuous printing by NRS
Continuous OperationDown Time
Mimaki Europe B.V.Sign Graphics Products
• NRS (Nozzle Recovery System)
Continuous Operation
29
• 10 nozzles can be registered per 1 nozzle line • NRS is not changing the printing speed• NRS is not working when:
• Printing in low pass modes• Printing in some modes with MAPS3 • The position of the nozzle is not correct
Register the number of missing nozzles
Replacing the clogged nozzle, by using a other working nozzle
Nozzle check pattern
Clogged/Missing nozzles
Mimaki Europe B.V.Sign Graphics Products
• Automatic Wiper Cleaning
• The ink on the wiper is automatically removed during the cleaning procedure of the printhead
• No pollution on the print head caused by ink residue from the wiper
• Easier daily maintenance as the wiper is cleaned automatically
Continuous Operation
30
1. Washing liquid
2. Wipe out
Wiper Cleaner
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Event Mail Notification • Various information can be sent from printer via email• Read the status of the printer on remote locations, allowing unattended
printing
31
USB
RIP-PC Mobile phone
Print start/completedError/Warning
Internet Receiving Mail
LAN
Event Mail function will be available from end 2014
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• MCT (Mimaki Circulation Technology)• Stable white ink supply to the printheads• Circulating the white inks in the ink line system • Preventing the settlement of pigments • MCT works only when the white inks are installed
32
Circulates the white ink through the lines
Ink lines
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Pu
mp
Pu
mp
Ink lines
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Ink Supply Systems• UISS*(Uninterrupted Ink Supply System)
• In 4C ink-set, when the ink runs out, ink is automatically supplied from the other cartridge for continuous operation
• Not available with 6C/8C ink-set
• Non-Stop Ink replacement• Working with the 4C ink-set, an empty ink cartridge can be replaced with a
new one, without stopping the on-going print job• No waste of time and media or ink• When using the Sb53 6C ink set, UISS works with M and Bl• Not available with 6C+WW and 8C ink sets
• Optional, MBIS3 (Mimaki Bulk Ink System III)• Large volume, 2L ink packs, are placed directly on to
the ink station• Making it possible to print, continuous large print jobs• The new MBIS3 on the printer saves working space,
and large 2L ink pack saves running cost
33
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Media feeding and take-up system• Stable Feeding/Take-up for heavy-weight media• Smooth handling of various medias are supported by the new Feeding/Take-up
system• max. Weight of 40kg• max. diameter of 250mm
• Convenient media installation• Media stand
• The media stand is available for both, feeding and take-up unit• Supporting installing and removing of heavy media rolls
34
At rear side At front sideMedia stand
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• High media feeding accuracy
• Compensates for diameter changes of the take-up roll
• Adjustable pinch roller
• Adjust the number of pinch rollers, to be used, depending on the width and type of media
35
Pushing down the pinch roller Lifting-up the pinch roller
Mimaki Europe B.V.Sign Graphics Products
Optimize Work Efficiency
• Highly Visible Design of the Machine• Color LCD Control Panel
• Display size of 52.56mm x 70.08mm • Allowing easy setup and control
• The Status LED• LED status lamp indicates the status of the printer• Easy to see from an distance
36
Various information is displayed in a graphical manner, such as media width, heater temperature and remaining ink
Status LEDBlinking in Blue: Normal operationBlinking in Red: Needs attention
Mimaki Europe B.V.Sign Graphics Products
Stable printer
• Lift up block
• By attaching the Lift Up Block to the casters of machine
• Prevents the shaking of the machine while printingwith lift up block
Mimaki Europe B.V.Sign Graphics Products
Rip software, RasterLink6
Frequently used setting can be registered as “My Favorite”. Up to 30 settings can be registered.
Intuitive Operation New Advanced Functions
The main information is in one screen. The status of printer, the progress of ripping, the status of job can be checked at a glance. Nesting or composition of job are displayed visually.
1
The visual icons on the right side of the screen allows for the easy and quick setting of the print condition.
2
3
・Batch printing“Test the best profile when trying to print on
media which has never been used before”
・3-layer printingSimultaneous 3-layer printing(Color → White → Color)
・Convenient functionsEstimated Completion Time displayEnhanced layout functionPrinter Status display
The web update is available as well as RasterLinkPro5 which has been well received.The program update and the profile download can be done through the web easily
Web Update function
Mimaki Europe B.V.Sign Graphics Products
Advanced Features
• Multi-color matching Input Profile• The Multi-color matching profile “WideMimaki2013forSign” has a wide color
reproduction range in the orange area• It generates brilliant color reproductions with a higher intensity• WideMimaki2013forSign, is based on the “WideMimakiCMYK” with the
enlargement of general color reproduction domain for a wider color reproduction of orange area.
• Light colors, like skin color or pastel colors will be brighter. It is recommended to confirm the result with a test print as the color reproduction will differ from “WideMimakiCMYK”
39
WideMimakCMYK WideMimaki2013forSign
Gamut viewer: X-Rite ProfileMaker
Mimaki Europe B.V.Sign Graphics Products
Options
• AMF Kit- tension bar for the take-up system
• Advised to order, when printing on higher speeds
• OPT-J0360 for JV300-130
• OPT-J0359 for JV300-160
• MBIS3 – Mimaki bulk ink system
• OPT-J0364 for JV300 series
• Anti-static sheet
• OPT-J0357 for JV300-130
• OPT-J0355 for JV300-160
Mimaki Europe B.V.Sign Graphics Products
Options
• Additional Pinch roller
• OPT-J0376 for JV300-130
• OPT-J0362 for JV300-160
• Drying Fan
• OPT-J0352 for JV300-130
• OPT-J0351 for JV300-160
• Air exhaust unit
• When ordering the Air exhaust unit, the Drying fan needs to be ordered also
• OPT-J0354 for JV300-130
• OPT-J0353 for JV300-160
• Eco-cartridge needed for BS3 inks
• OPT-J0361, 1 set of 4 eco-cartridges, order 2 sets
Mimaki Europe B.V.Sign Graphics Products
Cautions:1. Do not install on the weak surface floor2. Make sure to use in a ventilated environment
Environmental temperature: 20°C ~ 30°CQuality assurance temperature: 20°C ~ 25°C
Humidity: 35~65%Rh (no condensation)Temperature gradient: +/- 10°C/h or less
Dust: Equivalent to office environment3. Do not install on carpets, etc because those are easy to be
charged, and it can effect the image quality4. Ink odor. Please use the machine in a well-ventilated
environment5. Do not install in the place where using a photograph fixer or
the place with acid steam like acetic acid, hydrochloric acid
Packing / Installation condition
• Packing conditions
• Installation conditions
42
Model Width Depth Height WeightManpower for
installationPer
Container
JV300-130 2662mm750mm 1050mm
222,9kg4 people
20ft: 12-unit40ft: 24-unitJV300-160 2912mm 238,5kg
*Installation space for PC is required separately
Mimaki Europe B.V.Sign Graphics Products
Specifications
43
JV300-130 JV300-160
Print head On-demand piezo head (staggered dual-head)
Resolution 360 dpi,540 dpi,720 dpi,1440 dpi
Drop size Min. 4pl, Max.35pl
Head height 2.0mm/2.5mm/3.0mm (+1.0mm or +2.0mm) * manual adjustment
Ink type SS21 / ES3(tbd) / BS3 / SB53
Ink color SS21: C,M,Y,K,Lc,Lm,Lk,Or,W / BS3: C,M,Y,K / SB53: B,M,Y,DK,Lb,Lm
Ink capacity SS21: 440ml cartridge / 2L ink pack (White:220ml cartridge only)BS3: 600ml ink packSB53: 440ml cartridge / 2L ink pack
Max. printing width Max.1,361mm (53.5”) Max.1,610mm (63.3”)
Max. media width Max.1,371mm (53.9”) Max.1,620mm (63.7”)
Media thickness 1.0mm (0.039’”) or less
Roll weight 40kg (88lb) or less
Outside dimension 2541mm(W)x707mm(D)x1392mm(H) 2793mm(W)x707mm(D)x1392mm(H)
Packing size 2,666mm(W)x750mm(D)x1,050mm(H) 2912mm(W)x750mm(D)x1050mm(H)
Body weight 170.6kg (376lb) 182.4kg (402lb)
Power supply 2x Single phase (AC100~120V/220~240V +/-10%) 50/60Hz±1Hz
Power consumption 100V max 2x 1440W / 220V max 2x 1920W
Applicable standards VCCI class A / FCC class A / UL60950-1ETL / CE Marking(EMC, Low Voltage and Machinery) CB report / RoHS / REACH・CCC(pending)・Energy Star
Mimaki Europe B.V.Sign Graphics Products
# Questions Answers
1 Is the NCU the same as that of the JV5? No, it isn't. The NCU of the JV5 checks the nozzles while scanning and the NCU of JV300 does not
2 How the coverage ratio of PANTONE color chart measured? Comparison of the gamut size
3 What is the coverage ratio of PATONE color chart when using 4C(CMYK)?
93%
4 Can MBISⅡ be used for JV300? Yes it can, but the use of MBIS3 is recommended
5 Can MAPS3 be used for JV33? Not possible.
6 The resolution of 540x1080 is not available? No it is not. Because even if the image quality is same as 720x720, the scan speed is slower.
7 How is the outdoor durability of the Orange ink? Almost the same as for Magenta.
8 Is the ink set of CMYKLcLm available? No, because the print speed is same as CMYKLcLmLkOr.
9 Is the ink set of CMYKOrLkWW available? No.
10 Is JV300 compliant with RL5? No, only with RL6.
11 Does NCU work when using other company’s RIP? Yes, it does.
12 Can ink be changed from BS3 to SS21, or SS21 to BS3? Not possible. Only possible to change from e.g. CMYK to CMYKLcLmLkOr
13 Can the ink be changed from Sb53 to SS21, or SS21 to Sb53? Not possible. Only possible to change from e.g. CMYK to CMYKLcLmLkOr
14 Is JV300 compliant with Ethernet? No, it isn’t. The LAN port is for Event Mail Notification.
15 What’s the minimum drop size of sublimation ink,Sb53? 8pl.
16 Can MAPS3 be turned off? It is controlled internally by the firmware
FAQ-1
44
Mimaki Europe B.V.Sign Graphics Products
# Questions Answers
17 What is the compliant version of RL6? Ver.3.0 or later
18 What is the compliant version of driver? Ver.4.0 or later
19 What is the compliant version of F/W? Ver.1.3 or later
20 What is the compliant version of MPMⅡ? Ver.4.00β3 or later
21 Does JV300 has common options with JV33? No.
22 Can drop sizes be selected by the user? No. The best combination of the drop sizes are selected by Mimaki HQ for each ink type and each resolution. The combination is fixed, so the user cannot customize
23 How much does the drying of ink improve by using a top blower? Of course the drying of the ink is improved, but the main role of the top blower is to control the dot sizes.
24 What is the minimum drop size using BS3?Can 4pl be used for BS3?
The minimum drop size for BS3 is 7pl. For the stable ink ejection, the drop size of 4pl is not used.
25 When one of the print head broken, can print be continued only using the other print head?
Yes. It will be available in feature.
26 Can ink type be changed? No it cannot. The ink set can be changed in the cases below.SS21:4C⇔8C Sb53:4C⇔6C
27 What is the height of the JV300 printer with the MBIS3 attached? 1,845mm
45
FAQ-2