product catalogue · fragranite sinks are made from 80% quartz and 20% methylmethacrylate (resin)....
TRANSCRIPT
KITC
HEN
SYST
EMS
PRO
DUCT
CAT
ALO
GUE
2015
/201
6
PR Kitchen & Washroom SystemsKitchen Systems83 Bangholme RdDandenong SouthVIC 3175AustraliaPhone +61 3 9700 9100Fax +61 3 9700 [email protected]
KEY TO SYMBOLS
Inset sink
Undermount sink
Flushmount sink
Left-hand drainer (LHD)
Right-hand drainer (RHD)
Sink features Franke hygienic waste(cannot install waste disposer)
18/10 Stainless steel
Minimum cabinet size (in mm)
Accessories included with sink model
Accessories available for sink model
Special order
Pull-out tap
Swivel tap
Flexi tap
Veggie spray
Tap with light
600
PRODUCT CATALOGUE2015/2016
/HW
FEATURE ICONS
Franke sinks are Food Preparation Centres. The benchtop space is maximised by utilising accessories such as chopping boards, strainer trays, strainer bowls and rollamats.
18 10 StainlessSteel
18/10 means that there is 18% chromium and 10% nickel. This stainless steel is 304 grade which is commonly referred to as surgical grade and is used for maximum durability.
Fragranite sinks are made from 80% quartz and 20% methylmethacrylate (resin). The quartz sand, which is fired at high temperature, is colour-pigmented.
Lift the plug in your Franke sink without putting your hands in the water by twisting the elegant stainless steel knob.
Franke maximises space in your under bench cupboard by designing most of the sinks to have wastes to the rear of the main bowl.
The stainless steel clips are welded to the side of the bowl and rail. The installer only needs to put silicone on the cut-out edge and push the sink into the cut-out.
Franke hidden overflow is designed to ensure that the sink never overflows. Franke looks for Kitchen Solutions with practicality, the best hygienic levels and the best cosmetic look.
SoundDeadening
Pads
Sound deadening pads are installed to reduce noise levels when pouring or running water into the sink.
Franke Bowl Insulation
The Franke sprayed bowl insulation is designed to reduce noise levels when pouring or running water into the sink, maintain hot water longer and avoid condensation outside the bowl.
HygienicIntegrated
Waste
Franke’s hygienic waste features elegantdesign, reduced bacteria build-up on curved edges and easy waste fitting installation.(Food waste disposer cannot be fitted to hygienic waste outlet)
All laser-cut edge profile sinks have a rail system on the underside of the sink to slide clips into the correct location that the installer needs them to ensure a secure fit.
Laser-EdgePro�le
The laser-edge profile is a slim profile for inset sinks at the benchtop, providing easy cleaningand a flushmount appearance.
IntegratedSealing
Strip
Franke sinks with integrated sealing strip ensure sinks are water sealed with a factory - applied, inert polyurethane sealant on the underside of the rim edge.
FlushmountFit
Flushmount sinks feature a single thickness edge allow a slimfit to the benchtop which can also be recessed resulting in a flush fit with the surface.
Fast FixInstallation
System
FrankeHiddenOver�ow
Franke Kitchen Systems is the world’s leading provider of intelligent systems for domestic kitchens, trusted by more users in more kitchens worldwide than any other manufacturer. Drawing on our long history of reliability and expertise, we build rewarding and enduring partnerships.
We help our partners enhance their businesses and ease their customer's lives by making work in the kitchen a pleasure.
By adopting a policy of investment in innovation and technology, Franke has established their position as the largest stainless steel kitchen sink manufacturer in the world and a leading name in kitchen taps, waste disposers and other kitchen solutions.
AN INTRODUCTION TOFRANKE
SINKS
MODEL RANGE PG FINISH INSET FLUSHMOUNT UNDERMOUNT
ANX Aton 12-13 Stainless Steel
PFX Aurora 14-15 Stainless Steel
BFG Basis 16-17 Granite
BOX Bolero (NEW) 18-19 Stainless Steel
CEX Centinox 20-21 Stainless Steel
CMX Centinox Minimalist (NEW) 22-23 Stainless Steel
CMX Centinox Minimalist (NEW) 24-25 Stainless Steel
DRX Drina 26-27 Stainless Steel
EOX Epos 28-29 Stainless Steel
KTX Karst 30-31 Stainless Steel
KBX Kubus 32-33 Stainless Steel
KBG Kubus Fragranite 34-37 Granite
LAX Largo 38-39 Stainless Steel
MTF Mythos Fusion 40-41 Granite
NEX Neptune 42-43 Stainless Steel
PFX P Pacific Plus (NEW) 44-45 Stainless Steel
PKX Peak 46-47 Stainless Steel
LUX Rambla 48-49 Stainless Steel
SNX Sinos 50-51 Stainless Steel
SQX Steel Queen 52-53 Stainless Steel
SQX Steel Queen 54-55 Stainless Steel
LAUNDRY TUBS
MODEL RANGE PG FINISH INSET FLUSHMOUNT UNDERMOUNT
AEX Acquario Line (NEW) 57 Stainless Steel
DLT Deluxe 57 Stainless Steel
KBG Kubus Fragranite 57 Granite
SQX Steel Queen 57 Stainless Steel
SOAP DISPENSERS
MODEL RANGE PG FINISH
SD 55 Classic 59 Chrome
SD 23 Lowline 59 Chrome
SDS 371 Poco 59 Stainless Steel
SD 519 Sinos 59 Chrome
SD 319 Standard 59 Chrome
SDS 246 Tower 59 Stainless Steel
CONTENTS
TAPS
MODEL RANGE PG FINISH SWIVEL PULL-OUT FLEX
TA 7011 Active 61 Chrome
TA 7010 Active 61 Chrome
TA 6811 Angolo 61 Chrome
TA 7811 Azimut 61 Chrome
TA 7001 Artis 61 Chrome
TA 7000 Artis 61 Chrome
TA 6211 Caprice 61 Chrome
TA 5120 Centinox 61 Stainless Steel
TA 9500 Eos (NEW) 63 Stainless Steel
TA 9501 Eos (NEW) 63 Stainless Steel
TA 6800 Kubus 63 Chrome
TA 6801 Kubus 63 Chrome
TA 6201 Maxxis 63 Chrome
TA 631 Mythos 63 Stainless Steel
TA 621B Mythos Black (NEW) 63 Chrome
TA 621W Mythos White (NEW) 63 Chrome
TA 780S Niagra 65 Chrome
TA 6200 Planario Tower 65 Chrome
TA 7181 Professional 65 Chrome
TA 9101 Professional Reach 65 Stainless Steel
TA 6300 Sinos (NEW) 65 Chrome
TA 6301 Sinos (NEW) 65 Chrome
TA 6300B Sinos Black (NEW) 65 Chrome
TA 6301B Sinos Black (NEW) 65 Chrome
TA 6300W Sinos White (NEW) 67 Chrome
TA 6301W Sinos White (NEW) 67 Chrome
TA 9510 Taros (NEW) 67 Stainless Steel
TA 9511 Taros (NEW) 67 Stainless Steel
TA 7300 Verona 67 Chrome
TA 7311 Verona 67 Chrome
TA 7301 Verona 67 Chrome
TA 6831 Pyra 68 Chrome
TA 6841 Pyra Light 68 Chrome
PRTRS0005 Protronic (NEW) 69 Chrome
TAP SUPPORT 71PLUMBING KITS 71CLEANING & CARE 71SORTER SYSTEMS 73BIN IN BENCH 73HELPFUL INFORMATION 74WARRANTY 74SUPPORT 74WEB RESOURCES 75
CONTENTS
HUMBLE BEGINNINGS
Founded in 1911, Franke was built on a foundation of precision engineering, combined with traditional craftsmanship.
Over 100 years later, those principles endure, while a focus on the changing needs and lifestyles of our customers has helped us become the world’s largest manufacturer of kitchen sinks.
Hermann Franke establishes a sheet metal business in Rorschach, Switzerland.
1911
During the First World War it is difficult to obtain materials for production. The post-war period and economic crisis delay development of the business.
1914 ▸24
Recovery of industrial and construction sectors. Addition of a sanitary installations department. Manufacture of hobs, skylights and dormer windows.
1925 ▸ 30
General slump. First sinks produced in nickeline, monel metal and later stainless steel.
1931 ▸ 34
Construction of a new factory, offices and residential building in Aarburg. 10 employees.
1935 ▸ 36
Economic upswing boosts sales. Beginning of series production and launch of first fully welded, flush mounted sink.
1937 ▸ 38
Expansion of manufacturing facilities and production of complete kitchens(Movenpick). First exports to neighbouring countries. Workforce increases to 250.
1946 ▸ 49
Many things have changed in the past century, but what is always the same is a set of values, characterised by respect, trust and openness. The values of innovation, entrepreneurship, quality and stylish design were in the heart of Hermann Franke and continue to be at the heart of the business, as we enter a second century of smart design and stunning beauty.
A CENTURY WITHOUT COMPROMISE
The Franke story began as a small sheet-metal business in Rorschach, Switzerland, established by Hermann Franke in 1911. Since then, we’ve established efficient and economic manufacturing facilities all around the world.
SWISS PRECISION ENGINEERING
HISTORY
FRANKE'S NEW APPEARANCE
Franke stands for traditional, top-quality and down-to earth products that accompany us in our daily lives. They are subject to wear and tear, and therefore need to be durable and reliable. We want to make these everyday objects, which we produce and that are in everyday use, a little less ordinary by making them more beautiful and better. That’s what Make It Wonderful stands for. That’s our brand promise and it means in summary that, whether you are a business partner or an end user, we make your everyday life a little less ordinary.
Welcome to the wonderful world of Franke. With our new branding, we want to put a smile on the face of everyone who comes into contact with our people, products and services. Our aim is not only to have a brand, we also want to live it.
Our new appearance is all about the enhancement of our strategy “One Franke, One Strategy, One Brand”. We have developed an emotional brand campaign that brings more humour, creativity and inspiration to our rather unemotional industrial environment. Hand-drawn illustrations show imaginatively staged everyday moments relating to our products. They show in a playful manner our new Make It Wonderful brand promise.
Michael Pieper (Willi Peiper's son) becomes CEO, and owner of the Franke Group in 1990. Under his leadership, rapid and systematic expansion of the core businesses worldwide takes place.
1989
Franke repositions it's strategy and structure.The divisions are given more autonomy and responsibility. Two further core businesses are identified and organised to secure and build on the success of Franke :
Franke Water Systems andFranke Coffee Systems
Many things have changed for Franke as a business over the last century. What has never changed in 100 years is the unwavering belief in product quality.
Although the product itself transformed into a single householdarticle to a lifestyle addition in a unique range of kitchen systems,the outstanding quality has been a constant.
2002
FRANKETODAY
Walter Franke's friend and business partnerWilli Pieper takes over ownership of Franke.Franke is structured into divisions in 1988.
1975 ▸ 88
Marked expansion of the Franke group.13 new subsidiaries and two license companies established in Europe. In 1972, Franke builds and installs the first kitchen for McDonald’s in Munich.
1962 ▸ 74
why make it wonderful?
FRANKE'S NEW APPEARANCE
Illustrators from all around the world have been commissioned for the brand campaign. Franke consciously opted for eight internationally renowned artists to depict the world of Franke with hand-drawn inspiring illustrations and an emotional, natural style.
Depending on the style, the artists were assigned to the various divisions within the Franke Group. With sample sketches, the artists were shown what statements and ideas need to be presented with Make It Wonderful.
The artists were then granted any freedom they wanted. There was only one requirement: Make It Wonderful! In addition to the stylistic diversity of the doodles, it was important to us to convey emotions and stories around our products. The illustrations visualise in a very creative, playful way ideas or musings of all the things that can be done with our products. Franke aims to make everyday life a little less ordinary and provide our customers with perfect support in your everyday lives with our products.
top illustrators formake it wonderful
Franke aims tomake everydaylife a little lessordinary...
TODAY
CHOOSING YOUR PERFECT SINK
bowl & drainer conf iguration
As the kitchen sink is seen as the heart of the kitchen, it’s the perfect starting point for creating your dream kitchen. Let your imagination run free with a range of fabulous options to help you maximise space and accentuate thelook of the entire room.
There are however certain functional considerations to take into account and the following information will help to ensure that your ideal sink is the perfect fit for your ideal kitchen.
The type and position of your bowl depends on how you intend to use your sink.If you like room to clean large items like grill pans, a larger single bowl may be best for you, or for a multi-functional purpose, you may prefer the versatility of 2 separate working bowls. For multi-bowl undermount sinks, it is important to decide which side you require the smaller bowl.
The drainer location is also an important consideration. For many sinks you will need to choose the specific version you prefer - with drainer on the left or right hand side. Whereas other sinks are reversible which indicates the drainer can be positioned on either side.
This brochure demonstrates the huge breadth of
styles available but in some ranges there are several configurations to choose from in the same style.
Double Bowl
1½ Bowl
Single Bowl
choose your
material
1
4
choose your
installation
2
choose your
conf iguration
2
3
choose your
accessory
bowl & drainer conf iguration
INSTALLATION TYPES
MATERIAL TYPES
Sinks can be installed in 3 ways depending on your kitchen worktop and your preference:
INSET SINKSInset sinks are installed from above into a pre-prepared hole in your worktop. It gives you the widest range of sink shapes, sizes and styles to choose from.
STAINLESS STEELFranke stainless steel sinks are made from premium quality chrome nickel steel, which looks stunningly beautiful, is highly resistant to staining, rust and corrosion - plus it won’t chip, craze, flake or break.
It’s the most popular material – and for good reason: Stainless steel has a timeless quality that sits beautifully in a traditional or contemporary style kitchen, offering stunning good looks and a durability that helps keep it looking at it's best for years.
UNDERMOUNT SINKSUndermount sinks are installed underneath the worksurface and therefore require a solid surface worktop such as granite or wood, they are not compatible with laminate worksurfaces.
FRAGRANITEFragranite is an exceptionally tough material which is highly resistant to burns, dents chips and stains. It was pioneered by Franke and contains 80% granite to form a unique material with a subtle sheen that is warm to the touch.
Kitchens can be a critical location for spreading bacteria and demand special attention to hygiene. On unprotected material, bacteria can multiply every 20 minutes making surfaces unhygienic. The integrated Sanitized® hygiene function in Fragranite sinks helps to keep this area clean and provides the sink with lasting protection.
FLUSHMOUNT SINKSFlushmount sinks feature a single thickness edge allow a slimfit to the benchtop which can also be recessed resulting in a flush fit with the surface
SINKS
Bacteria
Moisture Substrate with silver ions
The silver ion locates the bacteria via the moisture and deactivates it.
The silver ion locates the bacteria viathe moisture and deactivates it.
FRAGRANITECOLOUR OPTIONS
ONYX POLAR WHITE
11
ACCESSORY VALUE PACK : AVP-ANX
CB 104Chopping Board
SB 112Strainer Bowl
CR 113Champagne Flute Rack
ACCESSORIES
RM 42Rollamat
CB 104Chopping Board
SB 112Strainer Bowl
DB 448Drainer Basket
CR 113Champagne Flute Rack
5 6 75 6 7
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
European Image Pictured
12
ATON INSET/FLUSHMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
ANX 211 LHDANX 211 RHD 1004 x 514mm 480 x 400 x 190mm/36L Inset: 995 x 506mm, cr=20
Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ANX 220 864 x 514mm 340 x 400 x 190mm/25L (x2) Inset: 855 x 506mm, cr=20Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ANX 251 LHDANX 251 RHD 1004 x 514mm 340 x 400 x 190mm/25L
165 x 306 x 130mm/6LInset: 995 x 506mm, cr=20Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ANX 221 LHDANX 221 RHD 1164 x 514mm 340 x 400 x 190mm/25L (x2) Inset: 1155 x 506mm, cr=20
Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ANX 211
ANX 251
ANX 220
ANX 221
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 36mm
600
600
800
800
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
13
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
DB 425Drainer Basket
DT 206Extension Drainer
SB 177Strainer Bowl
CB 173Chopping Board
CB 523Chopping Board
RM 44Rollamat
5 6 75 6 7
14
AURORA INSET/UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
PFX 620B 860 x 500mm 380 x 420 x 180mm 845 x 485mm, cr=20 1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
PFX 620B 900
FEATURES & BENEFITS
TECHNICAL INFORMATION
Laser-EdgePro�le
SoundDeadening
Pads18 10 Stainless
Steel
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 115mm
15
1 21 2
1 2 31 2 3
2 3 42 3 4
ACCESSORIES
CB 600Chopping Board
DB 784Drainer Basket
RM 44Rollamat
European Image Pictured
16
BASIS INSET
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
BFG 651 ONYX REV 970 x 500mm 340 x 420 x 200mm/28L150 x 290 x 100mm/4L 954 x 484mm 1 2
1 2
1 2 31 2 3 2 3 4
2 3 4
BFG 621 ONYX REV 1160 x 500mm 337 x 420 x 200mm/28L (x2) 1144 x 484mm 1 21 2
1 2 31 2 3 2 3 4
2 3 4
BFG 651 ONYX REV 600 800BFG 621 ONYX REV
FEATURES & BENEFITS
TECHNICAL INFORMATION
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 15mm
REMOTE WASTE REMOTE WASTE
17
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
DT 360Extension Drainer
RM 44Rollamat
DB 664Drainer Basket
SB 452Strainer Bowl
CB 964Chopping Board
18
BOLERO INSET/FLUSHMOUNT/UNDERMOUNT
BOX 210-36 450 600
800
BOX 210-50
BOX 210-68
FEATURES & BENEFITS
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
BOX 210-36 400 x 450mm 360 x 410 x 200mm/28L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
BOX 210-50 540 x 450mm 500 x 410 x 200/41L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
BOX 220 780 x 450mm 360 x 410 x 200mm/28L (x2) Template 1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
BOX 210-68 725 x 450mm 685 x 410 x 200mm/56L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
TECHNICAL INFORMATION
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2
800BOX 220
Bowl Radius 12mm
SoundDeadening
Pads18 10 Stainless
SteelFranke Bowl
InsulationFlushmount
Fit
new
new
new
new
19
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ACCESSORIES
RM 43Rollamat
SB 452Strainer Bowl
TR 453Tray
CB 062Chopping Board
DT 587Extension Drainer
DB 664Drainer Basket
20
CENTINOX INSET/FLUSHMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
CEX 210-50/HW 555 x 465mm 500 x 410 x 200mm/37L Inset: 536 x 446mm, cr=30Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5 4 5 6
4 5 6
5 6 75 6 7
CEX 210-50/HW 600
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
HygienicIntegrated
Waste
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 12mm
NOTE : Food waste disposers cannot be installed with the Franke Centinox series which features a hygienic integrated waste
REMOTE WASTE
21
European Image Pictured
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
RM 44Rollamat
SB 452Strainer Bowl
TR 453Tray
CB 964Chopping Board
DT 360Extension Drainer
DB 664Drainer Basket
5 6 75 6 7
ACCESSORY VALUE PACK : AVP-CMX
DT 360Extension Drainer
CB 964Chopping Board
6 7 86 7 8
22
CENTINOX MINIMALIST INSET/FLUSHMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
CMX 210-34 370 x 440mm 340 x 410 x 175mm/24L Inset: 357 x 427mm, cr=0-20Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 210-50 530 x 440mm 500 x 410 x 200mm/41L Inset: 517 x 427mm, cr=0-20Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 220-50/34 887 x 432mm 500 x 410 x 200mm/41L340 x 410 x 175mm/24L
Inset: 876 x 421mm, cr=18Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 210-34
CMX 220-50/34
450
1000
600CMX 210-50
FEATURES & BENEFITS
TECHNICAL INFORMATION
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 12mm
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
new
new
new
23
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
RM 44Rollamat
SB 452Strainer Bowl
TR 453Tray
CB 964Chopping Board
DT 360Extension Drainer
DB 664Drainer Basket
ACCESSORY VALUE PACK : AVP-CMX
DT 360Extension Drainer
CB 964Chopping Board
6 7 86 7 8
5 6 75 6 7
European Image Pictured
24
CENTINOX MINIMALIST UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
CMX 110-34 370 x 440mm 340 x 410 x 175mm/24L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 110-50 530 x 440mm 500 x 410 x 175mm Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 120-34-34 735 x 440mm 340 x 410 x 175mm/24L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
CMX 110-34
CMX 120-34-34
450
1000
600CMX 110-50
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 12mm
new
new
new
25
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
CB 523Chopping Board
DB 425Drainer Basket
SB 736Strainer Bowl
SB 548Strainer Bowl
RM 44Rollamat
European Image Pictured
26
DRINA INSET
DRX 651 600 800DRX 621
FEATURES & BENEFITS
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
DRX 651 LHDDRX 651 RHD 1030 x 500mm 360 x 420 x 180mm/27L
170 x 320 x 130mm/7L 1014 x 484mm, cr=201 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5
4 5 64 5 6
DRX 621 LHDDRX 621 RHD 1200 x 500mm 360 x 420 x 180mm/27L
350 x 340 x 170mm/20L 1184 x 484mm, cr=201 21 2 1 2 31 2 3
4 5 64 5 6
TECHNICAL INFORMATION
Laser-EdgePro�le
SoundDeadening
Pads
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 60mm
18 10 StainlessSteel
27
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
CB 124Chopping Board
SB 491Strainer Bowl
CB 501Chopping Board
DB 448Drainer Basket
RM 41Rollamat
SB 015Strainer Bowl - Foldable
5 6 75 6 7
ACCESSORY VALUE PACK : AVP-EOX
CB 124Chopping Board
SB 491Strainer Bowl
6 7 86 7 8
European Image Pictured
28
EPOS INSET/FLUSHMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
EOX 220/HW 860 x 510mm 360 x 390 x 175mm/24L (x2) Inset: 849 x 499mm, cr=10Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
6 7 86 7 8
EOX 251/HW LHDEOX 251/HW RHD 1000 x 510mm 360 x 390 x 175mm/24L
160 x 390 x 120mm/7LInset: 989 x 499mm, cr=10Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
6 7 86 7 8
EOX 221/HW LHDEOX 221/HW RHD 1160 x 510mm 360 x 390 x 175mm/24L
320 x 390 x 175mm/21LInset: 1149 x 499mm, cr=10Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
EOX 220/HW
EOX 221/HW
800 EOX 251/HW
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
HygienicIntegrated
Waste
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 50mm
600
800
NOTE : Food waste disposers cannot be installed with the Franke Epos series which feature a hygienic integrated waste.
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
29
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
RM 37Rollamat
CB 503Chopping Board
ST 506Strainer Tray
DB 426Drainer Basket
CB 124Chopping Board
European Image Pictured
30
KARST INSET/FLUSHMOUNT/UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
KTX 220 855 x 480mm 450 x 400 x 200mm/32L300 x 330 x 155mm/14L
Inset : 835 x 460mm, cr=10Flush/Undermount : Template
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
FEATURES & BENEFITS
TECHNICAL INFORMATION
FlushmountFit
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
Steel
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2
KTX 220 900
31
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
SB 122Strainer Bowl
ST 123Strainer Tray
DR 121Drainer Rack
CB 124Chopping Board
RM 42Rollamat
DB 448Drainer Basket
DT 651Extension Drainer
5 6 75 6 7
6 7 86 7 8
European Image Pictured
32
KUBUS UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
KBX 110-20/HW 230 x 430mm 200 x 400 x 150mm/10L Template1 2 31 2 3
4 5 64 5 6
KBX 110-34/HW 370 x 430mm 340 x 400 x 175mm/23L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5 4 5 6
4 5 6
5 6 75 6 7 6 7 8
6 7 8KBX 110-45/HW 480 x 430mm 450 x 400 x 180mm/32L Template
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5 4 5 6
4 5 6
5 6 75 6 7 6 7 8
6 7 8KBX 110-55/HW 580 x 430mm 550 x 400 x 190mm/40L Template
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5 4 5 6
4 5 6
5 6 75 6 7 6 7 8
6 7 8KBX 110-70/OF 730 x 430mm 700 x 400 x 230mm/63L Template
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5 4 5 6
4 5 6
5 6 75 6 7 6 7 8
6 7 8KBX 120-34/OF 770 x 455mm 340 x 400 x 200mm/23L (x2) Template
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5 4 5 6
4 5 6
5 6 75 6 7 6 7 8
6 7 8
KBX 110-20/HW
KBX 110-45/HW
300
600
500KBX 110-34/HW
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
HygienicIntegrated
Waste
SoundDeadening
Pads18 10 Stainless
Steel
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2
KBX 110-55/HW 600
800KBX 110-70/OF KBX 120-34/OF 800
Bowl Radius 25mm
NOTE : Food waste disposer units cannot be installed with the Franke Kubus /HW series which features a Franke hygienic integrated waste. If required, a special order can be placed as /OF on the end of model number that will allow for waste disposer installation.
NOTE : Template supplied is for installation with reveal leaving a step to the sink for some accessories to recess into the benchtop
33
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
7 8 97 8 9
8 9 108 9 10
9 10 119 10 11
ACCESSORIES
SB 122Strainer Bowl
ST 123Strainer Tray
DR 121Drainer Rack
CB 124Chopping Board
RM 41Rollamat
RM 42Rollamat
DB 448Drainer Basket
DT 651Extension Drainer
DT 360Extension Drainer
CB 176Chopping Board
European Image Pictured
34
KUBUS FRAGRANITE UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
KBG 110-34 380 x 460mm 340 x 400 x 200mm/27L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8 7 8 9
7 8 9KBG 110-50 540 x 440mm 500 x 400 x 200mm/40L Template
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8 7 8 9
7 8 9KBG 110-74 802 x 460mm 742 x 410 x 200mm/60L 742 x 410mm, cr=8
4 5 64 5 6
6 7 86 7 8 8 9 10
8 9 10
9 10 119 10 11
KBG 110-34 ONYX KBG 110-34 PW
KBG 110-74 ONYX KBG 110-74 PW
500 500
900 900
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 25mm
600 600KBG 110-50 ONYX KBG 110-50 PW
NOTE : Sink has stepped down ledge all around the bowl for correct fitting of some accessories
NOTE : Sink has stepped down ledge all around the bowl for correct fitting of some accessories
35
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
6 7 86 7 8
7 8 97 8 9
8 9 108 9 10
9 10 119 10 11
ACCESSORIES
SB 122Strainer Bowl
ST 123Strainer Tray
DR 121Drainer Rack
CB 124Chopping Board
RM 41Rollamat
RM 42Rollamat
DB 448Drainer Basket
DT 651Extension Drainer
DT 360Extension Drainer
CB 176Chopping Board
36
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
KBG 160 558 x 460mm 340 x 400 x 200mm/27L160 x 400 x 150mm/9L Template
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
6 7 86 7 8 7 8 9
7 8 9
KBG 120 802 x 460mm 345 x 390 x 205mm/27L (x2) 742 x 410mm, cr=8mm4 5 64 5 6
6 7 86 7 8 8 9 10
8 9 10
9 10 119 10 11
FEATURES & BENEFITS
TECHNICAL INFORMATION
600
800
600
800
KBG 160 ONYX
KBG 120 ONYX
KBG 160 PW
KBG 120 PW
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 25mm
NOTE : Sink has stepped down ledge all around the bowl for correct fitting of some accessories. Please note no overflow KBG 120 ONYX.
NOTE : Sink has stepped down ledge all around the bowl for correct fitting of some accessories. Please note no overflow KBG 120 Polar White.
FrankeHiddenOver�ow
KUBUS FRAGRANITE UNDERMOUNT
new new
37
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
SB 491Strainer Bowl
CB 501Chopping Board
DB 448Drainer Basket
DT 587Extension Drainer
DT 653Extension Drainer
DT 651Extension Drainer
RM 42Rollamat
RM 44Rollamat
5 6 75 6 7
6 7 86 7 8
7 8 97 8 9
38
LARGO UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
LAX 110-36/39 384 x 414mm 360 x 390 x 175mm/24L Template1 21 2 1 2 31 2 3
2 3 42 3 4 4 5 6
4 5 6
6 7 86 7 8
LAX 110-36/45 385 x 470mm 360 x 445 x 175mm/28L Template 3 4 53 4 5
7 8 97 8 9
LAX 110-39/45 415 x 470mm 390 x 445 x 175mm/30L Template1 21 2 1 2 31 2 3 3 4 5
3 4 5
7 8 97 8 9
LAX 110-50/41 530 x 440mm 500 x 410 x 175mm/35L Template 5 6 75 6 7
7 8 97 8 9
LAX 120-36 795 x 440mm 360 x 390 x 175mm/24L (x2) Template1 21 2 1 2 31 2 3
2 3 42 3 4 5 6 7
5 6 7
6 7 86 7 8
LAX 110-36/39
LAX 110-39/45
LAX 120-36
450
500
900
450
600
LAX 110-36/45
LAX 110-50/41
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
Steel
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 50mm
39
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
RM 40Rollamat
ST 787Strainer Tray
CB 900Chopping Board
DB 650Drainer Basket
DT 651Extension Drainer
European Image Pictured
40
MYTHOS FUSION INSET
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
MTF 611 LHDMTF 611 RHD 1000 x 515mm 500 x 390 x 200mm/38L 984 x 494mm, cr=10
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
MTG 620 910 x 515mm 460 x 390 x 200mm/34L340 x 390 x 200mm/25L 894 x 494mm, cr=10
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
MTF 651 LHDMTF 651 RHD 1000 x 515mm 360 x 390 x 200mm/27L
160 x 390 x 140mm/8L 984 x 494mm, cr=101 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
MTF 611 ONYX MTF 611 PW
MTG 620 ONYX MTG 620 PW
600 600
900 900
600 600MTF 651 ONYX MTF 651 PW
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 25mm
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
41
ACCESSORY VALUE PACK : AVP-NEX
CB 601Chopping Board
DB 664Drainer Basket
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
CB 601Chopping Board
SB 603Strainer Bowl
ST 602Strainer Tray
DB 664Drainer Basket
RM 44Rollamat
5 6 75 6 7
European Image Pictured
42
NEPTUNE INSET
NEX 611
NEX 621
600
800
600NEX 651
FEATURES & BENEFITS
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
NEX 611 LHDNEX 611 RHD 864 x 514mm 360 x 420 x 200mm/27L 844 x 494mm, cr=20
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
NEX 651 LHDNEX 651 RHD 1004 x 514mm 360 x 420 x 200mm/27L
167 x 306 x 152mm/7L 954 x 494mm, cr=201 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
NEX 621 LHDNEX 621 RHD 1164 x 514mm 360 x 420 x 200mm/27L (x2) 1144 x 494mm, cr=20
1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
TECHNICAL INFORMATION
18 10 StainlessSteel
IntegratedSealing
Strip
SoundDeadening
Pads
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 50mm
43
1 21 2
1 2 31 2 3
2 3 42 3 4
ACCESSORIES
CB 523Chopping Board
DB 425Drainer Basket
SB 736Strainer Bowl
44
PACIFIC PLUS INSET
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
PFX P 611 LHDPFX P 611 RHD 860 x 510mm 360 x 420 x 180mm/27L 845 x 485mm, cr=20
1 21 2 1 2 31 2 3
PFX P 651 LHDPFX P 651 RHD 1060 x 500mm 360 x 420 x 180mm/27L
170 x 320 x 130mm/7L 1045 x 485mm,cr=201 21 2 1 2 31 2 3
2 3 42 3 4
PFX P 621 LHDPFX P 621 RHD 1200 x 500mm 360 x 420 x 180mm/27L
350 x 340 x 170mm/20L 1185 x 485mm, cr=201 21 2 1 2 31 2 3
PFX P 611
PFX P 621
PFX P 651
FEATURES & BENEFITS
TECHNICAL INFORMATION
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 60mm
500
800
800
Laser-EdgePro�le
SoundDeadening
Pads18 10 Stainless
Steel
45
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
DT 360Extension Drainer
SB 060Strainer Bowl
CB 600Chopping Board
RM 44Rollamat
DB 664Drainer Basket
European Image Pictured
46
PEAK UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
PKX 110-34 370 x 450mm 340 x 420 x 180mm/24L Template 1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
PKX 110-50 530 x 450mm 500 x 420 x 180mm/37L Template 1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
PKX 110-70 735 x 450mm 700 x 420 x 180mm/52L Template 1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
PKX 110-34
PKX 110-70
400 PKX 110-50
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
SoundDeadening
Pads18 10 Stainless
SteelFranke Bowl
Insulation
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 5mm
550
800
REMOTE WASTE
REMOTE WASTE
REMOTE WASTE
47
1 21 2
ACCESSORIES
RM 44Rollamat
European Image Pictured
48
RAMBLA INSET/UNDERMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
LUX 610 ∅ 440mm ∅ 380 x 180mm Inset :∅ 425mmUndermount : ∅ 380mm
1 21 2
LUX 610 450
FEATURES & BENEFITS
TECHNICAL INFORMATION
SoundDeadening
Pads18 10 Stainless
Steel
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2
49
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
CB 966Chopping Board
SB 491Strainer Bowl
DB 448Drainer Basket
RM 41Rollamat
SB 015Strainer Bowl - Foldable
ACCESSORY VALUE PACK : AVP-SNX
CB 966Chopping Board
SB 491Strainer Bowl
5 6 75 6 7
50
SINOS INSET/FLUSHMOUNT
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
SNX 211/HW LHDSNX 211/HW RHD 780 x 510mm 360 x 390 x 175mm/24L Inset: 767 x 497mm, cr=64
Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5
5 6 75 6 7
SNX 220/HW 780 x 510mm 360 x 390 x 175mm/24L320 x 390 x 175mm/21L
Inset: 767 x 497mm, cr=64Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SNX 251/HW LHDSNX 251/HW RHD 965 x 510mm 360 x 390 x 175mm/24L
160 x 390 x 120mm/7LInset: 952 x 497mm, cr=64Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5
5 6 75 6 7
SNX 221/HW LHDSNX 221/HW RHD 1120 x 510mm 360 x 390 x 175mm/24L
320 x 390 x 175mm/21LInset: 1107 x 497mm, cr=64Flushmount: utilise DXF file
1 21 2 1 2 31 2 3
2 3 42 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SNX 211/HW
SNX 251/HW
400
600
800
800
SNX 220/HW
SNX 221/HW
FEATURES & BENEFITS
TECHNICAL INFORMATION
FrankeHiddenOver�ow
HygienicIntegrated
Waste
SoundDeadening
Pads18 10 Stainless
SteelFlushmount
Fit
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2
NOTE : Food waste disposers cannot be installed with the Franke Sinos series which features a hygienic integrated waste.
Bowl Radius 50mm
REMOTE WASTE
REMOTE WASTE REMOTE WASTE
REMOTE WASTE
51
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
ACCESSORIES
CB 176Chopping Board
DT 651Extension Drainer
DB 448Drainer Basket
SB 209Strainer Bowl
DT 605Drainer Tray
RM 44Rollamat
5 6 75 6 7
52
STEEL QUEEN INSET
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
SQX 610-36-2 410 x 460mm 356 x 406 x 200mm/27L Template1 21 2 1 2 31 2 3
2 3 42 3 4
4 5 64 5 6
5 6 75 6 7
SQX 620 D/T 794 x 521mm 356 x 406 x 200mm/27L (x2) Template 1 21 2
1 2 31 2 3
2 3 42 3 4
4 5 64 5 6
5 6 75 6 7
SQX 620 B-R/T 794 x 521mm 457 x 406 x 200mm/36L254 x 406 x 180mm/17L Template 1 2
1 2 1 2 3
1 2 3 2 3 4
2 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SQX 620 C-R/T 692 x 522mm 356 x 406 x 200mm/27L254 x 406 x 180mm/17L Template 1 2
1 2 1 2 3
1 2 3 2 3 4
2 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SQX 610-36-2
SQX 620 B-R/T
450
800
800
800
SQX 620 D/T
SQX 620 C-R/T
FEATURES & BENEFITS
TECHNICAL INFORMATION
18 10 StainlessSteel
Franke Bowl Insulation
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 50mm
53
1 21 2
1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
ACCESSORIES
CB 176Chopping Board
DT 651Extension Drainer
DB 448Drainer Basket
SB 209Strainer Bowl
DT 605Drainer Tray
RM 44Rollamat
European Image Pictured
54
MODEL OVERALL SIZE BOWL SIZE CUT-OUT SIZE ACCESSORIES
SQX 110-36-2 400 x 451mm 356 x 406 x 200mm/27L Template1 21 2 1 2 31 2 3
2 3 42 3 4
3 4 53 4 5
4 5 64 5 6
5 6 75 6 7
SQX 120 D-2 784 x 451mm 356 x 406 x 200mm/27L (x2) Template 1 21 2
1 2 31 2 3
2 3 42 3 4
4 5 64 5 6
5 6 75 6 7
SQX 120 C-L-2 683 x 451mm 254 x 406 x 180mm/17L356 x 406 x 200mm/27L Template 1 2
1 2 1 2 3
1 2 3 2 3 4
2 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SQX 120 C-R-2 683 x 451mm 356 x 406 x 200mm/27L254 x 406 x 180mm/17L Template 1 2
1 2 1 2 3
1 2 3 2 3 4
2 3 4 3 4 5
3 4 5
4 5 64 5 6
5 6 75 6 7
SQX 110-36-2
SQX 120 C-L-2
450
800
900SQX 120 D-2
FEATURES & BENEFITS
TECHNICAL INFORMATION
Franke Bowl Insulation18 10 Stainless
Steel
800SQX 120 C-R-2
ACCESSORIES AVAILABLE ACCESSORIES INCLUDED1 21 2 1 2
1 2Bowl Radius 50mm
STEEL QUEEN UNDERMOUNT
55
European Image Pictured
56
LAUNDRY TUBS
MODEL RANGE OVERALL SIZE BOWL SIZE CUT-OUT SIZE FINISHAEX 610 Acquario Line 860 x 510mm 740 x 375 x 220mm/96L 490 x 840mm, cr=10 Stainless SteelDLT 610 Deluxe 600 x 500mm 525 x 425 x 260mm/45L 588 x 488mm, cr=50 Stainless SteelKBG 110-50 Kubus Fragranite 540 x 440mm 500 x 400 x 200mm/40L Template FragraniteKBG 110-74 Kubus Fragranite 802 x 460mm 742 x 410 x 200mm/60L 742 x 410mm, cr=8 FragraniteSQX 610 Steel Queen 510 x 460mm 460 x 410 x 250mm/41L Template Stainless SteelSQX 610-60 Steel Queen 650 x 500mm 600 x 440 x 300mm/70L Template Stainless Steel
600
BYPASS PLUMBING KIT
DLT 610 DELUXE
TECHNICAL INFORMATION
600 700SQX 610 STEEL QUEEN SQX 610-60 STEEL QUEEN
600 600
900 900
KBG 110-50 ONYX KBG 110-50 PW
KBG 110-74 ONYX KBG 110-74 PW
800AEX 610 ACQUARIO LINE
new
57
THE PERFECT MATCHThe Franke soap dispenser provides a fast and easy to operate hand pump for all liquid soaps. It fits neatly and unobtrusively alongside sinks in the worktop, can be filled from above and it's design is carefully chosen to complement the Franke tap range.
58
SOAP DISPENSERS
SD 55 CLASSIC
SDS 371 POCO
SD 23 LOWLINE
SD 519 SINOS
MODEL RANGE CUT-OUT OVERALL SIZE INCLUDES MATERIALSD 55 Classic ∅ 25mm 80 x 75mm Soap Container (500ml) ChromeSD 23 Lowline ∅ 32mm 55 x 100mm Soap Container (500ml) ChromeSDS 371 Poco ∅ 25mm 61 x 101mm Soap Container (330ml) Stainless SteelSD 519 Sinos ∅ 25mm 80 x 121mm Soap Container (250ml) ChromeSD 319 Standard ∅ 25mm 45 x 100mm Soap Container (500ml) ChromeSDS 246 Tower ∅ 25mm 122 x 80mm Soap Container (330ml) Stainless Steel
TECHNICAL INFORMATION
SD 319 STANDARD SDS 246 TOWER
59
PLEASE NOTE
Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath. For all other swivel taps, we recommend the use of the Franke Tap Support Arm (see page 68) to provide additional support. Please ensure all Franke tapware is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply lines before installing tapware. Failure to do so may void warranty.
A CONSTANT FLOW OF CLEVER IDEASFranke taps are designed to complement our entire sink range. They are superb in design and are manufactured with exceptional quality.
This stunning range includes swivel mixers and pull-out taps in various sizes and designs to complement your kitchen appearance.
60
TAPS
TA 6811 ANGOLO (PULL-OUT) TA 7811 AZIMUT (PULL-OUT SPRAY)
TA 7000 ARTIS (SWIVEL) TA 7001 ARTIS (PULL-OUT SPRAY)
TA 6211 CAPRICE (PULL-OUT) TA 5120 CENTINOX (FLEX)
MODEL RANGE STYLE CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALTA 7011 Active Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 7010 Active Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6811 Angolo Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm ChromeTA 7811 Azimut Pull Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 7000 Artis Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 7001 Artis Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6211 Caprice Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 5120 Centinox Flex ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless Steel
TECHNICAL INFORMATION
TA 7011 ACTIVE (PULL-OUT) TA 7010 ACTIVE (SWIVEL)
61
PLEASE NOTE
Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath. For all other swivel taps, we recommend the use of the Franke Tap Support Arm (see page 68) to provide additional support. Please ensure all Franke tapware is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply lines before installing tapware. Failure to do so may void warranty.
62
TAPS
TA 6800 KUBUS (SWIVEL) TA 6801 KUBUS (PULL -OUT)
TA 6201 MAXXIS (PULL-OUT SPRAY)
TA 621B MYTHOS BLACK (PULL-OUT)
TA 631 MYTHOS (PULL-OUT)
TA 621W MYTHOS WHITE (PULL-OUT)
TA 9500 EOS (SWIVEL) TA 9501 EOS (PULL-OUT)
MODEL RANGE STYLE CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALTA 9500 Eos Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless SteelTA 9501 Eos Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless SteelTA 6800 Kubus Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm ChromeTA 6801 Kubus Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6201 Maxxis Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 5 star / 6 Lpm ChromeTA 631 Mythos Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm SatinTA 621B Mythos Black Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm BlackTA 621W Mythos White Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm White
TECHNICAL INFORMATION
new
new
new
new
63
PLEASE NOTE
Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath. For all other swivel taps, we recommend the use of the Franke Tap Support Arm (see page 68) to provide additional support. Please ensure all Franke tapware is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply lines before installing tapware. Failure to do so may void warranty.
64
TAPS
TA 7181 PROFESSIONAL (FLEX SPRAY) TA 9101 PROFESSIONAL REACH (PULL-OUT SPRAY)
TA 6300 SINOS (SWIVEL)
TA 6300B SINOS BLACK (SWIVEL)
TA 6301 SINOS (PULL-OUT)
TA 6301B SINOS BLACK (PULL-OUT)
TA 780S NIAGRA (SWIVEL) TA 6200 PLANARIO TOWER (SWIVEL)
TECHNICAL INFORMATION
MODEL RANGE STYLE CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALTA 780S Niagra Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6200 Planario Tower Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm ChromeTA 7181 Professional Flex ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 9101 Professional Reach Pull out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless SteelTA 6300 Sinos Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6301 Sinos Pull out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm ChromeTA 6300B Sinos Black Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm BlackTA 6301B Sinos Black Pull out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Black
new new
65
PLEASE NOTE
Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath. For all other swivel taps, we recommend the use of the Franke Tap Support Arm (see page 68) to provide additional support. Please ensure all Franke tapware is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply lines before installing tapware. Failure to do so may void warranty.
66
TAPS
TA 9510 TAROS (SWIVEL) TA 9511 TAROS (PULL-OUT)
TA 6300W SINOS WHITE (SWIVEL) TA 6301W SINOS WHITE (PULL-OUT)
TA 7301 VERONA (FLEX SPRAY)
TA 7300 VERONA (SWIVEL) TA 7311 VERONA (PULL-OUT SPRAY)
TECHNICAL INFORMATION
MODEL RANGE STYLE CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALTA 6300W Sinos White Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm WhiteTA 6301W Sinos White Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm WhiteTA 9510 Taros Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless SteelTA 9511 Taros Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 4 star / 7.5 Lpm Stainless SteelTA 7300 Verona Swivel ∅ 35mm 7.25 72.5 50 kPa 500 kPa 5 star / 6 Lpm ChromeTA 7311 Verona Pull-Out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 5 star / 6 Lpm ChromeTA 7301 Verona Flex ∅ 35mm 7.25 72.5 50 kPa 500 kPa 5 star / 6 Lpm Chrome
new
new
new
new
67
TA 6831 (PULL OUT)
• No electrical connection required.
• Light is powered by built-in water turbine.
• Light colour is BLUE for cold and gradually changes to RED for hot water.
TA 6841 (PULL OUT)
WITH LIGHTWITHOUT LIGHT
TECHNICAL INFORMATION
MODEL RANGE STYLE CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALTA 6831 Pyra Pull out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm ChromeTA 6841 Pyra Light Pull out ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm Chrome
PYRA SEE THE TEMPERATURETap into a design you love. Design and innovation is the core of the Franke tap collection. The amazing Pyra Light TA 6841 shows you the temperature of the water from hot to cold as it flows from a single tap head.
There is no electrical wires as the light is powered by the water flow, a truly ingenious design.
68
PRTRS0005 PROTRONIC
MODEL CUT-OUT MIN. (PSI) MAX. (PSI) MIN. (kPa) MAX. (kPa) WELS MATERIALPRTRS0005 ∅ 35mm 7.25 72.5 50 kPa 500 kPa 6 star / 4.5 Lpm Chrome
TECHNICAL INFORMATION
• Hands free, sensor operation.• Serviceability from top of the bench.• Greater wash zone.• Temperature adjustability.• Warranty - 2 years electronics / 5 years product.
PROTRONIC SENSOR TAPThe innovative Franke Protronic sensor tap reduces the consumption of water and energy by up to 50%. Thanks to the fully automatic mode of operation, water flows only when it is actually needed.
The non-touch technique ensures absolutely hygienic hand washing with no need to touch the tap. Users simply place their hands in the vicinity of the clearly visible sensor field.
new
69
BRING YOUR SINKBACK TO LIFEFranke Twisters are designed to clean and enhance the appearance of your sink by removing minor scratches and stubbornwater marks.
Use the Franke Twister special sponge and clean the sink surface, then rinse thoroughly and polish with a moist rag or the softer Franke Inox Creme.
70
PK 945 SPAZIO PLUMBING KIT
TS 896 TAP SUPPORT ARM
PLUMBING KITS
TAP SUPPORT
PK 205 ECO PLUMBING KIT
TS 655 TAP SUPPORT BRACE
INOX CREME
CLEANING / CARE
INOX TWISTER
MODEL SIZE DESCRIPTION
TS 896 100 x 70mm Plastic.
TS 655 N/A Metal.
PK 945 N/A The solution to installing two and three bowls sinks into one flush-fitted outlet located at the rear of your cabinet, maximising space. Includes connection for dishwasher outlet.
PK 205 N/A Space-saving and levelling kit designed for installing two bowls into one flush-fitted outlet located at the rear of your cabinet, maximising space.
INOX CREME PVC 250g tube Highly effective stainless steel cleaner.
INOX TWISTER 300g tub Highly effective stainless steel cleaner in a ready to use applicator.
TECHNICAL INFORMATION
71
SORTING WASTE FORRECYCLING HAS NEVERBEEN EASIER.Franke has developed a series of clever waste separation products which help you to take care of our environment.
Separation of the different sorts of wastes has been thought out in detail. The sorter systems glide back into the kitchen cabinet, keeping your kitchen environment clean & fresh.
72
SORTER 300-45 DUO SORTER
WB 1000 WASTE BIN
NOTE: Installation is made easier with the Franke Spazio Plumbing Kit. Trio bins (9L) can be purchased separately.
BIN IN BENCH
SORTER SYSTEMS
SORTER 300-60 DUO SORTER
MODEL SIZE DESCRIPTION
SORTER 300-45 DUO 412 x 454 x 383mm Waste sorter system - 21L bins (x2)
SORTER 300-60 SORTER 562 x 454 x 383mm Waste sorter systems 21l bins (x2)
WB 1000 ∅ 306 x 335mm Cut-out size : ∅ 280mmDrops in counter at 306mm diameter
TECHNICAL INFORMATION
Installation is made easier with the Franke Spazio Plumbing Kit (see page 68) Trio bins can be purchased separately.
73
SUPPORT
SPARE PARTS & SERVICING
Email: [email protected]
SALES & PRODUCT ENQUIRIES
Email : [email protected]
MARKETING
Email : [email protected]
CONTACT DETAILS
Phone : (03) 9700 9100Fax : (03) 9700 9191
HELPFUL INFORMATION
WARRANTY
European Image Pictured
YEAR WARRANTY50
STAINLESS STEEL SINKS*Terms & Conditions Apply
YEAR WARRANTY25
FRAGRANITE SINKS*Terms & Conditions Apply
YEAR WARRANTY15
KITCHEN MIXERS*Terms & Conditions Apply
monthsWARRANTY12
WASTE MANAGEMENTPLUMBING KITSSINK ACCESSORIES*Terms & Conditions Apply
74
ITEM FILE WHERE TO FIND
> 2015/16 FRANKE CATALOGUE PDF www.franke.com.au > support
> 2015/16 FRANKE PRICELIST PDF www.franke.com.au > support
> CUT-OUT TEMPLATES DWG / DXF www.franke.com.au > home page > quick links
> TECHNICAL DIAGRAMS JPEG www.franke.com.au > products > download
> PRODUCT PICTURE JPEG www.franke.com.au > products > download
> SPECIFICATION SHEETS PDF www.franke.com.au > products
> REDEMPTION FORMS PDF www.franke.com.au > support
> RESELLER LOCATOR Link www.franke.com.au > support
WEB RESOURCES
As our policy is one of continual improvement, the manufacturers reserve the right to vary specifications or delete models from their range without prior notification. Always use the physical product measurements for cut-outs as the manufacturer’s template is a guide only and may differ from the actual product dimensions over time. The manufacturers take no responsibility for printing errors.