Subsea

Ver. Status Issue date Made by Checked by Approved by

00 IFC 2013.04.23 KNUDTZEN, FRITHJOF

THOMSON, BARRIE INNES, ANDREW

Originator: KNUDTZEN, FRITHJOF

This document contains Aker Subsea legal entity proprietary and confidential information that is legally privileged and is intended only for the person or entity to which it is addressed and any unauthorised use is strictly prohibited. It is provided for limited purpose and shall not be reproduced, stored electronically, transferred to other documents, disseminated or disclosed to any third parties without the prior written consent of the relevant Aker Subsea legal entity. Any attachments are subject to the specific restrictions and confidentiality regulations stated therein and shall be treated accordingly. The document is to be returned upon request and in all events upon completion of use for which it was provided.

Product Data Sheet, Production XMT

Brynhild SPS

10001727951-PDC-000

Client Document Number Client Document Version

Project code

Originator Discipline Doc.Type Sequential

number 01

21480-AKSSU-R-DS-0019

Reason for Issue Revision Rev. Date Prep. By Checked Approved

IFC 01 23.04.2013 Knudtzen, Frithjof Thomson, Barrie Innes, Andrew

www.akersolutions.com/subsea

Production XMT

The Production XMT lands out in the wellbay on the 4slot manifold template. Here it connects onto the18-3/4" wellhead and to the manifold using a 12"Horizontal Connection Module (HCM). The hydrauliccontrol pressure is supplied through the 12" HCM andthe electrical supply through 2 off electrical flying leadswhich connects on to the Subsea Control Module (SCM)directly.

The Production XMT provides the required means of controlon the well. The Production Master Valve (PMV) andProduction Wing Valve (PWV) provide barriers for theproduction fluid. The Production Choke Valve (PCV) providesthe means for adjusting flow from the well. The SCMprovides hydraulic control and monitoring abilities forpressure and temperature in the XMT and the well. The mainbore of the XMT allows for the landing of a Tubing Hanger(TH) which can provide hydraulic and electric communicationdown hole as well as chemical injection.

© Copyright 2012 Aker Solutions. All rights reserved.

Main ROV Panel

ROV Retrievable Chemical Injection Throttle Valves

Downhole Interface Unit

18-3/4” H4 Re-entry hub

Mechanical Override Rods

Subsea Control Module

Insert Retrievable Choke

Overall dimensions, H / W / D: 3698mm / 4000mm / 5343,5mm

Weight: ~42 tons

Nominal production bore: 5-1/8"

Nominal annulus bore: 2-1/16"

Design pressure: 690 bar at 345 bar hydraulic supply552 bar at 207 bar hydraulic supply

External interfaces: 12" HCM18-3/4" H4 connector18-3/4" Re-entry hub

Design depth: 82m

Design life: 15 years

Design temperature: 4 - 135°C

API product specification level: PSL 3G

SAP material number: 10143208

Work Package XMT

For further information please contact:

www.akersolutions.com/subsea

Field proven design

This Production XMT has been based on the originalHigh-Pressure/High-Temperature (HPHT) XMT whichwas first designed for use on the Statoil Kristin field.This has later been used on the Statoil Morvin andTotal Hild fields.

This XMT will be installed on the Lundin Brynhild field.

Aker Solutions ASSnarøyveien 36, NO-1364 FornebuPO Box 94, NO-1325 Lysaker

Production Wing Valve

Production Master Valve

Production Wing Block

Tubing Hanger Orientation Helix

18-3/4” H4 Connector

Annulus Circulation Valve

Annulus Master Valve

Annulus Wing Block

Spool