product data series 6vlfl2x-nf flush mount · series 6vlfl2x-nf flush mount ... 6vlfl2x500035knf...
TRANSCRIPT
All Pathway® products meet or exceed requirements as established by the National Electrical Code. Specifications subject to change without notice. Alzak® is a registered trademark of Alcoa.
Fixture: Type:
Project:
Manufactured and tested to UL#1598/8750 and CSA standards. Note: Suitable for damp location. Fixtures are not designed for direct contact with insulation.
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
APPLICATIONSmall-aperture medium-distribution downlight is suitable for commercial, retail and institutional applications that require an energy saving, long life LED lamp source, and a flush mount micro trim flange.
PRODUCT DATAREFLECTOR: The parabolic reflector redirects spill light from the engine, and eliminates high angle glare. Narrow (3/16") trim flange is flush with ceiling line for a clean appearance and smooth transition between the ceiling and fixture aperture. Specular Clear Alzak is standard; other finishes available for design flexibility.HOUSING: Heavy-gauge galvanized steel housing provides a secure mounting platform for the electrical components and protects the optical assembly. Integral plaster ring allows drywall compound to be applied up to edge of aperture. Trim flange rests in a flush mount position with drywall compound. Housing can be mechanically fastened to drywall to prevent movement and eliminate cracking or chipping. LED module is accessible from below. MOUNTING: Universal Mounting brackets adjust vertically and accept L-BAR interlocking, expandable c-channel hanger bars which are supplied standard. L-BARS are suitable for T-bar, wood joist, and metal joist ceiling styles. Additional features on last page.ELECTRICAL: Standard 120 or 277 VAC, 50-60 Hz. Optional 347V (E3).JUNCTION BOX: Heavy-gauge galvanized junction box pre-wired with grounding pigtail. Easy access covers. Multiple conduit knockouts listed for through branch circuit wiring.LED MODULE & DRIVER: LED Module and Driver are manufactured by Philips Lighting. DIMMING: Standard product is compatible with 0-10 volt dimming controls. See below for additional options.HEAT MANAGEMENT: Engineered heat sink provides passive cooling for optimum heat management of the LED engine. Philips Xitanium driver (D8), when used with Flex LED module, features an intelligent thermal feedback loop that monitors the temperature of the LED module. Power will be reduced if the temperature exceeds the optimum operating level. LED will dim in response but will not extinguish. This feature extends the life of both the LED module and driver.
Catalog #:
6VLFL2X
14.62"
15.08"
6.14"
5.98"6.66"
6VLED
SERIES 6VLFL2X-NF Flush Mount Recessed LED Downlight – 1023-4692 Lumen Flex
LDFX35.0UCUUUL
Rough Opening 6.75"
Fixture Series Lumens Color Temp. Input
Voltage Dimming Options
6VLFL2X
1100 (1023L-1033L, 12W) 1500 (1373L-1392L, 15W)2000 (1827L-1869L, 21W)3000 (2699L-2854L, 33W)4000 (3590L-3799L, 41W)5000 (3759L-4692L, 50W)
See next page for delivered lumens data.
4K (4000K)35K (3500K)3K (3000K)27K (2700K)
120/277V When Using
D8 Dimming*
E1 120 Volt*E2 277 Volt*E3 347 Volt^
D8 Xitanium 1% 0-10V (linear)
standard
More OptionsOn Next Page
NF = Flush Mount Trim
See Below for Additional
Options
Trim Trim Finish w/polished flange
6VLEDSP – Spot 42° Downlight Reflector6VLEDMD – Medium 58° Downlight Reflector
SCL – Soft Specular Clear AlzakHAZ – Haze AlzakNF – Flush Mount Trim
Example: 6VLEDMDSCLPFNFExample: 6VLFL2X11004KNE1D8
5 Year Warranty
(on LED module & driver)
Anchor ring allows drywall to be secured to product minimizing movement, reducing cracks.Anchor ring adjusts for ceiling thickness of 1/2", 5/8", 3/4", 1"
• Expected lamp life to be 50,000 hours with 70% lumen maintenance when ambient temperatures do not exceed 45°C. Lower ambient temperatures yield longer lamp life.CRI = 80. Data based on Flex LED module by Philips Lighting.
OptionsqEM^ = Emergency Battery Pack w/remotely located Test SwitchqIEM^ = EM Battery Pack w/ Integral Test Switch. (Not Available for Wet Location or Lensed Fixtures)
^ E3 , Pathwave and DMX options not compatible with Emergency Battery Option.
*Input voltage (E1, E2) not required to be specified with standard dimming (D8).
Damp Location
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected] LDFX35.0
CDMBUL
FIXTURE TRIM WATTAGE DELIVEREDLUMENS
BEAMDISTRIBUTION LPW
6VLFL2X110035KNF 6VLEDSPSCLNF 12 1033 42° 86.1
6VLFL2X150035KNF 6VLEDSPSCLNF 15 1373 42° 91.5
6VLFL2X200035KNF 6VLEDSPSCLNF 21 1869 42° 89.0
6VLFL2X300035KNF 6VLEDSPSCLPF 33 2699 42° 81.8
6VLFL2X400035KNF 6VLEDSPSCLNF 41 3590 42° 87.6
6VLFL2X500035KNF 6VLEDSPSCLNF 50 4434 42° 88.7
6VLFL2X110035KNF 6VLEDMDSCLNF 12 1023 55° 85.3
6VLFL2X150035KNF 6VLEDMDSCLNF 15 1392 55° 92.8
6VLFL2X200035KNF 6VLEDMDSCLNF 21 1827 55° 87.0
6VLFL2X300035KNF 6VLEDMDSCLNF 33 2854 55° 86.5
6VLFL2X400035KNF 6VLEDMDSCLNF 41 3799 55° 92.7
6VLFL2X500035KNF 6VLEDSPSCLNF 50 4692 55° 93.8
Delivered Lumen Data (3500K Color Temperature)
Dimming Options: Specify option by suffix (shown in bold-face type)Our White Paper regarding Linear vs. Logarithmic Operating Characteristics is available in our 'Downloads' section of our website, or you may request one my emailing [email protected]
Please specify input voltage when using a dimming option other than D8. E1= 120 volt, E2= 277 Volt.
DMX^ Dimming Options (interfaced through 0-10V driver)
PathWave^ Wireless Dimming Options (interfaced through 0-10V driver)
DMXD8 = DMX Xitanium 1% (linear) ^DMXDL8 = DMX Xitanium 1% (logarithmic) ^DMXELD = DMX EldoLED 0% (logarithmic)^DMXELD1 = DMX EldoLED 1% (logarithmic)^DMXELD2 = DMX EldoLED 0% (linear)^DMXELD3 = DMX EldoLED 1% (linear)^DMXLS = DMX/LumaStream .3% (logarithmic)^
PWVD8 = PathWave/Xitanium 1% 0-10V (linear)^PWVDL8 = PathWave/Xitanium 1% 0-10V (logarithmic)^PWVELD = PathWave/EldoLED 0% (logarithmic)^PWVELD1 = Pathwave/EldoLED 1% (logarithmic)^PWVELD2 = PathWave/EldoLED 0% (linear)^PWVELD3 = PathWave/EldoLED 1% (linear)^PWVLS = PathWave/LumaStream .3% (logarithmic)^
0-10V Dimming Options Lutron Dimming Options DALI Dimming Options
D8 = Xitanium 1% 0-10V (linear)*DL8= Xitanium 1% 0-10V (logarithmic)* ELD = EldoLED 0-10V 0% (logarithmic)ELD1 = EldoLED 0-10V 1% (logarithmic)ELD2 = EldoLED 0-10V 0% (linear)ELD3 = EldoLED 0-10V 1% (linear)
DE4 = Lutron Eco 1% (linear)D7 = Lutron 3 wire 1% (linear)DT1 = Lutron 2 wire 1% (linear)$
DAL = EldoLED DALI 0% (logarithmic)DAL1 = EldoLED DALI 1% (logarithmic)
* Xitanium driver (D8) is the standard dimming option and does not require that 120V input (E1) or 277V input (E2) to be specified. D8 dimming is the only option that is Energy Star qualified. All other dimming options did not pass the Energy Star requirements for start up time. For additional information, please contact our sales department.
^DMX, PathWave and 347V input (E3) options are not compatible with emergency battery options.$DT1 not available on model with a lumen designation of 5000.
Above Values reflect 3500K color temperatures. Scaling factors for other tempreratures: 2700K = .95 ; 3000K = 1.0 ; 4000K = 1.08
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
Catalog No. – 6VLFLX4000035KNF/6VLEDSPSCLNFSpacing Criteria – 0.68Delivered Lumens – 3598
AVERAGE LUMINANCE
CANDELA DISTRIBUTION
100 20 30
40
50
60
701524
3048
4572
6096
80
90
ANGLE CD/M2
45 13407
55 812
65 467
75 254
85 251
CANDELAZONAL LUMENS SUMMARY
Catalog No. – 6VLFLX4000035KNF/6VLEDMDSCLNFSpacing Criteria – 0.92Delivered Lumens – 3805
AVERAGE LUMINANCE
CANDELA DISTRIBUTION
100 20 30
40
50
60
701524
3048
4572
6096
80
90
ANGLE CD/M2
45 15654
55 1948
65 1127
75 593
85 314
CANDELAZONAL LUMENS SUMMARY
VERTICAL ANGLE 0
0 4565.9
5 4569.3
15 4252.2
25 2958.4
35 1040.3
45 202.1
55 20.4
65 8.7
75 2.8
85 .5
90 0
ZONE LUMENS % OF LUMINAIRE
0-30 2920.7 76.80
0-40 3592.4 94.40
0-60 3792.87 99.70
0-80 3804.36 100.00
0-90 3804.93 100.00
90-180 0.00 0.00
0-180 3804.93 100.00
VERTICAL ANGLE 0
0 6096
5 5936.6
15 4365.3
25 2217.7
35 988.9
45 173.1
55 8.5
65 3.6
75 1.2
85 .4
90 0
ZONE LUMENS % OF LUMINAIRE
0-30 2798.46 77.80
0-40 3410.21 94.80
0-60 3591.83 99.80
0-80 3597.92 100.00
0-90 3598.44 100.00
90-180 0.00 0.00
0-180 3598.44 100.00
Pathway Lighting Products, Inc., P.O. Box 591, Old Saybrook, CT 06475-0591voice 800.342.0592 • fax 800.207.0090 • www.pathwaylighting.com • e-mail: [email protected]
Available Reflector Finishes
Standard Hanger Bars
ClearSoft Specular “SCL”
PewterDiffused “EPW”
Soft Specular “SPW”
HazeDiffused “HAZ”
StrawDiffused “EST”
Soft Specular “SST”
BronzeDiffused “EBZ”
Soft Specular “SBZ”
WheatDiffused “EWT”
Soft Specular “SWT”
OPTIONS & ACCESSORIES
Our standard reflector finish is soft specular clear Alzak (SCL). Additional hues are noted to left. Several of these are of-fered in both a soft specular and a diffused/matte finish. For colors not shown, contact our sales department for advice on custom anodized finishes.
Specified suffix of desired finish.Example: 4VLEDSCL
Interlocking L-Bar hanger bars are now standard with all recessed Coventry Architectural lighting fixtures. Installer friendly features include:• L-Bars are fabricated from identical L-shaped cross sec-
tions that form a sturdy ½” by 1-1/2” C-channel profile for superior rigidity.
• Pre-marked with spacing locations for 24” T-bar; 16” and 24” joist ceilings (wood and metal).
• Extension locks with an easy-to-use integral twist tab. No separate fastener.
• Interlocking and expandable to 24”. Can be increased to 36” or 48” with the use of one additional bars.
• Allows for offset mounting.• Integral and barbed nail spike for wood joist ceilings.• Fits into the c-channel notches on our butterfly
mounting bracket.• Complete details including video demonstration is avail-
able at www.pathwaylighting.com.
To increase the included L-Bar set to a 36” length, order two model #015-954 and use one per side. To increase to a 48” length, order one #LBAR which is a complete set of four bars and use two per side.