product color : (k) black type
TRANSCRIPT
© Panasonic Corporation 2011, All rights reserved.
Unauthorized copying and distribution is a violation of
law.
MEX1105002CE
Speaker System
Model No. SB-AKX32Product Color : (K)... Black Type
TABLE OF CONTENTS
1 Service Navigation
1.1. System Information (SB-AKX32LM-K)
1.2. Front Speakers (SB-AKX32LM-K)
2 Specifications
3 Disassembly and Assembly Instructions
3.1. Disassembly of Front Panel Unit
3.2. Replacement of Speaker Connector Housing
4 Wiring Connection Diagram
5 Exploded View and Replacement Parts List
5.1. Cabinet Parts Location
5.2. (SB-AKX32LM-K) Packaging
5.3. Replacement Parts List
1 Service Navigation
1.1. System Information (SB-AKX32LM-K)SB-AKX32LM-K is use for the following main models:
SC-AKX32LM-K
1.2. Front Speakers (SB-AKX32LM-K)The illustrations for the speakers will be described in this manual.
• Disassembly and Assembly Instructions
• Wiring Connection Diagram
• Exploded View
• Replacement Parts List
2 Specifications
sanicob ed nóicceS
opiT
)sevarg sodinos ed ojelfer(asív 2 ed asnicob 2 ed ametsiS
)s(Bafle
mc 02 ed ocinóc opiT sevarg arap anicoB
soduga arap anicoB mc 6 ed ocinóc opiT
aicnadepmI 4
adilas ed acitsúca nóiserP )m 1( W/Bd 68
saicneucerf ed amaG
)Bd 61–( zHk 12 a zH 05
)Bd 01–( zHk 02 a zH 57
)frP x lA x nA( senoisnemiD
mm 532 x mm 414 x mm 052
Peso k 0,4 g
:atoN oiverp nis soibmac a satejus nátse senoicacificepse saL )1
.osiva.sodamixorpa nos senoisnemidsalyEl peso
rodazilana le noc edim es latot acinómra nóisrotsid aL )2.latigid ortcepse ed
4
3 Disassembly and Assembly Instructions“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
This section describes procedures for checking the operation and replacing the main components.
For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
Select items from the following index when checks or replacement are required.
Refer to the Parts No. on the page of “Exploded View and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sectionsDisassembly of Front Panel Unit
Disassembly of Tweeter Speaker (SP1)
Disassembly of Full Range Speaker (SP2)
5
3.1. Disassembly of Front Panel Unit
Step 1: Remove 4 screws.
Step 2: Insert flathead screwdriver into the grooves and apply
light force to push the Front Panel Unit as arrow shown.
Step 3: Insert a steel rule in between the Front Panel Unit and
Speaker Box Assembly.
Caution: Do not exert strong force as it may damage the Front Panel Unit.
Step 4: Detach the Front Panel Unit slightly as arrow shown.
Caution: Do not exert strong force as it may damage the wiring within.
Step 5: Detach the yellow (+) and black (-) speaker wires.
6
Step 6: Remove the Front Panel Unit.
3.1.1. Disassembly of Tweeter Speaker
(SP1)• Refer to “Disassembly of Front Panel Unit”.
Step 1: Remove 4 screws.
Step 2: Remove the Tweeter Speaker (SP1).
3.1.2. Disassembly of Full Range Speaker
(SP2)• Refer to “Disassembly of Front Panel Unit”.
Step 1: Remove 4 screws.
Step 2: Detach the red (+) and black (-) speaker wires.
Step 3: Remove the Full Range Speaker (SP2).
7
3.2. Replacement of Speaker Connector Housing
3.2.1. Disassembly
Step 1: Use a paper clip push the Speaker Wire head until it
hide inside the Speaker Connector Housing.
Step 2: Pull out the (+) and (-) speaker wire.
3.2.2. AssemblyStep 1: Use a pen knife slightly push up the speaker wire head
approximately 45 .
Step 2: Insert the (+) speaker wire into the (+) hole of the
Speaker Connector Housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the (-) speaker wire into the (-) hole of the
speaker connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 4: Pull both speaker wires gently to ensure they lock-in
firmly.
Note: Repeat step1 to 3 if the speaker wires come out.
8
4 Wiring Connection Diagram
9
5 Exploded View and Replacement Parts List
5.1. Cabinet Parts Location
SP2
SP1
7
6
5
5
5
5
55
5
5
4
4
4
4
3
3
3
3
2-1
2
1
a
a
b
b
c
c
d
d
SB-AKX32LM-K
CABINET DRAWINGS
10
5.2. (SB-AKX32LM-K) Packaging
SB-AKX32
SB-AKX32
SB-AKX32LM-K
FOR SC-AKX32
PACKAGING DRAWINGS
P2
P2
*P1POLYFOAM (TOP)RPNM0217T
POLYFOAM (BOTTOM)RPNM0217B
*P1
*P1
1 2 3 4 5 6 7 8 9
A
B
C
D
E
F
G
H
10 11 12 13
11
Safety Ref.
No.
Part No. Part Name &
Description
QTY Remarks
CABINET AND CHAS-
SIS
1 RYPM02851 FRONT PANEL ASS’Y 1
2 RKPM0135 SPEAKER BOX ASS’Y 1
2-1 KN-MSA-22-02 SPK CONNECTOR
HOUSING (WHITE)LF (P8)
1
3 RKA0072-KJ LEG RUBBER 4
4 XTB4+16AFJK SCREW 4
5 XTB4+10GFJ SCREW (SP1,SP2) 8
6 RMQM0131-A EVA PACKING 1
7 RQLM0415 SPEC LABEL 1
SP1 EAS6PH124J TWEETER SPEAKER 1
SP2 L0AA20A00017 20cm WOOFER UNIT 1
Safety Ref.
No.
Part No. Part Name &
Description
QTY Remarks
PACKING MATERIALS
P1 RPNM0217T/B POLYFOAM 1
P2 RPFM0049 MIRAMAT BAG 2