product characteristic -...
TRANSCRIPT
Design And Manufactur: ISO7121-1986 or ANSI B1634.
Size Scope: 1/2 - 8 (15-200mm)." "
The Maximum Working Pressure: 700psi M ).(5.0 Pa
The Maximum Working Temperature: Standard Type: 428 F C).° °(220
High Temperature Type: 932 F C).° °(500
Thermal Shock Resistance: Al O -122 F C) ZrO -188 F C)2 3 2° ° ° °(50 (87
SiC-167 F C) Si N -392 F C).° ° ° °(75 (2003 4
Allowing Maximum Leakage: Class shutoff, Per ANSI/FCI B16.104/FCI 70.2 /DIN 3230,Part3.Ⅳ
According to final customer need.
Structural Length: ISO5752,1982, ANSI/ASME B16,10.
Flange Dia.: ISO7005-1:1992, ANSI B16.5, DIN,JIS,BS.
Main parameter
PRODUCT CHARACTERISTIC
All spare parts from KOWOV series ceramic ball valve strictly have been
observed the ISO9001quality guarantee system in the manufacture and
the examination .
Recommended when nothing else will work in abrasive slurries, high
corrosives application.
5 diversified models based on different media, temperature and pressure
Contents
PRODUCT CHARACTERISTIC
VCERAMIC LINED CERAMIC BALL VAL E
PTFE LINED CERAMIC BALL VAL EV
CERAMIC CONTROL VALVE & CV VALUE CHART
FEP-LINED CERAMIC BALL VAL EV
MODEL NUMBER CODE SYSTEM
VALVE TORQUE
ELECTRIC OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
PNEUMATIC OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
FCCV3 MODEL AND TABLESPECIFICATION
NO LINED CERAMIC BALL VAL EV
CERAMIC MATERIAL PERFORMACE
CV FLUX VIA. OF CERAMIC BALL VALVE
MANUAL OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
19
8
6
5
4
2
18
16
14
13
12
11
1
10
1
INNER LINED CERAMIC HARD SEALING BALL VALVE
Structural style: Flange: According to DIN/ANSI/API/JIS,3-part flange type flowing ball valve
Application situation: Applied to any media, but HF (Hydrofluoric Acid), with ax. temperature 500 and ax. pressure 5.0 Mpa.
This valve has uncomparable advantages under using in high corrosion,and high attrition.
M °C M
Material CodeNO. Part Name
1 Flange WCB,CF8,CF8M
2 Seat Structure Ceramic
3 Structure Ceramic
4 Stem 304,316,Hastelloy-C,Monel metal
5 Gland Carbon Steel, 304ss
6 Spacing Ring Carbon Steel, 304ss
7 Handle Carbon Steel,304ss,WCB,CF8
8 Snap Ring 65Mn
9 Snap Ring 65Mn
10 Gland Bolt Carbon Steel, 304ss
11 Packing PTFE,Reinforced PTFE, Graphite
12 Ring Carbon Steel, 304ss
13 Washer PTFE,Reinforced PTFE
14 Ball Structure Ceramic
15 Inner Lined Structure Ceramic
16 O ring Rubber
17 Spring 3yc-7 Stainless, Incoel x750
18 Gasket PTFE,Reinforced PTFE
19 Body WCB,CF8,CF8M
20 Spring Washer 65Mn
21 Nut Carbon Steel, 304ss
22 Stud Bolt Carbon Steel, 304ss
Parts Name And Material
No.
1
2
Physical Property parameter
Crystal >85% cubic,
monoclinicIg.Loss 0.8%—1.0%
3 Average Dia. 0.4μm---0.7μm
4 Apparent Density >0.4g/cc
5 Tapped Density >0.8g/cc
6 ZrO Purity2 >99.95%The valve fits in granule medium of high hardness, or medium with erosive soft granule. Itis also the only valve suitable for this type of medium.They are widely used inpetrochemical industry, metallurgy, mining, power station, medicine and papermakingand so on.
Socket
Chemical Composition Content %
ZrO2 >94.0
SiO2
Na O2
TiO2 <0.01
7 Cl-
<0.01
8 K O2 <0.01
9 H O2 <0.05
NO.
1
6
Fe O2 3 <0.02
<0.005
4
5
<0.033
Y O32 5.4 0.1±2
32
The valve has the exceedingly high wear-proof capability, corrosion resisting, enduringcapability, good heat insulation, small thermal expansion.All parts that contact the mediaare made of structural ceramics with extremely high chemical stability and hardness(HRC 90) only inferior to diamond.
The ball is processed by advanced polishing equipment that can ensure high circularity,accuracy, good surface quality. The self-lubricating capability of Zr0 ensures the good
sealing performance.Thoroughly free from the defects that metal hard sealing has suchas big torque, non-corrosion-resistant sealing surface
2
ZrO KOWOV Ceramic Ball Values2 Composition Chart of
Excellent wearproof property of ceramic
enables this valve have high reliability
and prolonged lifespan, 2-4 times of
that of Titanium Alloy and Monel Metal
valve.
Interference fit between metal part and
ceramic part makes the whole part
stronger and more reliable,
becoming real ceramic-steel.
improves
the mechanical property of the ceramic,
Elastic washers can guarantee excellent
leakproofness at any time and avoid
blocking in media with impurities and
cracking of balls.
Comple te ly symmet r ic des ign can
ensure dual leak-proofness and two-
direction usage for double lifespan.
Unique design can ensure
closer sealing and prolonged
packing
service life.
A wide selection of stem materialop t i ons ava i l ab le i s 3 1 6 / 3 1 6 L ,
Has te l l oy -c Mone l meta l s t ruc tu receramic.
、
Structural style 3-part flange type flowing ball valve, Flange According to DIN/ANSI/API/JIS: ,
Application situation: Applied to media without particles, Max. Temperature 220 C, Max.Pressure 2.5Mpa,low-temperature and low-pressure.
°
INNER LINED PTFE CERAMIC BALL VALVES
Selecting different opening shape on the ceramic ball can get variable flux for easily automatic control.
Using mechanically inner-lined PTFE material with higher pressure resistance,
heat resistance and vacuum resistance
nner-lining. Ceramic material used for the ball center has the excellent
properties such as high toughness, high strength, high hardness, highly wear-
proof, high corrosion resistance and good self-lubricating, lower heat
conductivity and good surface quality (Ra 0.01 m). Free from easily aging and
sealing leakage, this kind of valve can be used for petrochemical,
pharmaceutical and water processing industry.
than those of the traditional inner-lining
can ensure the valves free from thin, non-uniform and easily desquamative
i
μ
INNER F-LINED CERAMIC BALL VALVES
Application situation Applied to media without particles, Max. Temperature 150°C, Max.Pressure 1.6Mpa,low-temperature and low-pressure.
:
Depending on different media, we can select different material for valve stem.A onel Metal T A Z A
Alternative materialsare 316L, Hashi lloy, M , itanium lloy, irconium lloy, etc.
FCCV3 uses FEP material for inner-lining, PTFE for valve seat and high-property
ceramics for ball cores. With excellent properties such as erosion resistance, non-
distortion, good sphericity and good sealing, this kind of valve is the bestchoice for
strongly erosive media without particles.
In strongly erosive media without particles and under 150 , FCCV3 is the best
choice with extremely high perfor
℃
mance & price ratio, after solving the problem of
leakage and short service life..
4 5
Structural style: 2-part flange type flowing ball valve.
Connection: Flange, According to DIN/ANSI/API/JIS .
STAINLESS STEEL HARD SEALING CERAMIC BALL VALVE
Structural style: 3-part flange type flowing ball valve.
Connection: Inner Screw,Butt Weld,Flange: According to DIN/ANSI/API/JIS .
Ceramic -ceramic main seal+ Graphite assistine seal, The application temperature canreach as high as 500 C.
O
It is the sole ceramic hard seal to reaches Class VI shutoff of seals standards in the world.
Application situation: Applied to any kind of media suitable for stainless steel.
Max. Temperature 500°C, Max. Pressure 5.0Mpa.
To effectively increase life of damageable parts of the valves is an effective way to improve
the quality of valves. In ball valve damageable part is the ball core and the valve stem,
because they are the movement parts In many。 application situations. Using the ceramic
ball core can increase valve life 3-6 times.
STAINLESS STEEL SOFT SEALING CERAMIC BALL VALVE
6 7Application industry : Steel mill, Power plant ,Gas transportation ,etc.
This kind of valve has excellent performance/price superiority at media with lower corrosion
and with particles and fibers or situations with high temperature.
The ball valve body has flat root to stiffly install hand-controlling facility, electrical &
pneumatic actuator and hydraulic facility.
Application to petrochemical industry.
Application situation: Applied to any kind of media without granule suitable for stainless steel.
Max. Temperature 220°C, Max. Pressure 7.0Mpa.
Structural style: 2-part flange type flowing ball valve.
Connection: Inner Screw,Butt Weld,Flange: According to DIN/ANSI/API/JIS .
By minimizing internal surface areas within all valves and fittings, thereby killer particle entrapment is
reduced.The valves are free from any particle, liquor, gas, oil, or contamination, With zero dead space and
no leakage.
Minimum cavity space minimizes the retention of line media within the body cavity so product
contamination problems are significantly reduced.
Main Industries Served
· Power Plants: FGD units, fly ash, lime & lime slurry, and gypsum, filtrate water with solids...
· Waste Incinerators: FGD, lime slurry, HCl scrubber water...
· Steel Production: coal powder injection, converter desulphurisation of melt, lime, silica, MgO ...
· Pulp & Paper: Kaolin, Bentointe, Talcum, Quartz, MgO , CaCO , other fillers, bleachers, pulp rejects,
NaOH, green liquor...
· Chemical Process Plants: acids, metal slurry, bases, polymers, TiO slurry, TiCl , FeCl , caustic, mixes....
· Pneumatic Conveying: sand, lime, glass, cement, ore, gypsum, powders...
· Fertiliser: Ammonium Nitrate, Phosphoric acids & solids
:
2
2 3
2 4 2
9
CERAMIC CONTROL VALVE
All interior body surfaces and the ball are made of solid ceramic for superior erosion/corrosion/abrasion
resistance.
In addition to the features and benefits that have made it the process industry s most preferred lined ball
valve worldwide, KOWOV offers the V-port ballValve for precise modulating control services.
'
Manual operation is available for all the electrical control valve and can be
selected for all the pneumatic control valve.
To meet the requirements of all customers, diversified kinds of actuators,
imported or domestic/pneumatic, electric or hydraulic, are available to be
installed steadily on the valve bodies, not affecting the leaking of the valve
stems.
Recommended for the most strict environment. Ceramic ball valve is thebest choice after solving the problem of heavy corrosion and wearing.
The ceramics have extremely high shock & erosion resistance to maintain controlling ability and sealing
property fora long time. So only with ceramic cores, can the ball valves be used as controlling ones.
DN Cv VALUE
FCCV1/FCCV2 FCCV/FCCV3
inch mm O-Port V60° V45° V30° O-Port V60° V45° V30°
1/2” 15 10.2 7 4 3 10.2 7 4 3
3/4” 20 10.2 7 4 3 18.2 12 8 5
1” 25 18.2 12 8 5 28.6 18 12 8
1 ”1/4 32 28.6 18 12 8 47 30 20 13
1 ”1/2 40 47 30 20 13 73 46 31 21
2” 50 73 46 31 21 114 72 48 32
2 ”1/2 65 114 72 48 32 181 115 76 51
3” 80 181 115 76 51 292 185 123 82
4” 100 292 185 123 82 456 289 192 128
5” 125 456 289 192 128 712 452 300 201
6” 150 712 452 300 201 1025 650 432 289
8” 200 1025 650 432 289 1822 1156 769 514
8
The following drive and accessory manufacturers are given preference:
• Auma / • EMG-Drehmo / • El-o-matic /• Festo / • Hydac / • Rotork
• Siemens / SIPOS / • Danfoss•
Optional V-port ball provides equal-percentage control for throttling abrasive/corrosive media, Can meet
different automatic control characteristic.
CV FLUX CHARACTERISTIC TABLE OF CERAMIC BALL VALVE
11
A Neglectable or no corrosion,and recommended for this service=<0.1 mmg/cm /day2
B Less or slight corrosion,Use with annual inspection=0.1~0.3 mmg/cm /day2
C Sign lflcant corrosion,Not recommended for valve use=>0.3 mmg/cm /day2
-- Test not completed due to violent corrosion
20%HCL 60°C A A A B A A A C C B
20%HCL 95°C A A A C A A A -- -- C
90%H SO2 4 60°C A A A A A A A C C B
90%H SO2 4 95°C A A A B A A A C C C
60%H PO3 4 60°C A A A C A A A C C A
60%H PO3 4 95°C A A A C A A A C C A
10%HF 60°C B C A A A A A C C B
46%HF 95°C C C A C A A A -- -- C
60%HNO3 60°C A A A C B A A A A C
60%HNO3 95°C B A A C B A A B B C
30%NaOH 60°C B A A B A A A A A A
30%NaOH 95°C B B A C A A A A B A
Temperature99.9%
AL O2 3
ZrO2 SiC Si N3 4 Graphite PTFE Fluororubber SS304 Ss316 HC
ANTI-CORROSIVE PERFORMANCE REFERENCE TABLE:
Y- ZrO2
Y-TZP
Mg- ZrO2
M-PSZ90 Al O2 3 95 Al O2 3 99 Al O2 3 Si N3 4 SiC
Common
ceramics
Carbide
alloy Steel
Density /g cm3
6.0~6.05 5.72~5.74 3.45~3.55 3.6~3.75 3.9~3.95 3.2~3.33 3.15~3.25 14~18 7.8
Hardness /HRA C 87 85 90 90 92 92 94 50~60 90 36
Flexural Strength
Mpa1150 900 350 370 450 1200 470 20~50 2000 804
Fracture Toughness
(KIC) Mpa m10~12 13~15 3.4 3.6 4.5 7 4 20 101
Compressive Strength
Mpa2000 1800 1700 2000 2200 2800 -- 4000 2000
Thermal Shock
Resistance C°87 110 -- -- 50 200 75 -- 500 500
Thermal Expansion
Coefficient °C×10-6/9.6 10 7.6 7.8 8.3 3.4 4 -- 7 12
Modulus of Elasticity
Gpa200 200 310 330 350 300 400 -- 600
Crushing Load
KN(Φ6mm)15 10 3.5 3.6 4 18 3.5 -- --
Using Temperature
°C<160 <1000 <1200 <1250 <1500 <1500 <1500 -- -- <560
Water Absorption 0 0 0.02% 0.01% 0.00% 0 0.50% 5~10% -- --
Corrosion Prevention Good Good Good Good Good Good Good Good Flooey Flooey
Data sources testing results or origianl documents announced.:
Properties Item
CERAMIC MATERIAL PERFORMANCE
THE TABLE OF CERAMIC CAPABILITY
3. ~3.50
*
10
Media
--
--
--
--
10
20
30
40
50
60
70
80
90
100
201 300 452
0 50 100 150 200 250 300 350 400 450 500
Cv Value
5”
0 100 200 300 400 500 600 700 800
10
20
30
40
50
60
70
80
90
100
650432289
Cv Value
6”
0 100 200 300 400 500 600 700 800 900 100011001200
10
20
30
40
50
60
70
80
90
100
514 769 1156
Cv Value
8”
Cv Value Cv Value Cv Value
0 1 2 3 4 5 6 7 8 9 10 11 12 1330
40
50
60
70
80
90
100
1285
3/4”
0 1 2 3 4 5 6 7 8 930
40
50
60
70
80
90
100
3 4 7
1/2”
0 2 4 6 8 10 12 14 16 18 2010
20
30
40
50
60
70
80
90
100
18128
1”
Cv Value Cv Value Cv Value
10
20
30
40
50
60
70
80
90
100
1157651
0 10 20 30 40 50 60 70 80 90 100 110 120
21/ ”2
10
20
30
40
50
60
70
80
90
100
82 123 185
0 20 40 60 80 100 120 140 160 180 200
3”
0 25 50 75 100 125 150 175 200 225 250 275 300
10
20
30
40
50
60
70
80
90
100
289192128
4”
Cv Value Cv Value Cv Value
10
20
30
40
50
60
70
80
90
100
302013
0 3 6 9 12 15 18 21 24 27 30 33
11/ ”2
10
20
30
40
50
60
70
80
90
100
21 31 46
0 5 10 15 20 25 30 35 40 45 50 55
1 4
3/ ”
0 10 20 30 40 50 60 70 80
10
20
30
40
50
60
70
80
90
100
724832
2”
Cv Value Cv Value Cv Value
FCCV 1 F MU C H 150 P Z Z 06 OF HC FG1
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1.Ball Valve Type: FCCV -- Ceramic Ball Valves
2 -- PTFE, 3 -- FEP
3.Type of Connection: F -- Flange; T -- Female Thread; W -- Butt weld; C -- Clamp
5.Control fashion: A -- On-off type; C -- Control type
6.Especial structure: A~Z -- To contact with factory to make determination When ordering
9.Ball material code: C -- WCB omit ; P -- 304 R -- 316; Z -- Zro Ceramic( ) ; 2
10.Seat material code: F -- ; - - ; - Graphite; S -- Carbide Alloy; Z -- ZrO CeramicPTFE T - R PTFE G - 2
12.Fashion of ball hole: OF -- Full Round Port; OS -- Reduced Round Port;
V1 -- 60°V-Port; V2 -- 45 V-Port; V3 -- 30 V-Port; V4 -- 90 V-Port; V5 -- 15 V-Port° ° ° °
14.Special requirement code: When ordering please relate the determination with our company.
MODEL NUMBER CODE SYSTEM
1312
Becareful !Becareful !
△p Torque Nm A B M1 L E F G M2 Φdt SW H h
inch mm 6bar 10bar 16bar
15 14 18 28 35 42 36 M5 12 30 42 16 M5 24 5 10 6 30 12
20 21 27 42 35 42 36 M5 12 30 42 16 M5 24 5 10 6 30 12
25 23 30 46 40 42 42 M5 15 30 42 16 M5 24 5 10 6 35 15
32 34 42 65 50 53 50 M6 20 40 52 17 M6 28 5 14 10 35 15
40 39 50 77 58 57 56 M6 20 46 56 19 M6 36 8 20 14 35 16
50 50 60 92 70 71 70 M8 20 54 70 22 M8 40 8 20 14 37 18
65 68 85 130 80 88 80 M8 20 60 75 22 M8 40 8 20 14 37 20
80 107 125 200 88 95 88 M10 20 60 75 24 M10 45 8 22 16 45 20
100 133 165 240 109 119 102 M10 22 70 86 26 M10 52 8 30 24 50 25
125 186 220 320 130 136 102 M12 22 80 110 30 M12 60 10 30 24 50 25
150 220 275 400 130 131 125 M12 22 80 110 30 M12 60 10 30 24 55 25
200 300 380 550 140 148 125 M12 22 80 110 30 M12 65 10 30 24 60 25
MAX WORKING PRESSURE WITHIN DIFFERENTTEMPERATURE IS ACCORDING TO ANSI B16.34
VALVE TESTING IS ACCORDING TO ANSI B16.104
Low Pressure Closure Test: 80psi (0.6 Mpa)
Each KOWOV valve mustbe done the seal and shellPressure test ing beforeleaving our factory
VALVE TORQUE AND
ACTUATOR
CONNECTION
DIMENSION:
Tem.℃ PN16 PN25 PN40 CLASS150 CLASS300 JIS 10K JIS 20K
WCB CF8 WCB CF8 WCB CF8 WCB CF8 WCB CF8 WCB CF8 WCB CF8
20 1.6 1.52 2.5 2.38 4.0 3.8 1.93 1.81 5.0 4.96 1.37 1.30 3.64 3.46
100 1.6 1.31 2.5 2.15 4.0 3.44 1.93 1.56 5.0 4.54 1.37 1.18 3.64 3.12
150 1.57 1.29 2.45 2.01 3.9 3.22 1.89 1.53 4.89 4.28 1.34 1.11 3.56 2.94
200 1.52 1.21 2.38 1.89 3.8 3.02 1.83 1.45 4.84 4.03 1.30 1.04 3.45 2.77
250 1.44 1.13 2.25 1.77 3.6 2.83 1.73 1.34 4.48 3.73 1.23 0.98 3.28 2.56
Max. Working Pressure (Mpa)
4-M1 L
F E
A
B
2-M2
SW
D
K
G
hH
d
PI -- Double-acting Pneumatic actuator; PJ -- Double-acting actuator with worm wheel ;
4.Driving Manner: BS -- Bare Stem; MU -- Manul; WW -- Worm Wheel; EI -- Electric 220VAC;
EJ -- Electric 380VAC; EK -- Electric 110VAC; EL -- Electric 24VDC;
DN
�Especially indicate: FCCV1 / FCCV2 in KOWOV ceramic ball valve hasbeen adopted Reduced Port type, Please according to Cv of actual workingenvironment fluid to choose the suitable diameter.
�Especially indicate: FCCV1 / FCCV2 in KOWOV ceramic ball valve hasbeen adopted Reduced Port type, Please according to Cv of actual workingenvironment fluid to choose the suitable diameter.
8.Body material code: W -- WCB I -- Cr5Mo P-- SS304 R -- Ss316; ; ;
11.DN: 01-15mm (1/2 ); 02-20mm(3/4 ); 03-25mm(1 ); 04-32mm(1 / ); ; ;" " " " 05-40mm(1 / ") 06-50mm(2")1
4
1
2
07-65mm(2 / ); 08-80mm(3 ); ; ; ;1
2" " 09-100mm(4") 10-125mm(5") 11-150mm(6") 12-200mm(8")
7.Norminal pressure: 16~40 -- DIN PN1.6~4.0Mpa; 150~300 -- ANS 150~300LB; 10~20k -- JIS 10 20K-
PK -- Spring-return Pneumatic actuator; PJ -- Spring-return actuator with worm wheel ;
-- Hydnamic actuator.HY
2. ( ) 1--Innner Lining Material Code: N-Without Inner Lining omit ; Structure Ceramic;
13.Stem material code: R -- 316; RL -- 316L; M -- Monel alloy; HC -- Hastelloy C; HB -- Hastelloy B;
T -- Titanium Alloy; Z -- Zirconia Alloy; C -- CeramicZro2
Shell Strength: 1.5*Max Working pressure psi(MPa)
Closure Test: 1.1*Max Working pressure psi(MPa)
ΦK ΦD
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
L W H
DIN PN10 Flange Dia. JIS 10K Flange Dia.
dnmmInch
15 15 108 160 85 45 65 95 4-M12 14 2 52 70 95 4-M12 12 1 2.9
20 15 117 94 55 75 105 14 2 58 75 100 4-M12 14 1 3.4
25
25
127 100 65 85 115 14 2 70 90 125 4-M16 14 1 4.3
32
32
140 114 78 100 135 16 2 80 100 135 4-M16 16 2 6.8
40
40
165 121 85 110 145 16 2 85 105 140 4-M16 16 2 9.3
50 178 140 100 125 160 16 3 100 120 155 4-M16 16 2 12.6
65 50 190 158 120 145 180 4-M16 18 3 120 140
185
4-M16 18 2 14.9
80 65 203 176 135 160 195 8-M16 20 3 130 150
210
8-M16 18 2 22.3
100 80 229 202 155 180 215 8-M16 20 3 155 175
250
8-M16 18 2 30
125 100 254 252 185 210 245 22 3 185 210
280
8-M20 20 2 41
150 100 267 276 210 240 280 24 3 215 240
330
8-M20 22 2 54
200 150 292 293 265 295 335 26 3 265 290 12-M20 22 2 76
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 N-M T f
160
230
230
320
320
400
320 173
8-M16
8-M20
12-M20
108 45 65 95 4-M12 14 2 35 60.5 89 11 1.6
117 55 75 105 14 2 43 70 98 11 1.6
127 65 85 115 14 2 51 79.5 108 11 1.6
140 78 100 135 16 2 64 89 117 13 1.6
165 85 110 145 16 3 73 98.5 127 14 1.6
178 100 125 160 16 3 92 120.5 152 16 1.6
190 120 145 180 4-M16 18 3 105 139.5 178 18 1.6
203 135 160 195 8-M16 20 3 127 152.5 190 19 1.6
229 155 180 215 8-M16 20 3 157 190.5 229 24 1.6
254 185 210 245 8-M16 22 3 186 216 254 24 1.6
267 210 240 280 8-M20 24 3 216 241.5 279 25 1.6
292 265 295 335 12-M20 26 3 270 298.5 343 29 1.6
4-M12
4-M12
4-M12
4-M12
4-M12
4-M16
4-M16
4-M16
8-M16
8-M20
8-M20
8-M20
85
94
100
114
121
140
158
176
202
252
276
293
160
160
230
230
320
320
400
320
f N-M
Dn
D2
D1
D3
W
T
H
L
dn
1514
Remarks: KOWOV ceramic ball valve with nominal diameter larger than Dn100 allmatched with worm wheel manual operation
108 160 85 45 65 95 4-M12 16 2 52 70 95 4-M12 14 1
117 94 55 75 105 16 2 58 75 100 4-M12 16 1
127 100 65 85 115 16 2 70 90 125 4-M16 16 1
140 114 78 100 135 18 2 80 100 135 4-M16 18 2
165 121 85 110 145 18 3 85 105 140 4-M16 18 2
178 140 100 125 160 20 3 100 120 155 8-M16 18 2
190 158 120 145 180 8-M16 22 3 120 140
200
8-M16 20 2
203 176 135 160 195 8-M16 22 3 135 160
225
8-M20 22 2
229 202 160 190 230 8-M20 24 3 160 185
270
8-M20 24 2
254 252 188 220 270 28 3 195 225
305
8-M24 26 2
267 276 218 250 300 30 3 230 260
350
28 2
292 293 278 310 360 34 3 275 305 30 2
160
230
230
320
320
400
320 175
45 65 95 4-M12 16 2 35 66.5 95 15 1.6
55 75 105 16 2 43 82.5 117 16 1.6
65 85 115 16 2 51 89 124 18 1.6
78 100 135 18 2 64 98.5 133 19 1.6
85 110 145 18 3 73 114.5 156 21 1.6
100 125 160 20 3 92 127 165 22 1.6
120 145 180 8-M16 22 3 105 149.5 190 25 1.6
135 160 195 8-M16 22 3 127 168 210 29 1.6
160 190 230 8-M20 24 3 157 200.5 254 32 1.6
188 220 270 28 3 186 235 279 35 1.6
218 250 300 30 3 216 270.5 318 37 1.6
282 320 375 38 3 270 330 381 41 1.6
4-M12
4-M16
4-M16
4-M16
4-M20
8-M16
8-M20
8-M20
8-M20
12-M20
90
100
105
120
128
146
165
185
210
265
290
308
3.5
4.1
5.2
8.2
11.3
15.1
17.9
26.8
36
49
65
93
160
160
230
230
320
320
400
320
20
8-M24
8-M24
12-M24
12-M24
12-M24
108
117
127
140
165
178
190
203
229
254
267
292
8-M24
8-M24
12-M27
8-M20
12-M24
2.9
3.4
4.3
6.8
9.3
12.6
14.9
22.3
30
41
54
76
2.9
3.4
4.3
6.8
9.3
12.6
14.9
22.3
30
41
54
76
— —FMU 10/10K
— —FMU 16/150
— —FMU 25/20K
— —FMU 40/300
MANUAL OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
4-M16
4-M16
4-M16
4-M12
4-M12
DN KgFigure Size
L W H
DIN PN16 Flange Dia. ANSI CLASS 150 Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
L W H
DIN PN25 Flange Dia. JIS 20K Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M16
4-M16
4-M16
4-M12
4-M12
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
L W H
DIN PN40 Flange Dia. ANSI CLASS 300 Flange Dia.
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
1716
ELECTRIC OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
108 45 65 95 4-M12 16 2 52 70 95 4-M12 14 1
117 55 75 105 16 2 58 75 100 4-M12 16 1
127 65 85 115 16 2 70 90 125 4-M16 16 1
140 78 100 135 18 2 80 100 135 4-M16 18 2
165 85 110 145 18 3 85 105 140 4-M16 18 2
178 100 125 160 20 3 100 120 155 8-M16 18 2
190 120 145 180 8-M16 22 3 120 140
200
8-M16 20 2
203 135 160 195 8-M16 22 3 135 160
225
8-M20 22 2
229 160 190 230 8-M20 24 3 160 185
270
8-M20 24 2
254 188 220 270 28 3 195 225
305
8-M24 26 2
267 218 250 300 30 3 230 260
350
28 2
292 278 310 360 34 3 275 305 30 2
175
45 65 95 4-M12 16 2 35 66.5 95 15 1.6
55 75 105 16 2 43 82.5 117 16 1.6
65 85 115 16 2 51 89 124 18 1.6
78 100 135 18 2 64 98.5 133 19 1.6
85 110 145 18 3 73 114.5 156 21 1.6
100 125 160 20 3 92 127 165 22 1.6
120 145 180 8-M16 22 3 105 149.5 190 25 1.6
135 160 195 8-M16 22 3 127 168 210 29 1.6
160 190 230 8-M20 24 3 157 200.5 254 32 1.6
188 220 270 28 3 186 235 279 35 1.6
218 250 300 30 3 216 270.5 318 37 1.6
282 320 375 38 3 270 330 381 41 1.6
4-M12
4-M16
4-M16
4-M16
4-M20
8-M16
8-M20
8-M20
8-M20
12-M20
8-M24
8-M24
12-M24
12-M24
12-M24
108
117
127
140
165
178
190
203
229
254
267
292
8-M24
8-M24
12-M27
8-M20
12-M24
— —FEI 25/20K
— —FEI 40/300
L W H
DIN PN25 Flange Dia. JIS 20K Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
L W H
DIN PN40 Flange Dia. ANSI CLASS 300 Flange Dia.
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
L W H
DIN PN10 Flange Dia. JIS 10K Flange Dia.
dnmmInch
15 15 108 45 65 95 4-M12 14 2 52 70 95 4-M12 12 1
20 15 117 55 75 105 14 2 58 75 100 4-M12 14 1
25
25
127 65 85 115 14 2 70 90 125 4-M16 14 1
32
32
140 78 100 135 16 2 80 100 135 4-M16 16 2
40
40
165 85 110 145 16 2 85 105 140 4-M16 16 2
50 178 100 125 160 16 3 100 120 155 4-M16 16 2
65 50 190 120 145 180 4-M16 18 3 120 140
185
4-M16 18 2
80 65 203 135 160 195 8-M16 20 3 130 150
210
8-M16 18 2
100 80 229 155 180 215 8-M16 20 3 155 175
250
8-M16 18 2
125 100 254 185 210 245 22 3 185 210
280
8-M20 20 2
150 100 267 210 240 280 24 3 215 240
330
8-M20 22 2
200 150 292 265 295 335 26 3 265 290 12-M20 22 2
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 N-M T f
173
8-M16
8-M20
12-M20
108 45 65 95 4-M12 14 2 35 60.5 89 11 1.6
117 55 75 105 14 2 43 70 98 11 1.6
127 65 85 115 14 2 51 79.5 108 11 1.6
140 78 100 135 16 2 64 89 117 13 1.6
165 85 110 145 16 3 73 98.5 127 14 1.6
178 100 125 160 16 3 92 120.5 152 16 1.6
190 120 145 180 4-M16 18 3 105 139.5 178 18 1.6
203 135 160 195 8-M16 20 3 127 152.5 190 19 1.6
229 155 180 215 8-M16 20 3 157 190.5 229 24 1.6
254 185 210 245 8-M16 22 3 186 216 254 24 1.6
267 210 240 280 8-M20 24 3 216 241.5 279 25 1.6
292 265 295 335 12-M20 26 3 270 298.5 343 29 1.6
4-M12
4-M12
4-M12
4-M12
4-M12
4-M16
4-M16
4-M16
8-M16
8-M20
8-M20
8-M20
20
-- —FEI 10/10K
— —FEI 16/150
4-M16
4-M16
4-M16
4-M12
4-M12
DN KgFigure Size
L W H
DIN PN16 Flange Dia. ANSI CLASS 150 Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M16
4-M16
4-M16
4-M12
4-M12
5.9
6.4
7.3
9.8
13.6
16.9
23.4
30.8
40.5
51.5
66
88
160 233
242160
248160
262160
269196
288196
306255
255 362
388255
438255
462255
479255
13.6
16.9
23.4
30.8
40.5
51.5
5.9
6.4
7.3
9.8
66
88
233
242
248
262
269
288
306
362
388
438
462
479
160
255
160
160
160
196
196
255
255
255
255
255
160
160
160
160
196
196
255
255
255
255
255
255
233
242
248
262
269
288
306
362
388
438
462
479
5.9
6.4
7.3
9.8
13.6
16.9
23.4
30.8
40.5
51.5
66
88
160
160
255
255
255
255
255
160
196
160
196
255
238
248
253
268
276
294
313
371
396
451
476
494
6.8
7.1
8.2
11.2
15.6
19.4
26.4
35.3
46.5
60
77
105
H
L
W
D2
D3
Dn
D1
KOWOV
KOWOV
KOWOV
KOWOV
1918
PNEUMATIC OPERATED FCCV1/2 MODEL AND TABLESPECIFICATION
108 45 65 95 4-M12 16 2 52 70 95 4-M12 14 1
117 55 75 105 16 2 58 75 100 4-M12 16 1
127 65 85 115 16 2 70 90 125 4-M16 16 1
140 78 100 135 18 2 80 100 135 4-M16 18 2
165 85 110 145 18 3 85 105 140 4-M16 18 2
178 100 125 160 20 3 100 120 155 8-M16 18 2
190 120 145 180 8-M16 22 3 120 140
200
8-M16 20 2
203 135 160 195 8-M16 22 3 135 160
225
8-M20 22 2
229 160 190 230 8-M20 24 3 160 185
270
8-M20 24 2
254 188 220 270 28 3 195 225
305
8-M24 26 2
267 218 250 300 30 3 230 260
350
28 2
292 278 310 360 34 3 275 305 30 2
175
45 65 95 4-M12 16 2 35 66.5 95 15 1.6
55 75 105 16 2 43 82.5 117 16 1.6
65 85 115 16 2 51 89 124 18 1.6
78 100 135 18 2 64 98.5 133 19 1.6
85 110 145 18 3 73 114.5 156 21 1.6
100 125 160 20 3 92 127 165 22 1.6
120 145 180 8-M16 22 3 105 149.5 190 25 1.6
135 160 195 8-M16 22 3 127 168 210 29 1.6
160 190 230 8-M20 24 3 157 200.5 254 32 1.6
188 220 270 28 3 186 235 279 35 1.6
218 250 300 30 3 216 270.5 318 37 1.6
282 320 375 38 3 270 330 381 41 1.6
4-M12
4-M16
4-M16
4-M16
4-M20
8-M16
8-M20
8-M20
8-M20
12-M20
8-M24
8-M24
12-M24
12-M24
12-M24
108
117
127
140
165
178
190
203
229
254
267
292
8-M24
8-M24
12-M27
8-M20
12-M24
— —FPI 25/20K
— —FPI 40/300
L W H
DIN PN25 Flange Dia. JIS 20K Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
L W H
DIN PN40 Flange Dia. ANSI CLASS 300 Flange Dia.
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M12
4-M16
4-M16
4-M16
4-M16
L W H
DIN PN10 Flange Dia. JIS 10K Flange Dia.
dnmmInch
15 15 108 45 65 95 4-M12 14 2 52 70 95 4-M12 12 1
20 15 117 55 75 105 14 2 58 75 100 4-M12 14 1
25
25
127 65 85 115 14 2 70 90 125 4-M16 14 1
32
32
140 78 100 135 16 2 80 100 135 4-M16 16 2
40
40
165 85 110 145 16 2 85 105 140 4-M16 16 2
50 178 100 125 160 16 3 100 120 155 4-M16 16 2
65 50 190 120 145 180 4-M16 18 3 120 140
185
4-M16 18 2
80 65 203 135 160 195 8-M16 20 3 130 150
210
8-M16 18 2
100 80 229 155 180 215 8-M16 20 3 155 175
250
8-M16 18 2
125 100 254 185 210 245 22 3 185 210
280
8-M20 20 2
150 100 267 210 240 280 24 3 215 240
330
8-M20 22 2
200 150 292 265 295 335 26 3 265 290 12-M20 22 2
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 N-M T f
173
8-M16
8-M20
12-M20
108 45 65 95 4-M12 14 2 35 60.5 89 11 1.6
117 55 75 105 14 2 43 70 98 11 1.6
127 65 85 115 14 2 51 79.5 108 11 1.6
140 78 100 135 16 2 64 89 117 13 1.6
165 85 110 145 16 3 73 98.5 127 14 1.6
178 100 125 160 16 3 92 120.5 152 16 1.6
190 120 145 180 4-M16 18 3 105 139.5 178 18 1.6
203 135 160 195 8-M16 20 3 127 152.5 190 19 1.6
229 155 180 215 8-M16 20 3 157 190.5 229 24 1.6
254 185 210 245 8-M16 22 3 186 216 254 24 1.6
267 210 240 280 8-M20 24 3 216 241.5 279 25 1.6
292 265 295 335 12-M20 26 3 270 298.5 343 29 1.6
4-M12
4-M12
4-M12
4-M12
4-M12
4-M16
4-M16
4-M16
8-M16
8-M20
8-M20
8-M20
20
-- —FPI 10/10K
— —FPI 16/150
4-M16
4-M16
4-M16
4-M12
4-M12
DN KgFigure Size
L W H
DIN PN16 Flange Dia. ANSI CLASS 150 Flange Dia.
dnmmInch
15 15
20 15
25
2532
3240
4050
65 50
80 65
100 80
125 100
150 100
200 150
1/2”
3/4”
1”
1 /1
4”
1 /1
2”
2”
2 /1
2”
3”
4”
5”
6”
8”
D1 D2 D3 N-M T f D1 D2 D3 T f
20
DN KgFigure Size
N-M
4-M16
4-M16
4-M16
4-M12
4-M12
168 198 6.0
168 207 6.7
204 235 8.6
204 242 11.2
260 261 15.3
260 270 18.6
268 302 22
298 332 32
298 355 41
390 406 57
458 503 70
458 527 99
168 198
168 207
204 235
204 242
260 261
260 270
268 302
298 332
298 355
390 406
458 503
458 527
6.0
6.7
8.6
11.2
15.3
18.6
22
32
41
57
70
99
168 203 6.8
168 213 7.4
204 231 9.5
204 246 12.5
260 273
21260 293
17.3
268 328 25
298 366 37
298 394 46
390 445 65
458 541 89
458 586 117
168 198
168 207
204 235
204 242
260 261
260 270
268 302
298 332
298 355
390 406
458 503
458 527
6.0
6.7
8.6
11.2
15.3
18.6
22
32
41
57
70
99
H
L
Dn
D2
D1
D3
W
KOWOV
KOWOV
KOWOV
KOWOV