product catalogue - titan-omsk.ru · the main production site of the company is located on the...

PRODUCT CATALOGUEPetrochemical production

WE CREATE COnDiTiOns fOR GROWTh

3

COMPANY PROFILE

Group of Companies “Titan”The Group of Companies “Titan” is the largest Siberian company, one of the key investors of Omsk region. It was founded in 1989 by Mikhail Sutyaginsky.

It includes about 20 enterprises.

EnTERPRisEs Of ThE PETROChEmiCAL COmPLEx PJsC “Omsky kauchuk” (production of synthetic rubbers, organic synthesis products, high-octane fuel components

and other products of hydrocarbon raw material refining); “Poliom”, Ltd. – is the Joint-Venture of the GC “Titan”, SIBUR and “Gazprom Neft” (polypropylene production); novocherkassk Lubricant Production Plant Co., Ltd (production of plastic lubricants and oils).

EnTERPRisEs Of ThE AGRO-inDUsTRiAL COmPLEx “Titan-Agro” Ltd. (agro-industrial complex investment project implementation), including three structural subdivisions:

pig-breeding complex “Petrovsky”, feed mill “Pushkinsky”, meat processing plant “Pushkinsky”.

EnTERPRisEs AnD DivisiOns Of ThE infRAsTRUCTURE Thermal power station; investkhimprom Co., Ltd (motor road cargo transportation); “Titan-inter-Trade”, Ltd. (export sales of petrochemical products).

4

COMPANY PROFILE

Omsk

The range of products and rendered services includes about 200 items.

The products of the Group of Companies “Titan” are in demand by consumers and occupy significant shares in the total Russian consumption: more than 30% of the Russian market of SKMS rubbers; about 30% of the Russian MTBE market; about 20% of the Russian polypropylene market.

The products comply with international quality standards.

The main production site of the company is located on the territory of Omsk region; affiliated and dependent organizations are represented in Russia (Moscow, Saint-Petersburg, Republic of Bashkortostan, Rostov region etc.) and CIS countries. The number of employees of the Group of Companies is about 5000 people.

The integrated management system has been introduced at the enterprises of the GC “Titan” as well as at “Poliom”, Ltd (Joint-Venture of the GC “Titan”, SIBUR and “Gazprom Neft”) that meets the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001. The formation of consolidated financial statements is carried out in accordance with the international financial Reporting standards (ifRs).

Throughout the course of its history “Titan” supports children’s and mass sports, veteran organizations, educational and cultural institutions and provides significant assistance to the region in the implementation of social programs.

Improving the material, technical and raw material base, guided by advanced technologies the GC “Titan” provides a high potential to satisfy the needs of partners. “We create conditions for growth” – this is the company’s slogan.

5

COMPANY PROFILE

mTBEBelarusKazakhstanKirghiziaLatviaMongoliaUkraineFinland

sBRBelarusBulgariaBrazilIndiaKazakhstanChinaMalaysiaPakistanPeruPolandRomaniaSerbiaSlovakiaTaiwanTurkeyUkraine

PPBelgiumBulgariaGermanyGreeceEgyptIsraelItalyChinaLithuaniaPolandSerbiaSlovakiaTurkeyFinlandEstonia

LPG AbkhaziaBelarusHungaryKazakhstanChinaLatviaMongoliaNetherlandsPolandRomaniaTurkeyUkraineFinland

invEsTmEnT PROJECTs Of ThE GC “TiTAn”On the territory of Omsk region at the initiative of the “GC “Titan” and with the support of the Government of Omsk region the projects are being implemented aimed at creating new high-technology industries, including on the terms of the public-private partnership with the asset attraction of the State Corporation “Bank for Development and Foreign Economic Affairs (Vnesheconombank)”. Since 2010 more than 25 billion rubles have been attracted to the region’s economy.

imPLEmEnTED PROJECTs (sinCE 2010): normal butylene processing unit; polypropylene production plant; pig-breeding complex “Petrovsky”; meat processing plant “Pushkinsky”; feed mill “Pushkinsky”.

PROJECTs AT sTAGE Of imPLEmEnTATiOn: technical re-equipment of phenol-acetone production with the transfer

to zeolitic alkylation of cumene and isopropyl alcohol (IPA) production; increase of the MTBE production capacity to 330 thousand tons per year; production of epoxy resins creation of the complex for the production of PET pellets

and BOPET films; technical re-equipment of the ethylene production unit (EP-25); construction of combined cycle gas turbine unit (PGU-120); extension of feedstock and commodity tank farms; transport and logistics network upgrading; production of specialty chemicals.

PROmisinG PRODUCTs Of ThE GC “TiTAn” amino acids acetone isopropyl alcohol composite materials propylene copolymers phenol enzymes ETBE DDGS BOPET films PET pellets

sALEs GEOGRAPhy

aviation oils: motor, hydraulic, transmission oils

PVC plasticizer special purpose grease metalworking fluids parting fluids for stamping drilling fluid bases friction modifiers

6

COMPANY PROFILE

We createconditions

for growth

AChiEvEmEnTsThe Group of Companies “Titan”: since the year 2006 it has been included in competent federal ratings,

such as Forbes, RAEX, RBK TOP 500 and others; is regularly included in the top 10 largest regional taxpayers

to the budgets of different levels.

DiPLOmAs AnD AWARDs grand prix for the contribution to the petrochemical industry

development of the Russian Federation; diplomas and medals of international exhibitions “Chemistry”,

“Tires, general mechanical rubber goods, rubbers”; diplomas of the contest “100 best goods of Russia”; title “The Best Russian Exporter”; distinction marks for active investment activity on the territory

of Omsk region; All-Russian award “Ecological development - Evolution Awards» –

the Best producer of environmentally efficient equipment.

JsC “GC “TiTAn” 22, Gubkin Ave., the city of Omsk, 644035tel.: +7 (3812) 29-95-55, 35-69-31fax: +7 (3812) 35-69-32e-mail: [email protected] www.titan-omsk.ru

sALEs in RUssiA

sales Department tel.: +7 (3812) 29-95-55e-mail: [email protected]

marketing Department тел.: +7 (3812) 29-95-55 (ext. 55-50)e-mail: [email protected]

ExPORT sALEs

“Titan-inter-Trade”, Ltd. tel.: +7 (3812) 92-54-75, 29-95-55е-mail: [email protected]

Contacts

7

PJSC “Omsky kauchuk”EnTERPRisE PROfiLE

The PJSC “Omsky kauchuk” traces its history from October 24, 1962. At present the company employs more than 3000 workers, output of petrochemical processing and organic synthesis products has been organized: various types of rubbers, commodity latexes, high-octane fuel components, including methyl-tret-butyl ether and other types of products.

The management system has been available at the PJSC “Omsky kauchuk” since the year 2006 in conformity with the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001.

The plant holds one of the leading positions among Russian producers of synthetic rubber. Throughout the entire history the company’s products were frequently honored with highest awards. The plant was the first in Russia to master the method of salt-free coagulation applied in the production of rubbers. The plant’s products (phenol, acetone, rubbers) were frequent winners in the contest “100 best goods of Russia”. The plant product quality is oriented towards the EU specification and is in full conformity with it. MTBE, normal butane, butadiene, alphamethylstyrene, acetone, phenol, propylene, isopropylbenzene are registered in accordance with the requirements of REACH regulations.

Address: 30, Gubkin Ave., the city of Omsk, 644035telephones: +7(3812) 697-000fax: +7(3812) 641-011e-mail: [email protected]

8

PRODUCTS OF THE PJSC “OMSKY KAUCHUK”

sBR / BUTADiEnE-mEThyLsTyREnE RUBBERssBR-1712, GOST 15628-79 first qualitysBR-1705, GOST 11138-78 first quality, group 1, group 2sBR-1500, GOST 15627-79 first qualitysBR-1502, GOST 23492-83 first quality, group 3

Application

SBR-1500, SBR-1502 rubbers are used in the tyre industry and for the production of mechanical rubber goods. SBR-1502 is used in the production of rubber mechanical goods and in the footwear industry.

Specifications SBR-1712 SBR-1705 SBR-1500 SBR-1502

Mooney viscosity MB 1+4 (100°С)• quality 1 group 1• quality 1 group 2

47-5736-4445-54

47-56

48-58

Nominal tensile strength, MPa (kgf/cm2), minimum• quality 1 group 1• quality 1 group 2

22.0 (225)

23.5 (240)24.5 (250)

27.9 (285)

26.5 (270)

Mass fraction of organic acids, %, max. 4.0-5.6 5.0-6.7 5.0-6.5 5.0-7.2

Mass fraction of oil PN-6К, % 26.5-29.0 14.0-17.0 – –

Mass fraction of the bound second monomer (alphamethylstyrene), % 22.0-25.0 21.0-24.0 22.5-24.5 22.0-25.0

Packing and transportation

Railway wagons, truck trailers, containers (40’HC)

Product packing variants:• paper bags – 30 kg• wooden pallets – 450 kg• plastic containers – 540 kg• metal containers – 1260 kg

9


sBR / BUTADiEnE-mEThyLsTyREnE RUBBERssBR-1706 TDAE, Technical Specifications (TU) 22 9435-063-05766793-12 sBR-1723 TDAE, Technical Specifications (TU) 22 9435-064-05766793-12


Railway wagons, truck trailers, containers (40’HC)

Product packing variants:• paper bags – 30 kg• wooden pallets – 450 kg• plastic containers – 540 kg• metal containers – 1260 kg

Application

SBR 1706 / 1723 TDAE rubbers are manufactured using low-toxic (“green”) oil, they are applied in the tyre industry and for the production of rubber mechanical goods.

Specifications SBR-1706 TDAE SBR-1723 TDAE

Premium First Premium First

Mooney viscosity MB 1+4 (100°С)• quality 1 group 1• quality 1 group 2

37-4445-54

36-4445-54

47-57 46-58

Nominal tensile strength, MPa (kgf/cm2), minimum• quality 1 group 1• quality 1 group 2

21.0 (215)22.0 (225)

20.6 (210)21.6 (220)

18.6 (190) 17.6 (180)

Mass fraction of organic acids, %, max. 5.0-6.7 3.7-5.6

Mass fraction of oil, % 14.5-17.0 14.0-17.0 26.5-29.0 26.0-29.0

Mass fraction of the bound second monomer (alphamethylstyrene), % 21-24

10


Latex grade, GOST/TU*

Monomer ratio Purpose Indicators, shelf life

Butadiene-styrene

sKs-65GPGOST 10564-75

35:65butadiene : styrene

for the production of water-dispersion paints and application in the light, paper industry, in the production of construction materials

• dry residue ≥48%• рН 11.5-12.5 units• σ ≤48 mN/m• 12 months

sKs-65GPBTU 38.103111-83

• dry residue ≥44%• рН 10-13.0 units• σ ≤48 mN/m• 6 months

Bs-50GOST 15080-77


for carpet finishing in the mixture with latex BS-85, for the production of sealing paste

• dry residue ≥47%• рН ≥10.5 units• σ ≤45 mN/m• viscosity 12-16 s.• 6 months

Bs-85TU 38.103229-84


for carpet finishing in the mixture with latex BS-50

• dry residue ≥47%• рН ≥9.5 units.• σ ≤60 mN/m• viscosity ≤22 s.• 6 months

Bms-50KPTU 9491-36-05766793-94

50:50 butadiene : α-methylstyrene

in the production of cardboard • dry residue ≥35%• рН 9.5-10.5 units• σ ≥50 mN/m• viscosity – optionally• Defo stiffness 1000-2500 gf• fabric adhesive strength

by latex ≥0.35 MPa• 12 months

sKms-65GPTU 9491-33-05766793-93

35:65butadiene : α-methylstyrene

for the production of emulsion paints, in the production of construction materials

• dry residue ≥47%• рН 11.0-12.5 units• σ ≤48 mN/m• 12 months

synThETiC LATExEs

Application

Latexes are used in the production of water-dispersion paint coating materials, in the paper industry, in the productionof construction materials.Latexes of grades SKS-65GP, SKS-65GPB, BS-50, BS-85, BS-65N, BSK-70/2 are ready to be offered.Latexes of grades BMS-50KP, SKMS-65GP, LSK-1V, SKS-75K, SKD-15, BS-65K-3, BMK-65/1 are under development.

*Technical Specifications

11


LsK-1vTU 38.303-11-26-91

40:60butadiene : α-methylstyrene

in the production of water-resistant cardboard

• dry residue ≥42%• рН 8-10 units• σ ≥40 mN/m• 6 months

sKs-75КTU 9491-44-05766793-96


in the technology of obtaining innersole and cellulosic material

• dry residue ≥43%• рН 11.5-12.5 units• 6 months

Carboxylated latexes

Bs-65nTU 9491-48-05766793-97

35:65:0,7butadiene : styrene : methacrylic

acid

as a binding substance in the paint and varnish industry, in the paper industry for paper coating, in the production of household detergents for obtaining phosphate water-emulsion anti-rust coatings (grade B – as a binding substance in the shipbuilding and construction industry)

• dry residue ≥47%• рН ≤9.5 units• viscosity ≤18 s• film appearance –uniform,

colorless• mechanical stability coagulum • 6 months

sKD-1sGOST 11604

100:1butadiene : methacrylic acid

for cord treatment • dry residue ≥28%• рН ≥9.0 units• σ ≥38 mN/m• Defo stiffness 1500-4000 gf• 6 months

Bs-65К-3TU 38.103657-88

35:65:3butadiene : styrene : methacrylic

acid

for the production of special-purpose anti-rust coatings

• dry residue ≥46%• рН 8.5-9.5 units• σ ≤55 mN/m• viscosity 12-20 s.• Defo stiffness 610-1630 gf• film strength – not defined• 6 months

BmK-65/1TU 38.103330-81

35:65:1butadiene : methyl acrylic ether :

methacrylic acid

for the usage in leather finishing • dry residue ≥37.5%• рН 6-8 units• σ ≤50 mN/m• viscosity 10-15 s.• film strength ≥350 g/mm• 6 months

BsK-70/2TU 38.103541-88

30:70:1butadiene : styrene : methacrylic

acid

for carpet gluing, in the petroleum industry for the preparation of cement and latex slurries and in other branches of industry

• dry residue ≥47.5%• рН ≥9.4 units• σ ≤37 mN/m• viscosity 12-18 s.• 6 months


IBC-container, drums (plastic/steel), tank trucks, RTC, flexi-tanks

12

Application

Butadiene is designed for the production of synthetic rubbers, latexes and chloroprene.

Specifications А B

Premium grade First grade First grade

Mass fraction of 1,3-butadiene; %, minimum 99.3 99.0 98.0

Mass fraction of highly volatiles (hydrocarbons С2, С3), %, maximum 0.10 0.20 0.40

Mass fraction of cyclopentadiene,%, maximum 0.0010 0.0010 not defined

Mass fraction of nitrogen compounds (in terms of nitrogen),%, maximum

including mass fraction of ammonia (in terms of nitrogen),%, maximum

0.003

0.0010

0.003

0.0010

0.020

not determined

Mass fraction of carbonyl compounds,%, maximum 0.005 0.005 0.006

Mass fraction of monosubstituted acetylene hydrocarbons,%, maximum 0.005 0.005 0.020

Mass fraction of allene hydrocarbons,%, maximum 0.03 0.03 not defined

Mass fraction of heavy residue,%, maximum 0.10 0.10 0.30

Mass fraction of methyl ether,%, maximum not defined not defined not defined

Mass fraction of copper,%, maximum not defined not defined 0.00005

Mass fraction of peroxide compounds (in terms of active oxygen), %, maximum 0.0003 0.0010 0.0010

Mass fraction of inhibitor:

• para-tretbutyl-pyrocatechin, %, minimum

• wood tar inhibitor, %, minimum

0.005-0.01

0.010-0.03

0.005-0.01

0.010-0.03

0.005-0.01

0.0010-0.03

Undissolved moisture content absent absent absent

BUTADiEnETechnical Specifications (TU) 38.103658-88 with amendments 1-8; GOST R 55066-2012


Transportation

RTC

13

Application

To increase the octane number in the production of motor petrols. The addition of MTBE to motor fuels increases the fuel combustion temperature and engine operation efficiency, improves engine start-up at low temperatures. Significantly reduces the content of CO, hydrocarbons in exhaust gases of cars.

Specifications

Mass fraction of MTBE, %, minimum 98.0

Mass fraction of alcohols, %, maximum 1.5

Mass fraction of hydrocarbons C4– C8, %, maximum 1.5

Mass fraction of moisture, %, maximum 0.1

Mechanical impurities absent

mEThyL TERT-BUTyL EThER (mTBE)Grade АTechnical Specifications (TU) 38.103704-90


Application

It’s used as a solvent and as a component of motor petrols. It’s not designed for the direct application as a commodity motor petrol.

Specifications

Density at 20оС, kg/m³, within limits 690-718

Knock rating:• octane number, determined by the motor

method, minimum

• octane number, determined by the research method, minimum

79

91

Fraction composition:

Initial boiling point, оС, minimum 28

10% is distilled at temperature, оС, maximum 75



Dry point, оС, maximum 230

Distillation test residue, %, maximum 1.5

Residue and wastes, % , maximum 4.0

Mass fraction of sulfur, %, maximum 0.05

Saturated vapor pressure, kPa (mm Hg), maximum 80 (600)

Acidity, mg КОН per 100 cm³, maximum 2.0

Existent gum, mg per 100 cm³, maximum 5.0

Copper plate test passed

Mechanical impurities and water absent

Induction period, min., minimum 360

PETROL fOR inDUsTRiAL PURPOsEsCompany standard 05766793-008-2013

Transportation

RTC, tank trucks

Transportation

RTC, truck tanks

14

Application

For the production of polypropylene during polymerization over titan-magnesium catalyst.

Specifications

Volume fraction of propylene, %, minimum 99.5

Volume fraction of propane, %. maximum 0.5

Volume fraction of ethane, ppm, maximum 200

Volume fraction of ethylene, ppm, maximum 50

Volume fraction of C4, C5, saturated hydrocarbons, ppm, maximum 200

Volume fraction of acetylene, ppm, maximum 5

Volume fraction of methyl acetylene, ppm, maximum 3

Volume fraction of propadiene, ppm, maximum

5

Volume fraction of butadiene, ppm, maximum 50

Mass concentration of sulfur, mg/m3 maximum 1

Mass fraction of water, ppm, maximum 5

Volume fraction of carbon oxide, ppm, maximum 0.03

Volume fraction of carbon dioxide, ppm, maximum 5

Volume fraction of COS, ppm, maximum 0.02

Volume fraction of arsine, ppm, maximum 0.03

Volume fraction of phosphine, ppm, maximum 0.03

PROPyLEnE POLymERiZATiOn GRADETechnical Specifications (TU) 2411-004-76332549-2016


Application

It’s used for the production of organic products.

Specifications

Volume fraction of propylene, %, minimum 99.8

Volume fraction of ethylene , %, maximum 0.005

Volume fraction of acetylene and methyl acetylene , %, maximum 0.001

Volume fraction of hydrocarbons С4, %, maximum 0.002

Volume fraction of diene hydrocarbons (propadiene and butadiene), %, maximum 0.001

Volume fraction of ethane, propane, %, maximum 0.2

Mass concentration of sulfur, mg/m3, maximum 1.0

Mass fraction of water, %, maximumа) in the product, delivered by pipelineb) in the product, delivered in tanks

and cylinders

0.0005

0.02

Free water content absent

PROPyLEnEChemical grade, premiumGOST 25043-13

Transportation

RTC

Transportation

RTC

15

PROPAnETechnical gradeGOST 20448-90

Application

It’s used as a fuel for public utility consumption and for industrial purposes.

Specifications

Mass fraction of components , %

• amount of methane, ethane, ethylene

• amount of propane and propylene

• amount of butanes and butylenes, minimum

not defined

not defined

60

Volume fraction of liquid residue at 20°С, %, maximum 1.8

Saturated vapor pressure, manometric, MPa, at a temperature of +45°С, maximum 1.6

• Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum

• including hydrogen sulfide, maximum

0.013

0.003

Free water and alkali content absent

Odor intensity, points, minimum 3

BUTAnETechnical gradeGOST 20448-90


Transportation

RTC, truck tanks

Application


Specifications А B

Mass fraction of components, %Amount of hydrocarbons:• C1 and C2, maximum• C3, minimum

including propylene, maximum• C4 and higher, maximum• C5 and higher, maximum

2.096.00.23.0absent

4.090.010.010.01.0

Mass fraction of hydrogen sulfide, %, maximum 0.003 0.003

Free water and alkali content absent absent

PROPAnE fRACTiOnTechnical Specifications (TU) 0272-023-00151638-99

Transportation

RTC, truck tanks

Application


Specifications

Mass fraction of components, %,amount of propane and propylene, minimum 75.0


Saturated vapor pressure, manometric, MPa, at a temperature of:• +45°С, maximum• –20°С, minimum

1.60.16


• including hydrogen sulfide, maximum0.0130.003

Odor intensity, points, minimum 3

16

Application

As a raw material for pyrolysis and for other purposes.

Specifications Highest grade

А B

Mass fraction of components, %

• propane, maximum

• isobutane, maximum

• amount of butylenes and neopentane (2,2-dimethylpropane), maximum

• normal butane, maximum

• amount of hydrocarbons, С5 and higher, maximum

0.3

0.9

1.4

98.6 0.4%

0.5

1.5

2.5

97.5

0.6%

1.0

4.0

6.0

94.0

2.5%

Mass fraction of hydrogen sulfide and mercaptan sulfur, %, maximum

0.005 0.005 0.01

Free water and alkali content absent absent absent

n-BUTAnETechnical Specifications (TU) 38.301-19-57-97


Application


Specifications

Mass fraction of components, %• amount of methane, ethane, ethylene• amount of propane and propylene • amount of butanes and butylenes,

maximum

not defined not defined 60


Saturated vapor pressure, manometric, MPA, at a temperature of +45°С, maximum 1.6


• including hydrogen sulfide, maximum

0.013

0.003

Free water and alkali content absent

PROPAnE-BUTAnE mixTUREGOST 20448-90

Transportation

RTC, truck tanksTransportation

RTC, truck tanks

17

Application

C5 fraction is used as a component of motor petrol and as feedstock for isoprene production, which is a monomer for the synthesis of synthetic rubbers.

Specifications

Content of desired fraction, C5, vol. %, minimum 90

Content of free water and mechanical impurities, wt % absent

Alcali content absent

Density at 20°C, g/cm3, maximum 0.645

С5 fRACTiOnTechnical Specifications (TU) 0272-072-05766793-2016


Application

It’s used as a coagulant for the industrial waste water treatment and chemical for carbonate deposit and gellation phosphate removal.

Specifications

Mass fraction of the basic substance in terms of AlCl3, g/dm3 200-300

Mass fraction of suspended particles, g/dm3, maximum 0.5

Hydrogen ion activity index, pH 0.8-2.0

Mass fraction of organic impurities, g/dm3, maximum 0.5

ALUminiUm hyDROChLORiDETechnical Specifications (TU) 38.302163-94

Application

It’s used for the production of synthetic rubbers and latexes, plastics, as well as in other spheres of the national economy.

Specifications

Mass fraction of alpha-methylstyrene, %, minimum 99.7

Mass fraction of n-propylbenzene and styrene,%, maximum 0.03

Platinum-cobalt color scale (Hazen scale) – the norm is defined by agreement with consumers

Refraction index at 20°С 1.5382-1.5390

Polymer availability – it should pass the testMass fraction of phenol, %, maximum 0.0005

ALPhA-mEThyLsTyREnE (isOPROPEnyLBEnZEnE)Technical Specifications (TU) 38.103679-89

Transportation

RTC, truck tanks

Transportation

RTC, TC, truck tanks, ISO-tanks

Transportation

Truck tanks

18


Application

It’s used for the synthesis of phenol, acetone and alpha-methylstyrene, as well as a high-octane blending component of motor fuels.

Specifications Grade E Grade A Grade B Grade T

Appearance Colorless transparent liquid

Density at 20оС, g/cm3 0.861-0.863 0.861-0.863 0.861-0.863 0.859-0.862

Mass fraction of isopropylbenzene, %, minimum 99.9 99.9 99.7 95.0

Mass fraction of organic impurities: • ethylbenzene • butylbenzenes and higher hydrocarbons• n-propylbenzene• non-aromatic compounds

0.02000.01500.05000.0200

0.050.020.050.003

0.150.100.20not defined

––––

Mass fraction of unsaturated compounds, gram of bromine per 100 grams of the product, maximum 0.030 0.015 0.02 –

Maximum fraction of phenol, %, maximum 0.0010 0.001 0.0015 –

Maximum fraction of chlorine, %, maximum 0.0004 0.0004 0.001 –

Maximum fraction of sulfur, %, maximum 0.0002 0.0002 0.001 0.0006

Benzene content, %, maximum 0.001 not specified not specified 1.0

Cymene content, %, maximum 0.005 not specified not specified –

Alpha-methylstyrene content, %, maximum 0.0050 not specified not specified –

Diisopropylbenzene content, %, maximum 0.001 not specified not specified –

Amount of alkylbenzenes, excluding isopropylbenzene, %, maximum – – – 4.0

CUmEnE (isOPROPyLBEnZEnE)Technical Specifications (TU) 2114-069-05766793-2016

Transportation

RTC, truck tanks, ISO-tanks

19

Application

Butylbenzene fraction is used as a motor petrol component and for processing by shale processing plants.

Specifications

Water content absent

Density, g/cm3, maximum 0.865-0.885

Content of mechanical impurities, %, maximum 0.01

Content of butylbenzenes, %, minimum 65-90

Content of isopropylbenzene, %, maximum 10-35

Fraction composition:а) initial boiling point, оС, minimumб) end-boiling point, оС, minimumв) residue and waste in the amount, %, maximum

1002302

Content of water-soluble acids and alkalis absent


Application

Ethylbenzene fraction is used as a component of motor petrol and solvent during the production of paints and varnishes.

Specifications

Fraction composition:• end boiling point,оС, maximum• volume ratio of residue and losses during

fractional distillation, %, maximum

200

2

Content of mechanical impurities and water absent

Content of water-soluble acids and alkalis absent

Acidity, mg КОН/100 ml, maximum 2

Actual tar content, mg/100 ml of fraction, maximum 6


BUTyLBEnZEnE fRACTiOnTechnical Specifications (TU) 2414-054-05766793-2003

EThyLBEnZEnE fRACTiOnTechnical Specifications (TU) 38.30225-81


Transportation

RTC, truck tanks

Transportation

RTC, truck tanks

20

“Poliom”, LtdJoint-Venture of the Group of Companies “Titan”, SIBUR and “Gazprom neft”

EnTERPRisE PROfiLE

“Poliom”, Ltd was created on May 14, 2005 for the project implementation connected with the construction of the polypropylene production plant. The plant was built according to the technology of Basell company, supplier of process equipment – Tecnimont company. Advanced world-wide products are implemented in the project, that allow to complete waste-free production cycle. About 400 people are employed by the enterprise. Since 2016 the management system has been in effect at “Poliom”, Ltd, that is in conformity with the requirements of the international standards ISO 9001, ISO 14001, OHSAS 18001. Omsk plant makes the top three Russian polypropylene producers. A number of polypropylene grades, produced by the enterprise are laureates of the contest “100 best goods”. The product quality is oriented towards the EU specification and is in full conformity with it. The products of the enterprise are registered in accordance with the requirements of REACH regulations.

Address: 137, Krasnoayarsky tract, the city of Omsk, 644035telephone: +7 (3812) 79-02-07fax: +7 (3812) 66-86-44e-mail: [email protected]

Omsk polypropylene production plant can produce polypropylene and copolymers of propylene with 1-butene and ethylene, of which: 40 grades – homopolymers; 21 grades – block copolymers; 17 grades – statistical copolymers.

Application

Polymer type sphere of application

homopolymer

• cast and extrusion products of technical and general purpose;• packing film for different purposes;• medical and sanitary purpose products;• monofilaments;• spunbond fibers;• pipe and pipe fittings;

block copolymer

• pressure pipe and pipe fittings;• component parts for motor car industry;• blow molding of industrial and general-purpose products;• profiled sheets and thermoforming sheets;

statistical copolymer

• extrusion flat slot and tubular film;• blow molding of industrial and general-purpose products ;• application of coatings;• thin-wall injection molding.

21

PRODUCTS OF THE LLC “POLiOM”

POLyPROPyLEnETechnical Specifications (TU) 20.16.51-001-76332549-20166

Description

Polypropylene is a crystalline thermoplastic polymer without color and odor. In its natural condition it’s a transparent polymer, but it can be easily pigmented to several colors and tints. Flexibility and versatility of the product allow to apply it in any climatic zones. The brand assortment of the plant depends on the market requirements.

Grades

PP h253 ff

For the production of continuous threads and staple fiber

PP h270 ff PP h273 ff PP h373 ff PP h378 ff

For the production of spunbond

PP h030 GP PP h031 ff PP h033 ff PP h040 GP

For the production of tapes and raffia

PP h021 Bf PP h031 Bf

For the production of biaxially oriented polypropylene (BOPP) film

PP h060 Cf PP h065 Cf PP h080 Cf PP h085 Cf

For the production of non-oriented cast polypropylene (CPP) film

PP h003 GP PP h007 GP PP h013 GP PP h020 GP PP h030 GP PP h040 GP PP h080 GP PP h120 GP

PP h180 GP PP h250 GP PP h251 im PP h252 im PP h350 GP PP h351 im PP h352 im PP h451 im

PP h452 im

For the production of items by the die casting method

PP h003 GP PP h007 GP PP h007 Ex PP h013 GP PP h020 GP PP h030 GP PP h040 GP

Extrusion of pipes and sheets

PP h030 GP PP h032 Tf

Speed thermoforming of disposable tableware


Railway wagons, truck trailersProduct packing – 25 kg bags

22

Group of Companies “Titan” ........................................................3

PJSC “Omsky kauchuk” ...................................................................7

SBR / butadiene-methylstyrene rubbers ................................8

Synthetic latexes ..............................................................................10

Butadiene ...........................................................................................12

Methyl tert-butyl ether (MTBE) ...................................................13

Petrol for industrial purposes......................................................13

Propylene ...........................................................................................14

Propylene polymerization grade ...............................................14

Propane ...............................................................................................15

Propane fraction ..............................................................................15

Butane .................................................................................................15

Propane-butane mixture ..............................................................16

N-butane ............................................................................................16

С5 fraction ...........................................................................................17

Aluminium hydrochloride ............................................................17

Alpha-methylstyrene .....................................................................17

Cumene ...............................................................................................18

Ethylbenzene fraction....................................................................19

Butylbenzene fraction ...................................................................19

“Poliom”, Ltd ......................................................................................20

Polypropylene ..................................................................................21

Contents

GROUP OF COMPANIES “TITAN”

PRODUCTs Of ThE PJsC “OmsKy KAUChUK”

sALEs in RUssiAtel.: +7 (3812) 29-95-55e-mail: [email protected]

tel.: +7 (3812) 29-95-55 (ext. 55-50)e-mail: [email protected]

ExPORT sALEstel.: +7 (3812) 92-54-75, 29-95-55е-mail: [email protected]

PRODUCTs Of ThE “POLiOm”, LTD

ExPORT sALEstel.: +7 (3812) 79-02-07е-mail: [email protected]

product catalogue - titan-omsk.ru · the main production site of the company is located on the...

Documents