product catalogue - d&r henderson
TRANSCRIPT
ProductCatalogue
Contact our friendly customer service team or your Sales Representative.
1300 733 266 [email protected] drhenderson.com.au
2 drhenderson.com.audrhenderson.com.au2
31300 733 266
[email protected] our friendly customer service teamor your sales representative.
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
Category Colour Finish Page
Flooring ALL T&G Particle Board 4
timber Sawn, Dressed & Gluts 5
melamine
White All 6
Black All 6
Euro Woodgrain 7
HDF Machine Grade 8
Colour Availability 9
CTS Edged 10
edge taPe & glue All 11
mdF
Raw STD/MR 12
Exterior MR 12
FR MDF FR 12
PartiCle board
Raw STD 13
MR 13
CTS 13
Veneers
Timber Natural 14-15
Recon 16-18
Acrylic Gloss G1S/G2S 19
Acrylic Matt G1S/G2S 20
Soft Touch Super Matt 21-22
Finger Print Proof G1S/G2S 23
Ply
Raw Structural 24
Non-Structural 24
Decorative Hoop 24
Lightweight & Balsa 24
Birch 24
Flooring 24
Fireply 24
Bamboo 25-26
"PVC Foam board (Versaboard)"
White Satin 27
Black Satin 27
Wardrobe
All Mirror 28-29
Vinyl 28-30
Accessories 28-29
distributed ProduCts All 30
reCyCled ProduCts All 31
index
4 drhenderson.com.au
D&R Henderson: Monsbent PlantE1 AS/NZS 1860.1: Licence No: 003
producttype
thickness sheet size sheets per pack m2 per pack max joist span
Orange Tongue Standard19mm 3600 x 600
3600 x 8003600 x 900 36 103.6
116.6 450mm
Orange Tongue H2 Termite Treated 19mm 3600 x 600 3600 x 8003600 x 900 36 103.6
116.6 450mm
Burgandy Tongue Standard22mm 3600 x 800
3600 x 900 32 92.2103.7 600mm
Burgandy Tongue H2 Termite Treated 22mm 3600 x 8003600 x 900 32 92.2
103.7 600mm
Navy Tongue Standard25mm
3600 x 60027
58.3600mm
* Dependent on nature of use and floor loading
Typical Property Values for Class 1 Particleboard Flooringproperties units 19mm 22mm 25mm
DensityKG/m3 680 700 700Bending Strength (MOR) MPa 24
2124Bending Stiffness (MOE) MPa 3500 3250 3750Internal Bond Strength KPa 0.7 0.75 0.824hr Thickness Swell
%3
32Thickness Stability
%11
1111Glue Bond Quality
%12
1212Glue Bond Durability MPa 5.5 5.56Surface Water Absorption g/m2 50
5050
Fire Hazard Indicies (Typical achieved when tested to AS/NZS 1530.3)indicies
result rangeIgnitability12-13 0-20
Spread of Flame6-7 0-10
Heat Evolved7-8 0-10
Smoke Developed2-3 0-10
Floorboard is manufactured to satisfy the requirements of AS/NZS 1860.1For further details on fixing Floorboard refer to AS/NZS 1860.2
D&R Henderson: Monsbent PlantE1 AS/NZS 1860.1: Licence No: 003
product type thickness sheet size sheets per pack m2 per pack max joist span
Orange Tongue Standard 19mm3600 x 6003600 x 8003600 x 900
36 103.6116.6 450mm
Orange Tongue H2 Termite Treated 19mm3600 x 600 3600 x 8003600 x 900
36 103.6116.6 450mm
Burgandy Tongue Standard 22mm 3600 x 8003600 x 900 32 92.2
103.7 600mm
Burgandy Tongue H2 Termite Treated 22mm 3600 x 8003600 x 900 32 92.2
103.7600mm
Navy Tongue Standard 25mm 3600 x 600 27 58.3 600mm
* Dependent on nature of use and floor loading
Typical Property Values for Class 1 Particleboard Flooring
properties units 19mm 22mm 25mm
Density KG/m3 680 700 700
Bending Strength (MOR) MPa 24 21 24
Bending Stiffness (MOE) MPa 3500 3250 3750
Internal Bond Strength KPa 0.7 0.75 0.8
24hr Thickness Swell % 3 3 2
Thickness Stability % 11 11 11
Glue Bond Quality % 12 12 12
Glue Bond Durability MPa 5.5 5.5 6
Surface Water Absorption g/m2 50 50 50
Fire Hazard Indicies (Typical achieved when tested to AS/NZS 1530.3)
indicies result range
Ignitability 12-13 0-20
Spread of Flame 6-7 0-10
Heat Evolved 7-8 0-10
Smoke Developed 2-3 0-10
Floorboard is manufactured to satisfy the requirements of AS/NZS 1860.1
For further details on fixing Floorboard refer to AS/NZS 1860.2
Navy Tongue
Burgundy Tongue
Orange Tongue
Independent | Sustainable | Competitive
Floorboardinstallation guidelines
Flooring
D&R Henderson have been manufacturing all purpose tongue and grooved particleboard flooring since 1987. Floorboard products incorporate a high concentration wax-resin system, allowing for greater edge protection if sheets are cut. This obviates the need for edge wax sealant.
Floorboard meets all the requirements of the Australian standard AS/NZS 1860.1 and is suitable for domestic and commercial installations.
Tongue & Groove Floorboard come in three thicknesses and is available as General Purpose (GP) or Termite Treated (TT).
SIZE THICKNESS TONGUE FINISH
3600 x 800 19mm Orange STD
3600 x 900 19mm Orange STD
3600 x 800 19mm Orange T/T
3600 x 900 19mm Orange T/T
3600 x 800 22mm Burgundy STD
3600 x 900 22mm Burgundy STD
3600 x 900 22mm Burgundy T/T
3600 x 600 25mm Navy STD
drhenderson.com.au8
Request a copy of ourFlooring Installation Guide
or downloadat drhenderson.com.au
51300 733 266
[email protected] our friendly customer service teamor your sales representative.
Sawn TimberPine Framing
&Gluts and Bearers
Australian Plantation Grown Radiata PineD&R Henderson are a major Sawmilling company with an Australia wide presence. Our Sawmill and Board Production facility is located in Northern Victoria, where we harvest Radiata Pine for multiple manufacturing applications.
Waste from our sawmill is then redirected into the Particleboard Manufacturing plant where we look to maintain a sustainable supply from our Forestry through to the end user.
Common industries we supply:Furniture manufacturers
Bedding
Shopfitters
Cabinet Makers
Landscape
Construction
Packaging Solutions for BusinessManufacturing businesses of all types like to present their product in the best form as possible to create repeat sales, and to protect the finished quality of the completed item. Therefore D&R Henderson being a sawmill based business who also is one of Australia’s leading makers of Particle Board and MDF board products, knows the importance of securely packing the goods. Our sawmill that feeds the board business also manufactures its own Gluts or Bearers. Today they are available to you.
Gluts/Bearers available in multiple sizes. Popular sizes include:· 70 x 48 x 1230 mm (Grooved for strapping)· 70 x 48 x 1830 mm (Grooved)· 100 x 75 - 3.6/4.8 & 5.4m (Lengths for heavier industrial applications)
Pack sizes:· 70 x 48 mm - 225 sticks· 100 x 75 mm - 70 sticks
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
6 drhenderson.com.au
D & R Henderson is one the major manufacturers of Raw particle board and Melamine products in Australia.Our manufacturing plant is in Benalla, northern Victoria where we source Australian grown Radiata Pine
to make our products.
Our available range of products is very extensive and too much to list in the catalogue, hence we have listed our major sellers, with variable sizes available to specification, based on large volume requirements.
Melamine
Cherry Latte
Young Birch
Rotary Birch
White Poplar
Espresso Walnut
Frosty Oak
Banstead Oak
Chocolate AppleNew Mahogany
Wenge
Light Pear
Sonova Beech
Vanilla Oak
Charred Oak
Western Walnut
Cherry
Refined Beech
Frosty Oak desk
Request a copy of our Melamine Colour & Design brochure or download at drhenderson.com.au
drhenderson.com.au4
COLOUR SIZE THICKNESS SUSBSTRATE FINISH
WHITE
2400 x 1200 mm 9, 12, 16, 18, 25 & 32 mm
MR PB (MR) &
MR MDF (MRF)E0
(Not all sizes)
Satin/CTX/Décor
2400 x 1800 mm 16 & 18 mm Satin/CTX/Décor
3600 x 1200 mm 16 & 18 mm Satin/CTX/Décor
3600 x 1800 mm 16, 18, 25 & 33 mm Satin/CTX/Décor
BLACK
2400 x 1200 mm 16 & 18 mm CTX/Décor
3600 x 1200 mm 16 & 18 mm CTX/Décor
3600 x 1800 mm 16, 18 & 25 mm CTX/Décor
71300 733 266
[email protected] our friendly customer service teamor your sales representative.
EuroMelamine
Wood Grain FeelEuro MelamineModern wood grain designs provide texture and style in commercial and residential settings.
D&R Henderson produce a range of woodgrain finishes we call EURO. Popular for doors where you want to add an element of class without the high price of 2 pack or gloss.
Board sizes mainly in 2400 x 1200 x 16mm.
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
Treble Elm
DriftwoodBleached Oak
Black Euro
White Euro
Cinnamon
Charred OakMushroom Micraline
Vanilla Oak
Oyster Micraline
Flax Teak
Liquorice MicralineSage Oak
Rift Oak
8 drhenderson.com.au
White Satin HDF - Machine Grade
D&R Henderson QLD are now stocking 3 popular sizes in HDF in 16 & 18mm thick boards.
HDF is a great solution for where routing of doors results in a cleaner finish than traditional MDF. Because it is harder you shouldn’t experience the furriness and increased preparation time by your spray painters when 2 packing.
HDF available sizes
SIZE THICKNESS PACK SIZE
2400 x 1200 mm 16 mm MR EO 30
2400 x 1200 mm 18 mm MR EO 30
3100 x 1200 mm 18 mm MR EO 30
Typical Densities
16 & 1 8 mm E0/MR MDF 720 kg / m3
16 & 1 8 mm E0/MR LPM 760 kg / m3
16 & 1 8 mm E0/MR HDF 800 kg / m3
Ideal for:
Hampton or Shaker Style Finish
Kitchen Doors
Wardrobe Doors
Any 2 Packing application
HDF(High Density Fibreboard)
drhenderson.com.au12
91300 733 266
[email protected] our friendly customer service teamor your sales representative.
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
Melamine Colour Range
Availability Guide
Edgetape available for all colours and designs in the following sizes:29 x 2 mm / 22 x 2 mm / 22 x 1 mm
Plate Finishes: CTX, Euro Linear, Decor and Satin (Default CTX).
MDF & MR-MDF substrate & other sizes available upon request.
E-Zero (E0) and Super E-Zero ( SE0) substrate available upon request.
Kitchen Availability Commercial Availability
Colour Finish 2400x1200mm 2400x1800mm 3600x1800mm
Avalanche Sheen Gloss
Banstead Oak CTX
Black CTX/Décor/Euro
Bleached Oak Euro
Brushed Aluminium CTX
Charred Oak CTX/Euro
Cinnamon CTX/Euro
Driftwood Euro
Flax Teak CTX/Euro
Florentine Grey CTX
Graceland Blue CTX
Liquorice Micraline CTX/Euro
Mushroom Micraline CTX/Euro
Oyster Micraline CTX/Euro
Porcelain CTX
Rift Oak Euro
Sage Oak Euro
Sheer White CTX
Sonova Beech CTX
Treble Elm Euro
True Antique White CTX
Vanilla Oak CTX/Euro
White Euro
Key:
Product available
Product not available
10 drhenderson.com.au
CTS (Cut to Size)Raw CTS products are generally made to sizes requested by customers as componentry to fast track installation of products like shelving, furniture, cupboards, & wardrobes as some examples. Standard sizes are as follows:
Particleboard &
White Melamine
LENGTH WIDTH THICKNESS SUB PATTERN OTHER
1800 0450 16 mm P / B Raw
1800 0600 16 mm MR Raw
1800 0600 16 mm P / B Raw
2400 0450 16 mm P / B Raw
2400 0295 16 mm MR White Edge 1
2400 0445 16 mm MR White Edge 1
2400 0597 16 mm MR White Edge 1
3600 0410 16 mm MR White Edge 1
3600 0420 16 mm MR White Edge 1
3600 0595 16 mm MR White Edge 1
3600 0597 16 mm P / B White Edge 1
2400 0568 16 mm MR White
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 7
111300 733 266
[email protected] our friendly customer service teamor your sales representative.
D & R Henderson carry a wide range of Edge Tapes for various board finishes.
Stock and colours may vary on popularity, please ask as we may have for immediate delivery.
We promote the Edge Band Glue that we use for 1,000’s of lineal metres each month. Why? Because we know it sticks.
Ask your representative for a flyer.
Edge Tape & Glue
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 9
Also ask about our White Edge Tape now,as we are much more competitive thanwe have been in the past.
12 drhenderson.com.au
Raw or Standard MDF (Medium Density Fibreboard)We stock a range of popular sizes in our warehouse for immediate delivery, typically in 2400 x 1200 board sizes for other sizes outside of the norm, we draw from either our mill or external suppliers, dependent upon the urgency. Sheet quantities no problem.
Thicknesses available:6 mm – 32 mm
Ultra HMR MDF – Flooring UnderlayD&R Henderson Flooring Underlay is a High Performance Fibreboard (HPF) manufactured using a newUltra HMR resin (MDI). The increased moisture resistance provides extended protection for the life of the product. It is specifically manufactured for interior use complying with AS/NZS 1859.2 - Reconstituted Wood Based Panels. NAF (No Added Formaldehyde) MDI resin does not contain Formaldehyde of any type. No Formaldehyde is added in the manufacturing process, minimal amounts of natural Formaldehyde are present in all wood products which are far below any emission standards.
MDF
drhenderson.com.au10
Fire Retardant MDF (FR MDF)Application where a Fire Retardant material is specified. Commonly used in nursing homes or government department buildings. FR MDF can be cheaper than Ply if price is a consideration. Please note this is a project order specific product and is not kept in regular stock, though can be sourced quickly.
131300 733 266
[email protected] our friendly customer service teamor your sales representative.
RawboardAs the name suggests, Raw board is sheet particleboard ready for a wide range of applications, including laminating, kitchen benchtops, furniture and lounge manufacturing, warehouse racking, pallets and a broad range of other applications.
Substrates can vary though are commonly standard MR (Moisture Resistant) board, or non resistant (UF).
Sizes can also vary though common sizes are stocked as shown.
Particleboard
LENGTH WIDTH THICKNESS
2400 0600 16 mm
2400 1200 16 mm
2400 1800 16 mm
3600 0600 16 mm
3600 1200 16 mm
2400 1200 18 mm
2400 1800 18 mm
3600 1800 33 mm
drhenderson.com.au6
14 drhenderson.com.au
D&R Henderson are proud to offer an exclusive range of both natural and reconstituted timber veneers, The Legno Range.
Ranging in colour from soft light oak tones to the very dark, rich tones with varying grain structure, our comprehensive Legno range offers you extensive colour options ensuring you achieve your desired beautiful timber finish.
Timber veneer is the finest use of fine timbers, because it is real timber. One cubic metre of log produces around 1000 square metres of veneer! No other form of woodworking material results in such a yield.
Natural Veneers.The natural variation of timber means each project is individual. No two veneers are exactly alike. The ‘Fingerprints ‘of nature lift your designs above that achievable with other similar man made alternatives.
Timber veneers add natural warmth and ambience to your project. Timber veneer is warm and gentle to the touch.
Recon Veneers.Reconstructed veneers are manufactured from readily available plantation timbers, such as poplar, Obeche or Bamboo. Logs are rotary peeled into veneers, which are then dyed all the way through and dried. Layers of variously coloured veneers are then laminated together in moulds in a controlled pattern to form ‘grain’ patterns which are then re-sliced into veneers. The way the layers of veneers are arranged and are then re-sliced depend on the desired pattern – the process is fully automated and often involves the use of computer software to produce different veneer figures and patterns.
Reconstructed timber veneers offer excellent consistency in colour and repeated grain pattern, patterns and colours that can be easily matched or replaced.
Veneers
drhenderson.com.au
About UsD&R Henderson is one of Australia’s largest privately owned manufacturing companies operating in the Laminated Particleboard
and Pine Timber Industry.We have various manufacturing and sales locations across Australia. These locations are
operated by people who share our commitment to strive for and maintain the highest
standard of quality products and services.Our commitment underpins everything that we do, but to achieve this goal ultimately depends
on the efforts of each and every employee at D&R Henderson Pty Ltd. This is why each
and every member of our team is recognised and considered a vital asset to our Company.
Our commitment to employees is demonstrated through our continuously developing
human resources framework, policies, training opportunities and career development.
Mission StatementAs a manufacturer, marketer and distributor of particleboard and wood
panel related products to industries local and international, we are
committed to profitability, innovation and growth within established niche
markets on the basis of our long standing reputation for service, quality,
design and price.
Corporate VisionWe will continue to be a respected viable alternative supplier to the other
larger manufacturers in our industry. Our continued growth will in part be achieved by preserving the culture
of a privately owned Australian manufacturing company, which encompasses
a culture that is compatible with the majority our business partners.
Our HistorySince opening our first warehouse in Sydney in 1964 specialising in plywood
products, the company has progressed to a particleboard manufacturing
and sawmilling organisation with offices and factories in five states across
the continent. During that period we have amassed many years of knowledge and experience in the manufacturing of timber veneers.
D&R Henderson now employs over 230 people and is well established in the very
competitive timber and wood panel industries in Australia. Our basic philosophy
has been to develop a good working relationship with our customers while being
committed to continual improvements in products and services.The company has installed in-house raw material manufacturing processes to ensure
reliability of supply and is therefore largely independent and self-sufficient as a group.
With ongoing research and development, we are committed to continually improving
both our range of products and service which will enable us to remain at the leading edge
of the industry.
Legno Category 1Finishing Dyed & Recon Veneers
D&R Henderson Legno Veneers
Legno Category 1 - Finishing Dyed & Recon Veneers
Faded Oliv
Brazilian Teak
Chocolate Elm
Greystone
Dominance
Snowstorm
Amazon Blackwood
Sunflower Maple Qtr
Asteroid Dust
Themis
Sunburnt Orange
Sunflower Maple
Nagris
Oliv Whitewash
Black Sassafrass
Smokey Chestnut
Bamboo
Stonvehaven
Fury
Tahitian SandLegnoreconstituted timber veneer
Legnoreconstituted timber veneer
colour & design guide
Request a copy of our Legno Range brochure and Legno colour & design guide or download at drhenderson.com.au
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 13
151300 733 266
[email protected] our friendly customer service teamor your sales representative.
VeneersNatural
SPECIES CUT
Anegre Crn/Qtr
Am Cherry Crn
Am Oak Crn
Am Oak Qtr
Am Walnut Crn
Beech Crn
Blackbutt Crn/Qtr
Blackwood Crn
Brushbox Qtr
Clear Pine Crn
Hoop Pine Rotary
Ironbark Crn/qtr
SPECIES CUT
Jarrah Crn
NG Rosewood Crn
Plant Oak Qtr
Plant Oak Natural
Red Gum Qtr
Spotted Gum Qtr/Crn
Tas Ash Qtr
Tas Oak Qtr
Tas Oak Natural
Rock Maple Crn
Blackbutt NFG
Edge Tape: Available to match & upon request
Sizes commonly for the QLD market are a 16mm Particle Board or MDF substrate.
G1S & G2S available.
drhenderson.com.au14
16 drhenderson.com.au
VeneersRecon Legno
Cat 1
Ask your sales representative to view sample swatches.
Faded Oliv
Brazilian Teak
Chocolate Elm
Greystone
Dominance
Snowstorm
Amazon Blackwood
Sunflower Maple Qtr
Asteroid Dust
Themis
Sunburnt Orange
Sunflower Maple
Nagris
Oliv Whitewash
Black Sassafrass
Smokey Chestnut Bamboo
Stonvehaven
Fury
Tahitian Sand
White Poplar
Pale Elm
Honey Sassafrass
Smokey Elm
Bianca
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 15
171300 733 266
[email protected] our friendly customer service teamor your sales representative.
Toffee Sassafrass
Honeycomb
Mocha Linear
Scandinavian Teak
Scandinavian Oak
Macchiato
Asteroid
Thunder Struck
Golden Equidea
Sunflower Oak
Linear Blackbean
Lavazza
Lavazza Pinstripe
Linear Eucalypt
Earl Grey
Linear Oak
Ridgeback Black BeanIridescent
Linear Walnut
Burnt Eucalpyt Sunflower Teak
VeneersRecon Legno
Cat 1
Ask your sales representative to view sample swatches.
Glisten Melificent
Burnt OakRidgeback Eucalypt
drhenderson.com.au16
18 drhenderson.com.au
VeneersRecon Legno
Cat 2
Keeping up appearances. Just like other dyed products, such as fabric, it is possible that D&R Henderson Legno Recon Veneers may vary slightly in colour by 5-10% from batch to batch.
To ensure the best results, all veneers for a projects should be ordered at the same time and use the same coating and processing systems.
UV resistanceD&R Henderson Recon Veneers are manufactured using superior dyes however just as natural timber veneer will tend to change colour in the presence of light, D&R Henderson Legno Veneers may also be affected. This is part of a natural process and not a defect in the veneer chosen. Where veneer is exposed to strong light sources and sunlight, particularly in a project with north facing windows, it may be advisable to install blinds or have UV protective film applied.
Where D&R Henderson Legno Veneers are specified, it is imperative that a non-yellowing acrylic urethane such as B.C. Coatings UT160 UVMax or polyurethane such as Mirotane Sunshield Clear PU5577 are used to help minimise colour changes over time.
Ask your sales representative to view sample swatches or discuss sizes & availability.
Linen
Ebony
Lyon Oak
Créme Fraiche
Luca Caro
Enigma Desert Sand Rigaletto
Tuscan Chestnut
Ajaccio Walnut Cocoa Bean
Grey Ash Smokey Ash
Edge Tape: Available to match & upon request
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 17
191300 733 266
[email protected] our friendly customer service teamor your sales representative.
Acrylic Gloss Laminate
Lustre Acrylic Gloss Available in 2400 x 1200 x 18 mm finish. Loose 1mm Acrylic sheets available upon request. Sheet quantities OK, though mainly White, Alabaster & Black stocked. Other colours allow 7 days production minimum.
Matching Gloss Edge Tape to suit.
FeaturesHigh thermal stabilityOutstanding weather resistanceUltra high gloss appearanceEasy to cleanEasy to fabricate
Ideal UsesPatios and alfresco areasMarine joineryCaravans and RV joineryKitchen cabinets and doorsOffice furniture and partitionsWardrobes
SlateRed
MochaBlack
Alabaster Arctic White
Champagne Metallic Graphite Metallic
ManufactureLustre acrylic panels are laminated using state of the art PUR hot melt bonding system which delivers unsur-
passed adhesion and a premium high gloss finish that is resistant to both heat and moisture.Australian MadeLustre Acrylic Panels are an Australian manufactured premium high gloss acrylic finished board. Cost Effective
This sleek and modern Lustre product is a simple, easy and cost effective option to those of laminate, 2 pac or
vinyl - making it the preferred choice for kitchens, offices, wardrobes and all types of furniture for both interi-
or and exterior.
CareLustre Acrylic Panels come with a protective film, be sure not to remove this film until work has been
completed as this will initiate a 72 hour curing process.Clean using a non-abrasive soap or detergent in warm water with a soft cloth or chamois. Be sure to wipe any
spills or residue immediately, as the panels are not waterproof, they are moisture resistant.
Minor scratches can be easily removed by hand with selected liquid polishes and a soft polishing cloth. Never
use cleaning products containing alcohol, solvents, abrasives, acetone, paraffin, petrol, pinewood or oils or
glass cleaners as this will only damage the surface.Following these caring steps will ensure your surface stays beautiful for years to come.
Ultra high gloss acrylic laminateModern Functional Clean
Features – High thermal stability – Outstanding weather resistance – Ultra high gloss appearance – Easy to clean
– Easy to fabricate
Ideal Uses – Patios and alfresco areas – Marine joinery
– Caravans and RV joinery – Kitchen cabinets and doors – Officefurniture and partitions – Wardrobes
Ultra high gloss acrylic laminate
Request a copy of our Lustre brochure or download at drhenderson.com.au
drhenderson.com.au18
20 drhenderson.com.au
Acrylic Matt Laminate
Lustre Acrylic Matt On trend and delivers a non reflective finish where Gloss is not ideal. Providing a superior appearance
for flat lamination and post forming.
Available ColoursWhiteAlabasterBlack
Size 2440 x 1220mm
Loose Acrylic 1mm
Matching Edge Tape
Ideal UsesWall cladding
Occasional furniture & cabinets
Kitchen cabinets and doors
Office furniture and partitions
Wardrobes
Black
Alabaster White
Request a sample fan
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 19
211300 733 266
[email protected] our friendly customer service teamor your sales representative.
Soft Touch Super Matte
Board
Soft Touch Super Matt Is a great solution as an Anti Reflective finish which cuts and edges really well, with great stain resistance.
Our product is manufactured with a highly durable PVC foil coating to withstand what life will throw at it. Soft Touch Super Matt’s finish is on trend at the moment, with many starting to move away from gloss. Looking for elegance without breaking the budget?
Available in 2800 x 1200 x 18 mm MDF
—G2S Finish.
drhenderson.com.au20
CreamBlack
New Grey Stone Grey
Dark Grey
VisionStorm Grey
Night Blue
Light CreamLight GreyPebble Grey White
Multiple usesBathrooms
Kitchens
Hospitality
Shop Fit Cabinetry
Office Fit Outs
Ideal UsesWall cladding
Occasional furniture & cabinets
Kitchen cabinets and doors
Office furniture and partitions
Wardrobes
Edge Tape: Available to match & upon request
22 drhenderson.com.au
Soft Touch Super Matte
Board
Soft Touch Properties. Panels are made up of a premium quality MDF (Medium Density Fiberboard) panel substrate that has been laminated, with a 0.30 mm decorative polymer film overlay or RTF (Rigid Thermoformable foil) using PUR adhesive (reactive polyurethane) that provides the highest structural bonding strength.
BenefitsA decorative polymer film overlay that is impact resistant to chipping, cracking or breaking compared to similar panel solutions.
A less expensive alternative to painted material Easy maintain and clean.
BRILLIANCE ( 600) < 5 GLE
Optical Distortion Effect None
Orange Peel Effect None
Scratch resistance Good
Stain Resistance Great
Water Vapour Resistance Great
Sun Light Resistance Great
Core MDF
Thickness 18 mm
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected]
21
231300 733 266
[email protected] our friendly customer service teamor your sales representative.
Finger Print Proof Laminate
Not all Finger Proof Laminates are alike. Buyer beware.
Cleantouch A premium laminate where unsightly finger prints are all but gone. Suited for both horizontal & vertical applications.
BenefitsAnti-fingerprint
Thermal Self-Healing
Anti-Static
Mould Resistant
Water Repellent
ColoursWhite
Beige
Light Grey
Dove Grey
Graphite
Black
Sizes3050 x 1230 mm x 18 mm
ApplicationsHospital Grade
Kitchen Doors
High tra�c areas
3660 x 1230 mm x 18 mm
Matching Edge Tapes available alsoLaminate ONLY available
Request a sample fan
drhenderson.com.au22
24 drhenderson.com.au
Plywood
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 23
Form Ply CD 1800/2400 x 1200 – AS2269 EWPAA.Film Face
Structural Form
(F17 &F22)
Structural F8 & F11 Pine Plywood CD 2400 x 1200 – AS2269 EWPAA.7 mm, 9 mm, 12 mm, 15 mm, 17 mm, 19 mm, 21 mm & 25 mm
CD Structural as the name suggests is ideal for building applications and is less important on its aesthetic appearance. Knots may be present as well as some putty filled holes or cracks.
Non-Structural Pine Plywood CD 2400 x 1200 (Renewable) “A” Bond.6.5 mm, 9 mm, 12 mm, 15 mm, 17 mm, 19 mm, 21 mm & 25 mm
Typically Radiata Pine though Hoop Pine available for a clearer finish for more decorative and visual applications. Price may vary slightly.
Pack sizes may differ slightly dependent upon manufacturer.
2269 T&G.
Structural Flooring T&G CD– AS/NZS F8, F11, F14, F17
2400/2700 x 1200
Sheet Sizes
251300 733 266
[email protected] our friendly customer service teamor your sales representative.
Ply Bamboo
D&R Henderson proudly distributing for Leto Bamboo.Leto Bamboo are the major importer of Bamboo Ply in Australia.
Bamboo is an amazing material, being a grass not a wood as some may believe. It is highly durable, eco friendly, hard wearing and fast growing.
Being a renewable resource, dedicated Bamboo plantations can mature in as little as 3 years before they harvest for Ply. Unlike traditional softwoods which can be as much as 30 years to reach maturity.
If you are looking for a point of difference in a Decorative Application with a premium product, search no longer as Bamboo Ply could be the answer.
D&R Henderson are proud to partner with Leto Bamboo across Australia as a Distributor.
Please ask your Rep for samples and be impressed.
Narrow GrainCarbonised
Strand WovenCarbonised
Wide GrainCarbonised
Strand Woven Multi
Narrow GrainNatural
Strand WovenNatural
Wide GrainNatural
drhenderson.com.au24
26 drhenderson.com.au
Ply BambooTypes
& Application
Bamboo Textures
Narrow Grain in natural colour (like Spruce)
Narrow Grain in carbonised (milk coffee colour)
Wide Grain in natural colour
Wide Grain in carbonised
Strand Woven in natural
Strand Woven in carbonised
Strand Woven in multi-colour (blend of natural and carbonised)
Inspiration for Bamboo Application
CNC cutting & routing
Cabinet Doors
Wall & ceiling linings
Point of Sale Displays
Counter and table tops
Furniture etc
Please ask your Rep to view a sample binder.
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 25
271300 733 266
[email protected] our friendly customer service teamor your sales representative.
Versaboard
PVC Foam Board
A lightweight PVC Polymer Board that is a durable solution with water proof, acoustic and insulating properties for many applications where tradtional cabintery won’t suffice.
Available in White / Black & Bamboo Composite
2400 x 1200 x 12, 16 & 18 mm
Multiple applications and usesCan be painted Materials & Fabric applied
Laminated over Can be tiled over
Screwed & drilled Cabinet construction
Weather, mould and mildew resistant
And many more...
Suitable for the Sign writers, Cabinetry and Joinery Trades
Please note: Care must still be taken, and it is highly recommended that you view the product data sheet to ensure suitability.
Other Applications
Alfresco Area
Caravans
Kitchens
Laundries
Office fit outs
Shop fit outs
Public toilets
Wet areas
Ask your Rep for a sample today and explore the possibilities.
drhenderson.com.au26
28 drhenderson.com.au
Wardrobe Doors
D&R Henderson offer wardrobe doors (selected states).
Cabinetmakers & Shop Fitters are increasingly expanding their services to domestic builders and to commercial fit outs. For example many not only make the kitchens, though are now doing the laundries and bedroom robes.
In many cases D&R Henderson are supplying the board materials that make up the cabinetry or shelving. So it is logical that we support our customers with an additional and convenient service in common wardrobe or office sliding doors.
Doors come as a kit ready for installation, including doors and tracks.
You can even mix it up e.g. one door mirror the other vinyl.
To learn more about this service please contact your D&R Henderson representative.
Doors are manufactured to exacting specifications, therefore we suggest you ask your representative to supply our Measurements Guide & Installation Guide.
Door FinishesMirror
Vinyl
Gyprock (for painting)
Frameless Glass
Glass (painted black)
Frames (powder coated aluminium)
White Glacier
Black
Chrome
Matt Alum
AccessoriesTracks & whieel kits can be sold separately
Contact our friendly customer service team 1300 733 266 or your sales representative. [email protected] 27
291300 733 266
[email protected] our friendly customer service teamor your sales representative.
Wardrobe Doors
Budget solutions and ready made to your exact measurements.
Available in standard heights 2100mm x 2400mm
Widths vary and is subject to exact measurements provided by you.
With all doores it is critical to get the space measured in multiple locations as typically most walls are not exactly square.
See our “How to measure doors” guide to get the right fit.
Things to considerChoose from up to 4 common colour frames for framed doors.
White, Chrome, Black & Matt Alum.
Select the number of tracks for wider openings. A triple track may be better so doors don’t stack up and decrease acces into robe.
Gyprock DoorsAffordable and you add the colour.
Vinyl DoorsPopular colours available and easy to clean finish ask our representative for a colour sample.
Mirror Frame FinishOne of our most popular options with your choice of metal frame colour.
White / CreamFramed or Frameless
Coloured back
Our most prestige offer.
Frameless Mirror FinishThis door starts to excude elegance with a solid mirror finish for the sophisticated look.
drhenderson.com.au28
30 drhenderson.com.au
DistributedProducts
Digital Print
White Vinyl Wrap Shaker (Hampton Style) Doors
Door Skins
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
311300 733 266
[email protected] our friendly customer service teamor your sales representative.
Go Greenwith
Recycled
D&R Henderson a Leading Sawmill and Board ManufacturerWhen it comes to sustainability, through our sawmill in Benalla country Victoria, we recycle over 20,000 Tons per annum of recycled wood. That’s over 800 full semi loads of wood product that doesn’t go back into landfill.
A 27m high cleaning tower, removes foreign objects to enable us to provide a superior recycled product for a 2nd chance at life.
Acceptable Wood Types· Soft & Hardwood· Particleboard & plywood offcuts (max.10%)· Raw wood or board· Wood must be clear, dry and free of contaminates· Dry tree trunk, free of bark
Melamine & Raw Particle Board - Supporting the Furniture Industry with Quality Recycled BoardWhilst White Melamine is popular as a 2 sided prefinished board and economical, we can also offer a range of colours to meet your clients spec.
Our CommitmentFor many years we have held a deep commitment to maintaining manufacturing processes which are both efficient and environmentally friendly.
There is virtually zero waste in our manufacturing processes, from sawmilling pine timber through to board manufacture and melamine laminating.
Renewable Resource Mantra10-20% of the wood used in our production is sourced from post consumer material, a resource which has been diverted from the general waste stream to our recycling facility. Once processed into smaller chips, the material undergoes several cleaning stages across multiple sites to remove impurities before being used in a variety of board products.
Over 70% of our wood is sourced from FSC certified plantations, a practice which supports the sustainable management of plantation pine.
Around 75% of the feedstock for our board products is classed as pre-consumer recycled content. This is a by-product from other manufacturing processes which is diverted into systems for further up-stream product manufacture.
1300 733 [email protected]
Contact our friendly customer service teamor your sales representative.
Contact our friendly customer service team or your Sales Representative.
1300 733 266 [email protected] drhenderson.com.au