product catalogue - brass fit product...catalogue product brands the information contained herein is...
TRANSCRIPT
PRODUCT CATALOGUE
PRODUCT BRANDS
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
GAS TIGHT-GCA – AGA Approved Ball Valves
TAC – Push to Connect Airbrake Fittings D.O.T
API – Nickel Plated Pneumatic Push In Air Fittingsand Silencers
FAIRVIEW – NTA Airbrake Fittings D.O.T, NPT Pipe Fittings, Rubber Airbrake Hose Ends D.O.T, Road Ranger Fittings, Rubber Airbrake Hose J1402, Steel Bundy Tubing, Copper Tubing, Stainless Steel Pipe Retaining Clips
ARO – Air Fittings, Couplers & Adaptors
BREEZE – Stainless Steel Hose Clips & Clamps
FLOMAX – Ball Valves, Lever Handle Ball Valves, Tee Handle Ball Valves, Miniature Ball Valves & Gate Valves
ESDAN PLASTICS – Nylon Airbrake Tubing, Nylon 12 Tubing, Suzi Coils & PVC Hoses, Spiral Tie
POWAFLEX – Rubber & PVC Hoses
ARO
CDC – Pneumatic One-Touch Push In Air Fittings, Check Valves and Banjo Flow Controllers
BONDLOC – Adhesives & Sealants
CONECTA – Industrial Brass Fittings, Flare Fittings, Compression Fittings, Pipe Fittings, Airline Fittings, Needle Valves & Drain Cocks
FLUIDFIT – Fittings for Potable Water,Drink Dispensers and Beverages
CONTENTS
INDUSTRIAL BRASS FITTINGSAirline Fittings .......................................................................... 2
Pipe Fittings ............................................................................. 4
Compression Fittings .............................................................. 7
Flare Fittings .......................................................................... 10
AIRBRAKE & NPT PIPE FITTINGSNTA Airbrake Fittings D.O.T Approved ................................ 13
Push to Connect Airbrake Fittings D.O.T Approved .......... 16
Pipe Fittings NPT & Metric ................................................... 19
Road Ranger Fittings ............................................................ 20
Re-Usable Rubber Airbrake Hose Ends D.O.T Approved .. 20
PNEUMATIC FITTINGSPneumatic Fittings Imperial & Metric .................................. 22
FLUIDFIT FITTINGSFluidFit Fittings Imperial & Metric ........................................ 27
ARO FITTINGSARO Couplers ........................................................................ 31
A210 ARO Coupler Adaptors ................................................ 31
A380 ARO Coupler Adaptors ................................................ 31
A400 ARO Coupler Adaptors ................................................ 31
TAPS & VALVESLever Handle Ball Valves ....................................................... 32
Tee Handle Ball Valves .......................................................... 33
Miniature Ball Valves ............................................................. 34
Gates Valves ........................................................................... 34
Needle Valves ......................................................................... 34
Drain Cocks ........................................................................... 34
Check Valves .......................................................................... 35
Gas Approved Ball Valves ..................................................... 35
Brass Lever Taps ................................................................... 35
HOSE CLIPS & CLAMPSBreeze Miniature Hose Clamps ............................................ 37
Breeze Power Seal Hose Clamps ........................................ 37
Oetiker Clips .......................................................................... 37
Pipe Retaining Clips – Stainless Steel ................................. 37
TUBING & HOSECopper Tubing ....................................................................... 39
Bundy Tubing ......................................................................... 39
Nylon Airbrake Tubing ........................................................... 39
Spiral Tie................................................................................. 39
Rubber Airbrake Hose J1402................................................ 40
Rubber Fuel Hose .................................................................. 40
Heater Hose ........................................................................... 40
PVC Airline Hose.................................................................... 40
Easy Clean & Slide Washdown Hose ................................... 41
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
ERGONOMIC WASHDOWN GUNRB65 Ergonomic Washdown Gun ........................................ 43
AIRBRAKING ACCESSORIES
Suzi Coils ................................................................................ 45
Fifth Wheel Slider Kits ........................................................... 45
BONDLOC RANGEAnaerobic Range ................................................................... 47
Cyanoacrylate Range ............................................................ 48
Sealant Range ........................................................................ 58
Structural Range ................................................................... 59
Maintenance Product ............................................................ 59
MISCELLANEOUSMiscellaneous ........................................................................ 51
CONVERSION TABLES & PROFILESConversions ........................................................................... 52
Profiles ................................................................................... 53
CONTENTS
INDUSTRIAL BRASS FITTINGSAirline Fittings .......................................................................... 2
Pipe Fittings ............................................................................. 4
Compression Fittings .............................................................. 7
Flare Fittings .......................................................................... 10
AIRBRAKE & NPT PIPE FITTINGSNTA Airbrake Fittings D.O.T Approved ................................ 13
Push to Connect Airbrake Fittings D.O.T Approved .......... 16
Pipe Fittings NPT & Metric ................................................... 19
Road Ranger Fittings ............................................................ 20
Re-Usable Rubber Airbrake Hose Ends D.O.T Approved .. 20
PNEUMATIC FITTINGSPneumatic Fittings Imperial & Metric .................................. 22
FLUIDFIT FITTINGSFluidFit Fittings Imperial & Metric ........................................ 27
ARO FITTINGSARO Couplers ........................................................................ 31
A210 ARO Coupler Adaptors ................................................ 31
A380 ARO Coupler Adaptors ................................................ 31
A400 ARO Coupler Adaptors ................................................ 31
TAPS & VALVESLever Handle Ball Valves ....................................................... 32
Tee Handle Ball Valves .......................................................... 33
Miniature Ball Valves ............................................................. 34
Gates Valves ........................................................................... 34
Needle Valves ......................................................................... 34
Drain Cocks ........................................................................... 34
Check Valves .......................................................................... 35
Gas Approved Ball Valves ..................................................... 35
Brass Lever Taps ................................................................... 35
HOSE CLIPS & CLAMPSBreeze Miniature Hose Clamps ............................................ 37
Breeze Power Seal Hose Clamps ........................................ 37
Oetiker Clips .......................................................................... 37
Pipe Retaining Clips – Stainless Steel ................................. 37
TUBING & HOSECopper Tubing ....................................................................... 39
Bundy Tubing ......................................................................... 39
Nylon Airbrake Tubing ........................................................... 39
Spiral Tie................................................................................. 39
Rubber Airbrake Hose J1402................................................ 40
Rubber Fuel Hose .................................................................. 40
Heater Hose ........................................................................... 40
PVC Airline Hose.................................................................... 40
Easy Clean & Slide Washdown Hose ................................... 41
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
ERGONOMIC WASHDOWN GUNRB65 Ergonomic Washdown Gun ........................................ 43
AIRBRAKING ACCESSORIES
Suzi Coils ................................................................................ 45
Fifth Wheel Slider Kits ........................................................... 45
BONDLOC RANGEAnaerobic Range ................................................................... 47
Cyanoacrylate Range ............................................................ 48
Sealant Range ........................................................................ 58
Structural Range ................................................................... 59
Maintenance Product ............................................................ 59
MISCELLANEOUSMiscellaneous ........................................................................ 51
CONVERSION TABLES & PROFILESConversions ........................................................................... 52
Profiles ................................................................................... 53
CONTENTS
INDUSTRIAL BRASS FITTINGSAirline Fittings .......................................................................... 2
Pipe Fittings ............................................................................. 4
Compression Fittings .............................................................. 7
Flare Fittings .......................................................................... 10
AIRBRAKE & NPT PIPE FITTINGSNTA Airbrake Fittings D.O.T Approved ................................ 13
Push to Connect Airbrake Fittings D.O.T Approved .......... 16
Pipe Fittings NPT & Metric ................................................... 19
Road Ranger Fittings ............................................................ 20
Re-Usable Rubber Airbrake Hose Ends D.O.T Approved .. 20
PNEUMATIC FITTINGSPneumatic Fittings Imperial & Metric .................................. 22
FLUIDFIT FITTINGSFluidFit Fittings Imperial & Metric ........................................ 27
ARO FITTINGSARO Couplers ........................................................................ 31
A210 ARO Coupler Adaptors ................................................ 31
A380 ARO Coupler Adaptors ................................................ 31
A400 ARO Coupler Adaptors ................................................ 31
TAPS & VALVESLever Handle Ball Valves ....................................................... 32
Tee Handle Ball Valves .......................................................... 33
Miniature Ball Valves ............................................................. 34
Gates Valves ........................................................................... 34
Needle Valves ......................................................................... 34
Drain Cocks ........................................................................... 34
Check Valves .......................................................................... 35
Gas Approved Ball Valves ..................................................... 35
Brass Lever Taps ................................................................... 35
HOSE CLIPS & CLAMPSBreeze Miniature Hose Clamps ............................................ 37
Breeze Power Seal Hose Clamps ........................................ 37
Oetiker Clips .......................................................................... 37
Pipe Retaining Clips – Stainless Steel ................................. 37
TUBING & HOSECopper Tubing ....................................................................... 39
Bundy Tubing ......................................................................... 39
Nylon Airbrake Tubing ........................................................... 39
Spiral Tie................................................................................. 39
Rubber Airbrake Hose J1402................................................ 40
Rubber Fuel Hose .................................................................. 40
Heater Hose ........................................................................... 40
PVC Airline Hose.................................................................... 40
Easy Clean & Slide Washdown Hose ................................... 41
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
ERGONOMIC WASHDOWN GUNRB65 Ergonomic Washdown Gun ........................................ 43
AIRBRAKING ACCESSORIES
Suzi Coils ................................................................................ 45
Fifth Wheel Slider Kits ........................................................... 45
BONDLOC RANGEAnaerobic Range ................................................................... 47
Cyanoacrylate Range ............................................................ 48
Sealant Range ........................................................................ 58
Structural Range ................................................................... 59
Maintenance Product ............................................................ 59
MISCELLANEOUSMiscellaneous ........................................................................ 51
CONVERSION TABLES & PROFILESConversions ........................................................................... 52
Profiles ................................................................................... 53
Threadseal Tape .................................................................... 50
Nylon Tube Cutter ................................................................. 50
Air Duster Gun ...................................................................... 50
25 Drawer Cabinet ................................................................. 50
Cable Ties .............................................................................. 50
Spiral Tie ................................................................................ 40
Copper Tubing ...................................................................... 40
Bundy Tubing ........................................................................ 40
Rubber Airbrake Hose J1402 ............................................... 40
Nylon Airbrake Tubing .......................................................... 40
Rubber Fuel Hose ................................................................. 41
Heater Hose .......................................................................... 41
PVC Airline Hose ................................................................... 41
Polyethylene Tubing .............................................................. 41
Suzi Coils ............................................................................... 42
14
16
19
20
20
51
52
46
47
47
47
48
32
32
32
32
34
34
35
35
35
35
36
36
36
38
38
38
38
22
44
28
CONTENTS
INDUSTRIAL BRASS FITTINGSAirline Fittings .......................................................................... 2
Pipe Fittings ............................................................................. 4
Compression Fittings .............................................................. 7
Flare Fittings .......................................................................... 10
AIRBRAKE & NPT PIPE FITTINGSNTA Airbrake Fittings D.O.T Approved ................................ 13
Push to Connect Airbrake Fittings D.O.T Approved .......... 16
Pipe Fittings NPT & Metric ................................................... 19
Road Ranger Fittings ............................................................ 20
Re-Usable Rubber Airbrake Hose Ends D.O.T Approved .. 20
PNEUMATIC FITTINGSPneumatic Fittings Imperial & Metric .................................. 22
FLUIDFIT FITTINGSFluidFit Fittings Imperial & Metric ........................................ 27
ARO FITTINGSARO Couplers ........................................................................ 31
A210 ARO Coupler Adaptors ................................................ 31
A380 ARO Coupler Adaptors ................................................ 31
A400 ARO Coupler Adaptors ................................................ 31
TAPS & VALVESLever Handle Ball Valves ....................................................... 32
Tee Handle Ball Valves .......................................................... 33
Miniature Ball Valves ............................................................. 34
Gates Valves ........................................................................... 34
Needle Valves ......................................................................... 34
Drain Cocks ........................................................................... 34
Check Valves .......................................................................... 35
Gas Approved Ball Valves ..................................................... 35
Brass Lever Taps ................................................................... 35
HOSE CLIPS & CLAMPSBreeze Miniature Hose Clamps ............................................ 37
Breeze Power Seal Hose Clamps ........................................ 37
Oetiker Clips .......................................................................... 37
Pipe Retaining Clips – Stainless Steel ................................. 37
TUBING & HOSECopper Tubing ....................................................................... 39
Bundy Tubing ......................................................................... 39
Nylon Airbrake Tubing ........................................................... 39
Spiral Tie................................................................................. 39
Rubber Airbrake Hose J1402................................................ 40
Rubber Fuel Hose .................................................................. 40
Heater Hose ........................................................................... 40
PVC Airline Hose.................................................................... 40
Easy Clean & Slide Washdown Hose ................................... 41
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
ERGONOMIC WASHDOWN GUNRB65 Ergonomic Washdown Gun ........................................ 43
AIRBRAKING ACCESSORIES
Suzi Coils ................................................................................ 45
Fifth Wheel Slider Kits ........................................................... 45
BONDLOC RANGEAnaerobic Range ................................................................... 47
Cyanoacrylate Range ............................................................ 48
Sealant Range ........................................................................ 58
Structural Range ................................................................... 59
Maintenance Product ............................................................ 59
MISCELLANEOUSMiscellaneous ........................................................................ 51
CONVERSION TABLES & PROFILESConversions ........................................................................... 52
Profiles ................................................................................... 53
INDUSTRIAL BRASS FITTINGS
2
AIRLINE FITTINGS are manufactured using a special beaded barb design
to provide an unparalleled security against the hose pulling off the barb.
These fittings are available in sizes ranging from 3/16 to 1”.
ADVANTAGES Almost impossible to pull hose off. The 6 degree barb give exceptional sealing
properties, while the end bead provides a shoulder preventing any longitudinal
movement of the hose. For added integrity two hose clips may be used.
APPLICATIONS Use with all rubber, plastic and other flexible hoses. Generally used where
lower pressures (750kpa) are encountered, although with correct selection of hose and clamp,
higher pressures can be accommodated.
WORKING PRESSURES Airline Fittings should be used where lower pressures exist (1000 kPa
(145PSI maximum).
ASSEMBLY
1. Slide clamp onto hose.
2. Push hose fully onto barb.
3. Position the clamp in the centre of the barb and tighten.
AIRLINE FITTINGS
are manufactured using a special beaded barb design
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
3
MALE ELBOW
Part No2020302 2020402 2020404 2020502 2020504 2020602 2020604 2020606 2020804 2020806 2020808 2021006 2021008 2021208 2021212
AIRLINE FITTINGS
SWIVEL CONNECTOR
Part No 2010404 2010406 2010504 2010506 2010508 2010604 2010606 2010806 2010808
Tube Size1/41/45/165/16 5/163/83/81/21/2
Pipe Thread1/4 BSPF3/8 BSPF1/4 BSPF3/8 BSPF1/2 BSPF1/4 BSPF3/8 BSPF3/8 BSPF1/2 BSPF
MALE BRANCH TEE
Part No 2060402 2060404 2060504 2060604 2060606 2060806 2060808
Tube Size1/41/45/163/83/81/21/2
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
Tube Size3/161/41/45/16 5/163/83/83/81/21/21/25/85/83/43/4
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT1/2 BSPT3/4 BSPT
FEMALE HOSE TAIL
Part No20703022070402207040420704062070502207050420705062070602207060420706062070608207080420708062070808207100620710082071212
MALE HOSE TAIL
Part No209030220903042090402209040420904062090502209050420905062090508209060220906042090606209060820906122090802209080420908062090808209081220910042091006209100820910122091206209120820912122091216209160820916122091616
UNION TEE
Part No20303203042030520306203082031020312
UNION JOINER
Part No2050320504205052050620508205102051220516
UNION ELBOW
Part No20404204052040620408
Tube Size3/161/41/41/45/165/165/163/83/83/83/81/21/21/25/85/83/4
Tube Size3/163/161/41/41/45/165/165/165/163/83/83/83/83/81/21/21/21/21/25/85/85/85/83/43/43/43/41”1”1”
Tube Size3/161/45/16 3/81/25/83/4
Tube Size3/161/45/16 3/81/25/83/41”
Tube Size1/45/163/8 1/2
Pipe Thread1/8 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP1/4 BSPP3/8 BSPP1/2 BSPP3/8 BSPP1/2 BSPP3/4 BSPP
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1” BSPT1/2 BSPT3/4 BSPT1” BSPT
Pipe Thread-------
Pipe Thread--------
Pipe Thread----
1/2 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1/8 BSPT
3/8 BSPT1/2 BSPT3/4 BSPT
Pipe Thread
4
PIPE FITTINGS
PIPE FITTINGS are manufactured with female BSPP and male BSPT threads. These robust fit-
tings are available in a comprehensive range of sizes ranging from 1/8” to 1”.
ADVANTAGES Very easy to assemble with no special tools or extra parts being necessary.
These fittings may be assembled and disassembled many times.
APPLICATIONS May be used with copper, steel or brass pipe. Install where medium to high
pressures are encountered. Standard Pipe Fittings provide good resistance
to vibration and are ideal for use in pneumatic and hydraulic control equipment.
WORKING PRESSURES Pipe Fittings are able to withstand high pressures, use the table below
as a guide ONLY. Usually pressures are determined by the pipe used rather than the Pipe Fitting.
ASSEMBLY
1. Use a sealing compound. We recommend Bondloc B567 Pipe Sealant.
2. Tighten 1.5 to 2.5 turns past hand tight.
Thread Size Hydraulic PSI Pneumatic PSI 1/8 2000 PSI 500 PSI 1/4 2000 PSI 500 PSI 3/8 2000 PSI 400 PSI 1/2 1500 PSI 400 PSI 3/4 1020 PSI 290 PSI 1” 580 PSI 180 PSI
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
5
PIPE FITTINGS
CAP
Part No 313302313304313306313308
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Tube Size----
90 DEG MALE TO FEMALE ELBOW
Part No 340002340004340006340008
Pipe Thrd (F)1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Pipe Thrd (M)1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
HEX PLUG
Part No 315202315204315206315208315212315216
Pipe Thread1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1” BSPT
Tube Size---- --
MALE/FEMALE ADAPTOR
Part No 3200020232000402320004043200060232000604320006063200080432000806320008083200120632001208
Pipe Thrd (F)1/8 BSPP1/4 BSPP1/4 BSPP3/8 BSPP3/8 BSPP3/8 BSPP1/2 BSPP1/2 BSPP1/2 BSPP3/4 BSPP3/4 BSPP
Pipe Thrd (M)1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT
REDUCING BUSHPart No 32240402322406023224060432240802 32240804322408063224120232241204 32241206322412083224160832241612
Pipe Thrd (M)1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT1/2 BSPT1/2 BSPT3/4 BSPT3/4 BSPT3/4 BSPT3/4 BSPT1” BSPT1” BSPT
HEX SOCKET
Part No 330002330004330006330008 330012330016
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP3/4 BSPP1” BSPP
Tube Size------
REDUCING SOCKET
Part No 33040402330406023304060433040802 330408043304080633041206 33041208
Pipe Thrd (F)1/4 BSPP3/8 BSPP3/8 BSPP1/2 BSPP1/2 BSPP1/2 BSPP3/4 BSPP3/4 BSPP
Pipe Thrd (F)1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP3/8 BSPP1/2 BSPP
REDUCING NIPPLE
Part No 33240402332406023324060433240802 3324080433240806332412043304120633241208
Pipe Thrd (M)1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT1/2 BSPT1/2 BSPT3/4 BSPT3/4 BSPT3/4 BSPT
Pipe Thrd (M)1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
LONG BARREL NIPPLEPart No 3327021.53327022.03327022.53327023.03327041.53327042.03327042.53327043.03327061.53327062.03327062.53327063.03327081.53327082.03327082.53327083.0
Pipe Thread1/8 BSPT1/8 BSPT1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT1/4 BSPT1/4 BSPT3/8 BSPT3/8 BSPT3/8 BSPT3/8 BSPT1/2 BSPT1/2 BSPT1/2 BSPT1/2 BSPT
Length (inches)1.502.002.503.001.502.002.503.001.502.002.503.001.502.002.503.00
HEX NIPPLE
Part No 332502332504332506332508332512332516
Pipe Thread 1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/4 BSPT1” BSPT
Tube Size------
LONG BARREL NIPPLEPart No3327021.53327022.03327022.53327023.03327041.53327042.03327042.53327043.03327061.53327062.03327062.53327063.0
Pipe Thrd (M)1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT
Tube Size
Tube Size
REDUCING SOCKET
Part No33040402330406023304060433040802 3304080433040806
Pipe Thrd (F)1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP3/8 BSPP1/2 BSPP
Pipe Thrd (M)
Tube Size
90 DEG MALE TO FEMALE ELBOW
Pipe Thrd (M)
Pipe Thrd (F)1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP1/2 BSPP3/4 BSPP
BULKHEAD UNION
Part No BU02BU04BU06
6
PIPE FITTINGS
45 DEG MALE TO FEMALE ELBOWPart No 34004502340045043400450634004508
Pipe Thrd (F)1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Pipe Thrd (M)1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
90 DEG FEMALE ELBOWPart No 350002350004350006350008
Pipe Thrd (F)1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Tube Size----
90 DEG MALE ELBOWPart No 36000202 36000402
360006043600080636000808
Pipe Thrd (M)1/8 BSPT1/4 BSPT
3/8 BSPT1/2 BSPT1/2 BSPT
Pipe Thd (M) 1/8 BSPT1/8 BSPT
1/4 BSPT3/8 BSPT
3600040436000606
1/4 BSPT3/8 BSPT
1/4 BSPT3/8 BSPT
1/2 BSPT
FEMALE TEEPart No 370002370004370006370008
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Tube Size ----
FEMALE CROSSPart No 390002390004390006390008
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
Tube Size ----
LOCK NUTPart No 11102111041110611108
Pipe Thread1/8 BSPF1/4 BSPF3/8 BSPF1/2 BSPF
Tube Size ----
MALE RUN TEEPart No 400002400004400006
Pipe Thrd (M)1/8 BSPT1/4 BSPT3/8 BSPT
Pipe Thrd (F) 1/8 BSPP1/4 BSPP3/8 BSPP
Complete With Lock Washer & NutLength
1.5”1.5”1.5”
Male Thread 5/8 UNF3/4 UNF7/8 UNF
Pipe Thread 1/8 BSPT1/4 BSPT3/8 BSPT
Length27mm30mm
Male Thread 1/4 BSPF3/8 BSPF
Pipe Thread 1/8 BSPP1/4 BSPP
BULKHEAD UNION Part No BU02LBU04L
7
COMPRESSION FITTINGS
STANDARD COMPRESSION FITTINGS are the most basic style of Compression Fitting
made. This economical fitting is available in a wide range of off the shelf sizes and styles.
ADVANTAGES These fittings are easy to assemble requiring no soldering, flaring or
deburring. Standard Compression Fittings are suitable for a wide variety of applications.
APPLICATIONS May be used with copper, aluminum, brass, plastic and steel tubing. Installation
should be where low to medium pressures are encountered, and modest tube vibration/movement
is involved. Suitable for hazardous liquids, oils and fuels.
WORKING PRESSURES Generally, working pressure is dependent upon the type of tubing
used and not the fitting, consequently the table shown should be used as a guide ONLY.
ASSEMBLY
1. Slide the nut then sleeve onto the tube ensuring threaded end of nut is facing the sleeve.
2. If using a plastic tube, push a 261 Tube Insert into the tube to prevent the tube collapsing.
3. Insert the tube into the fitting until the tube has bottomed onto the fitting shoulder.
4. Screw the nut onto the fitting and tighten hand tight. Using the table below, follow the
number of additional wrench turns.
Tube Size Hydraulic PSI Pneumatic PSI Wrench Turns 1/8 500 PSI 290 PSI 1.0 3/16 500 PSI 250 PSI 1.0 1/4 400 PSI 200 PSI 1.0 5/16 400 PSI 200 PSI 1.0 3/8 290 PSI 150 PSI 1.5 1/2 290 PSI 150 PSI 1.5 5/8 200 PSI 100 PSI 1.5
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
8
COMPRESSION FITTINGS
COMPRESSION SLEEVE – NYLON
Part No 60N0260N0360N0460N0560N0660N0860N10
Tube Size1/83/161/45/163/81/25/8
Pipe Thread-------
FEMALE CONNECTOR
Part No 660202660302660402660404660502660504660602660604660606660608660806660808
Tube Size1/83/161/41/45/165/163/83/83/83/81/21/2
Pipe Thread1/8 BSPP1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP3/8 BSPP1/2 BSPP
MALE CONNECTOR
Part No 680202680302680304680402680404680406680408680502680504680506680508680602680604680606680608680804680806680808681006681008
Tube Size1/83/163/16 1/41/41/41/45/165/165/165/163/83/83/83/81/21/21/25/85/8
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT
MALE ELBOW 90°
Part No 690202690302690402690404690406690502690504690602690604690606690608690804690806690808691006691008
Tube Size1/83/16 1/41/41/45/165/163/83/83/83/81/21/21/25/85/8
Pipe Thread1/8 BSPT1/8 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT
COMPRESSION SLEEVE – COPPER
Part No 6002600360046005600660086010
Tube Size1/83/161/45/163/81/25/8
Pipe Thread-------
COMPRESSION NUT
Part No 6102610361046105610661086110
Tube Size1/83/161/45/163/81/25/8
Pipe Thread-------
STRAIGHT UNION
Part No 6202620362046205620662086210
Tube Size1/83/161/45/163/81/25/8
Pipe Thread-------
UNION TEE
Part No 640264036404640564066408
Tube Size1/83/161/45/163/81/2
Pipe Thread------
UNION ELBOW
Part No 640264036404640564066408
Tube Size1/83/161/45/163/81/2
Pipe Thread------
3/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/4 BSPT3/8 BSPT1/2 BSPT3/8 BSPT1/2 BSPT
650265036504650565066508
9
COMPRESSION FITTINGS
METRIC COMPRESSION SLEEVE
Part No M60N04M60N06M60N08M60N10M60N12
Tube Size4mm6mm8mm10mm12mm
Pipe Thread-----
METRIC COMPRESSION NUT
Part No M6104M6106M6108M6110M6112
Tube Size4mm6mm8mm10mm12mm
Pipe Thread-----
METRIC COMPRESSION SLEEVE
METRIC TUBE INSERT
Part No M26104M26106M26108M26110M26112
Tube Size4mm6mm8mm10mm12mm
Pipe Thread-----
METRIC COMPRESSION UNION
Part No M6204M6206M6208M6210M6212
Tube Size4mm6mm8mm10mm12mm
Pipe Thread-----
METRIC MALE CONNECTOR
Part No M680402M680602M680604M680804M680806M681004M681006M681204M681206
Tube Size4mm6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
METRIC MALE ELBOW
Part No M690402M690602M690604M690804M690806M691004M691006M691204M691206
Tube Size4mm6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
TUBE INSERT
Part No 261032610426105261062610826110
Tube Size3/161/45/163/81/25/8
Tube ID3.10mm3.86mm5.03mm5.84mm9.14mm
12.20mm
FLARE FITTINGS are manufactured especially with hazardous liquids and
gases in mind. These fittings are available in sizes ranging from 3/16 to 1/2.
ADVANTAGES May be assembled and disassembled numerous times. When used with the
appropriate tubing, they can withstand high pressures. For improved resistance
to mechanical vibration the Long Flare Nut may be used.
APPLICATIONS Use with copper, brass, aluminum and flareable steel pipe. Flare Fittings
can be used where medium to high pressures are encountered and are ideal for use with
fuel, air, oil, water, LPG and Natural Gas Lines.
WORKING PRESSURES Flare Fittings are able to withstand high pressures, use the table
below as a guideline ONLY.
Usually the type of pipe used rather than the Flare Fitting itself determines the pressures.
ASSEMBLY
1. Slide the nut tapered end first onto the tubing.
2. Using a 45 degree flaring tool, flare the end of the tube until the flare sits inside
the nut. On thin wall tube, a double flare is recommended to prevent pinch off.
3. Assemble fitting to body and tighten nut to hand tight.
4. Using a wrench tighten the nut until a leak proof metal joint is achieved.
To avoid premature failure of the fitting, do not over tighten.
10
45° FLARE FITTINGS
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
Tube Size Hydraulic P.S.I Pneumatic P.S.I 1/8 2500 PSI 700 PSI 3/16 2500 PSI 700 PSI 1/4 2000 PSI 700 PSI 5/16 2000 PSI 700 PSI 3/8 1500 PSI 400 PSI 1/2 1020 PSI 250 PSI
are manufactured especially with hazardous liquids and
gases in mind. These fittings are available in sizes ranging from 3/16 to 1/2.
45° FLARE FITTINGS
11
45° FLARE FITTINGS
FLARE PLUG
Part No 39P0439P0539P0639P08
Tube Size1/4 5/163/81/2
Pipe Thread----
FLARE CAP
Part No 40C0440C0540C0640C08
Tube Size1/4 5/163/81/2
Pipe Thread----
SHORT FLARE NUT
Part No 41S0341S0441S0541S0641S08
Tube Size3/161/45/163/81/2
Pipe Thread-----
LONG FLARE NUT
Part No 41034104410541064108
Tube Size3/161/45/163/81/2
Pipe Thread-----
FLARE UNION
Part No 42034204420542064208
Tube Size3/161/45/163/81/2
Pipe Thread-----
FLARE UNION TEE
Part No 44034404440544064408
Tube Size3/161/45/163/81/2
Pipe Thread-----
FEMALE FLARE CONNECTOR
Part No 460302460402460404460502460504460602460604460606460608460804460806460808
Tube Size3/161/41/45/165/163/83/83/83/81/21/21/2
Pipe Thread1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
MALE FLARE CONNECTOR
Part No 480302480402480404480502480504480602480604480606480608480804480806480808
Tube Size3/161/41/45/165/163/83/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
MALE FLARE ELBOW
Part No 490302490402490404490502490504490602490604490606490804490806490808
Tube Size3/161/41/45/165/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
11
45° FLARE FITTINGS
FLARE PLUG
Part No 39P0439P0539P0639P08
Tube Size1/4 5/163/81/2
Pipe Thread----
FLARE CAP
Part No 40C0440C0540C0640C08
Tube Size1/4 5/163/81/2
Pipe Thread----
SHORT FLARE NUT
Part No 41S0341S0441S0541S0641S08
Tube Size3/161/45/163/81/2
Pipe Thread-----
LONG FLARE NUT
Part No 41034104410541064108
Tube Size3/161/45/163/81/2
Pipe Thread-----
FLARE UNION
Part No 42034204420542064208
Tube Size3/161/45/163/81/2
Pipe Thread-----
FLARE UNION TEE
Part No 44034404440544064408
Tube Size3/161/45/163/81/2
Pipe Thread-----
FEMALE FLARE CONNECTOR
Part No 460302460402460404460502460504460602460604460606460608460804460806460808
Tube Size3/161/41/45/165/163/83/83/83/81/21/21/2
Pipe Thread1/8 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
MALE FLARE CONNECTOR
Part No 480302480402480404480502480504480602480604480606480608480804480806480808
Tube Size3/161/41/45/165/163/83/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
MALE FLARE ELBOW
Part No 490302490402490404490502490504490602490604490606490804490806490808
Tube Size3/161/41/45/165/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
AIRBRAKE & NPT PIPE FITTINGS
14
NTA AIRBRAKE FITTINGS are manufactured specifically for use in truck and trailer air braking systems. These easy to assemble fittings can also be used in secondary air systems where D.O.T approved fittings are required.NTA Airbrake Fittings are available in 1/4” to 1/2’’ NPT Pipe Threads and 1/4” to 5/8” tubing sizes.
ADVANTAGES Easy to assemble with no tube preparation or bending required. NTA Airbrake Fittings have a built in tube support and can be assembled and disassembled many times.
APPLICATIONS These fittings are designed specifically for use in Truck and Trailer air braking systems except where temperatures exceed 200 degrees fahrenheit or where battery acid can drip on to the tubing.
WORKING PRESSURE Up to 150 P.S.I
FITTING SPECIFICATIONS NTA Airbrake Fittings are manufactured to meet D.O.T FMVSS 571.106 airbrake specifications.
TUBING SPECIFICATIONS NTA Airbrake Fittings meet the functional requirements of the SAE automotive fitting standards: SAE J246 and SAE J1131. Use with SAE Type A and B Nylon Airbrake Tubing,
ASSEMBLY1. Slide the nut and then the sleeve over the tubing2. Push the tubing into the fitting until the tubing bottoms out in the fitting3. Then slide the olive and nut down onto the fitting and tighten the nut to the correct
torque as per the table below
NTA AIRBRAKE FITTINGS
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
TUBE SIZE O.D TORQUE ft. lbs 1/4 85 – 115in. lbs 3/8 12 – 17 ft. lbs 1/2 25 – 33 ft. lbs 5/8 26 – 35 ft. lbs
14
UNION
Part NoW146204 W146206 W146208 W146210W146212
UNION TEE
Part NoW146404 W146406 W146408
Tube OD1/43/81/2
Pipe Thread---
15
NUT
Part NoW146104 W146106 W146108 W146110
NTA AIRBRAKE FITTINGS
SLEEVE
Part No W146004 W146006 W146008 W146010
Tube OD1/43/81/25/8
Pipe Thread----
MALE BRANCH TEE
Part No W14720402 W14720604
Tube OD1/43/8
Pipe Thread1/8 NPT1/4 NPT
Tube OD1/43/81/25/8
Pipe Thread----
45° MALE ELBOW
Part NoW14800402W14800404W14800604W14800606W14800804W14800806W14800808
TUBE INSERT
Part NoW148404W148406W148408W148410W148412
Tube OD1/41/43/83/81/21/21/2
Tube OD1/43/81/25/83/4
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
Pipe Thread-----
Pipe Thread
1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
Pipe Thread
Pipe Thread
Tube OD1/43/81/25/83/4
Pipe Thread-----
Pipe Thread
MALE CONNECTOR
Part NoW14680402W14680404W14680406W14680602W14680604W14680606W14680608W14680804W14680806W14680808W14681006W14681008
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT
MALE ELBOW
Part NoW14690402W14690404W14690406W14690602W14690604W14690606W14690608W14690804W14690806W14690808W14691006W14691008
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
W14720604 3/8 1/4 NPT
15
16
PUSH TO CONNECT AIRBRAKE FITTINGS
PUSH TO CONNECT AIRBRAKE FITTINGS are manufactured especially for use in truck and trailer air braking systems. These can also be used in secondary air systems where a D.O.T approved fitting is required.
ADVANTAGES These fittings are corrosion resistant and offer reduced assembly and maintenance times and also labour cost savings. Push to Connect Fittings offer a simple tube connection and disconnection with no special assembly tools required.
APPLICATIONS Push to Connect Fittings are engineered specifically for use in truck and trailer air braking systems other than between the chassis frame and axle or between towed and towing vehicle.
FITTING SPECIFICATIONS Push Connect Fittings are manufactured to meet D.O.T FMVSS106, SAE J1131 and DIN 74324 standards.
WORKING PRESSURE Up To 150 PSI
ASSEMBLY Simply push the tubing into the fitting until the tubing bottoms out. Then pull the tubing forward to gently lock into place. To remove the tubing from the fitting, simply push the collet on the end of the fitting back and pull the tubing out.
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
16
UNION – METRIC
Part No W116204MW116206MW116208MW116209MW116210MW116211MW116212MW116215MW116216M
Tube OD4mm6mm8mm9mm10mm11mm12mm15mm16mm
Pipe Thread---------
17
PUSH TO CONNECT AIRBRAKE FITTINGS
UNION – IMPERIAL
Part No W186202.5W186204W186206W186208W186210
Tube OD5/321/43/81/25/8
Pipe Thread-----
UNION TEE – IMPERIAL
Part No W186404W186406W186408W186410
Tube OD1/43/81/25/8
Pipe Thread----
MALE RUN TEE – IMPERIAL
Part No W18710402W18710404W18710604W18710606W18710806
Tube OD1/41/43/83/81/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT3/8 NPT
MALE BRANCH TEE – IMPERIAL
Part No W18720402W18720404W18720604W18720606W18720804W18720806
Tube OD1/41/43/83/81/21/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT
MALE ELBOW 45 DEG – IMPERIAL
Part No W18800402W18800404W18800604W18800606W18800804W18800806W18800808
Tube OD1/41/43/83/81/21/21/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
UNION TEE – METRICPart No W116404MW116406MW116408MW116410MW116412M
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
MALE CONNECTOR – IMPERIAL
Part No W18680402W18680404W18680406W18680602W18680604W18680606W18680608W18680804W18680806W18680808W18681006W18681008W186806M12W186806M16W186806M22
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/83/83/83/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
M12 x 1.5M16 x 1.5M22 x 1.5
MALE ELBOW 90 DEG – IMPERIAL
Part No W18690402W18690404W18690406W18690602W18690604W18690606W18690608W18690804W18690806W18690808W18691006W18691008W186906M12W186906M16W186906M22
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/83/83/83/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
M12 x 1.5M16 x 1.5M22 x 1.5
MALE CONNECTOR – METRICPart No W116806M02W116806M04W116808M02W116808M04W116808M06W116810M04W116810M06W116812M04W116812M06W116812M08W116815M06W116806M12W116806M16W116806M22W116808M12W116808M16W116808M22W116810M12W116810M16W116810M22W116812M12W116812M16W116812M22
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm12mm15mm6mm6mm6mm8mm8mm8mm10mm10mm10mm12mm12mm12mm
Pipe Thread1/8 NPT1/4 NPT1/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPTM12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5
UNION – METRIC
Part No W116204MW116206MW116208MW116209MW116210MW116211MW116212MW116215MW116216M
Tube OD4mm6mm8mm9mm10mm11mm12mm15mm16mm
Pipe Thread---------
17
PUSH TO CONNECT AIRBRAKE FITTINGS
UNION – IMPERIAL
Part No W186202.5W186204W186206W186208W186210
Tube OD5/321/43/81/25/8
Pipe Thread-----
UNION TEE – IMPERIAL
Part No W186404W186406W186408W186410
Tube OD1/43/81/25/8
Pipe Thread----
MALE RUN TEE – IMPERIAL
Part No W18710402W18710404W18710604W18710606W18710806
Tube OD1/41/43/83/81/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT3/8 NPT
MALE BRANCH TEE – IMPERIAL
Part No W18720402W18720404W18720604W18720606W18720804W18720806
Tube OD1/41/43/83/81/21/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT
MALE ELBOW 45 DEG – IMPERIAL
Part No W18800402W18800404W18800604W18800606W18800804W18800806W18800808
Tube OD1/41/43/83/81/21/21/2
Pipe Thread1/8 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
UNION TEE – METRICPart No W116404MW116406MW116408MW116410MW116412M
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
MALE CONNECTOR – IMPERIAL
Part No W18680402W18680404W18680406W18680602W18680604W18680606W18680608W18680804W18680806W18680808W18681006W18681008W186806M12W186806M16W186806M22
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/83/83/83/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
M12 x 1.5M16 x 1.5M22 x 1.5
MALE ELBOW 90 DEG – IMPERIAL
Part No W18690402W18690404W18690406W18690602W18690604W18690606W18690608W18690804W18690806W18690808W18691006W18691008W186906M12W186906M16W186906M22
Tube OD1/41/41/43/83/83/83/81/21/21/25/85/83/83/83/8
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/8 NPT1/4 NPT3/8 NPT1/2 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPT1/2 NPT
M12 x 1.5M16 x 1.5M22 x 1.5
MALE CONNECTOR – METRICPart No W116806M02W116806M04W116808M02W116808M04W116808M06W116810M04W116810M06W116812M04W116812M06W116812M08W116815M06W116806M12W116806M16W116806M22W116808M12W116808M16W116808M22W116810M12W116810M16W116810M22W116812M12W116812M16W116812M22
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm12mm15mm6mm6mm6mm8mm8mm8mm10mm10mm10mm12mm12mm12mm
Pipe Thread1/8 NPT1/4 NPT1/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT3/8 NPTM12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5
W18801008 5/8 1/2 NPT
W116404M 4MM -
17
18
PUSH TO CONNECT AIRBRAKE FITTINGS
MALE ELBOW – METRIC
Part No W116906M02W116906M04W116908M02W116908M04W116908M06W116910M04W116910M06W116912M04W116912M06W116912M08W116906M12W116906M16W116906M22W116908M12W116908M16W116908M22W116910M12W116910M16W116910M22W116912M12W116912M16W116912M22
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm12mm6mm6mm6mm8mm8mm8mm10mm10mm10mm12mm12mm12mm
Pipe Thread1/8 NPT1/4 NPT1/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5M12 x 1.5M16 x 1.5M22 x 1.5
18
19
HEX TAPER PLUG – NPT
Part No W315202W315204W315206W315208W315212
Pipe Thread1/8 NPT1/4 NPT3/8 NPT1/2 NPT3/4 NPT
METRIC PLUGS – PARALLEL THREAD
Part No 3152M163152M22
Pipe Thread (M)M16 x 1.5M22 x 1.5
PIPE FITTINGS - NPT & METRIC
PARALLEL THREAD
MALE/FEMALE ADAPTOR - NPT
Part No W32000402W32000604W32000806W32001208
Pipe Thrd (F)1/4 NPT 3/8 NPT1/2 NPT 3/4 NPT
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
METRIC TO NPT ADAPTORS
Part No 3200M12023200M12043200M14043200M16043200M16063200M22043200M2206
Pipe Thrd (M)M12 x 1.5 M12 x 1.5M14 x 1.5 M16 x 1.5M16 x 1.5M22 x 1.5M22 x 1.5
REDUCING BUSH – NPT
Part NoW32200402W32200602W32200604W32200802W32200804W32200806W32201204W32201206W32201208W322012M22
Pipe Thrd (M)1/4 NPT3/8 NPT3/8 NPT 1/2 NPT1/2 NPT1/2 NPT3/4 NPT3/4 NPT3/4 NPT3/4 NPT
Pipe Thrd (F)1/8 NPT1/4 NPT1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT
Pipe Thrd (F)1/8 NPT 1/8 NPT1/4 NPT1/8 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
HEX SOCKET – NPT
Part No W330002W330004W330006
Pipe Thrd (F)1/8 NPT 1/4 NPT3/8 NPT
Pipe Thrd (M)---
Pipe Thrd (M)
REDUCING NIPPLE - NPT
Part No W33240402W33240604W33240804W33240806W33241208
Pipe Thrd (M)1/4 NPT3/8 NPT 1/2 NPT1/2 NPT3/4 NPT
Pipe Thrd (M)1/8 NPT 1/4 NPT1/4 NPT3/8 NPT 1/2 NPT
HEX NIPPLE – NPT
Part No W332502W332504W332506W332512
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT3/4 NPT
Pipe Thrd (M)----
MALE / FEMALE ELBOW 45 DEG - NPT
Part No W335002W335004W335006
Pipe Thrd (F)1/8 NPT1/4 NPT3/8 NPT
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT
Pipe Thrd (M)
MALE / FEMALE ELBOW 90 DEG - NPT
Part No W340002W340004W340006W340008
Pipe Thrd (F)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
MALE BRANCH TEE - NPT
Part No W360002W360004W360006W360008W3600M2215
Pipe Thrd (F)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
FEMALE TEE – NPT
Part No W370002W370004W370006W370008
Pipe Thread (F)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
Pipe Thrd (M)Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
MALE RUN TEE – NPT
Part No W375002W375004W375006W375008W3750M2215
Pipe Thrd (F)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
Pipe Thrd (M)1/8 NPT1/4 NPT3/8 NPT1/2 NPT
M22 x 1.5
METRIC THREADED HOSE TAILS
Part No W20906M16W20908M16W20908M22
Hose Size3/81/21/2
Pipe ThreadM16 x 1.5M16 x 1.5 M22 x 1.5
MALE HOSE TAILS - NPT
Part No W2090504W2090604W2090606W2090804W2090806W2090808
Hose Size5/163/83/81/21/21/2
Pipe Thread1/4 NPT1/4 NPT3/8 NPT1/4 NPT3/8 NPT1/2 NPT
Pipe Thread
19
20
ROADRANGER FITTINGS
ROADRANGER OLIVE
Part No RR6002RR6025
Tube OD 1/8
5/32
Pipe Thread --
ROADRANGER NUT
Part No RR6102RR6125
Tube OD1/8
5/32
Pipe Thread--
ead
ROADRANGER UNION
Part No RR6202RR6225
Tube OD1/8
5/32
Pipe Thread--
ROADRANGER MALE CONNECTOR
Part No RR680202RR682502
Tube OD1/8
5/32
Pipe Thread1/8 NPT1/8 NPT
ROADRANGER MALE CONNECTORROADRANGER MALE CONNECTOR
ead
ROADRANGER MALE ELBOW
Part No RR690202RR692502
Tube OD1/8
5/32
Pipe Thread1/8 NPT1/8 NPT
RUBBER AIRBRAKE HOSE ENDS - D.O.T
HOSE SLEEVE
Part No W149006W149008
Hose Size 3/8 I.D 1/2 I.D
HOSE NUT
Part No W149006W149008
Hose Size 3/8 I.D 1/2 I.D
ROADRANGER MALE ELBOW
Part No W14920604W14920606W14920806W14920808
• Use with Rubber Airbrake Hose J1402• These fittings are reusable by replacement
of hose sleeve & hose nut
Tube OD3/83/81/2 1/2
Pipe Thread1/4 NPT3/8 NPT3/8 NPT1/2 NPT
REMOTE DRAIN VALVE
Part No W1421W1421M22
Pipe Thread1/4” NPTM22 x 1.5
Cable Length5 FT
Not Supplied
TEST POINTS
Part No XBFWTP04XBFWTP06XBFWTPM16
Pipe Thread1/4 NPT3/8 NPT
M16 x 1.5
PIPE FITTINGS - NPT
20
PNEUMATIC FITTINGS
22
PNEUMATIC FITTINGS
CAP METRIC
Part NoPF153306PF153308PF153310PF153312
Tube OD6mm8mm10mm12mm
Pipe Thread----
PLUG METRIC
Part NoPF155206PF155208PF155210PF155212
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION STRAGHT METRIC
Part NoPF156204PF156206PF156208PF156210PF156212
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
REDUCING UNION METRIC
Part NoPF1562R0604PF1562R0806PF1562R1006PF1562R1008PF1562R1210
Tube OD6mm8mm10mm10mm12mm
Pipe Thread4mm6mm6mm8mm10mm
UNION Y METRIC
Part NoPF156306PF156308PF156310PF156312
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION TEE METRIC
Part NoPF156404PF156406PF156408PF156410PF156412
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
UNION ELBOW METRIC
Part NoPF156504PF156506PF156508PF156510PF156512
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
STEM REDUCER METRIC
Part NoPF15670604PF15670806PF15671008PF15671210
Tube OD6mm8mm10mm12mm
Tube OD4mm6mm8mm10mm
UNION TEE IMPERIAL
Part NoPF126404 PF126406 PF126408
UNION STRAIGHT IMPERIAL
Part No PF126202.5 PF126204 PF126206 PF126208
Tube OD5/321/43/81/2
Pipe Thread---
Tube OD1/43/81/2
Pipe Thread---
MALE CONNECTOR IMPERIAL
Part NoPF12680202PF12680402 PF12680404 PF12680504PF12680602PF12680604 PF12680606PF12680804PF12680806 PF12680808
Tube OD1/81/41/45/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
SWIVEL MALE ELBOW IMPERIAL
Part NoPF12690402PF12690404PF12690502PF12690504PF12690506PF12690602PF12690604PF12690606PF12690804PF12690806PF12690808
Tube OD1/41/45/165/165/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
UNION ELBOW IMPERIAL
Part NoPF126504 PF126508
Tube OD1/41/2
Pipe Thread--
FEMALE CONNECTOR METRIC
Part NoPF15660602 PF15660604 PF15660804 PF15661004PF15661204PF15661206 PF15661208
Tube OD6mm6mm8mm10mm12mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
22
PNEUMATIC FITTINGS
CAP METRIC
Part NoPF153306PF153308PF153310PF153312
Tube OD6mm8mm10mm12mm
Pipe Thread----
PLUG METRIC
Part NoPF155206PF155208PF155210PF155212
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION STRAGHT METRIC
Part NoPF156204PF156206PF156208PF156210PF156212
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
REDUCING UNION METRIC
Part NoPF1562R0604PF1562R0806PF1562R1006PF1562R1008PF1562R1210
Tube OD6mm8mm10mm10mm12mm
Pipe Thread4mm6mm6mm8mm10mm
UNION Y METRIC
Part NoPF156306PF156308PF156310PF156312
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION TEE METRIC
Part NoPF156404PF156406PF156408PF156410PF156412
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
UNION ELBOW METRIC
Part NoPF156504PF156506PF156508PF156510PF156512
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
STEM REDUCER METRIC
Part NoPF15670604PF15670806PF15671008PF15671210
Tube OD6mm8mm10mm12mm
Tube OD4mm6mm8mm10mm
UNION TEE IMPERIAL
Part NoPF126404 PF126406 PF126408
UNION STRAIGHT IMPERIAL
Part No PF126202.5 PF126204 PF126206 PF126208
Tube OD5/321/43/81/2
Pipe Thread---
Tube OD1/43/81/2
Pipe Thread---
MALE CONNECTOR IMPERIAL
Part NoPF12680202PF12680402 PF12680404 PF12680504PF12680602PF12680604 PF12680606PF12680804PF12680806 PF12680808
Tube OD1/81/41/45/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
SWIVEL MALE ELBOW IMPERIAL
Part NoPF12690402PF12690404PF12690502PF12690504PF12690506PF12690602PF12690604PF12690606PF12690804PF12690806PF12690808
Tube OD1/41/45/165/165/163/83/83/81/21/21/2
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
UNION ELBOW IMPERIAL
Part NoPF126504 PF126508
Tube OD1/41/2
Pipe Thread--
FEMALE CONNECTOR METRIC
Part NoPF15660602 PF15660604 PF15660804 PF15661004PF15661204PF15661206 PF15661208
Tube OD6mm6mm8mm10mm12mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
PF126504 1/4 -PF126505 5/16 -PF126508 1/2 -
22
23
PNEUMATIC FITTINGS
SWIVEL MALE RUN TEE METRIC
Part NoPF15710602PF15710604PF15710802PF15710804PF15711004PF15711006PF15711204PF15711206
Tube OD6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
SWIVEL MALE BRANCH TEE METRIC
Part NoPF15720402PF15720602PF15720604PF15720802PF15720804PF15721004PF15721006PF15721204PF15721206
Tube OD4mm6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
BULKHEAD UNION METRIC
Part NoPF157406PF157408PF157410PF157412
Tube OD6mm8mm10mm12mm
Pipe Thread----
STEM ELBOW METRIC
Part NoPF15750606PF15750808PF15751010PF15751212
Tube OD6mm8mm10mm12mm
Pipe Thread----
MALE CONNECTOR METRIC
Part NoPFP15680402PFP15680404PFP15680405PFP15680602PFP15680604PFP15680605PFP15680802PFP15680804PFP15680806PFP15681004PFP15681006PFP15681204PFP15681206
Tube OD4mm4mm4mm6mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP
M51/8 BSPP1/4 BSPP
M51/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP
SWIVEL MALE ELBOW METRIC
Part NoPF15690402PF15690404PF15690602PF15690604PF15690802PF15690804PF15690806PF15691004PF15691006PF15691204PF15691206
Tube OD4mm4mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
SWIVEL MALE ELBOW METRIC
Part NoPFP15690402PFP15690404PFP15690405PFP15690602PFP15690604PFP15690605PFP15690802PFP15690804PFP15690806PFP15691004PFP15691006PFP15691204PFP15691206
Tube OD4mm4mm4mm6mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP
M51/8 BSPP1/4 BSPP
M51/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP
MALE CONNECTOR METRIC
Part NoPF15680402PF15680404PF15680602PF15680604PF15680802PF15680804PF15680806PF15681004PF15681006PF15681204PF15681206PF15681208
Tube OD4mm4mm6mm6mm8mm8mm8mm10mm10mm12mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
INLINE FLOW CONTROLLER
Part NoPFFCI06PFFCI08PFFCI10
Tube OD6mm8mm10mm
Pipe Thread---
BANJO FLOW CONTROLLER
Part NoPFBFC0602PFBFC0604PFBFC0804PFBFC0806PFBFC1004PFBFC1006PFBFC1204PFBFC1206PFBFC1208
Tube OD6mm6mm8mm8mm10mm10mm12mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
M5
M5
M5
M5
23
MALE CONNECTOR METRIC
Part NoPFN15680402PFN15680404PFN15680602PFN15680604PFN15680802PFN15680804PFN15680806PFN15681004PFN15681006PFN15681204PFN15681206
Tube OD4mm4mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT
MALE CONNECTOR METRIC
Part NoPFNP15680402PFNP15680404PFNP15680602PFNP15680604PFNP15680802PFNP15680804PFNP15680806PFNP15681004PFNP15681006PFNP15681204PFNP15681206
Tube OD4mm4mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP
SWIVEL MALE ELBOW METRIC
Part NoPFNP15690402PFNP15690404PFNP15690602PFNP15690604PFNP15690802PFNP15690804PFNP15690806PFNP15691004PFNP15691006PFNP15691204PFNP15691206
Tube OD4mm4mm6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP
BULKHEAD UNION METRIC
Part NoPFN157406PFN157408PFN157410PFN157412
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION STRAIGHT METRIC
Part NoPFN156204PFN156206PFN156208PFN156210PFN156212
Tube OD4mm6mm8mm10mm12mm
Pipe Thread-----
UNION TEE METRIC
Part NoPFN156406PFN156408PFN156410PFN156412
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION ELBOW METRIC
Part NoPFN156506PFN156508PFN156510PFN156512
Tube OD6mm8mm10mm12mm
Pipe Thread----
STEM REDUCER METRIC
Part NoPFN15670604PFN15670806PFN15671008PFN15671210
Tube OD6mm8mm10mm12mm
Tube OD4mm6mm8mm10mm
STEM ADAPTOR METRIC
Part NoPFNP15590602PFNP15590604PFNP15590802PFNP15590804PFNP15591004PFNP15591006PFNP15591206
Tube OD6mm6mm8mm8mm10mm10mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP1/4 BSPP3/8 BSPP3/8 BSPP
PLUG
Part NoPFNP125202PFNP125204PFNP125206
Tube OD---
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP
24
PNEUMATIC FITTINGS
SWIVEL MALE ELBOW METRIC
Part NoPFN15690602PFN15690604PFN15690802PFN15690804PFN15690806PFN15691004PFN15691006PFN15691206
6mm6mm8mm8mm8mm10mm10mm12mm
Tube OD Pipe Thread 1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT
24
25
PNEUMATIC FITTINGS
SILENCERS
FLOW CONTROL SILENCER
Part NoPFFCS02PFFCS04PFFCS06PFFCS08
Tube OD----
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
SILENCER
Part NoPFNPS02PFNPS04PFNPS06
Tube OD---
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP
SILENCER POLY
Part NoPFPS02PFPS04PFPS06PFPS08
Tube OD----
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
UNION CHECK VALVE F/F
Part NoPFNRV06PFNRV08PFNRV10PFNRV12
Tube OD6mm8mm10mm12mm
Pipe Thread----
UNION CHECK VALVE M/F
Part NoPFCVMF02PFCVMF04PFCVMF06PFCVMF08
Pipe Thrd (M)1/8 BSPT1/4 BSPT3/8 BSPT1/2 BSPT
Pipe Thrd (F)1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
UNION CHECK VALVE F/F
Part NoPFCV02PFCV04PFCV06PFCV08
Tube OD----
Pipe Thread1/8 BSPP1/4 BSPP3/8 BSPP1/2 BSPP
CHECK VALVES
25
CONTENTS
INDUSTRIAL BRASS FITTINGSAirline Fittings .......................................................................... 2
Pipe Fittings ............................................................................. 4
Compression Fittings .............................................................. 7
Flare Fittings .......................................................................... 10
AIRBRAKE & NPT PIPE FITTINGSNTA Airbrake Fittings D.O.T Approved ................................ 13
Push to Connect Airbrake Fittings D.O.T Approved .......... 16
Pipe Fittings NPT & Metric ................................................... 19
Road Ranger Fittings ............................................................ 20
Re-Usable Rubber Airbrake Hose Ends D.O.T Approved .. 20
PNEUMATIC FITTINGSPneumatic Fittings Imperial & Metric .................................. 22
FLUIDFIT FITTINGSFluidFit Fittings Imperial & Metric ........................................ 27
ARO FITTINGSARO Couplers ........................................................................ 31
A210 ARO Coupler Adaptors ................................................ 31
A380 ARO Coupler Adaptors ................................................ 31
A400 ARO Coupler Adaptors ................................................ 31
TAPS & VALVESLever Handle Ball Valves ....................................................... 32
Tee Handle Ball Valves .......................................................... 33
Miniature Ball Valves ............................................................. 34
Gates Valves ........................................................................... 34
Needle Valves ......................................................................... 34
Drain Cocks ........................................................................... 34
Check Valves .......................................................................... 35
Gas Approved Ball Valves ..................................................... 35
Brass Lever Taps ................................................................... 35
HOSE CLIPS & CLAMPSBreeze Miniature Hose Clamps ............................................ 37
Breeze Power Seal Hose Clamps ........................................ 37
Oetiker Clips .......................................................................... 37
Pipe Retaining Clips – Stainless Steel ................................. 37
TUBING & HOSECopper Tubing ....................................................................... 39
Bundy Tubing ......................................................................... 39
Nylon Airbrake Tubing ........................................................... 39
Spiral Tie................................................................................. 39
Rubber Airbrake Hose J1402................................................ 40
Rubber Fuel Hose .................................................................. 40
Heater Hose ........................................................................... 40
PVC Airline Hose.................................................................... 40
Easy Clean & Slide Washdown Hose ................................... 41
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
ERGONOMIC WASHDOWN GUNRB65 Ergonomic Washdown Gun ........................................ 43
AIRBRAKING ACCESSORIES
Suzi Coils ................................................................................ 45
Fifth Wheel Slider Kits ........................................................... 45
BONDLOC RANGEAnaerobic Range ................................................................... 47
Cyanoacrylate Range ............................................................ 48
Sealant Range ........................................................................ 58
Structural Range ................................................................... 59
Maintenance Product ............................................................ 59
MISCELLANEOUSMiscellaneous ........................................................................ 51
CONVERSION TABLES & PROFILESConversions ........................................................................... 52
Profiles ................................................................................... 53
FLUIDFIT FITTINGS
Fittings for Potable Water,Drink Dispensers and Beverages.
27
FLUIDFIT FITTINGS
UNION ELBOW
Part NoFF166506FF166508FF166510FF166512
Tube OD6mm8mm10mm12mm
FEMALE ADAPTOR
Part NoFF16660602FF16660804FF16661008FF16661206FF16661208
Tube OD6mm8mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/2 BSPP3/8 BSPP1/2 BSPP
STEM REDUCER
Part NoFF16670604FF16670806FF16671008
Tube OD6mm8mm10mm
Tube OD4mm6mm8mm
REDUCING UNION
Part NoFF1662R0604 FF1662R0806 FF1662R1008FF1662R1210
UNION STRAIGHT
Part No FF166206 FF166208 FF166210FF166212FF166215
Tube OD6mm8mm10mm12mm15mm
Tube OD6mm8mm10mm12mm
Tube OD4mm6mm8mm10mm
UNION TEE
Part NoFF166406FF166408FF166410FF166412
Tube OD6mm8mm10mm12mm
UNION Y
Part NoFF166306 FF166308 FF166310 FF166312
Tube OD6mm8mm10mm12mm
MALE ADAPTOR
Part No FF16680602 FF16680604 FF16680802FF16680804FF16680806FF16681004FF16681006FF16681206FF16681208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
MALE ADAPTOR (PARALLEL)
Part No FFP16680602 FFP16680604 FFP16680802FFP16680804FFP16680806FFP16681004FFP16681006FFP16681206FFP16681208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP3/8 BSPP1/2 BSPP
MALE ELBOW
Part No FF16690602 FF16690604 FF16690804FF16690806FF16691004FF16691006FF16691206FF16691208
Tube OD6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
STEM ADAPTOR
Part No FF16590602 FF16590604 FF16590802FF16590804FF16590806FF16591004FF16591006FF16591206FF16591208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
27
FLUIDFIT FITTINGS
UNION ELBOW
Part NoFF166506FF166508FF166510FF166512
Tube OD6mm8mm10mm12mm
FEMALE ADAPTOR
Part NoFF16660602FF16660804FF16661008FF16661206FF16661208
Tube OD6mm8mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/2 BSPP3/8 BSPP1/2 BSPP
STEM REDUCER
Part NoFF16670604FF16670806FF16671008
Tube OD6mm8mm10mm
Tube OD4mm6mm8mm
REDUCING UNION
Part NoFF1662R0604 FF1662R0806 FF1662R1008FF1662R1210
UNION STRAIGHT
Part No FF166206 FF166208 FF166210FF166212FF166215
Tube OD6mm8mm10mm12mm15mm
Tube OD6mm8mm10mm12mm
Tube OD4mm6mm8mm10mm
UNION TEE
Part NoFF166406FF166408FF166410FF166412
Tube OD6mm8mm10mm12mm
UNION Y
Part NoFF166306 FF166308 FF166310 FF166312
Tube OD6mm8mm10mm12mm
MALE ADAPTOR
Part No FF16680602 FF16680604 FF16680802FF16680804FF16680806FF16681004FF16681006FF16681206FF16681208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
MALE ADAPTOR (PARALLEL)
Part No FFP16680602 FFP16680604 FFP16680802FFP16680804FFP16680806FFP16681004FFP16681006FFP16681206FFP16681208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPP1/4 BSPP1/8 BSPP1/4 BSPP3/8 BSPP1/4 BSPP3/8 BSPP3/8 BSPP1/2 BSPP
MALE ELBOW
Part No FF16690602 FF16690604 FF16690804FF16690806FF16691004FF16691006FF16691206FF16691208
Tube OD6mm6mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
STEM ADAPTOR
Part No FF16590602 FF16590604 FF16590802FF16590804FF16590806FF16591004FF16591006FF16591206FF16591208
Tube OD6mm6mm8mm8mm8mm10mm10mm12mm12mm
Pipe Thread1/8 BSPT1/4 BSPT1/8 BSPT1/4 BSPT3/8 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
28
28
FLUIDFIT FITTINGS
LOCK CLIP
Part No FFLCM06 FFLCM08 FFLCM10FFLCM12
Tube OD6mm8mm10mm12mm
PLUG
Part No FFPM06 FFPM08 FFPM10FFPM12
Tube OD6mm8mm10mm12mm
SHUT-OFF VALUE
Part No FFVSM06 FFVSM08 FFVSM10FFVSM12
Tube OD6mm8mm10mm12mm
UNION STRAIGHT
Part No FF176204 FF176206 FF176208
Tube OD1/43/81/2
REDUCING UNION
Part No FF1762R0504 FF1762R0604 FF1762R0605FF1762R0806
Tube OD5/163/83/81/2
Tube OD1/41/45/163/8
UNION Y
Part No FF176304 FF176306 FF176308
Tube OD1/43/81/2
UNION TEE
Part No FF176404 FF176406 FF176408
Tube OD1/43/81/2
UNION ELBOW
Part No FF176504 FF176506 FF176508
Tube OD1/43/81/2
FEMALE ADAPTOR
Part No FF17660408 FF176605716F FF17660608FF176606716F
Tube OD1/45/163/83/8
Pipe Thread1/2 BSPP7/16 UNF1/2 BSPP7/16 UNF
STEM REDUCER
Part No FF17670504 FF17670604 FF17670605FF17670806
Tube OD5/163/83/81/2
Tube OD1/41/45/163/8
MALE ADAPTOR
Part No FF17680402 FF17680404 FF17680604FF17680606FF17680806
Tube OD1/41/43/83/81/2
Pipe Thread 1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT3/8 BSPT
CHECK VALVE
Part No FFCVM06 FFCVM08 FFCVM10FFCVM12
Tube OD6mm8mm10mm12mm
BULKHEAD UNION
Part No FF167406 FF167408 FF167410FF167412
Tube OD6mm8mm10mm12mm
28
FLUIDFIT FITTINGS
LOCK CLIP
Part No FFLCM06 FFLCM08 FFLCM10FFLCM12
Tube OD6mm8mm10mm12mm
PLUG
Part No FFPM06 FFPM08 FFPM10FFPM12
Tube OD6mm8mm10mm12mm
SHUT-OFF VALUE
Part No FFVSM06 FFVSM08 FFVSM10FFVSM12
Tube OD6mm8mm10mm12mm
UNION STRAIGHT
Part No FF176204 FF176206 FF176208
Tube OD1/43/81/2
REDUCING UNION
Part No FF1762R0504 FF1762R0604 FF1762R0605FF1762R0806
Tube OD5/163/83/81/2
Tube OD1/41/45/163/8
UNION Y
Part No FF176304 FF176306 FF176308
Tube OD1/43/81/2
UNION TEE
Part No FF176404 FF176406 FF176408
Tube OD1/43/81/2
UNION ELBOW
Part No FF176504 FF176506 FF176508
Tube OD1/43/81/2
FEMALE ADAPTOR
Part No FF17660408 FF176605716F FF17660608FF176606716F
Tube OD1/45/163/83/8
Pipe Thread1/2 BSPP7/16 UNF1/2 BSPP7/16 UNF
STEM REDUCER
Part No FF17670504 FF17670604 FF17670605FF17670806
Tube OD5/163/83/81/2
Tube OD1/41/45/163/8
MALE ADAPTOR
Part No FF17680402 FF17680404 FF17680604FF17680606FF17680806
Tube OD1/41/43/83/81/2
Pipe Thread 1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT3/8 BSPT
CHECK VALVE
Part No FFCVM06 FFCVM08 FFCVM10FFCVM12
Tube OD6mm8mm10mm12mm
BULKHEAD UNION
Part No FF167406 FF167408 FF167410FF167412
Tube OD6mm8mm10mm12mm
29
FLUIDFIT FITTINGS
CHECK VALVE
Part No FFCV04 FFCV05FFCV06FFCV08
Tube OD1/45/163/81/2
LOCK CLIP
Part No FFLC04 FFLC06FFLC08
Tube OD1/43/81/2
PLUG
Part No FFP04 FFP05FFP06 FFP08
Tube OD1/45/163/81/2
SHUT-OFF VALVE
Part No FFVS04 FFVS06FFVS06
Tube OD1/43/81/2
POLYETHYLENE TUBING
Black 6mm 8mm10mm12mm1/45/163/8
Blue6mm8mm10mm12mm
1/45/16
Red6mm8mm10mm12mm
1/45/16
Natural6mm8mm10mm12mm
1/45/163/81/2
BULKHEAD UNION
Part No FF177404 FF177406FF177408
Tube OD1/43/81/2
MALE ELBOW
Part No FF17690402 FF17690404FF17690604FF17690606FF17690806FF17690808
Tube OD1/41/43/83/81/21/2
Pipe Thread1/8 BSPT1/4 BSPT1/4 BSPT3/8 BSPT3/8 BSPT1/2 BSPT
MALE ADAPTOR (PARALLEL)
Part No FFP17680402 FFP17680404FFP17680604FFP17680606
Tube OD1/41/43/83/8
Pipe Thread1/8 BSPP1/4 BSPP1/4 BSPP3/8 BSPP
29
COIL LENGTHS AVAILABLE: 25m, 50m & 100m
COMING SOON
30
ARO FITTINGS
31
ARO COUPLERS
A210 ARO COUPLER
1/4” BSP Female Thread
Use with: A2607, A2608, A2609, A2700, A3946, A3947 & A3948 ARO TailsSteel Zinc Plated A380 ARO COUPLER
3/8” BSP Female Thread
Use with: A3807, A3808, A3809 & A3810 ARO TailsSteel Nickel Plated
ARO A400 COUPLER
1/2” BSP Female Thread
Use with: A300405, A300415 & A308005 ARO TailsSteel Zinc Plated
A2607 MALE CONNECTOR
1/8” BSPT Male Thread Steel Zinc Plated
A2608 MALE CONNECTOR
1/4” BSPT Male ThreadSteel Zinc Plated
A2609 FEMALE CONNECTOR1/4” BSPP Female ThreadSteel Zinc Plated
A2700 MALE CONNECTOR
3/8 BSPT Male ThreadSteel Zinc Plated
A210 ARO COUPLER ADAPTORS
A3946 HOSE INSERT
1/4” Hose Barb – Coupler Steel Zinc Plated
A3947 HOSE INSERT
5/16” Hose Barb – Coupler Steel Zinc Plated
A3948 HOSE INSERT3/8” Hose Barb – Coupler Steel Zinc Plated
A380 ARO COUPLER ADAPTORS
A3807 MALE CONNECTOR
1/4” BSPT Male ThreadSteel Zinc Plated
A3808 MALE CONNECTOR
3/8 BSPT Male Thread Steel Zinc Plated
A3809 FEMALE CONNECTOR3/8” BSPP Female ThreadZinc Plated Steel
A3810 HOSE INSERT
3/8” Hose Barb – CouplerZinc Plated Steel
A400 ARO COUPLER ADAPTORS
A308-005 HOSE INSERT
1/2” Hose Barb – CouplerSteel Zinc Plated
A300-405 MALE CONNECTOR
1/2” BSPT Male Thread Steel Zinc Plated
A300-415 FEMALE CONNECTOR
1/2” BSPP Female ThreadSteel Zinc Plated
32
TAPS & VALVES
33
TAPS & VALVES
BALL VALVE LEVER HANDLE F & F
Part NoTVBFLN08TVBFLN10TVBFLN15TVBFLN20TVBFLN25TVBFLN32TVBFLN40TVBFLN50
Body Material: Brass Nickel Plated - Full PortThreads: BSPP Pipe ThreadHandle Material: Stainless Steel Black Handle
Description1/4 Ball Valve Lever Handle F/F3/8 Ball Valve Lever Handle F/F1/2 Ball Valve Lever Handle F/F3/4 Ball Valve Lever Handle F/F1” Ball Valve Lever Handle F/F1-1/4 Ball Valve Lever Handle F/F1-1/2 Ball valve Lever Handle F/F2” Ball Valve Lever Handle F/F
BALL VALVE LEVER HANDLE M & F
Part NoTVBLMF08TVBLMF10TVBLMF15TVBLMF20TVBLMF25TVBLMF32TVBLMF40TVBLMF50
Body Material: Brass Nickel Plated - Full PortThreads: BSPP & BSPT Pipe ThreadHandle Material: Stainless Steel Red Handle
Description1/4 Ball Valve Lever Handle M/F3/8 Ball Valve Lever Handle M/F1/2 Ball Valve Lever Handle M/F3/4 Ball Valve Lever Handle M/F1” Ball Valve Lever Handle M/F1-1/4 Ball Valve Lever Handle M/F1-1/2 Ball Valve Lever Handle M/F2” Ball Valve Lever Handle M/F
BALL VALVE TEE HANDLE F & F
Part NoTVBSFT08TVBSFT10TVBSFT12TVBSFT20TVBSFT25
Body Material: Brass Nickel Plated - Full PortThreads: BSPP Pipe ThreadHandle: Red Painted Aluminium
Description1/4 Ball Valve Tee Handle F/F3/8 Ball Valve Tee Handle F/F1/2 Ball Valve Tee Handle F/F3/4 Ball Valve Tee Handle F/F1” Ball Valve Tee Handle F/F
BALL VALVE TEE HANDLE M & F
Part NoTVBTMF08TVBTMF10TVBTMF15TVBTMF20TVBTMF25
Body Material: Brass Nickel Plated - Full PortThreads: BSPP & BSPT Pipe ThreadHandle: Red Painted Aluminium
Description1/4 Ball Valve Tee Handle M/F3/8 Ball Valve Tee Handle M/F1/2 Ball Valve Tee Handle M/F3/4 Ball Valve Tee Handle M/F1” Ball Valve Tee Handle M/F
34
34
TAPS & VALVES
BALL VALVE MINIATURE F & F
Part NoTVBSF06TVBSF08TVBSF10TVBSF12
Body Material: Brass Nickel PlatedThreads: BSPP Pipe ThreadHandle: Plastic
Description1/8 Ball Valve Mini F/F1/4 Ball Valve Mini F/F3/8 Ball Valve Mini F/F1/2 Ball Valve Mini F/F
BALL VALVE MINIATURE M & F
Part NoTVBSMF06TVBSMF08TVBSMF10TVBSMF12
Body Material: Brass Nickel PlatedThreads: BSPP & BSPT Pipe ThreadHandle: Plastic
Description1/8 Ball Valve Mini M/F1/4 Ball Valve Mini M/F3/8 Ball Valve Mini M/F1/2 Ball Valve Mini M/F
GATE VALVE - EZI FLO
Part NoTVGBFK15TVGBFK20TVGBFK25TVGBFK32TVGBFK40
Body Material: Brass – Full PortThreads: BSPP Pipe ThreadHandle: Cast Painted Blue
Description1/2 Gate Valve F/F3/4 Gate Valve F/F1” Gate Valve F/F1-1/4 Gate Valve F/F1-1/2 Gate Valve F/F
NEEDLE VALVE
Part NoTVNV10402TVNV10404TVNV10406
Body Material: Brass Threads: BSPP Pipe ThreadHandle: Brass
Description1/8 Needle Valve F/F1/4 Needle Valve F/F3/8 Needle Valve F/F
DRAIN COCK
Part NoTVDC02TVDC04TVDC06
Body Material: Brass Threads: BSPTHandle: Plated Steel
Description1/8 Drain Cock1/4 Drain Cock3/8 Drain Cock
35
35
TAPS & VALVES
CHECK VALVE
Part NoTVCVB15TVCVB20TVCVB25TVCVB32TVCVB40TVCVB50
DescriptionVALVE SPRING CHECK BRASS 1/2” HEAVY DUTYVALVE SPRING CHECK BRASS 3/4” HEAVY DUTYVALVE SPRING CHECK BRASS 1” HEAVY DUTYVALVE SPRING CHECK BRASS 1-1/4 HEAVY DUTYVALVE SPRING CHECK BRASS 1-1/2 HEAVY DUTYVALVE SPRING CHECK BRASS 2” HEAVY DUTY
GAS APPROVED BALL VALVE LEVER HANDLE
Part NoTVGBFL08TVGBFL10TVGBFL15TVGBFL20TVGBFL25
DescriptionBALL VALVE AGA APPROVED L/HANDLE F/F 1/4” (GAS TIGHT)BALL VALVE AGA APPROVED L/HANDLE F/F 3/8” (GAS TIGHT)BALL VALVE AGA APPROVED L/HANDLE F/F 1/2” (GAS TIGHT)BALL VALVE AGA APPROVED L/HANDLE F/F 3/4” (GAS TIGHT)BALL VALVE AGA APPROVED L/HANDLE F/F 1” (GAS TIGHT)
GAS APPROVED BALL VALVE TEE HANDLE
Part NoTVGBFT08TVGBFT10TVGBFT15TVGBFT20
DescriptionBALL VALVE AGA APPROVED T/HANDLE F-F 1/4” BALL VALVE AGA APPROVED T/HANDLE F-F 3/8” BALL VALVE AGA APPROVED T/HANDLE F-F 1/2” BALL VALVE AGA APPROVED T/HANDLE F-F 3/4”
BRASS LEVER TAPS
Part NoTV31E02TV32E04
TV48E0202TV49E0404
DescriptionLEVER TAP FEMALE FEMALE 1/8 BSP LEVER TAP FEMALE FEMALE 1/4 BSP
LEVER TAP MALE FEMALE 1/8 BSP LEVER TAP MALE FEMALE 1/4 BSP
36
HOSE CLIPS & CLAMPS
37
HOSE CLIPS & CLAMPS
BREEZE MINIATURE
STAINLESS STEEL HOSE CLIPS
A lightweight, streamlined clamp generally used in small diameter applications such as air and fuel lines. Ideal for use in tight fitting or difficult to reach areas. This clamp creates high sealing pressure with only 10-15 1n. /lbs. of installation torque.
5/16” (7.9mm) band1/4” (6.4mm) slotted hex head screw400 Series All Stainless Steel
Clamping Range6 – 16mm11 – 20mm
Part NoMSS04MSS06
BREEZE POWER – SEAL
STAINLESS STEEL HOSE CLIPS
A proven clip incorporating the 4 piece Quadra Lock Housing for superior strength and quality. Use in general clamping and automotive type applications.
1/2” (12.7mm) band5/16” (7.9mm) slotted hex head screw400 Series All Stainless Steel
Clamping Range13 – 23mm14 – 27mm17 – 32mm21 – 38mm21 – 44mm27 – 51mm33 – 57mm40 – 64mm46 – 70mm59 – 83mm65 – 89mm71 – 95mm78 – 102mm84 – 108mm91 – 114mm48 – 127mm64 – 140mm79 – 152mm92 – 165mm105 – 178mm
Part NoASS08ASS10ASS12ASS16ASS20ASS24ASS28ASS32ASS36ASS44ASS48ASS52ASS56ASS60ASS64ASS72ASS80ASS88ASS96ASS104
OETIKER CLIPS
A Oetiker Clips are designed for use with Rubber, PVC and Plastic Hoses where a strong and reliable clamping solution is required. To clamp, simply crimp the ears down using a Pincing Plier.
Material: Zinc Plated Steel
Clamping Range7 – 9mm9 – 11mm11 – 13mm13 – 15mm15 – 17mm15 – 18mm17 – 20mm19 – 22mm20 – 23mm22 – 25mm23 – 27mm25 – 28mm27 – 31mm31 – 34mm34 – 37mm37 – 40mm40 – 43mm43 – 46mm
Part NoHCOCZ0709HCOCZ0911HCOCZ1113HCOCZ1315HCOCZ1517HCOCZ1518HCOCZ1720HCOCZ1922HCOCZ2023HCOCZ2225HCOCZ2327HCOCZ2528HCOCZ2731HCOCZ3134HCOCZ3437HCOCZ3740HCOCZ4043HCOCZ4346# Also available in Stainless Steel
STAINLESS STEEL PIPE
RETAINING CLIPS
A quality Pipe Retaining Clip for all your Pipe Clamping requirements where maximum corrosion protection is required.
Designed for securing Tubing and Hosing in a wide variety of industrial and commercial applications.
Band Width: 1/2”/12.7mm
Band Material: Stainless Steel Band/Rubber Cushion
Fixing Hole: 1/4”/6.4mm
Sizes Available: 6, 10, 12, 16, 19, 25, 32, 38, 50, 65, 76mm (Tube O.D)
38
TUBING & HOSING
NYLON AIRBRAKE TUBING
Designed and manufactured specifically for use in Truck and Heavy Trailer Air Braking systemsand secondary Air Systems. It can also be used in a wide range of other pneumatic applications.
Manufactured to meet SAE J844 and
DIN 74324 specifications
Coil Size: 100 mtrs
39
TUBING & HOSING
SPIRAL TIE
Sizes Available: 6, 10, 12, 19, 25, 32, 38 & 50mm
Colour: Black (UV Resistant)
Coil Length: 15mtrs
COPPER TUBING
Sizes Available: 1/8, 3/16, 1/4, 5/16, 3/8 & 1/2” O.D
Coil Size: 15mtrs
BUNDY TUBING
Sizes Available: 3/16, 1/4, 5/16 & 3/8 O.D
Coil Size: 8mtrs
and secondary Air Systems. It can also be used in a wide range of other pneumatic applications.
Metric 6mm 8mm 10mm 12mm 15mm 16mm
Black ✓ ✓ ✓ ✓ ✓ ✓
Red ✓ ✓ ✓
Blue ✓ ✓ ✓
Imperial 1/8 5/32 3/16 1/4 5/16 3/8 1/2 5/8 3/4
Black ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Red ✓ ✓ ✓
Blue ✓ ✓ ✓ ✓
Yellow ✓ ✓
Orange ✓ ✓
Green ✓ ✓
40
40
RUBBER FUEL HOSE – SAE 30R7
Sizes Available: 5/16 & 3/8 I.D
Coil Size: 100mtrs or cut to length
HEATER HOSE
Standard black car heater hose for cars and light trucks. EPDM Tube and cover, high strength. Reinforcement meets SAE 20R3.
Sizes Available: 1/2”, 5/8” & ¾” ID
PVC AIRLINE
Excellent flexibility at low temperature. A hose for the transfer of air compressor hose. Blue smooth outer cover with a black inner wall. UV stabilised. Conforms to AS 2554 Class B.
Temperature: 0°C to 60°C
Working Pressure: 230 P.S.I
Size Available: 10MM ID
Coil Size: 100 mtrs or cut to length
TUBING & HOSING
RUBBER AIRBRAKE HOSE
Designed specifically for use in Truck and Heavy Trailer Air Braking systems, and manufactured to meet S.A.E J1402 and D.O.T F.M.V.S. 106 specifications.Use with our 1492 Series Rubber Airbrake Hose Ends for a D.OT approved connection. (see page 23)
Sizes Available: 3/8 & 1/2” O.D
Coil Size: 76.2mtrs
POLYETHYLENE TUBING
Black 6mm 8mm10mm12mm1/45/163/8
Blue6mm8mm10mm12mm
1/45/16
Red6mm8mm10mm12mm
1/45/16
Natural6mm8mm10mm12mm
1/45/163/81/2
COIL LENGTHS AVAILABLE: 25m, 50m & 100m
1/4, 5/16 & 3/18 I.D
41
FIFTH WHEEL SLIDER KITDesigned for use on Fifth Wheels this Kit has almost everything you need to complete the connections.
# 120” Length of 1/4” OD J844 Coiled Airbrake Tube# Brass Swivel 1/4” NPT Ends with Spring Guards# 90° Brass 1/4” NPT Male to Female Pipe Elbow# Frame Mounting Bracket
AIRBRAKING ACCESSORIES
SUZI COILSSuzi Coils are manufactured from 1/2” OD Nylon Airbrake Tubing and are supplied complete with 1/4” NPT male threaded ends and spring guard.
Available in: 3.0M Working Length Standard Tail Red & Blue Pair3.7M Working Length Long Tail Red & Blue Pair
3.7M Suzi Coil to be used where Air Connections are elevated 1 metre above the chassis of Prime Mover and Semi-Trailer.
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
4442
ERGONOMIC WASHDOWN GUN
ERGONOMIC WASHDOWN GUNERGONOMIC DESIGNThe Ergonomic Gun was designed with anatomical considerations in mind. This means it shapes itself in your hand making it comfortable to use for extended periods of time. Constructed with Brass internal components with a shockproof plastic outer, it is built for professionals!!!
BALANCE & WEIGHT DISTRIBUTIONThe Ergonomic Gun offers improved weight distribution to place less strain on the wrist and minimises operator fatigue
TRIGGER GUARDThe moulded Trigger Guard provides protection to the fingers from injury by sharp edges on equipment.
INSTANTANEOUS TRIGGER LOCKThe quick release trigger lock guarantees it can be immediately and easily shut off with just one hand.
REDUCED HEAT TRANSFERThe moulded plastic trigger and sealed gun minimises heat transfer, making the gun more comfortable to use, with no hot metal exposed.
QUALITY WORKMANSHIPMade in Europe by true professionals for professional use!
SWIVEL INLETThe Gun comes standard with a 1/2” BSP swivel inlet for greater ease of use.
RATED PRESSURE24 Bar
MAXIMUM FLOW RATE60L/Min (Pressure Dependant)
MAXIMUM TEMPERATURE90 Degrees Celsius
ERGONOMIC WASHDOWN GUN
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
4244
From Innovation...
...to application
B2025ANAEROBIC RANGE
MEDIUM STRENGTH HIGH STRENGTH
MEDIUM STRENGTH
LOW STREGNTH
MED/HIGH STRENGTH
B515 Flange Sealant is a purple, smooth, thick paste. Easily applied B515 cures once con�ned between the parts to Form-In-Place a tough, �exible gasket. B515 gives an Instant low pressure seal.
65ml Tube
B270 anaerobic adhesive is ideal for locking threads and preventing loosening. Use on all studs up to 1 inch diameter and coarse threaded bolts.
10ml & 50ml Bottles
B510 is a fast set, Form-In-Place Gasket Maker for all types of metal parts, sealing and resisting temperatures up to 200°C.
65ml Tube
B243 adhesive is an oil tolerant version of B242, for use on ‘as received’ parts. It locks threads, prevents loosening & also prevents corrosion by sealing out moisture.
10ml & 50ml Bottles
B290 Wick In Penetrant is a Fast Cure anaerobic securing compound which is very low in viscosity, thus enabling the wicking action to search into the voids in assembled components and cure anaerobically in the absence of air on close �tting metal parts.10m & 50ml Bottles
B222 anaerobic adhesive is used for locking threads and preventing loosening. It seals out moisture to prevent corrosion. B222 is ideal for small screws, circuit board �xings etc.10m & 50ml Bottles
LOW STRENGTH
B222THREADLOCK
Screwlock B243THREADLOCK
Nutlock B270THREADLOCK
Studlock
B290TREADLOCKER
Penetrator
INSTANT GASKET
Gasket Sealant
B515INSTANT GASKET
LOW PRESSURE HIGH PRESSURE
MEDIUM STRENGTH
Pipeseal with PTFE. B577 is ideal for sealing pipes, pipe �ttings and plugs. Providing an instant seal of 10 Bar and a pressure rating of 350 Bar when fully cured.
50ml Tube
B567 is an easy break sealant and locking action product that gives an instant seal to low pressures. Fast �xture times are found on a range of materials such as copper, mild steel and other metals. Cold temperatures will slow the cure but not the instant seal.65ml Tube
B542 Hydraulic Seal is used for all types of hydraulic connections, sealing against typical pressure line ratings up to 400 Bar. Ideal for use on valves and threaded couplings.
50ml Bottles
B542HYDRAULIC SEAL
Lock & Seal
B567PIPE SEAL
Liquid PTFE
PIPE SEAL
Liquid PTFE
LOW PRESSURE
B518 Gasket Sealant is a Red, smooth, thick paste. Easily applied B518 cures con�ned between the parts to Form-In-Place a tough, �exible gasket. B518 gives an Instant low pressure seal.
250ml Syringe
INSTANT GASKET
Gasket SealantGasket Sealant
HIGH STRENGTH
Ideal for retaining bearings, brushes and keyways. Use to bond all cylindrical close �tting parts up to 0.15mm gap, especially where thorough degreasing is not possible.
10ml & 50ml Bottles
B603 Oil Tolerant
RETAINER
B518
HIGH TEMPERATURE
Simple to apply, fast curing, �exible, scratch �lling gasket maker. B574 provides an instant seal of 6 Bar that rises up to 350 Bar when fully cured.
65ml Tube
B574INSTANT GASKET
Gasket Sealant
HIGH PRESSURE
Recommended for use on parts that may need future dismantling. Gap �lls to 0.2mm diametrically.
10ml & 50ml Bottles
B641RETAINER
Bearing Fit
B577 B510
HIGH STREANGTH
B569 Hydraulic Seal is a high strength thixotropic liquid which cures Anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. 10ml & 50ml Bottles
HYDRAULIC SEAL
Lock & SealB569
46
10ml Bottles
10ml Bottles & 50ml Bottles
B2025ANAEROBIC RANGE
MEDIUM STRENGTH HIGH STRENGTH
MEDIUM STRENGTH
LOW STREGNTH
MED/HIGH STRENGTH
B515 Flange Sealant is a purple, smooth, thick paste. Easily applied B515 cures once con�ned between the parts to Form-In-Place a tough, �exible gasket. B515 gives an Instant low pressure seal.
65ml Tube
B270 anaerobic adhesive is ideal for locking threads and preventing loosening. Use on all studs up to 1 inch diameter and coarse threaded bolts.
10ml & 50ml Bottles
B510 is a fast set, Form-In-Place Gasket Maker for all types of metal parts, sealing and resisting temperatures up to 200°C.
65ml Tube
B243 adhesive is an oil tolerant version of B242, for use on ‘as received’ parts. It locks threads, prevents loosening & also prevents corrosion by sealing out moisture.
10ml & 50ml Bottles
B290 Wick In Penetrant is a Fast Cure anaerobic securing compound which is very low in viscosity, thus enabling the wicking action to search into the voids in assembled components and cure anaerobically in the absence of air on close �tting metal parts.10m & 50ml Bottles
B222 anaerobic adhesive is used for locking threads and preventing loosening. It seals out moisture to prevent corrosion. B222 is ideal for small screws, circuit board �xings etc.10m & 50ml Bottles
LOW STRENGTH
B222THREADLOCK
Screwlock B243THREADLOCK
Nutlock B270THREADLOCK
Studlock
B290TREADLOCKER
Penetrator
INSTANT GASKET
Gasket Sealant
B515INSTANT GASKET
LOW PRESSURE HIGH PRESSURE
MEDIUM STRENGTH
Pipeseal with PTFE. B577 is ideal for sealing pipes, pipe �ttings and plugs. Providing an instant seal of 10 Bar and a pressure rating of 350 Bar when fully cured.
50ml Tube
B567 is an easy break sealant and locking action product that gives an instant seal to low pressures. Fast �xture times are found on a range of materials such as copper, mild steel and other metals. Cold temperatures will slow the cure but not the instant seal.65ml Tube
B542 Hydraulic Seal is used for all types of hydraulic connections, sealing against typical pressure line ratings up to 400 Bar. Ideal for use on valves and threaded couplings.
50ml Bottles
B542HYDRAULIC SEAL
Lock & Seal
B567PIPE SEAL
Liquid PTFE
PIPE SEAL
Liquid PTFE
LOW PRESSURE
B518 Gasket Sealant is a Red, smooth, thick paste. Easily applied B518 cures con�ned between the parts to Form-In-Place a tough, �exible gasket. B518 gives an Instant low pressure seal.
250ml Syringe
INSTANT GASKET
Gasket SealantGasket Sealant
HIGH STRENGTH
Ideal for retaining bearings, brushes and keyways. Use to bond all cylindrical close �tting parts up to 0.15mm gap, especially where thorough degreasing is not possible.
10ml & 50ml Bottles
B603 Oil Tolerant
RETAINER
B518
HIGH TEMPERATURE
Simple to apply, fast curing, �exible, scratch �lling gasket maker. B574 provides an instant seal of 6 Bar that rises up to 350 Bar when fully cured.
65ml Tube
B574INSTANT GASKET
Gasket Sealant
HIGH PRESSURE
Recommended for use on parts that may need future dismantling. Gap �lls to 0.2mm diametrically.
10ml & 50ml Bottles
B641RETAINER
Bearing FitB641
B577 B510
HIGH STREANGTH
B569 Hydraulic Seal is a high strength thixotropic liquid which cures Anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. 10ml & 50ml Bottles
HYDRAULIC SEAL
Lock & SealB569
46
46
B2025ANAEROBIC RANGE
MEDIUM STRENGTH HIGH STRENGTH
MEDIUM STRENGTH
LOW STREGNTH
MED/HIGH STRENGTH
B515 Flange Sealant is a purple, smooth, thick paste. Easily applied B515 cures once con�ned between the parts to Form-In-Place a tough, �exible gasket. B515 gives an Instant low pressure seal.
65ml Tube
B270 anaerobic adhesive is ideal for locking threads and preventing loosening. Use on all studs up to 1 inch diameter and coarse threaded bolts.
10ml & 50ml Bottles
B510 is a fast set, Form-In-Place Gasket Maker for all types of metal parts, sealing and resisting temperatures up to 200°C.
65ml Tube
B243 adhesive is an oil tolerant version of B242, for use on ‘as received’ parts. It locks threads, prevents loosening & also prevents corrosion by sealing out moisture.
10ml & 50ml Bottles
B290 Wick In Penetrant is a Fast Cure anaerobic securing compound which is very low in viscosity, thus enabling the wicking action to search into the voids in assembled components and cure anaerobically in the absence of air on close �tting metal parts.10m & 50ml Bottles
B222 anaerobic adhesive is used for locking threads and preventing loosening. It seals out moisture to prevent corrosion. B222 is ideal for small screws, circuit board �xings etc.10m & 50ml Bottles
LOW STRENGTH
B222THREADLOCK
Screwlock B243THREADLOCK
Nutlock B270THREADLOCK
Studlock
B290TREADLOCKER
Penetrator
INSTANT GASKET
Gasket Sealant
B515INSTANT GASKET
LOW PRESSURE HIGH PRESSURE
MEDIUM STRENGTH
Pipeseal with PTFE. B577 is ideal for sealing pipes, pipe �ttings and plugs. Providing an instant seal of 10 Bar and a pressure rating of 350 Bar when fully cured.
50ml Tube
B567 is an easy break sealant and locking action product that gives an instant seal to low pressures. Fast �xture times are found on a range of materials such as copper, mild steel and other metals. Cold temperatures will slow the cure but not the instant seal.65ml Tube
B542 Hydraulic Seal is used for all types of hydraulic connections, sealing against typical pressure line ratings up to 400 Bar. Ideal for use on valves and threaded couplings.
50ml Bottles
B542HYDRAULIC SEAL
Lock & Seal
B567PIPE SEAL
Liquid PTFE
PIPE SEAL
Liquid PTFE
LOW PRESSURE
B518 Gasket Sealant is a Red, smooth, thick paste. Easily applied B518 cures con�ned between the parts to Form-In-Place a tough, �exible gasket. B518 gives an Instant low pressure seal.
250ml Syringe
INSTANT GASKET
Gasket SealantGasket Sealant
HIGH STRENGTH
Ideal for retaining bearings, brushes and keyways. Use to bond all cylindrical close �tting parts up to 0.15mm gap, especially where thorough degreasing is not possible.
10ml & 50ml Bottles
B603 Oil Tolerant
RETAINER
B518
HIGH TEMPERATURE
Simple to apply, fast curing, �exible, scratch �lling gasket maker. B574 provides an instant seal of 6 Bar that rises up to 350 Bar when fully cured.
65ml Tube
B574INSTANT GASKET
Gasket Sealant
HIGH PRESSURE
Recommended for use on parts that may need future dismantling. Gap �lls to 0.2mm diametrically.
10ml & 50ml Bottles
B641RETAINER
Bearing Fit
B577 B510
HIGH STREANGTH
B569 Hydraulic Seal is a high strength thixotropic liquid which cures Anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. 10ml & 50ml Bottles
HYDRAULIC SEAL
Lock & SealB569
46
CYANOACRYLATE RANGE
B401CYANOACRYLATE
Ethyl B406CYANOACRYLATE
LOW VISCOSITY
B401 B406
General purpose adhesive for bonding most materials including metals, plastics, woods, ceramics, rubbers, glass, card and leather.
3g, 10g and 20g
General purpose adhesive for bonding most rubbers, metals and plastics, ‘O’Rings and EPDM in seconds. Can be used with B770 primer for dif�cult plastics and Elastomers.
20g
Ethyl
SEALANT RANGE
HIGH STRENGTH HIGH PERFORMANCE
RTVGP Acetic Cure
SILICONE SEALANTRTVBNC
SILICONE SEALANTSB5299
HIGH TEMP RTV
RTV Acetic Cure Silicone is designed to make any size or shape gasket replacing cork, felt, rubber and asbestos gasket systems.Ideal for sealing and bonding between metal, glass, plastics, concrete, wood and vinyl.Also suitable for insulating and waterproo�ng electrical systems and resists temperatures up to 250 degrees celcius.Availble Colours: Clear, Black, White.
BNC SILICONE is a single component, low modulus, oxime curing silicone sealant/adhesive.Available: Grey, Translucent.
MEDIUM VISCOSITY
HIGH PERFORMANCE
B5299 RTV is a single component, high modulus, acetoxy curing siliconesealant that vulcanises at room temperature to provide a permanently �exible seal and bond. Service temperaturerange: -40°C to 350°C. Colour: Red
RTV Neutral Cure Acetic Cure
B2001PUTTY STICKS
Epoxy Putty B2002PUTTY STICKS
Epoxy Putty B2003PLASTIC EPOXY
Epoxy Stick
EMERGENCY REPAIR GENERAL PURPOSE GENERAL PURPOSEA hand kneadable, speciality epoxy putty that mixes in 1 minute for fast, permanent repairs to most plastic surfaces.The mixed epoxy turns from an aquamarine colour to a “�breglass white” upon curing and will not yellow when exposed to UV light.
A hand kneadable, speciality epoxy putty that mixes in 1 minute for permanent repairs to Aluminium surfaces. The mixed epoxy turns from a silvery colour to “Alloy” upon curing and will not yellow upon exposure to UV light. After �nal cure it can be drilled, tapped, sawed, �led, sanded and painted.
Repairing, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Moulds like clay and may be used to permanently patch dents, scratches, cuts, gouges and holes in all types of repairs to mouldings and injection type shapes.
B2004COPPER EPOXY
Epoxy Stick
GENERAL PURPOSEA hand–mixable, fast–setting, copper–reinforced epoxy putty that quickly repairs pipes, tanks and vessels made of copper, brass, bronze and other non–ferrous metals. After mixing, it forms a polymer compound that is extremely tough and durable and offers exceptional adhesion.
B2006WOOD EPOXY
Epoxy Stick
GENERAL PURPOSEA hand–mixable, fast–setting, epoxy putty specially formulated to repair and rebuild wood quickly and easily. After mixing, it forms a polymer compound that cures to the same density as wood. After 60 minutes the application can be drilled, tapped, sawed, sanded, �led, painted, and stained.
B2007AQUA EPOXY
Epoxy Stick
GENERAL PURPOSEA hand–mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. After mixing, it forms a polymer compound that may be applied underwater (either fresh or salt water) and will bond tenaciously to substrates such as �berglass, concrete, ceramic, glass, metal, wood, and many plastics.
STRUCTURAL RANGE
4747
B206060 SECOND
Epoxy Resin
GENERAL PURPOSEA two-part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide range of surfaces, including steel, aluminium and galvanised iron. It reacts within a minute to give a tough resilient bond.
B2025 Epoxy Resin
GENERAL PURPOSEB2025 is specially designed for a variety of applications and substrates including wet and dry bonding of Flexible PVC, Masonry, Fibreglass, Wood, Metal, Ceramics, Plastics and Glass. It is also suitable for use on composite type materials and can be used for bumper and side panel materials.
B2012 5 MINUTE EPOXY
Epoxy Resin
GENERAL PURPOSEB2012 is a two part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide range of surfaces, including steel, aluminium and galvanised iron. It reacts within �ve minutes to give a tough resilient bond.
UNDERWATER
B3294PLASTIC WELD
Acrylic
HIGH STRENGTHA toughened structural adhesive formulated for bonding dissimilar substrates. The �nal adhesive bond is designed to be load bearing and resistant to weathering, humidity and wide temperature variations.
MAINTENANCE PRODUCTS
B772ANTI-SEIZE
Copper
HIGH TEMPERATURE
B772 Copper Antiseize is specially formulated for protection against seizure even in extreme service conditions. Copper Antiseize by its unique combination of properties, ensures rapid and easy assembly of thread parts.
B7767SPRAY CAN
Silicone Lubricant
GENERAL PURPOSE
B7767 Silicone Lubricant is ideal for more dif�cult release in the rubber, plastic and �breglass industries. It helps prevent sticking to the moulds and cavities and also to the processing and fabrication equipment. It is also suitable as a lubricant for use on slipways and a polish/cleaner, particularly on plastic surfaces.
B771ANTI-SEIZE
Nickel
HIGH TEMPERATUREB771 with by its unique combination of properties, ensures rapid and easy assembly of thread parts; reduces torque, prevents seizing and galling; gives quick and easy breakout of threads, gaskets and packing even after long exposures to high temperature or corrosive conditions.
Lube
STRUCTURAL RANGE
B7778SPRAY CAN
Cut & Tap Fluid
HIGH TEMPERATURECut & Tap Fluid is a blend of oils which sprays to give a frothy, oily, relatively clear liquid. It may be used in all cutting tools and provides improved surface �nish, reducing heat and friction. It contains additives which prevent pitting, galling and metal seizures. It can be used on all metals including stainless steel and titanium.
4848
MISCELLANEOUS
MISCELLANEOUS
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
25 DRAWER CABINET• Red powder Coated
• Plastic drawers with dividers
Unit dimensions: H: 330mm W:395mm D:160mmPart No: EGC25
Part No: AFAG4
Part No: TGITC
Part No: EGCTG1210
Part No: EGCT1210
WHITE CEELON PTFE THREADSEAL TAPEFast clean leak proof sealing on all threaded joints.
• Lubricates
• Vibration resistant
• Non-seizing
• 12mm x 10mtrs
YELLOW GAS THREADSEAL TAPEFast clean leak proof sealing on all threaded joints.
• AGA approved
• 12mm x 10mtrs
MINI NYLON TUBE CUTTERFor use on nylon tubing up to 16mm (5/8)
AIR DUSTER GUNFor cleaning machinery and equipment.
• 100mm nozzle
• 1/4” pipe thread inlet
CABLE TIES
Length100mm150mm200mm200mm250mm300mm300mm300mm380mm370mm450mm550mm
Part No CT10025BCT15035BCT20035BCT20047BCT25047BCT30035BCT30047BCT30075BCT38047BCT37075BCT45075BCT55090B
Width2.5mm3.5mm3.5mm4.7mm4.7mm3.5mm4.7mm7.5mm4.7mm7.5mm7.5mm9.0mm
Pack Qty100 100 100 100 100 100 100 100 100 100 50 50
•Black•UV Stabilized
5050
CONVERSION TABLES
PRESSUREPSI kPa BAR100 689 6.89200 1379 13.79300 2068 20.68400 2758 27.58500 3447 34.47600 4137 41.37700 4826 48.26800 5516 55.16900 6205 62.051000 6895 68.951100 7584 75.841200 8274 82.741300 8963 89.631400 9653 96.531500 10342 103.4
TORQUEftlb Nm Nm ftlb10 14 10 720 27 20 1530 41 30 2240 54 40 3050 68 50 3760 81 60 4470 95 70 5280 108 80 5990 122 90 66
100 136 100 74110 149 110 81120 163 120 89130 176 130 96140 190 140 103150 203 150 111160 217 160 118170 230 170 125180 244 180 133190 257 190 140200 271 200 148
1 ftlb = 1.36 Nm 1 Nm = 0.738 ftlb
THREADS USED ON BRASS FITTINGSTube Size 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4
45° Flare5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 3/4-16 7/8-14 1”1/16-14UNF UNF UNF UNF UNF UNF UNF UN
Inverted Flare
5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 3/4-18 7/8-18 1”1/16-14UN UNF UNS UNF UNF UNS UNS UN
Compression5/16-24 3/8-24 7/16-24 1/2-24 9/16-24 11/16-20 13/16-18 1”-18UNF UNF UNS UNS UNEF UN UN UNS
5151
PROFILES
5252
PRODUCT BRANDS
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature
and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.
GAS TIGHT-GCA – AGA Approved Ball Valves
TAC – Push to Connect Airbrake Fittings D.O.T
API – Nickel Plated Pneumatic Push In Air Fittingsand Silencers
FAIRVIEW – NTA Airbrake Fittings D.O.T, NPT Pipe Fittings, Rubber Airbrake Hose Ends D.O.T, Road Ranger Fittings, Rubber Airbrake Hose J1402, Steel Bundy Tubing, Copper Tubing, Stainless Steel Pipe Retaining Clips
ARO – Air Fittings, Couplers & Adaptors
BREEZE – Stainless Steel Hose Clips & Clamps
FLOMAX – Ball Valves, Lever Handle Ball Valves, Tee Handle Ball Valves, Miniature Ball Valves & Gate Valves
ESDAN PLASTICS – Nylon Airbrake Tubing, Nylon 12 Tubing, Suzi Coils & PVC Hoses, Spiral Tie
POWAFLEX – Rubber & PVC Hoses
ARO
CDC – Pneumatic One-Touch Push In Air Fittings, Check Valves and Banjo Flow Controllers
BONDLOC – Adhesives & Sealants
CONECTA – Industrial Brass Fittings, Flare Fittings, Compression Fittings, Pipe Fittings, Airline Fittings, Needle Valves & Drain Cocks
FLUIDFIT – Fittings for Potable Water,Drink Dispensers and Beverages