product catalogue · 2016. 3. 10. · sprinklers 34 timers & water control 39 hose hangers,...

Product CatalogueNovember 2015

Neta’s garden watering products have been developed with the Australian gardener in mind and are guaranteed for Australian conditions. As a commitment of quality, Neta has introduced the No Break Guarantee. This guarantee is our pledge that if our products do not perform to expectations within the guarantee period stated on the packaging, Neta will happily replace the product.

Neta No Break Guarantees are clearly identified on each product pack and range anywhere from 2 through to 30 years - depending on the individual product. Neta’s plastic UV stabilised fittings come with a five year guarantee. Brass hose fittings and brass nozzels come with a 20 year guarantee and the Neta hose range guarantees varies between 6 to 30 years. However, as guarantees differ from product to product, please refer to the original packaging for confirmation. Please also see About our Warrantees page www.netagarden.com.au for full terms and conditions.

The Neta No Break Guarantee

RGD Corporation - Ph 08 9358 1466 -Email [email protected]

Garden WateringGarden Hose 6Special Purpose Hose 11Clear Vinyl Tube 13Garden Hose Fittings 15Nozzles, Guns & Wands 28Sprinklers 34Timers & Water Control 39Hose Hangers, Reels & Trolleys 41Rain Gauges 46

IrrigationIrrigation Pipe 50Irrigation Pipe Fittings 56Irrigation Planner 80Integral Dripline Fittings 81Micro Irrigation Fittings 85Lawn Irrigation 106

Recycled Water 114

Water SupplyRural PE Pipe Compression Fittings 118Metric PE Pipe Compression Fittings 125Metric Tapping Saddles 133Nylon Threaded Fittings 136Polypropylene Threaded Fittings 141Threaded Risers 145Valves 150

Azud FiltrationAzud Modular 100 Series Filters 154

Contents


5

Garden WateringGarden Hose ................................................................. 6

Special Purpose Hose .................................................. 11

Clear Vinyl Tube .......................................................... 13

Garden Hose Fittings ................................................... 15

Nozzles, Guns & Wands ................................................28

Sprinklers ....................................................................34

Timers & Water Control ................................................39

Hose Hangers, Reels & Trolleys ...................................41

Rain Gauges ...............................................................46


6

Neta’s range of hoses is designed specifically for the Australian garden.

• 6 Year Guarantee• Braided Double Layer Construction• 3/6 Kink Rating• Lightweight Durability• Available in Fitted & Unfitted• Plastic Fittings• UV Stable • Manufactured to Australian

Standards

• 10 Year Guarantee• Braided Double Layer Construction • Durable Outer Skin• Medium 4/6 Kink Rating• Medium Durability• Premium Plastic Fittings• UV Stable• Manufactured to Australian

Standards

• 15 Year Guarantee• Braided Double Layer Construction• Easy Grip Texture & Anti-Scuff • Medium 4/6 Kink Rating• Medium Durability• Premium Plastic Fittings• UV Stable• Manufactured to Australian

Standards

Jade Garden Hose

Emerald Garden Hose

Diamond Garden Hose

Black Gold Garden Hose • 25 Year Guarantee• Braided & Reinforced Construction• Tough Durable Outer Skin• Ultra 6/6 Kink Rating• Heavy Durability• Quality Brass Fittings• UV Stable• Manufactured to Australian

Standards

• 30 Year Guarantee• Knitted Anti-Torsion Construction• Six Layers• Lead-free• Ultra 6/6 Kink Rating• Premium Durability • Made in Italy• Quality Brass Fittings• UV Stable• Manufactured to Australian

Standards

Platinum KAT Garden Hose

Make sure your customers are ready for every season with the Neta garden hose range.

Softer more flexible garden hosesAustralian designed and tested to exceed Australian StandardsCaters for a broad range of watering requirementsUV stable & high kink resistance

Features & Benefits

Includes quality brass fittings

Includes quality brass fittings

Tips• When you get your new hose home, lay it out in the

sun for about half an hour to straighten it out.

• To ensure a long and trouble free life, store your hose in the shade and on a hose reel.

• When choosing a hose, consider whether it will reach the areas you need to water. The longer the hose,

the more likely it is to tangle.


7

Wall thickness - quality indicator

Colour - choices available

Braiding - neat and even

Layer adhesion - no blistering

Outer layer - UV resistant

Garden HoseAn Iconic Hose. Since the 1940’s Neta has been synonymous with high quality garden products. Neta hoses are manufactured and tested to an exacting standard; AS2620.1 There is a Neta hose to suit each and every gardener and their garden. Engineered for improved softness, flexibility and kink resistance, all are ultra lightweight, making them a pleasure to use.

What makes a Neta hose stronger and more durable? This starts right at the point of manufacture with the use of high quality raw materials. Its basic structure, which comprises an inner tube, a woven casing and an outer tube, also determines its quality. The thicker the tube, the stronger the hose will be and the more it will resist kinking. Strong polyester yarn, neatly and evenly braided, reinforces your Neta hose, allowing it to withstand high water pressure. The outer layer has high UV resistance to withstand the harsh Australian sun.

Jade - 6 yr guarantee Diamond - 15 yr guaranteeEmerald - 10 yr guarantee Black Gold - 25 yr guarantee


8

A strong, reinforced and braided, translucent garden hose with a quality finish. Made from UV stabilised materials for long life and tested to Australian standards. Quality guaranteed for 6 years, identified by 1 orange stripe, and with a ‘high’ kink resistance of 3 star kink rating. Lightweight garden hose designed for Australian gardens. Available as bulk 100m coil stretch wrapped (unfitted). Fitted hoses are supplied ‘Garden Tap-Ready’ assembled with quality Neta plastic fittings.

A strong, reinforced and braided, solid garden hose with a quality finish. Made from UV stabilised materials for long life and tested to Australian Standards. Quality guaranteed for 10 years, identified by 2 orange stripes, and with a ‘high’ kink resistance of 4 star kink rating. Designed with improved durability for regular use in Australian gardens. All hoses are supplied ‘Garden Tap-Ready’ assembled with quality Neta plastic fittings.

A strong, reinforced and braided, translucent garden hose with a quality finish. Made from UV stabilised materials for long life and tested to Australian standards. Quality guaranteed for 15 years, identified by 2 orange stripes, and with a ‘high’ kink resistance of 4 star kink rating. Designed with improved durability for regular use in Australian gardens. All hoses are supplied ‘Garden Tap-Ready’ assembled with quality Neta plastic fittings.

Garden Hose

Jade Garden Hose

Diamond Garden Hose

12mm diameter

Emerald Garden Hose

12mm x 15m Fitted GH/E05F12015 466464 5 5

12mm x 30m Fitted GH/E05F12030 466570 3 3

12mm x 15m Unfitted GH/E05012015 467065 5 5



PRODUCT SIZE PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE

12mm x 15m Fitted GH/E10F12015 466488 5 5

12mm x 30m Fitted GH/E10F12030 466594 3 3

12mm x 15m Fitted GH/E15F12015 466495 5 5

12mm x 30m Fitted GH/E15F12030 466600 3 3

3 1 4 2 1 2 4 6 6 4 6 49

3 1 4 2 1 2 4 6 6 5 7 09

3 1 4 2 1 2 4 6 7 0 6 59

3 1 4 2 1 2 4 6 7 0 7 29

3 1 4 2 1 2 4 6 6 4 2 69

3 1 4 2 1 2 4 6 6 4 8 89

3 1 4 2 1 2 4 6 6 5 9 49

3 1 4 2 1 2 4 6 6 4 9 59

3 1 4 2 1 2 4 6 6 6 0 09


9

Garden Hose

Black Gold Garden Hose

A strong, reinforced and braided, solid garden hose with a quality finish. Made from UV stabilised materials for long life and tested to Australian standards. Quality guaranteed for 25 years, identified by 3 red stripes, and with an ‘ultra’ kink resistance of 6 star kink rating. Designed to optimum quality for heavy duty use in Australian gardens. All hoses are supplied ‘Garden Tap-Ready’ assembled with quality Neta brass fittings.

Knitted anti-torsion six layer garden hose, made from lead-free materials.Made in Italy from UV stabilised materials for long life and tested to Australian standards.Quality guaranteed for 30 years, with an ‘ultra’ kink resistance of 6 star kink rating.Designed ergonomically for heavy duty use in Australian gardens.All hoses are supplied ‘Garden Tap-Ready’ with quality Neta brass fittings.

12mm diameter

Platinum KAT Garden Hose


12mm x 15m Fitted GH/U25F12015 466518 5 5

12mm x 30m Fitted GH/U25F12030 466624 3 3

12mm x 15m Fitted GH/U30F12K15 466303 5 5

12mm x 30m Fitted GH/U30F12K30 466310 3 3

3 1 4 2 1 2 4 6 6 5 1 89

3 1 4 2 1 2 4 6 6 6 2 49

3 1 4 2 1 2 4 6 6 3 0 39

3 1 4 2 1 2 4 6 6 3 1 09

Platinum KAT | 30 Year Guarantee Neta’s new Platinum KAT hose is the latest and most innovative garden hose to hit the market.The Platinum KAT features six layers of lead free premium materials, featuring both a braided and knitted layer for extra strength and flexibility. The Platinum KAT is perfect for the modern Australian gardener with a sophisticated platinum grey matte finish, which emits style and allows for extra smooth handling.

The Platinum KAT is confidently backed by Neta’s 30 year No Break Guarantee, designed to be durable and tough and created using UV stabilised materials to withstand harsh weather conditions, and accompanied by the highest six star kink resistance rating.

1. The inner layer is moulded using high quality white PVC.2. Second layer of high quality flexible black PVC.3. Reinforced braided polyester layer.

123

456

4. Middle layer of high quality flexible black PVC.5. Reinforced knitted polyester layer.6. Soft touch metallised transparent grey layer with soft finish.


10

A strong, reinforced and braided, translucent garden hose with a quality finish. Made from UV stabilised materials for long life and tested to Australian standards. Quality guaranteed for 6 years, identified by 1 orange stripe, and with a ‘high’ kink resistance of 3 star kink rating. Lightweight garden hose designed for Australian gardens. Available as bulk 100m coil stretch wrapped (unfitted). Fitted hoses are supplied ‘Garden Tap-Ready’ assembled with quality Neta ‘Hi-Flo’ plastic fittings.

A strong reinforced and braided translucent garden hose with twice the flow of the 18mm Garden Hose. Made from UV stabilised materials for long life. Quality guaranteed for 5 years. Made to conform with industry standard specifications with dimensions and flexibility, while offering a maximum operating pressure of 700kPa. All coils supplied stretchwrapped (unfitted).

Garden Hose

Jade Garden Hose

Mega Flow Hose

18mm diameter

25mm diameter

18mm x 18m Fitted GH/E05F18018 466532 3 3

18mm x 30m Fitted GH/E05F18030 466648 2 2





25mm x 20m Unfitted GH/N05025020 465436 1 1

25mm x 50m Unfitted GH/N05025050 466273 1 1

3 1 4 2 1 2 4 6 6 5 3 29

3 1 4 2 1 2 4 6 6 6 4 89

3 1 4 2 1 2 4 6 7 0 8 99

3 1 4 2 1 2 4 6 7 0 9 69

3 1 4 2 1 2 4 6 7 0 4 19

3 1 4 2 1 2 4 6 5 4 3 69

3 1 4 2 1 2 4 6 6 2 7 39


11

A heavy duty reinforced hose with excellent flexibility and high abrasion resistance, ideal for hand-held fire fighting. Supplied with brass click-on fiittings and a fire-fighting spray nozzle. Fire Hose is made from UV stabilised materials for long life and is quality guaranteed for 5 years.The hose complies with Australian standard AS/NZS1221 with a minimum flow rate of 0.45 litres/second at 150kPa. The fire hose also has a maximum operating pressure of 1000kPa and a burst pressure of 4000kPa.

A strong, reinforced and braided, translucent hose, ideal for caravans, boats, or anywhere that requires safe transfer of drinking water. Made from UV stabilised materials. Quality guaranteed for 6 years. Tested to comply with Australian Standard AS/NZS4020 to ensure non-toxic, safer and cleaner hose. - No plastic taste- Made with food grade materials and suitable for

use with drinking water- Multiple applications- Durable constructionPressure rated at PN12.5 to suit temporary connection to mains water supply. Compatible with standard 12mm Garden Hose fittings,. The hose comes wrapped in plastic to ensure it is clean when sold. Drinking water hose is designed for use with cold water. We do not recommend using this hose with water exceeding 38ºC.

Fire Hose

Special Purpose Hose

A durable 8mm braided hose with Multi-Pattern Spray Gun. Ideal for small balconies, courtyards or even the boat.Fittings suitable for both ¾” and 1” outlet taps. Individually shrinkwrapped.

Stowaway Compact Hose

Special Purpose

Drinking Water Hose

20mm x 20m Fitted GH/NFHB20020 465771 1 1

20mm x 36m Fitted GH/NFHB20036 465658 1 1


12mm x 10m GH/NDW012010 465382 7 7

12mm x 20m GH/NDW012020 465399 5 5

8mm x 10m - RR Box GH/N010CHR01 465887 6 6

3 1 4 2 1 2 4 6 5 7 7 19

3 1 4 2 1 2 4 6 5 6 5 89

3 1 4 2 1 2 4 6 5 3 8 29

3 1 4 2 1 2 4 6 5 3 9 99

3 1 4 2 1 2 4 6 5 8 8 79


12

A unique ‘flat’ profile hose with twin stripes to clearly show which side is up. The hole pattern is designed to ensure even spray coverage. Sprinkler hose supplied fitted with stake to hold the end in place, and with an end cap to flush the hose or for joining two sprinkler hoses together. The fittings are fully compatible with standard 13mm micro irrigation fittings. Also available with reel for fast, tangle-free, convenient and compact storage. Easy to lay out and wind up. No more tangles or twists. The first real innovation in sprinkler hose in 20 years. Made from UV stabilised materials. Quality guaranteed for 3 years.

Made from recycled rubber, this hose is fitted with a pressure reducer that reduces water pressure to provide a uniform distribution along the full length of the hose. Water droplets sweat through its walls, slowly watering the surrounding area.Quality guaranteed for 5 years. Discharge at 175kPa is 2.0 Lpm

Traditional unreinforced flexible PVC hose for distributing recycled water. Purple colour safely identifies use with reclaimed and recycled water. Made from UV stabilised material for long life. Suits micro irrigation barbed fittings. Maximum Operating Pressure 300kPa

Special Purpose Hose

Sprinkler Hose

Weepa Hose

Sullage Hose

Special Purpose

7.5m Fitted GH/NSH0F0075 465337 10 10

15m Fitted GH/NSH0F0150 465344 10 10

7.5m with Reel Fitted - RR Box GH/NSH0FR075 465450 5 5

15m with Reel Fitted - RR Box GH/NSH0FR150 465467 5 5

15m with Pressure Reducer -RR Box GH/NSOPHR015 465610 5 5



19mm x 20m GH/SH0019020 460400 1 5

25mm x 20m GH/SH0025020 460370 1 1

3 1 4 2 1 2 4 6 5 3 3 79

3 1 4 2 1 2 4 6 5 3 4 49

3 1 4 2 1 2 4 6 5 4 5 09

3 1 4 2 1 2 4 6 5 4 6 79

3 1 4 2 1 2 4 6 5 6 1 09

3 1 4 2 1 2 4 6 5 6 2 79

3 1 4 2 1 2 4 6 0 4 0 09

3 1 4 2 1 2 4 6 0 3 7 09


13

Clear Vinyl Tube Bulk - for cutting to length in store

Clear Vinyl Tube

General purpose, transparent tube, made from food grade material. Suitable for a wide range of applications including:- low pressure delivery- syphon and drainage lines- builders water level- cable or chain protection- fish tank tube- water level sight tube- protective coversBulk spools and coils provide a simple and convenient system for retailing “cut to length” CVT. Handy metre marks and the tube diameter are printed every metre along the full length of the tube. The metre mark counts down to show how much tube is left on the spool.

Special Purpose

Spool 3mm x 150m CV/0030SP150 337931 1 -

Spool 4mm x 150m CV/0040SP150 337948 1 -

Spool 5mm x 100m CV/0050SP100 337955 1 -

Spool 6mm x 65m CV/0060SP065 337962 1 -

Spool 8mm x 45m CV/0080SP045 337979 1 -

Spool 10mm x 35m CV/0100SP035 337986 1 -

Spool 12.5mm x 35m CV/0125SP035 337993 1 -

Spool 16mm x 25m CV/0160SP025 338006 1 -

Spool 19mm x 18m CV/0190SP018 338013 1 -

Coil 25mm x 25m CV/0250CL025 337856 1 -

Coil 32mm x 25m CV/0320CL025 337863 1 -

Coil 38mm x 25m CV/0380CL025 337870 1 -

PACK PRODUCT SIZE

PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE

3 1 4 2 1 2 3 3 7 9 3 19

3 1 4 2 1 2 3 3 7 9 4 89

3 1 4 2 1 2 3 3 7 9 5 59

3 1 4 2 1 2 3 3 7 9 6 29

3 1 4 2 1 2 3 3 7 9 7 99

3 1 4 2 1 2 3 3 7 9 8 69

3 1 4 2 1 2 3 3 7 9 9 39

3 1 4 2 1 2 3 3 8 0 0 69

3 1 4 2 1 2 3 3 8 0 1 39

3 1 4 2 1 2 3 3 7 8 5 69

3 1 4 2 1 2 3 3 7 8 6 39

3 1 4 2 1 2 3 3 7 8 7 09


14

Clear Vinyl Tube Labelled - for scanning of coils at checkout

Short-length, barcode labelled coils ready for checkout scanning - no in-store service required. Convenient lengths cover most applications - use what’s required for the job and save the rest for a “rainy day”. These popular sizes are labelled and ready to sell.

Clear Vinyl Tube

Special Purpose

Labelled 3mm x 10m CV/0030LB010 337887 6 6




Labelled 12.5mm x 5m CV/0125LB005 337924 4 4



PACK PRODUCT SIZE


3 1 4 2 1 2 3 3 7 8 8 79

3 1 4 2 1 2 3 3 7 8 9 49

3 1 4 2 1 2 3 3 7 9 0 09

3 1 4 2 1 2 3 3 7 9 1 79

3 1 4 2 1 2 3 3 7 9 2 49

3 1 4 2 1 2 3 3 8 0 2 09

3 1 4 2 1 2 3 3 8 0 3 79


15

Plastic

Garden Hose FittingsNeta plastic garden hose fittings are guaranteed for 5 years and are designed to suit Australian conditions. Available in 12mm or 18mm and manufactured using UV stabilised plastic, there is a Neta hose fitting for every watering application. Customers can add a Neta unfitted hose to complete a watering solution that will endure for years, or purchase a fitted hose with existing Neta hose fittings.

Available in adaptors, connectors, watering sets,joiners and couplers5 year No Break GuaranteeAvailable in 12mm or 18mm click-on range fittingsMade from a high gloss UV stabilised materialScrews onto standard ¾” and 1˝ tap outletsLarge easy grip winged nutFeatures Neta’s ‘Long Claw’ grip ring

Features & Benefits

Neta Long Claw Acetal grip ring high pressure anti-leak sealing systemThe Long Claw is Neta’s secret weapon against leaks. It’s separate to the rest of the fitting, allowing it to really dig its claws into the hose to create a connection that won’t break or leak.

When combined with a Neta hose it gives the ultimate connection and protection against leaks - all part of our anti-leak sealing system. The Neta Long Claw grip ring is available in both plastic and brass hose connectors and joiners.

Long Claw Grip Ring Assembly

WingsLarge easy-gripwing nut

SealsQuality anti-leak washer and o-ring

Click-onLarge nylon grip teeth inside

Hose TailExtra long hose tail

Long ClawLong Claw for extra gripMade from strong acetal

NutEasy grip nut


16 16

Garden Hose Fittings

UNIVERSAL TAP ADAPTORS 12MMFits 12mm click-on hose connectors and screws onto ¾” or 1” tap outlets. With easy-grip wings.

DOUBLE END CONNECTOR 12MMFits 12mm hose and connects to click-on tap adaptors, couplers, sprays, nozzles and guns.

HOSE CONNECTOR WITH STOP 12MMFits 12mm hose and connects to 12mm click-on tap adaptors, couplers, sprays, nozzles and guns.

Plastic Hose Fittings 12mm

HOSE CONNECTOR 12MMFits 12mm hose and connects to click-on tap adaptors, couplers,sprays, nozzles and guns.

1/Labelled - RR Box MH/RPLHC0012 145543 25 200

1/Blister Pack - RR Box MH/RPRUTA012 145840 6 60

1/Labelled - RR Box MH/RPLHCS012 145598 20 160

1/Labelled - RR Box MH/RPLTA7512 145666 40 480

1/Labelled - RR Box MH/RPLHCDE12 145574 10 120

1/Labelled - RR Box MH/RPLHC1218 145567 20 160

1/Labelled - RR Box MH/RPLHCFC12 145581 15 180

PACK TYPE PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE

1/Labelled - RR Box MH/RPLUTA012 145673 20 240

¾” TAP ADAPTORS 12MMFits ¾ ” tap outlet and fits onto 12mm click-on hose connectors. Features easy grip wings.

1/Blister Pack - RR Box MH/RPRTA7512 145833 6 60

1/Blister Pack - RR Box MH/RPRHC0012 145697 6 60

¾” FBSP HOSE CONNECTOR 12MMFits 12mm hose and connects to click-on tap adaptors, couplers, sprays, nozzles and guns.

1/Blister Pack - RR Box MH/RPRHCS012 145727 6 60

EZ HOSE CONNECTOR 12/18MMFits 18mm hose and connects to 12mm click-on tap adaptors, couplers, sprays, nozzles and guns.


3 1 4 2 1 2 1 4 5 8 4 09

3 1 4 2 1 2 1 4 5 6 7 39

3 1 4 2 1 2 1 4 5 8 3 39

3 1 4 2 1 2 1 4 5 6 6 69

3 1 4 2 1 2 1 4 5 6 9 79

3 1 4 2 1 2 1 4 5 5 4 39

3 1 4 2 1 2 1 4 5 5 7 49

3 1 4 2 1 2 1 4 5 5 8 19

3 1 4 2 1 2 1 4 5 7 2 79

3 1 4 2 1 2 1 4 5 5 9 89

3 1 4 2 1 2 1 4 5 7 1 09

3 1 4 2 1 2 1 4 5 5 6 79


17

1/Labelled - RR Box MH/RPLHJR012 145628 20 240

3-END COUPLER 12MMFits 12mm click-on hose and suits 12mm click-on hose connectors. Branch one hose into two to run two sprinklers at once.

2-END COUPLERS 12MMFits 12mm click-on hose connectors. Joins two hoses together for a longer hose.

1/Blister Pack - RR Box MH/RPRHEC312 145758 6 60

1/Labelled - RR Box MH/RPLHEC212 145604 40 480

HOSE JOINERS 12MMFits 12mm hose to join two hoses or repair a split hose.

HOSE FITTINGS SET 12MMComprises two 12mm click-on hose connectors and universal tap adaptor (¾” and 1” tap outlets). Suits 12mm hose.

1/Blister Pack - RR Box MH/RPRHFS012 145765 6 60


Plastic Hose Fittings 12mm

WATERING NOZZLE SET 12MMComprises two 12mm click-on hose connectors, universal tap adaptor (¾” and 1” tap outlets) and nozzle. Suits 12mm hose.

1/Blister Pack - RR Box MH/RPRWGS012 145864 6 36

1/Blister Pack - RR Box MH/RPRWHS012 145871 6 60

WATERING GUN SET 12MMComprises two 12mm click-on hose connectors, universal tap adaptor (¾” and 1” tap outlets) and Neta 7-pattern spray gun. Suits 12mm hose.

1/Blister Pack - RR Box MH/RPRHJR012 145789 6 60



¾” SPRAY ADAPTOR 12MMScrews into sprinklers, sprays and guns making them suitable for 12mm click-on hose connectors.

1/Labelled - RR Box MH/RPLSA7512 145642 50 600

1/Blister Pack - RR Box MH/RPRSA7512 145819 6 60

3 1 4 2 1 2 1 4 5 8 6 49

3 1 4 2 1 2 1 4 5 8 7 19

3 1 4 2 1 2 1 4 5 7 6 59

3 1 4 2 1 2 1 4 5 7 8 99

3 1 4 2 1 2 1 4 5 6 2 89

3 1 4 2 1 2 1 4 5 7 3 49

3 1 4 2 1 2 1 4 5 6 0 49

3 1 4 2 1 2 1 4 5 7 5 89

3 1 4 2 1 2 1 4 5 8 1 99

3 1 4 2 1 2 1 4 5 6 4 29


18

Hi-Flo Plastic Hose Fittings 18mm

HOSE CONNECTOR 18MMFits to 18mm hose and connects to click-on tap adaptors, couplers, sprays, nozzles and guns.

HOSE JOINER 18MMFits 18mm hose to join two hoses or repair a split hose.

WATERING SET 18MMComprises two 18mm click-on hose connectors, universal tap adaptor (¾” and 1” tap outlets) and nozzle. Suits 18mm hose.

HOSE FITTINGS SET 18MMComprises two 18mm click-on hose connectors and universal tap adaptor (¾” and 1” tap outlets). Suits 18mm hose.

1/Blister Pack - RR Box MH/RPRWHS018 145888 6 48

1/Blister Pack - RR Box MH/RPRHFS018 145772 6 60



UNIVERSAL TAP ADAPTOR 18MMFits to 18mm click-on hose connectors and screws onto ¾” or 1” tap outlets.

1/Labelled - RR Box MH/RPLUTA018 145680 20 240

1/Blister Pack - RR Box MH/RPRUTA018 145857 6 60


Labelled - RR Box MH/RPLHC0018 145550 20 160

1/Labelled - RR Box MH/RPLHJR018 145635 20 240

1/Blister Pack - RR Box MH/RPRHJR018 145796 6 60

3 1 4 2 1 2 1 4 5 8 5 79

3 1 4 2 1 2 1 4 5 6 8 09

3 1 4 2 1 2 1 4 5 7 0 39

3 1 4 2 1 2 1 4 5 5 5 09

3 1 4 2 1 2 1 4 5 8 8 89

3 1 4 2 1 2 1 4 5 7 7 29

3 1 4 2 1 2 1 4 5 7 9 69

3 1 4 2 1 2 1 4 5 6 3 59


19

2-END REDUCING COUPLER 18 X 12MMFits 12mm and 18mm click-on hose connectors. Joins a 18mm hose to a 12mm hose.

¾” SPRAY ADAPTOR 18MMScrews into sprinklers, sprays and guns making them suitable for 18mm click-on hose connectors.

2-END COUPLER 18MMFits 18mm click-on hose connectors. Joins two hoses together for a longer hose.

1/Blister Pack - RR Box MH/RPRHER218 145802 6 60

1/Blister Pack - RR Box MH/RPRSA7518 145826 6 60



Hi-Flo Plastic Hose Fittings 18mm


1/Labelled - RR Box MH/RPLHEC218 145611 30 360

1/Labelled - RR Box MH/RPLSA7518 145659 40 480

3 1 4 2 1 2 1 4 5 7 4 19

3 1 4 2 1 2 1 4 5 6 1 19

3 1 4 2 1 2 1 4 5 8 0 29

3 1 4 2 1 2 1 4 5 8 2 69

3 1 4 2 1 2 1 4 5 6 5 99


20

O’RINGS 12MMReplacement washers for tap fittings with click-on ends.

¼” REPLACEMENT WASHERSReplacement washers for ¼” spray adaptors.

5/Blister Pack - RR Box MH/RGA000NL0 145444 12 96

4/Blister Pack - RR Box MH/RGA0000W1 145413 12 96



5/Blister Pack - RR Box MH/RGA00NL00 145451 12 96

O’RINGS 18MMReplacement washers for tap adaptors.

¾” REPLACEMENT WASHERSReplacement washers for tap adaptors and tap fittings.

1” REPLACEMENT WASHERSReplacement washers for tap adaptors and tap fittings.

Fitting Accessories



Bulk MF/OR0012100 012135 100 -

3 1 4 2 1 2 1 4 5 4 4 49

3 1 4 2 1 2 0 1 2 1 3 59

3 1 4 2 1 2 1 4 5 4 5 19

3 1 4 2 1 2 1 4 5 4 1 39

3 1 4 2 1 2 1 4 5 4 2 09

3 1 4 2 1 2 1 4 5 4 3 79


21

Brass

Garden Hose FittingsNeta brass garden hose fittings are guaranteed for 20 years and are designed to suit Australian conditions. Available in 12mm or 18mm and manufactured using solid brass there is a Neta hose fitting for every watering application. Customers can choose from the Neta range of brass fitted hoses or retrofit brass fittings onto an existing garden hose.

Available in adaptors, connectors, hosefitting sets, joiners and couplers20 year No Break GuaranteeAvailable in 12mm or 18mm Available in click-on, screw-on and barbed tail range fittingsMade from solid brassScrews onto standard ¾” and 1˝ tap outletsFeatures Neta’s ‘Long Claw’ grip ringFeatures Neta ‘X-Stream’ lock ringFeatures Neta’s ‘Multi-Fit’ hose clamp

Features & Benefits

Neta Long Claw Acetal grip ring highpressure anti-leak sealing systemThe Long Claw is Neta’s secret weapon against leaks. It’s separate to the rest of the fitting, allowing it to really dig its claws into the hose to create a connection that won’t break or leak.

When combined with a Neta hose it gives the ultimate connection and protection against leaks - all part of our anti-leak sealing system. The Neta Long Claw grip ring is available in both plastic and brass hose connectors and joiners.

Long Claw Grip Ring Assembly

WasherQuality anti-leak washer and O-Ring

Click-on3 grip clips inside

Hose TailExtra long hose tail

Long ClawLong Claw for extra grip. Made from strong acetal

NutEasy grip nut

Chrome Fittings Chromed brass fittings have the same features and benefits as solid brass fittings, are tarnish resistant and maintain shine for a more contemporary look.

The Neta X-Stream Lock Ring Extreme pressure anti-leak sealing system. It locks into place and is ideal for extreme pressure applications.

The Neta Multi-FitHose Clamp Adjusts to fit various hose thicknesses to form part of the anti-leak sealing system.


22

UNIVERSAL TAP ADAPTOR 12MMFits 12mm click-on hose connectors. Screws onto ¾” and 1” tap outlets.

UNIVERSAL SWIVEL TAP ADAPTOR 12MMFits 12mm click-on hose connectors. Screws onto ¾” and 1” tap outlets.Outlet swivels to avoid kinking.

12MM/15MM PLAIN TAP ADAPTORConnects 12mm click-on hose connectors to plain 15mm non-threaded taps.

SCREW HOSE CONNECTOR 12MMFits 12mm hose and connects to click on tap adaptors, couplers, sprays, nozzles and guns.Features the Neta X-Stream lock ring.


Brass Click-On Hose Fittings 12mm

1/Blister - RR Box MH/RBC0NL10B 145147 6 48





1/Blister - RR Box MH/RBC00NL44 145055 6 48

1/Blister - RR Box MH/RBCNL44EZ 145222 6 48


EZ HOSE CONNECTOR 12MMFits 12mm hose and connects to click-on tap adaptors, couplers, sprays, nozzles and guns. Features the Neta Long Claw grip ring.


¾” TAP ADAPTOR 12MMFits 12mm click-on hose connectors. Screws onto . ¾” tap outlets.

1” TAP ADAPTOR 12MMFits 12mm click-on hose connectors. Screws onto 1” tap outlets.

EZ HOSE CONNECTOR WITH STOP 12MMFits 12mm hose and connects to click-on tap adaptors, couplers, sprays, nozzles and guns. Features a water stop for convenience. Features the Neta Long Claw grip ring.

3 1 4 2 1 2 1 4 5 1 4 79

3 1 4 2 1 2 1 4 5 0 7 99

3 1 4 2 1 2 1 4 5 1 1 69

3 1 4 2 1 2 1 4 5 1 0 99

3 1 4 2 1 2 1 4 5 1 7 89

3 1 4 2 1 2 1 4 5 0 5 59

3 1 4 2 1 2 1 4 5 2 2 29

3 1 4 2 1 2 1 4 5 2 3 99


23


EZ HOSE CONNECTOR 12/18MM Fits 18mm hose and connects to 12mm click-on tap adaptors, couplers, sprays, nozzles and guns. Features the Neta Long Claw grip ring.


¾” EZ HOSE KIT 12MMFits 12mm hose and connects to 12mm click-on tap adaptors, couplers, sprays, nozzles and guns. Features the Neta Long Claw grip ring.

EZ UNI HOSE FITTINGS SET 12MMComprises two brass EZ hose connectors and universal tap adaptor. Features the Neta Long Claw grip ring.

Brass Click-On Hose Fittings 12mm

1/Blister - RR Box MH/RBNLS41EZ 145260 6 24



2-END COUPLER 12MMAllows two hoses to be joined by means of click-on connectors.

¼” SPRAY ADAPTOR 12MMScrews into sprinklers, making them suitable for 12mm click-on hose connectors.

1/Blister - RR Box MH/RBCONL03B 145093 6 48




EZ UNI HOSE FITTINGS SET CHROME 12MMComprises two chromed brass EZ hose connectors and universal tap adaptor. Features the Neta Long Claw grip ring.


¾” SPRAY ADAPTOR 12MMScrews into sprinklers, sprays or guns making them suitable for 12mm click-on hose connectors.

11/16” (AMERICAN) SPRAY ADAPTOR 12MMScrews into sprinklers, sprays or guns making them suitable for 12mm click-on hose connectors.

3 1 4 2 1 2 1 4 5 2 4 69

3 1 4 2 1 2 1 4 5 2 6 09

3 1 4 2 1 2 1 4 5 2 7 79

3 1 4 2 1 2 1 4 5 2 8 49

3 1 4 2 1 2 1 4 5 0 9 39

3 1 4 2 1 2 1 4 5 0 8 69

3 1 4 2 1 2 1 4 5 1 5 49

3 1 4 2 1 2 1 4 5 1 2 39


24

¾” TAP ADAPTOR 12MM BARB & CLAMPFits 12mm hose and screws onto threaded taps. Hose clamp is included. Features the Neta Multi-Fit hose clamp.

HOSE CONNECTOR 12MM BARB & CLAMP

Fits 12mm hose and clicks onto tap adaptors, spray adaptors, couplers, sprays, nozzles and guns. Hose clamp is included. Features the Neta Multi-Fit hose clamp.


Brass Barbed-Tail Hose Fittings 12mm

1/Blister - RR Box MH/RBB00RA14 145017 6 48

1/Blister - RR Box MH/RBB0RNL44 145031 6 48

SCREW HOSE JOINER 12MMFits 12mm hose to join two hoses or repair split hose.Features the Neta X-Stream lock ring.

EZ SCREW HOSE JOINER 12MMFits 12mm hose to join two hoses or repair split hose. Features the Neta Long Claw grip ring.

12MM/15MM PLAIN TAP ADAPTORFits 12mm hose and connects to plain non-threaded taps.

¾” SCREW DIRECTOR 12MMFits 12mm hose and screws into sprinklers, sprays or guns.

1/Blister - RR Box MH/RBS00A234 145376 6 48



1/Blister - RR Box MH/RBS0A34EZ 145390 6 48

¾” SCREW TAP ADAPTOR 12MMFits 12mm hose and screws onto ¾” or 1” tap outlets.



Brass Screw Hose Fittings 12mm


1” SCREW TAP ADAPTOR 12MMFits 12mm hose and screws onto ¾” or 1” tap outlets.

3 1 4 2 1 2 1 4 5 3 0 79

3 1 4 2 1 2 1 4 5 3 2 19

3 1 4 2 1 2 1 4 5 3 1 49

3 1 4 2 1 2 1 4 5 3 7 69

3 1 4 2 1 2 1 4 5 3 9 09

3 1 4 2 1 2 1 4 5 3 6 99

3 1 4 2 1 2 1 4 5 0 1 79

3 1 4 2 1 2 1 4 5 0 3 19


25

UNIVERSAL TAP ADAPTOR 18MMFits 18mm click-on hose connectors and screws onto ¾” or 1” tap outlets.

UNIVERSAL SWIVEL TAP ADAPTOR 18MMFits 18mm click-on hose connectors and screws onto ¾” or 1” tap outlets. Outlet swivels to avoid kinking.

Hi-Flo Brass Click-On Hose Fittings 18mm

SCREW HOSE CONNECTOR 18MMFits 18mm hose and connects to 18mm click-on tap adaptors, couplers, sprays, nozzles and guns. Features the Neta X-Stream lock ring.

EZ UNI HOSE FITTINGS SET 18MMComprises two EZ hose connectors and a universal tap adaptor. Features the Neta Long Claw grip ring.

2 END COUPLER 18MMAllows two hoses to be joined by 18mm click-on connectors.

¾” (20MM) SPRAY ADAPTOR 18MMScrews into sprinklers, sprays or guns making them suitable for 18mm click-on hose connectors.



1/Blister - RR Box MH/RBCNL035B 145208 6 48






1/Blister - RR Box MH/RBC00NL55 145062 6 48



¾” TAP ADAPTOR 18MMFits 18mm click-on hose connectors and screws onto ¾” tap outlets.

1” TAP ADAPTOR 18MMFits 18mm click-on hose connectors and screws onto 1” tap outlets.

EZ HOSE CONNECTOR 18MMFits 18mm hose and connects to 18mm click-on tap adaptors, couplers, sprays, nozzles and guns. Features the Neta X-Stream lock ring.

3 1 4 2 1 2 1 4 5 1 6 19

3 1 4 2 1 2 1 4 5 1 9 29

3 1 4 2 1 2 1 4 5 2 1 59

3 1 4 2 1 2 1 4 5 1 3 09

3 1 4 2 1 2 1 4 5 0 6 29

3 1 4 2 1 2 1 4 5 2 5 39

3 1 4 2 1 2 1 4 5 2 9 19

3 1 4 2 1 2 1 4 5 2 0 89

3 1 4 2 1 2 1 4 5 1 8 59


26

¾” SCREW TAP ADAPTOR 18MMFits 18mm hose and screws onto ¾” or 1” tap outlets.

SCREW HOSE JOINER 18MMFits 18mm hose to join two hoses or repair split hose. Features the Neta X-Stream lock ring.

EZ HOSE JOINER 18MMFits 18mm hose to join two hoses or repair split hose. Features the Neta Long Claw grip ring.

¾” SCREW DIRECTOR 18MMFits 18mm hose and screws into sprinklers, sprays or guns.

1” TAP ADAPTOR 18MM BARB & CLAMPFits 18mm hose. Screws onto 1” tap outlets. Hose clamp is included. Features the Neta Multi-Fit hose clamp.

HOSE CONNECTOR 18MM BARB & CLAMPFits 18mm hose and connects to tap adaptors, couplers, sprays, nozzles and guns. Hose clamp is included. Features the Neta Multi-Fit hose clamp.

Hi-Flo Brass Screw-On Hose Fittings 18mm

Hi-Flo Brass Barbed-Tail Hose Fittings 18mm

1/Blister - RR Box MH/RBS00B145 145383 6 48


1/Blister - RR Box MH/RBS0B35EZ 145406 6 36


1/Blister - RR Box MH/RBB00RB15 145024 6 48

1/Blister - RR Box MH/RBB0RNL55 145048 6 48




1” SCREW TAP ADAPTOR 18MMFits 18mm hose and screws onto 1” tap outlets.

3 1 4 2 1 2 1 4 5 3 8 39

3 1 4 2 1 2 1 4 5 3 3 89

3 1 4 2 1 2 1 4 5 3 4 59

3 1 4 2 1 2 1 4 5 4 0 69

3 1 4 2 1 2 1 4 5 3 5 29

3 1 4 2 1 2 1 4 5 0 2 49

3 1 4 2 1 2 1 4 5 0 4 89


27

BRASS TWIN TAPS UNIVERSAL CLICK-ON 12MM

Converts one ¾” or 1” tap outlet into two outlets for 12mm click-on connectors. Easy to operate –– large double-sided handles on taps, wings on inlet tap fitting.

METAL UNIVERSAL TWIN TAP 12MM

Converts one ¾” or 1” tap outlet into two outlets for ¾” screw-on fittings.

PLASTIC UNIVERSAL TWIN TAP 12MM

Converts one ¾” or 1” tap outlet into two outlets for 12mm connectors.

UNIVERSAL 4-WAY TAP

Converts one ¾” or 1” tap outlet into four outlets for ¾” screw-on fittings. Supplied with two ¾” tap adaptors for click-on connections.

Multi Outlet Taps - Universal

Converts one ¾” or 1” tap outlet into two outlets for ¾” screw-on fittings. Easy to operate –– large double-sided handles on taps, wings on inlet tap fitting.

BRASS 2-WAY TAP UNIVERSAL SCREW-ON

Converts one ¾” or 1” tap outlet into two outlets for ¾” screw-on fittings. Suitable for two tap timers. Easy to operate –– large double-sided handles on taps, wings on inlet tap fitting.


Converts one ¾” or 1” tap outlet into two outlets for ¾” screw-on fittings and one outlet for 12mm click-on connector. Easy to operate –– large double-sided handles on taps, wings on inlet tap fitting.


Converts one ¾” or 1” tap outlet into three outlets for ¾” screw-on fittings and one outlet for 12mm click-on connector. Easy to operate –– large double-sided handles on taps, wings on inlet tap fitting.


1/Blister Pack MH/TPBUNIC2P 013828 10 40

1/Blister Pack MH/TPBUNIT2P 013835 10 40


1/Blister Pack MH/TPBUNIS2P 013842 10 40



1/Blister MH/TPM075T2P 014825 5 90

1/Blister MH/TPP075C2P 014818 5 90

1/Blister MH/TPPUNIT4P 013873 5 20

3 1 4 2 1 2 0 1 3 8 2 89

3 1 4 2 1 2 0 1 3 8 3 59

3 1 4 2 1 2 0 1 3 8 4 29

3 1 4 2 1 2 0 1 3 8 5 99

3 1 4 2 1 2 0 1 3 8 6 69

3 1 4 2 1 2 0 1 4 8 2 59

3 1 4 2 1 2 0 1 4 8 1 89

3 1 4 2 1 2 0 1 3 8 7 39


28

Garden

Nozzles, Guns & WandsNeta’s Retail Ready range of nozzles and guns offers customers the choice of UV stabilised plastic, metal and solid brass to cater for all considerations such as lifestyle, specific home and garden needs, water efficiency, comfort, style and colour. Our watering guns are available in front and back trigger styles with a variety of spray patterns to suit all applications. Neta’s No Break Guarantees offer customers reassurance of a quality product and range from 5 to 20 years.

Solid Brass Nozzles

Neta’s range of 12mm & 18mm solid brass jumbo or jet nozzles are designed to be durable and are water efficient. By simply rotating the adjustable easy-grip hand held nozzle, the water jet can be adjusted from ‘off’ through to a super strong jet.

Neta Brass nozzles are covered by a 20 year ‘No Break Guarantee’ and complement Neta’s range of garden hoses. Neta’s solid brass nozzles are the perfect solution for customers who are looking for a durable garden hose nozzle.

Front and Back Trigger Guns

Made from solid metal or UV stablilised plastic, Neta’s range of front and back trigger guns are tough and highly water efficient. They have a water saving trigger action and auto shut off. Neta’s guns are available as either a multi-purpose nozzle or adjustable nozzle. For extra comfort, the Neta range has been created with the addition of an ergonomic non-slip cushion grip, making them less strenuous to use.

Neta’s guns are covered by a 5 year ‘No Break Guarantee’ making them a confident choice for customers.

Water efficient trigger actionAvailable in 12mm and 18mm (Hi-Flo)Available in click-on, screw-on and barbed tailGuns available in front or back trigger gripBrass covered by 20 year No Break GuaranteeMetal covered by 5 year No Break GuaranteePlastic covered by 5 year No Break Guarantee

Features & Benefits


29

ADJUSTABLE NOZZLE 12MM CLICK-ONPlastic nozzle connects to 12mm click-on fittings. Adjusting the barrel varies the spray pattern from a strong jet to a fine mist.

HI-FLO ADJUSTABLE NOZZLE 18MM CLICK-ONPlastic nozzle connects to 18mm click-on fittings. Adjusting the barrel varies the spray pattern from a strong jet to a fine mist.

Plastic Nozzles

1/Blister - RR Box MH/RNPCAN012 145529 6 60

1/Blister - RR Box MH/RNPCAN018 145536 6 60

Nozzles, Guns & Wands

6-PATTERN GUN 12MM CLICK-ONDurable entry level plastic multi-function gun. Choose from 6 different spray patterns. Connects to 12mm click-on fittings.

1/Labelled - RR Box MH/SPP012SG6 141439 10 40

JET GUN 12MM CLICK-ONDurable entry level plastic trigger gun suitable for a variety of applications.Maximum Operating Pressure 600kPa.

1/Labelled - RR Box MH/ZSPWDGO12 013590 20 80

Plastic Back Trigger Guns


ADJUSTABLE JET GUN 12MM CLICK-ON

High gloss plastic gun with smooth action nozzle and water-saving trigger. Adjust spray from a fine mist to a jet stream. Connects to 12mm click-on fittings.

ADJUSTABLE SPRAY GUN 12MM CLICK-ON

High gloss plastic gun with smooth action multi-pattern dial and water saving trigger. Adjust spray from shower to cone to jet. Connects to 12mm click-on fittings.

Plastic Front Trigger Guns

Tiecard MH/SP0AJG12P 141132 10 60

Tiecard MH/SP0AMP12P 141149 10 60

3 1 4 2 1 2 1 4 5 5 2 99

3 1 4 2 1 2 1 4 5 5 3 69

3 1 4 2 1 2 1 4 1 4 3 99

3 1 4 2 1 2 0 1 3 5 9 09

3 1 4 2 1 2 1 4 1 1 4 99

3 1 4 2 1 2 1 4 1 1 3 29


30

ADJUSTABLE SPRAY GUN 12MM CLICK-ONAdjusts from a fine mist to a jet stream. Watersaving trigger action with positive shut-off. Non-slip cushioned hand grip.

PLATINUM ADJUSTABLE SPRAY GUN 12MM CLICK-ONDesigner gun with high flow fitted with a brass spray adaptor. Adjustable flow control and water-saving trigger.

Metal Back Trigger Guns

Metal Front Trigger Guns

1/Tiecard - RR Box MH/SP00SG200 014542 6 6

1/Tiecard - RR Box MH/SP00SG500 015792 6 6

9-PATTERN SPRAY GUN 12MM CLICK-ONA choice of nine different spray settings. Water-saving trigger action with positive shut-off. Non-slip cushioned hand grip.

1/Tiecard - RR Box MH/SP00MFG10 015105 5 5

ELITE JET GUN 12MM CLICK-ONTop of the range solid metal jet gun. Adjustable from ‘OFF’ to a fine mist to a jet stream. Finished with an ergonomic handle for extra comfort.

ELITE 9-PATTERN SPRAY GUN 12MM CLICK-ONElite 9 pattern spray gun, useful for all applications. Made of solid metal and finished with a soft rubber grip. Multi-purpose spray head with 9 different spray patterns.

1/Tiecard - RR Box MH/SP0FTSG10 141231 6 48

1/Tiecard - RR Box MH/SP0FTMG10 141248 6 48

ELITE FAN GUN 12MM CLICK-ONDurable and tough, solid metal fan spray gun, perfect for gentle watering of seedlings and delicate flowers. Ergonomically designed and fitted with flow control for varying strengths of fan spray.

1/Tiecard - RR Box MH/SP0FTFS10 141224 6 48



3 1 4 2 1 2 0 1 4 5 4 29

3 1 4 2 1 2 0 1 5 7 9 29

3 1 4 2 1 2 0 1 5 1 0 59

3 1 4 2 1 2 1 4 1 2 3 19

3 1 4 2 1 2 1 4 1 2 4 89

3 1 4 2 1 2 1 4 1 2 2 49


31

HEAVY DUTY SPRAY GUN 12MM CLICK-ONRobust gun suitable for washdown or firefighting. Lever action on/off. Adjusts from spray to stream. Maximum operating pressure 1200kPa.

Metal Heavy Duty Guns

1/Labelled - RR Box MH/ZSPOUG100 016058 6 6


1/Labelled - RR Box MH/ZSPOUG200 015457 4 4

JET NOZZLE 12MM CLICK-ONSolid brass nozzle producing a powerful jet of water. Clicks onto 12mm hose connectors.

JUMBO NOZZLE 12MM CLICK-ONSolid brass, easy-grip hand-held nozzle with extra water flow and adjustable spray. Adjusts from a fine mist to a straight jet of water.

Brass Nozzles

1/Blister Pack - RR Box MH/RNB00NLJ6 145475 6 48

1/Blister Pack - RR Box MH/RNB0NLS47 145482 6 48

1/Blister - RR Box MH/RNB0NLS57 145499 6 48

1/Blister - RR Box MH/RNB0ST400 145505 6 48


HEAVY DUTY SPRAY GUN 18MM CLICK-ONRobust gun suitable for washdown or firefighting. Lever action on/off. Adjusts from spray to stream. Full size 18mm gun for increased flow. Maximum operating pressure 1200kPa.

JUMBO NOZZLE 18MM CLICK-ONSolid brass, easy-grip hand-held nozzle with extra water flow and adjustable spray. Adjusts from a fine mist to a straight jet of water.

¾” JUMBO NOZZLE SCREW-ONSolid brass, easy-grip hand-held nozzle with extra water flow and adjustable spray. Adjusts from a fine mist to a straight jet of water.

METAL FIRE HOSE NOZZLE 18MM CLICK-ON

Adjusts from a fan pattern to a jet stream. Rugged construction. For use with Neta 20mm fire hose. When fitted to a Neta fire hose the hose and nozzle complies with Australian Standard AS/NZS 1221 with a minimum flow rate of 0.45 litres/second at 150kPa.

Metal Nozzles

Labelled MH/ZSPFHN018 016232 5 25


3 1 4 2 1 2 0 1 6 0 5 89

3 1 4 2 1 2 0 1 5 4 5 79

3 1 4 2 1 2 1 4 5 4 7 59

3 1 4 2 1 2 1 4 5 4 8 29

3 1 4 2 1 2 1 4 5 4 9 99

3 1 4 2 1 2 1 4 5 5 0 59

3 1 4 2 1 2 0 1 6 2 3 29


32

9-PATTERN WAND - EASY REACH 12MM CLICK-ON

Choose from 9 different spray patterns, from a fine mist, to a flood, to a jet stream and many more. Fitted with a non-slip rubber grip and trigger lock for easy and continuous watering.

Trigger Wands



Tiecard MH/SP0FTMW05 141354 6 24

9-PATTERN WAND - LONG REACH 12MM CLICK-ON

Choose from 9 different spray patterns, from a fine mist, to a flood, to a jet stream and many more. Fitted with a non-slip rubber grip and trigger lock for easy and continuous watering. Extra long arm that makes it easy to water those hard to reach spots.

Tiecard MH/SP0FTMW10 141255 6 24

SHOWER WAND - EASY REACH 12MM CLICK-ON

Solid metal shower wand, with flow control for varying strengths in shower spray. Water saving with auto shut off when not in use, perfect for gentle watering.

Tiecard MH/SP00SHW05 141392 6 24

3 1 4 2 1 2 1 4 1 3 5 49

3 1 4 2 1 2 1 4 1 2 5 59

3 1 4 2 1 2 1 4 1 3 9 29

SHOWER WAND - LONG REACH 12MM CLICK-ON

Solid metal shower wand, with flow control for varying strengths in shower spray. Water saving with auto shut off when not in use, perfect for gentle watering. Extra long arm that makes it easy to water those hard to reach spots.

Tiecard MH/SP00SHW10 141408 6 243 1 4 2 1 2 1 4 1 4 0 89


33

Trigger Wands



SOFT SPRAY ALUMINIUM WAND - LONG REACH 12MM CLICK-ON

Soft spray wand made from aluminium making it lightweight and easy to use. Water saving with auto-shut off and flow control and fitted with an ergonomic soft rubber grip. Long arm and gentle shower spray is ideal for watering hanging baskets or low flower beds.

Tiecard MH/SP00SSW10 141262 6 24

GUTTER WAND - LONG REACH 12MM CLICK-ON

Keep gutters clean - ideal for homes with rainwater tanks. Gutter cleaning head swivels to direct the sweeping jet into any gutter. Also ideal to clean under 4WD vehicles. Extends to 1.6m. Supplied with nozzle and soft spray attachment. Use the soft spray head for normal garden watering.

Blister Pack MH/SP0FTGW10 141361 6 24

3 1 4 2 1 2 1 4 1 2 6 29

3 1 4 2 1 2 1 4 1 3 6 19


34

Neta offers a variety of options for sprinkler purchasers:

Metal or plastic A contemporary range of colours to suit any garden Built-in or separate base Base style – wheels, spike or high legs Diverse range of coverage areas Pattern – round, fan, adjustable round, rectangular

or adjustable rectangular Adjustable pattern versus a fixed pattern

Check out the pattern selection guide below for easy selection of garden sprinklers.

Neta has an extensive range of high performance sprinklers to suit many different applications. Neta uses UV stabilised plastics and tough, durable metals to ensure a long product life and the ability to withstand the harsh Australian conditions. There is a Neta sprinkler for every garden application, all of which give gardeners a uniform coverage when watering.

Sprinklers


35

½” BSP FEMALE STRATUS BUTTERFLY SPRINKLER HEAD Fast-rotating head provides excellent water distribution and no dry shadows. Covers circle of up to 11m diameter. ½” BSP female inlet thread.Discharge at 175kPa is 16Lpm.

Sprinkler Heads

1/Blister Pack - RR BOX MH/SERB00SS6 145901 5 40

Sprinklers

½” BSP MALE PULSER IMPULSE SPRINKLER HEAD Brass impact head with ½” BSP male inlet thread and full or part circle adjustment. Covers circle of up to 24m diameter.Discharge at 175kPa is 11Lpm.

1/Blister Pack - RR Box MH/SERB00SRB 145895 5 30

PLATINUM FOUNTAIN SPRINKLER 12MM CLICK-ONGentle fountain spray that covers a circle of up to 9.5m diameter. Fitted with brass 12mm click-on spray adaptor.Discharge at 175kPa is 17Lpm.

Fountain Sprinklers

1/Blister Pack - RR Box MH/SSRBS5205 145994 5 30

FOUNTAIN SPRINKLER 12MM CLICK-ONGentle fountain spray that covers a circle of up to 9.5m diameter. Supplied with plastic 12mm click-on spray adaptor.Discharge at 175kPa is 17Lpm.

1/Blister Pack - RR Box MH/SSRB8202A 145987 5 30


FANJET SPIKE 180º SPRINKLER 12MM CLICK-ONPopular and economical half-circle sprays. Spray coverage up to 2.6m radius.Connects to 12mm click-on fittings.Discharge at 175kPa is 11Lpm.

1/Blister Pack - RR Box MH/SS0NLS92B 145970 6 48

Sprinklers on Spikes

3 1 4 2 1 2 1 4 5 9 0 19

3 1 4 2 1 2 1 4 5 8 9 59

3 1 4 2 1 2 1 4 5 9 9 49

3 1 4 2 1 2 1 4 5 9 8 79

3 1 4 2 1 2 1 4 5 9 7 09


36

PLASTIC UV STABILISED 12MM CLICK-ON

Provides even coverage of a rectangular area. Gear-drive operation with individual side adjustment. Vary the width by closing off up to 6 of the 16 nozzles. Covers approximately 12 x 11m. Connects to 12mm click-on fittings.Discharge at 175kPa is 13Lpm.

16 Jet Oscillating Sprinkler

Sprinklers

SOLID METAL 12MM CLICK-ON

Adjustable to suit individual landscapes. 16 brass spray nozzles cover approximately 12 x 11m. Connects to 12mm click-on fittings.Quality guaranteed for 5 years. Discharge at 175kPa is 13Lpm.

8 PATTERN SPRINKLER 12MM CLICK-ON

8-pattern selections to suit any watering requirements. Select patterns by rotation of sprinkler insert. Connects to 12mm click-on fittings.Discharge at 175kPa is 15Lpm.

Plastic Sprinklers

TRIPLE ARM SPRINKLER 12MM CLICK-ON

Rotating triple arm with adjustable arms for coverage control. Whirling action for uniform water coverage.Covers a circle of up to 10.4m diameter.Discharge at 175kPa is 10Lpm.


Tie Card MH/SE08PS12P 014917 10 40

Tie Card MH/SE0TAS010 141316 10 40

Box MH/SS00OSC10 141323 1 6

Box MH/SE00OSC10 141279 1 6

3 1 4 2 1 2 0 1 4 9 1 79

3 1 4 2 1 2 1 4 1 3 1 69

3 1 4 2 1 2 1 4 1 3 2 39

3 1 4 2 1 2 1 4 1 2 7 99


37

TRIPLE ARM SPRINKLER 12MM CLICK-ON

Rotating triple arm on a plastic skid base with moulded click-on connection. Covers a circle of up to 12m diameter.Discharge at 175kPa is 11Lpm.

Sprinklers on Bases

Sprinklers

STRATUS BUTTERFLY SPRINKLER 12MM CLICK-ON

Fast rotating head provides excellent water distribution without dry shadows. Covers circle of up to 11m diameter.Discharge at 175kPa is 16Lpm.

IMPULSE SPRINKLER ON WHEEL BASE 12MM CLICK-ON

Durable construction with a brass impact head and rustproof materials used throughout.Full or part-circle spray adjustments.Full circle coverage of up to 15.5m diameter.Discharge at 175kPa is 11Lpm.

PLATINUM IMPACT SPRINKLER ON STEP SPIKE 12MM CLICK-ON

Durable, all-metal sprinkler features full or part-circle spray adjustments and easy-to-use metal step spike –– ideal for hard soil. Covers circle of up to 26m diameter.Discharge at 175kPa is 11Lpm.


Box MH/SE00SS402 014467 1 4

Box MH/SS0SB6200 014580 1 4

Box MH/SS0SMI010 141330 1 10

Tiecard MH/SS0SRB500 015822 1 12

360° SPRINKLER ON SPIKE - PLASTIC

Fixed full circle sprinkler with plastic click-on fitting. Covers circle of up to 7.5m diameter.Connects to 12mm click-on fittings.Discharge at 175kPa is 12Lpm.

1/Blister Pack MH/SE0SFS12P 014924 5 5

3 1 4 2 1 2 0 1 4 4 6 79

3 1 4 2 1 2 0 1 4 5 8 09

3 1 4 2 1 2 1 4 1 3 3 09

3 1 4 2 1 2 0 1 5 8 2 29

3 1 4 2 1 2 0 1 4 9 2 49


38

A unique ‘flat’ profile hose with twin stripes to clearly show which side is up. The hole pattern is designed to ensure even spray coverage. Sprinkler hose supplied fitted with stake to hold the end in place, and with an end cap to flush the hose or for joining two sprinkler hoses together. The fittings are fully compatible with standard 13mm micro irrigation fittings. Also available with reel for fast, tangle-free, convenient and compact storage. Easy to lay out and wind up. No more tangles or twists. The first real innovation in sprinkler hose in 20 years. Made from UV stabilised materials. Quality guaranteed for 3 years.

Sprinkler Hose

Sprinklers

EXTENDABLE TRIPOD BASE - SUITS 12MM HOSE

Durable construction with metal legs and quality brass fittings. Features heavy duty plastic ground stakes for securing into place.0.9m adjustable stand.Ideal for large gardens and lawns.Attach any sprinkler head using a ½” BSP male thread.Suitable for 12mm garden hose.

Bases

DEEP WATERING KIT

Conserve water by applying water directly to the root zone where it is most needed. Bury beside the tree or shrub when being planted.Supplied with grate to prevent blockage. Tube can be cut to length.

Deep Watering

Made from recycled rubber, this hose is fitted with a pressure reducer that reduces water pressure to provide a uniform distribution along the full length of the hose. Water droplets sweat through its walls, slowly watering the surrounding area.Quality guaranteed for 5 years. Discharge at 175kPa is 2.0 Lpm

Weepa Hose

15m with Pressure Reducer - RR Box GH/NSOPHR015 465610 5 5



Box MH/SE0ETP010 141347 1 10

2/Header Card & Bag MH/GADWK6506 015112 1 10

7.5m Fitted GH/NSH0F0075 465337 10 10

15m Fitted GH/NSH0F0150 465344 10 10

7.5m with Reel Fitted - RR Box GH/NSH0FR075 465450 5 5

15m with Reel Fitted - RR Box GH/NSH0FR150 465467 5 5

3 1 4 2 1 2 4 6 5 6 1 09

3 1 4 2 1 2 4 6 5 6 2 79

3 1 4 2 1 2 4 6 5 3 3 79

3 1 4 2 1 2 4 6 5 3 4 49

3 1 4 2 1 2 4 6 5 4 5 09

3 1 4 2 1 2 4 6 5 4 6 79

3 1 4 2 1 2 1 4 1 3 4 79

3 1 4 2 1 2 0 1 5 1 1 29


Neta’s range of tap timers designed to save time and money.Timers help to manage the amount of water used in the garden. Set a timer to deliver the correct amount of water at the best time of day. Just set and forget.

Features ergonomic, non-slip dial made of thermo plastic rubber (TPR). Set to water for up to 2 hours with the option of manual override function. Fits ¾” and 1” tap outlets. Suits 12mm click-on hose.

Easy to read LCD screen with simple to use buttons and timer dial. Features 12 pre-set watering times with manual on/off. Fits ¾” & 1” tap outlets. Suits 12mm click-on hose.

Operate two timers from your garden tap. Features 12 pre-set watering functions with manual on/off.Easy to read LCD screen with simple to use buttons and timer dial. Fits ¾” & 1” tap outlets. Suits 12mm click-on hose.

Features ergonomic, non-slip dial made of thermo plastic rubber (TPR). Easy watering of two areas at once for up to 2 hours with the option of manual override. Fits ¾” and 1” tap outlets. Suits 12mm click-on hose

The ideal kit with manifold for watering up to 10 pot plants. Easy to program with manual override. Clips onto a container of water. No tap required. Battery powered with low water and low battery warning beeper. LCD screen display shows programmed settings.

Mechanical Tap TimersMechanical tap timers allow gardeners to make sure the tap will turn off within 2 hours, to avoid overwatering and use of water outside allocated times. Simply turn the knob to the number of minutes of watering required and the built in timer will turn the tap off when complete. No batteries required.

2 hour soft grip tap timer

2 hour soft grip twin tap timer

Electronic Tap TimersElectronic tap timers have the added advantage of being able to set an automatic start time. Ideal for the busy gardener, watering times can be pre-set and left to automatically water when desired.

Both the manual and electronic tap timers have a bypass function that allows normal watering at any time.

Easy dial one zone tap timer

Easy dial two zone tap timer

Pot plant watering kit


40

2 HOUR SOFT GRIP TAP TIMER 12MM CLICK-ONFeatures ergonomic, non-slip dial made of thermo plastic rubber (TPR). Set to water for up to 2 hours with the option of manual override function.

Fits ¾” and 1” tap outlets. Suits 12mm click-on. * Max Operating Pressure = 600kPa

EASY DIAL ONE ZONE TAP TIMER 12MM CLICK-ONEasy to read LCD screen with simple to use buttons and timer dial. Features 12 pre-set watering times with manual on/off.Fits ¾” & 1” tap outlets. Suits 12mm click-on.

EASY DIAL TWO ZONE TAP TIMER 12MM CLICK-ONOperate two timers from your garden tap. Features 12 pre-set watering functions with manual on/off.Easy to read LCD screen with simple to use buttons and timer dial.Fits ¾” & 1” tap outlets. Suits 12mm click-on.

Mechanical Tap Timers

Electronic Tap Timers

2 HOUR SOFT GRIP TWIN TAP TIMER 12MM CLICK-ONFeatures ergonomic, non-slip dial made of thermo plastic rubber (TPR). Easy watering of two areas at once for up to 2 hours with the option of manual override.

Fits ¾” and 1” tap outlets. Suits 12mm click-on.

Timers & Water Control

ELECTRONIC POT PLANT WATERING KIT

The ideal kit with manifold for watering up to 10 pot plants. Easy to program with manual override. Clips onto a container of water. No tap required. Battery powered with low water and low battery warning beeper. LCD screen display shows programmed settings.

Kits


Blister Pack MH/TSGST0012 141187 5 20

Blister Pack MH/TSGTT0012 141194 5 20

1/Blister Pack MH/TEDST0012 141200 1 10

1/Blister Pack MH/TEDTT0012 141217 1 8

1/Box MR/KPPE00000 004994 1 10

3 1 4 2 1 2 1 4 1 1 8 79

3 1 4 2 1 2 1 4 1 1 9 49

3 1 4 2 1 2 1 4 1 2 0 09

3 1 4 2 1 2 1 4 1 2 1 79

3 1 4 2 1 2 0 0 4 9 9 49

* Max Operating Pressure = 600kPa



Tap TimersIntended for cold water use only.Do not use with water exceeding 38°C


41

Hose HangersHose hangers are the most basic storage system. They require a bit more effort than a reel, but are an excellent option for the budget-conscious home owner. Neta offers a range of hose hanger colours from the more traditional heritage green to the modern brushed aluminium.

Aluminium hose hangers can also be used for hanging ladders, tools or bicycles. Neta also has a range of plastic hose hangers that incorporate storage for sprinklers and guns.

Hose Reels and TrolleysHose reels and trolleys are the ultimate storage device. They are easy to use and keep the hose twist-free which prevents kinking. Neta’s 12mm hose reels are made from light-weight, corrosion-free aluminium and UV stabilised plastics with the heavy duty hose reels made from corrosion resistant powder coated steel and stainless steel. It is best to mount a hose reel on the wall because it holds the reel still while reeling the hose in and out.

Hose trolleys allow for the movement of hose anywhere in the garden and allow for storage of hose when not in use. Neta reels and trolleys require some assembly and come with instructions for setup.

Hose hangers and reels are great for keeping hoses neat and make them easier to use. Neta has a range to suit every budget, from simple hose hangers to heavy-duty reels and a trolley for transporting heavy hoses around large gardens. By storing a hose on a reel its lifetime is extended because it is kept out of the sun and safe from cars and general wear and tear. Careful storage also reduces the risk of kinking and knotting and will keep garden hoses performing well for many more years.

Hose Hangers & Reels


42

ALUMINIUM HOSE HANGERS

No-rust aluminium hanger which can be easily fixed to walls, fences or posts for tidy storage of ladders, hoses, outdoor chairs, bikes etc.Requires 8 gauge screws (not included).

Hose Hangers


PLASTIC HEAVY DUTY HOSE HANGERS

Large plastic hose hangers that can take the load. Available with either a handy storage shelf or cabinet for extra hose accessories.

Holds up to 45m of 12mm hose. Requires 8 gauge screws (not included).

PLASTIC HOSE HANGER

Can be easily fixed to walls, fences or posts, for tidy storage of garden hoses. Sprinklers or guns can be hung from storage slots under hanger.

Holds up to 30m of 12mm hose. Requires 10 gauge screws (not included).

STAINLESS STEEL HOSE HANGER

Frame made from 304 stainless steel materials with solid brass fittings Includes 1.8m connection hose. Large base for wall mounting. Quality guaranteed for 5 years. Holds up to 100m of 12mm hose or up to 50m of 18mm hose. Suitable for domestic use.


Sleeve - Brown MH/GA000GA21 014412 1 5

Sleeve - Heritage Green MH/GA000GA23 014641 1 5

Sleeve - Platinum MH/GA000GA22 014627 1 5

Sleeve - Brushed Aluminium MH/GA000GA25 141415 1 5

Sleeve - Storage Shelf MH/GA0P00HH1 015372 1 4

Sleeve - Storage Cabinet with Shelf MH/GA0P00HH2 015389 1 4

Labelled MH/GA0P00HHP 014962 5 12

Sleeve MH/GA0HHSS1 141125 1 -

3 1 4 2 1 2 0 1 4 4 1 29

3 1 4 2 1 2 0 1 4 6 4 19

3 1 4 2 1 2 0 1 4 6 2 79

3 1 4 2 1 2 1 4 1 4 1 59

3 1 4 2 1 2 0 1 5 3 7 29

3 1 4 2 1 2 0 1 5 3 8 99

3 1 4 2 1 2 0 1 4 9 6 29

3 1 4 2 1 2 1 4 1 1 2 59


43

Hose Reels


NEW WAVE HOSE REEL SUITS 12MM HOSE

Quality plastic and metal construction, holding up to 30 metres of 12mm garden hose. Connects to 12mm click-on hose connectors.

PORTABLE HOSE REEL SET 12MM X 15M HOSE & FITTINGS

Portable hose reel, comes with 15m of garden hose, nozzle, tap adaptor and hose connector and hose connector with stop. Free standing or wall mountable.Great overall set suitable for all watering applications. Does not include hose reel connector set (see page 45)

NEW WAVE HOSE TROLLEY SUITS 12MM HOSE

Quality plastic and metal construction, holding up to 30m of 12mm hose. Hose trolley is free standing or wall mountable. Move from tap to tap and unwind with a simple pull. Easy to assemble, instructions supplied.

RETRACTABLE HOSE REELS

Retractable hose reel with 15m or 20m hose length. Automatically retractable with the ability to stop anywhere and lock in the selected length. 2m connection hose, wall mountable with 180º swivel, mounting bracket and bolts supplied.

STOWAWAY COMPACT HOSE 10M A durable 8mm braided hose with Multi-Pattern Spray Gun. Ideal for small balconies, courtyards or even the boat.Fittings suitable for both ¾” and 1” outlet taps. Individually shrinkwrapped.

Box - 15M MH/GA0HRR015 141156 1 -

Box - 20M MH/GA0HRR020 141163 1 -

Sleeve MH/GA0SHR015 141286 1 3

8mm x 10m -RR Box GH/N010CHR01 465887 6 6

Box MH/GA0HT0020 141293 1 6

Box MH/GA0HR0020 013460 1 6

3 1 4 2 1 2 1 4 1 1 5 69

3 1 4 2 1 2 1 4 1 1 6 39

3 1 4 2 1 2 1 4 1 2 8 69

3 1 4 2 1 2 4 6 5 8 8 79

3 1 4 2 1 2 1 4 1 2 9 39

3 1 4 2 1 2 0 1 3 4 6 09



44

SIDEWINDER HOSE REEL SUITS 12MM HOSE

Easy to use sidewinder hose reel made from UV stabilised materials. Free standing or wall mountable, suitable for up to 50m of 12mm hose.

Labelled MH/GA0HRSW50 141170 1 3


HOSE TROLLEY STAINLESS STEEL

The perfect watering companion, this reel is ergonomically designed and made from stainless 304 rustproof materials for a longer life.Easy for gardeners to transport around the yard.Quality guaranteed for 5 years. Holds up to 50m of 12mm hose or up to 30m of 18mm hose.

Hose Reels

HOSE REEL STAINLESS STEEL

A diverse hose reel with the ability to be freestanding, wall or floor mountable.Longer lasting, made from stainless 304 rustproof materials.Holds up to 50m of 12mm hose or up to 30m of 18mm hose.Quality guaranteed for 5 years. Includes hanger bracket.

Stainless Steel Trolley & Reels

WALL MOUNT STAINLESS STEEL HOSE REEL

Made from 304 materials. Includes 1.8m connection hose. Large base for wall mounting.

Quality guaranteed for 5 years. Holds up to 100m of 12mm hose or up to 50m of 18mm hose.Suitable for domestic use.Frame made from 304 stainless steel materials with solid brass fittings.Suits ¾” hose connections.


Box MH/GA0HRSS1 141101 1 -

Box MH/GA0HTSS1 141118 1 -

Box MH/GA0HRHDS1 141309 1 1

3 1 4 2 1 2 1 4 1 1 7 09

3 1 4 2 1 2 1 4 1 1 0 19

3 1 4 2 1 2 1 4 1 1 1 89

3 1 4 2 1 2 1 4 1 3 0 99


45


Hose Reel Accessories

HOSE REEL HANGER

Convenient accessory for mounting a hose reel onto a wall. Holds the hose reel in place while unrolling the hose. Storage slots for nozzles and sprinklers. Suits most metal frame hose reels.Requires 8 gauge screws (not included).Suits most metal frame hose reels.

HOSE REEL GUIDE PLASTIC

Convenient accessory for any wall mounted hose reel. Keeps hose aligned when unrolling at any angle. Narrow opening prevents fittings from passing through.Suits both 12mm and 18mm hose. Requires 10 gauge screws (not included)

HOSE REEL CONNECTOR SET 12MM PLASTIC

Convenient method for connecting a hose reel to a tap. Includes 1.5m of quality hose and two Neta plastic 12mm click-on hose connectors.


Tie card MH/GA0HRMP00 015051 1 12

Tie card - RR Box MH/GA0HG0000 141446 5 20

Sleeve MH/GA0P00HRC 015396 4 4

3 1 4 2 1 2 0 1 5 0 5 19

3 1 4 2 1 2 1 4 1 4 4 69

3 1 4 2 1 2 0 1 5 3 9 69


46

Area 1m2 2m2 5m2 10m2 20m2

Litres 10 20 50 100 200

The table below shows how much water to use on various areas to equal 10mm of rainfall.

A comprehensive range of hoses and adaptors are available to connect to existing rainwater piping.

RainwaterRain gauges provide the ability to determine how much extra water a garden actually needs to supplement natural rainfall and avoid overwatering.

Looking at nature as a guide, 10mm of rainfall is considered good for the garden in most areas. Rainfall of 10mm is the same as 10 litres of water spread evenly over a square metre of garden.


47

PROFESSIONAL RAIN GAUGE - 250MM

Small diameter inner cylinder for accuracy. Large outer cylinder for increased capacity. Measures up to 250mm of rainfall.

Supplied with stainless steel screws and rainfall chart.

BACKYARD RAIN GAUGE - 150MM

Tapered gauge for accurate measuring of low rainfall. Measures up to 150mm of rainfall.Supplied with stainless steel screws and rainfall chart.

Rain Gauges

EASY RAIN GAUGE - 120MM

Plastic rain gauge can be mounted on walls, posts or placed into the ground with a spike. Measures up to 120mm of rainfall. Perfect accessory for any garden.


1/Box MH/GA0PRG250 016362 1 24

1/Blister MH/GA0PRG150 016294 6 24

1/Blister MH/GA0P00RGP 014993 4 4

3 1 4 2 1 2 0 1 6 3 6 29

3 1 4 2 1 2 0 1 6 2 9 49

3 1 4 2 1 2 0 1 4 9 9 39


48 RGD Corporation - Ph 08 9358 1466 -Email [email protected]

49

IrrigationIrrigation Pipe .............................................................50

Irrigation Pipe Fittings ................................................56

Irrigation Planner .......................................................80

Integral Dripline Fittings ............................................. 81

Micro Irrigation Fittings ...............................................85

Lawn Irrigation .......................................................... 106


50

The Neta irrigation product range at a glance

Product Group Product Options Product Features & Users

LDPE poly pipesupply lines

Garden-Pol General DIY home garden use

LO-POL For professional landscape and agricultural applications

Max Operating Pressure 300kPa. Water temperature should not to exceed 35°C*. *Higher water temperatures reduce kPa

Riser tube LDPE General purpose tube

PVC Flexible tube suited to tight corners

Garden drip Pressure compensation Brown LDPE pipe with drippers every 30cm Retail packaging contains helpful design information

Non-pressure compensation

Irrigation fittings The most comprehensive range of barbed and threaded, nuts and tails, joiners, tees, elbows and valves

Stores can supply whatever the customer needs

Micro sprays & sprinklers Range of different fixed or adjustable spray patterns

Fixed and adjustable coverage Colour coded for flow rate options

Drippers Fixed output Fixed and adjustable outputs Base options - barbed, threaded or complete with stake Pressure compensation and non-pressure compensation dripper options

Adjustable output

Barbed base

Threaded base

Complete with stake

Pressure compensating

Non-pressure compensating

Stakes Huge range of stake options Useful for anchoring irrigation pipe to garden beds Connect and support riser tube to irrigation supply pipe Support sprays, sprinklers and drippers away from the irrigation pipe and above foliage

Accessories Filters Stores can tailor their offering to provide an extensive system that will suit their customers wants and needs

Pressure reducers

Tub outlets

Cable ties


51

Manufactured from quality UV stabilised plastics and nylonScalable: ‘add-on’ system – customers can start small and add to it as requiredIndividual components are low in cost, so the home gardener can start small and improve their system over time

Features & Benefits

Garden

IrrigationAn irrigation system is the best way to maximise water efficiency and still maintain a healthy garden. A Neta irrigation system assists customers in building a custom irrigation system that ensures each area of the garden gets the right amount of water. Neta’s Retail Ready system makes it easy for your customer to select components and simple for retailers to order, display and carry an extensive range of garden irrigation fittings.

The time and money spent in the initial setup will be rewarded by the time and money saved by having an efficient system in place. A irrigation system can be automated to further enhance its convenience. When programmed, it will quietly turn itself on and off whenever the garden needs water and allows gardeners to get on with other jobs.

The best complete irrigation package

Neta are professionals in micro irrigation, and as an advocate for efficient and effective watering are continuously improving the Neta irrigation product range.

Perfecting the ‘add-on’ system – the home gardener can start small (small garden, part garden, manual) and add to it as required

Individual components are low in cost, so the home gardener can start small and improve their system over time

Neta’s Retail Ready packaging gives retailers choice of hang sell, labelled RR to suit the requirements of any store

What sets Neta irrigation apart?

Neta can supply a full package for any size or style of irrigation system

Neta provides a printed design and planning tool to assist the home gardener with the right selection of irrigation products for their garden

System components are manufactured from quality UV stabilised plastics


52

Garden-Pol is ideally suited for domestic home irrigation systems. Operating Pressure = 300kPa

Irrigation Pipe

Garden-Pol LDPE

Low Density Riser Tube is ideal for connecting micro irrigation stakes, sprinklers and drippers located away from the main poly pipe supply line.

Riser Tube LDPE


13mm x 25m MI/GP0130025 420015 5 5

13mm x 50m MI/GP0130050 420268 3 3

19mm x 25m MI/GP0190025 420039 5 5

19mm x 50m MI/GP0190050 420282 3 3

4mm x 5m MI/004000005 420206 10 10

4mm x 10m MI/004000010 420213 10 10

4mm x 25m MI/004000025 420220 5 5

4mm x 100m MI/004000100 420244 3 3

4mm x 250m MI/004000250 420251 1 1

NOMINAL DIAMETER

COIL LENGTH


13mm (½”) ID

25m MI/GP0130025 420015 5 5

13mm (½”) ID

50m MI/GP0130050 420268 3 3

19mm (¾”) ID

25m MI/GP0190025 420039 5 5

19mm (¾”) ID

50m MI/GP0190050 420282 3 3

3 1 4 2 1 2 4 2 0 0 1 59

3 1 4 2 1 2 4 2 0 2 6 89

3 1 4 2 1 2 4 2 0 0 3 99

3 1 4 2 1 2 4 2 0 2 8 29

3 1 4 2 1 2 4 2 0 2 0 69

3 1 4 2 1 2 4 2 0 2 1 39

3 1 4 2 1 2 4 2 0 2 2 09

3 1 4 2 1 2 4 2 0 2 5 19

3 1 4 2 1 2 4 2 0 2 4 49



53

Flexible riser tube is more flexible than riser tube, and therefore more suited to sharp bends or colder weather. Use for connecting micro irrigation stakes, sprinklers and drippers located away from the main poly pipe line.

Flexible Riser Tube PVC

Irrigation Pipe


4mm x 5m MI/F04000005 420701 5 50

4mm x 10m MI/F04000010 420718 5 20

4mm x 25m MI/F04000025 420725 2 12

4mm x 30m MI/F04000030 420732 2 12

4mm x 50m MI/F04000050 420749 1 12

4mm x 100m MI/F04000100 420756 1 6

4mm x 250m MI/F04000250 420763 1 1

5mm x 30m MI/F05000030 420923 1 12


4mm x 5m MI/F04000005 420701 5 50

4mm x 10m MI/F04000010 420718 5 20

4mm x 25m MI/F04000025 420725 2 12

4mm x 30m MI/F04000030 420732 2 12

4mm x 50m MI/F04000050 420749 1 12

4mm x 100m MI/F04000100 420756 1 6

4mm x 250m MI/F04000250 420763 1 1

5mm x 30m MI/F05000030 420923 1 12

3 1 4 2 1 2 4 2 0 7 0 19

3 1 4 2 1 2 4 2 0 7 1 89

3 1 4 2 1 2 4 2 0 7 2 59

3 1 4 2 1 2 4 2 0 7 3 29

3 1 4 2 1 2 4 2 0 7 4 99

3 1 4 2 1 2 4 2 0 7 5 69

3 1 4 2 1 2 4 2 0 7 6 39

3 1 4 2 1 2 4 2 0 9 2 39


54

GardenDrip - 30cm Spacing

Poly tube with drippers pre-installed at set spacings. Ideal for narrow garden beds or large landscaped areas where drippers have been chosen to conserve water. Suitable for 13mm micro irrigation fittings.

LITRES PER HOUR (NOMINAL)

OPERATION PRESSURE

2Lph 100 KPa

4Lph 100 KPa

2Lph PC 250 KPa

Irrigation Pipe


2Lph

13mm x 25m MD/GD1320A30 427144 5 5

13mm x 50m MD/GD1320030 422972 5 5

13mm x 100m MD/GD1320B30 427151 1 -

13mm x 200m MD/GD1320D30 427168 1 -

4Lph

13mm x 25m MD/GD1340A30 427175 5 5

13mm x 50m MD/GD1340030 422989 5 5

13mm x 100m MD/GD1340B30 427182 1 -

13mm x 200m MD/GD1340D30 427199 1 -

2Lph Pressure Compensating

13mm x 25m MD/GDP132A30 426079 5 5

13mm x 50m MD/GDP132030 422996 5 5

13mm x 100m MD/GDP132B30 427090 1 -

3 1 4 2 1 2 4 2 7 1 4 49

3 1 4 2 1 2 4 2 2 9 7 29

3 1 4 2 1 2 4 2 7 1 5 19

3 1 4 2 1 2 4 2 7 1 6 89

3 1 4 2 1 2 4 2 7 1 7 59

3 1 4 2 1 2 4 2 2 9 8 99

3 1 4 2 1 2 4 2 7 1 8 29

3 1 4 2 1 2 4 2 7 1 9 99

3 1 4 2 1 2 4 2 6 0 7 99

3 1 4 2 1 2 4 2 2 9 9 69

3 1 4 2 1 2 4 2 7 0 9 09


55

Neta's Lo–Pol™ is recommended for professional landscape and agricultural applications. It is manufactured to Neta's own high standard. Regular testing, including environmental stress crack resistance is undertaken to ensure that Neta's Lo–Pol™ will not split at the fittings.

Operating Pressure = 300kPa.

Lo-Pol Pipe

LO–POL™ - LOW DENSITY POLYETHYLENE PIPE

Irrigation Pipe

NOMINAL DIAMETER

COIL LENGTH


13mm (½”) ID

25m MI/013000025 421210 5 5

13mm (½”) ID

50m MI/013000050 421234 3 3

19mm (¾”) ID

25m MI/019000025 421418 5 5

19mm (¾”) ID

50m MI/019000050 421432 3 3

40˚C 280kPa

45˚C 220kPa

50˚C 170kPa

55˚C 130kPa

60˚C 100kPa

PRESSURE RATING This poly pipe is capable of withstanding a working pressure of 300kPa (3 Bar) where temperatures of the pipe and water are nor more than 35˚C. If operating temperatures are more than this, the pressure rating of the pipe reduces as follows:

3 1 4 2 1 2 4 2 1 2 1 09

3 1 4 2 1 2 4 2 1 2 3 49

3 1 4 2 1 2 4 2 1 4 1 89

3 1 4 2 1 2 4 2 1 4 3 29

MANUFACTURED TO AUSTRALIAN STANDARDS AS2698-1 TYPE 30 OPERATING PRESSURE 300KPA


56

Poly Pipe & 4mm Tube

FittingsA variety of fittings are available to help install your micro irrigation system.

Joiners

End Plugs

Tees

Elbows

Directors

In-line Valves

Filters

Pressure Reducers

Pipe Ratchet Clips

Saddle Clamps

Releasable Cable Ties

Garden-Pol PipeIdeally suited for domestic home irrigation systems. Available in 13mmand 19mm diameters.

Low Density Riser TubeIdeal for connectingmicro irrigation stakes,4mm sprinklers & drippers located away from the main poly pipe line.

Flexible Riser TubeHas the same uses as LowDensity Riser Tube, but it ismore flexible and thereforebetter suited to sharp bendsor colder weather. Suitablefor use with 4mm fittings, sprays and drippers.

TipSecure all 13mm and 19mm poly pipe

joins with pipe ratchet clips.

Pipe & Fittings

13mm & 19mm poly pipe is strong yet light and flexible making it easy to use. For easier handling before installation, uncoil and lay in the sun. Neta’s comprehensive range of irrigation fittings include barbed and threaded fittings in a variety of sizes and accessories including releasable pipe ties and pipe ratchet clips.


57

Poly Pipe & 4mm Tube

FittingsA variety of fittings are available to help install your micro irrigation system.

Joiners

End Plugs

Tees

Elbows

Directors

In-line Valves

Filters

Pressure Reducers

Pipe Ratchet Clips

Saddle Clamps

Releasable Cable Ties

Garden-Pol PipeIdeally suited for domestic home irrigation systems. Available in 13mmand 19mm diameters.

Low Density Riser TubeIdeal for connectingmicro irrigation stakes,4mm sprinklers & drippers located away from the main poly pipe line.

Flexible Riser TubeHas the same uses as LowDensity Riser Tube, but it ismore flexible and thereforebetter suited to sharp bendsor colder weather. Suitablefor use with 4mm fittings, sprays and drippers.

TipSecure all 13mm and 19mm poly pipe

joins with pipe ratchet clips.

Irrigation Pipe Fittings

Labelled - RR Box ML/RRJ250000 113160 50 200

Bulk MF/J25000020 070050 20 300

Bulk MF/J32000010 070067 10 500

13MM BARB JOINERRepairs or joins 2 lengths of 13mm poly pipe.

4/Consumer Pack - RR Box MR/RRJ130000 116406 10 120


Bulk MF/J13000020 070029 20 1500

2/Consumer Pack - RR Box MR/RRJ190000 116413 10 80


Bulk MF/J19000020 070043 20 800

Barbed Fittings



Bulk MF/J16000020 070036 20 1000


Joiners



3 1 4 2 1 2 1 1 6 4 0 69

3 1 4 2 1 2 1 1 3 1 4 69

3 1 4 2 1 2 0 7 0 0 2 99

3 1 4 2 1 2 0 7 0 0 3 69

3 1 4 2 1 2 1 1 6 4 1 39

3 1 4 2 1 2 1 1 3 1 5 39

3 1 4 2 1 2 0 7 0 0 4 39

3 1 4 2 1 2 1 1 3 1 6 09

3 1 4 2 1 2 0 7 0 0 5 09

3 1 4 2 1 2 0 7 0 0 6 79


58

2/Consumer Pack - RR Box MR/RRRJ19130 116826 10 120

Labelled - RR Box ML/RRRJ25190 113221 45 360

Bulk MF/RJ2519020 070159 20 500

Bulk MF/RJ3225010 070166 10 700


Bulk MF/RJ2513020 070142 20 600

19MM X 13MM BARB REDUCING JOINERJoins 2 different size poly pipes.




Bulk MF/RJ1913020 070128 20 1000

Bulk MF/RJ1916020 070135 20 800

Reducing Joiners


Barbed Fittings

PACK PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE



Bulk MF/RJ1613020 070111 20 100016MM X 13MM BARB REDUCING JOINERJoins 2 different size poly pipes.

3 1 4 2 1 2 0 7 0 1 1 19

3 1 4 2 1 2 1 1 6 8 2 69

3 1 4 2 1 2 1 1 3 2 0 79

3 1 4 2 1 2 0 7 0 1 2 89

3 1 4 2 1 2 0 7 0 1 3 59

3 1 4 2 1 2 1 1 3 2 1 49

3 1 4 2 1 2 0 7 0 1 4 29

3 1 4 2 1 2 1 1 3 2 2 19

3 1 4 2 1 2 0 7 0 1 5 99

3 1 4 2 1 2 0 7 0 1 6 69


59

13MM BARBED TAKE OFF The shorter end is inserted into a grommet to provide a perfect seal.

Bulk MF/TO0813020 072528 20 2300

4/Consumer Pack - RR Box MR/RRTO13130 117250 10 120

Bulk MF/TO1313020 072573 20 1600

Bulk MF/TO1616020 072580 20 1200


Bulk MF/TO1919020 072597 20 800


Barbed Take Off


Barbed Fittings


13MM X 8MM BARBED TAKE OFF The shorter end is inserted into a grommet to provide a perfect seal.


3 1 4 2 1 2 0 7 2 5 2 89

3 1 4 2 1 2 1 1 7 2 5 09

3 1 4 2 1 2 0 7 2 5 7 39

3 1 4 2 1 2 0 7 2 5 8 09

3 1 4 2 1 2 1 1 7 2 6 79

3 1 4 2 1 2 0 7 2 5 9 79


60


Barbed Fittings


19MM ID CURVED FLANGE GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe.Made from natural rubber.

5/Consumer Pack- RR Box MR/RRGRC0190 116338 10 80

Bulk MF/GRC000050 072634 50 1000

Bulk MF/GRT006050 072610 50 20006MM ID TOP HAT GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe.

Made from natural rubber.

5/Consumer Pack-RR Box MR/RRGRT0190 116352 10 80

Bulk MF/GRT019050 072658 50 1250

19MM ID TOP HAT GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe. Made from natural rubber.

Grommets

Bulk MF/GRD000050 072627 50 20008MM ID DOUBLE FLANGE GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe.Made from natural rubber.

5/Consumer Pack- RR Box MR/RRGRT0130 116345 10 120

Bulk MF/GRT000050 072641 50 3000

13MM ID TOP HAT GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe. Made from natural rubber.

Bulk MF/GRT016050 072665 50 175016MM ID TOP HAT GROMMETRubber grommets are used in conjunction with take-off fittings to provide a small diameter poly pipe branch from a large supply pipe. The grommets fit inside a hole drilled in the supply pipe.Made from natural rubber.

3 1 4 2 1 2 0 7 2 6 2 79

3 1 4 2 1 2 1 1 6 3 3 89

3 1 4 2 1 2 0 7 2 6 3 49

3 1 4 2 1 2 0 7 2 6 1 09

3 1 4 2 1 2 1 1 6 3 4 59

3 1 4 2 1 2 0 7 2 6 4 19

3 1 4 2 1 2 0 7 2 6 6 59

3 1 4 2 1 2 1 1 6 3 5 29

3 1 4 2 1 2 0 7 2 6 5 89


61

13MM BARB WITH GRIP END PLUGPlugs the end of poly pipe. Easy-grip ends to remove plug to flush poly pipe.

4/Consumer Pack- RR Box MR/RRP130000 116703 10 120

Labelled - RR Box ML/RRP130000 113177 200 800

Bulk MF/P13000020 072429 20 3000

2/Consumer Pack- RR Box MR/RRP190000 116710 10 120


Bulk MF/P19000020 072443 20 1200


Bulk MF/P25000020 072450 20 800

19MM BARB WITH GRIP END PLUGPlugs the end of poly pipe. Easy-grip ends to remove plug to flush poly pipe

25MM BARB END PLUGPlugs the end of poly pipe.


Barbed Fittings


End Plugs

Bulk MF/P32000010 072467 10 400

32MM BARB END PLUGPlugs the end of poly pipe.

3 1 4 2 1 2 1 1 6 7 0 39

3 1 4 2 1 2 1 1 3 1 7 79

3 1 4 2 1 2 0 7 2 4 2 99

Bulk MF/P16000020 072436 20 200016MM BARB END PLUGPlugs the end of poly pipe.

3 1 4 2 1 2 0 7 2 4 3 69

3 1 4 2 1 2 1 1 6 7 1 09

3 1 4 2 1 2 1 1 3 1 8 49

3 1 4 2 1 2 0 7 2 4 4 39

3 1 4 2 1 2 1 1 3 1 9 19

3 1 4 2 1 2 0 7 2 4 5 09

3 1 4 2 1 2 0 7 2 4 6 79


62

Labelled - RR Box ML/RRT250000 113269 35 140

Bulk MF/T25000020 070258 20 600

Bulk MF/T32000010 070265 10 250

13MM BARB TEEUsed to branch poly pipe of the same size.

4/Consumer Pack - RR Box MR/RRT130000 117168 10 80



Barbed Fittings





Bulk MF/T13000020 070227 20 700

Bulk MF/T16000020 070234 20 500


Bulk MF/T19000020 070241 20 300



Tees

3 1 4 2 1 2 1 1 7 1 6 89

3 1 4 2 1 2 1 1 3 2 4 59

3 1 4 2 1 2 0 7 0 2 2 79

3 1 4 2 1 2 0 7 0 2 3 49

3 1 4 2 1 2 1 1 7 1 7 59

3 1 4 2 1 2 1 1 3 2 5 29

3 1 4 2 1 2 0 7 0 2 4 19

3 1 4 2 1 2 1 1 3 2 6 99

3 1 4 2 1 2 0 7 0 2 5 89

3 1 4 2 1 2 0 7 0 2 6 59


63

2/Consumer Pack - RR Box MR/RRRT19130 116888 10 80

19MM X 13MM BARB REDUCING TEEUsed to branch poly pipe of a different size.

Labelled - RR Box ML/RRRT25190 112996 20 160

Bulk MF/RT2519020 070357 20 600

Bulk MF/RT3225010 070364 10 300


Bulk MF/RT2513020 070340 20 700

13MM X 19MM BARB INCREASING TEE Used to branch poly pipe of different sizes. Most commonly used at the edge of gardens to run a watering line in 2 directions.

2/Consumer Pack - RR Box MR/RRIT13190 116369 10 80


Bulk MF/RT1913020 070326 20 400

Bulk MF/RT1916020 070333 20 400



Labelled - RR Box ML/RRIT13190 113139 40 320

Bulk MF/IT1319020 073556 20 400


Barbed Fittings


Reducing Tees

Bulk MF/RT1613020 070319 20 50016MM X 13MM BARB REDUCING TEEUsed to branch poly pipe of a different size.



Increasing Tees

3 1 4 2 1 2 0 7 0 3 1 99

3 1 4 2 1 2 1 1 6 8 8 89

3 1 4 2 1 2 1 1 3 2 3 89

3 1 4 2 1 2 0 7 0 3 2 69

3 1 4 2 1 2 0 7 0 3 3 39

3 1 4 2 1 2 1 1 2 9 8 99

3 1 4 2 1 2 0 7 0 3 4 09

3 1 4 2 1 2 1 1 2 9 9 69

3 1 4 2 1 2 0 7 0 3 5 79

3 1 4 2 1 2 0 7 0 3 6 49

3 1 4 2 1 2 1 1 3 1 3 99

3 1 4 2 1 2 1 1 6 3 6 99

3 1 4 2 1 2 0 7 3 5 5 69


64


Threaded Fittings


Labelled - RR Box ML/RRTTF1915 113368 20 160

Bulk MF/TTF191520 070425 20 240

19MM BARB X ½” BSP FEMALE TEEProvides a branch with female thread. Commonly used with articulated risers and pop-ups or poly prop risers and shrub adaptors.

Labelled - RR Box ML/RRTTF2515 113375 20 160

Bulk MF/TTF251520 070432 20 600

25MM BARB X ½” BSP FEMALE TEEProvides a branch with female thread. Commonly used with articulated risers and pop-ups or poly prop risers and shrub adaptors.

Tees

Labelled - RR Box ML/RRTTM1315 113382 45 360

Bulk MF/TTM131520 070524 20 600

13MM BARB X ½” BSP MALE TEEProvides a branch with a male thread. Commonly used to connect directly to pop-up lawn sprinklers.

2/Consumer Pack - RR Box MR/RRTTM1915 117335 10 80


Bulk MF/TTM192020 070548 20 300


Bulk MF/TTM252020 070562 20 600


Bulk MF/TTM251520 070555 20 700


Labelled - RR Box ML/RRTTM1915 113399 30 240

Bulk MF/TTM191520 070531 20 300

19MM BARB X ¾” BSP MALE TEEProvides a branch with a male thread. Commonly used to connect directly to pop-up lawn sprinklers.



3 1 4 2 1 2 1 1 3 3 6 89

3 1 4 2 1 2 0 7 0 4 2 59

3 1 4 2 1 2 1 1 3 3 7 59

3 1 4 2 1 2 0 7 0 4 3 29

3 1 4 2 1 2 1 1 3 3 8 29

3 1 4 2 1 2 0 7 0 5 2 49

3 1 4 2 1 2 1 1 7 3 3 59

3 1 4 2 1 2 1 1 3 3 9 99

3 1 4 2 1 2 0 7 0 5 3 19

3 1 4 2 1 2 1 1 7 3 4 29

3 1 4 2 1 2 0 7 0 5 4 89

3 1 4 2 1 2 1 1 7 3 5 99

3 1 4 2 1 2 0 7 0 5 5 59

3 1 4 2 1 2 1 1 7 3 6 69

3 1 4 2 1 2 0 7 0 5 6 29


65


Fittings

PACK PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE

Bulk MF/TTM321510 070579 10 360

Bulk MF/TTM322010 070586 10 300

Tees



4/Consumer Pack - RR Box MR/RRE130000 116284 10 80

Labelled - RR Box ML/RRE250000 113115 45 180

Bulk MF/E25000020 070654 20 900

Bulk MF/E32000010 070661 10 400



Bulk MF/E13000020 070623 20 1200

Bulk MF/E16000020 070630 20 800


Bulk MF/E19000020 070647 20 500

Elbows

13MM BARB ELBOWUsed to create corners in poly pipe.





3 1 4 2 1 2 0 7 0 5 7 99

3 1 4 2 1 2 0 7 0 5 8 69

3 1 4 2 1 2 1 1 6 2 8 49

3 1 4 2 1 2 1 1 3 0 9 29

3 1 4 2 1 2 0 7 0 6 2 39

3 1 4 2 1 2 0 7 0 6 3 09

3 1 4 2 1 2 1 1 6 2 9 19

3 1 4 2 1 2 1 1 3 1 0 89

3 1 4 2 1 2 0 7 0 6 4 79

3 1 4 2 1 2 1 1 3 1 1 59

3 1 4 2 1 2 0 7 0 6 5 49

3 1 4 2 1 2 0 7 0 6 6 19


66

2/Consumer Pack - RR Box MR/RRTEM1915 117229 10 80

Labelled - RR Box ML/RRTEM1315 113306 70 560

Bulk MF/TEM131520 070814 20 1000

13MM BARB X ½” BSP MALE ELBOWProvides a bend with a male thread.


Bulk MF/TEM192020 070838 20 500


19MM BARB X ¾” BSP MALE ELBOWProvides a bend with a male thread.


Bulk MF/TEM191520 070821 20 600

Labelled - RR Box ML/RRTEF1915 113283 30 240

Bulk MF/TEF191520 070722 20 320

Labelled - RR Box ML/RRTEF2515 113290 25 200

Bulk MF/TEF251520 070739 20 320

19MM BARB X ½” BSP FEMALE ELBOWProvides a bend with a female thread. Has the same use as the barb x female threaded tee but it is used at the end of a line.

25MM BARB X ½” BSP FEMALE ELBOWProvides a bend with a female thread. Has the same use as the barb x female threaded tee but it is used at the end of a line.

Threaded Fittings


Elbows


3 1 4 2 1 2 1 1 3 2 8 39

3 1 4 2 1 2 0 7 0 7 2 29

3 1 4 2 1 2 1 1 3 2 9 09

3 1 4 2 1 2 0 7 0 7 3 99

3 1 4 2 1 2 1 1 3 3 0 69

3 1 4 2 1 2 0 7 0 8 1 49

3 1 4 2 1 2 1 1 7 2 2 99

3 1 4 2 1 2 1 1 3 3 1 39

3 1 4 2 1 2 0 7 0 8 2 19

3 1 4 2 1 2 1 1 7 2 3 69

3 1 4 2 1 2 0 7 0 8 3 89


67

Threaded Fittings



Bulk MF/TEM251520 070845 20 300


Bulk MF/TEM252020 070852 20 900

Bulk MF/TEM321510 070869 10 550

Bulk MF/TEM322010 070876 10 500

19MM BARB CORNER ELBOW

Ideal for corners. Use the barb corner elbow for plain poly pipe.

Labelled - RR Box ML/RREC19000 113122 25 200

Bulk MF/EC1900000 070272 20 180

19MM BARB X ½” BSP MALE CORNER ELBOWIdeal for corners. Use the male threaded corner elbow for pop-up sprinklers.

2/Consumer Pack - RR Box MR/RRTCEM195 117182 10 80



Labelled - RR Box ML/RRTCEM195 113276 30 240

Bulk MF/TCEM19150 070937 20 200

Elbows




3 1 4 2 1 2 1 1 7 2 4 39

3 1 4 2 1 2 0 7 0 8 4 59

3 1 4 2 1 2 1 1 3 3 2 09

3 1 4 2 1 2 0 7 0 8 5 29

3 1 4 2 1 2 0 7 0 8 6 99

3 1 4 2 1 2 0 7 0 8 7 69

3 1 4 2 1 2 1 1 3 1 2 29

3 1 4 2 1 2 0 7 0 2 7 29

3 1 4 2 1 2 1 1 3 2 7 69

3 1 4 2 1 2 1 1 7 1 8 29

3 1 4 2 1 2 0 7 0 9 3 79


68

13MM BARB X ½” BSP MALE DIRECTOR Connects poly pipe to female threaded outlets.

2/Consumer Pack - RR Box MR/RRD130150 116123 10 80

Bulk MF/D13015020 071705 20 1000


13MM BARB X ¾” BSP MALE DIRECTORConnects poly pipe to female threaded outlets.

Labelled - RR Box ML/RRD130200 113023 50 400

Bulk MF/D13020020 071712 20 600

13MM BARB X 1” BSP MALE DIRECTORConnects poly pipe to female threaded outlets.



Bulk MF/D13025020 071729 20 400

19MM BARB X ½” BSP MALE DIRECTORConnects poly pipe to female threaded outlets.


Bulk MF/D19015020 071736 20 700

Threaded Fittings


Directors


3 1 4 2 1 2 1 1 6 1 2 39

3 1 4 2 1 2 0 7 1 7 0 59

3 1 4 2 1 2 1 1 6 1 3 09

3 1 4 2 1 2 1 1 3 0 2 39

3 1 4 2 1 2 0 7 1 7 1 29

3 1 4 2 1 2 1 1 6 1 4 79

3 1 4 2 1 2 1 1 3 0 3 09

3 1 4 2 1 2 0 7 1 7 2 99

3 1 4 2 1 2 1 1 3 0 4 79

3 1 4 2 1 2 0 7 1 7 3 69


69


Threaded Fittings



Bulk MF/D19020020 071743 20 500





Bulk MF/D19025020 071750 20 360



Bulk MF/D25020020 071767 20 1200



Bulk MF/D25025020 071774 20 900

Bulk MF/D32025010 071781 10 600

Bulk MF/D32032010 071798 10 500

Directors


32MM BARB X 1¼” BSP MALE DIRECTORConnects poly pipe to female threaded outlets.

3 1 4 2 1 2 1 1 3 0 5 49

3 1 4 2 1 2 0 7 1 7 4 39

3 1 4 2 1 2 1 1 6 1 5 49

3 1 4 2 1 2 1 1 3 0 6 19

3 1 4 2 1 2 0 7 1 7 5 09

3 1 4 2 1 2 1 1 3 0 7 89

3 1 4 2 1 2 0 7 1 7 6 79

3 1 4 2 1 2 1 1 3 0 8 59

3 1 4 2 1 2 0 7 1 7 7 49

3 1 4 2 1 2 0 7 1 7 8 19

3 1 4 2 1 2 0 7 1 7 9 89


70


13MM BARB IN-LINE VALVE Used to isolate or regulate water supply.

In-Line Valves

1/Consumer Pack - RR Box MR/RRV130000 117489 10 80

19MM BARB IN-LINE VALVE WITH O-RINGSUsed to isolate or regulate water supply.

1/Consumer Pack - RR Box MR/RRV190000 117496 20 80

25MM BARB IN-LINE VALVE WITH O-RINGSUsed to isolate or regulate water supply.

Labelled- RR Box ML/RRV250000 113474 10 40

Bulk MF/V25025025 072160 10 60


Bulk MF/V13000020 072122 20 400

Bulk MF/V16000020 072139 20 120


Bulk MF/V19000020 072146 20 120

16MM BARB IN-LINE VALVE Used to isolate or regulate water supply.


3 1 4 2 1 2 1 1 7 4 8 99

3 1 4 2 1 2 1 1 3 4 3 69

3 1 4 2 1 2 0 7 2 1 2 29

3 1 4 2 1 2 0 7 2 1 3 99

3 1 4 2 1 2 1 1 7 4 9 69

3 1 4 2 1 2 1 1 3 4 4 39

3 1 4 2 1 2 0 7 2 1 4 69

3 1 4 2 1 2 1 1 3 4 7 49

3 1 4 2 1 2 0 7 2 1 6 09


71

19MM BARB X ½” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.



In-Line Valves

19MM BARB X ¾” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.

25MM BARB X 1” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.

½” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.

¾” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.

1” BSP MALE THREAD IN-LINE VALVE WITH O-RINGS Same performance as the barb in-line valve with o-rings but with a combination of threads or barbs.

Labelled- RR Box ML/RRV19500M 113450 20 80

Bulk MF/V190050BM 072061 20 120


Bulk MF/V190075BM 072078 20 120


Bulk MF/V250100BM 072115 10 60


Bulk MF/V050050BM 072085 20 100


Bulk MF/V075075BM 072092 20 100


Bulk MF/V100100BM 072108 10 60

3 1 4 2 1 2 1 1 3 4 5 09

3 1 4 2 1 2 0 7 2 0 6 19

3 1 4 2 1 2 1 1 3 4 6 79

3 1 4 2 1 2 0 7 2 0 7 89

3 1 4 2 1 2 1 1 3 4 8 19

3 1 4 2 1 2 0 7 2 1 1 59

3 1 4 2 1 2 1 1 3 4 0 59

3 1 4 2 1 2 0 7 2 0 8 59

3 1 4 2 1 2 1 1 3 4 1 29

3 1 4 2 1 2 0 7 2 0 9 29

3 1 4 2 1 2 1 1 3 4 2 99

3 1 4 2 1 2 0 7 2 1 0 89


72


In-Line Filters

13MM BARB IN-LINE FILTER Connects to poly tube to filter out particles in the water supply. Removable screen for cleaning. 50 Mesh filter size. Suits domestic irrigation applications.


1/Consumer Pack - RR Box - Black MR/RRF130000 116307 10 40

Bulk - Black MF/F13000010 071903 10 60

Bulk - Clear MF/FC1300010 071941 10 60



Bulk - Black MF/F19000010 071927 10 50

Bulk - Clear MF/FC1900010 071965 10 50

25MM BARB IN-LINE FILTER

Connects to poly tube to filter out particles in the water supply. Removable screen for cleaning. 50 Mesh filter size. Suits domestic irrigation applications.


Bulk - Black MF/F25000010 071934 10 50

Bulk - Clear MF/FC2500010 071972 10 50


Bulk - Black MF/F16000010 071910 10 60

Bulk - Clear MF/FC1600010 071958 10 60

Bulk - Black MF/FCB100010 071989 10 140

Bulk - Clear MF/FCC100010 071996 10 140

Bulk - 50 Mesh MF/FS5000010 072009 10 300

BARBED FILTER CASEReplacement case for In-Line filters.

3 1 4 2 1 2 1 1 6 3 0 79

3 1 4 2 1 2 0 7 1 9 0 39

3 1 4 2 1 2 0 7 1 9 4 19

3 1 4 2 1 2 0 7 1 9 1 09

3 1 4 2 1 2 0 7 1 9 5 89

3 1 4 2 1 2 1 1 6 3 1 49

3 1 4 2 1 2 0 7 1 9 2 79

3 1 4 2 1 2 0 7 1 9 6 59

3 1 4 2 1 2 1 1 6 3 2 19

3 1 4 2 1 2 0 7 1 9 3 49

3 1 4 2 1 2 0 7 1 9 7 29

3 1 4 2 1 2 0 7 1 9 8 99

3 1 4 2 1 2 0 7 1 9 9 69

3 1 4 2 1 2 0 7 2 0 0 99

BARBED FILTER SCREENReplacement screen for In-Line filters. 50 Mesh filter size. Suits domestic irrigation applications.


73

¾” FBSP NUT X 13MM TAILScrews onto a tap outlet and joins to poly pipe. With easy-grip wings.

1/Consumer Pack - RR Box MR/RRNT07513 116567 10 120

Bulk MF/NT0751320 071316 20 600


Bulk MF/NT0751620 071323 20 600

1” FBSP NUT X 13MM TAILScrews onto a tap outlet and joins to poly pipe. With easy-grip wings.


Bulk MF/NT1001320 071347 20 400

13MM UNIVERSAL NUT & TAILConnects to 1” or ¾” tap outlets and joins to poly pipe. With easy-grip wings.

Threaded Fittings & Connectors

1/Consumer Pack - RR Box MR/RRNTU0013 116611 10 80

19MM UNIVERSAL NUTS & TAILConnects to 1” or ¾” tap outlets and joins to poly pipe. With easy-grip wings.

1/Consumer Pack - RR Box MR/RRNTU0019 116628 10 80

Pressure Reducer

¾” BSP PRESSURE REDUCER Used to reduce water pressure, maintaining optimum dripper and spray performance. Can be screwed directly on ¾” tap or fitting.

Pressure Reducer Performance (kPa)

Inlet Pressure 100 200 300 400 500

Outlet Pressure 75 100 115 125 145

1/Consumer Pack - RR Box MR/RRPR07500 116727 10 80

Bulk MF/PR0750010 005595 10 200


Nut & Tail




Bulk MF/NT0751920 071330 20 600

3 1 4 2 1 2 1 1 6 7 2 79

3 1 4 2 1 2 0 0 5 5 9 59

3 1 4 2 1 2 1 1 6 6 1 19

3 1 4 2 1 2 1 1 6 6 2 89

3 1 4 2 1 2 1 1 6 5 6 79

3 1 4 2 1 2 0 7 1 3 1 69

3 1 4 2 1 2 0 7 1 3 2 39

3 1 4 2 1 2 1 1 6 5 7 49

3 1 4 2 1 2 0 7 1 3 3 09

3 1 4 2 1 2 1 1 6 5 8 19

3 1 4 2 1 2 0 7 1 3 4 79


74



1” BSP FEMALE X 3/4” BSP MALE UNIVERSAL ADAPTORConverts 1” tap outlet to ¾” tap outlet.

BLANK NUT WITH 3/4” BSP WASHERProvides a seal at the end of a male BSP threaded fitting.

1” BSP MALE X 3/4” BSP FEMALE REDUCING BUSHAllows a 1” tap fitting to connect to a ¾” tap outlet.



Bulk MF/NT1001920 071361 20 400



Bulk MF/NT1002520 071378 20 300

1/Consumer Pack - RR Box MR/RRRB10075 116819 10 120

Bulk MF/RB0100075 070494 20 1000

3/Consumer Pack - RR Box MR/RRNU0750B 116635 10 120

Bulk MF/NU075000B 071446 20 800

1/Consumer Pack - RR Box MR/RRUA02520 117373 10 80

Bulk MF/UA0252020 071217 20 200

Nut & Tail


Bulk MF/NT1001620 071354 20 400

3/4” BSP BACK TO BACK NUT Used to join 2 male threaded fittings of the same size.

Bulk MF/NBB075000 071477 20 800

Fitting Accessories

BLANK NUT WITH 1” BSP WASHERProvides a seal at the end of a male BSP threaded fitting.

3/Consumer Pack - RR Box MR/RRNU1000B 116642 10 80

Bulk MF/NU100000B 071453 20 500


3 1 4 2 1 2 0 7 1 3 5 49

3 1 4 2 1 2 1 1 6 5 9 89

3 1 4 2 1 2 0 7 1 3 6 19

3 1 4 2 1 2 1 1 6 6 0 49

3 1 4 2 1 2 0 7 1 3 7 89

3 1 4 2 1 2 0 7 1 4 7 79

3 1 4 2 1 2 1 1 6 8 1 99

3 1 4 2 1 2 0 7 0 4 9 49

3 1 4 2 1 2 1 1 7 3 7 39

3 1 4 2 1 2 0 7 1 2 1 79

3 1 4 2 1 2 1 1 6 6 3 59

3 1 4 2 1 2 0 7 1 4 4 69

3 1 4 2 1 2 1 1 6 6 4 29

3 1 4 2 1 2 0 7 1 4 5 39


75

13MM BARB X 12MM CLICK-ON JOINER WITH BUG CAP Clicks onto 12mm hose connectors and joins to 13mm poly pipe. Bug cap keeps out ants and insects when not in use.

2/Consumer Pack - RR Box MR/RRCJBC130 116062 10 120

Labelled - RR Box ML/RRCJBC130 113009 60 480

19MM BARB X 12MM CLICK-ON JOINER WITH BUG CAP Clicks onto 12mm hose connectors and joins to 19mm poly pipe. Bug cap keeps out ants and insects when not in use.

2/Consumer Pack - RR Box MR/RRCJBC190 116079 10 80

Labelled - RR Box ML/RRCJBC190 113016 60 480




Fitting Accessories

¾“ BSP NUT WASHERS

Replacement washers for all tap fittings and nuts.

1“ BSP NUT WASHERS

Replacement washers for all tap fittings and nuts.

Bulk MF/NW0750100 071422 100 2500

Bulk MF/NW1000100 071439 100 1500

Click-On Joiners

13MM BUG CAPFor use with 13mm click-on joiners. Bug cap keeps out ants and insects when not in use. Separate Joiner available.

Bulk MF/BC1300020 071484 20 2000

Bulk MF/BC1900020 071491 20 80019MM BUG CAPFor use with 19mm click-on joiners. Bug cap keeps out ants and insects when not in use. Separate Joiner available.

13MM BARB X 12MM CLICK-ON JOINER Clicks onto 12mm hose connectors and joins to 13mm poly pipe. Separate Bug Cap available.

Bulk MF/CJ1300020 071620 20 1000

Bulk MF/CJ1900020 071637 20 600

3 1 4 2 1 2 0 7 1 4 2 29

3 1 4 2 1 2 0 7 1 4 3 99

3 1 4 2 1 2 1 1 6 0 6 29

3 1 4 2 1 2 1 1 3 0 0 99

3 1 4 2 1 2 1 1 6 0 7 99

3 1 4 2 1 2 1 1 3 0 1 69

3 1 4 2 1 2 0 7 1 4 8 49

3 1 4 2 1 2 0 7 1 4 9 19

3 1 4 2 1 2 0 7 1 6 3 79

3 1 4 2 1 2 0 7 1 6 2 09

19MM BARB X 12MM CLICK-ON JOINER Clicks onto 12mm hose connectors and joins to 19mm poly pipe. Separate Bug Cap available.


76

½“ BSP MALE X FEMALE ELBOWUsed to create corners in threaded fittings.


Click-On Connectors

13MM BARB X 12MM CLICK-ON HOSE CONNECTOR Clicks onto 12mm tap adaptors and joins to poly pipe.

½“ FEMALE THREADED COUPLINGUsed to join 2 male threaded fittings of the same size.


1/Consumer Pack - RR Box MR/RRCC13000 116048 10 80

Bulk MF/CC1300010 071675 10 250

19MM BARB X 12MM CLICK-ON HOSE CONNECTOR Clicks onto 12mm tap adaptors and joins to poly pipe.

1/Consumer Pack - RR Box MR/RRCC19000 116055 10 80

Bulk MF/CC1900010 071682 10 200

Labelled - RR Box ML/RRTEMF150 113337 50 400

Bulk MF/TEMF15020 071026 20 500

¾“ BSP MALE X FEMALE ELBOWUsed to create corners in threaded fittings.


Bulk MF/TEMF20020 071033 20 300

1“ BSP MALE X FEMALE ELBOWUsed to create corners in threaded fittings.


Bulk MF/TEMF25020 071040 20 140

4/Consumer Pack - RR Box MR/RRTCFF150 117199 10 80

Bulk MF/TCFF15020 071125 20 600

3 1 4 2 1 2 1 1 6 0 4 89

3 1 4 2 1 2 0 7 1 6 7 59

3 1 4 2 1 2 1 1 6 0 5 59

3 1 4 2 1 2 0 7 1 6 8 29

3 1 4 2 1 2 1 1 3 3 3 79

3 1 4 2 1 2 0 7 1 0 2 69

3 1 4 2 1 2 1 1 3 3 4 49

3 1 4 2 1 2 0 7 1 0 3 39

3 1 4 2 1 2 1 1 3 3 5 19

3 1 4 2 1 2 0 7 1 0 4 09

3 1 4 2 1 2 1 1 7 1 9 99

3 1 4 2 1 2 0 7 1 1 2 59

Threaded Fittings


77

¾“ FEMALE THREADED COUPLINGUsed to join 2 male threaded fittings of the same size.


Bulk MF/TCFF20020 071132 20 300

1“ FEMALE THREADED COUPLINGUsed to join 2 male threaded fittings of the same size.


Bulk MF/TCFF25020 071149 20 200

13MM BARB TUB OUTLET Suits a range of water reticulation applications in the hydroponics and nursery industries.

Fittings



1/Consumer Pack - RR Box MR/RRTOA0130 117281 10 80

Bulk MF/TOA013000 073907 10 300

TUB OUTLET SCREENThe screen “press fits” into the tub outlet to keep out hydroponic media.

TUB OUTLET EXTENSIONThe extension “press fits” into the tub outlet allowing the water to drain out of the tub at different levels.

19MM BARB TUB OUTLETSuits a range of water reticulation applications in the hydroponics and nursery industries.

25MM BARB TUB OUTLETSuits a range of water reticulation applications in the hydroponics and nursery industries.


Bulk MF/TOA019000 073914 10 250


Bulk MF/TOA025000 073921 10 200

1/Consumer Pack - RR Box MR/RRTOS0000 117328 10 120

Bulk MF/TOS000000 073945 10 400

1/Consumer Pack - RR Box MR/RRTOE0000 117311 10 120

Bulk MF/TOE000000 073938 10 500

Bulk MF/TOW000000 070074 50 1000

Tub Outlets

TUB OUTLET WASHERReplacement washer for barbed tub outlet.

3 1 4 2 1 2 1 1 7 2 0 59

3 1 4 2 1 2 0 7 1 1 3 29

3 1 4 2 1 2 1 1 7 2 1 29

3 1 4 2 1 2 0 7 1 1 4 99

3 1 4 2 1 2 1 1 7 2 8 19

3 1 4 2 1 2 0 7 3 9 0 79

3 1 4 2 1 2 1 1 7 2 9 89

3 1 4 2 1 2 0 7 3 9 1 49

3 1 4 2 1 2 1 1 7 3 0 49

3 1 4 2 1 2 0 7 3 9 2 19

3 1 4 2 1 2 1 1 7 3 2 89

3 1 4 2 1 2 0 7 3 9 4 59

3 1 4 2 1 2 1 1 7 3 1 19

3 1 4 2 1 2 0 7 3 9 3 89

3 1 4 2 1 2 0 7 0 0 7 49


78

150MM PIPE AND CABLE TIESConvenient ties for all irrigation, cable and domestic uses. Release tab allows the ties to be reused.

10/Consumer Pack - RR Box MR/RRCT15047 116093 25 200

Bulk MF/CT150470B 073488 100 6000


Bulk MF/CT200470B 073495 100 5000



Bulk MF/CT300480B 073501 100 4000



Irrigation Accessories


13MM PIPE SADDLE CLAMPUsed to attach poly pipe to fences and walls in garden areas. Screws or nails not included.

10/Consumer Pack - RR Box MR/RRPS13000 116741 10 80

Bulk MF/PS1300050 072320 50 3000

19MM PIPE SADDLE CLAMPUsed to attach poly pipe to fences and walls in garden areas. Screws or nails not included.


Bulk MF/PS1900050 072337 50 2000

13MM PIPE SADDLE CLAMP WITH NAILUsed to attach poly pipe to fences and walls in garden areas.

10/Consumer Pack - RR Box MR/RRPS13N00 116758 10 120

Bulk MF/PS13N0050 072344 50 4000

19MM PIPE SADDLE CLAMP WITH NAILUsed to attach poly pipe to fences and walls in garden areas.

10/Consumer Pack - RR Box MR/RRPS19N00 116772 10 80

Bulk MF/PS19N0050 072351 50 2000

3 1 4 2 1 2 1 1 6 0 9 39

3 1 4 2 1 2 0 7 3 4 8 89

3 1 4 2 1 2 1 1 6 1 0 99

3 1 4 2 1 2 0 7 3 4 9 59

3 1 4 2 1 2 1 1 6 1 1 69

3 1 4 2 1 2 0 7 3 5 0 19

3 1 4 2 1 2 1 1 6 7 4 19

3 1 4 2 1 2 0 7 2 3 2 09

3 1 4 2 1 2 1 1 6 7 6 59

3 1 4 2 1 2 0 7 2 3 3 79

3 1 4 2 1 2 1 1 6 7 5 89

3 1 4 2 1 2 0 7 2 3 4 49

3 1 4 2 1 2 1 1 6 7 7 29

3 1 4 2 1 2 0 7 2 3 5 19


79


13MM PIPE RATCHET CLIPUsed on all home irrigation fittings to secure fittings into poly pipe. Recommended on every connection.

Irrigation Accessories


15/Consumer Pack - RR Box MR/RRC130000 116017 10 120

Bulk MF/C13000050 072221 50 4000



Bulk MF/C25000050 072252 50 1300


Bulk MF/C32000050 072269 50 750

3 1 4 2 1 2 1 1 6 0 1 79

3 1 4 2 1 2 0 7 2 2 2 19


Bulk MF/C16000050 072238 50 30003 1 4 2 1 2 0 7 2 2 3 89



Bulk MF/C19000050 072245 50 2500

3 1 4 2 1 2 1 1 6 0 2 49

3 1 4 2 1 2 0 7 2 2 4 59

3 1 4 2 1 2 1 1 6 0 3 19

3 1 4 2 1 2 0 7 2 2 5 29

3 1 4 2 1 2 0 7 2 2 6 99

Strong ratchet teeth

Wide ribbed handles for easy tightening

Internal ridges for extra grip

Improved ‘easy-use style’ available in 13mm & 19mm ratchet clips


80

Retail ReadyIrrigation Planner

Neta’s Home Irrigation Installation Planner was created to help customers plan their irrigation system. The planner is a free tool available in-store and is supplied in a Retail Ready box so it can be conveniently slotted in between the Retail Ready irrigation products on the shelf. The advantage of the irrigation planner is that it assists customers in choosing the right products in-store, so increases your sales. The planner has simple-to-follow instructions, a graph for drawing an irrigation plan and a shopping list with product graphics. It is the most popular publication requested by Neta customers, and is available free of charge to display in-store. To order your starter kit, which consists of a Retail Ready box and 2 packs of brochures, add the order code 588203 to your next order. Re-ordering a pack of brochures is simple, just scan the re order code on the box.

CLIMATEEasy

DIY

Watering chartWatering only when your plants need moisture is the key to water conservation and healthy plants. This chart gives you a basic guide to watering times according to observations.

GARDENS

Micro Sprays & Sprinklers

Clay 30–40 mins every 6th day

30–40 mins every 5th day

30–40 mins every 3rd day

Loam 20–30 mins every 5th day


20–30 mins every 2nd day

Sandy 10–20 mins every 3rd day


10–20 mins every day

LAWNS

Watering Method

Soil type Cool to Warm 15–25°C

Warm to Hot 25–35°C

Very Hot

>35°C

Pop-Ups Clay 20–30 mins every 8th day






Sandy 5–10 mins every 4th day



Drippers Clay 4–6 hours every 6th day

4–6 hours every 5th day

4–6 hours every 3rd day

Loam 2–4 hours every 5th day


2–4 hours every 2nd day

Sandy 1–2 hours every 3rd day


1–2 hours every day

POTS AND BASKETS

Drippers & Misters

Potting mix

Until moist

every 3rd day

Until moist every 2nd day

Until moist every day

Water at the right time. Watering your garden in the early morning or evening reduces water loss through evaporation. Don’t water if it’s too windy, or use a dripper system in windy areas.

Choose the right plants. Local native varieties and other water wise plants attract wildlife and need less maintenance and watering.

Mulch gardens to lock in the moisture. As well as reducing evaporation and water run-off, a good quality mulch will also provide nutrients to the plants and restrict weed growth.

Water deeply when your lawn needs it. If your lawn springs back after stepping on it, it doesn’t require watering. When you do water, a good soaking every now and then is preferable to frequent, light watering. Thorough watering encourages deeper roots, giving you a stronger, more drought resistant lawn.

Water saving tips

Efficient irrigation Easy water-wise Irrigation for gardens & lawns

IrrigationPlanner

Perform the flow rate test at the time of day you plan to

run your irrigation.

Don’t run the irrigation at the same time as

showers and washing or you will have less flow

than measured.

EnjoyLet Neta bring your garden to life with an irrigation system. A Neta irrigation system will allow you to water your whole garden by turning on your garden tap giving you time to enjoy your garden.

CreateTime spent on planning and set up will be richly rewarded by having an efficient irrigation system in place. Draw up your irrigation plan. Position components on the garden plan and create your list of fittings and sprays in the shopping list section which contains flow and spacing information. Add extra supply lines if you need them.

SelectIdentify your garden areas and choose the components you need for your irrigation system from the shopping list. Icons and colours make the components easy to position on your plan, and to find in store.

PlanGetting startedYou need to know how big your garden is so you can position your sprays, drippers and pop-ups correctly. Once you know this, you will be able to create an accurate shopping list. For smaller areas, you can step it out, but for best results measure your home and gardens. To get started you need to do a bucket test, then measure and plan.

Measure & PlanOn the graph provided in this planner, draw a map of your property and mark all your garden taps and the areas to be watered.

Work Out the Flow RateYou need to know the available water from the tap. To do this turn the tap on fully, slide a 9 litre bucket under the tap, and time how many seconds it takes to fill to the 9L mark. Then you can work out your flow rate.

What do you want to water? Suggested Method Fittings & Pipe Spray Drip Lawn

Garden Beds

Lawn

Vegetable Patch

Pot Plants

Greenhouses & Pergolas

Tips

Spray

Pop-Up

Drip

Spray

Spray

Drip

Drip

Spray

Pop-Up

Drip

Drip

Spray System

Drip System

Lawn System

Reducing Bush

Nut & Tail

13mm Ratchet Clip

13mm Elbow

4mm Rigid Riser with Adaptor

Micro SprinklerSpray

Jet13mm Poly Pipe

13mm Poly Pipe

4mm Rigid Riser with Adaptor

EndPlug

Pressure Reducer

Agri Drip Emitter

Adjustable Dripper on Stake

Nut & Tail

13mm Ratchet Clip

13mm Poly Pipe

13mm Poly Pipe

EndPlug

P4 Snap Dripper

4mm Barb Joiner

13mm Elbow

Nut & Tail

19mm Poly Pipe

19mm Poly Pipe

Pop-Up Sprinkler

Pop-Up Sprinkler

19mm Tee 19mm Elbow

19mm Elbow

19mm Ratchet Clip

19mm Poly Pipe

Typical LayoutsHow measure & plan you garden and lawn irrigation system

Measure and draw your home, garden & lawn areas Draw a plan to scale on the garden plan graph paper inside this planner. Choose a scale and write this in the SCALE section on the graph paper include all garden beds, pathways, lawns, garden shed, pergola, patios and driveways. For best results, measure your home and gardens with a tape measure.

Measure your water flow Measure the available water from the tap that will supply the system. Do this with a bucket test. Turn the tap on full and slidea 9 L bucket under the tap and time how long it takes to fill to the 9L mark. Work out the water supply capacity by using the Flow Rate Chart.

Mark on your plan where each watering method will be used Match the different plant groups in your garden to different watering methods. • Use Drippers for shrubs and ground cover.

• Use Micro Sprays for flower beds, garden beds, shrubs and ground cover.

• Use Drippers or Misters for pots and hanging baskets.

• Use 50mm Pop-Up Sprinklers for short lawn and 100mm for long lawn

In this example Micro Sprays (blue) are marked where there are garden beds, Pop-Ups (green) where there are Lawns, and Drippers (brown) in the Pergola.

Select watering methods in the Shopping Lists Selecting types of Spray, Drippers & Pop-Ups is a personal choice. Consider pattern, flow rate and radius to help make these decisions. • Use 90° Pop-Ups in the corner of lawns and gardens. • Use 180° Pop-Ups along the edges and against fences or buildings. • Place 360° Pop-Ups in the centre of large areas. NOTE: Micro Sprays, Drippers and Pop-Up Sprinklers should not be mixed together on the same watering line. This is because there are different flow rates required for Sprays and Drippers.

Mark the positions on your plan

Space Sprays & Pop-Ups apart by the same distance as their spray radius. This ensures that the water spray will overlap, as in the below illustration. Overlapping spray patterns achieves the most even water coverage for your garden.

Drippers should be positioned at the base of each plant so that the water reaches the root zone. Drippers are ideal for narrow, windy or sloping garden beds, where Sprays would waste water.

Decide the number of lines

As a guide, most homes will have an average of 4 watering lines. To work out how many lines you will need:1. Write the total number of each type Spray, Dripper and Pop Up in the Shopping Lists. 2. Multiply these numbers the Lpm column and Total each in the Total Flow Rate box. 3. Fill in the Calculate Flow Rate Chart, along with the Flow Rate 5. Using the Flow Rate Chart, work out the number of lines you will need and round up to the nearest whole (for example 2.7 will be 3 lines).

4mm Flexi Tube

For a full list of handy installation tips, please refer to the section next to the garden plan graph paper

in this planner.

Tips

Drippers are used in the garden bed along the side of the house because the garden bed is too narrow for Micro Sprays.

They would spray onto the path and waste water.

Tips

Spray

Pop-Up

Drip

Drip

50mm 100mm

not sure what your last change means:19mm threaded tee where both elbows are?

SCALE: One small square = .............. metres

Show on the plan: Fence & boundaries House outline Driveways Paving Pergola Garden areas Lawn areas Garden Taps





Gardens

Pergola

Lawn

Gardens

Radius of sprinkler = Spacing

SpacingSprinkler Sprinkler Sprinkler

Spacing Spacing

Product Where to Use

Spray Drip

Number

of Lines

Total Required

Pressure Reducer

Reduces water pressure and maintain optimal dripper and spray performance.

13mm Uni Nut & Tail

Connects 13mm poly pipe to the tap.

13mm In-Line Filter

Filter out particles in the water supply. Install in 13mm poly pipe and use ratchet clips to secure.

13mm Click-on Connector

Connects 13mm poly pipe to the tap. Easy to disconnect is required.

13mm Click-on Joiner & Bug Cap

Clicks into hose connector, cap keeps ants and bugs out.

Create your shopping list For your convenience, the flow rate of each product is stated as Lpm (Litres per minute)

Spray System Drip System Pop-Up System

Accessories

Spray & Drip

Pop-Ups

Flow rate chart

Decide the number of lines

Connect to the tap

50mm 100mm

Watering Method Pattern RadiusSpacing

(m)

Flow Rate

(Lpm)

Qty TotalFlowRate

Spray Jet Full Circle 1.8 45

Spray Jet Half Circle 1.8 45

Spray Jet Quarter Circle

1.8 45

Micro Spray Blue Base Full Circle

2.2 40

Micro Spray Blue Base Half Circle

2.2 40

Micro Spray Blue Base Quarter Circle

2.2 40

Micro Spray Blue Base Rectangular Strip

6x0.6 40

Mister Yellow Base Full Circle

0.5 90

Spectrum Spray Jet Thread

1.8 45

Adjustable Micro Spray Full Circle

3.5 90

Adjustable Micro Spray Half Circle

2.5 90

Adjustable Micro Spray Quarter Circle

2.4 90

Micro Sprinkler Blue Full Circle

3.2 45

Adjustable Micro Sprinkler

0-3.7 90

Rotor Rain Green 4.3 94

Spectrum Spray Jet Stake

1.8 45

Watering Method Flow Rate

(Lpm)

Qty TotalFlowRate

P4 Snap Dripper 0.7

Adjustable Flow Dripper Barb 0.55

Agri Dripper 2 Lph 0.03

Agri Dripper 4 Lph 0.07

Agri Dripper PC 2 Lph 0.03

Agri Dripper PC 4 Lph 0.07

Adjustable Flow Dripper Stake 0.55

Midi Dripper on Stake 0.07

Watering Method Pattern RadiusSpacing

(m)

Flow Rate

(Lpm)

Qty TotalFlowRate

Pop-Up Sprinkler Full Circle

3.5 10

Pop-Up Sprinkler Three Quarter Circle

3.5 7.5

Pop-Up Sprinkler Half Circle

3.5 5

Pop-Up Sprinkler Quarter Circle

3.5 3

Pop-Up Sprinkler Adjustable Arc

3.5 8.5

Pop-Up Sprinkler Centre Strip

1-1.8 5

Pop-Up Sprinkler Narrow Strip

1-1.8 5

Product Where to use Qty

Saddle Clamps Keep poly pipe tidy by attaching to fences, posts and pergola structures to prevent sagging and twisting.

Saddle Clamps with Nails

Keep poly pipe tidy by attaching to fences, posts and pergola structures to prevent sagging and twisting. Nail included.

Cable Ties150mm, 200mm, 300m

Convenient ties for general purpose use around the garden. The release tab allows the tie to be reused.

Ratchet Clips13mm, 19mm

Secures fittings to pipe. Use with every connection.

Punch Spanner Punches holes in poly tubetoattach 4mm fittings. Spanner used to insert and remove micro sprays in tubing. Hole in handle used to remove caps from two piece micro sprays for cleaning.

Goof Plugs Repairs and seals holes in tube.

Do the bucket test, and then find your flow rate from the tables below.

Time to fill a 9 Litre bucket in seconds

10 11 12 13 14 15 16 17

Flow Rate (Lpm) 49 44 41 37 35 32 30 29

Time to fill a 9 Litre bucket in seconds

18 19 20 21 22 23 24 25

Flow Rate (Lpm) 27 26 24 23 22 21 20 19

Product Total Flow Rate

Bucket TestFlow Rate

(Lpm)

Equals Number

of Lines

Spray System

Drip System

Pop-Up System

Examples

1. Enter the total flow rate from each of the shopping lists.2. Enter the flow rates.3. Calculate the number of lines.4. Round up to find the number of lines you will need.

÷÷÷

===

Product Where to Use 50mm 100mm Number

of Lines

Total Required

19mm Uni Nut & Tail

Connects 19mm poly pipe to the tap.

19mm In-Line Filter

Filter out particles in the water supply. Install in 19mm poly pipe and use ratchet clips to secure.

x =

Product Description Qty

Punch Spanner Punches holes in poly tubetoattach 4mm fittings. Spanner used to insert and remove micro sprays in tubing. Hole in handle used to remove caps from two piece micro sprays for cleaning.

Rigid Riser 200mm/ 300mm/400mm

200mm - Water above young plants or under advanced plants.300mm - Water advanced plants.400mm - Extra height, water large gardens areas.

13mm Rigid Pipe Stake

Holds poly pipe in place and supports the risers.

Rigid Riser Stake Holds riser in place, move around to position close to the plant.

Riser Jet Stake & Tube

Saves time. Choose a sprays or sprinkler and attach.

13mm Barb Joiner Repairs or joins poly pipe.

13mm Barb Elbow Creates corners in poly pipe.

13mm Barb Tee Used to branch 13mm poly pipe.

13mm Barb End Plug

Plugs the end of 13mm poly pipe.

13mm In-Line Valve Used in 13mm poly pipe line, to isolate, regulate or flush the water supply.

13mm Pipe Ratchet Clip


13mm Garden Pol Available in 25m and 50m metre coils.

Time & Water Saving


Pot Stake Use in pot plants to support drippers.

Punch Spanner Punches holes in poly tube to attach 4mm fittings. Spanner used to insert and remove micro sprays in tubing. Hole in handle used to remove caps from two piece micro sprays for cleaning.

13mm Barb Joiner Repairs or joins 13mm poly pipe.

13mm Barb Elbow Creates corners in 13mm poly pipe.


13mm Barb End Plug






4mm Flexi Tube Available in 5m, 10m, 25m, 50m, 30m 100m & 250m coils.

4mm Barb Joiner Connect 4mm tube to main 13mm poly pipe supply line.

4mm Barb Tee Used to branch 4mm tube in 3 directions.

4mm Barb Elbow Creates corners in 4mm tube.

4mm Goof Plug Repairs and seals holes in 4mm tube.

4mm Cross Ideal for greenhouses and pergolas for connecting 4mm tube to water a cluster of plants.

4mm In-Line Valve Use to regulate the water flow to different plants.


19mm Barb Joiner Repairs or joins poly pipe.

19mm Barb Elbow Creates corners in poly pipe.


19mm Barb x 1/2” Male Threaded Elbow

Creates a branch in 19mm poly pipe to connect pop-ups.

19mm Barb x 1/2” Male Threaded Tee

Used at the end of the line to connect a pop-up to 19mm poly pipe.

19mm Barb End Plug







Adjustable Sprays & Sprinklers

Look for adjustable sprays and sprinklers to increase the wetting area radius as the plants grows.

Stake Sets Stakes are available pre assembled with tube, sprays and sprinklers. Choose stake assemblies for convenience to save time.

Total Flow Rate

Add this Flow Rate to the Calculate Lines table

Total Flow Rate


x = x =

Total Flow Rate


Bucket TestFlow Rate




Installation HintsPoly Pipe & Fittings•If you need to straighten Poly Pipe, unroll and place in in the sun with bricks to hold it down.•Handy tools are secateurs for cutting Poly Pipe and multi grips for tightening Ratchet Pipe Clips•Pipe will bend slightly around a corner, but if it looks like kinking, use an Elbow•Run water through all lines to remove debris before attaching Sprays, Drippers or Sprinklers•In cold weather, it may be necessary to dip the end of the Poly Pipe in hot water to make it soft and easier to handle•Use Ratchet Clips at every joint to secure fittings

Pop-Up Systems•Always ensure that the top of the Sprinkler is set slightly above ground level and not at the level of the grass•Run water through all lines to remove debris before attaching nozzles•Choose a 50mm Pop-Up for shorter lawns and 100mm Pop-Up for longer lawns

Spray & Sprinkler Systems•Use a Stake to keep Risers upright•A Rigid Pipe Stake will also secure the main pipe to the ground•A Rigid Riser Stake is best when using 4mm Tube to locate the spray away from the Poly Pipe

Dipper Systems•Drippers are also available with Stakes attached, for positioning in a pot or next to a plant•Use a Pressure Reducer for each dripper watering line to maintain the correct pressure•Drippers can be connected directly into Poly Pipe of by using 4mm Tube & fittings•Use Pressure Compensating Drippers on hilly or sloping gardens to maintain water pressure•Drippers are ideal in windy spots to avoid water evaporation

Useful Accessories•Use the Punch Spanner to pierce a hole in the pipe for Rigid Risers or 4mm Joiners•Use the Punch Spanner to screw Micro Sprays or Spray Jets into Rigid Risers.•Use the hole in the handle of the Punch Spanner to pull apart Micro Sprays for cleaning•If you punch a hole in the wrong place use a Goof Plug to re-seal it•Install an In-Line Filter to filter out particles in the water supply•Install an In-Line Valve to isolate, regulate or flush the water supply•Consider installing an Electronic or Manual style Tap Timer, it will help you manage how much water is used and when

Multi Tap Outlets are good when you need to run multiple lines from one tap. Timers add control over watering times.

CLIMATEEasy

DIY


GARDENS











LAWNS

Watering Method



Very Hot

>35°C



















POTS AND BASKETS

Drippers & Misters

Potting mix

Until moist

every 3rd day







Water saving tips


IrrigationPlanner





than measured.








Garden Beds

Lawn

Vegetable Patch

Pot Plants


Tips

Spray

Pop-Up

Drip

Spray

Spray

Drip

Drip

Spray

Pop-Up

Drip

Drip

CLIMATEEasy

DIY


GARDENS











LAWNS

Watering Method



Very Hot

>35°C



















POTS AND BASKETS

Drippers & Misters

Potting mix

Until moist

every 3rd day







Water saving tips


IrrigationPlanner





than measured.








Garden Beds

Lawn

Vegetable Patch

Pot Plants


Tips

Spray

Pop-Up

Drip

Spray

Spray

Drip

Drip

Spray

Pop-Up

Drip

Drip


81

Joiners & Adaptors - Bulk

JOINERSRepairs and joins two lengths of 16mm dripline pipe.

REDUCING JOINERS Joins 20mm dripline pipe to 16mm dripline pipe.

STRAIGHT ADAPTORS Joins dripline pipe to low density poly pipe.

DIRECTORS Connects dripline to female threaded outlets.

(20mm includes compression nut)

Integral Dripline Fittings

16mm Dripline MF/DJ016D16D 085412 20 1200

20mm Dripline MF/DJ020D20D 085443 20 800

TYPE PRODUCT CODE EAN CODE 9314212+ ORDER QTY CTN QTY BARCODE

20mm x 16mm Dripline MF/DRJ20D16D 085474 20 800

16mm Dripline x 13mm Micro MF/DA016D013 085559 20 1200




16mm Dripline Director MF/DD1602020 070692 20 200



3 1 4 2 1 2 0 8 5 4 1 29

3 1 4 2 1 2 0 8 5 4 4 39

3 1 4 2 1 2 0 8 5 4 7 49

3 1 4 2 1 2 0 8 5 5 5 99

3 1 4 2 1 2 0 8 5 5 3 59

3 1 4 2 1 2 1 0 8 0 6 79

3 1 4 2 1 2 0 8 5 5 0 49

3 1 4 2 1 2 0 7 0 6 9 29

3 1 4 2 1 2 0 7 0 7 0 89

3 1 4 2 1 2 0 7 0 7 1 59

NOTE: Dripline end denoted by Double Barb. Standard low density poly pipe end denoted by Single Barb.

Repairs and joins two lengths of 20mm dripline pipe.


82


Tees & Elbows - Bulk

TEE ADAPTORS Used to branch low density poly pipe to dripline pipe.

ELBOW ADAPTORS Used to create corners connecting low density poly pipe to dripline pipe.


16mm Dripline x 13mm Micro MF/DT016D013 085658 20 600





19mm Micro x 16mm Dripline MF/DT019016D 085672 20 400

25mm Micro x 16mm Dripline MF/DT025016D 085665 20 200

16mm Dripline x 13mm Micro MF/DE016D013 085856 20 1000





3 1 4 2 1 2 0 8 5 6 5 89

3 1 4 2 1 2 0 8 5 6 3 49

3 1 4 2 1 2 1 0 8 0 8 19

3 1 4 2 1 2 0 8 5 6 1 09

3 1 4 2 1 2 0 8 5 6 0 39

3 1 4 2 1 2 0 8 5 6 7 29

3 1 4 2 1 2 0 8 5 6 6 59

3 1 4 2 1 2 0 8 5 8 5 69

3 1 4 2 1 2 0 8 5 8 3 29

3 1 4 2 1 2 1 0 8 0 7 49

3 1 4 2 1 2 0 8 5 8 1 89

3 1 4 2 1 2 0 8 5 8 0 19


83

DRIPLINE VALVES WITH O-RINGS Used to regulate or isolate

water supply.

VALVE FLUSH ¾” FEMALE-WHITE

Dripline Fittings - Bulk



16mm Dripline MF/VDR160000 072030 20 360

16mm Dripline x 13mm Micro MF/VDR160013 072047 20 360

16mm Dripline x 16mm Micro MF/VDR160016 072054 20 360

20mm Dripline MF/VD2000000 072016 20 120

20mm Dripline x 19mm Micro MF/VD2000019 072023 20 120

2.5Lpm MF/DFV075025 070685 20 200

3.4Lpm MF/DFV075034 070678 20 200

END SLEEVES Used at the end of the dripline pipe. Fold over to end and slide over the end sleeve to plug the end of the poly pipe.

RATCHET CLIPS Used on all dripline ‘double’ barbs to secure fittings into poly pipe. Recommended on every connection.

16mm Dripline MF/DES16D000 085214 50 1750

20mm Dripline MF/DES20D000 085245 50 1500

16mm Dripline MF/C16D00050 085016 50 3000

20mm Dripline MF/C20D00050 085030 50 2500

3 1 4 2 1 2 0 8 5 2 1 49

3 1 4 2 1 2 0 8 5 2 4 59

3 1 4 2 1 2 0 8 5 0 1 69

3 1 4 2 1 2 0 8 5 0 3 09

3 1 4 2 1 2 0 7 2 0 3 09

3 1 4 2 1 2 0 7 2 0 4 79

3 1 4 2 1 2 0 7 2 0 5 49

3 1 4 2 1 2 0 7 2 0 1 69

3 1 4 2 1 2 0 7 2 0 2 39

3 1 4 2 1 2 0 7 0 6 8 59

3 1 4 2 1 2 0 7 0 6 7 89

VALVE FLUSH ¾” FEMALE- ORANGE Automatically flushes the line to remove sediment accumulated in the dripline.Connect to a 1/2” thread. Install at the lowest point.


84

Sprays & Sprinklers

Sprays and sprinklers should be selected to suit the size and shape of your garden area and the type of plants you are watering. Sprays & sprinklers are available in adjustable and a wide range of patterns.

TipMix different types of sprays and

sprinklers to achieve maximum coverage and suit individual watering requirements.

Reducing Bush

3/4˝ Nut & Tail

Ratchet Clip

EndPlug

Elbow

Rigid Riser with Adaptor

Poly Pipe

From Tap

Spray Jet Micro Sprinkler

Tee

Adjustable Spray Jet

Rotor Rain

In-Line Valve for flushing

Spectrum Spray Jet (Threaded)

Punch Spanner

A rigid pipe stake will also secure the main pipe to the ground.

TipUse a stake to keep

Risers upright. Rigid Pipe Stake Riser Jet Stake

TipA rigid pipe stake will also secure the main pipe to the ground.

Sprays & Sprinklers


85

Sprays, Drippers, Risers & Stakes

360° FULL CIRCLE Micro spray jets have a fine spray and are suitable for most gardens. Micro spray jets can be installed directly into poly pipe or into rigid risers. Mount the sprays upside-down for optimum watering in greenhouses. Radius = 1.8m Flow Rate = 45Lph @ 150kPa


10/Consumer Pack - RR Box MR/RROPSJ360 116673 20 240

Bulk MF/JFC360005 075000 100 2000

180° HALF CIRCLE

Radius = 1.8m Flow Rate = 45Lph @ 150kPa

90° QUARTER CIRCLE Radius = 1.8m Flow Rate = 45Lph @ 150kPa


Bulk MF/JHC180005 075024 100 2000


Bulk MF/JQC090005 075031 100 2000

Micro Spray Jet - One Piece

Micro Irrigation Fittings

3 1 4 2 1 2 1 1 6 6 7 39

3 1 4 2 1 2 0 7 5 0 0 09

3 1 4 2 1 2 1 1 6 6 6 69

3 1 4 2 1 2 0 7 5 0 2 49

3 1 4 2 1 2 1 1 6 6 5 99

3 1 4 2 1 2 0 7 5 0 3 19

Spray & Sprinkler Performance at Typical Household Pressure @ 150kPaFlow Lph Radius and recommended spacing (m)

360º 180º 90º Narrow Strip (2 x 20º)

Micro Spray Jets One Piece 45 1.8 1.8 1.8

Micro Spray Jets Two Piece Blue Base Green Base Red Base

408088

2.22.73.5

2.22.52.9

2.22.52.5

6.0 long x 0.6 wide7. 1 long x 0.6 wide8.6 long x 0.6 wide

Adjustable Micro Sprays 90 max 0 to 3.5 0 to 2.4 0 to 2.4 up to 9.0 long x 0.6 wide

Mister Yellow Base 90 max 0.5

Micro Sprinkler Blue Base Green Base Red Base Black Base Adjustable

457290

90 max

3.23.53.7

0 to 3.7

Spectrum Spray Jet 45 0 to 1.8

Rotor Rain Mini Sprinkler Green Base Red Base Blue Base Grey Base Yellow Base

94240 125 153 183

4.36.2 4.6 5.3 5.5


86

360° FULL CIRCLE Micro spray jets are a high-performance spray in two pieces.


10/Consumer Pack - RR Box MR/RRMBL3600 116475 20 240

Bulk MF/MBL360155 075611 100 1800

180° HALF CIRCLE Radius = 2.2m Flow Rate = 40Lph @ 150kPa


2 X 20° NARROW STRIP Radius = 6.0m long x 0.6m wide Flow Rate = 40Lph @ 150kPa


Bulk MF/MBL180005 075659 100 1800


Bulk MF/MBL090005 075666 100 1800


Bulk MF/MBL040005 075673 100 1800

Micro Sprays - Two Piece - Blue Base 1.0mm Nozzle




3 1 4 2 1 2 1 1 6 4 7 59

3 1 4 2 1 2 0 7 5 6 1 19

3 1 4 2 1 2 1 1 6 4 6 89

3 1 4 2 1 2 0 7 5 6 5 99

3 1 4 2 1 2 1 1 6 4 5 19

3 1 4 2 1 2 0 7 5 6 6 69

3 1 4 2 1 2 1 1 6 4 4 49

3 1 4 2 1 2 0 7 5 6 7 39


87




10/Consumer Pack - RR Box MR/RRMGR3600 116512 20 240

Bulk MF/MGR360155 075710 100 1800





Bulk MF/MGR180005 075741 100 1800


Bulk MF/MGR090005 075758 100 1800


Bulk MF/MGR040005 075765 100 1800

Micro Sprays - Two Piece - Green Base 1.3mm Nozzle



3 1 4 2 1 2 1 1 6 5 1 29

3 1 4 2 1 2 0 7 5 7 1 09

3 1 4 2 1 2 1 1 6 5 0 59

3 1 4 2 1 2 0 7 5 7 4 19

3 1 4 2 1 2 1 1 6 4 9 99

3 1 4 2 1 2 0 7 5 7 5 89

3 1 4 2 1 2 1 1 6 4 8 29

3 1 4 2 1 2 0 7 5 7 6 59


88

Stakes & Risers

Extend watering coverage and ensure a tidy irrigation system by using stakes and risers. Anchor irrigation pipe can be used in garden beds to connect and support riser tube to irrigation pipe. Also used to support sprays, sprinklers and drippers when installed away from the irrigation pipe.

TipRigid risers are available in 3 sizes: 200mm,

300mm & 400mm to suit the height of plants. Use a 400mm riser for seedlings and

trim the riser when the plant is matureto water under the foliage.

Rigid Riser Stake•Holds rigid risers in place•Easily moved around garden

Rigid Pipe Stake•Holds poly pipe in place•Supports rigid risers

Riser Jet Stake•Multi functional•Attaches sprays & sprinklers to 4mm tube

MiniSprinklerStake•For micro sprinkler and rotor rain sprinklers•Suits large landscape areas

Pot Stake•Supports drippers•Use with pot plants

200mm Rigid Riser•Water above young plants•Water under advanced plants

300mm Rigid Riser•General purpose•Water advanced plants

400mm Rigid Riser•Extra height•Suits large garden areas





10/Consumer Pack - RR Box MR/RRMRE3600 116550 20 240

Bulk MF/MRE360155 075819 100 1800





Bulk MF/MRE180005 075840 100 1800


Bulk MF/MRE090005 075857 100 1800


Bulk MF/MRE040005 075864 100 1800

Micro Sprays - Two Piece - Red Base 1.5mm Nozzle


3 1 4 2 1 2 1 1 6 5 5 09

3 1 4 2 1 2 0 7 5 8 1 99

3 1 4 2 1 2 1 1 6 5 4 39

3 1 4 2 1 2 0 7 5 8 4 09

3 1 4 2 1 2 1 1 6 5 3 69

3 1 4 2 1 2 0 7 5 8 5 79

3 1 4 2 1 2 1 1 6 5 2 99

3 1 4 2 1 2 0 7 5 8 6 49


89

Stakes & Risers

Extend watering coverage and ensure a tidy irrigation system by using stakes and risers. Anchor irrigation pipe can be used in garden beds to connect and support riser tube to irrigation pipe. Also used to support sprays, sprinklers and drippers when installed away from the irrigation pipe.

TipRigid risers are available in 3 sizes: 200mm,

300mm & 400mm to suit the height of plants. Use a 400mm riser for seedlings and

trim the riser when the plant is matureto water under the foliage.

Rigid Riser Stake•Holds rigid risers in place•Easily moved around garden

Rigid Pipe Stake•Holds poly pipe in place•Supports rigid risers

Riser Jet Stake•Multi functional•Attaches sprays & sprinklers to 4mm tube

MiniSprinklerStake•For micro sprinkler and rotor rain sprinklers•Suits large landscape areas

Pot Stake•Supports drippers•Use with pot plants

200mm Rigid Riser•Water above young plants•Water under advanced plants

300mm Rigid Riser•General purpose•Water advanced plants

400mm Rigid Riser•Extra height•Suits large garden areas

Stakes & Risers


90

The Four Easies:Easy to OrderNeta’s Retail Ready range is designed to make it simple for you or your staff to order. Each pack features a scannable barcode and quantities on the front of the box to ensure you get the right product when you place your order.

Easy to OpenNeta’s Retail Ready packaging makes it easier and quicker for you to stock or replenish your in-store displays. Our packaging allows easy opening without the aid of tools such as knives-just tear along the clearly marked perforations to reveal a neat shelf-ready unit. The discarded lid and box are recyclable.

Easy to ShelfNeta’s Retail Ready range gives you a quicker, faster, simpler and Neta solution than decanting individual products and messy displays. When you receive your Retail Ready packs you simply open the pack and place it on the shelf- no shelf labels required, all the information is on the box label. Our Retail Ready is modular, so takes less valuable shelf space than our competitors packaging and creates an eye-catching layout.

Easy to ShopNeta’s Retail Ready range eliminates purchase barriers. Each product is easy to identify, easy to select and easy for your customers to return the item if they choose. Our packaging allows the customer to easily self-select the product and variant.

Branding, packaging and in-store display is what makes one product stand out from another in a retail environment.

Retail ReadyA Neta Retail Solution


91



360° FULL CIRCLE ADJUSTABLE Adjustable micro sprays have the same high performance benefits as micro sprays, with the added benefit of an adjustable tap which enables the flow and radius to be adjusted to suit the area being watered.

Radius = 0-3.5m Flow Rate = 90Lph @ 150kPa

360° YELLOW BASEFine mist spray suitable for delicate seedlings and ferns for use in nurseries. Screws into rigid risers or directly into poly pipe.

Radius = 0-5m Flow Rate = 29Lph @ 150kPa


3/Consumer Pack - RR Box MR/RRVJA3600 117434 20 240

Bulk MF/VJA360004 076304 50 1250

180° HALF CIRCLE ADJUSTABLE Radius = 0-2.4m Flow Rate = 90Lph @ 150kPa

2 X 20° NARROW STRIP Strip = 0-9.0m long Flow Rate = 90Lph @ 150kPa

90° QUARTER CIRCLE Radius = 0-2.4me Flow Rate = 90Lph @ 150kPa


Bulk MF/VJA180004 076335 50 1250


Bulk MF/VJA090004 076359 50 1250


Bulk MF/VJA040004 076366 50 1250

10/Consumer Pack - RR Box MR/RRJMA0000 116420 20 240

Bulk MF/JMA000005 075598 100 1800

Adjustable Micro Sprays - 1.5mm Nozzle

Mister

3 1 4 2 1 2 1 1 7 4 3 49

3 1 4 2 1 2 0 7 6 3 0 49

3 1 4 2 1 2 1 1 7 4 2 79

3 1 4 2 1 2 0 7 6 3 3 59

3 1 4 2 1 2 1 1 7 4 1 09

3 1 4 2 1 2 0 7 6 3 5 99

3 1 4 2 1 2 1 1 7 4 0 39

3 1 4 2 1 2 0 7 6 3 6 69

3 1 4 2 1 2 1 1 6 4 2 09

3 1 4 2 1 2 0 7 5 5 9 89


92




5/Consumer Pack - RR Box MR/RRR100000 116789 20 240

Bulk MF/R10000004 076427 50 1250

BLUE - 1.0MM NOZZLE Radius = 3.2m Flow Rate = 45Lph @ 150kPa

GREEN - 1.3MM NOZZLE Radius = 3.5m Flow Rate = 72Lph @ 150kPa

RED - 1.5MM NOZZLE Radius = 3.7m Flow Rate = 90Lph @ 150kPa

ADJUSTABLE - 1.5MM NOZZLE Radius = 0-3.7m Flow Rate = 90Lph @ 150kPa


Bulk MF/R13000004 076434 50 1250

2/Consumer Pack - RR Box MR/RRRV15000 116918 20 160

Bulk MF/RV1500004 076472 50 600

Micro Sprinklers - Full Circle Pattern


Bulk MF/R15000004 076441 50 1250

Bulk MF/R09000004 076410 50 1250BROWN - 0.9MM NOZZLERadius = 3.4m Flow Rate = 72Lph @ 150kPa

Bulk MF/R20000004 076465 50 1250

ORANGE - 1.8MM NOZZLE Radius = 4.3m Flow Rate = 115Lph @ 150kPa

GREY - 2.0MM NOZZLE Radius = 4.5m Flow Rate = 140Lph @ 150kPa

3 1 4 2 1 2 0 7 6 4 1 09

3 1 4 2 1 2 1 1 6 7 8 99

3 1 4 2 1 2 0 7 6 4 2 79

3 1 4 2 1 2 1 1 6 7 9 69

3 1 4 2 1 2 0 7 6 4 3 49

3 1 4 2 1 2 1 1 6 8 0 29

3 1 4 2 1 2 0 7 6 4 4 19

3 1 4 2 1 2 1 1 6 9 1 89

3 1 4 2 1 2 0 7 6 4 7 29

3 1 4 2 1 2 0 7 6 4 5 89

3 1 4 2 1 2 0 7 6 4 6 59

Bulk MF/R18000004 076458 50 1250

Micro sprinklers are high performance sprinklers suited to large garden areas. The adjustable micro sprinkler includes a tap so that the flow and radius can be adjusted. Screws into rigid risers or stakes.


93



360º SPRAY JET ADJUSTABLE 4MM THREADProduces a fountain-like spray, adjusted by turning the body. Screws into rigid risers or poly pipe.

Radius = 0 - 1.8m Flow Rate = 45Lph @ 150kPa


10/Consumer Pack - RR Box MR/RRSSJT436 116932 15 120

Bulk MF/SSJT04360 076618 50 1500

Bulk MF/SSJ004360 076601 50 1500

5/Consumer Pack - RR Box MR/RRSSJS436 116925 10 80

Bulk MF/SSJS04360 076632 20 600

360º SPRAY JET STAKE ADJUSTABLEProduces a fountain-like spray, adjusted by turning the body. Screws into rigid risers or poly pipe.Stake Length = 135mm


Spectrum Spray Jets

360º SPRAY JET ADJUSTABLE 4MM BARBProduces a fountain-like spray, adjusted by turning the body. Screws into rigid risers or poly pipe.


Bulk MF/SSJT15360 076625 20 800360º SPRAY JET ADJUSTABLE ½” THREADProduces a fountain-like spray, adjusted by turning the body. Screws into rigid risers or poly pipe.


Performance - Fully Open 22 clicks

Pressure (kPa)

Flow(Lph)

Radius(m)

100 64 1.4

150 78 1.8

200 90 2.0

3 1 4 2 1 2 1 1 6 9 3 29

3 1 4 2 1 2 0 7 6 6 1 89

3 1 4 2 1 2 0 7 6 6 0 19

3 1 4 2 1 2 0 7 6 6 2 59

3 1 4 2 1 2 1 1 6 9 2 59

3 1 4 2 1 2 0 7 6 6 3 29

SPRAY STAKE Used in pot plants and planters. Push 3mm tube onto top end of stake to create spray pattern..

Stake Length = 115mm


Bulk MF/STS003180 073037 50 30003 1 4 2 1 2 0 7 3 0 3 79


94

Drippers

Drippers are most commonly used for watering individual plants at ground level, which promotes a strong root system. Drippers suit low water pressure applications and are ideal in windy environments. Drippers are available as adjustable or fixed flow rate.

Use a Pressure Reducer for each dripper

From TapIn Pots or Garden Beds

watering line.

Agri Drip Emitter


3/4˝ Nut & Tail

Ratchet Clip

EndPlug

P4 Snap Dripper

4mm Barb Joiner

Elbow


4mm Riser Tube orFlexi Tube

Poly Pipe

Tee

TipOn hilly or sloping landscapes,

use pressure compensating drippersso all plants watered on the same line

receive a uniform amount of water.

Micro Dripper on Stake

⅜” BSP THREAD GREEN - 1.5MM NOZZLE The Rotor Rain is a professional sprinkler suitable for large garden landscapes. It can be fitted to either the mini sprinkler stake or threaded poly prop risers.





3/Consumer Pack - RR Box MR/RRRRB0900 116871 20 160

Bulk MF/RRB900000 075109 50 1000

3/Consumer Pack - RR Box MR/RRRRB2500 116864 20 160

⅜” BSP THREAD RED - 2.4MM NOZZLE Radius = 6.3m Flow Rate = 240Lph @ 150kPa

Rotor Rain - Mini Sprinklers - Full Circle Pattern

Bulk MF/RRB125000 075116 50 1000⅜” BSP THREAD BLUE - 1.7MM NOZZLE Radius = 4.7m Flow Rate = 125Lph @ 150kPa

Bulk MF/RRB180000 075130 50 1000⅜” BSP THREAD YELLOW - 2.0MM NOZZLE Radius = 5.5m Flow Rate = 183Lph @ 150kPa

Bulk MF/RRB250000 075154 50 1000

⅜” BSP THREAD PURPLE - 2.8MM NOZZLE Radius = 6.4m Flow Rate = 330Lph @ 150kPa

Bulk MF/RRB350000 075178 50 1000

3 1 4 2 1 2 1 1 6 8 7 19

3 1 4 2 1 2 0 7 5 1 0 99

3 1 4 2 1 2 0 7 5 1 1 69

3 1 4 2 1 2 0 7 5 1 3 09

3 1 4 2 1 2 1 1 6 8 6 49

3 1 4 2 1 2 0 7 5 1 5 49

3 1 4 2 1 2 0 7 5 1 7 89

To create a smaller spray diameter use the deflector provided. Remove the spinner and insert the break-off deflector disc. (Save the spinner to revert back in future).

Performance - Tested 0.2m Above Ground

Nozzle Colour & Orifice Size

Pressure (kPa)

Flow(Lph)

Diameter of Throw

(m)

Height Stream(m)

Deflector Diameter

(m)

Green 1.5mm

100 150 200 250

794110120

7.88.79.18.5

0.540.540.640.66

2.8

Blue 1.7mm

100 150 200 250

100125145163

8.69.39.69.3

0.660.740.770.88

2.8

Yellow 2.0mm

100 150 200 250

147183215240

10.011.011.211.0

0.620.800.940.99

3.0

Red 2.4mm

100 150 200 250

195240280315

11.012.512.512.1

0.640.890.991.05

3.2

Purple 2.8mm

100 150 200 250

265330385430

11.212.813.012.4

0.790.921.061.12

4.0


95

Drippers

Drippers are most commonly used for watering individual plants at ground level, which promotes a strong root system. Drippers suit low water pressure applications and are ideal in windy environments. Drippers are available as adjustable or fixed flow rate.

Use a Pressure Reducer for each dripper

From TapIn Pots or Garden Beds

watering line.

Agri Drip Emitter


3/4˝ Nut & Tail

Ratchet Clip

EndPlug

P4 Snap Dripper

4mm Barb Joiner

Elbow


4mm Riser Tube orFlexi Tube

Poly Pipe

Tee

TipOn hilly or sloping landscapes,

use pressure compensating drippersso all plants watered on the same line

receive a uniform amount of water.

Micro Dripper on Stake

Drippers


96

360° ADJUSTABLE DRIPPER - 4MM BARBThe 360° adjustable flow dripper can be adjusted to allow precise water distribution in a tight circular pattern.

Radius = 0-5m Flow Rate = 0-33Lph @ 100kPa

10/Consumer Pack - RR Box MR/RRDAFB436 116215 15 120

Bulk MF/DAF000004 076717 50 1500

360° ADJUSTABLE DRIPPER - 4MM THREAD Radius = 0-5m Flow Rate = 0-33Lph @ 100kPa

10/Consumer Pack - RR Box MR/RRDAFT436 116246 20 160

Bulk MF/DAFT00004 076700 50 1500

3 1 4 2 1 2 1 1 6 2 1 59

3 1 4 2 1 2 0 7 6 7 1 79

3 1 4 2 1 2 1 1 6 2 4 69

3 1 4 2 1 2 0 7 6 7 0 09

4LPH MIDI DRIP EMITTER ON STAKETwo part dripper that can be easily separated for cleaning. The stake ensures the dripper remains in place.Stake Length = 120mm.

4LPH P4 SNAP DRIPPER Two part dripper that can be easily separated for cleaning.

5/Consumer Pack - RR Box MR/RRDMD4SP0 116260 10 80

Bulk MF/DMD4SP000 076816 20 1000

10/Consumer Pack - RR Box MR/RRDAQ0000 116253 15 120

Bulk MF/DAQ000004 076731 50 2000



360° ADJUSTABLE DRIPPER IN-LINE STAKE - 4MM BARB Stake Length = 180mm


5/Consumer Pack - RR Box MR/RRDAFI436 116222 10 120

4mm In-Line


Shrubbler - 360º Adjustable Flow Drippers

3 1 4 2 1 2 1 1 6 2 2 29

3 1 4 2 1 2 1 1 6 2 6 09

3 1 4 2 1 2 0 7 6 8 1 69

3 1 4 2 1 2 1 1 6 2 5 39

3 1 4 2 1 2 0 7 6 7 3 19

360° ADJUSTABLE DRIPPER AND STAKE - 4MM BARBThe 360° adjustable flow dripper can be adjusted to allow precise water distribution in a tight circular pattern.Stake Length = 180mm


5/Consumer Pack - RR Box MR/RRDAFS436 116239 10 80

4mm Barb

3 1 4 2 1 2 1 1 6 2 3 99

3 1 4 2 1 2 0 7 6 6 9 49Bulk MF/DAFS00004 076694 20 600

3 1 4 2 1 2 0 7 6 6 8 79

Bulk MF/DAFT15360 076687 20 1200360° ADJUSTABLE DRIPPER - 1/2” FBSP - THREAD Radius = 0-5m Flow Rate = 0-33Lph @ 100kPa


97

2LPH AGRI DRIP EMITTERSmall button style water efficient dripper. Flow Rate = 2Lph @ 100kPa

2LPH AGRI DRIP EMITTER PRESSURE COMPENSATING Small button style dripper with pressure compensation that maintains the nominal flow rate even as the pressure changes.

Flow Rate = 2Lph @ 100kPa

RIGID RISER STAKE

Rigid Riser screws directly into stake. Riser tube is connected from the stake to poly pipe. Allows for stake to be moved.Stake Length = 180mm




10/Consumer Pack - RR Box MR/RRDAD2000 116161 20 160

Bulk MF/DAD200000 076847 50 2000

4LPH AGRI DRIP EMITTER Flow Rate = 4Lph @ 100kPa

8LPH AGRI DRIP EMITTER Flow Rate = 8Lph @ 100kPa


Bulk MF/DAD800000 076861 50 2000


Bulk MF/DAD400000 076854 50 2000

10/Consumer Pack - RR Box MR/RRDADPC20 116192 20 160

Bulk MF/DADPC2000 076878 50 2000

4LPH AGRI DRIP EMITTER PRESSURE COMPENSATING Small button style dripper with pressure compensation that maintains the nominal flow rate even as the pressure changes.

Flow Rate = 4Lph @ 100kPa

10/Consumer Pack - RR Box MR/RRDADPC40 116208 20 160

Bulk MF/DADPC4000 076885 50 2000

10/Consumer Pack - RR Box MR/RRSTRR040 117007 10 40

Bulk MF/STRR04020 070999 20 400

3 1 4 2 1 2 1 1 6 1 6 19

3 1 4 2 1 2 0 7 6 8 4 79

3 1 4 2 1 2 1 1 6 1 7 89

3 1 4 2 1 2 0 7 6 8 5 49

3 1 4 2 1 2 1 1 6 1 8 59

3 1 4 2 1 2 0 7 6 8 6 19

3 1 4 2 1 2 1 1 6 1 9 29

3 1 4 2 1 2 0 7 6 8 7 89

3 1 4 2 1 2 1 1 6 2 0 89

3 1 4 2 1 2 0 7 6 8 8 59

3 1 4 2 1 2 1 1 7 0 0 79

3 1 4 2 1 2 0 7 0 9 9 99


98

Pots & Baskets

Choose between micro sprays, misters or drippers to water individual pots or baskets. Misters are perfect for irrigating greenhouses or creating misty humid environments for tropical plants.

Pot StakeUsed to secure drippers in pots and gardens.

Midi Drip EmitterTwo part dripper that canbe easily separated for cleaning.Stake ensures dripperremains in place. Perfect for pots - simply run riser tube from the main poly pipe line and attach dripper.

MisterFor a fine mist spray suitable towater seedlings or ferns and perfectto use above hanging baskets. Screw into rigid risers or directly into poly pipe.

TipInstall rigid risers with mister or spray

upside down to water hanging baskets.This also has a cooling effect on patios

and pergolas in summer.

Pots & Baskets


99

RISER JET STAKEMulti-function stake has attachment for micro sprays, rigid risers or riser tube. Supplied with goof plug and barbed joiner.Stake Length = 310mm

13MM RIGID PIPE STAKEHolds 13mm or 19mm poly pipe and supports rigid riser for a tidy finish.

Stake Length = 200mm

200MM RIGID RISER WITH ADAPTORRigid Risers are used to elevate sprinklers and sprays above ground level for maximum coverage. Screws directly into poly pipe.

Patented




10/Consumer Pack - RR Box MR/RRRRA2000 116833 25 100

Bulk MF/RRA200100 073419 100 2000

300MM RIGID RISER WITH ADAPTOR 10/Consumer Pack

- RR Box MR/RRRRA3000 116840 25 100

Bulk MF/RRA300100 073426 100 1000

5/Consumer Pack - RR Box MR/RRRRA4000 116895 20 80

10/Consumer Pack - RR Box MR/RRSTRP130 116987 10 40

Bulk MF/STRP13000 073341 20 400

19MM RIGID PIPE STAKE Stake Length = 200mm

5/Consumer Pack - RR Box MR/RRSTRP190 116994 10 40

Bulk MF/STRP19000 073358 20 300

5/Header Card - RR Box MR/RRSTR0400 116963 4 16

Bulk MF/STR040010 073006 10 100

400MM RIGID RISER WITH ADAPTOR

3 1 4 2 1 2 1 1 6 8 3 39

3 1 4 2 1 2 0 7 3 4 1 99

3 1 4 2 1 2 1 1 6 8 4 09

3 1 4 2 1 2 0 7 3 4 2 69

3 1 4 2 1 2 1 1 6 8 9 59

3 1 4 2 1 2 1 1 6 9 8 79

3 1 4 2 1 2 0 7 3 3 4 19

3 1 4 2 1 2 1 1 6 9 9 49

3 1 4 2 1 2 0 7 3 3 5 89

3 1 4 2 1 2 1 1 6 9 6 39

3 1 4 2 1 2 0 7 3 0 0 69


100

5MM INLET MINI SPRINKLER STAKE The ideal stake for mini sprinklers for use on large landscaped areas. Connects to 5mm flexible tube.Stake Length = 305mm

POT STAKEUsed in pot plants and planters to position and support drippers on the end of 4mm riser tube.Stake Length = 105mm

10/Consumer Pack - RR Box MR/RRSTP0400 116956 10 120

Bulk MF/STP040050 073020 50 2500

5/Header Card - RR Box MR/RRSTT0500 117113 6 24

Bulk MF/STT005010 073044 10 400

Bulk MF/STT010010 073051 10 400

13MM INLET MINI SPRINKLER STAKES Stake Length = 305mm

5/Header Card - RR Box MR/RRSTT0130 117106 6 24

Bulk MF/STT013010 073068 10 400

Bulk MF/STB130010 073013 10 400




10MM INLET MINI SPRINKLER STAKES Stake Length = 305mm

½” X 13MM THREADED STAKES

The ideal stake for mini sprinklers for use on large landscaped areas. Connects to 13mm poly pipe.Stake Length = 275mm

WEED MAT STAKEA universal stake that was developed to hold down weed matting and plastic sheet in plantations that have adopted an environmental alternative to pesticide.Stake Length = 130mm

10/Consumer Pack - RR Box MR/RRSTH1250 116949 10 80

Bulk MF/STH125020 071019 20 400

3 1 4 2 1 2 1 1 6 9 5 69

3 1 4 2 1 2 0 7 3 0 2 09

3 1 4 2 1 2 1 1 7 1 1 39

3 1 4 2 1 2 0 7 3 0 4 49

3 1 4 2 1 2 0 7 3 0 5 19

3 1 4 2 1 2 1 1 7 1 0 69

3 1 4 2 1 2 0 7 3 0 6 89

3 1 4 2 1 2 0 7 3 0 1 39

3 1 4 2 1 2 1 1 6 9 4 99

3 1 4 2 1 2 0 7 1 0 1 99


101

RISER JET & TUBE SETRiser jet stakes assembled with tube.




3/Header Card - RR Box MR/RRSTR04T0 116970 3 12

Bulk MF/STR04T000 073204 10 60

RISER JET STAKE SET TUBE & 360° SPRAY JET (BLACK)Riser jet stakes assembled with tube and a spray jet.Stake Length = 310mm Tube Length = 600mm Radius = 1.8m Flow Rate = 45Lph @ 150kPa

3/Header Card - RR Box MR/RRSTRTJFC 117045 3 12

Bulk MF/STR04TJFC 073211 10 60

RISER JET STAKE SET TUBE & 180° SPRAY JET (BLACK)Riser jet stakes assembled with tube and a spray jet.Stake Length = 310mm Tube Length = 600mm Radius = 1.8m Flow Rate = 45Lph @ 150kPa

3/Header Card- RR Box MR/RRSTRTJHC 117052 3 12

Bulk MF/STR04TJHC 073228 10 60

RISER JET STAKE SET TUBE & 360° SPRAY JET (BLUE)Riser jet stakes assembled with tube and a spray jet.Stake Length = 310mm Tube Length = 600mm Radius = 2.2m Flow Rate = 40Lph @ 150kPa

3/Header Card - RR Box MR/RRSTRT360 117038 4 16

Bulk MF/STR04T360 073235 10 60


Bulk MF/STR04T180 073242 10 60



Bulk MF/STR04T090 073259 10 60

RISER JET STAKE SET TUBE & 360° MICRO SPRINKLER (BLUE)Riser jet stakes assembled with tube and a micro sprinkler.Stake Length = 310mm Tube Length = 600mm Radius = 3.2m Flow Rate = 45Lph @ 150kPa


3/Header Card - RR Box MR/RRSTRTR10 117069 4 16

Bulk MF/STR04TR10 075086 10 60

3 1 4 2 1 2 1 1 6 9 7 09

3 1 4 2 1 2 0 7 3 2 0 49

3 1 4 2 1 2 1 1 7 0 4 59

3 1 4 2 1 2 0 7 3 2 1 19

3 1 4 2 1 2 1 1 7 0 5 29

3 1 4 2 1 2 0 7 3 2 2 89

3 1 4 2 1 2 1 1 7 0 3 89

3 1 4 2 1 2 0 7 3 2 3 59

3 1 4 2 1 2 1 1 7 0 2 19

3 1 4 2 1 2 0 7 3 2 4 29

3 1 4 2 1 2 1 1 7 0 1 49

3 1 4 2 1 2 0 7 3 2 5 99

3 1 4 2 1 2 1 1 7 0 6 99

3 1 4 2 1 2 0 7 5 0 8 69


102

5MM INLET MINI SPRINKLER STAKE SET & TUBEMini sprinkler stakes assembled with tube.Stake Length = 300mmTube Length = 600mm

RISER JET STAKE SET TUBE & 360° MICRO SPRINKLER (GREEN)Riser jet stakes assembled with tube micro sprinkler.Stake Length = 310mm Tube Length = 600mm





3/Header Card- RR Box MR/RRSTRTR13 117076 3 12

Bulk MF/STR04TR13 073266 10 60

RISER JET STAKE SET TUBE & 360° MICRO SPRINKLER (RED)Riser jet stakes assembled with tube micro sprinkler.Stake Length = 310mm Tube Length = 600mm


3/Header Card- RR Box MR/RRSTRTR15 117083 4 16

Bulk MF/STR04TR15 075093 10 60

3/Header Card- RR Box MR/RRSTTT050 117144 3 12

Bulk MF/STTT05010 073273 10 60

3 1 4 2 1 2 1 1 7 0 7 69

3 1 4 2 1 2 0 7 3 2 6 69

3 1 4 2 1 2 1 1 7 0 8 39

3 1 4 2 1 2 0 7 5 0 9 39

3 1 4 2 1 2 1 1 7 1 4 49

3 1 4 2 1 2 0 7 3 2 7 39

5MM INLET MINI SPRINKLER STAKE SET TUBE & 360° RED ROTOR RAIN Radius = 6.2m Flow Rate = 240Lph @ 150kPa


3 1 4 2 1 2 1 1 7 1 3 79

5MM INLET MINI SPRINKLER STAKE SET TUBE & 360° GREEN ROTOR RAINMini sprinkler stakes assembled with tube and Rotor Rain.Stake Length = 300mm Tube Length = 600mm



Bulk MF/STT005015 075239 10 60

3 1 4 2 1 2 1 1 7 1 2 09

3 1 4 2 1 2 0 7 5 2 3 99

5MM INLET MINI SPRINKLER STAKE SET TUBE & 360° BLUE ROTOR RAIN Radius = 4.6m Flow Rate = 125Lph @ 150kPa

Bulk MF/STT005017 075246 10 603 1 4 2 1 2 0 7 5 2 4 69

5MM INLET MINI SPRINKLER STAKE SET TUBE & 360° YELLOW ROTOR RAIN Radius = 5.5m Flow Rate = 183Lph @ 150kPa

Bulk MF/STT005020 075260 10 603 1 4 2 1 2 0 7 5 2 6 09

5MM INLET MINI SPRINKLER STAKE SET TUBE & 360° GREY ROTOR RAIN Radius = 5.3m Flow Rate = 153Lph @ 150kPa

3 1 4 2 1 2 0 7 5 2 5 39Bulk MF/STT005019 075253 10 60


103

STAKE, TUBE & 360° ANTI-ANT SPRINKLER SET NOZZLE 1.4MM

Anti-Ant feature prevents ants or other insects from blocking the nozzle and stopping the water flow. Supplied ready for connection directly into poly pipe.

Stake Length = 335mm Tube Length = 600mm

Radius = 6.0m Flow Rate = 91Lph @150kPa

3/Header Card- RR Box MR/RRSTRTSAA 117090 3 12

Bulk MF/STR04TSAA 073280 10 200

3 1 4 2 1 2 1 1 7 0 9 09

3 1 4 2 1 2 0 7 3 2 8 09

4MM GOOF REPAIR PLUGSRepairs and seals unwanted holes in poly pipe.

4MM THREAD JOINER Screws into 4mm rigid risers and poly tube.


4mm Fittings & Accessories

4MM BARB TEEUsed to branch 4mm tube in 3 directions.


10/Consumer Pack - RR Box MR/RRJ04T000 116383 20 240

Bulk MF/TJ0040100 072702 100 1800

4MM BARB JOINERJoins 4mm flexible tube to poly tube.

4MM BARB X THREAD JOINERAdapts 4mm rigid risers to 4mm flexible tube.

10/Consumer Pack - RR Box MR/RRJ04B000 116376 20 240

Bulk MF/J04000100 072719 100 1400

10/Consumer Pack - RR Box MR/RRJ04TB00 116390 20 240

Bulk MF/TA0040000 072696 100 1800

20/Consumer Pack - RR Box MR/RRP040000 116680 20 240

Bulk MF/P04000050 072757 50 1200


Bulk MF/T04000100 072726 100 1000

3 1 4 2 1 2 1 1 6 3 8 39

3 1 4 2 1 2 0 7 2 7 0 29

3 1 4 2 1 2 1 1 6 3 7 69

3 1 4 2 1 2 0 7 2 7 1 99

3 1 4 2 1 2 1 1 6 3 9 09

3 1 4 2 1 2 0 7 2 6 9 69

3 1 4 2 1 2 1 1 6 6 8 09

3 1 4 2 1 2 0 7 2 7 5 79

3 1 4 2 1 2 1 1 7 1 5 19

3 1 4 2 1 2 0 7 2 7 2 69


104

4MM IN-LINE VALVE THREAD/THREADUsed to isolate or regulate water supply.

3/Consumer Pack - RR Box MR/RRV04T000 117397 20 240

Bulk MF/V04000050 072764 50 1500

4MM BARB/BARB IN-LINE VALVEUsed to isolate or regulate water supply.

3/Consumer Pack - RR Box MR/RRV04B000 117380 20 240

Bulk MF/VB4000050 070753 50 1500




Bulk MF/VT4000050 070760 50 15004MM BARB/THREAD IN-LINE VALVEUsed to isolate or regulate water supply.

4MM SADDLE CLAMP WITH NAILUsed to attach 4mm tube neatly to fences and walls in garden areas.

4MM X ½“ BSP FEMALE MICRO SPRAY ADAPTOREnables 4mm micro sprays or sprinklers to be connected to the end of ½” male poly prop risers.


Bulk MF/PS0400100 072313 100 1400

3/Consumer Pack - RR Box MR/RRMA04000 116437 15 120

Bulk MF/MA0000004 072900 20 1500

3 1 4 2 1 2 1 1 7 3 9 79

3 1 4 2 1 2 0 7 2 7 6 49

3 1 4 2 1 2 1 1 7 3 8 09

3 1 4 2 1 2 0 7 0 7 5 39

3 1 4 2 1 2 0 7 0 7 6 09

3 1 4 2 1 2 1 1 6 7 3 49

3 1 4 2 1 2 0 7 2 3 1 39

3 1 4 2 1 2 1 1 6 4 3 79

3 1 4 2 1 2 0 7 2 9 0 09

4MM BARB CROSSUsed to branch 4mm tube in 4 directions.

5/Consumer Pack - RR Box MR/RRCR04000 116086 20 240

Bulk MF/CR0400050 072740 50 700

3 1 4 2 1 2 1 1 6 0 8 69

3 1 4 2 1 2 0 7 2 7 4 09

4MM BARB ELBOWUsed to create corners with 4mm tube.


Bulk MF/E04000050 072733 50 1400

3 1 4 2 1 2 1 1 6 2 7 79

3 1 4 2 1 2 0 7 2 7 3 39


105

4MM PUNCH SPANNERPunches holes in poly tube to attach 4mm fittings. Spanner used to insert and remove micro sprays in tubing. Hole in handle used to remove caps from two piece micro sprays for cleaning.

1/Consumer Pack - RR Box MR/RRACP0000 116000 20 240

Bulk MF/ACP000020 072771 20 800

3 1 4 2 1 2 1 1 6 0 0 09

3 1 4 2 1 2 0 7 2 7 7 19

5MM BARB TAKE-OFFJoins 5mm flexible tube to poly tube.

5MM/6MM BARB GOOF REPAIR PLUGSRepairs and seals unwanted holes in poly pipe.





Bulk MF/TO5000000 072511 100 1600

10/Consumer Pack - RR Box MR/RRP05000 116697 20 240

Bulk MF/P05000050 072412 50 700

6mm Fittings

Bulk MF/J06000050 070296 50 750

Bulk MF/RJ1306020 070173 20 800

Bulk MF/T06000050 072788 50 500

Bulk MF/RT1306020 070449 20 700

Bulk MF/E06000050 070289 50 750

Bulk MF/P05000050 072412 50 700

6MM BARB JOINER

13MM X 6MM BARB REDUCING JOINER

6MM BARB TEE

13MM X 6MM BARB REDUCING TEE

6MM BARB ELBOW

5/6MM BARB GOOF REPAIR PLUG

3 1 4 2 1 2 1 1 7 2 7 49

3 1 4 2 1 2 0 7 2 5 1 19

3 1 4 2 1 2 1 1 6 6 9 79

3 1 4 2 1 2 0 7 2 4 1 29

3 1 4 2 1 2 0 7 0 2 9 69

3 1 4 2 1 2 0 7 0 1 7 39

3 1 4 2 1 2 0 7 2 7 8 89

3 1 4 2 1 2 0 7 0 4 4 99

3 1 4 2 1 2 0 7 0 2 8 99

3 1 4 2 1 2 0 7 2 4 1 29

5mm Fittings


106

Tips for Water Efficient Irrigation

Always overlap sprays & sprinklers spray patterns evenly to ensure consistent water coverage.

Make sure that sprays, sprinklers & drippers do not water unnecessary areas including paths or building areas.

Use a Neta mechanical or electronic tap timer to control the time and the amount of water used for a water efficient garden.

Mulch garden beds and choose drippers to water the root zone directly and reduce water evaporation.

Give lawns a good soaking two to three times per week, rather than a light daily watering.

It is best to water at dusk or dawn to reduce water evaporation and maximise the amount of water that reaches the plants root zone.

Don’t mix drippers (suitable for low pressure) with sprinklers or sprays on the same line as they have different flow rates.

Don’t use too many drippers or sprays on one line as this will reduce performance.

Ensure your water supply has enough capacity to support your sprays or drippers. Check your water flow rate from the water supply using the 9L bucket test (Neta Irrigation Planner).

See our Irrigation Planner

Watering gardens at the right time of day, early morning or evening, reduces water loss through evaporation. Blustery weather will also lead to water loss, so avoid windy conditions, or install a drip system. Controlling outdoor water usage can be easy by installing a manual or electronic tap timer, allowing you to control whenand how much to water.

Features & BenefitsAdjustable patterns: adjustable arc, narrow strip, centre strip, 90°, 180°, 270° 360°Available in pop-up, impact, shrub adaptorIdeal for turf & lawn IrrigationComplements Neta’s micro irrigation range

Lawn

IrrigationNeta has a diverse range of Retail Ready irrigation products specifically designed for turf and lawn care. The range includes pop-up and impact sprinklers that have been designed to be hidden underground and water efficient at all times, while keeping lawns green year round. Neta sprinklers are a neat and effective way to provide an even spread of water to a lawn. They’ll also save time - no more shifting sprinklers, no more hand held hoses.

Shrub adaptors & NozzlesShrub adapters are more durable than typical micro sprays, risers and stakes and are ideal for use on professional landscape projects or in homes where extra resilience is required. Shrub adaptors mount onto ½” threaded risers and utilise the same nozzles as the spray head pop-up sprinklers and are mounted in an adaptor that can be screwed onto a ½” threaded riser.

Impact pop-up sprinklersImpact sprinklers are best suited to large lawns and in areas where noise is not an issue. They are robust and can handle dirty water from on-site dams or creeks. A single jet of water rotates to cover a circular pattern and the arc of the sprinkler can be changed from full to part circle rotation.

Spray head pop-up sprinklersSpray head pop-up sprinklers are the simplest sprinklers available in the range and are suitable for small to medium lawns. Water is sprayed out in various patterns as depicted by the sprinkler label selected. The nozzle can be rotated to align the pattern with the area being watered.


107

Tips for Water Efficient Irrigation

Always overlap sprays & sprinklers spray patterns evenly to ensure consistent water coverage.

Make sure that sprays, sprinklers & drippers do not water unnecessary areas including paths or building areas.

Use a Neta mechanical or electronic tap timer to control the time and the amount of water used for a water efficient garden.

Mulch garden beds and choose drippers to water the root zone directly and reduce water evaporation.

Give lawns a good soaking two to three times per week, rather than a light daily watering.

It is best to water at dusk or dawn to reduce water evaporation and maximise the amount of water that reaches the plants root zone.

Don’t mix drippers (suitable for low pressure) with sprinklers or sprays on the same line as they have different flow rates.

Don’t use too many drippers or sprays on one line as this will reduce performance.

Ensure your water supply has enough capacity to support your sprays or drippers. Check your water flow rate from the water supply using the 9L bucket test (Neta Irrigation Planner).

See our Irrigation Planner

Watering gardens at the right time of day, early morning or evening, reduces water loss through evaporation. Blustery weather will also lead to water loss, so avoid windy conditions, or install a drip system. Controlling outdoor water usage can be easy by installing a manual or electronic tap timer, allowing you to control whenand how much to water.

Efficient Irrigation


108

Sprinklers

Lawn Irrigation

50MM POP-UP SPRINKLER ADJUSTABLE ARC Adjustable throw radius up to 3.5m.

Labelled - RR Box MM/RRPU50ADJ 115140 10 120

Labelled - RR Box MM/RRPU50360 115133 10 12050MM POP-UP SPRINKLER 360° FULL CIRCLE

50MM POP-UP SPRINKLER 270° THREE-QUARTER CIRCLE

Labelled - RR Box MM/RRPU50270 115126 10 120

50MM POP-UP SPRINKLER 180° HALF CIRCLE


50MM POP-UP SPRINKLER 90° QUARTER CIRCLE


Labelled - RR Box MM/RRPU500CS 115096 10 120

50MM POP-UP SPRINKLER CENTRE STRIP

Labelled - RR Box MM/RRPU500NS 115102 10 120

50MM POP-UP SPRINKLER NARROW STRIP

Labelled - RR Box MM/RRPU50BOD 115157 10 120

50MM POP-UP SPRINKLER BODY ONLY

3 1 4 2 1 2 1 1 5 1 4 09

3 1 4 2 1 2 1 1 5 1 3 39

3 1 4 2 1 2 1 1 5 1 2 69

3 1 4 2 1 2 1 1 5 1 1 99

3 1 4 2 1 2 1 1 5 0 8 99

3 1 4 2 1 2 1 1 5 0 9 69

3 1 4 2 1 2 1 1 5 1 0 29

3 1 4 2 1 2 1 1 5 1 5 79

50mm Pop-Up Sprinklers


Pop-up spray head rises 50mm for lawn watering. Ideal for small lawn areas.


Pop-up spray head rises 100mm for lawn watering. Same nozzles and performance as the 50mm pop-up sprinklers. Pops up higher to clear long or thickly thatched grass.

100MM POP-UP SPRINKLER ADJUSTABLE ARC

Labelled - RR Box MM/RRPU10ADJ 115065 6 72

100MM POP-UP SPRINKLER 360° FULL CIRCLE


100MM POP-UP SPRINKLER 270° THREE-QUARTER CIRCLE


3 1 4 2 1 2 1 1 5 0 6 59

3 1 4 2 1 2 1 1 5 0 5 89

3 1 4 2 1 2 1 1 5 0 4 19


109

Lawn Irrigation

Sprinklers

100MM POP-UP SPRINKLER 180° HALF CIRCLE

SHRUB ADAPTOR ADJUSTABLE ARC NOZZLESpray nozzles screw directly onto ½” BSP male poly prop risers for use in landscape irrigation systems. Same nozzle as 50mm and 100mm pop-up sprinklers.



100MM POP-UP SPRINKLER 90° QUARTER CIRCLE


100MM POP-UP SPRINKLER CENTRE STRIP

Labelled - RR Box MM/RRPU100CS 115010 6 72

100MM POP-UP SPRINKLER NARROW STRIP

Labelled - RR Box MM/RRPU100NS 115027 6 72

100MM POP-UP SPRINKLER BODY ONLY

Labelled - RR Box MM/RRPU10BOD 115072 6 72

Labelled - RR Box MM/RRSN00ADJ 115287 30 360

SHRUB ADAPTOR 360° NOZZLE Labelled - RR Box MM/RRSN00360 115270 30 360



SHRUB ADAPTOR ONLYLabelled - RR Box MM/RRSAB0000 115232 30 360

Performance at 175kPa

Pattern Radius(m)

Flow(Lpm)

Adjustable Arc @ full circle

3.5 8.5

Full Circle 3.5 10.0

3/4 Circle 3.5 7.5

Performance at 175kPa

Pattern Radius(m)

Flow(Lpm)

1/2 Circle 3.5 5.0

1/4 Circle 3.5 3.0

Centre Strip 1.1 x 8.0 5.0

Narrow Strip 1.1 x 8.0 5.0

3 1 4 2 1 2 1 1 5 0 3 49

3 1 4 2 1 2 1 1 5 0 0 39

3 1 4 2 1 2 1 1 5 0 1 09

3 1 4 2 1 2 1 1 5 0 2 79

3 1 4 2 1 2 1 1 5 0 7 29

3 1 4 2 1 2 1 1 5 2 8 79

3 1 4 2 1 2 1 1 5 2 7 09

3 1 4 2 1 2 1 1 5 2 6 39

3 1 4 2 1 2 1 1 5 2 5 69

3 1 4 2 1 2 1 1 5 2 3 29

Pop-up spray head rises 100mm for lawn watering. Same nozzles and performance as the 50mm pop-up sprinklers. Pops up higher to clear long or thickly thatched grass.



110

ADJUSTABLE ARC NOZZLE WITH FILTERReplacement nozzle for Neta 50mm and 100mm pop-up sprinklers and Neta shrub adaptors.

Sprinklers

Lawn Irrigation


Labelled - RR Box MM/RRPUN0ADJ 115225 20 240

360° NOZZLE WITH FILTER Labelled - RR Box MM/RRPUN0360 115218 20 240




CENTRE STRIP NOZZLE WITH FILTER Labelled - RR Box MM/RRPUN00CS 115171 20 240

NARROW STRIP NOZZLE WITH FILTER Labelled - RR Box MM/RRPUN00NS 115188 20 240

METAL IMPACT SPRINKLER HEAD ½” BSP MALE INLET

Metal impact head with full or part circle adjustment. Covers circle of up to 23m diameter.Discharge at 175kPa is 11Lpm.

PLASTIC IMPACT SPRINKLER HEAD ½” BSP MALE INLET Plastic impact head with full or part circle adjustment. Covers circle of up to 23m diameter.Discharge at 175kPa is 11Lpm.

Labelled - RR Box MM/RRSMI0000 115249 10 80

Labelled - RR Box MM/RRSPI0000 115294 10 80

IMPACT POP-UP SPRINKLER

Plastic impact sprinkler pops up for lawn watering. 8 to 11.5m radius.Adjustable 0° to 360°.Discharge at 175kPa is 11Lpm.

1/Labelled MM/PUSIML000 078117 1 12

3 1 4 2 1 2 1 1 5 2 2 59

3 1 4 2 1 2 1 1 5 2 1 89

3 1 4 2 1 2 1 1 5 2 0 19

3 1 4 2 1 2 1 1 5 1 9 59

3 1 4 2 1 2 1 1 5 1 6 49

3 1 4 2 1 2 1 1 5 1 7 19

3 1 4 2 1 2 1 1 5 1 8 89

3 1 4 2 1 2 0 7 8 1 1 79

3 1 4 2 1 2 1 1 5 2 4 99

3 1 4 2 1 2 1 1 5 2 9 49


111

Lawn Irrigation

Sprinklers


Labelled - RR Box MM/RRSPRI000 115300 10 120ROTARY SPRINKLER HEAD ½” BSP FEMALE INLET Fast rotating head provides excellent water distribution. Covers circle of up to 12m diameter.Discharge at 175kPa is 10Lpm.

SLED BASE ¾“BSP FEMALE INLET X ½” BSP FEMALE OUTLET

Versatile plastic sprinkler base. Large footprint and added weights ensure superb stability.

1/Labelled MM/SPB000001 084408 10 40

Filter

Valve Boxes

1” DISC FILTER

Used to prevent blockages in drip and micro irrigation systems when not connected to town water.

1/Labelled MM/FIL025120 078193 1 20

MINI ROUND VALVE BOX - 160MM X 235MMUsed for underground valves in water reticulation systems. Lid provides easy access for maintenance and use.

1/Labelled MM/AVB150000 001757 1 ~

1/Labelled MM/AVBIL0000 007971 1 ~

1/Labelled MM/AVBIS0000 084200 1 ~

1/Labelled MM/AVBRECT01 008107 1 ~

1/Labelled MM/AVBIJ0000 007988 1 ~

LARGE ROUND VALVE BOX - 225MM X 250MM

STANDARD RECTANGULAR VALVE BOX - 385MM X 255MM X 305MM

STANDARD LOW PROFILE VALVE BOX WITH COVER - 385MM X 255MM X 165MM

JUMBO VALVE BOX - 350MM X 500MM X 300MM

3 1 4 2 1 2 1 1 5 3 0 09

3 1 4 2 1 2 0 8 4 4 0 89

3 1 4 2 1 2 0 7 8 1 9 39

3 1 4 2 1 2 0 0 1 7 5 79

3 1 4 2 1 2 0 0 7 9 7 19

3 1 4 2 1 2 0 8 4 2 0 09

3 1 4 2 1 2 0 0 8 1 0 79

3 1 4 2 1 2 0 0 7 9 8 89


112

QUICK COUPLING VALVE - ¾” BSP MALE INLET

Removes the need for unsightly taps. Prevents vandalism or waste from taps being left on.Quick coupling valves are connected to a water source and buried with the top flush with the ground.

QUICK COUPLING VALVE LID

Valves

Lawn Irrigation


1/Labelled MM/QCV075000 008176 1 50

RISER - ¾“BSP MALE OUTLET Risers, sometimes called keys, are connected to a hose. Flow starts as soon as the riser is inserted into the quick coupling valve.

QUICK COUPLING VALVE - 1” BSP MALE INLET 1/Labelled MM/QCV100000 008183 1 50

1/Labelled MM/QCR075000 015983 1 100

QUICK COUPLING VALVE SEAL

QUICK COUPLING VALVE PIN

1/Labelled MM/QCVA00LID 084040 1 ~

1/Labelled MM/QCVA0SEAL 084057 1 ~

1/Labelled MM/QCVA00PIN 084064 1 ~

3 1 4 2 1 2 0 0 8 1 7 69

3 1 4 2 1 2 0 0 8 1 8 39

3 1 4 2 1 2 0 1 5 9 8 39

3 1 4 2 1 2 0 8 4 0 4 09

3 1 4 2 1 2 0 8 4 0 5 79

3 1 4 2 1 2 0 8 4 0 6 49


113

Recycled WaterRecycled Water ...........................................................114


114

Recycled Water

SullDrip Integral Dripline - Purple

SULLDRIP INTEGRAL DRIPLINE - Purple

SIZE PRODUCT CODE EAN CODE9314212+

ORDER QTY

BUNDLE QTY

13mm ID x 2Lph 30cm spacing - 100m Coil

MD/LD1323100 419019 1 –

13mm ID x 2Lph PC 30cm spacing - 100m Coil

MD/LDP132310 419026 1 –

13mm ID x 2Lph PC60cm spacing - 100m Coil

MD/LDP132610 419033 1 –


MD/LDP134310 419057 1 –


MD/LDP134110 419040 1 –

Traditional unreinforced flexible PVC hose for distributing recycled water. Purple colour safely identifies use with reclaimed and recycled water. Made in Australia from UV stabilised material for long life. Suits micro irrigation barbed fittings. Maximum Operating Pressure 300kPa.

Sullage Hose


ORDER QTY

CTN QTY

19mm x 20m Coil GH/SH0019020 460400 1 5

25mm x 20m Coil GH/SH0025020 460370 1 1

PRESSURE RATING This poly pipe is capable of withstanding a working pressure of 300kPa (3 Bar) where temperatures of the pipe and water are nor more than 35˚C. If operating temperatures are more than this, the pressure rating of the pipe reduces as follows:

MANUFACTURED TO AUSTRALIAN STANDARDS AS2698-1 TYPE 30 OPERATING PRESSURE 300KPA

Poly tube with drippers pre-installed at set spacings. Ideal for narrow garden beds or large landscaped areas where drippers have been chosen to conserve water. Suitable for 13mm micro irrigation fittings.

LITRES PER HOUR (NOMINAL)

OPERATION PRESSURE

2Lph 100 KPa

4Lph 100 KPa

2Lph PC 250 KPa


115

Recycled Water

Fittings

DISTRIBUTION VALVES


ORDER QTY

CTN QTY

4 Outlet - Purple MM/DVL004404 009876 1 7

6 Outlet - Purple MM/DVL004606 009883 1 7

DISTRIBUTION VALVE CAMS SIZE PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

2 Zone – 4/6 Outlet MM/DV6107042 008572 1 –

3 Zone – 4 Outlet MM/DV6107043 008589 1 –

3 Zone – 6 Outlet MM/DV6107063 009456 1 –

4 Zone – 4 Outlet MM/DV6107044 008596 1 –

4 Zone – 6 Outlet MM/DV6107064 009463 1 –

5 Zone – 6 Outlet MM/DV6107065 009470 1 –

Lite Stem Disc MM/DV7005509 009869 1 –

Valve

Riser or Key

VALVE BOXES & PURPLE COVERS


ORDER QTY

CTN QTY

Mini Round with Purple Cover MM/VBIM0000L 008190 1 –

Purple Cover Only MM/VBIMLID0L 007940 1 –

Large Round with Purple Cover MM/VBIL0000L 008138 1 –

Purple Cover Only MM/VBILLID0L 008152 1 –

Standard Rectangular with Purple Cover MM/VBIS0000L 008145 1 –

Jumbo with Purple Cover MM/VBIJ0000L 007957 1 –

Purple Cover Only MM/VBIJLID0L 007964 1 –


ORDER QTY

CTN QTY

¾" Male BSP Quick Coupling Valvewith Purple Cap

MM/QCV0750LS 015952 1 50

1" Male BSP Quick Coupling Valvewith Purple Cap

MM/QCV1000LS 015976 1 50

3/4” Male BSP Quick Coupling Riser (to suit 1” & ¾” Q.C.V)

MM/QCR075000 015983 1 100

QUICK COUPLING VALVES & RISERS


116

RECYCLED WATER TAP ADAPTOR PLASTIC 25MM (1”) LH THREAD

Plastic tap adaptor fits 12mm click-on hose connectors and screws onto 1” tap outlets.

RECYCLED WATER BRASS TAP HANDLE 9.5MM DIAMETER TAP SPINDLE - 12 POINT SPLINE

Replacement key for purple recycled/reclaimed water taps in the event of loss.

Purple 12mm Tap Fittings

PACK TYPE PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

1/Blister Pack MH/RBTA04156 014726 10 100


ORDER QTY

CTN QTY

1/Blister Pack MH/RBFK04063 014764 10 100

DOME SPRINKLER 20MM (3/4”) RH THREAD

Gentle fountain spray. Die-cast zinc - powder coated. 9m diameter coverage. Suitable for use with recycled water.Discharge at 175kPa is 18.5Lpm.

Purple Sprinklers


ORDER QTY

CTN QTY

Labelled MH/ZSESS00LS 015969 12 72

Recycled Water

Greywater for Gardens

PURPLE GREYWATER PROPERTY SIGN 300MM X 200MM

Use property sign to clearly identify that greywater is being used.

Greywater SignsPACK TYPE PRODUCT CODE EAN CODE

9314212+ORDER

QTYCTN QTY

Labelled MH/GA0GWS001 013996 10 100


117

WaterSupplyRural PE Pipe Compression Fittings ........................... 118

Metric PE Pipe Compression Fittings .......................... 125

Metric Tapping Saddles ............................................. 133

Nylon Threaded Fittings ............................................ 136

Polypropylene Threaded Fittings ................................141

Threaded Risers ......................................................... 145

Valves ....................................................................... 150


118

Rural PE Pipe Compression Fittings & Tapping Saddles

The Neta NupiGeco StoryNeta and NupiGeco have harnessed their extensive resources, expertise and experience to bring to Australia the Neta NupiGeco range of PE pipe compression fittings and tapping saddles.

Neta and NupiGeco’s collective ‘know-how’, offers the expanding Australian polyethylene pipe market a new alternative for PE pipe fittings and tapping saddles at a level of service and on going customer support that will not let you down.

Manufactured to exact standards, using fully automated production systems and premium materials, the Neta NupiGeco Range of rural pipe fittings and tapping saddles have been specifically designed for the demanding Australian market and are ideal for use in the many diverse rural applications seen in stock watering and crop irrigation.

NupiGeco is a major, European manufacturer of pipe and fittings systems and commenced operations in Italy in the mid 1970’s. On-going investment in research and development of both products and production systems allows NupiGeco to provide the highest quality products and service.

Features: Easy conversion from Metric to Rural and back as the body of the fitting is interchangeable. The pipe ends do not need to be chamfered. All fittings are supplied individually barcoded for easy scanning. Body and nuts are manufactured from black UV stabilised virgin polypropylene for superior UV resistance.


119

Rural PE Pipe Compression Fittings


ORDER QTY

CTN QTY

¾” x ¾” PI/10KARUMAN34 303311 5 100

1” x 1” PI/10KARUMAN1 303328 5 75

1¼” x 1¼” PI/10KARUMAN114 303335 5 40

1½” x 1½” PI/10KARUMAN112 303342 1 25

2” x 2” PI/10KARUMAN2 303359 1 16

COUPLINGS

REDUCING COUPLINGS

MALE ADAPTORS(Pol x M BSP)


ORDER QTY

CTN QTY

1” x ¾” PI/10KARUMR134 303366 5 85

1¼” x 1” PI/10KARUMR1141 303373 5 100

1½” x 1¼” PI/10KARUMR112114 303380 1 30

2” x 1½” PI/10KARUMR2112 303397 1 18


ORDER QTY

CTN QTY

¾” x ½” PI/10KARURFM3412 303403 5 150

¾” x ¾” PI/10KARURFM3434 303410 5 180

1” x ¾” PI/10KARURFM134 303427 5 125

1” x 1” PI/10KARURFM11 303434 5 125

1¼” x 1” PI/10KARURFM1141 303441 5 75

1¼” x 1¼” PI/10KARURFM114114 303458 5 70

1½” x 1¼” PI/10KARURFM112114 303465 1 45

1½” x 1½” PI/10KARURFM112112 303472 1 45

2 x 1½” PI/10KARURFM2112 303489 1 30

2 x 2 PI/10KARURFM22 303496 1 25

Fittings

FEMALE ADAPTORS(Pol x F BSP)


ORDER QTY

CTN QTY

¾” x ½” PI/10KARURFF3412 303502 5 150

¾” x ¾” PI/10KARURFF3434 303519 5 150

1” x ¾” PI/10KARURFF134 303526 5 125

1” x 1” PI/10KARURFF11 303533 5 120

1¼” x 1” PI/10KARURFF1141 303540 5 70

1¼” x 1¼” PI/10KARURFF114114 303557 5 70

1½” x 1¼” PI/10KARURFF112114 303564 1 45

1½” x 1½” PI/10KARURFF112112 303571 1 45

2 x 1½” PI/10KARURFF2112 303588 1 25

2 x 2 PI/10KARURFF22 303595 1 25

Body, Nut & Tail Grip Ring Seals Bolts

Virgin Polypropylene Acetal Natural Rubber

Grade 304 Stainless Steel

Materials (Compression Fittings & Tapping Saddles)Neta rural fittings are suitable for use with all rural pipeAll male & female threads are BSP


120


END CAPS SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

¾” PI/10KARUTAPPO34 303601 5 200

1” PI/10KARUTAPPO1 303618 5 150

1¼” PI/10KARUTAPPO114 303625 5 160

1½” PI/10KARUTAPPO112 303632 1 50

2” PI/10KARUTAPPO2 303649 1 30

Fittings

TEES 90º SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

¾” x ¾” x ¾” PI/10KARUT34 303656 5 60

1” x 1” x 1” PI/10KARUT1 303663 2 40

1¼” x 1¼” x 1¼” PI/10KARUT114 303670 2 20

1½” x 1½” x 1½” PI/10KARUT112 303687 1 15

2” x 2” x 2” PI/10KARUT2 303694 1 9

REDUCING TEES 90º SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

1” x 1” x ¾” PI/10KARUTR1134 303700 2 80

1¼” x 1¼” x 1” PI/10KARUTR1141141 303717 2 25

1½” x 1½” x 1¼” PI/10KARUTR112112114 303724 1 15

2” x 2” x 1½” PI/10KARUTR22112 303731 1 10


ORDER QTY

CTN QTY

¾” x ¾” x ¾” PI/10KARUTM3434 303748 5 150

1” x 1” x ¾” PI/10KARUTM134 303755 2 100

1¼” x 1¼” x 1” PI/10KARUTM1141 303762 2 70

1½” x 1½” x 1¼” PI/10KARUTM112114 303779 1 18

2” x 2” x 1½” PI/10KARUTM2112 303786 1 12

TEES With Male Offtake(Pol x Pol x M BSP)


121


Fittings


ORDER QTY

CTN QTY

¾” x ¾” PI/10KARUG34 303908 5 100

1” x 1” PI/10KARUG1 303915 3 60

1¼” x 1¼” PI/10KARUG114 303922 3 39

1½” x 1½” PI/10KARUG112 303939 1 20

2” x 2” PI/10KARUG2 303946 1 12

ELBOWS 90º


ORDER QTY

CTN QTY

¾” x ¾” PI/10KARUGM3434 303953 5 250

1” x 1” PI/10KARUGM11 303960 3 90

ELBOWS With Male Offtake(Pol x M BSP)

ELBOWS With Female Offtake(Pol x F BSP)


ORDER QTY

CTN QTY

¾” x ½” PI/10KARUGF3412 303977 5 240

¾” x ¾” PI/10KARUGF3434 303984 5 120

1” x ¾” PI/10KARUGF134 303991 3 102

1” x 1” PI/10KARUGF11 304004 3 90

1¼” x 1” PI/10KARUGF1141 304011 3 54

1¼” x 1¼” PI/10KARUGF114114 304028 3 60

1½” x 1¼” PI/10KARUGF112114 304035 1 35

1½” x 1½” PI/10KARUGF112112 304042 1 30

2” x 1½” PI/10KARUGF2112 304059 1 24

2” x 2” PI/10KARUGF22 304066 1 20


ORDER QTY

CTN QTY

¾” x ¾” x ½” PI/10KARUTF3412 303793 5 80

¾” x ¾” x ¾” PI/10KARUTF3434 303809 5 70

1” x 1” x ½” PI/10KARUTF112 303816 2 50

1” x 1” x ¾” PI/10KARUTF134 303823 2 60

1” x 1” x 1” PI/10KARUTF11 303830 2 50

1¼” x 1¼” x 1” PI/10KARUTF1141 303847 2 30

1¼” x 1¼” x 1¼” PI/10KARUTF114114 303854 2 30

1½” x 1½” x 1¼” PI/10KARUTF112114 303861 1 18

1½” x 1½” x 1½” PI/10KARUTF112112 303878 1 16

2” x 2” x 1½” PI/10KARUTF2112 303885 1 12

2” x 2” x 2” PI/10KARUTF22 303892 1 12

TEES With Female Offtake(Pol x Pol x F BSP)


122

To convert one end of Neta rural pipe fitting to metric.


Fittings

CONVERSION KITS Rural to Metric


ORDER QTY

CTN QTY

¾” x 20mm PI/10KARUKIT34 304073 1 125

1” x 25mm PI/10KARUKIT1 304080 1 100

1¼” x 32mm PI/10KARUKIT114 304097 1 80

1½” x 40mm PI/10KARUKIT112 304103 1 65

2” x 50mm PI/10KARUKIT2 304110 1 40

WALL PLATE SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

1” Pipe x ¾” F BSP PI/10KARUOT134 304127 1 15

Note: Hand tighten fittings up to 1¼”. Use a strap wrench on larger fittings.

Compression Fitting Installation:1 Cut the pipe square and clean. Unscrew the nut and grip

ring and place over the pipe.Remove the insert tail and push it into the end of the pipe.2

Push the body over the insert tail and move the grip ring and nut up to the fitting.3 Screw the nut tightly onto the fitting.4

‘won’t pull apart’ The tapered profile on the grip rings forces the hard sharp teeth into the pipe.

‘easy to reuse’ Grip ring splits apart to enable the pipe to be removed easily. No more hassles when modifying pipe work.

‘won’t leak’ Extra long insert tail with raised barbs ensure a leak proof connection on rural pipe.

‘long lasting’ Body, nut and insert tail constructed from virgin UV stabilised polypropylene.

Benefits

Easy conversion from rural to metric and visa versa as the body of the fitting is interchangeable

The pipe ends do not need to be chamfered

All fittings are supplied individually barcoded for easy scanning

Features


123

All sizes 800kPaVirgin Polypropylene Body All Neta rural tapping saddles are supplied individually barcoded for easy scanning.

Durable construction from high grade polypropylene ensures long life, even under harsh conditions

Stainless steel reinforcement rings on the branch off-take prevent threads from stretching

Gasket seal provides a positive leak proof seal between the wall of the pipe and the tapping saddle

Constructed from virgin UV stabilised polypropylene.'long lasting'

Stainless steel reinforcing ring included on all threads.'positive thread'

Gasket seal ensures a perfect seal. Very forgiving of out of round pipe and surface imperfections.'positive seal'

Grade 304 stainless steel bolts suitable for underground use.'long lasting'

Easily assembled, bolts ‘click-lock’ into the body.'won’t fall apart'


For use with rural pipeAll threads are female BSP and come complete with stainless steel reinforcing ring (Grade 430)Grade 304 stainless steel bolts and nuts

Materials Pressure Rating Barcodes


ORDER QTY

CTN QTY

1” x ½” 2 bolts M8x40 PI/10KARUPS112 304134 1 100

1” x ¾” 2 bolts M8x40 PI/10KARUPS134 304141 1 100

1¼” x ½” 2 bolts M8x50 PI/10KARUPS11412 304158 1 70

1¼” x ¾” 2 bolts M8x50 PI/10KARUPS11434 304165 1 60

1¼” x 1” 2 bolts M8x50 PI/10KARUPS1141 304172 1 70

1½” x ½” 2 bolts M8x50 PI/10KARUPS11212 304189 1 60

1½” x ¾” 2 bolts M8x50 PI/10KARUPS11234 304196 1 60

1½” x 1” 2 bolts M8x50 PI/10KARUPS1121 304202 1 50

2” x ½” 4 bolts M8x50 PI/10KARUPS212 304219 1 40

2” x ¾” 4 bolts M8x50 PI/10KARUPS234 304226 1 40

2” x 1” 4 bolts M8x50 PI/10KARUPS21 304233 1 35

TAPPING SADDLES with Stainless Steel Bolts

Benefits Features

Tapping Saddles


124

Metric Pipe Compression Fittings & Tapping Saddles

Manufactured to exact standards, using fully automated production systems and premium materials, the Neta NupiGeco Range of metric pipe fittings and tapping saddles is used globally in market segments such as plumbing, heating, water supply, gas, irrigation, chemical and petrochemical.

All products come with WaterMark certification to AS/NZS4129:2000. NupiGeco is a major, European manufacturer of pipe and fittings systems and commenced operations in Italy in the mid 1970’s. On-going investment in research and development of both products and production systems allows NupiGeco to provide the highest quality products and service.

Thrust ring and lip seal are pressure locked into the body and won’t fall out during assembly, but remain easy to remove for cleaning or servicing.

'won’t fall apart'

Thrust ring compresses the lip seal to compensate for scratches on the pipe surface

and pipe ovality.

'won’t leak'

Lip seal – not just an ‘O’ ring. Allows for easy insertion of the pipe and improves seal performance. Foodsafe rubber (NBR).

'won’t leak'

Grip ring splits apart for easy removal of the pipe. No more

hassles in modifying pipe work.

'easy to reuse'

The tapered profile ensures a perfect mechanical seal on the piping system when the nut is tightened to the body.

'won’t pull apart'

All fittings supplied with black nuts for use with all pipe colours.

'versatile'

Production date code moulded into the bodyfor traceability.

'Quality assured'

Benefits:

FeaturesAll metric compression fittings have WaterMark product certification to AS/NZS4129:2000Meets the requirements for use in the plumbing and water supply marketsAll metric compression fittings have black nutsVersatile, suitable for use on PE pipe (AS/NZS4130) with various coloured stripes or jackets‘Lip seal’ – not just an ‘O’ ringImproved sealing performance when used with scratched or out-of-round pipeTapered grip ring profile ensures a perfect pipe to fitting mechanical seal – will not pull apartLip seal allows for easier insertion of pipe into fittingPipe ends do not need to be chamferedGrip rings split apart to enable removal from the pipeHassle free fitting reuse when modifying pipe work


125

AS/NZS 4129Lic21296

Neta Nupigeco metric pipe compression fittings have WaterMark product certification to AS/NZS4129:2000. This entails an independent audit of material selection, production and testing and is required for supply into the plumbing and water supply markets.

Metric PE Pipe Compression Fittings


ORDER QTY

CTN QTY

16mm x 16mm PJ/10KAMAN16 300716 5 170

20mm x 20mm PJ/10KAMAN20 300723 5 100

25mm x 25mm PJ/10KAMAN25 300730 5 75

32mm x 32mm PJ/10KAMAN32 300037 5 40

40mm x 40mm PJ/10KAMAN40 300747 1 25

50mm x 50mm PJ/10KAMAN50 300754 1 18

63mm x 63mm PJ/10KAMAN63 300761 1 10

75mm x 75mm PJ/10KAMAN75 300778 1 6

90mm x 90mm PJ/10KAMAN90 300785 1 4

110mm x 110mm PJ/10KAMAN110 300792 1 4

COUPLINGS

Fittings

16mm – 63mm PN1675mm - 110mm (except 4” BSP) PN10All 4” Fittings - PN6

Virgin Polypropylene BodyAcetal Grip RingsFood Safe Rubber Lip Seal

All Neta Nupigeco Metric Fittings are supplied individually barcoded for easy scanning.

Materials Pressure Rating Barcodes


ORDER QTY

CTN QTY

20mm x 16mm PJ/10KAR2016 300808 5 120

25mm x 20mm PJ/10KAR2520 300815 5 90

32mm x 25mm PJ/10KAR3225 300839 5 60

40mm x 25mm PJ/10KAR4025 300846 1 35

40mm x 32mm PJ/10KAR4032 300853 1 30

50mm x 32mm PJ/10KAR5032 300860 1 25

50mm x 40mm PJ/10KAR5040 300877 1 20

63mm x 50mm PJ/10KAR6350 300907 1 12

75mm x 63mm PJ/10KAR7563 300921 1 15

90mm x 63mm PJ/10KAR9063 300938 1 5

90mm x 75mm PJ/10KAR9075 300945 1 5

110mm x 90mm PJ/10KAR11090 300952 1 6

COUPLINGS REDUCING


ORDER QTY

CTN QTY

20mm x 20mm PJ/10KAMANRIP20 304240 5 90









REPAIR COUPLINGS


126


MALE ADAPTORS (Pol x M BSP)

Fittings


ORDER QTY

CTN QTY

16mm x ½” PJ/10KARFM1612 300105 5 250

16mm x ¾” PJ/10KARFM1634 300112 5 250

20mm x ½” PJ/10KARFM2012 300129 5 175

20mm x ¾” PJ/10KARFM2034 300136 5 180

25mm x ½” PJ/10KARFM2512 300143 5 125

25mm x ¾” PJ/10KARFM2534 300150 5 150

25mm x 1” PJ/10KARFM2510 300167 5 125

32mm x ¾” PJ/10KARFM3234 300181 5 75

32mm x 1” PJ/10KARFM3210 300198 5 75

32mm x 1¼” PJ/10KARFM32114 300204 5 75

40mm x 1” PJ/10KARFM4010 300211 1 45

40mm x 1¼” PJ/10KARFM40114 300228 1 45

40mm x 1½” PJ/10KARFM40112 300235 1 45

50mm x 1¼” PJ/10KARFM50114 300242 1 30

50mm x 1½” PJ/10KARFM50112 300259 1 33

50mm x 2” PJ/10KARFM5020 300266 1 30

63mm x 1½” PJ/10KARFM63112 300280 1 18

63mm x 2” PJ/10KARFM6320 300297 1 16

63mm x 2½” PJ/10KARFM63212 300303 1 15

75mm x 2” PJ/10KARFM7520 300310 1 12

75mm x 2½” PJ/10KARFM75212 300327 1 10

75mm x 3” PJ/10KARFM7530 300334 1 10

90mm x 2” PJ/10KARFM9020 300341 1 8

90mm x 3” PJ/10KARFM9030 300365 1 8

90mm x 4” PJ/10KARFM9040 300372 1 6

110mm x 3” PJ/10KARFM11030 300396 1 9

110mm x 4” PJ/10KARFM11040 300402 1 8


127

All threads 1¼" and upwards are supplied with stainless steel reinforcing rings (Grade 430).


FEMALE ADAPTORS (Pol x F BSP)

Fittings


ORDER QTY

CTN QTY

16mm x ½” PJ/10KARFF1612 300419 5 200

16mm x ¾” PJ/10KARFF1634 300426 5 225

20mm x ½” PJ/10KARFF2012 300433 5 150

20mm x ¾” PJ/10KARFF2034 300440 5 150

25mm x ½” PJ/10KARFF2512 300457 5 125

25mm x ¾” PJ/10KARFF2534 300464 5 130

25mm x 1” PJ/10KARFF2510 300471 5 125

32mm x ¾” PJ/10KARFF3234 300495 5 75

32mm x 1” PJ/10KARFF3210 300501 5 75

32mm x 1¼” PJ/10KARFF32114 300518 5 75

40mm x 1” PJ/10KARFF4010 300525 1 50

40mm x 1¼” PJ/10KARFF40114 300532 1 45

40mm x 1½” PJ/10KARFF40112 300549 1 45

50mm x 1¼” PJ/10KARFF50114 300556 1 30

50mm x 1½” PJ/10KARFF50112 300563 1 30

50mm x 2” PJ/10KARFF5020 300570 1 25

63mm x 1½” PJ/10KARFF63112 300587 1 18

63mm x 2” PJ/10KARFF6320 300594 1 16

75mm x 2” PJ/10KARFF7520 300617 1 12

75mm x 2½” PJ/10KARFF75212 300624 1 12

90mm x 2” PJ/10KARFF9020 300648 1 8

90mm x 3” PJ/10KARFF9030 300662 1 8

110mm x 3” PJ/10KARFF11030 300693 1 10

110mm x 4” PJ/10KARFF11040 300709 1 10


ORDER QTY

CTN QTY

16mm PJ/10KAT16 300969 5 90

20mm PJ/10KAT20 300976 5 60

25mm PJ/10KAT25 300983 2 40

32mm PJ/10KAT32 300068 2 24

40mm PJ/10KAT40 300990 1 15

50mm PJ/10KAT50 301003 1 10

63mm PJ/10KAT63 301010 1 6

75mm PJ/10KAT75 301027 1 6

90mm PJ/10KAT90 301034 1 4

110mm PJ/10KAT110 301041 1 2

TEES 90º


128


TEES - With Male Offtake(Pol x Pol x M BSP)

Fittings



ORDER QTY

CTN QTY

20mm x 20mm x ½” PJ/10KATM2012 301133 5 140

20mm x 20mm x ¾” PJ/10KATM2034 301140 5 150

25mm x 25mm x ½” PJ/10KATM2512 301157 2 100

25mm x 25mm x ¾” PJ/10KATM2534 301164 2 50

25mm x 25mm x 1” PJ/10KATM2510 301171 2 100

32mm x 32mm x ¾” PJ/10KATM3234 301195 1 34

32mm x 32mm x 1” PJ/10KATM3210 301201 1 30

40mm x 40mm x 1¼” PJ/10KATM40114 301232 1 20

50mm x 50mm x 1½” PJ/10KATM50112 301263 1 12

63mm x 63mm x 2” PJ/10KATM6320 301294 1 7

TEES - With Female Offtake(Pol x Pol x F BSP)


ORDER QTY

CTN QTY

16mm x 16mm x ½” PJ/10KATF1612 301379 5 120

16mm x 16mm x ¾” PJ/10KATF1634 301386 5 100

20mm x 20mm x ½” PJ/10KATF2012 301393 5 75

20mm x 20mm x ¾” PJ/10KATF2034 301409 5 80

25mm x 25mm x ½” PJ/10KATF2512 301416 2 56

25mm x 25mm x ¾” PJ/10KATF2534 301423 2 50

25mm x 25mm x 1” PJ/10KATF2510 301430 2 50

32mm x 32mm x ½” PJ/10KATF3212 301447 1 30

32mm x 32mm x ¾” PJ/10KATF3234 301454 1 30

32mm x 32mm x 1” PJ/10KATF3210 301461 1 36

32mm x 32mm x 1¼” PJ/10KATF32114 301478 1 30

40mm x 40mm x 1” PJ/10KATF4010 301485 1 20

40mm x 40mm x 1¼” PJ/10KATF40114 301492 1 20

40mm x 40mm x 1½” PJ/10KATF40112 301508 1 20

50mm x 50mm x 1¼” PJ/10KATF50114 301515 1 12

50mm x 50mm x 1½” PJ/10KATF50112 301522 1 12

50mm x 50mm x 2” PJ/10KATF5020 301539 1 12

63mm x 63mm x 1½” PJ/10KATF63112 301546 1 9

63mm x 63mm x 2” PJ/10KATF6320 301553 1 9

75mm x 75mm x 2½” PJ/10KATF75212 301584 1 4

90mm x 90mm x 3” PJ/10KATF9030 301614 1 5

110mm x 110mm x 4” PJ/10KATF11040 301638 1 3


129


REDUCING TEES 90º

Fittings


ORDER QTY

CTN QTY

25mm x 25mm x 20mm PJ/10KATR252025 301058 2 50

32mm x 32mm x 25mm PJ/10KATR322532 301065 2 30

40mm x 40mm x 32mm PJ/10KATR403240 301072 1 16

50mm x 50mm x 40mm PJ/10KATR504050 301089 1 10

63mm x 63mm x 50mm PJ/10KATR635063 301096 1 6

75mm x 75mm x 63mm PJ/10KATR756375 301102 1 9

ELBOWS 90º SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

16mm PJ/10KAG16 301645 5 150

20mm PJ/10KAG20 301652 5 100

25mm PJ/10KAG25 301669 3 60

32mm PJ/10KAG32 300006 3 45

40mm PJ/10KAG40 301676 1 22

50mm PJ/10KAG50 301683 1 14

63mm PJ/10KAG63 301690 1 9

75mm PJ/10KAG75 301706 1 10

90mm PJ/10KAG90 301713 1 3

110mm PJ/10KAG110 301720 1 4

ELBOW 90º - With Male Offtake(Pol x M BSP)


ORDER QTY

CTN QTY

16mm x ½” PJ/10KAGM1612 301744 5 400

20mm x ½” PJ/10KAGM2012 301751 5 150

20mm x ¾” PJ/10KAGM2034 301768 5 150

25mm x ½” PJ/10KAGM2512 301775 3 102

25mm x ¾” PJ/10KAGM2534 301782 3 102

25mm x 1” PJ/10KAGM2510 301799 3 90

32mm x 1” PJ/10KAGM3210 301829 1 60

40mm x 1¼” PJ/10KAGM40114 301850 1 35

40mm x 1½” PJ/10KAGM40112 301867 1 35

50mm x 1¼” PJ/10KAGM50114 301874 1 40

50mm x 1½” PJ/10KAGM50112 301881 1 20

63mm x 2” PJ/10KAGM6320 301911 1 12


130



ELBOWS - With Female Offtake(Pol x F BSP)

Fittings


ORDER QTY

CTN QTY

16mm x ½” PJ/10KAGF1612 301980 5 200

20mm x ½” PJ/10KAGF2012 301997 5 150

20mm x ¾” PJ/10KAGF2034 302000 5 120

25mm x ½” PJ/10KAGF2512 302017 3 105

25mm x ¾” PJ/10KAGF2534 302024 3 102

25mm x 1” PJ/10KAGF2510 302031 3 90

32mm x ½” PJ/10KAGF3212 302048 3 120

32mm x ¾” PJ/10KAGF3234 302055 3 60

32mm x 1” PJ/10KAGF3210 302062 3 60

32mm x 1¼” PJ/10KAGF32114 302079 3 54

40mm x 1” PJ/10KAGF4010 302086 1 35

40mm x 1¼” PJ/10KAGF40114 302093 1 70

40mm x 1½” PJ/10KAGF40112 302109 1 30

50mm x 1½” PJ/10KAGF50112 302123 1 25

50mm x 2” PJ/10KAGF5020 302130 1 20

63mm x 2” PJ/10KAGF6320 302154 1 14

75mm x 2½” PJ/10KAGF75212 302178 1 15

90mm x 3” PJ/10KAGF9030 302192 1 10

110mm x 4” PJ/10KAGF11040 302215 1 6

END CAPS SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

16mm PJ/10KATAPPO16 302222 5 500

20mm PJ/10KATAPPO20 302239 5 200

25mm PJ/10KATAPPO25 302246 5 125

32mm PJ/10KATAPPO32 302253 5 75

40mm PJ/10KATAPPO40 302260 1 50

50mm PJ/10KATAPPO50 302277 1 35

63mm PJ/10KATAPPO63 302284 1 18

75mm PJ/10KATAPPO75 302291 1 12

90mm PJ/10KATAPPO90 302307 1 8

110mm PJ/10KATAPPO110 302314 1 8

WALL PLATE SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

25mm Pipe x ¾” F BSP PI/10KAWP2534 304370 1 15


131

To convert one end of a poly fitting to suit copper pipe.

To convert one end of a metric fitting to Rural Pipe.


POLY TO COPPER COUPLINGS

Fittings


ORDER QTY

CTN QTY

16mm Poly x ½” Copper PJ/10KARAMAN1612 302482 1 100


20mm Poly x ¾” Copper PJ/10KARAMAN2034 302505 1 80


25mm Poly x ¾” Copper PJ/10KARAMAN2534 302529 1 75

32mm Poly x¾” Copper PJ/10KARAMAN3234 302536 1 55

POLY TO COPPER TEES SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

20mm Poly x ½” Copper PJ/10KARAT2012 302543 1 60

25mm Poly x ½” Copper PJ/10KARAT2512 302550 1 50

25mm Poly x ¾” Copper PJ/10KARAT2534 302567 1 40

POLY TO COPPER ELBOWS SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

20mm Poly x ½” Copper PJ/10KARAG2012 302574 1 90

25mm Poly x ½” Copper PJ/10KARAG2512 302581 1 75

25mm Poly x ¾” Copper PJ/10KARAG2534 302598 1 75

CONVERSION KITS POLY TO COPPER


ORDER QTY

CTN QTY

20mm Poly x ½” Copper PJ/10KARAKIT12 302604 1 50

25mm Poly x ¾” Copper PJ/10KARAKIT34 302611 1 40

32mm Poly x 1” Copper PJ/10KARAKIT1 302628 1 30

CONVERSION KITS METRIC TO RURAL PIPE


ORDER QTY

CTN QTY

20mm x ¾” PJ/10KAKIT020 302437 1 125

25mm x 1” PJ/10KAKIT025 302444 1 100

32mm x 1¼” PJ/10KAKIT032 302451 1 65

40mm x 1½” PJ/10KAKIT040 302468 1 45

50mm x 2” PJ/10KAKIT050 302475 1 40


132

Replaces the standard grip ring and seal for better chemical resistance.


C-PVC GRIP RINGS & VITON SEAL

Fittings


ORDER QTY

CTN QTY

20mm PJ/10KAPVCKIT020 302642 1 50

25mm PJ/10KAPVCKIT025 302659 1 50

32mm PJ/10KAPVCKIT032 302666 1 50

40mm PJ/10KAPVCKIT040 302673 1 80

50mm PJ/10KAPVCKIT050 302680 1 40

63mm PJ/10KAPVCKIT063 302697 1 30

75mm PJ/10KAPVCKIT075 302703 1 25

90mm PJ/10KAPVCKIT090 302710 1 15

110mm PJ/10KAPVCKIT110 302727 1 10

WRENCHES (Plastic) SIZE PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

25mm - 63mm PJ/00CKIT2563 611850 1 1


133

Metric Tapping Saddles

Virgin Polypropylene Body 16mm – 160mm (PNI0)

AS/NZS 4129Lic21296

Materials Pressure Rating

TAPPING SADDLES WITH STAINLESS STEEL BOLTS

Neta Nupigeco metric tapping saddles have WaterMark product certification to AS/NZS4129:2000. This entails an independent audit of material selection, production and testing and is required for supply into the plumbing and water supply markets.

SIZE BOLTS PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

25mm x ½” 2 - M6x25 PJ/10KAPSX2512 302734 1 150

25mm x ¾” 2 - M6x25 PJ/10KAPSX2534 302741 1 150

32mm x ½” 2 - M8x40 PJ/10KAPSX3212 302758 1 100

32mm x ¾” 2 - M8x40 PJ/10KAPSX3234 302765 1 100

32mm x 1” 2 - M8x40 PJ/10KAPSX3210 302772 1 100

40mm x ½” 2 - M8x50 PJ/10KAPSX4012 302789 1 70

40mm x ¾” 2 - M8x50 PJ/10KAPSX4034 302796 1 80

40mm x 1” 2 - M8x50 PJ/10KAPSX4010 302802 1 70

50mm x ½” 2 - M8x50 PJ/10KAPSX5012 302819 1 50

50mm x ¾” 2 - M8x50 PJ/10KAPSX5034 302826 1 100

50mm x 1” 2 - M8x50 PJ/10KAPSX5010 302833 1 50

50mm x 1¼” 2 - M8x50 PJ/10KAPSX50114 302840 1 50

63mm x ½” 4 - M8x50 PJ/10KAPSX6312 302857 1 70

63mm x ¾” 4 - M8x50 PJ/10KAPSX6334 302864 1 70

63mm x 1” 4 - M8x50 PJ/10KAPSX6310 302871 1 70

63mm x 1¼” 4 - M8x50 PJ/10KAPSX63114 302888 1 70

63mm x 1½” 4 - M8x50 PJ/10KAPSX63112 302895 1 40

75mm x ½” 4 - M8x50 PJ/10KAPSX7512 302901 1 ~

75mm x ¾” 4 - M8x50 PJ/10KAPSX7534 302918 1 45

75mm x 1” 4 - M8x50 PJ/10KAPSX7510 302925 1 40

75mm x 1¼” 4 - M8x50 PJ/10KAPSX75114 302932 1 40

75mm x 1½” 4 - M8x50 PJ/10KAPSX75112 302949 1 40

75mm x 2” 4 - M8x50 PJ/10KAPSX7520 302956 1 36

90mm x ½” 4 - M8x50 PJ/10KAPSX9012 302963 1 30

90mm x ¾” 4 - M8x50 PJ/10KAPSX9034 302970 1 30

90mm x 1” 4 - M8x50 PJ/10KAPSX9010 302987 1 30

90mm x 1¼” 4 - M8x50 PJ/10KAPSX90114 302994 1 30

90mm x 1½” 4 - M8x50 PJ/10KAPSX90112 303007 1 30

90mm x 2” 4 - M8x50 PJ/10KAPSX9020 303014 1 30

110mm x ½” 6 - M8x50 PJ/10KAPSX11012 303021 1 25

110mm x ¾” 6 - M8x50 PJ/10KAPSX11034 303038 1 25

110mm x 1” 6 - M8x50 PJ/10KAPSX11010 303045 1 25

110mm x 1¼” 6 - M8x50 PJ/10KAPSX110114 303052 1 25

110mm x 1½” 6 - M8x50 PJ/10KAPSX110112 303069 1 25

110mm x 2” 6 - M8x50 PJ/10KAPSX11020 303076 1 20

Saddles

Tapping Saddles


134

Metric Tapping Saddles

Saddles

SIZE BOLTS PRODUCT CODE EAN CODE8022207+

ORDER QTY

CTN QTY

125mm x ¾” 6 - M8x60 PJ/10KAPSX12534 303090 1 16

125mm x 1” 6 - M8x60 PJ/10KAPSX12510 303106 1 16

125mm x 1¼” 6 - M8x60 PJ/10KAPSX125114 303113 1 16

125mm x 1½” 6 - M8x60 PJ/10KAPSX125112 303120 1 16

125mm x 2” 6 - M8x60 PJ/10KAPSX12520 303137 1 15

140mm x 1” 6 - M8x60 PJ/10KAPSX14010 303175 1 12

140mm x 1¼” 6 - M8x60 PJ/10KAPSX140114 303182 1 12

140mm x 1½” 6 - M8x60 PJ/10KAPSX140112 303199 1 12

140mm x 2” 6 - M8x60 PJ/10KAPSX14020 303205 1 12

140mm x 3” 6 - M8x60 PJ/10KAPSX14030 303229 1 8

160mm x ½” 6 - M8x60 PJ/10KAPSX16012 303236 1 10

160mm x ¾” 6 - M8x50 PJ/10KAPSX16034 303243 1 16

160mm x 1” 6 - M8x60 PJ/10KAPSX16010 303250 1 10

160mm x 1¼” 6 - M8x60 PJ/10KAPSX160114 303267 1 10

160mm x 1½” 6 - M8x60 PJ/10KAPSX160112 303274 1 10

160mm x 2” 6 - M8x60 PJ/10KAPSX16020 303281 1 8

160mm x 3” 6 - M8x60 PJ/10KAPSX16030 303304 1 15

TAPPING SADDLES WITH STAINLESS STEEL BOLTS

Constructed from virgin UVstabilised polypropylene.

'long lasting'Stainless steel reinforcing ring

included on all threads.

'positive thread'

'O' ring.

'positive seal'

Grade 304 stainless steel bolts suitable for underground use.

'long lasting'

Easily assembled, bolts ‘click-lock’ into the body.

'won’t fall apart'

Benefits:


135

Threaded Fittings Range

Nylon Threaded Fittings

Neta’s comprehensive range of Nylon Threaded Fittings are manufactured from glass filled nylon. The BSP threads on this range of nipples, sockets, bushes, tees, elbows, plugs, caps, hose tails and tank inlets ensure a superior joint connection.

Nylon 6, 15% Glass filled provides excellent corrosion resistance at workingpressures up to 1600kPa.

All Nylon Threaded Fittings are individually barcoded for easy scanning

Maximum Working Pressure: • Thread sizes ½” to 2” – 1600kPa (PN16) @ 20° C • Thread sizes 3” & 4” – 1000kPa (PN10) @ 20° C

Features: • Made from tough virgin glass filled nylon (Nylon 6, 15% Glass filled) • UV stabilised, will not break down in sunlight • Tough threads, that won’t distort • Robust, strong and long lasting • Superior joint sealing • Non corrosive • Meets the requirements for potable water quality AS/NZS 4020 (Tests for analysing the suitability of products for use in contact with drinking water)

Typical Applications: • Plumbing, where AS/NZS4020 is a requirement • Reliable substitute for threaded metal fittings • High pressure piping systems • Marine installations

Polypropylene Threaded Fittings Neta’s extensive range of Polypropylene Threaded Fittings are manufactured from high grade polypropylene material. The BSP threads on this range of nipples, sockets, couplings, bushes, tees, elbows, plugs, caps and tank fittings allow for a secure joint connection.

Polypropylene provides excellent chemical and corrosion resistance at workingpressures up to 1000kPa.

All Polypropylene Threaded Fittings are individually barcoded for easy scanning

Maximum Working Pressure: • Thread sizes ½” to 3” – 1000kPa (PN10) @ 20° C

Features: • Manufactured from a high grade polypropylene material • UV stabilised, will not break down in sunlight • Resistance to a broad range of chemicals (Refer ISO/TR 10358 – 1993) • Non corrosive

Typical Applications:• Agricultural, commercial & urban irrigation systems• Suitable for use in low pressure installations• Marine installations


136

Made from a UV stabilised, glass filled nylon that is robust, strong and long-lasting. All fittings are individually barcoded for easy scanning.

Nylon 6, 15% glass filled ½" to 2" - 1600kPa (PN16) 3" to 4" - 1000kPa (PN10)


NIPPLES (MxM) Joins two female threaded compnents of the same size; ie valves to tees.

Fittings



ORDER QTY

CTN QTY

½” PN/N00050000 003809 10 1000

¾” PN/N00075000 003816 10 800

1” PN/N00100000 003823 10 450

1¼” PN/N00125000 003830 10 300

1½” PN/N00150000 003847 10 220

2” PN/N00200000 003854 10 140

3” PN/N00300000 032885 10 40

4” PN/N00400000 032892 10 30

REDUCING NIPPLES (MxM) Joins a female threaded fitting to a female connection of a smaller size.


ORDER QTY

CTN QTY

¾” x ½” PN/RN0075050 003311 10 850

1” x ½” PN/RN0100050 003366 10 500

1” x ¾” PN/RN0100075 003328 10 500

1¼” x ¾” PN/RN0125075 003373 10 350

1¼” x 1” PN/RN0125100 003335 10 350

1½” x ¾” PN/RN0150075 003380 10 300

1½” x 1” PN/RN0150100 003397 10 300

1½” x 1¼” PN/RN0150125 003342 10 200

2” x ¾” PN/RN0200075 003427 10 240

2” x 1” PN/RN0200100 003403 10 240

2” x 1¼” PN/RN0200125 003410 10 240

2” x 1½” PN/RN0200150 003359 10 200

3” x 2” PN/RN0300200 035480 10 108

4” x 2” PN/RN0400200 035497 10 48

4” x 3” PN/RN0400300 035527 10 48

BARREL UNIONS (FxF)


ORDER QTY

CTN QTY

¾” x ¾” PN/BU0075000 003559 1 120

1” x 1” PN/BU0100000 003566 1 120

1¼” x 1¼” PN/BU0125000 003573 1 60

1½” x 1½” PN/BU0150000 003580 1 60

2” x 2” PN/BU0200000 003597 1 70


137


SOCKETS (FxF) Joins two male threaded componenets of the same size; ie threaded pipe lengths.

Fittings


ORDER QTY

CTN QTY

½” PN/S00000050 003700 10 600

¾” PN/S00000075 003717 10 500

1” PN/S00000100 003724 10 400

1¼” PN/S00000125 003731 10 220

1½” PN/S00000150 003748 10 170

2” PN/S00000200 003755 10 110

REDUCING SOCKETS (FxF) Joins a male threaded fitting to a male connection of a smaller size.


ORDER QTY

CTN QTY

¾” x ½” PN/RS0075050 004202 10 600

1” x ½” PN/RS0100050 004219 10 500

1” x ¾” PN/RS0100075 004226 10 500

1¼” x ¾” PN/RS0125075 004233 10 300

1¼” x 1” PN/RS0125100 004240 10 300

1½” x ¾” PN/RS0150075 004257 10 250

1½” x 1” PN/RS0150100 004264 10 250

1½” x 1¼” PN/RS0150125 004271 10 250

2” x ¾” PN/RS0200075 004318 10 160

2” x 1” PN/RS0200100 004288 10 160

2” x 1¼” PN/RS0200125 004295 10 160

2” x 1½” PN/RS0200150 004301 10 160

BUSHES (MxF) Used to increase or reduce the size of a threaded fitting or a threaded pipe size.


ORDER QTY

CTN QTY

¾” x ½” PN/B00075050 003502 10 1600

1” x ½” PN/B00100050 003519 10 900

1” x ¾” PN/B00100075 003526 10 900

1¼” x ¾” PN/B00125075 003533 10 600

1¼” x 1” PN/B00125100 003540 10 600

1½” x ¾” PN/B00150075 003557 10 600

1½” x 1” PN/B00150100 003564 10 450

1½” x 1¼” PN/B00150125 003571 10 450

2” x ¾” PN/B00200075 003618 10 300

2” x 1” PN/B00200100 003588 10 300

2” x 1¼” PN/B00200125 003595 10 300

2” x 1½” PN/B00200150 003601 10 340

3” x 2” PN/B00300200 032861 10 120

4” x 2” PN/B00400200 035473 10 60

4” x 3” PN/B00400300 032878 10 60


138


THREADED TEES (FxFxF) Branch off-take to join three male fittings or threaded pipes of the same size.

Fittings


ORDER QTY

CTN QTY

½” x ½” x ½” PN/FTT050000 004653 5 500

¾” x ¾” x ¾” PN/FTT075000 004660 10 300

1” x 1” x 1” PN/FTT100000 004677 10 200

1¼” x 1¼” x 1¼” PN/FTT125000 004684 5 120

1½” x 1½” x 1½” PN/FTT150000 004691 5 100

2” x 2” x 2” PN/FTT200000 004707 2 52

3” x 3” x 3” PN/FTT300000 004530 – 20

4” x 4” x 4” PN/FTT400000 004349 – 10

THREADED ELBOWS (FxF) Line end take-off or a 90° corner joint for a male fitting or male threaded pipes.


ORDER QTY

CTN QTY

½” x ½” PN/FTE050000 004752 10 700

¾” x ¾” PN/FTE075000 004769 10 500

1” x 1” PN/FTE100000 004776 10 300

1¼” x 1¼” PN/FTE125000 004783 10 150

1½” x 1½” PN/FTE150000 004790 5 130

2” x 2” PN/FTE200000 004806 2 80

3” x 3” PN/FTE300000 004332 – 22

4” x 4” PN/FTE400000 004325 – 12

THREADED ELBOWS (MxF) Line end take-off or a 90° corner joint for a male fitting or male threaded pipes.


ORDER QTY

CTN QTY

½” x ½” PN/MFE050000 004851 10 900

¾” x ¾” PN/MFE075000 004868 10 600

1” x 1” PN/MFE100000 004875 10 350

1¼” x 1¼” PN/MFE125000 004882 10 200

1½” x 1½” PN/MFE150000 004899 5 150

2” x 2” PN/MFE200000 004905 2 80

PLUGS Used to seal off a female threaded pipe or fitting.


ORDER QTY

CTN QTY

½” PN/P00050000 003908 10 1500

¾” PN/P00075000 003915 10 1000

1” PN/P00100000 003922 10 750

1¼” PN/P00125000 003939 10 400

1½” PN/P00150000 003946 10 400

2” PN/P00200000 003953 10 240


139


CAPS & WASHER Female threaded fitting and washer to seal male threads in high pressure applications.

Fittings


ORDER QTY

CTN QTY

½” PN/C00050000 005001 10 1500

¾” PN/C00075000 005018 10 1200

1” PN/C00100000 005025 10 800

1¼” PN/C00125000 005032 10 500

1½” PN/C00150000 005049 10 350

2” PN/C00200000 005056 10 240

THREADED TANK INLETS Provides a sealed threaded inlet on a smooth walled tank or trough, M x F threaded.Note 2” male fitting has a left hand thread.


ORDER QTY

CTN QTY

½” PN/TTI005000 005117 5 120

¾” PN/TTI007500 005124 5 100

1” PN/TTI010000 005131 5 80

1¼” PN/TTI012500 005148 2 70

1½” PN/TTI015000 005155 2 60

2” (Left-hand Male Thread) PN/TTI020000 005162 2 50

TANK BACK NUTS A sealed outlet on a smooth walled tank; used to connect a flexible hose to a tank.


ORDER QTY

CTN QTY

½” PN/TTIBN0050 004479 10 120

¾” PN/TTIBN0075 004486 10 100

1” PN/TTIBN0100 004493 10 80

1¼” PN/TTIBN0125 004523 10 70

1½” PN/TTIBN0150 004509 10 60

2” (Left-hand) PN/TTIBN0200 004516 10 50

TANK WASHERS Replacement washer.


ORDER QTY

CTN QTY

½” PN/TTIW00050 004417 10 120

¾” PN/TTIW00075 004424 10 100

1” PN/TTIW00100 004431 10 80

1¼” PN/TTIW00125 004448 10 70

1½” PN/TTIW00150 004455 10 60

2” PN/TTIW00200 004462 10 50


140


HOSE TAILS Used to connect flexible hoses to a threaded pipe, threaded fitting or valve.

Fittings


ORDER QTY

CTN QTY

15mm barb x ½” BSP PN/HT0015050 004554 10 1500

20mm barb x ¾” BSP PN/HT0020075 004561 10 800

20mm barb x 1” BSP PN/HT0020100 037905 10 500

25mm barb x 1” BSP PN/HT0025100 004578 10 500

25mm barb x 1¼” BSP PN/HT0025125 003344 10 200

32mm barb x 1¼” BSP PN/HT0032125 004585 10 300

32mm barb x 1½” BSP PN/HT0032150 003351 10 120

40mm barb x 1½” BSP PN/HT0040150 004592 10 200

50mm barb x 2” BSP PN/HT0050200 004608 10 120

INSTALLATION TIPS• Use teflon tape or a sealant paste which is suitable for use on threads• When using a sealant paste, care should be taken to prevent over-tightening of the fitting• Sealant paste for use on threaded joints should be non-hardening and be suitable for use with plastics• Align the fitting to the job to prevent the possibility of cross-threading• Generally once the fitting is threaded to hand tight, then one to two extra turns is all that is normally required• Do not over tighten


141

Made from high grade UV stabilised polypropylene material. These fittings are non-corrosive and resistant to a broad range of chemicals. All fittings are individually barcoded for easy scanning. Contact national sales on 1300 771 134 to discuss all your special project needs.

Polypropylene 1000kPa - (PN10)

Polypropylene Threaded Fittings


NIPPLES (MxM) Joins two female threaded compnents of the same size; ie valves to tees.

Fittings


ORDER QTY

CTN QTY

½” x ½” PM/N00050000 230355 20 360

¾” x ¾” PM/N00075000 230362 20 600

1” x 1” PM/N00100000 230379 20 300

1¼” x 1¼” PM/N00125000 230386 10 400

1½” x 1½” PM/N00150000 230393 10 300

2” x 2” PM/N00200000 230409 10 200

REDUCING NIPPLES (MxM) Joins a female threaded fitting to a female connection of a smaller size.


ORDER QTY

CTN QTY

¾” x ½” PM/RN0075050 230539 20 700

1” x ¾” PM/RN0100075 230546 20 400

1¼” x 1” PM/RN0125100 230553 10 400

1½” x 1” PM/RN0150100 213549 10 400

1½” x 1¼” PM/RN0150125 230560 10 340

2” x 1½” PM/RN0200150 230591 10 180

SOCKETS(FxF) Joins two male threaded componenets of the same size; ie threaded pipe lengths.


ORDER QTY

CTN QTY

½” x ½” PM/S00050000 230652 20 400

¾” x ¾” PM/S00075000 230669 20 300

1” x 1” PM/S00100000 230676 20 300

1¼” x 1¼” PM/S00125000 230683 10 160

1½” x 1½” PM/S00150000 230690 10 160

2” x 2” PM/S00200000 230706 10 100

REDUCING SOCKETS(FxF) Joins a male threaded fitting to a male connection of a smaller size.


ORDER QTY

CTN QTY

¾” x ½” PM/RS0075050 230607 20 300

1” x ¾” PM/RS0100075 230614 20 200

1¼” x 1” PM/RS0125100 230621 10 250

1½” x 1¼” PM/RS0150125 230638 10 220

2” x 1½” PM/RS0200150 230645 10 140


142


REDUCING COUPLINGS (MxF)Use to reduce the size of a female threaded off-take, can also substitute for a bush.

Fittings


ORDER QTY

CTN QTY

¾” x ½” PM/RC0075050 230478 20 500

1” x ¾” PM/RC0100075 230485 10 300

1¼” x ¾” PM/RC0125075 230492 10 200

1¼” x 1” PM/RC0125100 230508 10 180

1½” x 1¼” PM/RC0150125 230515 10 300

2” x 1½” PM/RC0200150 230522 10 180

TANK FITTING WITH BACK NUTA sealed outlet on a smooth walled tank; used to connect a flexible hose to a tank.


ORDER QTY

CTN QTY

½” PM/TF0000050 004004 10 400

¾” PM/TF0000075 004011 10 250

1” PM/TF0000100 004028 10 200

1¼” PM/TF0000125 004035 10 120

1½” PM/TF0000150 004042 5 100

2” PM/TF0000200 004059 5 70

TANK FITTING WITH BACK NUT- White (Suitable for marine applications)A sealed outlet on a smooth walled tank; used to connect a flexible hose to a tank.


ORDER QTY

CTN QTY

½” PM/TFW000050 004066 5 400

¾” PM/TFW000075 004073 10 250

1” PM/TFW000100 004080 10 200

1¼” PM/TFW000125 004097 10 120

1½” PM/TFW000150 004103 10 100

2” PM/TFW000200 004110 5 70

BACK NUTS Replacement back nut.


ORDER QTY

CTNQTY

½” PM/HTBN00050 004356 10 1000

¾” PM/HTBN00075 004363 10 800

1” PM/HTBN00100 004370 10 450

1¼” PM/HTBN00125 004387 10 300

1½” PM/HTBN00150 004394 10 220

2” PM/HTBN00200 004400 10 140


143


BUSHES (MxF) Used to increase or reduce the size of a threaded fitting or a threaded pipe size.

Fittings


ORDER QTY

CTN QTY

¾” x ½” PM/B00075050 230003 20 300

1” x ½” PM/B00100050 230010 20 500

1” x ¾” PM/B00100075 230027 20 500

1¼” x ½” PM/B00125050 230126 10 250

1¼” x ¾” PM/B00125075 230034 10 250

1¼” x 1” PM/B00125100 230041 10 250

1½” x ¾” PM/B00150075 230058 10 200

1½” x 1” PM/B00150100 230065 10 200

1½” x 1¼” PM/B00150125 230072 10 200

2” x ¾” PM/B00200075 230089 10 140

2” x 1” PM/B00200100 230096 10 120

2” x 1¼” PM/B00200125 230102 10 120

2” x 1½” PM/B00200150 230119 10 120

2½” x 2” PM/B00250200 230157 10 60

3” x 2” PM/B00300200 230744 1 –

3” x 2½” PM/B00300250 230751 1 –

THREADED TEES (FxFxF) Branch off-take to join three male fittings or threaded pipes of the same size.


ORDER QTY

CTN QTY

½” x ½” x ½” PM/FTT050000 230294 10 250

¾” x ¾” x ¾” PM/FTT075000 230300 10 150

1” x 1” x 1” PM/FTT100000 230317 10 100

1¼” x 1¼” x 1¼” PM/FTT125000 230324 10 150

1½” x 1½” x 1½” PM/FTT150000 230331 10 100

2” x 2” x 2” PM/FTT200000 230348 10 40

THREADED ELBOWS (FxF) Line end take-off or a 90° corner joint for a male fitting or male threaded pipes.


ORDER QTY

CTN QTY

½” x ½” PM/FTE050000 230232 10 300

¾” x ¾” PM/FTE075000 230249 10 250

1” x 1” PM/FTE100000 230256 10 350

1¼” x 1¼” PM/FTE125000 230263 10 200

1½” x 1½” PM/FTE150000 230270 10 60

2” x 2” PM/FTE200000 230287 10 50


144


PLUGS Used to seal off a female threaded pipe or fitting.

Fittings


ORDER QTY

CTN QTY

½” PM/P00050000 230416 10 400

¾” PM/P00075000 230423 10 700

1” PM/P00100000 230430 10 500

1¼” PM/P00125000 230447 10 80

1½” PM/P00150000 230454 10 80

2” PM/P00200000 230461 10 120

CAPS Female threaded fitting used to seal off a male thread in low pressure applications.


ORDER QTY

CTN QTY

½” PM/C00050000 230171 10 320

¾” PM/C00075000 230188 10 600

1” PM/C00100000 230195 10 500

1¼” PM/C00125000 230201 10 350

1½” PM/C00150000 230218 10 160

2” PM/C00200000 230225 10 120

THREAD TAPE SIZE PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

12mm x 10m PM/TTW012000 230713 10 1000


145

THREADED RISERS

SIZE PRESSURE RATING

½” 1650kPa

¾” 1650kPa

1” 1650kPa

1¼” 1700kPa

1½” 1100kPa

2” 900kPa

Threaded Risers For Extra Reach

Neta threaded risers come in a variety of lengths and sizes that extend the reach and coverage of sprinklers such as pop-ups, impact sprinklers and shrub head sprinklers.

Manufactured in Australia from strong and durable UV stabilised polypropylene, all threads are BSP and are compatible with other metal or plastic BSP fittings. The BSP threads are made to exacting standards, guaranteeing easy assembly.

Features: All risers are supplied with a barcode label to take advantage of scanning at the checkout register

Bundles or bags are labelled with a trade unit barcode to help with stock control


146

RISER (MxF) ¾” M BSP X ½” F BSP


ORDER QTY

CTN QTY

150mm (6”) MP/RMF200150 242112 10 100

300mm (12”) MP/RMF200300 242129 10 200

450mm (18”) MP/RMF200450 242136 10 60

600mm (24”) MP/RMF200600 242143 10 100

750mm (30”) MP/RMF200750 242150 10 –

Threaded Risers

Threaded Ends - Male x Female

RISER (MxF) ½” M BSP X 3/8” F BSP

PACK PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

150mm (6”) MP/RMF150150 242013 10 150

300mm (12”) MP/RMF150300 242020 10 80

450mm (18”) MP/RMF150450 242037 10 100

600mm (24”) MP/RMF150600 242044 10 150

750mm (30”) MP/RMF150750 242051 10 –

900mm (36”) MP/RMF150900 242068 10 –


147

RISER (MxF) 1” M BSP X ¾” F BSP


ORDER QTY

CTN QTY

150mm (6”) MP/RMF250150 242211 10 240

300mm (12”) MP/RMF250300 242228 10 120

450mm (18”) MP/RMF250450 242235 10 40

600mm (24”) MP/RMF250600 242242 10 60

750mm (30”) MP/RMF250750 242259 10 –

900mm (36”) MP/RMF250900 242266 10 –

1200mm (48”) MP/RMF251200 242273 10 –

1500mm (60”) MP/RMF251500 242280 10 –

RISER (MxF) 1¼” M BSP X 1” F BSP


ORDER QTY

CTN QTY

150mm (6”) MP/RMF320150 242341 1 –

300mm (12”) MP/RMF320300 242310 1 80

450mm (18”) MP/RMF320450 242327 1 40

600mm (24”) MP/RMF320600 242334 1 40

Threaded Risers

Threaded Ends - Male x Male

RISER (MxM) ½” M BSP X ½” M BSP


ORDER QTY

CTN QTY

25mm (1”) MP/RMM150025 239419 10 100

50mm (2”) MP/RMM150050 239549 10 80

80mm MP/RMM150080 239433 10 60

100mm (4”) MP/RMM150100 239914 10 150

150mm (6”) MP/RMM150150 240019 10 150

200mm (8”) MP/RMM150200 240026 10 130

300mm (12”) MP/RMM150300 240040 10 80

450mm (18”) MP/RMM150450 240057 10 100

600mm (24”) MP/RMM150600 240064 10 150

750mm (30”) MP/RMM150750 240071 10 –

900mm (36”) MP/RMM150900 240088 10 –

1200mm (48”) MP/RMM151200 240095 10 –

Threaded Ends - Male x Female


148

Threaded Risers

RISER (MxM) 1” M BSP X 1” M BSP



ORDER QTY

CTN QTY

100mm (4”) MP/RMM250100 241535 10 150

150mm (6”) MP/RMM250150 240231 10 240

200mm (8”) MP/RMM250200 240804 10 180

300mm (12”) MP/RMM250300 240248 10 120

450mm (18”) MP/RMM250450 240255 10 40

600mm (24”) MP/RMM250600 240262 10 60

750mm (30”) MP/RMM250750 240279 10 –

900mm (36”) MP/RMM250900 240286 10 –

1200mm (48”) MP/RMM251200 240293 10 –

RISER (MxM) ¾” M BSP X ¾” M BSP


ORDER QTY

CTN QTY

50mm (2”) MP/RMM200050 239440 10 150

100mm (4”) MP/RMM200100 239389 10 150

150mm (6”) MP/RMM200150 240132 10 100

200mm (8”) MP/RMM200200 240705 10 150

300mm (12”) MP/RMM200300 240149 10 200

450mm (18”) MP/RMM200450 240156 10 60

600mm (24”) MP/RMM200600 240163 10 100

750mm (30”) MP/RMM200750 240170 10 –

900mm (36”) MP/RMM200900 240187 10 –

1200mm (48”) MP/RMM201200 240194 10 –


149

RISER (MxM) 1¼” M BSP X 1¼” M BSP


ORDER QTY

CTN QTY

150mm (6”) MP/RMM320150 239938 1 -

300mm (12”) MP/RMM320300 240330 1 80

450mm (18”) MP/RMM320450 240347 1 40

600mm (24”) MP/RMM320600 240354 1 40

900mm (36”) MP/RMM320900 239976 1 –

RISER (MxM) 1½” M BSP X 1½” M


ORDER QTY

CTN QTY

150mm (6”) MP/RMM400150 239907 1 60

300mm (12”) MP/RMM400300 240422 1 70

450mm (18”) MP/RMM400450 240439 1 21

600mm (24”) MP/RMM400600 240446 1 35

900mm (36”) MP/RMM400900 240378 1 –

Threaded Risers



ORDER QTY

CTN QTY

150mm (6”) MP/RMM500150 239754 1 -

300mm (12”) MP/RMM500300 240477 1 -

450mm (18”) MP/RMM500450 240484 1 15

600mm (24”) MP/RMM500600 240491 1 20

900mm (36”) MP/RMM500900 240576 1 –

RISER (MxM) 2” M BSP X 2” M BSP


150

Valves

Valves

FOOT VALVES- Female BSPMaximum Pressure 1600kPa (232 psi) @ 20°C Glass fibre reinforced nylon body, stainless steel spring, acetal plunger and nitrile rubber seals


ORDER QTY

CTN QTY

¾” (20mm) PV/FV0075000 003702 1 80

1” (25mm) PV/FV0100000 003719 1 70

1¼” (32mm) PV/FV0125000 003726 1 60

1½” (400mm) PV/FV0150000 003733 1 40

2” (50mm) PV/FV0200000 003740 1 25

CHECK VALVES- Female BSP (Non-Return Valves)

Maximum Pressure 1600kPa (232 psi) @ 20°C Glass fibre reinforced nylon body, stainless steel spring, acetal plunger and nitrile rubber seals


ORDER QTY

CTN QTY

½” (15mm) PV/CV0050000 007182 10 100

¾” (20mm) PV/CV0075000 003603 1 100

1” (25mm) PV/CV0100000 003610 1 80

1¼” (32mm) PV/CV0125000 003627 1 50

1½” (400mm) PV/CV0150000 003634 1 50

2” (50mm) PV/CV0200000 003641 1 35

FOOT VALVE SCREENS- Male BSP

Polypropylene BSP thread screens


ORDER QTY

CTN QTY

¾” (20mm) PV/FVS075000 003658 1 500

1” (25mm) PV/FVS100000 003665 1 400

1¼” (32mm) PV/FVS125000 003672 1 250

1½” (400mm) PV/FVS150000 003689 1 250

2” (50mm) PV/FVS200000 003696 1 170

AIR RELIEF VALVES ANKA SINGLE ACTION - FEMALE BSP


ORDER QTY

CTN QTY

1” (25mm) PV/ARV02500S 003764 1 80Glass fibre reinforced nylon body, acetal plunger and nitrile rubber seals


ORDER QTY

CTN QTY

1” (25mm) PV/ARV025000 213525 1 5

2” (50mm) PV/ARV050000 213532 1 5

AIR RELIEF VALVES UNIRAIN KINETIC DOUBLE ACTION - MALE BSP


151

Valves

Float Valves

NYLON SINGLE LEVER RESERVOIR VALVES


ORDER QTY

CTN QTY

32mm PV/RXRESV32SL 039976 1 –



Working Pressure 0 to 850kPa Supplied with 2 x 150mm ball floats & twin float connector

NYLON DUAL LEVER RESERVOIR VALVES


ORDER QTY

CTN QTY

32mm PV/RXRESV32DL 040002 1 –



Working Pressure 0 to 700kPa Supplied with 2 x 150mm ball floats.Central action for less frequent operation

NYLON TROUGH VALVES - Long Arm (310mm)


ORDER QTY

CTN QTY

20mm Standard Thread PV/RXPTV20 052500 1 100

20mm Long Thread PV/RXPTV20L 052524 1 90

25mm Standard Thread PV/RXPTV25 052517 1 90

25mm Long Thread PV/RXPTV25L 052531 1 90

Working Pressure 0 to 1000kPa (150mm ball float). Ball floats sold separately

NYLON TROUGH VALVES - Short Arm (170mm)


ORDER QTY

CTN QTY

20mm Long Thread PV/RXPTV20LSA 052555 1 100

25mm Long Thread PV/RXPTV25LSA 052579 1 100

Working Pressure 0 to 700kPa (115mm ball float). Ball floats sold separately

NYLON HIGH PRESSURETROUGH VALVES - Long Arm (270mm)


ORDER QTY

CTN QTY

15mm PV/RXTVHP15 052753 1 50

20mm PV/RXTVHP20 052777 1 60Working Pressure 0 to 1200kPa (150mm ball float). Ball floats sold separately

NYLON HIGH PRESSURETROUGH VALVES - Short Arm (160mm)


ORDER QTY

CTN QTY

15mm PV/RXTVHP15SA 052760 1 50

20mm PV/RXTVHP20SA 052784 1 50Working Pressure 0 to 1200kPa (115mm ball float). Ball floats sold separately


152

Valves

POLYPROPYLENESLEEVE VALVES

Float Valves

Working Pressure 0 to 1170kPa (170psi). Ball floats sold separately.


ORDER QTY

CTN QTY

¾” M BSP PV/VSP075000 201263 1 12

1” M BSP PV/VSP100000 201270 1 12

PLASTIC BALL FLOATS SIZE PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

4½” Float PV/VFP450000 201249 1 50

6” Float PV/VFP600000 201256 1 50

Ball Floats & Accessories

CORD AND NIPPLE SIZE PRODUCT CODE EAN CODE9314212+

ORDER QTY

CTN QTY

Sleeve Valve Cord (400mm) PV/VSPSVC000 201287 1 –


153

Azud FiltrationAzud Modular 100 Filters ........................................... 154


154

QUALITY CONVENTIONAL FILTRATION OPTION. AVAILABLE SIZES ¾" TO 2" BSP.

Features and Benefits: Simple construction

Body and cap with captured o-ring seal

Durable and corrosion-resistant Filter body and discs, manufactured from uv stabilised polypropylene

Easily disassembled for cleaning No tools required to remove the disc cartridge

130 micron disc element Higher filtration security to a similar sized screen filter

Chemical resistant Suitable for use with fertiliser injection systems

Typical Applications: Domestic & commercial micro irrigation systems

Commercial drip irrigation systems

Rural household pre-filtration

Recycled water systems

Control line protection

Product Specifications & Dimensions:

Filter SizeFlowRate

(Lpm)

MaximumPressure

(kPa)

SurfaceArea(cm2)

Disc Replacement Guide LengthXInlet / Outlet

Cartridge Type

Dimensions

BSP Thread DiscMicron

Diameter (mm)

Length (mm) (mm)

¾" 130 50 800 180 ¾" & 1" 48 156 185

1" 130 67 800 180 ¾" & 1" 48 156 190

1¼" 130 138 800 300 1¼" 68 180 231

1½" 130 270 800 525 1½" & 2" 90 225 231

2" 130 383 800 525 1 ½" & 2" 90 225 270

Note: Clean water flow rate @ 20kPa head loss – 130 micron

Note: Screen filters cannot be used in disc filter housings (the flow direction is different)

Disc Cartridge ¾" & 1"

Disc Filter Disc Cartridge 1¼"

Disc Cartridge 1½" & 2"

Azud Filtration

Azud Modular 100 Disc Filter Specifications

Length x

Flow


155

QUALITY CONVENTIONAL FILTRATION OPTION. AVAILABLE SIZES ¾" TO 2" BSP.

Features and Benefits: Simple construction

Body and cap with captured o-ring seal

Inlet flow diffuser Evenly distributes water along the full length of the cartridge

Easily disassembled for cleaning No tools required to remove the screen cartridge

Range of screen mesh sizes and Screen Cartridge Filtration grades are tailored to suit individual application

Drain valve (Optional) Allows partial screen flushing

Chemical resistance Suitable for use with fertiliser injection systems

Conform to ISO/DIS9912-1 Filter element resistance to buckling and tearing

Typical Applications: Domestic & commercial micro irrigation systems

Rural household pre-filtration

Recycled water systems

Rainwater tanks

Product Specifications & Dimensions:

Mesh Conversion Chart

Mesh 35 75 120 150

Micron 530 200 130 100

mm 0.53 0.20 0.13 0.10

Colour

Mesh: Number of holes per square inch

Micron: Diameter of the hole measured in microns

(1000microns = 1mm) Screen Cartridge

Flow

Filter SizeScreen Mesh Sizes Flow

Rate(Lpm)

Maximum Pressure

(kPa)

SurfaceArea(cm2)

Screen Replacement Guide LengthxInlet/Outlet

CartridgeType

Dimensions

BSP Thread Stainless Steel Diameter (mm)

Length (mm) (mm)

¾" n/a 75 120 150 62 800 160 ¾" & 1" 48 151 185

1" n/a 75 120 150 88 800 160 ¾" & 1" 48 151 190

1 ¼" 35 75 120 150 180 800 265 1¼" 68 173 231

1 ½" 35 75 120 150 333 800 485 1½" & 2" 90 220 231

2" 35 75 120 150 416 800 485 1½" & 2" 90 220 270

Note: Clean water flow rate @ 20kPa head loss – 120 mesh

Note: Disc filters cannot be used in screen filter housings (the flow direction is different)

Azud Filtration

Azud Modular 100 Screen Filter Specifications

Length x

Screen Filter


156

Flow

Flow

Azud Filtration

Azud Modular 100 Series Filters

THREADED DISC FILTERS

THREADED SCREEN FILTERS

Note: Screen filters cannot be used in disc filter housings (the flow direction is different)

Note: Disc filters cannot be used in screen filter housings (the flow direction is different)


ORDER QTY

CTN QTY

¾” 130 Micron FL/TDF075130 086006 1 60

1” 130 Micron FL/TDF100130 086013 1 60

1¼” 130 Micron FL/TDF125130 086020 1 25

1½” 130 Micron FL/TDF150130 086037 1 13

2” 130 Micron FL/TDF200130 086051 1 13


ORDER QTY

CTN QTY

¾” 75 Mesh S.S FL/TSF075075 086129 1 60

¾” 120 Mesh S.S FL/TSF075120 086136 1 60

¾” 150 Mesh S.S FL/TSF075150 086143 1 60

1” 75 Mesh S.S FL/TSF100075 086150 1 60

1” 120 Mesh S.S FL/TSF100120 086167 1 60

1” 150 Mesh S.S FL/TSF100150 086174 1 60

1¼” 35 Mesh S.S FL/TSF125035 086273 1 25

1¼” 75 Mesh S.S FL/TSF125075 086181 1 25

1¼” 120 Mesh S.S FL/TSF125120 086198 1 25

1¼” 150 Mesh S.S FL/TSF125150 086204 1 25

1½” 35 Mesh S.S FL/TSF150035 086280 1 13

1½” 75 Mesh S.S FL/TSF150075 086211 1 13

1½” 120 Mesh S.S FL/TSF150120 086228 1 13

1½” 150 Mesh S.S FL/TSF150150 086235 1 13

2” 35 Mesh S.S FL/TSF200035 086297 1 13

2” 75 Mesh S.S FL/TSF200075 086242 1 13

2” 120 Mesh S.S FL/TSF200120 086259 1 13

2” 150 Mesh S.S FL/TSF200150 086266 1 13


157


ORDER QTY

CTN QTY

¾” & 1” 130 Micron FL/TDC075130 086334 1 –

1¼” 130 Micron FL/TDC125130 086341 1 –

1½” & 2” 130 Micron FL/TDC150130 086358 1 –

SCREEN CARTRIDGES

Azud Filtration

Filter Size Filter Body Disc Cartridge Screen Cartridge

BSP Thread Inlet / Outlet OD x section OD x section OD x section

¾" 66.5mm x 4.0mm 48.5mm x 2.4mm 48.5mm x 2.4mm

1" 66.5mm x 4.0mm 48.5mm x 2.4mm 48.5mm x 2.4mm

1 ¼" 96.0mm x 4.5mm 69.5mm x 2.4mm 69.5mm x 2.4mm

1 ½" 121.5mm x 5.5mm 91.5mm x 2.4mm 91.5mm x 2.4mm

2" 121.5mm x 5.5mm 91.5mm x 2.4mm 91.5mm x 2.4mm

¾" & 1"1½" & 2"

1¼"

Azud Modular 100 Series Spare Parts & Accessories

DISC CARTRIDGES

VALVES ¾” THREAD- Screen cartridge filters only


ORDER QTY

CTN QTY

¾” & 1” 75 Mesh S.S FL/TSC075075 086396 1 –

¾” & 1” 120 Mesh S.S FL/TSC075120 086402 1 –

¾” & 1” 150 Mesh S.S FL/TSC075150 086419 1 –

1¼” 35 Mesh S.S FL/TSC125035 086303 1 –

1¼” 75 Mesh S.S FL/TSC125075 086426 1 –

1¼” 120 Mesh S.S FL/TSC125120 086433 1 –

1¼” 150 Mesh S.S FL/TSC125150 086440 1 –

1½” & 2” 35 Mesh S.S FL/TSC150035 086310 1 –

1½” & 2” 75 Mesh S.S FL/TSC150075 086457 1 –

1½” & 2” 120 Mesh S.S FL/TSC150120 086464 1 –

1½” & 2” 150 Mesh S.S FL/TSC150150 086471 1 –


ORDER QTY

CTN QTY

Filter Discharge Valve FL/FDV000000 079800 1 –

AZUD Filter Replacement O-Ring Size Chart


158

Featured Products

Retractable Hose Reel 15m & 20m

New Wave Hose Trolley

Portable Hose Reel Set

Sidewinder Hose Reel

Stainless Steel Hose Reel

Wall Mount Stainless Steel Hose Reel

Stainless Steel Hose Trolley

Adjustable Jet Gun

Multi Function Wand -

Long Reach

Shower Wand - Long Reach

Soft Spray Aluminium Wand -

Long Reach

Shower Wand - Easy Reach

Multi Function Wand -

Easy Reach

Triple Arm Sprinkler

16 Jet Oscillating Plastic Sprinkler

Impulse Sprinkler on Wheels

Extendable Tripod Base

16 Jet Oscillating Metal Sprinkler

2 Hour Soft Grip Tap Timer

Easy Dial One Zone Tap Timer

Easy Dial Two Zone Tap Timer

Brushed Aluminium Hose Hanger

Stainless Steel Hose Hanger

2 Hour Soft Grip Twin Tap Timer

Platinum KAT Elite 9-Pattern Gun

Elite Jet Gun

Adjustable Spray Gun

Elite Fan Spray Gun

Hose Fittings Set Chrome

Gutter Wand - Long Reach

Hose Reel Guide

Available in Retail Ready






159RGD Corporation - Ph 08 9358 1466 -Email [email protected]

product catalogue · 2016. 3. 10. · sprinklers 34 timers & water control 39 hose hangers,...

Documents