product catalogue 2015–16 - west coast · pdf filemodel: ranger 2006–2011 ......

HIGH PERFORMANCE

4WDCOMPONENTS

Rev 1.0, February 2015

2015–16Product Catalogue

Tel: +61 8 9378 2133 • Fax: +61 8 9378 2839Email: [email protected] • www.westcoastsuspensions.com.au188 Railway Parade, Bassendean WA 6054 • PO Box 398, Bassendean, Western Australia 6934

Phone: (08) 9378 2133 Fax: (08) 9378 2839 Email: [email protected] 1

Product Catalogue 2015-16

Table of Contents

© West Coast Suspensions 2015All rights reserved. No part of this publication may be reproduced or utilised in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval systems, without the prior written permission of the publishers.

DisclaimerThe preparation of this catalogue has been carried out with every care and attention, however, West Coast Suspensions accepts no responsibility for any possible errors or omissions. Pictures used in this catalogue are for illustration purposes only.

Daihatsu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Ford (Maverick see Nissan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

GVM upgrade for Ford Ranger/Mazda BT50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Great Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Holden / Isuzu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

GVM upgrade for Holden Colorado/Isuzu D-Max to 05/2012. . . . . . . . . . . . . . . 15

GVM upgrade for Holden Colorado/Isuzu D-Max from 06/2012 . . . . . . . . . . . . 17

Jeep / Chrysler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Land Rover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Mazda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

GVM upgrade for Ford Ranger/Mazda BT50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

GVM upgrade for Mitsubishi MN Triton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Nissan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

GVM upgrade for Nissan Patrol Cab Chassis GU . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

GVM upgrade for Nissan Navara D40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Suzuki . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Toyota . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

GVM upgrade for Toyota LandCruiser 79 Series V8 Cab Chassis . . . . . . . . . . . . 59

GVM upgrade for Toyota LandCruiser 76 Series V8 Wagon. . . . . . . . . . . . . . . . . 61

GVM upgrade for Toyota LandCruiser GX200 and GXL200 Wagon . . . . . . . . . 65

GVM upgrades for Toyota Hilux 150 Series KUN/GGN. . . . . . . . . . . . . . . . . . . . . . 71

Volkswagon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Coil Spring Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Shock Absorber Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Steering Damper Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

4WD Shackle Bush Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

4WD Suspension U-Bolt Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Leaf Spring Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Suspension Installation Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Warranty Assessment Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Warranty Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85


Phone: (08) 9378 2133 Fax: (08) 9378 2839 Email: [email protected]



Make: DAIHATSUModel: ROCKY HARDTOP, F70, F75, F80RV, F85RV

Description Location Qty Part Number No. of Leaves

Comments

Leaf Spring Front 2 DAT 03 6 Raised

Rear 2 DAT 04 5 + 1 Raised

MountsShock Absorber

Front 2 G36-5569 Leave tube out lower mount

Rear 2 G36-5569 Leave tube out lower mount

Bush Kit Front 1 UK 711

Rear 1 UK 710

U/Bolt Front 1 UB 659 Round Driver side Inner only

Front 3 UB 658 Round

Rear 4 UB 658 Round

Make: DAIHATSUModel: ROCKY TRAYBACK, F25, F55P, F77, F65


Comments

Leaf Spring Front 2 DAT 05 6 Raised

Front 2 DAT 03 6 F77 Tray back only

Rear 2 DAT 06 5 + 2 Raised


Front 2 G36-5560 Gas charged

Front 2 G36-5569 Leave tube out lower mount

Rear 2 G36-5593 Gas charged


Rear 1 UK 707

U/Bolt Front 1 UB 659 Round Driver side Inner only

Front 3 UB 658 RoundRear 4 UB 658 RoundRear 4 UB 437A Square F77 Tray back only



Make: DAIHATSUModel: FEROZA ‘88–’92, F300

Description Location Qty Part Number Length & Diameter

Comments

Torsion Bar Front 1 pair TB197 1093 mm26 mm ∅

No. of Leaves

Leaf Spring Rear 2 DAT 04 5 + 1 Raised



Rear 2 G36-5569 Leave tube out lower mount

Bush Kit Rear 1 UK 710

U/Bolt Rear 4 UB 658 Round



Make: DAIHATSUModel: FEROZA ‘92–5/98, F310, WIDE TRAC


Comments

Torsion Bar Front 1 pair TB197 1093 mm26 mm ∅

No. of Leaves

Leaf Spring Rear 2 DAT 10 5 + 1 OE Parabolic








Make: FORDModel: COURIER ’86–’06, 4WD


Comments

Torsion Bar Front 1 pair TB 1546 HD 927 mm27 mm ∅

No. of Leaves

Leaf Spring Rear 2 MAZD 01 5 + 2 Raised





Fixed Pin Rear 2 SP 794G

Shackle Rear 2 SK 386/1G Greasable




Make: FORDModel: RANGER 2006–2011


Comments

Torsion Bar Front 1 pair TB 1551 1024 mm27 mm ∅

No. of Leaves






Fixed Pin Rear 2 SP 385/1 Suits UK 769






Comments

Coil Spring Front 1 pair MAZD 100 Raised

Front 1 pair MAZD 100HD Raised H/Duty

No. of Leaves


Rear 2 MAZD 03GVM 5 + 2 GVM upgrade


Front 2 G38-5650 Strut Gas charged



Fixed Pin Rear 2 SP 385/1

Shackle Rear 2 SK 389G Greasable


Make: FORDModel: PX RANGER 4WD



Make: FORDModel: PX RANGER

3500kg GVM upgrade for Ford Ranger/Mazda BT50 —single, extra or dual cab

Part Number: MAZD 03GVMKWest Coast Suspension is now authorised to

supply and fi t a GVM suspension upgrade for

the current Ford Ranger/Mazda BT50 to 3500

kilograms GVM. This enables the operator to

legally carry 300 kg single cab, extra cab, or dual

cab over the factory stipulated 3200 kg GVM.

This kit has been engineer tested and certifi ed by

WA Department of Transport with approval number M148WA allowing the vehicle to attain a

legal GVM of 3500 kg.

Compliance with WA state requirementsThis suspension upgrade has been approved in WA by the WA Department of Transport.

Please be aware that some other GVM suspensions upgrades available on the market are

licensed in other states and do not necessarily comply with WA state requirements. Each GVM

suspension upgrade is issued with a black modifi cation compliance plate fi tted next to the

OEM compliance plate, stating vehicle particulars and approval number issued by Transport

WA.

The suspension kit consists of:

2 Heavy duty rear shocks

2 Heavy duty front struts

2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate

All relevant application and approval forms for vehicle particulars will be available from West

Coast Suspension staff at time of purchase.



Make: FORDModel: F250 4WD and 2WD 2000 on


Comments

No. of Leaves

Leaf Spring Front 2 FORD 29 7 40 mm lift

Front 2 FORD 31HD 7 90 mm lift

Rear 2 FORD 32 5 + 2 50 mm lift

Rear 2 FORD 33 5 + 2 90 mm lift


Front 2 G36-5600 Gas charged STD – 40 mm

Front 2 G36-5607 Gas charged 90 mm lift

Rear 2/4 G36-5603 Gas charged Twin or Quad

Bush Kit Front 4 3194 Shackle upper & lower

Front 2 3195 Fixed pin

Rear 4 3194 Shackle upper & lower

Rear 2 3195 Fixed pin

U/Bolt Front 4 UB 471 Square

Rear 4 UB 472 Round

Panhard Rod (adjustable)

Front 1 10-1014 Must be fi tted with 90mm Lift



Make: GREAT WALLModel: V 240 UTE


Comments

Torsion Bar Front 1 pair TB 1550 1142 mm 30 mm ∅

No. of Leaves

Leaf Spring Rear 2 HOL 02 4 + 2 Raised

Rear 2 HOL 02GVM 5 + 2 GVM upgrade







Rear 2 SK 386EXG Greasable extended





Comments


Coil Spring Rear 1 pair NIS 112 Raised H/Duty



Rear 2 G36-5563A Gas charged

Shock Boot Front 2 SB 01 Optional dust cover

Make: GREAT WALLModel: X 240 WAGON




Comments

Torsion Bar Front 1 pair TB 1546HD 927 mm27 mm ∅

1983–7/1988 models

Note: Check bar diameter and length

Front 1 pair TB 1547 1000 mm26 mm ∅

8/1988–2002 models


8/1988–2002 models

No. of Leaves






Bush Kit Rear 1 UK 728 8/1988 model on





Make: HOLDEN / ISUZUModel: RODEO KB to TF 1981–2002




Comments


No. of Leaves












Make: HOLDEN / ISUZUModel: RA RODEO / D-MAX > 6/2012 / COLORADO > 5/2012



Make: HOLDEN / ISUZUModel: RA RODEO / D-MAX > 6/2012 / COLORADO > 5/2012

3300 kg GVM upgrade for Isuzu D-Max / Holden Colorado (to 05/2012)—single, extra or dual cab

Part Number: HOL 02GVMKWest Coast Suspension is now authorised to

supply and fi t a GVM suspension upgrade for the

current Isuzu D-Max / Colorado to 3300 kilograms

GVM. This enables the operator to legally carry

400 kg over the factory stipulated GVM for single

cab, space cab and crew cab model.









WA.


4 Heavy duty shock absorbers

1 Pair H/D Torsion Bars

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate






Comments

Coil Spring Front 1 pair TPR 104 D-Max only

Front 1 pair HOL 103 Colorado only

Front 1 pair TPR 104HD D-Max only

Front 1 pair HOL 103HD Colorado only

No. of Leaves









U/Bolt Rear 4 UB 437A Square


Comments

Coil Spring Front 1 pair HOL 103 Colorado 7 only

Front 1 pair TPR 104 MU-X only

Rear 1 pair HOL 101 Raised




Make: HOLDEN / ISUZUModel: COLORADO 6/2012 on / D-MAX 7/2012 on

Make: HOLDEN / ISUZUModel: COLORADO 7 / MU-X



Make: HOLDEN / ISUZUModel: COLORADO / D-MAX 06/2012 model on

3300 kg GVM upgrade for Holden Colorado / Isuzu D-Max

Part Number: HOL 03GVMKWest Coast Suspension is now authorised to


the current Holden Colorado / Isuzu D-max to

3300 kilograms GVM. This enables the operator

to legally carry 200kg over the factory stipulated

GVM.

This kit has been engineer tested and certifi ed

by Department of Transport with approval number M148WA allowing the vehicle to attain a

legal GVM of 3300kg.






WA.



2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate

All relevant application, approval and WAVM (WA Vehicle Modifi cation) forms are available

from West Coast Suspension staff at time of order.



Make: HOLDEN / ISUZUModel: JACKAROO 5/1992 – 2004


Comments


‘92–’04 modelsCheck O.E. bar

length

Coil Spring Rear 1 pair HOL 101 Raised






Comments


Coil Spring Rear 1 pair NIS 112 Raised





Comments


Check O.E. bar length





Make: HOLDEN / ISUZUModel: FRONTERA UT 95–98

Make: HOLDENModel: FRONTERA UE 02/99–02




Comments

Coil Spring Front 1 pair JEEP 100 H/Duty Raised

No. of Leaves

Leaf Spring Rear 2 JEEP 02 5 Raised



Rear 2 G36-3236 Raised suspension only

Gas chargedSteering Damper

Front 1 SD 27H210




Comments

Coil Spring Front 1 pair JEEP 107 Petrol engine

Front 1 pair JEEP 107HD Diesel engine

Rear 1 pair JEEP 108 Raised




Make: JEEPModel: CHEROKEE SPORT/LIMITED/XJ

Make: JEEPModel: CHEROKEE KJ 09/01 on




Comments

Coil Spring Front 1 pair JEEP 101 Raised





Steering Damper

Front 1 SD 27H210


Comments

Coil Spring Front 1 pair JEEP 111 Petrol raised

Front 1 pair JEEP 112 Diesel Raised

Rear 1 pair JEEP 113 SWB raised

Rear 1 pair JEEP 114 LWB raised




Make: JEEPModel: WRANGLER TJ

Make: JEEPModel: WRANGLER JK 03/2007 on




Comments





Rear 2 G36-3207

Steering Damper

Front 1 SD 27H210

Make: JEEPModel: GRAND CHEROKEE ZG–ZJ and WRANGLER


Comments






Steering Damper

Front 1 SD 27H210

Make: JEEPModel: GRAND CHEROKEE WJ and WG




Comments

Coil Spring Front 1 pair LAN 106 Raised

Rear 1 pair LAN 112 Range Rover Raised

Rear 1 pair LAN 113 DiscoveryRaised

Rear 1 pair LAN 113HD Raised H/DutyMounts

Shock Absorber



Steering Damper

Front 1 SD 4011

Make: LAND ROVERModel: DISCOVERY to 2/1999 / RANGE ROVER up to 1995


Comments


Rear 1 pair LAN 113 Raised

Rear 1 pair LAN 113HD Raised H/Duty




Steering Damper

Front 1 SD4012

Make: LAND ROVERModel: DISCOVERY SERIES 2, TD5, 3/1999-2004




Comments


Rear 1 pair LAN 102 Raised




Steering Damper

Front 1 SD 25H2700

Make: LAND ROVERModel: DEFENDER 110


Comments


Rear 1 pair LAN 102HD Raised




Steering Damper

Front 1 SD 25H2700

Make: LAND ROVERModel: DEFENDER 130




Comments


No. of Leaves






Fixed Pin Rear 2 SP 794G



Make: MAZDAModel: B2600 ‘86–’06




Comments


No. of Leaves









Make: MAZDAModel: BT50 4WD 2006 –10/2011




Comments

Coil Spring Front 1 pair MAZD 100 Raised

Front 1 pair MAZD 100HD Raised H/Duty

No. of Leaves


Rear 2 MAZD 03GVM 5 + 2 GVM upgrade








Make: MAZDAModel: BT50 4WD 10/2011 on



Make: MAZDAModel: BT50 – 10/2011 on

3500kg GVM upgrade for Ford Ranger / Mazda BT50 —single, extra or dual cab

Part Number: MAZD 03GVMKWest Coast Suspension is now authorised to


the current Ford Ranger/Mazda BT50 to 3500

kilograms GVM. This enables the operator to

legally carry 300 kg single cab, extra cab, or dual

cab over the factory stipulated 3200 kg GVM.









WA.


2 Heavy duty rear shocks

2 Heavy duty front struts

2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate






Comments

Torsion BarNote: Check bar diameter and length


NA, NB, NC, ND, NE, NG

Front 1 pair TB 203 1307 mm27.5 mm

∅

6 CYL. and TDINH, NJ

No. of Leaves

Leaf Spring Rear 2 MITS 30 4 + 1 NH–NJ ‘91–’96SWB NA–NG

‘83–’91Rear 2 MITS 31 4 + 1 LWB NA–NG

‘83–’91Mounts

Shock Absorber

Front 2 G36-5530 To 4/1991Gas charged

Front 2 G36-5535 4/1991 onGas charged



Shackle Rear 2 SK 795 Non greasable with bushes

Rear 2 SK 795G Greasable


Make: MITSUBISHIModel: PAJERO SWB and LWB 1983–1996




Comments

Torsion BarNote: Check bar diameter and length


NF–NG


∅

NH–NL

Coil Spring Rear 1 pair MIT 102 SWB RaisedRear 1 pair MIT 101 LWB RaisedRear 1 pair MIT 101HD LWB H/Duty

Raised


Front 2 G36-5530 To 4/1991Gas charged

Front 2 G36-5535 4/1991 onGas charged

Rear 2 G36-5597 To 4/1991Gas charged

Rear 2 G36-5580 5/1991 on Gas charged

Make: MITSUBISHIModel: PAJERO SWB and LWB 1988–2000


Comments

Coil Spring Front 1 pair MIT 100 Petrol

Front 1 pair MIT 100HD Diesel

Rear 1 pair MIT 103 LWB

Rear 1 pair MIT 106 SWB




Make: MITSUBISHIModel: PAJERO NM, NP, NS, NT




Comments


1985–1992 ME–MH


1993–1997 MJ

Note: Check bar diameter and length


∅

1997 on MK

No. of Leaves

Leaf Spring Rear 2 MITS 32 4 + 1 Raised


Front 2 G36-5530 To 11/1996 ME, MH, MJ Gas

chargedFront 2 G36-5535 11/1996 on MK

Gas charged


Steering Damper

Front 1 SD 4022 10/1987–5/1992


Shackle Rear 2 SK 795 Non greasable with brushes



Make: MITSUBISHIModel: TRITON 4WD ME, MF, MG, MH, MJ, MK




Comments

Coil Spring Front 1 pair MIT 109 Raised

Front 1 pair MIT 109HD Raised heavy-duty

No. of Leaves

Leaf Spring Rear 2 MITS 33 5 + 2 Raised




Steering Damper

Front 1


Shackle Rear 2 SK 795 Non greasable with bushes


U/Bolt Rear 4 UB 474 Ø 12mm Square

Check Diameter

Rear 4 UB464 Ø 14mm Square

2012 onwards

Make: MITSUBISHIModel: TRITON 4WD ML and MN



Make: MITSUBISHIModel: MN TRITON

3300 kg GVM upgrade for Mitsubishi MN Triton

Part Number: MITS 33GVMKWest Coast Suspension is now authorised to


current Mitsubishi MN Triton to 3300 kilograms


400 kg over the factory stipulated GVM.


Department of Transport with approval number

M148WA allowing the vehicle to attain a legal

GVM of 3300 kg.






WA.



2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate

All relevant application, approval and WAVM (WA Vehicle Modifi cation) forms are available

from

West Coast Suspension staff at time of order.




Comments

Torsion Bar Front 1 pair TB 203 1307 mm27.5 mm

∅

Coil Spring Rear 1 pair MIT 105 6/2000 on





Comments

Coil Spring Front 1 pair MIT 109 RaisedFront 1 pair MIT 109HD Heavy dutyRear 1 pair MIT 102 RaisedRear 1 pair MIT 101 Heavy duty




Make: MITSUBISHIModel: CHALLENGER PA SERIES 2 8/2000–3/2007

Make: MITSUBISHIModel: CHALLENGER PB, PC 12/2009 ON




Comments

Leaf Spring Front 2 NIS 05 7 LWB

Front 2 NIS 05-6 6 SWB

Rear 2 NIS 04 7 SWB and LWBSWB requires

reworkMounts

Shock Absorber

Front 2 GAS 2080 Gas charged

Rear 2 GAS 2076 Gas charged

Steering Damper

Front 1 SD 4022


Rear 1 UK 722

Fixed Pin Front 2 SP 470G Greasable

Rear 2 SP 470G Greasable

Shackle Front 2 SK 665G Greasable Must use with

NIS 05Rear 2 SK 664

U/Bolt Front 2 UB 451 Round Near side

Front 2 UB 452 Square Driver side

Rear 4 UB 453 Round

Make: NISSANModel: MQ SWB and LWB




Comments

Leaf Spring Front 2 NIS 05 7 LWB

Front 2 NIS 05-6 6 SWB

Rear 2 NIS 04 7 SWB and LWBSWB requires

reworkMounts

Shock Absorber

Front 2 GAS 2080 Gas charged

Rear 2 GAS 2076 Gas charged

Steering Damper

Front 1 SD 4022


Rear 1 UK 722



Shackle Front 2 SK 665G Greasable

Rear 2 SK 664

U/Bolt Front 2 UB 451 Round Near side

Front 2 UB 452 Square Driver side

Rear 4 UB 453 Round

Make: NISSANModel: MK SWB and LWB




Comments

Leaf Spring Front 2 NIS 11 7 Raised

Rear 2 NIS 12 7 + 2 Raised

Rear 2 NIS 12P 2 + 1 Parabolic

Rear 2 NIS 15 7 + 2 GVM upgrade




Steering Damper

Front 1 SD 4022


Rear 1 UK 719





Front 1 SK 353LHG Anti-inversion Must fi t in pairs

Front 1 SK 353RHG

Rear 1 SK 353LHG Anti-inversion Must fi t in pairs

Rear 1 SK 353RHG


Rear 4 UB 670 Round

Make: NISSAN / FORDModel: PATROL / MAVERICK GQ LWB Y60 C/C Leaf Spring




Comments

Coil Spring Front 1 pair NIS 100 Raised

Front 1 pair NIS 101 Raised H/Duty*

Rear 1 pair NIS 113 Raised

Rear 1 pair NIS 114 Raised H/Duty*



Front 2 G 2491L H/Duty Hydraulic


Rear 2 G 2492L H/Duty Hydraulic

Steering Damper

Front 1 SD 4034 To 8/1989

Front 1 SD 4036 8/1989 on

Castor Bush Kit

Front 1 10-1004 Castor Correction Kit

*Gearbox Spacer

1 10-1005 Required for raised suspension

Make: NISSAN / FORDModel: PATROL / MAVERICK GQ SWB Y60


Comments


Front 1 pair NIS 101HD Raised H/Duty

Rear 1 pair NIS 114 Raised

Rear 1 pair NIS 114HD Raised H/Duty

Rear 1 pair NIS 109 Raised progressive






Steering Damper

Front 1 SD 4034 To 8/1989

Front 1 SD 4036 8/1989 on

Castor Bush Kit

Front 1 10-1004 Castor Correction Kit

Make: NISSAN / FORDModel: PATROL / MAVERICK GQ LWB Y60 (WAGON)




Comments



Rear 1 pair NIS 114HD Raised

Rear 1 pair NIS 111 Raised H/Duty

Rear 1 pair NIS 114EHD Raised Extra H/Duty






Steering Damper

Front 1 SD 4036

Castor Bush Kit

Front 1 10-1004 CastorCorrection Kit

Make: NISSAN / FORDModel: PATROL / MAVERICK GQ LWB Y60 (CAB CHASSIS)




Comments

Coil Spring Front 1 pair NIS 101HL3 Hi-lift

Rear 1 pair NIS 114HL3 Hi-lift


Front 2 G40-5546 WCS Big Bore

Rear 2 G40-5548 WCS Big Bore

Steering Damper

Front 1 SD 4034 GQ 88 > 8/1989Front 1 SD 4036 GQ 9/1989 onFront 1 SD 4011 GU to 1/2000Front 1 SD 4501 GU 2/2000 on

Panhard Rod (adjustable)

Front 1 10-1048 GQ all, GU pre-4/2000

Front 1 10-1050 GU series 2 – 4/2000 on

Rear 1 10-1049 GQ all,GU pre-4/2000

Rear 1 10-1051 GU series 2 – 4/2000 on

Extended Brake Hoses

Front 1 10-1038Rear 1 10-1039

Castor Adjust Bush Kit

Front 1 10-1040

Radius Arm Bush Kit

Front 1 10-1044

Trailing Arm Bush Kit

Rear 2 10-1045 Upper trailing armRear 2 10-1045 Lower trailing arm

Make: NISSAN / FORDModel: PATROL GQ/Y60 and GU/Y61 3-4” LIFT




Comments




Rear 1 pair NIS 111SP Raised H/Duty

Rear 1 pair NIS 109 Raised progressive





Rear 2 G36-5548 Gas chargedUse washer lower

mountSteering Damper

Front 1 SD 4011 To 1/2000

Front 1 SD 4501 2/2000 on

Castor Bush Kit

Front 1 10-1004 Camber Correction kit

Make: NISSANModel: GU LWB Y61 PATROL (WGN)


Comments




Rear 1 pair NIS 111 Raised H/Duty

Rear 1 pair NIS 114 EHD Raised Extra H/Duty





Rear 2 G36-5548 Gas chargedUse washer lower

mountSteering Damper

Front 1 SD 4011

Castor Bush Kit

Front 1 10-1004 Camber Correction Kit

Make: NISSANModel: GU Y61 PATROL (CAB CHASSIS)




Comments


Front 1 pair NIS 101 HD Raised H/Duty

No. of Leaves

Leaf Spring Rear 2 NIS 12 7 + 2 Raised

Rear 2 NIS 12P 2 + 1 Parabolic

Rear 2 NIS 15 7 + 2 GVM upgrade




Steering Damper

Front 1 SD 4011


Fixed Pin Rear 2 SP 667G Greasable

Shackle Rear 2 SK 353G GreasableRear 1 SK 353LHG Greasable

Anti-inversion Must fi t in pairs

Rear 1 SK 353RHG


Castor Bush Kit

Front 1 10-1004 Bush Kit

Make: NISSANModel: PATROL GU (CAB CHASSIS) LEAF REAR



Make: NISSANModel: PATROL CAB CHASSIS GU

3900 kg GVM upgrade for Nissan GU Patrol cab chassis

Part Number: NIS 15GVMKWest Coast Suspension is now authorised

to supply and fi t a Gross Vehicle Mass (GVM)

suspension upgrade for the current Nissan GU

Patrol Cab Chassis to 3900 kilograms GVM. This

enables the operator to legally carry 500 kg over

the factory stipulated GVM.

This kit has been fully certifi ed by the WA Department of Transport with approval number

M148WA allowing the vehicle to attain a legal GVM of 3900 kg.

Compliance with WA state requirementsThis suspension upgrade has been approved in Western Australia by the WA Department

of Transport. Please be aware that some other GVM suspension upgrades available on

the market are licensed in other states and do not necessarily comply with WA state

requirements. Each GVM suspension upgrade is issued with a blue modifi cation compliance

plate fi tted next to the OEM compliance plate, stating the vehicle particulars and the

approval number issued by Transport WA.



2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate






Comments


D21-1/1986–2/1997

Front 1 pair TB 1446HD 890 mm27 mm ∅

D22-1997 onH/Duty

No. of Leaves



Front 2 G36-5535 Gas charged D21

Front 2 G36-3253 Gas charged D22

Rear 2 G36-5562 Gas charged D21/22

Steering Damper

Front 1 SD 4035 D21



Shackle Rear 2 SK 669 Non grease with bushes


U/Bolt Rear 4 UB 660 Square 12 mm ∅

Make: NISSANModel: NAVARA D21 1/1986–2/1997, D22 2/1997 on




Comments



Front 1 pair NIS 126 HHD 3L Diesel

No. of Leaves


Rear 2 NIS 14GVM 5 + 2 GVM upgrade








Make: NISSANModel: NAVARA D40 2006 on 4WD



Make: NISSANModel: NAVARA D40

3300 kg GVM upgrade for Nissan D40 Navara —single, extra or dual cab

Part Number: NIS 14GVMK West Coast Suspension is now authorised to


the current Nissan D40 Navara to 3300 kilograms


440 kg extra over the factory stipulated GVM.


by WA Department of Transport with approval

number M148WA allowing the vehicle to attain a legal GVM of 3300 kg.






WA.



2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate






Comments






Steering Damper

Front 1 SD 4035

Make: NISSANModel: PATHFINDER WD21 1987-1995 R20, TERRANO 1997–1999


Comments

Coil Spring Front 1 pair NIS 102 R50

Rear 1 pair NIS 116 R50

Front 1 pair NIS 126 R51

Rear 1 pair NIS 127 R51


Front 1 G38-5644 RHS 11/95 – 11/98

1 G38-5644/1 11/98 – 10/011 G38-5644/2 11/01 on

Front 1 G38-5645 LHS 11/95 – 11/98

1 G38-5645/1 11/98 – 10/011 G38-5645/2 11/01 on

Front 2 G38-5640 R51 Gas charged strut

Rear 2 G36-5557 To 11/98 R50Gas charged

Rear 2 G36-5558 11/98–05

Rear 2 G36-5528 R51 Gas charged

Make: NISSANModel: PATHFINDER R50 1995–2004 / R51 2005 on




Comments

Leaf Spring Front 2 SUZI 01 4 Tray back

Front 2 SUZI 03 4 Wagon

Rear 2 SUZI 02 3 + 2 Tray back

Rear 2 SUZI 05 4 + 1 Wagon


Front 2 G36-5483


Steering Damper

Front 1 SD 4030


Rear 1 UK 734

Fixed Pin Front 2 SP 657 12 mm x 100 mm Bolt

Rear 2 SP 657 12 mm x 100 mm Bolt

Shackle Front 2 SK 656 C/W Bushes

Rear 2 SK 656 C/W Bushes

U/Bolt Front 2 UB 654 Round Driver side only

Front 2 UB 655 Round Near side only

Rear 4 UB 655 Round

Make: SUZUKIModel: SIERRA SJ/LJ


Comments

Coil Spring Front 1 pair SUZ 114Rear 1 pair SUZ 111


Front 1 G38-5628 Strut Gas chargedRHS

Front 1 G38-5629 Strut Gas chargedLHS


Make: SUZUKIModel: GRAND VITARA 4CYL SWB and LWB 4/1998–2001




Comments







Comments






Make: SUZUKIModel: GRAND VITARA V6 LWB 4/1998–8/2005

Make: SUZUKIModel: GRAND VITARA JB267 LWB 8/2005–07/2008




Comments







Comments

Coil Spring Front 1 pair SUZ 106 Raised

Rear 1 pair SUZ 112 Raised





Front 10-1075


Comments






Make: SUZUKIModel: VITARA 2-DOOR 1.6L SWB 1988–3/1998

Make: SUZUKIModel: JIMNY

Make: SUZUKIModel: VITARA 2-DOOR 2L SWB 1988–3/1998




Comments






Make: SUZUKIModel: VITARA 4-DOOR LWB 1991–3/1998


Comments






Make: SUZUKIModel: VITARA 4-DOOR V6 LWB 1991–3/1998



Make: TOYOTAModel: LANDCRUISER FJ/BJ 40 1969–7/1980


Comments

Leaf Spring Front 2 TLC 01 8 Raised

Rear 2 TLC 02 7 Raised




Steering Damper

Front 1 SD 4023


Rear 1 UK 713





U/Bolt Front 4 UB 415 Round

Rear 4 UB 415 Round



Make: TOYOTAModel: LANDCRUISER FJ/BJ 40 8/1980–4/1986


Comments


Rear 2 TLC 04R 7 Raised




Steering Damper

Front 1 SD 4023


Rear 1 UK 719



Shackle Front 2 SK 353G GreasableRear 2 SK 353G GreasableFront 1 SK 353LHG Greasable

Anti-inversion Must fi t in pairs

Front 1 SK 353RHG

Rear 1 SK 353LHG GreasableAnti-inversion

Must fi t in pairsRear 1 SK 353RHG


Front 1 UB 449 Square Driver side Inner only

Rear 4 UB 415 Round




Comments


Rear 2 TLC 03 7 + 3 Raised




Steering Damper

Front 1 SD 4023


Rear 1 UK 714







Rear 4 UB 416 Round

Make: TOYOTAModel: LANDCRUISER FJ/HJ 45 1969–7/1980




Comments


Rear 2 TLC 05 7 + 3 Raised




Steering Damper

Front 1 SD 4023


Rear 1 UK 719

Fixed Pin Front 2 SP 351G GreasableRear 2 SP 351G Greasable





Front 1 UB449 Square Driver side only

Rear 4 UB 416 Round

Make: TOYOTAModel: LANDCRUISER FJ 45/HJ 47 8/1980–4/1986




Comments

Leaf Spring Front 2 TLC 06 6 RaisedRear 2 TLC 07 6 + 1 Raised

Near sideDriver side



Rear 2 G36-5562 To 10/1985 Gas charged

Rear 2 G36-5561 11/1985 onGas charged

Steering Damper

Front 1 SD 4046


Rear 1 UK 719





Front 1 SK 353LHG GreasableAnti-inversion

Must fi t in pairsFront 1 SK 353RHG




Rear 4 UB 415 Round

Make: TOYOTAModel: LANDCRUISER FJ/HJ 60




Comments

Leaf Spring Front 2 TLC 08 7 Modify to 6-leaf

Rear 2 TLC 07 6 + 1 Modify to 5 + 1




Steering Damper

Front 1 SD 4046


Rear 1 UK 719










Rear 4 UB 415 Round

Make: TOYOTAModel: LANDCRUISER FJ/BJ 73 MWB




Comments


Front 2 TLC 08-8 8 H/Duty

Front 2 TLC 08P 2 Parabolic option

Rear 2 TLC 09-9 7 + 2 Raised

Rear 2 TLC 09-10 8 + 2 H/Duty

Rear 2 TLC 09-11 9 + 2 Extra H/Duty

Rear 2 TLC 09P 2 + 1 Parabolic option


Front 2 G36-5563 Gas chargedSTD Height

Front 2 G36-5567 Gas charged Raised


Steering Damper

Front 1 SD 4046


Rear 1 UK 720









U/Bolt Front 4 UB 436 Square14 mm ∅

Standard format

Front 4 UB 436 HD Square16 mm ∅

Require plate drilled to 16 mm

Rear 4 UB 416 Round14 mm ∅

Standard format

Rear 4 UB 416 HD Round16 mm ∅

Require plate drilled to 16 mm

Make: TOYOTAModel: LANDCRUISER FJ/HJ/HZJ 75




Comments

Coil Spring Front 1 pair TLC 103 Raised

Front 1 pair TLC 103HD Raised H/Duty

Front 1 pair TLC 107 Std ➔ 30 mm

No. of Leaves

Leaf Spring Rear 2 TLC 12 7 + 2 Raised

Rear 2 TLC 12-10 8 + 2 H/Duty

Rear 2 TLC 12-11 9 + 2 Extra H/Duty

Rear 2 TLC 12P 2 + 1 Parabolic

Rear 2 TLC 12GVM 8 + 2 GVM upgrade


Front 2 G 2491L H/Duty hydraulic


Rear 2 G 2492L H/Duty hydraulic


Steering Damper

Front 1 SD 4025 VDJ only

Front 1 SD 4046 HZJ only

Bush Kit Rear 1 UK 743 78 seriesHZJ 6 Cylinder OE pins only

Rear 1 UK 742 79 seriesHZJ 6 CylinderOE pins only

Rear 1 UK 742-18 Suit pins and shackles listed

Fixed Pin Rear 2 SP 356-18G Greasable 18 mm pin

Shackle Rear 2 SK 358-18EXG Greasable Extended shackle

Rear 2 SK 358-18G Greasable 18 mm pin

U/Bolt Rear 4 UB 416 Round14 mm ∅

Standard fi tment


Require plate drill to 16 mm.

Make: TOYOTAModel: LANDCRUISER HZJ 78 (PC), HZJ 79 (CAB CHASSIS) 8/1999–12/2006 LANDCRUISER VDJ 78 (PC), VDJ 79 (CAB CHASSIS) 1/2007 on



Make: TOYOTAModel: LANDCRUISER CAB CHASSIS 79 SERIES V8

3900 kg GVM upgrade for Toyota 79 Series V8 LandCruiser Cab Chassis

Part Number: TLC 12GVMKWest Coast Suspension is now authorised


suspension upgrade for the current 79 Series V8

Toyota LandCruiser Cab Chassis to 3900 kilograms







of Transport. Please be aware that some other GVM suspensions upgrades available on







2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Brake valve spacer block

1 Compliance Plate






Comments



Front 1 pair TLC 107 Std ➔ 30 mm

No. of Leaves

Leaf Spring Rear 2 TLC 15 4 + 2 H/Duty

Rear 2 TLC 15GVM 5 + 2 GVM upgrade

Rear 2 TLC 15P 2 + 1 Parabolic


Front 2 G 2491L H/Duty hydraulic


Rear 2 G 2492L H/Duty hydraulic


Steering Damper

Front 1 SD 4025



Shackle Rear 2 SK 358-18EXG GreasableExtended shackle

Rear 2 SK 358-18G Greasable

U/Bolt Rear 4 UB 416 Round14 mm ∅

Standard fi tment


Require plate drill to 16 mm.

Make: TOYOTAModel: LANDCRUISER VDJ 76 TDI WAGON 1/2007 on



Make: TOYOTAModel: LANDCRUISER WAGON 76 SERIES V8

3500 kg GVM upgrade for Toyota 76 Series V8 LandCruiser Wagon

Part Number: TLC 15GVMKWest Coast Suspension is now authorised


suspension upgrade for the current 76 Series V8

Toyota LandCruiser Wagon to 3500 kilograms














2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Brake valve spacer block

1 Compliance Plate






Comments

Coil Spring Front 1 pair TLC 108 Std. height H/Duty1 pair TLC 106 Raised1 pair TLC 106HD Raised H/Duty

Rear 1 pair TLC 117 Std. height H/Duty

1 pair TLC 109 Raised progressiveTLC 116 Raised

1 pair TLC 116HD Raised H/DutyMounts

Shock Absorber





Steering Damper

Front 1 SD 4046

Make: TOYOTAModel: LANDCRUISER FJ/HJ 80, 100, 105




Comments


6 CYL Turbo Diesel


V8 Petrol and Lexus

Coil Spring Rear 1 pair TLC 116 RaisedRear 1 pair TLC 109 Raised H/Duty




Panhard Rod Bush

Rear 1 PHR 80 R Bush Kit

Re-inforcement Bracket

Front 1 10-1054 Must be installed with torsion bars

Make: TOYOTAModel: LANDCRUISER 100 SERIES TD/V8 LEXUS I.F.S.


Comments

Coil Spring Front 1 pair TLC 102HL3 Hi-LiftRear 1 pair TLC 113HL3 Hi-Lift


Front 2 G40-5543 WCS Big Bore

Rear 2 G40-5550 WCS Big Bore

Steering Damper

1 SD 4046

Panhard Rod Bush

Front 2 PHR 80 F BushRear 2 PHR 80 R Bush

Adjustable Panhard Rod

Front 1 10-1052

Rear 1 10-1053

Extended Brake Hoses

Front 1 pair 10-1036 Non-ABS

Rear 1 pair 10-1037 Non-ABS


Front 1 pair 10-1040 3 degree offset

Radius Arm Bush Kit

Front 1 pair 10-1041

Trailing Arm Bush Kit

Rear 2 10-1043 Upper trailing armsRear 2 10-1042 Lower trailing arms

Make: TOYOTAModel: LANDCRUISER FJ/HJ 80, 100, 105 3-4” lift




Comments


Rear 1 pair TLC 119 Raised


Rear 1 pair TLC 119HD Raised H/Duty




Toyota LandCruiser 200 Series with KDSS SystemPlease be advised of the following procedure when fi tting W.C.S. Springs to Toyota LandCruiser 200 Series

or Lexus LX Series vehicles fi tted with Toyota’s Kinetic Dynamic Suspensions System (KDSS)—also referred

to by Toyota as a ‘hydro-mechanical semi-active anti roll bar’ :

1. Suspend vehicle on 2-post type chassis hoist, allowing wheels to hang.

2. Locate the KDSS valve housing.

Note: The valve housing is located on the left-hand side of the vehicle, on the inside of the chassis

rail, roughly half-way between the front and back of the vehicle.

3. Using a 5 mm hex key, open the 2 levelling valves 3 full rotations anti-clockwise. (Access is from the

underside of the KDSS valve.)

Note: The KDSS system is now open and the sway bar ends should be able to be freely manipulated

with little eff ort, allowing spring/strut removal and installation.

Note: The vehicle must NOT be driven with these valves open as this will compromise the system and render the vehicle unsafe to drive.

Make: TOYOTAModel: LANDCRUISER 200 SERIES 10/2007 on

4. With the vehicle sitting on level ground, close both KDSS levelling valves by turning them in a

clockwise direction, and then tighten.



Make: TOYOTAModel: LANDCRUISER GX200 AND GXL200

3800kg GVM upgrade for Toyota Land Cruiser GX200 and GXL200 wagon

Part Number: TLC 119GVMKWest Coast Suspension is now authorised to


current GX200 and GXL200 Land Cruiser Wagon

to 3800 kilograms GVM. This enables the operator

to legally carry up to 500 kg over the factory

stipulated GVM.


by Department of Transport with approval number M148WA allowing the vehicle to attain a





suspension upgrade is issued with a blue modifi cation compliance plate fi tted next to the


WA.

Suspension kit consists of:


4 Heavy duty coil springs

1 Compliance Plate.






Comments

Leaf Spring Front 2 THX 01-6 6 2.8 Diesel

Rear 2 THX 02 5 + 2 Raised



Rear 2 G36-5562 To 1/1984Gas charged

Rear 2 G36-5561 2/1984 onGas charged

Steering Damper

Front 1 SD 4021


Rear 1 UK 733




Front 2 SK 384EXG GreasableExtended shackle


Rear 2 SK 386EXG GreasableExtended shackle

U/Bolt Front 1 UB 437 Square Driver side

Front 1 UB 678 Square UB 678 forged Driver side

Front 2 UB 437A Square Near side

Rear 4 UB 437A Square

Make: TOYOTAModel: HI-LUX RN 46 LN 106 LEAF SPRING FRONT & REAR 1979–1997



Make: TOYOTAModel: HI-LUX IFS/LEAF REAR SINGLE CAB, DUAL CAB, EXTRA CAB 8/1988–3/2005


Comments


2–8L Diesel


3L Diesel

No. of Leaves

Leaf Spring Rear 2 THX 04 5 + 2 Raised




Steering Damper

Front 1 SD 4033 Petrol and non-turbo diesel









Comments


H/Duty

No. of Leaves





Steering Damper






Rear 2 SK 386EXG Greasable Extended shackle


Make: TOYOTAModel: HI-LUX 4 RUNNER IFS/LEAF REAR LN 61, YN 63 8/1985–1989




Comments


2.4L


2.8L + 3L diesel, V6 petrol

Coil Spring Rear 1 pair THX 101 Raised H/Duty

Rear 1 pair THX 101 HD Raised extra H/Duty




Steering Damper



Make: TOYOTAModel: 4 RUNNER / SURF 130 CHASSIS


Comments

Coil Spring Front 1 pair TPR 101 Raised

Front 1 pair TPR 101 HD Raised H/Duty

Rear 1 pair TPR 103 Raised

Rear 1 pair TPR 103 HD Raised H/Duty




Make: TOYOTAModel: SURF 185 CHASSIS (COIL FRONT & REAR)




Comments

Coil Spring Front 1 pair TPR 101HD Raised 30 mm

Front 1 pair TPR 104 Raised 50 mm

Front 1 pair TPR 104HD H/Duty Raised

No. of Leaves


Rear 2 THX 05GVM 5 + 2 GVM upgrade

Rear 2 THX 05P 2 + 1 Parabolic option



Rear 2 G36-5561 Gas charged THX 05 and

THX 05PRear 2 G36-5521 Gas charged

THX 05GVM





Make: TOYOTAModel: HI-LUX KUN 3.4L TD, GGN 4L V6 / VIGO



Make: TOYOTAModel: HILUX 150 SERIES KUN/GGN

3300 kg GVM upgrades for Toyota 150 Series KUN/GGN Hilux —single, extra or dual cab

Part Number: THX 05GVMKWest Coast Suspension is now authorised


suspension upgrade for the current 150 Series

Toyota Hilux to 3300 kilograms GVM. This enables

the operator to legally carry 465 kg single cab,

590 kg extra cab, 520 kg dual cab over the factory

stipulated GVM.

This kit has been engineer tested and certifi ed by WA Department of Transport with approval

number M148WA allowing the vehicle to attain a legal GVM of 3300 kg.









2 Coil springs

2 Leaf springs

4 U/bolts

1 Shackle bush kit

2 Swinging shackles

2 Fixed pins

1 Compliance Plate






Comments


Front 1 pair TPR 101HD Raised H/Duty


Rear 1 pair TPR 103HD Raised H/Duty




Make: TOYOTAModel: PRADO VZJ/KZJ 95


Comments








Make: TOYOTAModel: PRADO 120 SERIES



Make: TOYOTAModel: PRADO 150 SERIES


Comments

Coil Spring Front 1 pair TPR 104HD Raised







Comments








Make: TOYOTAModel: FJ CRUISER




Comments

Coil Spring Front 1 pair VW 101 Raised

No. of Leaves

Leaf Spring Rear 2 VW 01 4 + 2 Raised




Bush Kit Rear 1 UK 780 Spring bushes only

Fixed Pin Rear 2 N/A

Shackle Rear 2 N/A Greasable


Make: VOLKSWAGONModel: AMAROK



Coil Spring Specifi cations

Part Number

Wire Diameter

(mm)

Free Length (mm)

Drivers Passenger

DAI 102 16 280 280HOL 100 15 390 390HOL 101 16 420 420JEEP 100 15 455 455JEEP 101 15 450 440JEEP 102 15 450 440JEEP 103 14 390 380JEEP 104 16 340 330JEEP 106 17 360 350JEEP 107 16 375 375

JEEP 107HD 17 400 390JEEP 108 17 320 320JEEP 111 14.5 460 460JEEP 112 15 465 465JEEP 113 14 400 400JEEP 114 14.5 400 400LAN 102 21 410 410

LAN 102HD 22 410 410LAN 106 16 395 385LAN 107 16 385 375LAN 108 15 410 390LAN 112 17 435 425LAN 113 17 430 420

LAN 113HD 18 425 415MAZD 100 18 360 360

MAZD 100HD 18.5 365 365MIT 100 18 325 325

MIT 100HD 19 320 320MIT 101 17 400 390

MIT 101HD 18 400 390MIT 102 16 400 390MIT 103 21 350 340MIT 105 16 380 370MIT 109 18 340 340

MIT 109HD 19 320 320MUS 100 15 400 400NIS 100 16 415 400NIS 101 17 405 390

NIS 101HD 18 405 390NIS 101HL3 18 460 450

NIS 102 16 400 400NIS 109 19 465 450NIS 111 21 485 455

NIS 111SP 21 470 455NIS 112 14 430 430NIS 113 17 490 480NIS 114 18 470 460

NIS 114HD 20 470 460NIS 114HL3 20 510 495

Part Number

Wire Diameter

(mm)

Free Length (mm)

Drivers Passenger

NIS 114EHD 22 470 460NIS 116 15 360 360NIS 123 14 380 380NIS 125 19 440 440NIS 126 17 375 375

NIS 126HD 17 360 360NIS 126HHD 17 375 375

SUZ 101 15 290 290SUZ 102 16 285 285SUZ 103 16 295 295SUZ 104 10.5 310 300SUZ 105 16 335 335

SUZ 105H 16 340 340SUZ 106 11.5 350 350SUZ 108 11.5 345 345SUZ 109 12.5 335 335SUZ 110 11 320 320SUZ 111 12.5 360 360SUZ 112 12 325 305THX 101 16 390 380

THX 101HD 17 370 360TLC 101 14 390 375

TLC 102HL3 19 515 525TLC 103 17 460 460

TLC 103HD 18 460 460TLC 106 17 475 485

TLC 106HD 18 460 470TLC 108 17 460 470TLC 109 19 460 470TLC 112 16 410 400

TLC 113HL3 20 480 490TLC 116 18 460 470

TLC 116HD 20 460 470TLC 117 18 455 445TLC 118 18 425 425

TLC 118HD 18.5 425 425TLC 119 18 430 430

TLC 119HD 19 430 430TPR 101 17 350 350

TPR 101HD 17 365 365TPR 103 17 390 380

TPR 103HD 18 380 380TPR 104 17 375 375

TPR 104HD 18 370 370TPR 105 17 390 390

TPR 105HD 18 390 390VW 101 18 305 305



Shock Absorber Reference Chart

Part Number Upper Mount Lower Mount Closed (mm) Open (mm)

G2489L PIN 14 EB2 -19ID 369 615

G2490L PIN 14 PIN 14 364 615

G2491L PIN 14 PIN 14 310 517

G2492L EB2 - 19ID EB2 -19ID 409 666

G36-3204 PIN 10 BARPIN 338 560

G36-3205 CR2 - 12x46 CR1 - 12x36 358 586

G36-3207 CR2 - 16x35 CR1 - 12x36 358 586

G36-3236 BARPIN EB1 - 16x36 350 565

G36-3237 PIN 10 BARPIN 338 560

G36-3253 PIN 10 EB1 - 12x32 211 304

G36-3293 BARPIN CR1 - 12x36 211 304

G36-3294 CR1 - 12x46 CR1 - 12x36 345 562

G36-3295 PIN 12 EB1 - 16x40 350 580

G36-3296 BARPIN CR1 - 12x40 392 650

G36-3297 EB1 - 12x46 CR2 - 12x40 392 650

G36-5481 PIN 10 EB1 - 12x32 268 435

G36-5482 EB1 - 12x32 EB1 - 12x32 283 454

G36-5483 PIN 10 EB1 - 16ID 300 517

G36-5487 EB1 - 12ID EB1 - 12ID 302 493

G36-5488 PIN 10 EB1 - 16ID 311 505

G36-5521 EB2 - 19ID EB2 -19ID 383 630

G36-5522 EB2 - 20ID EB2 - 12x40 383 630

G36-5523 EB2 - 16ID EB2 - 16ID 383 630

G36-5526 EB2 - 19ID PIN 14 388 660

G36-5527 EB2 - 16ID EB2 - 14x41 363 595

G36-5528 CR2 - 14x48 CR2 - 14x48 265 385

G36-5530 PIN 10 BARPIN 232 350

G36-5535 PIN 10 CR1 - 12x32 232 350

G36-5536 EB2 - 16ID EB2 - 16ID 345 555

G36-5538 PIN 10 CR2 - 16x38 242 370

G36-5543 PIN 14 PIN 14 365 615

G36-5546 PIN 14 PIN 14 310 517

G36-5548 EB2 - 19ID EB2 - 19ID 409 666

G36-5550 PIN 14 EB2 - 19ID 369 615

G36-5552 PIN 16 CR2 - 14x40 282 447

G36-5557 CR2 - 16x38 CR2 - 12x48 368 593

G36-5558 CR2 - 12x42 CR2 - 16x42 384 626

G36-5560 EB2 - 16ID EB2 - 16ID 320 525

G36-5561 EB2 - 19ID EB2 - 19ID 363 595

G36-5562 EB2 - 16ID EB2 - 16ID 363 595

G36-5563 PIN 10 EB2 - 19ID 363 595

G36-5564 PIN 10 EB2 - 16x38 346 583

G36-5565 EB2 - 12x40 EB2 - 12x40 363 595

G36-5567 PIN 10 EB2 - 19ID 365 620

G36-5569 PIN 3/8 CR1 - 12x32 303 481

G36-5578 PIN 10 CR1 - 12x40 228 349

G36-5580 PIN 10 CR2 - 16x38 306 486



TYPE A

Measuring Points

TYPE B

Measuring Points

TYPE C

Measuring Points

TYPE D

Measuring Points

Shock Absorber Reference Chart

Part Number Upper Mount Lower Mount Closed (mm) Open (mm)

G36-5582 PIN 12 S/B - 14x48 360 592

G36-5585 PIN 10 EB2 - 19ID 323 530

G36-5586 PIN 12 S/B - 19x45 351 589

G36-5591 EB2 - 19ID PIN 14 368 620

G36-5592 PIN 12 PIN 12 347 572

G36-5593 CR3 - 19x40 PIN 12 338 525

G36-5595 EB2 - 14x38 EB2 - 19x44 322 525

G36-5597 EB2 - 19ID EB2 - 16ID 322 525

G36-5598 CR3 - 12x44 BARPIN 364 590

G36-5599 CR3 - 12x44 CR3 - 12x44 360 571

G36-5600 EB1 - 16ID EB1 - 16ID 352 579

G36-5603 EB1 - 16ID EB1 - 16ID 440 747

G36-5604 PIN 10 CR1 - 12x32 265 413

G36-5607 EB2 - 16ID EB2 - 12x37 378 620

G38-5624 PIN 10 CR3 - 14x50 340 473

G38-5636 PIN 12 S/B - 14x40 346 460

G38-5637 PIN 12 S/B - 14x40 415 540

G38-5638 PIN 12 S/B - 14x40 434 568

G38-5639 PIN 10 S/B - 14x50 311 430

G38-5640 PIN 12 S/B - 14x42 283 385

G38-5641 PIN 11 NO MOUNT 206 313

G38-5642 PIN 12 NO MOUNT 403 561

G38-5650 PIN 12 S/B - 16x38 384 505

G38-5655 PIN 12 FORK 489 615

G38-5660 PIN 12 S/B - 14x39.2 355 500

G40-5543 PIN 14 PIN 14 378 634

G40-5546 PIN 14 PIN 14 330 536

G40-5548 S/B - 19x45 S/B - 19x45 423 689

G40-5550 PIN 14 S/B - 19x45 389 635

PIN ## = Pin diameter (mm)CR1 ## = COTTON REEL BUSH (mm)CR2 ## = COTTON REEL (mm)CR3 ## = COTTON REEL (mm)EB1 ## = EYE BUSH (mm)EB2 ## = EYE BUSH (mm)S/B = SILENT BLOCK BUSH



Part Number Type Upper Mount Lower Mount Open (mm) Closed (mm)

SD25H270 F PIN EYE 678 443

SD27H210 A EYE/PIN EYE/PIN 498 307

SD4011 D PIN PIN 525 306

SD4012 B EYE EYE 655 395

SD4021 C PIN EYE/PIN 542 342

SD4022 B EYE/PIN EYE 540 325

SD4023 A EYE/PIN EYE/PIN 457 320


SD4030 B EYE EYE 445 290

SD4033 E EYE EYE/PIN 613 363

SD4034 B EYE EYE 557 346

SD4035 B EYE EYE 493 301

SD4036 D PIN PIN 488 290



TYPE A TYPE B TYPE C

TYPE D TYPE E TYPE F

Steering Damper Reference Chart



4WD Shackle Bush Kits

Part Number Contents

UK701 2xU674 4xU675 4xU677

UK702 4xU611 8xU613

UK703 4xU424 8xU056

UK704 4xU424 8xU426

UK707 4xU549 4xU624

UK710 2xU549 2xU550 4xU611

UK711 4xU549 4xU611

UK712 4xU611 4xU612 4xU613

UK713 12xU113

UK714 12xU114

UK715 4xU675 4xU676 4xU677

UK718 8xU419 4xU420

UK719 12xU419

UK720 12xU420

UK721 4x3050 2xU147

UK722 2xU147 4xU422 4xU423

UK723 12xU623

UK724 2x3050 2xU147 4xU424

UK728 2xU728 8xU433

UK730 6xU430

UK731 4xU430 2xU431

UK732 4xU432 8xU433

UK733 12xU433

UK734 8xU434 2xU435

UK742 4xU420T 4xU420A

UK742-18 8xU417 4xU418

UK743 2xU420T 4xU420A 4xU420B

UK747 4xU433 2xU728 4xU758

UK751 4xU651 2xU652

UK756 4xU680 4xU753 2xU754

UK760 4xU759 2xU760

UK761 2xU761 2xU762 2xU765

UK762 4xU675 4xU677 2xU775

UK766 2xU766 4xU767 4xU768

UK767 4xU426 4xU427 2xU728

UK768 4xU767 4xU768 4xU776

UK768DC 4xU767 4xU768 2xU776T

UK769 4xU680 4xU753 2xU765

UK770 4xU681 4xU682 2xU683

UK780 2xU780 2xU781

UK867 4xU432 4xU433 2xU766



Part Number Type Material Inside Width Inside Length

UB258 A 11 75 190

UB415 A 14 83 210

UB416 A 14 83 230

UB416HD A 16 83 230

UB436 B 14 72 210

UB436HD B 16 72 210

UB437A B 14 62 190

UB437 B 14 62 210

UB449 B 14 85 230

UB451 A 12 75 190

UB452 B 12 62 105

UB453 A 14 95 210

UB471 B 14 77 230

UB472 A 16 90 280

UB473 A 14 90 200

UB474 B 12 72 170

UB654 A 11 82 160

UB655 A 11 72 140

UB658 A 12 65 170

UB659 A 12 80 170

UB660 B 12 62 190

UB663 A 12 90 220

UB668 B 14 72 230

UB670 A 14 95 230

UB671 A 14 110 255

UB671HD A 16 110 255

UB673 A 12 70 170

UB674 A 13 86 190

UB678 B(FORGED) 14 62 210

4WD Suspension U-Bolt Dimensions

TYPE A TYPE B



Part Number

Type No. of Leaves

Material Main Leaf Dimensions

Spring Camber

(mm)Primary Pack Secondary Pack A (mm) B (mm)

DAT 01 A 6 50 x 6 N/A 475 475 140

DAT 02 B 4+1 50 x 8 50 x10 525 525 160

DAT 03 A 6 60 x 7 N/A 515 640 165

DAT 04 B 5+1 60 x 7 60 x 11 550 625 150

DAT 05 A 6 60 x 7 N/A 475 575 130

DAT 06 B 5+2 60 x 7 60 x 11 520 710 150

DAT 10 B 5+1 70 x 6 70 x 13 550 625 180

FOR 20 B 4+1 65 x 8 65 x 13 655 785 165

FORD 29 A 7 75 x 8 & 9 N/A 700 720 170

FORD 31HD A 7 75 x 8, 9 & 10 N/A 700 720 190

FORD 32 B 5+1 75 x 9.2 & 8.2 75 x 20 635 841 200

FORD 33 B 5+1 75 x 8.2 70 x 20 635 845 250

HOL 01 B 5+2 60 x 7 60 x 13 550 650 220

HOL 02 B 4+2 60 x 8 60 x 13 600 600 165

HOL 02GVM B 5+2 60 x 8 60 x 13 600 600 165

HOL 03 B 4+2 60 x 8 60 x 13 610 750 165

JEEP 02 A 5 65 x 7 N/A 585 725 185/170

LAN 01 A 9 65 x 6 N/A 460 460 135

LAN 02 A 8 65 x 8 N/A 610 610 160

MAZD 01 B 5+2 60 x 7 60 x 11 530 675 125

MAZD 02 B 4+2 60 x 8 60 x 12 585 740 115

MAZD 03 B 4+2 60 x 10 & 8 60 x 13 585 745 120

MAZD 03GVM B 5+2 60 x 10 & 8 60 x 13 585 745 120

MITS 30 B 4+1 70 x 7 70 x 13 520 685 145

MITS 31 B 4+1 70 x 7 70 x 13 520 685 165

MITS 32 B 4+1 70 x 7 70 x 13 520 685 165

MITS 33 B 5+2 70 x 7 70 x 11 520 685 120

NIS 04 A 7 60 x 8 N/A 610 830 265/255

NIS 05 A 7 60 x 7 N/A 550 550 170

NIS 05-6 A 6 60 x 7 N/A 550 550 170

NIS 11 A 7 70 x 7 N/A 550 550 150

NIS 12 B 7+2 70 x 7 70 x 13 590 830 180/170

NIS 12P B 2+1 70 x Parabolic 70 x Parabolic 590 830 160

NIS 13 B 3+2 60 x 8 60 x 12 565 635 150

NIS 14 B 4+2 60 x 8 60 x 12 665 735 160

NIS 14GVM B 5+2 60 x 8 60 x 12 665 735 160

NIS 15 B 7+2 70 x 10, 70 x 7 70 x 13 590 830 150

SUZI 01 A 4 50 x 7 N/A 470 470 105

SUZI 02 B 4+1 50 x 7 50 x 8 505 505 135

SUZI 03 A 4 50 x 7 N/A 475 475 125

SUZI 05 B 4+1 50 x 7 50 x 10 505 535 155

THX 01 A 5 60 x 7 N/A 577 577 140/120

THX 01-6 A 6 60 x 7 N/A 577 577 140/120

THX 02 B 5+2 60 x 7 60 x 11 530 670 180

THX 04 B 5+2 60 x 7 60 x 13 560 740 190

Leaf Spring Specifi cations



Part Number

Type No. of Leaves

Material Main Leaf Dimensions

Spring Camber

(mm)Primary Pack Secondary Pack A (mm) B (mm)

THX 05 B 4+2 60 x 8 60 x 13 610 690 165

THX 05-GVM B 5+2 60 x 8 60 x 13 610 690 165

THX 05P B 2+1 60 x Parabolic 60 x Parabolic 610 690 145

TLC 01 A 8 70 x 7 N/A 502 603 155

TLC 02 A 7 70 x 7 N/A 502 630 200

TLC 03 B 7+3 70 x 7 70 x 11 660 660 230

TLC 04 A 8 70 x 7 N/A 502 603 155

TLC 04R A 7 70 x 7 N/A 502 630 200

TLC 05 B 7+3 70 x 7 70 x 11 655 675 230

TLC 06 A 6 70 x 7 N/A 550 550 190

TLC 07 B 6+1 70 x 7 70 x 13 565 645 220/205

TLC 08 A 7 70 x 7 N/A 550 590 180

TLC 08-8 A 8 70 x 7 N/A 550 590 180

TLC 08P A 2 70 x Parabolic N/A 550 590 190

TLC 09-9 B 7+2 70 x 7 70 x 13 603 720 220

TLC 09-10 B 8+2 70 x 7 70 x 13 603 720 220

TLC 09-11 B 9+2 70 x 7 70 x 13 603 720 220

TLC 09P B 2+1 70 x Parabolic 70 x Parabolic 603 720 190

TLC 12 B 7+2 70 x 7 70 x 13 690 810 235

TLC 12-10 B 8+2 70 x 7 70 x 13 690 810 235

TLC 12-11 B 9+2 70 x 7 70 x 13 690 810 235

TLC 12GVM B 8+2 70 x 10, 70 x 7 70 x 13 690 810 235


TLC 15 B 4+2 70 x 10, 70 x 7 70 x 13 600 780 195

TLC 15GVM B 5+2 70 x 10, 70 x 7 70 x 13 600 790 230


VW 01 B 4+2 70 x 10 & 8 70 x 13 745 745 180

Leaf Spring Specifi cations

TYPE A

(Single Stage Spring)

TYPE B

(Two Stage Spring)

Suspension Installation FormThis form is to be completed and returned to Jenkins Springs within 30 days by the WCS Distributor to validate installation of suspension products

Tel: (+61) 8 9378 2133 • Fax: (+61) 8 9378 2839 • PO Box 398 Bassendean, Perth WA Australia 6934

Date:

Customer Details

Contact Name Telephone

Address

Suburb / Town Postcode State

Vehicle Model Month / Year Built Speedo

Rego No Chassis No Rated GVM

Distributor Name

Address


Telephone Facsimile

Contact Person

New Steering Damper Fitted Poly Bushes Fitted—Front Poly Bushes Fitted—Rear

New U-Bolts Fitted Front Rear

Free height / camber of springs to be fitted

DSF DSR NSF NSR

Place an “X” in the appropriate box to show if accessories are fitted and the position of the accessories

Bull Bar: Alloy Steel Winch Side Bars Power Steering Air Conditioning

Driver Side Front

Shock Part No:

Spring Part No:

Ride Height Before:

Ride Height After:

Driver Side Rear

Shock Part No:

Spring Part No:

Ride Height Before:

Ride Height After:

Near Side Front

Shock Part No:

Spring Part No:

Ride Height Before:

Ride Height After:

Near Side Rear

Shock Part No:

Spring Part No:

Ride Height Before:

Ride Height After:

Torsion Bars Front

Original Equipment

After Market

Sway Bar Front

Original Equipment

After Market

Sway Bar Front

Original Equipment

After Market

New Spring/Shackles

Standard

Greasable

Rim Size

15 inch

16 inch

Other

Polyair Bags

Canopy if Ute

Towbar

Roof Rack

Alloy

Steel

Tyre Carrier

Position

D/S

CTR

P/S

Engine

Petrol

Diesel

Turbo

Cylinders

No.

Battery

Battery

500 km Recheck

Ride Heights

DSF

PSF

DSR

PSR

Main Fuel

Tank (ltrs)

Auxiliary Tanks (ltrs)

Fuel

Water

Position

Position

Warranty Assessment Form

Date:

Distributor / Reseller Details

Company Telephone

Contact Name Facsimile

Address


Warranty Details

Part Number Batch Code

Vehicle Model Year

Fitted / Sold Date Failure Date KMs since fitted

Installed by

Invoice No Invoice date Installation Form No

Accessories fitted to Vehicle e.g. Bullbar, winch, etc.

Vehicle Owner Details

Name

Address


Reason for goods being returned Please tick the appropriate defect

Noise Oil Leak Control Broken/Worn Broken Coil/Leaf

Rattle Seal-Top Stiff/Hard Top Mount Broken Coil

Knock/Thump Top Seam Weld Seized Bottom Mount Broken Leaf - Main Wrap

Swish Bottom Seam Weld Binding Top Rubber Worn Fold Over

Squeak Arc Weld Weak Bottom Rubber Worn Bolt Clip

Split Tube No Gas Pressure Loose Shroud

Vehicle Heights Heights must be taken on a flat level surface.

Leaf Springs—Measure from top of spring to underside of chassis. Coil Springs—Measure the height of the coil in the vehicle.

Please mark the location of the defective part/s on the drawing below with an “X” and mark parts with location.

Before After

Office Use Only

Date rec’d Rec’d by Claim Accepted / Denied Approval No.

Comments

PLEASE NOTE THAT ALL DETAILS MUST BE SUPPLIED OR CLAIM WILL NOT BE CONSIDERED.This form is only for the use with one shock absorber / one leaf spring / one coil spring / suspension bushes

Tel: (+61) 8 9378 2133 • Fax: (+61) 8 9378 2839 • PO Box 398 Bassendean, Perth WA Australia 6934

Jenkins Springs Pty Ltd trading as West Coast Suspensions—4WD Warranty Statement

West Coast Suspensions (hereafter referred to as WCS) warrant all

WCS four-wheel drive parts to the original purchaser for a period of

3 years or 60,000 kilometres whichever occurs fi rst. (Note exception:

Use in mining industries—warranty is for a period of 1 year or 20,000

kilometres whichever occurs fi rst.)

WCS reserves the right to repair or replace, at their discretion, any

product found to be defective in either material or workmanship,

within the warranty period, provided the failure or breakage was

incurred under conditions of normal use.

No claim for warranty will be entered into when product has been

damaged due to; negligent use of product, driver abuse, accident

damage or motor sport.

Limited warranty would apply to product distributed internationally,

mining and fl eet applications. These would need to be scheduled at

point of purchase.

Furthermore, WCS will not warrant any product when used contrary

to that specifi ed by the current WCS catalogues or WCS company

personnel.

WCS will not be liable for claims when product has been incorrectly

installed or installed to mating parts which are of unacceptable

tolerances.

Labour will only be covered under warranty provided the parts were

originally fi tted by WCS. Claims for labour costs which are incurred

by the end user for removal and refi t when product was originally

installed by the end user will not be entered into.

All costs incurred for freight for the return of failed product or to

replace the failed product is the responsibility of the end user (see

‘Warranty Procedure’ below).

WCS accept no responsibility for consequential damages to

associated products relating to the failure of the component or injury

to any person or persons or possessions. WCS will not be liable for

claims for inconvenience caused or commercial loss due to product

failure.

WCS reserves the right to modify or change product specifi cation

and accept no obligation to provide modifi cation to product

previously manufactured and distributed.

Although every effort has been made to ensure that the printed

information in the catalogue is correct, WCS must disclaim

responsibility for specifi cation and application errors.

It is the responsibility of the end user to establish that the products

being purchased comply with local vehicle modifi cation legislation.

West Coast Suspensions—4WD Warranty ProcedureTo ensure prompt processing for claims on components deemed to

be defective WCS ask that the following procedure be adhered to.

Failure to follow procedure could result in a delayed assessment of

your warranty claim.

The installer or end user will be required to make contact with WCS

Warranty department and inform them of the pending warranty.

Once an approval number has been issued the suspect product and

relevant documentation (eg. copy of invoice and completed WCS

Assessment Form) can be transported to WCS.

Reimbursement for labour costs will be covered only if the parts

were originally fi tted by WCS. Those claims for labour costs which are

incurred by the end user for removal and refi t when the product was

originally installed by the end user will not be entered into.

Furthermore, the costs incurred for freight for the return of the failed

product or to replace failed product is the responsibility of the end

user.

The WCS Warranty offi cer will at his discretion make a decision

concerning the claim. The Warranty offi cer will repair, modify or

replace the defective component.

Excluded from warranty will be any item where breakage or premature

wear has occurred due to incorrect installation or when components

are fi tted to mating parts which have unacceptable tolerances.

Read this to save money and time…Have you ever heard these words “But it was level before you worked

on it…” and been unable to dispute them with hard facts? Get the

facts before you start pulling the vehicle apart.

Please spend the few minutes it takes to complete this form as this

could save you hours of work rectifying a problem that need not

have occurred.

All measurements must be taken with the vehicle on level ground.

Measurements taken after installation must be done after the vehicle

has been road tested and the new parts have settled.

Ride heights are measured in millimetres from the centre of the

wheel hub to the wheel arch. If fl ares are fi tted, measure to the lip

of the metal part of the guard (see Diagram 1). On some vehicles,

(eg. cab chassis) this is not possible or practical. In this instance,

measurements should be taken between the bumpstop and its

striker plate (see Diagram 2).

If a vehicle measures “lop-sided” at the wheel arch, also check the

bumpstop clearances – this will help to determine if the chassis is

bent or the body is not true to the chassis. Measure and record on the

installation form the free height of the new coils, or the free camber

of the new leaves, before fi tting to the vehicle. Also take note of the

old coils or leaves once removed – are there any discrepancies in the

new height/camber? Were the tallest ones on the driver or passenger

side? This information is invaluable when sorting problems with

vehicles that don’t sit level.

Diagram 1 Diagram 2

West Coast Suspensions

Tel: (+61) 8 9378 2133

Fax: (+61) 8 9378 2839

Email: [email protected]

188 Railway Parade, Bassendean, WA 6054

PO Box 398, Bassendean, Western Australia 6934

Web: www.westcoastsuspensions.com.au

Tel: +61 8 9378 2133 Fax: +61 8 9378 2839Email: [email protected] Railway Parade, Bassendean WA 6054 · PO Box 398, Bassendean, Western Australia 6934

product catalogue 2015–16 - west coast · pdf filemodel: ranger 2006–2011 ......

Documents