product catalog - cable grippers, inc. · 2019-05-31 · phone 702 .869 .0755 fax 702 .543 .2305...
TRANSCRIPT
PRODUCT CATALOG
secure, decorative, adjustable suspension systems for lighting, signage, artwork, and more
ISO 9001:2008
We Stand Alone... Service, Quality, and Competitiveness
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
2
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
ISO 9001:2008THE GRIPPER
Cable Grippers provide instant toolless height adjustment for drop ceilings, light fixtures, displays, signs and more. Radically reducing installation time and eliminating human error.
How Cable Grippers Work
1. Simply push down the plunger and slide thegripper up and down the cable to thedesired height .
2. Let go and it stops and automatically grips.
Attach the product
you wish to hang. Grippers are
available for many different connection
methods to hang any suspended
items.
Cable Grippers easily slide up and down the cable with a touch of your finger tip.
Stainless Steel Cable
POWER FEED SUSPENSION KITS
Two Piece Cable Coupler Strain Relief Bushing
Canopy
Power Cord
Cable Tie (1 Per Foot)1/16" Cable
Gripper (Type Will Vary)
Locknut (Type Will Vary)
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
3
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Table of ContentsAbout Our Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pages 2 & 4Nano Grippers for 1/32" Cable (0 .81 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5Micro Grippers for 3/64" Cable (1 .19 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5Mini Grippers for 3/64" (1 .19 mm) and 1/16" (1 .59mm) - MGR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 5-6Looping Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6Grippers for Recessed Fixtures 3/64"-1/16" cable and 5/64", 3/32" and 2 .5 mm . . . . . . . . . . . . . . . . . . . . . . . . . page 7Grippers for 5/64" (2mm) and 3/32" (2 .38 mm) - GR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7Side Exit Grippers for 3/64" (1 .19mm) and 1/16" (1 .59mm) Cable - MGR Series . . . . . . . . . . . . . . . . . . . . . . . . pages 8-9Side Exit Grippers for 5/64" (2mm) and 3/32" (2 .38mm) Cable 2 .5mm - GR Series . . . . . . . . . . . . . . . . . . . . . . . page 9Special Application Gripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 10Power Feed and Blank Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 10Complete "V" assemblies for balancing the fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 111/16" Cross Cable for MGR-SE-1/4-20-BS of CC 1/16" Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 12Custom Bagged Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 13Engineering Samples and Custom Bagged Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 14Cable Couplers accept 3/64", 1/16", 5/64" and 3/32" cables with die cast ends #1 & # 2 . . . . . . . . . . . . . . . . . .page 14Barrel Style Cable Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15Multiple 3/64" Cable Barrel Style Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 15Machined Back Plates, Nickel Plated for mounting to walls, ceilings, and floors . . . . . . . . . . . . . . . . . . . . . . . . .page 16White orBlack Canopies for mounting to J Boxes, ceilings, and walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16T Bars, J-Boxes, Clips, and J-Box Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 16Locknuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17Bulk Cable on Spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 17Accessory Adapters, Bolts with through holes, Screws, Hooks, etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pages 17-18Deluxe S/S Cable Assemblies with #1 die cast end and fuse cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19Cable, 3/64" with fuse cut and # 1 die cast end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19Cable, 1/16" with fuse cut and # 1 die cast end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19Cable, 5/64" with fuse cut and # 1 die cast end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19Cable, 3/32" with fuse cut and # 1 die cast end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 19Cable, 1/32" with fuse cut and #2 1/2 ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 20Cable with die cast end #2 1/2 ball on both ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 20Cable with #2 1/2 ball end and fuse cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 20Cable, CC-1/4-20 on one end and a #3 die cast eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 20Cables with die cast eyes stop #3 and #4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 20Cutter, Stop Sleeves, Ferrules, Wire Rope Clips, etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 21Cable Loops, barrel with set screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 21Kwik Lock Connectors for make a loop with cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 21Side Exit Grippers for 3/64" (1 .19mm) and 1/16" (1 .59mm) Cable, with bottom cross cable option . . . . . . . . . . . .page 22Cut & Stripped Lengths of SJT Power Cords . UL,105 C, 300 volt . 3, 4, 5 & 6 18 AWG conductors . . . . . . . . . . .page 23AWM Thin power cord 300/600V . 3, 4, 5 & 6 Conductor . Indoor/Outdoor 18AWG power, 22 AWG signal . . . . . .page 23AWM and SJT 18 AWG decorative metallic braided power cord - 500' Spools . . . . . . . . . . . . . . . . . . . . . . . . . .page 24Cable and Cord Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 24Model Specification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 25Fixture Assembly Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 26-30Seismic Bracing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30GR-1/4-20-3&4 Cable Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 31
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
4
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Testing Independent tests were performed by three professional engineering labs located throughout the United States. Their independent results were analyzed and the lowest amount for type of gripper and type of cable is listed and is shown in pounds. Cable Grippers recommends a safety factor of 80%. Therefore the weights listed for 1 or 2 cables are 20% of the minimum breaking results.
Specifications All dimensions, weights, sizes, strengths and other specifications shown in this catalog are for reference only and subject to change without notice. CGI information regarding independent testing of its" products are for informational purposes. Actual conditions may vary, and CGI recommends that users test their products with all the components of their system. The manufacturer and user of the end product are responsible for their applications, and compliance with all local, state, and federal safety regulations.
Manufacturing Our cable assembly manufacturing facility has produced millions of cable assemblies. We are proud of our products and our philosophy. It is our goal to offer quality suspension components at competitive prices.
Sales Policies and Terms All sales are final. Open account terms will be extended to companies with approved credit. Terms are Net 30 days, unless otherwise noted, prices quoted are F.O.B. shipping point. All orders are subject to acceptance by Cable Grippers, Inc. We cannot be held responsible for delays or non fulfillment due to riot, fire, flood, strikes, or other causes beyond our control. All prices are subject to change without notice. Prices are based on costs and conditions on date of quotation and are subject to change by seller before final acceptance. All annual orders to be shipped complete within a one-year period from date of order.
Warranty Cable Grippers, Inc. products are unconditionally guaranteed against manufacturing defects. Any item found defective will be replaced or adjustment made provided we are notified promptly upon receipt. We reserve the right to request that an item be returned to us for examination and cannot be responsible for labor charges incurred in replacement of any item. Our liability for defects on any item shall not exceed its replacement cost to us. Debit memos will not be accepted without authorization from us. Please contact us for a RGA (return goods authorization). Cable Grippers, Inc. will not accept any liability arising from performance of product assembled by other parties.
With our many coupler styles (CC-1/4-20 shown) you can attach to anything you want to hang from: ∙ J Boxes ∙ T-Bars ∙ UniStrut ∙ Sheetrock ∙ Masonary ∙ Wood Kits of components are
available, bagged and labeled, to meet any customer requirement.
With our many Cable Gripper styles (GR 1/4 IP TN shown) you can hang anything: ∙ Drop Ceilings
∙ Light Fixture Pendants ∙ Signs ∙ Displays ∙ Shelves ∙ Picture Frames
CableDiameter Inches
Series of Gripper
CableMaterial
CableConstruction
Min. BreakingPounds
Max. Weightfor 1 Cable
Max. Weightfor 2 Cables
Bottom Exit Grippers3/64 MICRO SS 7 X 7 135 27 541/16 MGR SS 7 X 7 312 50 1001/16 GR SS 7 X 7 217 42 843/32 GR SS 7 X 7 490 98 196
Side Exit Grippers3/64 MGR SS 7 X 7 122 25 501/16 MGR SS 7 X 7 157 31 631/16 GR SS 7 X 7 172 34 683/32 GR 7 X 7 369 74 148
Product not suitable for wet and damp areas unless specified.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
5
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
MGR-10 MM Mini Gripper, for 1/16" cable. Cable exits out
bottom of gripper. Mounts in Metric 10 mm hole (7/16" diameter). Mounting depth .575".
Mounting nut not included. With safety nut.
MGR-1/4-IP-SR-NSN Mini Gripper, for 1/16" cable. Cable exits the bottom . Flats on side for wrench mounting. Mounts in 9/16" hole. Mounting depth .350".
Mounting nut ( LN-1/4-IP) not included. No safety nut.
Micro Grippers for 3/64" cable (1.19 mm)
MGR-PH Picture Hook for 3/64" cable (1 mm)
Cable exits from the side. Forhanging artwork or signs.
With safety nut.
MGR-M6MM Mini Gripper, for 1/16" cable. Cable exits the
bottom. M 6-Metric thread. 1/4" mounting hole.Mounting nut not included. No safety nut.
MGR-1/4-20 Mini Gripper, for 1/16" cable. Cable exits thebottom. 1/4-20 thread. Mounts in 1/4" hole.
Mounting nut (LN-1/4-20) not included. With safety nut.
MGR-10/32 Mini Gripper, for 1/16" cable. Cable
exits the bottom. 10/32 thread.Mounting nut included. No safety nut.
MGR-1/8-IP-S Mini Gripper, for 1/16" cable. Cable exits the
bottom. Mounts in 1/8-IP hole (7/16"). Slot and knurled edges on top for mounting. Mounting
depth .575". Mounting nut (LN 1/8-IP) notincluded. With safety nut.
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
MICRO-GR Micro Gripper for 3/64" cable (1 mm). Cableexits from the bottom. Mounts in 5/16" hole.
Mounting Depth .385". Mounting nut(LN-5/16) included. No safety nut.
MICRO-GR-SN Micro Gripper for 3/64" cable (1 mm). Cable
exits the bottom. Mounts in 5/16" hole.Mounting Depth .385" Mounting nut(LN-5/16) included. With safety nut.
Nano Grippers for 1/32" (0.81 mm)
NANO-GRNANO Gripper for 1/32" cable (0.81 mm). Cable exits
out bottom of gripper. Max load 10 Lbs. Mounts inM6" hole. Mounting nut included. No safety nut.
NANO-SE-8/32 NANO Gripper for 1/32” cable.0.81mm). Cable exits
from the side.Max load 8 Lbs. Bottom is tapped for 8/32 stud or machine screw (not included). No safety nut.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
6
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
1 Insert cable into looping gripper
2 Pass cable through or around anchor point
3 Insert cable back into looping gripper
To adjust height - Hold gripper and push left cable up or pull right cable down
Free cable must exit looping gripper minimum 1"
Loop cables over beams or joists, for instant tool-less height adjustment.
Looping Grippers - Two sizes 3/64"- 1/16" cable or 5/64 - 3/32 .See page 13 for looping cable kits with Hooks, Toggles, Loops or Stud end cables. Patent #0629,8035
1/16” 5/64” OR 3/32” CABLE
SWEDGE
FIXTURE
CABLELOOPINGGRIPPER
STRUCTURE
HOOKS WITHSPRING LATCHES
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm) (Cont'd)
MGR-1/8-IP-GS Mini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in 1/8-IP hole (7 /16" diameter). Mounting depth .575". Designed for glass or wood
shelving. Mounting nut included.
GR-3/32-LP Patent #0629,8035 Looping Gripper securely grips 5/64" and 3/32" aircraft
cable in a loop and allows for quick tool-less adjustment. For wrapping cable around beams and joists.
MGR-1/8-IP-ALL Mini Gripper, for 1/16" cable. Body externally threaded
1/8-IP. Cable exits out bottom of gripper. Mounts in 1/8-IP hole (7/16" diameter). Overall length 1.05".
Mounting nut (LN 1/8-IP) not included.
MGR-1/16-LP Patent #0629,8035 Looping Gripper securely grips 3/64" and 1/16" aircraft
cable in a loop and allows for quick tool-less adjustment. For wrapping cable around beams and joists.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
7
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Grippers for 5/64" (2 mm) and 3/32" (2.38mm)
GR-1/4-IP Gripper, for 5/64" and 3/32" cable. Cable exits out the bottom of gripper. Flat on side for open end wrench mounting. Mounts in 9/16" diameter hole. Mounting depth .675". Mounting nut (LN-1/4-IP) not included.
GR-3/8 IP Gripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 11/16" diameter hole. Mounting depth .675". Mounting nut (LN-3/8-IP nut)
not included.
GR-1/4-IP-TN Gripper, for 5/64" and 3/32" cable. Cable exits out
the bottom of gripper. Mounts in 9/16" diameter hole. Mounting depth .1". Secures with 1/4-IP
checkered nut (included).
GR-1/4-IP-ALL Gripper, for 5/64" and 3/32" cable. Continous Outside thread of 1/4-IP. Mounts in 9/16" diameter hole. Overall
length .750". Mounting nut (LN-1/4-IP) not included.
GR-1/4-IP-TN-R1 Gripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 9/16" diameter hole. Designed for shelves, strut, and thick mounting
surfaces. Thread height .750". Secures with 1/4-IP checkered nut (included).
GR-1/4-20-LD Gripper, for 5/64", 3/32", and 2.5mm cable. Cable exits out bottom of gripper with 1/4-20 external thread. Requires 1/4" diameter mounting hole.
Mounting nut (LN-1/4-20) not included.
Grippers for Recessed Fixtures 3/64"- 1/16" cable and 5/64, 3/32 and 2.5mm. Cable released by pulling the bottom thumb nut.
MGR-1/8-IP-REC Mini Gripper, for 1/16" cable. For installing recessed fixtures. Cable can be released by pulling on the grip nut on the bottom of the gripper. Mounts in 1/8" IP
hole (7/16" diameter). Secures with a lock nut (LN 1/8" IP) not included.
GR-1/4-IP-REC Gripper, for 5/64", 3/32", and 2.5mm cable. For
installing recessed fixtures. Cable can be released by pulling on the grip nut on the bottom of the gripper.
1/4" IP. Mounts in a 9/16" hole. Secures with a lock nut (LN 1/4" IP) not included.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
8
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Side Exit Grippers for 3/64" (1.19mm) and 1/16" (1.59mm) Cable
MGR-SE-BF Gripper for 3/64" and 1/16" cable. Cable exits out side of gripper. No safety nut.
Side screw included. Overall length 1.49". Outside diameter is .36".
MGR-SE-M4 Cable exits out the side of gripper.
Bottom of gripper internally tapped for M4 metric machine screw (not included).
No safety nut. Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-8/32 Cable exits out the side of gripper. Bottom of gripper internally tapped for 8/32 stud or machine screw (not
included). Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-8/32-NCCable exits out the side of gripper. Bottom of gripper internally tapped for 8/32 stud or machine screw (not
included). Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-8/32-SHCable exits out of the side of gripper. Bottom of the gripper tapped for 8/32 stud or machine screw (not included).
Overall length 1.39" and outside diameter 0.35".
MGR-SE-1/4-20 Cable exits out the side of gripper. Bottom of gripper internally tapped
for 1/4-20 stud or machine screw (not included). Approximately 1-1/4" height X
3/8" diameter.
MGR-SE-1/4-20-EXT Cable exits out the side of gripper.
Bottom of gripper is externally threaded 1/4-20. No safety nut. Approximately
1-1/2" high X 3/8" diameter.
MGR-SE-1/8-IP Cable exits out the side of gripper.
Bottom of gripper externally threaded 1/8-IP and internally tapped for
1/4-20 stud or machine screw (not included). No safety nut. Approximately
1-1/4" height X 3/8" diameter.
MGR-SE-1/4-20-TH Unique square gripper. Designed for end of sign or fixture mounting. Cable exits
out the side of gripper. Bottom of gripper internally cross tapped for 1/4-20 screw
(not included). Approximately 1-3/8" height X 1/2" square.
MGR-SE-ADJ-8/32 Cable exits out the side of gripper. Bottom of gripper has movable 180
degree swivel 8/32 internally tapped foot. Approximately 1-1/4" height X
3/8" diameter.
MGR-SE-ADJ-1/4-20 Cable exits out the side of gripper. Bottom of gripper has movable 180
degree swivel 1/4-20 internally tapped foot. Approximately 1-1/4" height X
3/8" diameter.
MGR-SE-ADJ-1/4-20-EXT Cable exits out the side of gripper. Bottom of gripper has movable 180
degree swivel 1/4-20 externally threaded. Approximately 1-1/4” x
3/8" diameter.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
9
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Side Exit Grippers For 3/64" (1.19mm) and 1/16" (1.59mm) Cable (cont'd)
MGR-SE-M4-Shoe Cable exits out the side of gripper. Bottom of gripper internally tapped
for M4 threaded shoe (included). Approximately 1-1/4" height X
3/8" diameter.
MGR-SE-Hook Cable exits out the side of gripper. Hook (included) threaded (M4) into bottom of gripper. No safety nut. Overall 2" height
(with hook) X 3/8" diameter.
MGR-SE-Hook w/ Safety Clip Cable exits out the side of gripper. No
safety nut. Overall 2" height (with hook) X 3/8" diameter.
MGR-SE-HOOK-LGHook With Safety Clip.
Cable exits out the side of gripper. Overall 2.83" height (with hook).
Side Exit Grippers For 5/64" (2mm) and 3/32" (2.38mm) Cable 2.5mm
GR-SE-1/4 x 1/8-IPS Cable exits out the side of gripper.
Bottom of gripper externally threaded 1/8-IP and internally tapped for 1/4 X 20.
Approximately 1-3/8" height X 1/2" diameter.
GR-SE-ThumbScrewCable exits out side of gripper. Bottom
of gripper has hole for cable pass through and tapped M6 thumbscrew (included).
GR-SE-BF Cable exits out the side of gripper.
Bottom of gripper internally tapped for M4 metric machine screw (included). Approximately 1-1/4" height X 3/8"
diameter.
GR-SE-BSCable exits out the side of gripper.
Bottom of gripper internally tapped for M6 metric machine screw (included).
Approximately 1-1/4" height X 3/8" diameter.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
10
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Special Application Gripper
GR-LD Gripper for 5/64", 3/32" and 2.5mm cable, with hidden plunger. Requires special tool or slim screwdriver to release. Mounts in a washer with a .430" (minimum
hole). Designed for push fit.
Power Feed and Blank Tubes
PF-1/8-IP (for MGR 1/8-IP Gripper) Tube Only. Use MGR-1/8-IP-S mini gripper (not included) or CC-CAP, or CC-1/4X cable coupler.
Internally tapped 1/8-IP and externally tapped 1/8-IP. Side entrance for power cord. Mounting nut
(LN-1/8-IP not included). Overall length 1.5" and outside diameter 0.469".
PF-1/4-IP (for MGR 1/8-IP Gripper) Tube Only. Use MGR-1/8-IP Gripper (not included), or CC-CAP or CC-1/4 X cable coupler. Internally tapped
1/8-IP. Cable exits out bottom of gripper, cap, or coupler with side entrance for power cord with bottom exit.
Mounts in 9/16" diameter hole. Lower outside diameter is threaded 1/4-IP. Mounting nut ( LN-1/4-IP not included).
Overall length 1.75" and outside diameter 0.507".
PF-3/8-IP-SE (for MGR 1/4-IP Gripper) Tube Only. Use GR-1/4-IP Gripper (not included).
Internally tapped 1/4-IP. Cable exits out side of tube, side entrance for power cord with bottom exit. Mounts
in 11/16" diameter hole. Lower outside diameter is threaded 3/8-IP. Mounting nut (LN-3/8-IP not included).
Overall length 1.78" and outside diameter 0.625".
GR-3/8-IP-BL Blank Tube Only. Internally tapped 1/4-IP. Lower
outside diameter is threaded 3/8-IP. Overall length 1.78" and outside diameter 0.625".
PF-1/2-IP (for GR 3/8-IP Gripper) Tube Only. Use GR-3/8-IP Gripper. Cable exits out bottom of gripper, side entrance for power cord with bottom exit.
Mounts in 7/8" diameter hole. Internally thread 3/8-IP. Lower outside diameter is threaded 1/2-IP. Mounting nut ( LN-1/2-IP not included). Overall length 1.78 and outside diameter 0.79".
PF-3/4-IP-SE (for GR 1/2-IP Gripper) Tube Only. Use GR-1/2-IP Gripper. Cable exits out side of tube
or bottom. side entrance for power cord with bottom exit. Mounts in 1" diameter hole. Internally threaded 1/2-IP. Lower outside diameter is threaded 3/4-IP, Mounting nut (LN-3/4-IP not included). Overall length 2" and outside diameter 1.04".
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
11
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Complete " V" assemblies for balancing the fixture. Includes side exit grippers for 3/64" and 1/16" cable and ends for retaining fixture.
MGR-SE-TH-C1 Side exit mini gripper with safety nut on plunger. Comes with 1/16" X 9.5" cable with a 10/32 bolts,
star washers and captive nuts on each end, held with #2 half ball end.
Thumbscrew for balancing cross cable.
MGR-SE-TH-C2 Side exit mini gripper with smooth plunger. Comes with 1/16" X 9.5" cable with a 10/32 bolts, star washers and
captive nuts on each end, held with #2 half ball end. Thumbscrew for balancing cross cable.
MGR-SE-TH-C3 Side exit mini gripper with safety nut on plunger.
Comes with 1/16" X 8" cable with #2 1/2 ball on each end.
MGR-SE-TH-C4-8-1/4 Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/4" long screws on 8" cable with #2 1/2 ball ends. Thumbscrew for balancing cross cable.
MGR-SE-TH-C4-8-1/2 Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/2" long screws on 8" cable with #2 1/2 ball ends. Thumbscrew for balancing cross cable.
MGR-SE-TH-C4-13-1/4 Side exit mini gripper with smooth plunger. Comes
with captive 1/4-20 X 1/4" long screws on 13" cable with #2 1/2 ball ends. Thumbscrew for
balancing cross cable.
MGR-SE-TH-C4-13-1/2 Side exit mini gripper with smooth plunger. Comes with captive 1/4-20 X 1/2" long screws on 13" cable with #2 1/2 ball ends. Thumbscrew for balancing cross cable.
MGR-SE-TH-CS-5 Side exit mini gripper with smooth plunger. Cross cable is 5" long with die cast mushroom ends (#5).
MGR-SE-TH-C6-18-1/4 Side exit mini gripper with safety nut on plunger. Comes with captive 1/4-20 X 1/4" long screws on
3/64 x 18" cable with #2 1/2 ball ends. Thumbscrew for balancing cross cable.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
12
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
1/16" Cross Cable for MGR-SE-1/4-20-BS of CC 1/16" Coupler
C-1/6-8-BH-1/4Cable, 1/16 X 8", with 2 each BH-1/4-20-1/4" long, captive
with #2 1/2 ball ends.
C-1/16-18-BH-1/4Cable, 1/16 X 18", with 2 each BH-1/4-20-1/4" long, captive
with #2 1/4 ball ends.
C-1/16-8-BH-1/2 Cable, 1/16 X 8", with 2 each BH-1/4-20-1/2" long, captive
with #2 1/2 ball ends.
C-1/16-18-BH-1/2Cable, 1/16 X 18", with 2 each BH-1/4-20-1/2" long. captive
with #2 1/2 ball ends.
C-1/16-12-BH-1/4Cable, 1/16 X 12", with 2 each BH-1/4-20-1/4" long, captive
with #2 1/4 ball ends.
C-1/16-24-BH-1/4Cable, 1/16 X 24", with 2 each BH-1/4-20-1/4" long, captive
with #2 1/4 ball ends.
C-1/16-12-BH-1/2Cable, 1/16 X 12", with 2 each BH-1/4-20-1/2" long, captive
with #2 1/2 ball ends.
C-1/16-24-BH-1/2Cable, 1/16 X 24", with 2 each BH-1/4-20-1/2" long, captive
with #2 1/2 ball ends.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
13
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Custom Bagged Kits... Kits for grippers or looping grippers (typical examples).Cable Grippers will make up any assortment and quantity of kits for your application.
C-1/16-120" G-SNAPHOOK-LP-KITS (with 18" Y Overall 138")
1/16" x 120" Gal. Cable with 2 Spring Hooks with Looping Gripper
C-3/32-120" G-SNAPHOOK-LP-KITS (with 18" Y Overall 138" )
3/32" x 120" Gal. Cable with 2 Spring Hooks with Looping Gripper
C-3/32-60" G-SNAPHOOK-LP-KITS (with 18" Y Overall 78" )
3/32" x 60" Gal. Cable with 2 Spring Hooks with Looping Gripper
C-3/32-240" G-SNAPHOOK-LP-KITS (with 18" Y Overall 258" )
3/32" x 240" Gal. Cable with 2 Spring Hooks with Looping Gripper
C-1/16-60" Gal-W2-LP1/16" x 60" Gal. Cable with 2" Loop End with
Looping Gripper
TA-12-4TOGGLE-60"LP1/16"-60" with 4-12" Toggle Legs
Overall 72"
TA-18-4TOGGLE-60"LP1/16"-60" with 4-18" Toggle Legs
Overall 78"
TA-12-4TOGGLE-120"LP1/16"-120" with 4-12" Toggle Legs
Overall 132"
TA-18-4TOGGLE-120"LP1/16"-120" with 4-18" Toggle Legs
Overall 138"
TA-12-4TOGGLE-180"LP1/16"-180" with 4-12" Toggle Legs
Overall 192"
TA-18-4TOGGLE-180"LP1/16"-180" with 4-18" Toggle Legs
Overall 198"
TA-12-4TOGGLE-240"LP1/16"-240" with 4-12" Toggle Legs
Overall 252"
TA-18-4TOGGLE-240"LP1/16"-240" with 4-18" Toggle Legs
Overall 258"
C-1/16-120" Gal-W2-LP1/16" x 120" Gal. Cable with 2" Loop End with
Looping Gripper
C-3/32-360" G-SNAPHOOK-LP-KITS (with 18" Y Overall 378" )
3/32" x 360" Gal. Cable with 2 Spring Hooks with Looping Gripper
TA-12"-180"-SETS-LP 1/16"-180" with a 12" Y Toggle Overall 192"
TA-12"-SETS-LP 1/16"-120" with a 12" Y Toggle Overall 132"
TA-18"-180"-SETS-LP 1/16"-180" with a 18" Y Toggle Overall 198"
TA-6"-SETS-LP 1/16"- 60" with a 12" Y Toggle Overall 72"
TA-18"-60"-SETS-LP 1/16"-60" with a 18" Y Toggle Overall 78"
TA-18"-SETS-LP1/16"-120" with a 18" Y Toggle Overall 138"
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
14
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Cable Grippers will make up any assortment and quantity of kits for your application.
Engineering Samples and Custom Bagged Kits... Kits for grippers orlooping grippers (typical examples)
PF-3, 4, 5, 6 Kits 18/3 or 18/4-60" W cord, Can-5-2-W, Gr 1/4" IP Gripper, CC x 1/4" x 1/8"-IP Ceiling Coupler, Heavy Duty Bracket Bar Tap 1/4 20, 2 Strain Relief and 1/16" Aircraft Cable
NPF Kit Can-5-1-W, GR 1/4"-IP, CC x 1/4" x 1/8" Ceiling Coupler, Heavy Duty Bracket
Bar, 1/16 Aircraft Cable
CC-1/4 X 1/8-IPCable couplers, two piece, internally
threads on to 1/4-20 thread, externally 1/8-IP threaded for checkered
barrel coupling that functions as slip ring to hold canopies in place.
CC-1/4-20Cable coupler, one piece, accepts all
cables with # 1 and #2 ends, internally threaded 1/4-20.
CC-1/4-20-PLCable coupler, one piece, accepts all cables with #1 and #2 ends, internally
threaded 1/4-20.
CC-1/4-20-R1Cable coupler, one piece, accepts all cables with #1 and #2 ends, internally
threaded 1/4-20.
CC-SE-CAPCable coupler, two part, rear flanged part
has hole for mounting screw, internally threaded 1/8-IP for front CAP that holds
cable assembly.
CC-CAPCap only, externally threaded 1/8-IP.
accepts #1 and #2 cable ends, that holds cable assembly.
CC-SlotCable coupler, two parts, rear part
internally threaded 1/4-20, externally 1/4-IP dome coupling that retains cable
assembly. Slot allows cable to hang straight on slope ceilings to walls.
Cable Couplers accept 3/64", 1/16", 5/64 and 3/32" cables with die cast ends #1 and #2
CC-1/8-IP Cable coupler, one piece, accepts all cables with #1 and #2 ends, internally
threaded 1/8-IP.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
15
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Barrel Style Cable Couplers
CPH-1/16 Cable coupler designed for panel support, one piece, accepts all cables with #1
and #2 ends, has .250" cross slot in bottom for set alien screw to hold panel.
CC-1/4-20-MODCable coupler, one piece, accepts all cable with # 1 and #2 ends, internally
threaded 1/4-20. Locks with alien set screw.
CC-1/16Cable coupler is designed for accepting the die cast end,
with a slot and set screw for a cross cable.
CC-1/8-IP-2Cable coupler, one piece,
accepts 2 each 3/64" # 2 smalI ball end cables, internally
threaded 1/8-IP.
Multiple 3/64" Cables Barrel Style Couplers
CC-1/8-IP-3Cable coupler, one piece,
accepts 3 each 3/64" # 2 small ball end cables, internally
threaded 1/8-IP.
CC-1/8-IP-4Cable coupler, one piece,
accepts 4 each 3/64" # 2 small ball end cables, internally
threaded 1/8-IP.
CCC-1Cross cable coupler, joins
horizontal and vertical cables.
CC-1/4-IP-3Cable coupler, one piece,
accepts 3 each 3/64" # 2 small ball end cables, internally
threaded 1/4-IP.
CC-1/4-IP-4 Cable coupler, one piece,
accepts 4 each 3/64" # 2 small ball end cables, internally
threaded 1/4-IP.
CC-3/8-IP-3Cable coupler, one piece,
accepts 3 each 3/64" # 2 small ball end cables, internally
threaded 3/8-IP.
CC-3/8-IP-4Cable coupler, one piece,
accepts 4 each 3/64" # 2 small ball end cables, internally
threaded 3/8-IP.
GR-1/4-20-3&4 Cable coupler, three piece, accepts
4 each 3/64", 1/1 6", 5/64", 3/32", 2.5mm.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
16
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Machined Back Plates, Nickel Plated, for mounting to walls, ceilings, and floors.
CC-1/4-IP-BPDiameter 1.25", center externally
threaded 1/4-IP. Uses Cable Couplers. Mounts with center screw, not included.
CC-1/8-IP-BP-2HDiameter 1.60", center externally
threaded 1/8-IP. Uses Cable Couplers. Mounts with 2 screws, not included.
CC-1/8-IP-BPDiameter 1.25", center externally
threaded 1/8-IP. Uses Cable Couplers. Mounts with center screw, not Included.
CC-1/4-IP-BP-2HDiameter 1.60", center externally
threaded 1/4-IP. Uses Cable Couplers. Mounts with 2 screws, not included.
White or Black Canopies for mounting to J Boxes, ceilings, and walls
CAN-5-2-B Black pre-finished metal canopy, 5" diameter, center
hole slips 1/8-IP, .400" diameter, cord hole .620" diameter, poly bagged.
CAN-5-2-W White pre-finished metal canopy, 5" diameter, center
hole slips 1/8-IP, .400" diameter, cord hole .620" diameter, poly bagged.
CAN-5-1-B Black pre-finished metal canopy, 5" diameter, center
hole slips 1/8-IP, .400" diameter, poly bagged.
CAN-5-1-W White pre-finished metal canopy, 5" diameter, center
hole slips 1/8-IP, .400" diameter, poly bagged.
CAN-2-1-B Black pre-finished metal canopy, 2" diameter, center
holes slips 1/8-IP, .400" diameter, poly bagged.
CAN-2-1-W White pre-finished metal canopy, 2" diameter, center
holes slips 1/8-IP, .400" diameter, poly bagged.
T Bars, J-Boxes, Clips, and J-Box Straps
TBC-E T Bar Clip, 1/4-20 stud on bottom
TBC-WP Wraparound support clip for T bar
BB-1/4-20-HD Heavy duty j-box strap with ground screw.
Tapped 1/4-20, includes 1 " stud.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
17
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Machined Back Plates, Nickel Plated, for mounting to walls, ceilings, and floors.
LN-1/4-20 1/4-20 Keps nut
LN-1/8-IP 1/8 IP Panel hex nut
KN-1/8-IP Kurled lock nut1/8 IP
LN-5/16-24 5/16 Panel hex nut for MICRO-GR
LN-1/4-IP 1/4 IP Hex nut
LN-3/8-IP 3/8 IP Hex nut
LN-1/2-IP 1/2 IP Panel Hex nut
Bulk Cable on Spools
Lock Nuts
C-3/64-GCable, galvanized 3/64", 7X7 X 1000"
C-1/16-GCable, galvanized 1/16", 7X7 X 1000"
C-5/64-GCable, galvanized 5/64", 7X7 X 1000"
C-3/32-GCable, galvanized 3/32", 7X7 X 1000"
C-1/8-GCable, galvanized 1/8", 7X7 X 1000"
Special Order
C-3/64-SSCable, stainless steel 3/64", 7X7 X 1000"
C-1/16-SSCable, stainless steel 1/16", 7X7 X 1000"
C-5/64-SSCable, stainless steel 5/64", 7X7 X 1000"
C-3/32-SSCable, stainless steel 3/32", 7X7 X 1000"
Accessory Adapters, Bolts with through holes, Screws, Hooks, etc.
Hook M4 Small Hook for MGR-SE-M4 gripper. Can be closed with pliers.
Hook 1/4-20 Large Hook externally threaded 1/4-20 for holding banners, signs, etc.
For use with MGR-SE-1/4-20 gripper.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
18
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Accessory Adapters, Bolts with through holes, Screws, Hooks, etc.
BH-1/4-20-1/4 Knurled head bolt, drilled for 1/16" cable, 1/4"-long,
1/4-20 thread
BH-1/4-20-1/2 Knurled head bolt, drilled for 1/16" cable, 1/2"-long,
1/4-20 thread
BS-1/4-20 Knurled screw 1/4-20 X 1/4" long with cross slot for
cross cable assemblies
AS-3/8 X 1/8-IP Adapter Stem, internally threaded 5/16" for Micro GR
Grippers and externally threaded 3/8"-16 Used with toggle-3/8"
AS-3/8 X 5/16 Adapter Stem, internally threaded 1/8" IP for
MGR-1/8"-IP Grippers and externally threaded 3/8"-16 Used with toggle-3/8"
LAG-1/4-20 Hanger Bolt 2" overall length 1/4-20 X wood screw
TOG-1/4-20 Toggle Wing. 1/4-20 X 3" for drywall applications
TOG-3/8 Only Toggle Wing, 3/8 for Adapter Stems AS-3/8 X 5/16
&1/8-IP
Ball 1/4-20 Small ball with 1/4-20 thread for use with MGR-
SE-1/4-20 gripper
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
19
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Deluxe S/S Cable Assemblies with# 1 die cast end and fuse cut
Galvanized cables can be supplied on request.
Cable, 3/64" with fuse cut and # 1 die cast end
C-3/64-24-SSCable, 7x7 stainless steel,
3/64 X 24" with stop.
C-3/64-36-SSCable, 7x7 stainless steel,
3/64 X 36" with stop
C-3/64-50-SSCable, 7x7 stainless steel,
3/64 X 50" with stop
C-3/64-72-SSCable, 7x7 stainless steel,
3/64 X 72" with stop
C-3/64-100-SSCable, 7x7 stainless steel,
3/64 X 100" with stop
C-3/64-120-SSCable, 7x7 stainless steel,
3/64 X 120" with stop
C-3/64-150-SSCable, 7x7 stainless steel,
3/64 X 150" with stop
Cable, 1/16" with fuse cut and # 1 die cast end C-1/16-12-SS
Cable, 7x7 stainless steel, 1/16" X 12" with stop
C-1/16-18-SSCable, 7x7 stainless steel,
1/16" X 18" with stop
C-1/16-24-SSCable, 7x7 stainless steel,
1/16" X 24" with stop
C-1/16-36-SSCable, 7x7 stainless steel,
1/16" X 36" with stop
C-1/16-50-SSCable, 7x7 stainless steel,
1/16" X 50" with stop
C-1/16-72-SSCable, 7x7 stainless steel,
1/16" X 72" with stop
C-1/16-100-SSCable, 7x7 stainless steel,
1/16" X 100" with stop
C-1/16-120-SS Cable, 7x7 stainless steel,
1/16" X 120" with stop
C-1/16-150-SSCable, 7x7 stainless steel,
1/16" X 150" with stop
C-1/16-200-SS Cable, 7x7 stainless steel,
1/16" X 200" with stop
C-1/16-250-SSCable, 7x7 stainless steel,
1/16" X 250" with stop
C-1/16-300-SS Cable, 7x7 stainless steel,
1/16" X 300" with stop
C-1/16-350-SSCable, 7x7 stainless steel,
1/16" X 350" with stop
Cable, 5/64" with fuse cut and # 1 die cast end
C-5/64-36-SSCable, 7x7 stainless steel,
5/64" X 36" with stop
C-5/64-50-SSCable, 7x7 stainless steel,
5/64" X 50" with stop
C-5/64-72-SSCable, 7x7 stainless steel,
5/64" X 72" with stop
C-5/64-120-SSCable, 7x7 stainless steel,
5/64" X 120" with stop
C-5/64-150-SSCable, 7x7 stainless steel,
5/64" X 150" with stop
C-5/64-250-SSCable, 7x7 stainless steel,
5/64" X 250" with stop
Cable, 3/32" with fuse cut and # 1 die cast end
C-3/32-24-SSCable, 7x7 stainless steel,
3/32" X 24" with stop
C-3/32-120-SSCable, 7x7 stainless steel,
3/32" X 120" with stop
C-3/32-36-SSCable, 7x7 stainless steel,
3/32" X 36" with stop
C-3/32-150-SSCable, 7x7 stainless steel,
3/32" X 150" with stop
C-3/32-50-SSCable, 7x7 stainless steel, 3/32"
X 50" with stop
C-3/32-200-SSCable, 7x7 stainless steel, 3/32"
X 200" with stop
C-3/32-72-SSCable, 7x7 stainless steel,
3/32" X 72" with stop
C-3/32-250-SSCable, 7x7 stainless steel,
3/32" X 250" with stop
C-3/32-100-SSCable, 7x7 stainless steel,
3/32" X 100" with stop
C-3/32-300-SSCable, 7x7 stainless steel,
3/32" X 300" with stop
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
20
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Galvanized cables can be supplied on request.
Cable with die cast end #2 1/2 ball on both ends
C-1/16-6-1-ENDCable, 1/16 X 6" length, with #2 1/2
ball ends.
C-1/16-12-ENDS Cable, 1/16 X 12" length, with #2 1/2 ball ends.
C-1/16-18-2-ENDSCable, 1/16 X 18" length, with #2 1/2 ball ends.
Cable with #2 1/2 ball end and fuse cut
C-3/64-36-1/2-SBCable, 3/64 X 36" length . #2 1/2 ball end with fuse cut.
For use with multiple cable
C-3/64-72-1/2-SBCable, 3/64 X 72" length . #2 1/2 ball end with fuse cut.
For use with multiple cable
C-3/64-100-1/2-SBCable, 3/64 X 100" length . #2 1/2 ball end with fuse
cut. For use with multiple cable
Galvanized cables can be supplied on request.
Cable, CC-1/4-20 on one end and a #3 die cast eye
C-1/16-3-EYE-CCCable, 1/16" diameter, 3" length with
CC-1/4-20 cable coupler and die cast eye #3.
C-3/32-4.5-EYE-CC-1/ 4-20Cable, 3/32" diameter, 4.5" length with
CC-1/4-20 cable coupler and die cast eye #4.
Cables with die cast eyes stop #3 and #4
C-3/64-24-EYECable, 3/64 X 24".
Die cast eye end # 3 with fuse cut.
C-3/64-72-EYECable, 3/64 X 72".
Die cast eye end # 3 with fuse cut.
C-3/64-120-EYECable, 3/64 X 120".
Die cast eye end # 3 wih fuse cut.
C-1/16-8.5-EYECable, 1/16" X 8.5" length with
die cast eye ends # 3. Used as safely cable.
C-1/16-12-EYECable, 1/16" X 12" length with
die cast eye ends # 3. Used as safety cable.
C-1/16-24-EYECable, 1/16" X 24" length with
die cast eye ends # 3. Used as safety cable.
C-3/32-50-2-EYECable, 3/32" X 50" length with 2 each die cast eye ends # 4.
Used as safety cable.
Cable, 1/32" with fuse cut and #2 1/2 ball
C-1/32-50-SS-SBCable, 7X7 stainless steel, 1/32 X 50” with stop
C-1/32-120-SS-SBCable, 7X7 stainless steel, 1/32 X 120” with stop
C-1/32-250-SS-SBCable, 7X7 stainless steel, 1/32 X 250” with stop
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
21
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Cutter, Stop Sleeves, Ferrules, Wire Rope Clips, etc.
CSS-3/64 Copper stop sleeves for 3/64" cable
CSS-1/16 Copper stop sleeves for 1/16" cable
CSS-5/64 Copper stop sleeves for 5/64" cable
CSS-3/32 Copper stop sleeves for 3/32" cable
CDF-3/64 Copper duplex ferrules for 3/64" cable
CDF-1/16 Copper duplex ferrules for 1/16" cable
CDF-5/64 Copper duplex ferrules for 5/64" cable
CDF-3/32 Copper duplex ferrules for 3/32" cable
Cable Loops, barrel with set screws
CL-1/16Cable Loop sleeve with set screws for
3/64" and 1/16"
CL-3/32Cable Loop sleeve for 3/32" cable
SC-1 Shaft collar lock with set screw
Kwik Lock Connectors for make a loop with cable. Tooless for easy removeable and can be reused
KL-100 Kwik Lock for 1/16" and 3/32"
cable. Working load for 1/16" is 75 Lbs. Working load for 3/32"
is 150 Lbs.
KL-150 Kwik Lock for 3/32" and 1/8"
cable. Working load for 3/32" is 150 Lbs. Working load for 1/8"
is 250 Lbs.
KL-200 Kwik Lock for 1/8" and 3/16"
cable. Working load for 1/8" is 250 Lbs. Working load for 3/16"
is 640 Lbs.
KL-75 Kwik Lock for /16" cable.
Working load for 1/16" is 75 Lbs.
KL-600 Kwik Lock for 1/4" cable.
Working load for 1/4" is 1,000 Lbs.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
22
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Side Exit Grippers for 3/64" (1.19mm) and 1/16" (1.59mm) Cable, with bottom cross cable option.
MGR-SE-1/4-20-BS Cable exits out the side of gripper.
Bottom of gripper slotted for cable pass through and tapped with 1/4-20 alien thumbscrew (included).
Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-CHS Cables exits out both sides of gripper at 45 degrees.
Approximately 1-1/4" height X 3/8" diameter. Call factory for complete assembly pricing.
Requires special cable ends.
MGR-SE-TH-SN Cable exits out the side of gripper. Threaded plunger has safety nut.
Bottom of gripper has hole for cable pass through and tapped for M4 set screw (included)
Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-TB-SN Cable exits out the side of gripper.
Bottom of gripper tapered with Phillips set screw on bottom. Cross hole for horizontal 1/16" cable.
Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-TH Cable exits out the side of gripper. Plunger is smooth, no safety nut.
Bottom of gripper has hole for cable pass through and tapped for M4 set screw (included).
Approximately 1-1/4" height X 3/8" diameter.
MGR-SE-BULLET Cable exits out the side of gripper.
Bottom of gripper tapered with Phillips set screw on bottom. Cross hole for horizontal 1/16" cable.
Approximately 1-1/4" height X 3/8" diameter.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
23
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
StyleOverall length including 6"
stripped ends
ColorWhite or
Black
Diameter+-0.005
StyleAWM
3 Conductor SPC-18/3-60- 60" SPECIFY 0.245"SPC-18/3-84- 84" SPECIFY 0.245"SPC-18/3-112- 112" SPECIFY 0.245"SPC-18/3-162- 162" SPECIFY 0.245"SPC-18/3-212- 212" SPECIFY 0.245"SPC-18/3-262- 262" SPECIFY 0.245"
4 Conductor SPC-18/4-60- 60" SPECIFY 0.255"SPC-18/4-84- 84" SPECIFY 0.255"SPC-18/4-112- 112" SPECIFY 0.255"SPC-18/4-162- 162" SPECIFY 0.255"SPC-18/4-212- 212" SPECIFY 0.255"SPC-18/4-262- 262" SPECIFY 0.255"
5 Conductor SPC-18x3+22x2-60- 60" SPECIFY 0.245"SPC-18x3+22x2-84- 84" SPECIFY 0.245"SPC-18x3+22x2-112- 112" SPECIFY 0.245"SPC-18x3+22x2-162- 162" SPECIFY 0.245"SPC-18x3+22x2-212- 212" SPECIFY 0.245"SPC-18x3+22x2-262- 262" SPECIFY 0.245"
6 Conductor SPC-18x4+22x2-60- 60" SPECIFY 0.27"SPC-18x4+22x2-84- 84" SPECIFY 0.27"SPC-18x4+22x2-112- 112" SPECIFY 0.27"SPC-18x4+22x2-162- 162" SPECIFY 0.27"SPC-18x4+22x2-212- 212" SPECIFY 0.27"SPC-18x4+22x2-262- 262" SPECIFY 0.27"
CUSTOM CORDS AVAILABLE ON REQUEST WITH A LEAD TIME OF 5-8 WEEKS Minimum quantities apply.
ModelOverall length60" /84" /112" /162" /212" /262"
Color White or Black
Diameter+-0.005 Style
3 Conductor PC-18/3- Specify L. " Specify L. " 0.33" SJT
4 Conductor PC-18/4- Specify L. " Specify L. " 0.33" SJT
5 Conductor PC-18/5- Specify L. " Specify L. " 0.37" SJT
6 Conductor PC-18/6- Specify L. " Specify L. " 0.37" SJT
Standard 0.33" to 0.37" Dia. Flexible Power Cords. SJT UL 105 C, 300V. White & Black. 18/3, 18/4, 18/5, 18/6
Super Slim 0.25" Dia. Power Cord - Cut & Stripped. 3, 4, 5, and 6 Conductor. E206787 AWM 20811 105C 600V, AWM 2661 105°C 300V. Suitable for wet locations "RoHS", US made.
Power Cord, Cut & Stripped - Standard lengths 60", 84", 112", & 162", 212", 262".
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
24
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Decorative braided metallic power cord: New construction is thinner and more flexible.The series is offered in AWM (appliance wiring material) and SJT (flexible power cord) constructions. There are versions of 3, 4, and 5 conductors, solid or stranded with 300 volt and 600 volt insulation. SJT cord provides a better looking, more decorative finish.
PC-18/3-BR-300V 3 CONDUCTORS 18 AWG stranded wire, braided cord. Colors: BLACK - WHITE - GREEN. DIA. 0.240". 300V. 500' spool.
SJT style Clear PVC jacket over metallic braid slim flexible power cord. 105C. RoHS. Embossed with UL number and information.
PC-18/3-BR-600V 3 CONDUCTORS 18 AWG stranded wire, braided cord. Colors: BLACK - WHITE - GREEN. DIA. 0.290". 600V. 500' spool.
PC-18/4-BR-300V 4 CONDUCTORS 18 AWG SHIELDED stranded wire, braided cord. Colors: BLACK - WHITE - RED - GREEN. DIA. 0.255". 300V. 500' spool.
PC-18/4-BR-600V 4 CONDUCTORS 18 AWG SHIELDED stranded wire, braided cord. Colors: BLACK - WHITE - REDS - GREEN. DIA. 0.255". 600V. 500' spool.
PC-18/5-BR-600V 5 CONDUCTORS 18 AWG SHIELDED stranded wire, braided cord. Colors: BLACK - WHITE - GREEN - VIOLET - GREY. DIA. 0.335". 600V. 500' spool.
PC-18/3-BR-SJT 3 CONDUCTORS 18 AWG stranded wire, braided cord. Colors: BLACK - WHITE - GREEN. DIA. 0.25". 300V. 500' per spool.
PC-18/4-BR-SJT 4 CONDUCTORS 18 AWG stranded wire, braided cord. Colors: BLACK - WHITE - RED - GREEN. DIA. 0.315". 600V. 500' per spool.
PC-18/5-BR-SJT 5 CONDUCTORS 18 AWG SHIELDED stranded wire, braided cord. Colors: BLACK - WHITE - RED - GREEN. DIA. 0.33". 600V. 500' per spool.
SPECIAL ORDER
SPOOLED Braided Power Cord - 500' spools
AWM style Clear PVC jacket over metallic braid slim flexible power cord. 105C. RoHS. Embossed with UL number and information.
Cable and Cord Holders
CCH-9/32 Cable and cord holder with
thumb screw for tensioning on cable. Cord hole is.275".
CTO Invisible Silicone "O" ring Cable
and cord holder. Slips onto Cord - cable slides in, provides
tool-less adjustability.
CT-W Cable tie, white for
attaching cord to cable.
SR-W Strain Relief White for power
cord.Fits CAN-5-2-W.
SC-W Snap clip, white for
retaining cord and cable.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
25
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
Model
Overall Lengthexcludingplunger
Outside Diameterof Body
(maximum)
OutsideDiameterof Thread
Outside Thread
Inside Thread Hole Size
NANO-GR 0.551 M6 M6NANO-SE-8/32 0.902 0.277 8/32
MGR-PH 1.355 0.352MICRO-GR 0.4725 0.35 0.305 5/16-24 +5/16MGR-1/4-20 1.254 0.4 0.238 1/4-20 1/4
MGR-M6-MM 0.835 0.392 0.227 M6 1/4MGR-10/32 1.172 0.402 0.185 10/32 1/4
MGR-1/8-IP-S 0.669 0.498 0.3835 1/8-IP 7/16MGR-1/8-IP-ALL 1.05 0.3835 0.3835 1/8-IP 7/16MGR-M10 MM 0.675 0.47 0.388 M10 7/16MGR-1/8-IP-GS 0.666 0.63 0.383 1/8-IP 7/16
MGR-1/4-IP-SR-SN 0.722 0.75 0.516 1/4-IP 9/16GR-LD 1.38 0.566
GR-1/4-IP 0.795 0.744 0.516 1/4-IP 9/16GR-1/4-IP-TN 0.785 0.744 0.516 1/4-IP 9/16
GR-1/4-IP-TN-R1 0.854 0.879 0.516 1/4-IP 9/16GR-1/4-IP-ALL 0.785 0.744 0.516 1/4-IP 9/16GR-1/4-IP-REC 0.79 0.51 1/4-IP 9/16GR-1/4-20-LD 1.90 0.458 0.244 1/4-20
GR-3/8-IP 0.795 0.885 0.655 3/8-IP 11/16GR-3/32-LP 0.75 0.45
MGR-1/8-IP-REC .67 0.38 1/8-IP 7/16MGR-SE-1/4-20 1.27 0.389 0.25
MGR-SE-1/4-20-EXT 1.663 0.389 0.241 1/4-20 1/4MGR-SE-BULLET 1.44 0.355 M4
MGR-SE-8/32 1.27 0.389 8/32MGR-SE-1/8-IP 1.42 0.389 0.389 1/8-IP 1/8-IP 7/16
MGR-SE-BF 1.49 0.36MGR-SE-M4 1.132 0.352 M4
MGR-SE-1/4-20-BS 1.27 0.389MGR-SE-TH 1.132 0.352
MGR-SE-8/32-SH 1.39 0.35 8/32MGR-SE-TH-SN 1.52 0.354MGR-SE-CHS 1.27 0.389
MGR-SE-ADJ-1/4-20-EXT 2.167 0.398 0.236 1/4-20MGR-SE-BULLET 1.44 0.355 M4MGR-SE-HOOK 2.01 0.35 M4
MGR-SE-HOOK-LG 2.83 0.39MGR-SE-HOOK-SL 2.25 0.35
MGR-SE-TB-SN 1.69 3.55MGR-SE-ADJ-8/32 1.44 0.389 8/32
MGR-SE-ADJ-1/4-20 1.45 0.389 1/4-20MGR-1/16-LP 0.63 0.39
GR-SE-1/4 X 1/8-IP 2.12 0.53 1/4-20GR-SE-ThumbScrew 2.53 0.455 M6
GR-SE-BF 0.21 0.511GR-SE-BS 2.25 0.474 M6CC-1/4-20 1 0.46 1/4-20CC-1/8-IP 1 0.46 1/8-IP
CC-1/4-20-R1 1 0.354 1/4-20CC-1/4-20-PL 1 0.435 1/4-20CC-1/4X 1/8-IP 1 0.493 0.389 1/8-IP 1/4-20
CC-Slot 0.833 0.589 0.516 1/4-IP 1/4-20CC-SE-CAP 1.29 0.63 1/8-IP 8/32
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
26
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
251. LAYOUT THE FIXTURES AS INDICATED ON PLANS. PREPARE MOUNTING LOCATIONS.
2. MOUNTING LOCATIONS WITH ELECTRICL BOXATTACH 1/4-20 STUD TO STRAP AND MOUNT AT CEILNG LEVEL HOLE. WIRE CORD,PASS THRU POWER FEED HOLE IN CANOPY.
BE CERTAIN ELECTRICAL BOX IS SUPPORTED BY STRUCTURAL CEILING
3. MOUNT ADJUSTABLE AIRCRAFT CABLE FITTING TO FIXTURE
4. FEED AIRCRAFT CABLE THRU MOUNTING FITTING (CANOPY SIDE) SWAGE END ISON CANOPY SIDE, THEN FEED NON-SWAGE END THRU TOP OF ADJUSTABLE AIRCRAFTCABLE FITTING (COMPRESS TOP OF FITTING TO FEED BABLE THRU)
5. CONNECT MOUNTING FITTING TO STUD ON CANOPY SIDE
6. SCREW KNURLED FITTING OVER TOP OF VISABLE THREADS ON MOUNTING FITTING, TIGHTEN TO LOCK CANOPY INTO PLACE.
7. LEVEL FIXTURE BY COMPRESSING KNURLED FITTING ON ADJUSTABLE FITTING(FIXTURE SIDE) AND FEEDING CABLE IN OR OUT TILL LEVEL. WHEN LEVEL TIGHTENKNURLED NUT TO LOCK IN PLACE.
8. REPEAT STEPS 2 THRU 7 AT OTHER MOUNTING LOCATIONS.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
26
Non Power Feed CrossCable System with 1/4 x 20 Studs
Non Power Feed CrossCable System with 1/4 x 20 Toggles
Power Feed Cross Cable System with 1/4 x 20 Studs
Power Feed Cross Cable System with 1/4 x 20 Toggles
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
6
.
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
Grippers for 5/64" (2 mm) and 3/32” (2.38mm)
.
MGR-10 MMMini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in Metric 10 mm hole (7/16" diameter).
Mounting depth .575". Mounting nut not included.
MGR-1/8-IP-GSMini Gripper, for 1/16" cable. Cable exits out bottom of
gripper. Mounts in 1/8-IP hole (7/16" diameter). Mounting depth .575". Designed for glass shelving.
Mounting nut (included).
MGR-1/4-IP-SR-NSNMini Gripper, for 1/16" cable. Cable exits out the bottom of gripper. Flats on side for open
end wrench mounting. Mounts in 9/16" diameter hole. Mounting depth .350".
Mounting nut ( LN-1/4-IP) not included.
GR-1/4-IPGripper, for 5/64" and 3/32" cable. Cable exits out the bottom of gripper. Flat on side for open end wrench mounting. Mounts in 9/16” diameter hole. Mounting depth .675”. Mounting nut (LN-1/4-IP) not included.
GR-3/8 IPGripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 11/16" diameter hole. Mounting depth .675". Mounting nut (LN-3/8-IP nut)
not included.
GR-1/4-IP-TNGripper, for 5/64" and 3/32" cable. Cable exits out the
bottom of gripper. Mounts in 9/16" diameter hole. Mounting depth .1". Secures with 1/4-IP
checkered nut (included).
GR-1/4-IP-ALLGripper, for 5/64" and 3/32" cable. Continous Outside thread of 1/4-IP.
Mounts in 9/16" diameter hole. Overall length .750". Mounting nut (LN-1/4-IP)
not included.
GR-1/4- IP-TN -R1Gripper, for 5/64" and 3/32" cable. Cable
exits out bottom of gripper. Mounts in 9/16" diameter hole. Designed for shelves, strut, and thick mounting
surfaces. Thread height .750”. Secures with 1/4-IP checkered nut (included).
GR-3/32-LPLooping Gripper securely grips 5/64” and 3/32” aircraft cable in a loop and allows for quick tool-less adjustment.
For wrapping cable around beams and joists.
GR-1/4-20-LDGripper, for 5/64", 3/32", and 2.5mm
cable. Cable exits out bottom ofgripper with 1/4-20 external thread.
Requires 1/4" diameter mounting hole.Mounting nut (LN-1/4-20) not included.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
251. LAYOUT THE FIXTURES AS INDICATED ON PLANS. PREPARE MOUNTING LOCATIONS.
2. MOUNTING LOCATIONS WITH ELECTRICL BOXATTACH 1/4-20 STUD TO STRAP AND MOUNT AT CEILNG LEVEL HOLE. WIRE CORD,PASS THRU POWER FEED HOLE IN CANOPY.
BE CERTAIN ELECTRICAL BOX IS SUPPORTED BY STRUCTURAL CEILING
3. MOUNT ADJUSTABLE AIRCRAFT CABLE FITTING TO FIXTURE
4. FEED AIRCRAFT CABLE THRU MOUNTING FITTING (CANOPY SIDE) SWAGE END ISON CANOPY SIDE, THEN FEED NON-SWAGE END THRU TOP OF ADJUSTABLE AIRCRAFTCABLE FITTING (COMPRESS TOP OF FITTING TO FEED BABLE THRU)
5. CONNECT MOUNTING FITTING TO STUD ON CANOPY SIDE
6. SCREW KNURLED FITTING OVER TOP OF VISABLE THREADS ON MOUNTING FITTING, TIGHTEN TO LOCK CANOPY INTO PLACE.
7. LEVEL FIXTURE BY COMPRESSING KNURLED FITTING ON ADJUSTABLE FITTING(FIXTURE SIDE) AND FEEDING CABLE IN OR OUT TILL LEVEL. WHEN LEVEL TIGHTENKNURLED NUT TO LOCK IN PLACE.
8. REPEAT STEPS 2 THRU 7 AT OTHER MOUNTING LOCATIONS.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
26
Non Power Feed CrossCable System with 1/4 x 20 Studs
Non Power Feed CrossCable System with 1/4 x 20 Toggles
Power Feed Cross Cable System with 1/4 x 20 Studs
Power Feed Cross Cable System with 1/4 x 20 Toggles
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
6
.
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
Grippers for 5/64" (2 mm) and 3/32” (2.38mm)
.
MGR-10 MMMini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in Metric 10 mm hole (7/16" diameter).
Mounting depth .575". Mounting nut not included.
MGR-1/8-IP-GSMini Gripper, for 1/16" cable. Cable exits out bottom of
gripper. Mounts in 1/8-IP hole (7/16" diameter). Mounting depth .575". Designed for glass shelving.
Mounting nut (included).
MGR-1/4-IP-SR-NSNMini Gripper, for 1/16" cable. Cable exits out the bottom of gripper. Flats on side for open
end wrench mounting. Mounts in 9/16" diameter hole. Mounting depth .350".
Mounting nut ( LN-1/4-IP) not included.
GR-1/4-IPGripper, for 5/64" and 3/32" cable. Cable exits out the bottom of gripper. Flat on side for open end wrench mounting. Mounts in 9/16” diameter hole. Mounting depth .675”. Mounting nut (LN-1/4-IP) not included.
GR-3/8 IPGripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 11/16" diameter hole. Mounting depth .675". Mounting nut (LN-3/8-IP nut)
not included.
GR-1/4-IP-TNGripper, for 5/64" and 3/32" cable. Cable exits out the
bottom of gripper. Mounts in 9/16" diameter hole. Mounting depth .1". Secures with 1/4-IP
checkered nut (included).
GR-1/4-IP-ALLGripper, for 5/64" and 3/32" cable. Continous Outside thread of 1/4-IP.
Mounts in 9/16" diameter hole. Overall length .750". Mounting nut (LN-1/4-IP)
not included.
GR-1/4- IP-TN -R1Gripper, for 5/64" and 3/32" cable. Cable
exits out bottom of gripper. Mounts in 9/16" diameter hole. Designed for shelves, strut, and thick mounting
surfaces. Thread height .750”. Secures with 1/4-IP checkered nut (included).
GR-3/32-LPLooping Gripper securely grips 5/64” and 3/32” aircraft cable in a loop and allows for quick tool-less adjustment.
For wrapping cable around beams and joists.
GR-1/4-20-LDGripper, for 5/64", 3/32", and 2.5mm
cable. Cable exits out bottom ofgripper with 1/4-20 external thread.
Requires 1/4" diameter mounting hole.Mounting nut (LN-1/4-20) not included.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
27
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
26
Non Power Feed CrossCable System with 1/4 x 20 Studs
Non Power Feed CrossCable System with 1/4 x 20 Toggles
Power Feed Cross Cable System with 1/4 x 20 Studs
Power Feed Cross Cable System with 1/4 x 20 Toggles
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
6
.
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
Grippers for 5/64" (2 mm) and 3/32” (2.38mm)
.
MGR-10 MMMini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in Metric 10 mm hole (7/16" diameter).
Mounting depth .575". Mounting nut not included.
MGR-1/8-IP-GSMini Gripper, for 1/16" cable. Cable exits out bottom of
gripper. Mounts in 1/8-IP hole (7/16" diameter). Mounting depth .575". Designed for glass shelving.
Mounting nut (included).
MGR-1/4-IP-SR-NSNMini Gripper, for 1/16" cable. Cable exits out the bottom of gripper. Flats on side for open
end wrench mounting. Mounts in 9/16" diameter hole. Mounting depth .350".
Mounting nut ( LN-1/4-IP) not included.
GR-1/4-IPGripper, for 5/64" and 3/32" cable. Cable exits out the bottom of gripper. Flat on side for open end wrench mounting. Mounts in 9/16” diameter hole. Mounting depth .675”. Mounting nut (LN-1/4-IP) not included.
GR-3/8 IPGripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 11/16" diameter hole. Mounting depth .675". Mounting nut (LN-3/8-IP nut)
not included.
GR-1/4-IP-TNGripper, for 5/64" and 3/32" cable. Cable exits out the
bottom of gripper. Mounts in 9/16" diameter hole. Mounting depth .1". Secures with 1/4-IP
checkered nut (included).
GR-1/4-IP-ALLGripper, for 5/64" and 3/32" cable. Continous Outside thread of 1/4-IP.
Mounts in 9/16" diameter hole. Overall length .750". Mounting nut (LN-1/4-IP)
not included.
GR-1/4- IP-TN -R1Gripper, for 5/64" and 3/32" cable. Cable
exits out bottom of gripper. Mounts in 9/16" diameter hole. Designed for shelves, strut, and thick mounting
surfaces. Thread height .750”. Secures with 1/4-IP checkered nut (included).
GR-3/32-LPLooping Gripper securely grips 5/64” and 3/32” aircraft cable in a loop and allows for quick tool-less adjustment.
For wrapping cable around beams and joists.
GR-1/4-20-LDGripper, for 5/64", 3/32", and 2.5mm
cable. Cable exits out bottom ofgripper with 1/4-20 external thread.
Requires 1/4" diameter mounting hole.Mounting nut (LN-1/4-20) not included.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
251. LAYOUT THE FIXTURES AS INDICATED ON PLANS. PREPARE MOUNTING LOCATIONS.
2. MOUNTING LOCATIONS WITH ELECTRICL BOXATTACH 1/4-20 STUD TO STRAP AND MOUNT AT CEILNG LEVEL HOLE. WIRE CORD,PASS THRU POWER FEED HOLE IN CANOPY.
BE CERTAIN ELECTRICAL BOX IS SUPPORTED BY STRUCTURAL CEILING
3. MOUNT ADJUSTABLE AIRCRAFT CABLE FITTING TO FIXTURE
4. FEED AIRCRAFT CABLE THRU MOUNTING FITTING (CANOPY SIDE) SWAGE END ISON CANOPY SIDE, THEN FEED NON-SWAGE END THRU TOP OF ADJUSTABLE AIRCRAFTCABLE FITTING (COMPRESS TOP OF FITTING TO FEED BABLE THRU)
5. CONNECT MOUNTING FITTING TO STUD ON CANOPY SIDE
6. SCREW KNURLED FITTING OVER TOP OF VISABLE THREADS ON MOUNTING FITTING, TIGHTEN TO LOCK CANOPY INTO PLACE.
7. LEVEL FIXTURE BY COMPRESSING KNURLED FITTING ON ADJUSTABLE FITTING(FIXTURE SIDE) AND FEEDING CABLE IN OR OUT TILL LEVEL. WHEN LEVEL TIGHTENKNURLED NUT TO LOCK IN PLACE.
8. REPEAT STEPS 2 THRU 7 AT OTHER MOUNTING LOCATIONS.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
26
Non Power Feed CrossCable System with 1/4 x 20 Studs
Non Power Feed CrossCable System with 1/4 x 20 Toggles
Power Feed Cross Cable System with 1/4 x 20 Studs
Power Feed Cross Cable System with 1/4 x 20 Toggles
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
6
.
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
Grippers for 5/64" (2 mm) and 3/32” (2.38mm)
.
MGR-10 MMMini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in Metric 10 mm hole (7/16" diameter).
Mounting depth .575". Mounting nut not included.
MGR-1/8-IP-GSMini Gripper, for 1/16" cable. Cable exits out bottom of
gripper. Mounts in 1/8-IP hole (7/16" diameter). Mounting depth .575". Designed for glass shelving.
Mounting nut (included).
MGR-1/4-IP-SR-NSNMini Gripper, for 1/16" cable. Cable exits out the bottom of gripper. Flats on side for open
end wrench mounting. Mounts in 9/16" diameter hole. Mounting depth .350".
Mounting nut ( LN-1/4-IP) not included.
GR-1/4-IPGripper, for 5/64" and 3/32" cable. Cable exits out the bottom of gripper. Flat on side for open end wrench mounting. Mounts in 9/16” diameter hole. Mounting depth .675”. Mounting nut (LN-1/4-IP) not included.
GR-3/8 IPGripper, for 5/64" and 3/32" cable. Cable exits out bottom of gripper. Mounts in 11/16" diameter hole. Mounting depth .675". Mounting nut (LN-3/8-IP nut)
not included.
GR-1/4-IP-TNGripper, for 5/64" and 3/32" cable. Cable exits out the
bottom of gripper. Mounts in 9/16" diameter hole. Mounting depth .1". Secures with 1/4-IP
checkered nut (included).
GR-1/4-IP-ALLGripper, for 5/64" and 3/32" cable. Continous Outside thread of 1/4-IP.
Mounts in 9/16" diameter hole. Overall length .750". Mounting nut (LN-1/4-IP)
not included.
GR-1/4- IP-TN -R1Gripper, for 5/64" and 3/32" cable. Cable
exits out bottom of gripper. Mounts in 9/16" diameter hole. Designed for shelves, strut, and thick mounting
surfaces. Thread height .750”. Secures with 1/4-IP checkered nut (included).
GR-3/32-LPLooping Gripper securely grips 5/64” and 3/32” aircraft cable in a loop and allows for quick tool-less adjustment.
For wrapping cable around beams and joists.
GR-1/4-20-LDGripper, for 5/64", 3/32", and 2.5mm
cable. Cable exits out bottom ofgripper with 1/4-20 external thread.
Requires 1/4" diameter mounting hole.Mounting nut (LN-1/4-20) not included.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
28
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
7
.
Grippers for Recessed Fixtures 3/64” - 1/16” cable and 5/64, 3/32 and 2.5mm
Side Exit Grippers For 3/64" (1.19mm) and 1/16" (1.59mm) Cable
.
MGR-1/8-IP-RECMini Gripper, for 1/16" cable. For installing recessed fixtures. Cable can be
released by pulling on the grip nut on the bottom of the gripper. Mounts in 1/8”-IP
hole (7/16” diameter). Secures with a lock nut (LN 1/8”-IP) not included.
GR-1/4- IP-RECGripper, for 5/54", 3/32” and 2.5mm cable. For installing recessed fixtures. Cable
can be released by pulling on the grip nut on the bottom of the gripper. 1/4” IP. Mounts in a 9/16” hole. Secures with a lock nut
(LN 1/4”-IP) not included.
MGR-SE-BFGripper for 3/64” and 1/16” cable. Cable exits out side of gripper. No safety nut. Side screw included. Overall
length 1.49”. Outside diemeter is .36”.
MGR-SE-M4Cable exits out the side of gripper. Bottom of gripper internally tapped for M4 metric machine screw (not
included). No safety nut. Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-8/32Cable exits out the side of gripper. Bottom of gripper internally tapped for 8/32 stud or machine screw (not
included). Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-1/4-20Cable exits out the side of gripper. Bottom of gripper
internally tapped for 1/4-20 stud or machine screw (not included). Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-1/4-20-EXTCable exits out the side of gripper. Bottom of gripper is externally threaded 1/4-20.
No safety nut. Approximately 1-1/2” high X 3/8” diameter.
MGR-SE-1/8-IPCable exits out the side of gripper. Bottom of gripper externally threaded 1/8-IP and internally tapped for
1/4-20 stud or machine screw (not included). No safety nut. Approximately 1-1/4” height X 3/8” diameter.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
27
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
29
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
7
.
Grippers for Recessed Fixtures 3/64” - 1/16” cable and 5/64, 3/32 and 2.5mm
Side Exit Grippers For 3/64" (1.19mm) and 1/16" (1.59mm) Cable
.
MGR-1/8-IP-RECMini Gripper, for 1/16" cable. For installing recessed fixtures. Cable can be
released by pulling on the grip nut on the bottom of the gripper. Mounts in 1/8”-IP
hole (7/16” diameter). Secures with a lock nut (LN 1/8”-IP) not included.
GR-1/4- IP-RECGripper, for 5/54", 3/32” and 2.5mm cable. For installing recessed fixtures. Cable
can be released by pulling on the grip nut on the bottom of the gripper. 1/4” IP. Mounts in a 9/16” hole. Secures with a lock nut
(LN 1/4”-IP) not included.
MGR-SE-BFGripper for 3/64” and 1/16” cable. Cable exits out side of gripper. No safety nut. Side screw included. Overall
length 1.49”. Outside diemeter is .36”.
MGR-SE-M4Cable exits out the side of gripper. Bottom of gripper internally tapped for M4 metric machine screw (not
included). No safety nut. Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-8/32Cable exits out the side of gripper. Bottom of gripper internally tapped for 8/32 stud or machine screw (not
included). Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-1/4-20Cable exits out the side of gripper. Bottom of gripper
internally tapped for 1/4-20 stud or machine screw (not included). Approximately 1-1/4” height X 3/8” diameter.
MGR-SE-1/4-20-EXTCable exits out the side of gripper. Bottom of gripper is externally threaded 1/4-20.
No safety nut. Approximately 1-1/2” high X 3/8” diameter.
MGR-SE-1/8-IPCable exits out the side of gripper. Bottom of gripper externally threaded 1/8-IP and internally tapped for
1/4-20 stud or machine screw (not included). No safety nut. Approximately 1-1/4” height X 3/8” diameter.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
27
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
28
Looping Gripper Systemwith Toggles
Looping Gripper Systemwith Hooks
LOOPING GRIPPER
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
4Cable Series of Cable Cable Min. Breaking Max. Weight Max Weight
Diameter Inches Gripper Material Construction Pounds for 1 Cable for 2 Cable
Bottom Exit Grippers3/64 MICRO SS 7 X 7 135 27 541/16 MGR SS 7 X 7 312 62 1241/16 GR SS 7 X 7 217 42 843/32 GR SS 7 X 7 490 98 196
Side Exit Grippers3/64 MGR SS 7 X 7 122 25 501/16 MGR SS 7 X 7 157 31 631/16 GR SS 7 X 7 172 34 683/32 GR SS 7 X 7 369 74 148
TestingIndependent tests were performed by three professional engineering labs located throughout the United States. Their independent results were analyzed and the lowest amount for type of gripper and type of cable is listed and is shown in pounds. Cable Grippers recommends a safety factor of 80%. Therefore the weights listed for 1 or 2 cables are 20% of the minimum breaking results.
SpecificationsAll dimensions, weights, sizes, strengths and other specifications shown in this catalog are for reference only and subject to change without notice. CGI information regarding independent testing of its’ products are for informational purposes. Actual conditions may vary, and CGI recommends that users test their products with all the components of their system. The manufacturer and user of the end product are responsible for their applications, and compliance with all local, state, and federal safety regulations.
ManufacturingOur cable assembly manufacturing facility has produced millions of cable assemblies. We are proud of our products and our philosophy. It is our goal to offer quality suspension components at competitive prices.
Sales Policies and TermsAll sales are final. Open account terms will be extended to companies with approved credit. Terms are Net 30 days, unless otherwise noted, prices quoted are F.O.B. shipping point. All orders are subject to acceptance by Cable Grippers, Inc. We cannot be held responsible for delays or non fulfillment due to riot, fire, flood, strikes, or other causes beyond our control. All prices are subject to change without notice. Prices are based on costs and conditions on date of quotation and are subject to change by seller before final acceptance. All annual orders to be shipped complete within a one-year period from date of order.
WarrantyCable Grippers, Inc. products are unconditionally guaranteed against manufacturing defects. Any item found defective will be replaced or adjustment made provided we are notified promptly upon receipt. We reserve the right to request that an item be returned to us for examination and cannot be responsible for labor charges incurred in replacement of any item. Our liability for defects on any item shall not exceed its replacement cost to us. Debit memos will not be accepted without authorization from us. Please contact us for a RGA (return goods authorization). Cable Grippers, Inc. will not accept any liability arising from performance of product assembled by other parties.
With our many coupler styles (CC-1/4-20 shown) you can attach to anything you want to hang from:• J Boxes• T-Bars• UniStrut• Sheetrock• Masonary• Wood
With our many Cable Gripper styles (GR 1/4 IP TN shown) you can hang anything:• Drop Ceilings• Light Fixture Pendants• Signs• Displays• Shelves• Picture Frames
Kits of components are available, bagged and labled, to meet any customer requirement.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
30
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
30Seismic Bracing SystemThis system is designed to limit Pendant sway during a seismic event. Cable Grippers offer a simple and cost effective way to help limit property damage and serious injuries to people around them. It totally conforms to California Building Code. Remember nothing is 100% safe in an earthquake no matter how strong the cable and the connectors are. But you can always count on Cable Grippers for the best engineered and thought out system for your clients safety.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
2
Cable Grippers provide instant toolless height adjustment for drop ceilings, light fixtures, displays, signs and more. Radically reducing installation time and eliminating human error.
Cable Grippers easily slide up and down the cable with a touch of your finger tip.
Attach the product
you wish to hang. Grippers are
available for manydifferent connection
methods to hangany suspended
items.
How Cable Grippers Work
1. Simply push down the plunger and slide the gripper up and down the cable to the desired height.
2. Let go and it stops and automatically grips.
Stainless Steel Cable
THE GRIPPER
SUSPENSION KITSPOWER FEED
ISO 9001:2008
phon
e: 70
2.869
.0755
• fax
: 702
.543.2
305 •
web
: www.ca
blegri
ppers
.com • e
mail: sa
les@ca
blegri
ppers
.com
30Seis
mic Brac
ing Sys
tem
This
syste
m is de
signe
d to l
imit P
enda
nt sw
ay du
ring a
seism
ic ev
ent. C
able
Grippe
rs off
er a s
imple
and c
ost e
ffecti
ve w
ay to
help
limit p
ropert
y dam
age a
nd se
rious
injur
ies
to pe
ople
aroun
d the
m. It to
tally
confo
rms t
o Calif
ornia
Buildin
g Cod
e. Rem
embe
r noth
ing is
100%
safe
in an
earth
quak
e no m
atter
how st
rong t
he ca
ble an
d the
conn
ector
s
are. B
ut yo
u can
alway
s cou
nt on
Cab
le Grip
pers
for th
e bes
t eng
ineere
d and
thou
ght o
ut sy
stem fo
r you
r clien
ts sa
fety.
phon
e: 70
2.869
.0755
• fax
: 702
.543.2
305 •
web
: www.ca
blegri
ppers
.com • e
mail: sa
les@ca
blegri
ppers
.com
2
Cable
Grippers
provide i
nstan
t
toolless
height
adjus
tmen
t for d
rop
ceilin
gs, lig
ht fix
tures
, disp
lays,
signs
and m
ore. R
adica
lly re
ducing
instal
lation t
ime a
nd el
imina
ting
human
error.
Cable
Grippe
rs
easily
slide
up
and d
own t
he ca
ble
with a
touch
of yo
ur
finge
r tip.
Attach
the pr
oduc
t
you w
ish to
hang
.
Grippe
rs are
availa
ble fo
r man
y
differ
ent c
onne
ction
method
s to h
ang
any s
uspe
nded
items.
How C
able
Grippe
rs Work
1. Sim
ply pu
sh do
wn the
plun
ger a
nd sl
ide th
e
gripp
er up
and d
own t
he ca
ble to
the
desir
ed he
ight.
2. Le
t go a
nd it
stops
and a
utomati
cally
gri
ps.
Stainle
ss Stee
l Cab
le
THE GRIPPER
SUSPENSION K
ITS
POWER FEED
ISO 9001
:2008
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
5
.
Micro Grippers for 3/64" cable (1.19 mm)
Mini Grippers for 3/64" (1.19 mm) and 1/16" (1.59 mm)
.
MGR-PHPicture Hook (integral) on bottom of gripper. Designed for hanging pictures and grabbing picture cross wire
MICRO-GR-SNMicro Gripper for use with 3/64" cable (1 mm). Cable
exits out bottom of gripper. Mounts in 5/16" hole. Mounting Depth .385". Mounting nut (LN-5/16)
included.
MICRO-GRMicro Gripper for use with 3/64" cable (1 mm). Cable
exits out bottom of gripper. Mounts in 5/16" hole. Mounting Depth .385". Mounting nut (LN-5/16) included.
No safety nut on plunger.
MGR-10/32Mini Gripper, for 1/16" cable. Cable exits out bottom of
gripper with 10/32 external thread. Mounting nut included.
MGR-1/4-20Mini Gripper, for 1/16" cable. Cable exits out bottom of
gripper with 1/4-20 external thread. Requires 1/4" diameter mounting hole.
Mounting nut (LN-1/4-20) not included.
MGR-M6 MMMini Gripper, for 1/16" cable. Cable exits out bottom of gripper with M 6-Metric external thread. No safety nut. Requires 1/4" diameter mounting hole. Mounting nut
not included.
MGR-1/8-IP-SMini Gripper, for 1/16" cable. Cable exits out bottom of gripper. Mounts in 1/8-IP hole (7/16" diameter). Slot on
top for mounting. Edges knurled for grip with pliers. Mounting depth .575". Mounting nut (LN 1/8-IP) not
included.
MGR-1/16-LPLooping Gripper securely grips 3/64” and 1/16” aircraft
cable in a loop and allows for quick tool-less adjustment. For wrapping cable around beams and
joists.
MGR-1/8-ALLMini Gripper, for 1/16" cable. Body externally threaded 1/8-IP. Cable exits out bottom of gripper. Mounts in 1/8-IP hole (7/16" diameter). Overall length 1.05”".
Mounting nut (LN 1/8-IP) not included.
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
29
Seismic Bracing SystemThis system is designed to limit Pendant sway during a seismic event. Cable Grippers offer a simple and cost effective way to help limit property damage and serious injuries to people around them. It totally conforms to California Building Code. Remember nothing is 100% safe in an earthquake no matter how strong the cable and the connectors are. But you can always count on Cable Grippers for the best engineered and thought out system for your clients safety.
Return to Table of Contents
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
31
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
3Table of Content
About Our Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2&4Micro Grippers for 3/64” Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5Mini Grippers for 3/64” (1.19 mm) and 1/16” (1.59mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-6Grippers for 5/64” (2mm) and 3/32” (2.38 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6Grippers for Recessed Fixtures 3/64” 1/16” cable and 5/64”, 3/32” and 2.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7Side Exit Grippers for 3/64” (1.19mm) and 1/16” (1.59mm) Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7-8Side Exit Grippers for 5/64” (2mm) and 3/32” (2.38mm) Cable 2.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8Special Application Gripper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9Power Feed and Blank Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9Complete “V” assemblies for balancing the fixture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 101/16” Cross Cable for MGR-SE-1/4-20-BS of CC 1/16” Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11Looping Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11Engineering Samples and Custom Bagged Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 12-13Cable Couplers accept 3/64”, 1/16”, 5/64” and 3/32” cables with die cast ends #1 & # 2 . . . . . . . . . . . . . . . . . . . . page 13Barrel Style Cable Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14Mutliple 3/64” Cable Barrel Style Couplers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14Machined Black Plates, Nickle Plated for mounting to walls, ceilings, and floors . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15White Canopies for mounting to J Boxes, ceilings, and walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15T Bars J-Boxes, clips and J-Bx Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15Locknuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16Bulk Cable on Spool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16Accessory Adapters, Bolts with through holed, Screws, Hooks, etc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16-17Deluxe S/S Cable Assemblies with #1 die cast end and fuse cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18Cable with die case end#2 ball on both ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19Cable with #2 1/2 ball end and fuse out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19Cable, CC-1/4-20 on one end and a #3 die case eye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19Cables with die cast eyes stop #3 and #4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19Cutter, stop Sleeves, Ferrules, Wire Rope Clips, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20Cable Loops, barrel with set screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20Kwik Lock Connectors for make a loop with cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20Side Exit Grippers for 3/64” (1.19mm) and 1/16” (1.59mm) Cable, with bottom cross cable option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21Clear PVC jacket over metallic braid (tinned copper) AWM power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22Clear PVC jacket over metallic braid (tinned copper) SJT power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22AWM White Thin Power Cords. UL, 105 C, 300 volt. 18 guage, 4 conductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22SJT, Thick Style UL, 105 C, 300 Volt, 3, 4, 5 & 6 Conductors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23Cable and Cord Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23Model Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24Fixture Assembly Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 25-29Seismic Bracing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30GR-1/4-20-3&4 Cable Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 31
phone: 702.869.0755 • fax: 702.543.2305 • web: www.cablegrippers.com • email: [email protected]
31
How Cable Grippers Work
1. Simply push down the plunger and slide the gripper up and down the cable to the desired height.
2. Let go and it stops and automatically grips.
Return to Table of Contents
Visit our website at cablegrippers.com for technical product information and to keep up to date with
new innovations from Cable Grippers.
6647 Schuster St.
Las Vegas, NV 89118
Phone: 702.869.0755
Fax: 702.543.2305
www.cablegrippers.com
Email: [email protected]
MGR-PH Picture Hook.
MGR-SE-1/4-20-TH Square gripper for sign or
fixture mounting.
MGR-SE- Picture hooks.
Artwork and Shelving Suspension
GR-1/4-IP-TN-R1 for 5/64" and 3/32" cable.
MGR-1/8-IP-GS for glass or wood shelving,
1/16" cable.