product bulletin • healthcare facilities · pdf filefor healthcare facilities...

2
BioVex ® Disinfecting Solution For Healthcare Facilities Applications BioVex ® provides the operators of healthcare facilities a safe and convenient system to reduce the spread of blood borne pathogens and communicable infections from non-porous surfaces throughout their facilities. The proprietary blend of oxychloro chemistry of BioVex ® provides disinfection by attacking the surfaces of microbes and breaking them down. It works immediately on contact, and remains working until dried. No residual active compound is left behind so no rinsing is required. BioVex ® is also an excellent deodorizer. BioVex ® is designed to be diluted with a fixed amount of water to create an affordable yet effective sanitizer that can be used daily, or more often on problem contact areas or in special target areas. The simple system only requires that the included activator be mixed with the BioVex ® concentrate in its container. After a few seconds of mixing, the activated concentrate is then added to tap water as directed. It is then ready to go to work solving your sanitation challenges. P R O D U C T B U L L E T I N H E A L T H C A R E F A C I L I T I E S www.bio-cide.com 2650 Venture Drive, Norman, OK 73069 405.329.5556 405.329.2681 fax 800.323.1398 Bio-Cide International is ISO 9001:2008 certified BioVex ® is used in the following areas for disinfection and odor control: Patient rooms Examination Rooms Laboratories Ambulances Emergency Rooms Surgery BioVex ® is often used to treat mechanical and surgical beds, walls and floors, medical equipment, laboratory surfaces, restrooms, showers, water baths, whirlpools, wheelchairs, fixed equipment, laundry rinse and a broad range of other areas. Concentrate Properties Concentration: 2.00 – 2.10% available chlorine dioxide pH: 8.2 – 8.5 Solubility in Water: Complete Very Low Acute Toxicity (EPA CAT III) Non-Flammable, Non-Explosive, Stable Solution Concentration (ppm) Sanitizers CONCENTRATION OF SANITIZERS REQUIRED for >5 log reduction of Staphylococcus aureus in 60 seconds 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 BioVex ® Sodium hypochlorite Acidified Quat Microorganisms ANTIMICROBIAL EFFICACY OF BIOVEX® Control 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Pseudomonas aeruginosa Staplylococcus aureus Streptococcus faecalis Vancomycin resistant Enterococcus sp. BioVex ® Log Population Microorganisms ANTIVIRAL EFFICACY OF BIOVEX® Control 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Hepatitis C HIV Type 1 BioVex ® Log Population

Upload: duongxuyen

Post on 15-Mar-2018

220 views

Category:

Documents


2 download

TRANSCRIPT

BioVex®

Disinfecting SolutionFor Healthcare Facilities ApplicationsBioVex® provides the operators of healthcare facilities a safe and convenient system to reduce the spread of blood borne pathogens and communicable infections from non-porous surfaces throughout their facilities.

The proprietary blend of oxychloro chemistry of BioVex® provides disinfection by attacking the surfaces of microbes and breaking them down. It works immediately on contact, and remains working until dried. No residual active compound is left behind so no rinsing is required. BioVex® is also an excellent deodorizer.

BioVex® is designed to be diluted with a fixed amount of water to create an affordable yet effective sanitizer that can be used daily, or more often on problem contact areas or in special target areas.

The simple system only requires that the included activator be mixed with the BioVex® concentrate in its container. After a few seconds of mixing, the activated concentrate is then added to tap water as directed. It is then ready to go to work solving your sanitation challenges.

P R O D U C T B U L L E T I N • H E A L T H C A R E F A C I L I T I E S

www.bio-cide.com • 2650 Venture Drive, Norman, OK 73069405.329.5556 • 405.329.2681 fax • 800.323.1398

Bio-Cide International is ISO 9001:2008 certified

BioVex® is used in the following areas for disinfection and odor control:Patient rooms Examination Rooms Laboratories AmbulancesEmergency Rooms Surgery

BioVex® is often used to treat mechanical and surgical beds, walls and floors, medical equipment, laboratory surfaces, restrooms, showers, water baths, whirlpools, wheelchairs, fixed equipment, laundry rinse and a broad range of other areas.

Concentrate PropertiesConcentration: 2.00 – 2.10% available chlorine dioxidepH: 8.2 – 8.5Solubility in Water: CompleteVery Low Acute Toxicity (EPA CAT III)Non-Flammable, Non-Explosive, Stable Solution

Conc

entr

atio

n (p

pm)

Sanitizers

CONCENTRATION OF SANITIZERS REQUIREDfor >5 log reduction of Staphylococcus aureus in 60 seconds

1300

1200

1100

1000

900

800

700

600

500

400

300

200

100

0

BioVex® Sodium hypochlorite Acidified QuatMicroorganisms

ANTIMICROBIAL EFFICACY OF BIOVEX® Control8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Pseudomonasaeruginosa

Staplylococcusaureus

Streptococcusfaecalis

Vancomycinresistant

Enterococcus sp.

BioVex®

Log

Popu

latio

n

Microorganisms

ANTIVIRAL EFFICACY OF BIOVEX® Control8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

0.0

Hepatitis C HIV Type 1

BioVex®

Log

Popu

latio

n

BioVex® High Volume Station (HVS):• HVS is a low cost system that eliminates the need for manual mixing

and diluting and ensures consistent activation every time.• Efficiency is increased by automatically refilling the solution reservoir

with fresh active product as needed. This eliminates manual mixing, measuring, and spills.

• No electricity needed. The HVS is water-powered.• With only one water connection required to provide activation of

BioVex®, the system is easy to install.• Operation is not affected by changes in water pressure or flow.• Unit is simple to install, maintain, and adjust.• Exposure to concentrated product is safely eliminated.• On-demand dispensing eliminates waste.• Optional stand specifically designed for the HVS is available.

Comparison of BioVex® with Other Conventional Sanitizing Agents

BioVex®Sodium and Calcium Hypochlorite

Glutaraldehyde Idohpors

Quantenary Ammonium Compounds (409, Lysol, etc.)

Peracetic Acid

Performance High Moderate Moderate to High Moderate Moderate to High Moderate

Contact Time Minutes Minutes to Hours 30 Minutes to Several Hours

Minutes to Hours Minutes to Hours Minutes

Concentration 500 ppm 1,000 ppm to 1.0%

500 ppm to 1.0% 500 ppm to 1.0% 100 ppm to 1.0% 30-200 ppm

pH Near Neutral Alkaline Neutral Neutral to Acidic Acidic to Neutral Acidic

Corrosiveness Negligible Corrosive to Iron and Aluminum

Negligible Corrosive to Iron and Stainless Steel

Corrosive to Iron, Copper, and Brass

Corrosive to Iron

Toxicity Negligible Harmful to Tissues

Can Cause Skin Irritation

Variable, Iodine is Extremely Toxic

Can Cause Skin Irritation

Skin and Mucous Membrane Irritation

Biodegradability High Moderate to Low Moderate to High Low Low High

Cost Low to Moderate Low Moderate to High Moderate to High Moderate to High High

BioVex® Mixing Instructions (please read and follow all package directions)

One GallonAdd one (1) packet of activator (Green “G”) to one (1) 3.25 oz. package of BioVex® liquid concentrate chemistry. Replace cap securely. Shake vigorously and invert bottle multiple times. Add to one (1) gallon container and fill with water. The product is now ready to use.

Five GallonsAdd one (1) packet of activator (Blue “T”) to one (1) 16 oz. package of BioVex® liquid concentrate chemistry. Replace cap securely. Shake vigorously and invert bottle multiple times. Add to one (5) gallon container and fill with water. The product is now ready to use.

BioVex

G3.25 oz

BioVex

GActivator

BioVex

G3.25 oz

BioVexGActivator

BioVex

G3.25 oz

1Gallon

BioVex

G3.25 oz

BioVex

T16 oz

BioVex

TActivator

BioVex

T16 oz

BioVex

T16 oz

BioVexTActivator

5Gallon

BioVex

T16 oz

BIO-CIDE INTERNATIONAL • 2650 Venture Drive, Norman, OK 73069 • 405.329.5556 • 405.329.2681 fax • 800.323.1398 • www.bio-cide.com

HVS WALL MOUNT HVS