Product Brochure

WiMAXTest & Measurement SolutionsWiMAXTest & Measurement Solutions

Solutions Catalog

2

Anritsu Solutions for WiMAX Ubiquitous NetworksWiMAX is a next-generation wireless technology based on the IEEE802.16 standard, supporting faster, larger-capacity, broadband networks. In particular, Mobile WiMAX has faster data speeds than mobile phones, covers a broader area than wireless LAN, and supports communications at several Mbps even while moving at high speed in cars, trains, etc. These advantages are driving progress towards real-world WiMAX testing in Japan and around the world.Anritsu provides test solutions supporting R&D, manufacturing, and maintenance of WiMaX UE, BS, and devices.

WiMAX Products Lineup

3

MG3700AVector Signal Generator

This GUI-driven PC application software is used to set parameters and generate waveform patterns based on the IEEE802.16e-2005 WirelessMAN-OFDMA MAC/PHY standard.Generated waveform pattern files are downloaded to the MG3700A and used to output WirelessMAN OFDMA modulation baseband signals and RF signals. Some parameters of the DL/UL-MAP and DCD/UCD, etc., MAC management messages can be set. The generated waveform pattern can be used for part* of the IEEE802.16e tests (8.4.13 Receiver Requirement).*: Excludes function tests (Handover, etc.) not done using only signal

generator.

[MX370105A Features]• Set MIMO/STC (Matrix A/B) of Ranging at Wave2• Set both Downlink and Uplink frames.• Set Zone (8 max.), Burst (16 max./Zone), and MACPDU

(32 max./Burst).• Easy Zone/Burst expansion/reduction using mouse at

Segment Edit screen. • MAC data, such as DLFP, DL-MAP, and UL-MAP, for

setting physical layer selected automatically or by user file.

• Data type for MAC PDU, etc., selected from 16_ bit repeat, PN9fix, PN15fix, S_QPSK, S_16QAM, S_64QAM, and User_File.

• FFT size selected from 128, 512,1024, 2048. • Bandwidth selected from 1.25, 1.50, 1.75, 2.50, 3.00, 3.50,

5.00, 6.00, 7.00, 8.75, 10.00, 12.00, 14.00, 15.00, 17.50, 20.00, 24.00, and 28.00 MHz.

• Frame length selected from 2.0, 2.5, 4.0, 5.0, 8.0, 10.0, 12.5, 20.0, and Continuous.

[MG3700A Features]• Waveform combine function:

Outputs wanted signal + interference signal using single all-in-one unit

• BER Measuring instrument option (MG3700A-031): Supports BER measurement using IEEE802-16-compliant fixed patterns (S_QPSK, S-16QAM, S-64QAM)

• Mobile WiMAX IQproducer Main Screen

This tree displays PHY/MAC parameters.The following items can be added and deleted:DCD, UCD, Downlink, Uplink, Preamble, FCH, MAC Message, Zone, Burst, MAC PDU, DL-MAP, UL-MAP

The set error, etc., is displayed.

Parameters including the physical layers and filters, are set here.

Parameters for items selected in the tree on the left and at the Segment Edit screen are set here.

• Segment Edit Screen

Feature Reference AnritsuMain Item Sub item (802.16 specification) MG3700A PUSC 8.4.6.1.2.1 YDL subcarrier PUSC w/ all subchannels 8.4.6.1.2.1 Yallocation FUSC 8.4.6.1.2.2 Y AMC 2 x 3 8.4.6.3 YUL subcarrier PUSC 8.4.6.2.1 Yallocation AMC 2 x 3 8.4.6.3 Y Initial 8.4.7.1 YRanging & BW HO 8.4.7.1 Yrequest Periodic 8.4.7.2 Y BW request 8.4.7.2 YFast-feedback 6-bit 8.4.5.4.10.5 Y Repetition 8.4.9 Y Randomization 8.4.9.1 YChannel CC 8.4.9.2.1 Ycoding CTC 8.4.9.2.3 (excluding 8.4.9.2.3.5) Y

Interleaving 8.4.9.3 Y DL QPSK/16QAM/64QAM 8.4.9.4.2 Y UL QPSK/16QAM/64QAM 8.4.9.4.2 YModulation Pilot modulation 8.4.9.4.3 Y Preamble modulation 8.4.9.4.3.1 Y Ranging modulation 8.4.7.3 Y Normal MAP 6.3.2.3.2 and 6.3.2.3.4 YMAP Support Compressed MAP 8.4.5.6 Y Sub-DL-UL MAP 6.3.2.3.60 Y Antenna, matrix A for DL PUSC 8.4.8.1.2.1.1 YMIMO 2-antenna, matrix B vertical encoding for DL 8.4.8.1.4 Y

MS2690A/MS2691ASignal Analyzer

Measurement FunctionsDownlink:ConstellationFrequency Offset, EVM, CINRPower Spectrum vs Sub-carrierPower vs TimeI/Q Data vs Sub-carrierMap InformationError Vector vs Sub-carrierError Vector vs SymbolSpectral Flatness

Uplink:ConstellationFrequency Offset, EVMPower Spectrum vs Sub-carrierPower vs Time

Measurement PerformanceResidual Vector Error: <0.6% (rms)Spectrum Flatness Accuracy: ±0.3 dBAmplitude Measurement Accuracy: ±0.6 dB

4

Mobile WiMAX signal can be analyzed by installing the MX269010A Mobile WiMAX Measurement Software in the MS2690A/MS2691A Signal Analyzer.Especially, downlink signal analysis can be automated because allocation settings are read from DL-MAP. Complicated parameter setting can be half-automated, supports one-button-measurement at R&D, warranty, validation and manufacturing.In addition, installing the optional vector signal generator (MS2690A/91A-020) supports both Tx and Rx measurements with one unit. MS2690A/91A-020 waveform patterns can be generated using Mobile WiMAX IQproducer (MX269905A), providing the same performance as the MX370105A (IQproducer for MG3700A).

Spectrum Flatness Error Vector vs Symbol

DL MAP Information IQ Data vs Time

Easy One-Touch Analysis

5

MS2781B 'Signature'High Performance Signal Analyzer

The MS2780/41 WiMAX Modulation Analysis option performs WiBro-compliant IEEE802.16d/e (Fixed/Mobile WiMAX) signal analysis.In addition, waveform patterns can be easily created from settings files and transferred to the MG3700A Vector Signal Generator, eliminating complex parameter settings.In terms of basic functionality, it has world-class performance with an average noise level of –167 dBm (no preamp) and a residual EVM of <–46 dB (10 MHz bandwidth, 1024 FFT size, 64 QAM), making it the ideal signal-analyzer solution for R&D applications.

CCDF

[Features]• Link Type: Uplink, Downlink• Duplexing Mode: TDD, FDD (Burst transmission required

on both Uplink and Downlink)• Max. Capture Duration:

200 ms to 1.28 s, depending on bandwidth• Bandwidths: All WiMAX permissible values (1.25, 1.5,

1.75, 2.5, 3, 3.5, 5, 6, 7, 8.75, 10, 12, 14, 15, 17.5, 20, 24, and 28 MHz)

• Cyclic Prefix Values: 1/4, 1/2, 1/16, 1/32• Auto Cyclic Prefix detection: OFDMA: Yes, OFDM: No• FFT sizes: OFDMA: 128, 512, 1024, 2048, OFDM: 256• Modulation Formats: BPSK (pilots) QPSK, 16QAM,

64QAM [auto detection (OFDM only) or manual]• Preamble Detection

OFDM: Auto Detection OFDMA: Manually Set

EVM/RCE vs Frequency Frequency Tolerance

Feature Reference AnritsuMain Item Sub item (802.16 specification) MS2781B PUSC 8.4.6.1.2.1 YDL subcarrier PUSC w/ all subchannels 8.4.6.1.2.1 Yallocation FUSC 8.4.6.1.2.2 Y AMC 2 x 3 8.4.6.3 YUL subcarrier PUSC 8.4.6.2.1 Yallocation AMC 2 x 3 8.4.6.3 Y Repetition 8.4.9 YChannnel Randomization 8.4.9.1 Ycoding CC 8.4.9.2.1 Y Interleaving 8.4.9.3 YChannel Physical CINR using Preamble 6.3.8, 8.4.5.4.12, YQuality Physical CINR using Pilots 8.4.11.3 and 11.8.3.7.9 YMeasurement RSSI measument 8.4.11.2 and 6.3.2.3.50 Y DL QPSK/16QAM/64QAM 8.4.9.4.2 Y

Modulation UL QPSK/16QAM/64QAM 8.4.9.4.2 Y Pilot modulation 8.4.9.4.3 Y Preamble modulation 8.4.9.4.3.1 YMAP Support Normal MAP 6.3.2.3.2 and 6.3.2.3.4 Y

Spectrum Flatness

EVM/RCE vs Time

EVM, Constellation

6

MS2717B MT8222A 'BTS Master'Microwave Spectrum Analyzer Handheld Base Station Analyzer

MS2717B/MT8222A provides two WiMAX measurement options: Fixed WiMAX RF Measurements and Fixed WiMAX Demodulator.

Fixed WiMAX RF Measurements (Option 46)RF measurements are used to measure the transmitted signal strength and signal shape of the selected BTS transmitter. For the technician's convenience, the RF measurement option can display Channel Spectrum, Power vs Time, ACPR and RF Summary screens.

Fixed WiMAX Demodulator (Option 47)With Option 47, the MT8222A can demodulate Fixed WiMAX OFDM signals and displays detailed measurements for evaluating transmitter modulation performance using Constellation, Spectral Flatness, EVM vs Sub carrier, and EVM vs Symbol.

Fixed WiMAX RF Measurements (Option 46)

Constellation

Power vs TimeSpectrum ACPR

Fixed WiMAX Demodulator (Option 47)

EVM vs Sub-carrier

Modulation Summary

Spectrum Flatness

EVM vs Symbol

The EVM vs Symbol screen displays the EVM (rms) values vs OFDM symbols.

Use the Master Software tools to create and download Fixed WiMAX Pass/Fail tests.

Option 47 displays the constellation of the demodulator signal.

Spectral Flatness is displayed with the mask as specified in 802.16-2004.

The EVM vs Sub Carrier screen displays the pilot and data subcarrier.

The RF Spectrum screen shows the signal spectrum along with key parameters, such as channel power and occupied bandwidth.

The power vs Time screen displays the burst power and preamble power of the signal.

The ACPR screen shows the power levels for the main channel and two adjacent channels.

MT8222AMS2717B

7

Trademarks• IQproducer, Signature, BTS Master are a registered trademark of Anritsu Corporation.• Other companies, product names and service names are registered trademarks of their respective companies.

MA24106AUSB Power Sensor

The MA24106A power sensor is a USB power sensor that elimi-nates the need of a traditional power meter. It is a highly accurate, standalone instrument that communicates with a PC via USB. The power measurement capability of MA24106A is intended to mimic that of a traditional thermal (thermo-electric) power sensor with a wider dynamic range. Therefore, it is ideal for measuring average power of CW, modulated RF waveforms such as WiMAX, 3.5G, and multi-tone signals. In other words, it measures true RMS power regardless of the type of the input signal.

Frequency Range 50 MHz to 6 GHzDynamic Range –40 to +23 dBm

SWR <1.1 (50 MHz to <2 GHz) <1.2 (2 to 6 GHz) Sensor Linearity <3%RF Connector N (m)

• True RMS detection over a 63 dB dynamic range enables accurate CW and modulated power measurements

• Ready for use in a wide variety of applications, including installation and maintenance of base stations, testing of 3.5G and 4G products, cell phones and general purpose RF devices

• High damage power levels and ESD protection provides ruggedness and reliability

• Low current consumption (100 mA) preserves note PC battery life• Eliminating the need for a reference calibrator reduces test time

and handling in production• Light weight, economical and easy to use with a desktop or note PC• One year calibration cycle

Basic Power Meter functions available on screen

Advanced features are available in menus

Measurement setup status available on screen

Big display for easy readout

MA5612 SeriesDipole Antenna

The MA5612 series of 13 types of fixed-element length, half-wavelength dipole antennas covers the frequency range of 0.8 to 6 GHz.

Specifications

Model Element Support, Balun Support, Balun (dE) (dB) (L)MA5612A series ø2.5 mm ø6 mm 300 mmMA5612B series ø2 mm ø6 mm 300 mmMA5612C series ø1.5 mm ø5 mm 200 mm

Impedance 50 Ω (nominal)Connector SMA-JVSWR ≤2.0 (in specified frequency range)Gain 2 dBi (nominal)Mass ≤200 g (per antenna)Element Diameter 2.5 mmSupport/Balun Diameter ø6 mmSupport/Balun Length 300 mm MA5612A1: 800 to 880 MHz MA5612A2: 880 to 960 MHz MA5612A3: 1.4 to 1.55 GHz MA5612B1: 1.55 to 1.7 GHz MA5612B2: 1.7 to 1.95 GHz MA5612B3: 1.95 to 2.25 GHz Frequency Range MA5612B4: 2.25 to 2.6 GHz MA5612B5: 2.6 to 3 GHz MA5612C1: 3 to 3.5 GHz MA5612C2: 3.5 to 4 GHz MA5612C3: 4 to 4.6 GHz MA5612C4: 4.6 to 5.3 GHz MA5612C5: 5.3 to 6 GHz

Dimensions

Element

Spacer Indicate Support, Balun

λ/2

appr

ox.

SMA-J connector

dE

dB

L

Product Brochure

WiMAXTest & Measurement Solutions

Anritsu Corporation 5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 JapanPhone: +81-46-223-1111Fax: +81-46-296-1264

• U.S.A.Anritsu Company1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brazil Anritsu Eletrônica Ltda.Praca Amadeu Amaral, 27 - 1 Andar01327-010-Paraiso-São Paulo-BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

• U.K.Anritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200 Fax: +44-1582-731303

• FranceAnritsu S.A.9 Avenue du Québec, Z.A. de Courtabœuf 91951 Les Ulis Cedex, France Phone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

• ItalyAnritsu S.p.A.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711 Fax: +39-6-502-2425

• SwedenAnritsu ABBorgafjordsgatan 13, 164 40 KISTA, SwedenPhone: +46-8-534-707-00 Fax: +46-8-534-707-30

• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

• DenmarkAnritsu A/SKirkebjerg Allé 90, DK-2605 Brøndby, DenmarkPhone: +45-72112200Fax: +45-72112210

• SpainAnritsu EMEA Ltd. Oficina de Representación en EspañaEdificio VeganovaAvda de la Vega, n˚ 1 (edf 8, pl 1, of 8)28108 ALCOBENDAS - Madrid, SpainPhone: +34-914905761Fax: +34-914905762

• United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

• SingaporeAnritsu Pte. Ltd.60 Alexandra Terrace, #02-08, The Comtech (Lobby A)Singapore 118502Phone: +65-6282-2400Fax: +65-6282-2533

• IndiaAnritsu Pte. Ltd. India Branch OfficeUnit No. S-3, Second Floor, Esteem Red Cross Bhavan, No. 26, Race Course Road, Bangalore 560 001, IndiaPhone: +91-80-32944707Fax: +91-80-22356648

• P.R. China (Hong Kong)Anritsu Company Ltd.Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza, No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong KongPhone: +852-2301-4980Fax: +852-2301-3545

• P.R. China (Beijing)Anritsu Company Ltd.Beijing Representative OfficeRoom 1515, Beijing Fortune Building, No. 5, Dong-San-Huan Bei Road, Chao-Yang District, Beijing 10004, P.R. ChinaPhone: +86-10-6590-9230Fax: +86-10-6590-9235

• KoreaAnritsu Corporation, Ltd.8F Hyunjuk Building, 832-41, Yeoksam Dong, Kangnam-ku, Seoul, 135-080, KoreaPhone: +82-2-553-6603Fax: +82-2-553-6604

• AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill, Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

Catalog No. WiMAX-E-A-1-(1.00) Printed in Japan 2007-7 ddc/CDT

Please Contact:

070605

Printed on 70% �Recycled Paper