Product Brief 2SP0115T

PRODUCT DESCRIPTIONThe 2SP0115T is a dual-channel driver withan electrical interface. The driver is basedon CONCEPT’s SCALE-2® chipset, a highly integrated technology for the reliable drivingand safe operation of IGBTs.

Perfectly matched driver versions are availa-ble for all 17mm dual IGBT modules. Theplug-and-play capability of the driver allowsimmediate operation after mounting. Theuser needs invest no effort in designing oradjusting it to a specific application.

2SP0115T is the ultimate low-cost ultra-compact driver platform for EconoDUALTM

IGBT modules. As a member of the CONCEPTplug-and-play driver family, it satisfies therequirements for optimized electrical perfor-mance and noise immunity.

The highly integrated SCALE-2® chipset reduces the component count by 80% com-pared to conventional solutions, thus signifi-cantly increasing reliability and reducingcosts.

Thanks to SCALE-2® technology, the2SP0115T family comprises complete andextremely compact two-channel IGBT driversequipped with DC/DC converters, short-

circuit protection, advanced active clamping and supply-voltage monitoring.

Perfectly matched driver versions are available for all 17mm dual IGBT modules.Users need only solder them onto the corresponding IGBT module. The plug-and-play capability of the driver allows immediate operation with no further development ormatching effort. Shortest design cycles areachieved without compromising overall system efficiency in any way.

The embedded paralleling capability allowseasy inverter design covering higher powerratings. Specifically adapted drivers are available for all module types. The DIC20electrical interface is very simple and easyto use.

APPLICATIONS- Wind-power converters- Industrial drives- Railways auxiliary systems- Induction heating- Elevators- UPS and SMPS- Medical (MRT, CT, X-Ray)- Laser technology

KEY BENEFITCompact driver solution for 17mm dual IGBT modules with an electrical interface for 2-level, 3-level and multilevel converter topologies with paralleling capability.

KEY FEATURES- Very short delay time of <100ns- Small jitter of ±4ns- +15V (regulated)/-8V gate driving- Separate gate current paths (on/off)- Suitable for IGBTs up to 1700V- Interface for 3.3V...15V logic level- Direct and half-bridge modes- Embedded paralleling capability- 2-level and multilevel topologies- IGBT short-circuit protection- Advanced active clamping- Isolated DC/DC converter- 2 x 1W output power- Supply under-voltage lockout- Safe isolation to EN50178- UL compliant- Superior EMC- Reliable, long service life

SCALE-2® Plug-and-Play IGBT-Driver

2SP0115T - Dual-Channel Driver with electrical interface for 17mm EconoDUALTM IGBT Modules

1/2 Product Brief 2SP0115T – © 2013 CT-Concept Technologie AG

KEY DATA OVERVIEW

www.IGBT-Driver.com

Parameter Min Typical Max UnitNominal supply voltage 15 VSupply current @ fIN=0Hz 33 mASupply current, full load 220 mAOutput power per channel 1 WGate voltage +15/-8 VPeak output current (gate current) -8 +15 ASwitching frequency fIN 1) 0 50 kHzDuty cycle 0 100 %Turn-on delay 75 nsTurn-off delay 65 nsCreepage distance primary-secondary 12.6 mmCreepage secondary-secondary 6.6 mmClearance distance primary-secondary 12.3 mmClearance distance secondary-secondary 6.6 mmDielectric test voltage (600V/1200V versions) 3800 VAC

Dielectric test voltage (1700V versions) 5000 VAC

Partial discharge extinction voltage (600/1200V versions) 1200 Vpeak

Partial discharge extinction voltage (1700V versions) 1700 Vpeak

dv/dt immunity, input to output 50 kV/usOperating temperature 2SP0115T2Ax-xx -20 +85 °COperating temperature 2SP0115T2Bx-xx -40 +85 °C

1) Maximum switching frequency depends on the IGBT gate charge.See data sheet for actual value of specific driver.

Driving Parallel-Connected IGBTsThe driver allows direct parallel connection ofany number of 17mm modules with individualdrivers. This new pioneering concept for simpleand reliable parallel connection makes it practicalfor the first time to set up converter series withdiscrete modules as well as parallel-connectedIGBTs without any additional development effort.

Electrical Interface DIC20The 2SP0115T driver series is equipped withDIC20 electrical interface, fully compatible to PrimePACKTM driver series 2SP0320T. The DIC20electrical interface is very simple and easy touse.The driver has the following terminals:- Power supply and GND terminals- 2x drive signal inputs- 2x status outputs (failure returns)- 1x mode selection (half-bridge mode/direct mode)- 1x input to set the blocking timeAll inputs are ESD-protected and all digital inputshave Schmitt-trigger characteristics.

www.IGBT-Driver.com2/2 Product Brief 2SP0115T – © 2013 CT-Concept Technologie AG

ORDERING INFORMATION 2SP0115T DUAL-CHANNEL SCALE-2 PLUG-AND-PLAY DRIVER

Type Designation Description

2SP0115T 2SP0115T2A0 Standard version (-20°C…85°C)2SP0115T2B0 Extended operating temperature (-40°C…85°C)

2SP0115T2Ax-xx or2SP0115T2Bx-xx

xx: voltage basic type (for any module type)1)

600V=06 / 1200V=12 / 1700V=17

xx: specific module type (Infineon, Fuji, Mitsubishi, Starpower, Powerex)such as 2MBI300VN-120-50

1) Gate resistors have to be soldered by customer

The driver contains all necessary components for op-timal and safe driving of the relevant IGBT module:smallest gate resistors in order to minimize switchinglosses, gate clamping, active-clamping diodes (over-voltage protection at turn-off), Vce monitoring (short-circuit protection) as well as the input electricalconnector X1. Moreover, it includes components forsetting the turn-off trip level, the response time andthe dead time between both channels in half-bridgemode. Its plug-and-play capability means that it isready to operate immediately after mounting. Theuser needs to invest no effort in designing or adjustingthe driver to a specific application.

Dz

Rg,on

Turn-on DriverQ2

VceMonitoring

+15V

Electrical

Interface X1

Turn-off Driver

Rg,off

AdvancedActive Clamping

Dz

Rg,on

Turn-on DriverQ1

+15V

Turn-off Driver

Rg,off

AdvancedActive Clamping

Channel 1

Channel 2

VceMonitoring

Interface X2 NTC

BASIC SCHEMATIC OF THE 2SP0115T

2SP0

115T

CT-Concept Technologie AG2504 Biel | SwitzerlandPhone +41 32 344 47 47E-mail Sales@IGBT-Driver.com

Naples | FL USA 34101-9799+1 239 249 9254Sales.USA@IGBT-Driver.com

59469 Ense | Germany+49 2938 643 9990Sales.Ense@IGBT-Driver.com

518054 Shenzhen | China +86 755 8663 6456Sales.China@IGBT-Driver.com

Bangalore | India 560037+91 9990 455 666Sales.India@IGBT-Driver.com