produc t guide - gonneville inc....is the “sandless” way to ballast channelizer drums. the...

P R O D U C T G U I D E

9 4 9 . 3 6 1 . 5 6 6 3

TA

BL

E

OF

C

ON

TE

NT

S

Table of ContentsTrafFix Channelizer Products 1TrafFix Channelizer Drum™ 2-5TrafFix PVC Cones 6TrafFix Grabber-Cones® 7-8TrafFix Grabber-Tubes® 9TrafFix Looper-Cones® 10TrafFix Looper-Tubes® 11TrafFix History 12TrafFix Barricade Products 13TrafFix I-Beam Barricade Rails 14TrafFix A-Cades™ 15Metro-A- Cade 16Phoenix Type III Barricades 17TrafFix Type III Barricades 18TrafFix Metal Leg & Plastic Panel Barricades 19High Impact All Plastic Folding Barricade 20-21TrafFix Premier Vertical Panel™ 22TrafFix Step-n-Lock® Vertical Panel Barricades 23TrafFix Signs, Stands and Accessories 24Roll-Up Construction Signs 25-26Material Options and Standard Legends 27Custom Roll-Up Signs and Overlays 28Roll-Up Sign Accessories 29-30TrafFix Safe Sign™-350 Sign Blanks 31Zephyr® Portable Sign Stand 32TrafFix® Stands 33-34Quad-Drop™ Sign Stand 35Phoenix™ Sign Stand 36TrafFix Tri-Buster® Tripod Sign Stand 37TrafFix Little Buster® Sign Stand 38-39Econo Buster® Sign Stand 40Aluminum Buster™ Sign Stand 41TrafFix Big Buster® Sign Stand 42TrafFix Super Buster® Sign Stand 43TrafFix® Barrier Buster Concrete Barrier Clamp 44Portable Sign Stand Accessories 45Sign Stand Buyers Guide 46TrafFix Miscellaneous Products 47TrafFix® Spring Cone & Tote System 48TrafFix Stop/Slow Paddles & Flags 49TurboFlare AA LED Flares 50TrafFix Barricade and Warning Lights 51

TrafFix Weed Mat® 52TrafFix Safety Vests 53TrafFix Metro-Wall™ 54TrafFix Water-Wall™ 55Sentry™ Water-Cable Barrier Wall 56TrafFix Alert™ Rumble Strip 57

TrafFix Channelizer Products

™ ® ®

® ® ® Cones ® Spring Cones™

2 9 4 9 . 3 6 1 . 5 6 6 3

TrafFix Channelizer Drum™Available in rugged, durable high density polyethylene,or impact resistant, reshapeable low density polyethylene.

–Drum is a minimum of 18’’ widethroughout its 36’’ height,regardless of orientation

–Tapered design allows stackingwith or without barricade lightsfor easy handling and storage

–Drum and base remain“snapped together” untilimpacted or separated fortransportation and storage

–Gentle curves throughout drumeliminate sharp edges orcorners that crack and breakwhen impacted

–Built-in carrying anddragging handle

–Two mounting holes foroptional barricade lights

–Bright orange color moldedthroughout drum – UV inhibitorsminimize fading

–NTPEP tested–meets or

added strength during impact

–“D” shaped designminimizes rolling afterimpact and separationfrom base

CH

AN

NE

LI

ZE

R

DR

UM

S

–Dthre

–Twfo

–D“simtra

–Gelcow

–Bdr

–Top

–Bthm

–N

ad

–“mimfro

100% recycled rubber base for increased durability and “gription”which resists movement from passing vehicles

18000 SERIES

# 18044-LD-HIP-40

w w w . t r a f f i x d e v i c e s . c o m

TrafFix Channelizer Drum BasesTired of drum tops and bases that don’t fit, snap, or stay together?We have the solution. TrafFix Devices offers the largest selection of channelizer drum bases in the industry. Choose from an array of different types and styles that best fit your needs and budget. And remember, whichever base you select, it will fit any TrafFix channelizer drum top, even the ones you may have purchased years ago.

d e v i c e ss cc. c o moo mo m

CH

AN

NE

LI

ZE

R

DR

UM

S

Standard Base (requires sand bag)

TrafFix 100% recycled rubber base is the “sandless” way to ballast channelizer drums. The rubber base “grips the road” and minimizes drum movement due to wind gusts. Rubber bases come in 40 and 25 pound weights with two convenient carrying methods.

Economical and easy to use - simply place the base on the ground, add a sand bag and snap - lock the drum top to the base. Made of durable, impact resistant polyethylene.

25 standard bases nest for shipmentand storage

San-Fil base Automobile running overa San-Fil base

Recycled rubber baseWorker using center carrying

hole with 40-lb. base

San-Fil bases are designed to hold approximately 50 pounds of sand. The twist lock cover keeps the sand inside the base. Two carrying handles make movement and placement an

easily clears vehicle undercarriages and can even support the weight of

All TrafFix Bases are Interchangeable with All TrafFix Drum Tops

#18003-A

#18005-SFB

# 18025-RUB (25 lb.)# 18040-RUB (40 lb.)

All TrafFix Bases are Interchangeable with All TrafFix Drum Tops

3

4 9 4 9 . 3 6 1 . 5 6 6 3

Drum Tops with Tire Rings

The TrafFix Devices Tire Ring Base is made from truck tire sidewall sections. It’s economical and easy to use and provides all the ballast you’ll need to hold a drum in place, even in the windiest conditions. The tire ring eliminates the need for sandbags that tear or break leaving messy sand on the roadway. The rubber tire ring “grips the road” and minimizes drum movement and rotation.

Each TrafFix Devices patented drum hastwo molded-in, Anti-Rotation Ribs to hold a tire ring securely in place.

TrafFix channelizer drums (with tirerings) have been impact tested under thedirection of NTPEP, the national testing organization. The TrafFix drum top successfully separated from the base when repeatedly impacted by the test vehicle in both warm and cold weather tests.*

Remember, by using truck tire sidewallsfor channelizer drum ballast, we are reusingtruck tires and helping to keep them

*Test and evaluation results are availablefrom AASHTO’s (American Association of

national transportation product evaluation

tested and evaluated by NTPEP as described

devices. NTPEP is supported by the52 AASHTO member departments.

CH

AN

NE

LI

ZE

R

DR

UM

S

Note: All channelizer drum tops illustrated throughout this brochure can be ballasted with tire rings. Tire size should be 22.5’’(nominal diameter).

Simply drop one or two 22.5’’ diameter tire rings overany TrafFix Drum Top and you’re ready to begin yourconstruction project.

# 18044-HD-EG-TR

5w w w . t r a f f i x d e v i c e s . c o m

Why Buy from T.D.I.?

CH

AN

NE

LI

ZE

R

DR

UM

S

Since 1987, TrafFix Devices, Inc. has been providing their customers with the most value for their channelizer drum dollars. The drum tops and bases we made in 1987 are still interchangeable with ones we are currently producing.

At TrafFix Devices, we use only thehighest grade plastic resins to manufacture our drums. Our drum tops and bases are designed to“break-away” rather than “break-apart” upon impact.

Did you know that over 50% of the cost of a drum top is in the high performance reflective stripes?

Here is a TrafFix Devices drum top that has been impacted and appears crushed and un-usable. Notice that it is not torn or broken but

-facturers’ products, this top would be added to the “drum graveyard” pictured above.

TrafFix Devices uses only top quality plastic resins and has engineered it’s drums to be reshaped after most impacts. By applying simple hand pressure to the dented areas, most drums can be reshaped into their original form and reused.

This previously crushed drum has been snap-locked to its base and is ready to be put back on the job. Remember, every channelizer drum that you can salvage and reuse saves you money

TrafFix drum tops and bases are manu-factured to snap-lock around the entire perimeter of the drum. TrafFix unique “lip design” of each drum top and base insures positive locking.

TrafFix channelizer drum tops and bases are designed to stay locked together when dragged or moved around construction sites. The top piece easily separates when impacted by a vehicle or can be easily taken apart for storage.

25 lb. base made of 100% recycled rubber. Ideal for city or lower speed applications.

Replacement Drum Lip Kit for worn edge of drum. Comes complete with plastic section and hardware.

# 18025-RUB

TrafFix Channelizer Drum Tops and Bases

# 18011

6 9 4 9 . 3 6 1 . 5 6 6 3

PV

C

CO

NE

S

TrafFix PVC ConesPVC Traffic Cone MUTCD Compliant

performance.

and 36” -10 lb. or -12 lb.

nighttime performance.

fade resistance.

# 15036-HIWB-C10

Cone Bar

# 15028-HIWB-C7# 15018-HIWB-C3

# 15046A-CBYB

15000 SERIES


GR

AB

BE

R-

CO

NE

S

Rubber Bases The composite construction offers strength and durability. Bases are made from 100%

16 or 30 lbs.)

42000 SERIES

TrafFix Grabber-Cones®Grabber-Cones come in 28’’and 42’’ heights and are ballasted by 10, 16 or 30 lb. bases. Simply drop the recycled rubber base over the cone stem and you’re ready to go to work.

28’’ Grabber-Cones with caution tape provide an ideal way to protect hazardous off-road areas

and optional plastic barricade panels

Stackable -

sign, The Grabber-Cone can support the weight of stacked cones and bases without permanent distortion. Its low density polyethylene material and handle design prevents the cones from sticking together when stacked. The Grabber-Cone can be stacked with or without bases.

Flange Design

bottom supports the coneswhile in use or when stackedwith the rubber base.

42’’ Grabber-Cone with recycled rubber base

28’’ Grabber-Cone with recycled rubber base

Alternate stacking method

recycled rubber base.

with 4” bands

Easy grip handles

R bb B

# 42164-CRU-16HIP

# 28164-CRU-10HIP

# 42244-CRU-16HIP

# 42266-CRU-16HIP

Stacking rings for storage and transport

8 9 4 9 . 3 6 1 . 5 6 6 3

GR

AB

BE

R-

CO

NE

S

42000 SERIES

TrafFix Grabber-Cone™ Features

hazards and construction work areas42’’ Grabber-Cone as a linkable barricade withinterchangeable signs

The Grabber truck kit is a handy assortment of linkable plastic barricade panels and 42’’

42’’ Grabber-Cone with caution tape wrapped around handle

42” Grabber-Cone with stop signand warning light

42’’ Grabber-Cone withdirectional arrow sign

movement and prevents cones from sticking

barricade panel (42’’ Grabber-Cone only)

or resurfacing

Rubber Bases The composite construction offers strength and durability. Bases are made from 100%

16 or 30 lbs.)

#42001-GTK

Easy grip handles



GR

AB

BE

R-

TU

BE

S

42000 SERIES

innovative handle design allows you to easily drag or lift the Grabber-Tube.

Grabber-Tube

with UV inhibitors to minimize fading.

The recessed areas on the stem protect

minimizing rips and scratches.

the bottom of the stem allows the rubber base to

Rubber BaseThese 12 lb. and 18 lb. bases are made from 100% recycled rubber.

# 42133-TRU12HIP # 28133-TRU12HIP42’’ Grabber-Tube

# 42133-TRU18HIP

Grabber HandleConvenient handle design allows for easy movement and placement of Grabber-Tube.

TrafFix Grabber-Tubes®

Easy grip handles


10 9 4 9 . 3 6 1 . 5 6 6 3

LO

OP

ER

-C

ON

ES

46000 SERIES

TrafFix Looper-Cones®

StackableLooper-Cone with the patented reinforced

handle design can be stacked withoutsticking together – the durable low

density polyethylene plastic keeps thecones shape, reducing crushing

and breaking.

Rubber BasesLooper bases are made from 100% recycled

rubber in 10, 16 and 30 lb weights– with convenient carrying handles. Built-in stacking rings

keep bases together for storage and transport.

42” Looper-Cone with one 6” and one

(Shown with Clip on Sign)# 46164-CRU-16HIP

42” Looper-Cone with two 4” orange and two 4” white Diamond

30 lb base.# 46244-CRU-30DG

Looper-Cone with convenient handle design allows for easy movement and placement.

Looper-Cone will accept a standard or “D” cell barricade light.

The Looper-Cone is a 42’,’ all plastic cone and is ballasted by a 10, 16 or 30 lb. base. Simply drop the recycled rubber base over the cone stem and you’re ready to go to work.

Looper-Cones linked together with cone bars to restrict entry.


Easy grip handle

Cone Bar#15046A-CBYB


LO

OP

ER

-T

UB

ES

46000 SERIESTrafFix Looper-Tubes®

Closing off an area of the job site is quickand easy utilizing the unique “loop” stylehandle with two or more Looper-Tubestied together with

or rope.

# 42000-TB12

42” Looper-Tube with (2) 3”

42” Looper-Tube with clip-on sign

Rubber BasesLooper bases are made from 100% recycled rubber in 12 and 18 lb weights– with convenient carrying handles. Built-in stacking rings keep bases together for storage and transport.

Looper HandleLooper-Tubes unique “loop”style handle make grabbing andmoving a breeze

# 46133-TRU12HIP

42” Looper-Tube with(2) 3” bands of yellow

Looper-Tube is manufactured from durable low density polyethylene, with UV inhibitors added to minimize fading.

The recessed areas on the Looper stem help protect the reflective sheeting from tearing and scratching.

Extra large flange on the bottom of the Looper-Tubesecurely holds the base in place.

Over 20 years ago Jack Kulp and his wife Sue, co-founded TrafFix Devices Inc., headquartered in San Clemente, California. TrafFix Devices manufactures and distributes

transportation industry.

In 1987 when Jack & Sue started TrafFix Devices, out of their home, there were only a handful of products. Within a year they hired Walter Kuczera, to handle sales and marketing for the Eastern half of the country, which left

1989 Brent Kulp joined the family business taking over as Western Region Sales Manager, allowing Jack more time to develop new products and run the business side of the business.

TrafFix has since grown to 150 employees, dispersed

in San Clemente, California to manufacturing plants in

TrafFix Devices is now one of the largest producers of road safety products in the world — with most of TrafFix products continuing to be manufactured in the United States.

Products include plastic channelizer drums, portable sign stands and roll-up signs, plastic barricades, cones

attenuators to name a few. Every TrafFix product meets the Federal Highway National Cooperative Highway Research Project standard, NCHRP 350. By staying on the cutting edge of product innovation, TrafFix leads the industry by continuing to bring new and improved products to market.

TrafFix Devices products are sold to barricade rental

state departments of transportation, military and utility companies; as well as cities and counties all over the United States, Canada, China, Australia, New Zealand, Sweden, Europe, South Africa, Mexico and the Middle East. TrafFix has 6 Regional Sales Managers, a New Business Development Manager, and National Sales Manager all reporting to the VP of Sales and Marketing, who also manages International Sales.

a San Clemente business park. In 2003 Jack began work on creating a single building to house TrafFix Devices Inc. On April 1, 2008 his vision became a reality and TrafFix opened the doors to their new corporate headquarters on Avenida La Pata in San Clemente.

Moving all of the operations to one location has streamlined communications between departments,

development and has helped to speed up manufacturing and expedite the shipping process.

Jack, President & Founder, Sue, Corporate Secretary & Founder, Brent, VP Sales & Marketing, along with the rest of the TrafFix Devices Team, will continue with product innovations to keep TrafFix growing and evolving, in response to the needs of the transportation and safety industry well into the 21st Century.

TrafFix Devices Inc.

HISTORYTORYd expedite the shipping process.

Jack, President & Founder, Sue, Corporate Secretary & Founder, Brent, VP Sales & Marketing, along with the rest of the TrafFix Devices Team, will continue with product innovations to keep TrafFix growing and evolvini ti t k T fFi i d lresponse to the needs of the transportation andindustry well into the 21st Centu

TrafFix Barricade Products

™ & Metro A-Cade™

® ™

14 9 4 9 . 3 6 1 . 5 6 6 3

I-

BE

AM

B

AR

RI

CA

DE

R

AI

LS

TrafFix I-Beam Barricade Rails

44000 SERIES

barricade lights and clip-on plastic sign

Strength and Flexibility

yet durable all plastic TrafFix I-Beam Rail has been in use for over twenty years. It’s made of impact resistant polyethylene to withstand the rough treatment found in construction work zones.

Try this with a wood ormetal barricade panel

TrafFix I-Beam Rail combines

TrafFix I-Beam Rails weigh less than one pound per

easy to carry. Rails nestfor transportation. Nosharp edges or splinters.

TrafFix I-Beam Rail’s uniquedesign protects the expensive

scratches and abrasions.Rails nest for storage.


TR

AF

FI

X

A-

CA

DE

™

TrafFix A-Cades™Durable and Convenient

for storage and transportation, and can be used with the TrafFix I-Beam Rail, Phoenix PlasticRail, 1” x 8” or 2” x 8” nominal lumber. Accommodates standard or “D” cell barricade light.

TrafFix-Rails unique I-beam

in the A-Cade leg. There’s also a slot

or plastic rails of various lengths.

The Rail-Clip is ideal for mounting signs to TrafFix-Rails.

TrafFix A-Cades have built-instacking lugs for slip-free storage.

15

A-Cade Legs# 44000

16

ME

TR

O-

A-

CA

DE

9 4 9 . 3 6 1 . 5 6 6 3

Type II Metro-A-Cade with Phoenix Rails

Metro-A- Cade with Phoenix Plastic Rails™

44040 SERIES or 2” x 8” nominal lumber


PH

OE

NI

X

TY

PE

I

II

B

AR

RI

CA

DE

S

53000 SERIES

Phoenix Type III Barricades

barricade lights or (2) small LED-B lights

and steel bases

uprights

4’, 6’, 8’, 10’ and 12’ lengths

uprights from base

and breakdown

storage and transport

17

18 9 4 9 . 3 6 1 . 5 6 6 3

TY

PE

I

II

B

AR

RI

CA

DE

S

TrafFix Type III Barricades

Complete Type III Barricade can be assembled and disassembled in a matter of minutes by one person.

Breakaway Base yields to impacting vehicles.

A Tie-Bar is usedfor added supportand rigidity.

56000 SERIES

Economy Type III Barricade with Phoenix plastic rails, provides low cost Type III solution with rolled steel uprights and feet. Choose the Phoenix Rails in lengths of 4’, 6’, 8’, 10’ and 12’.

52000 SERIES

TrafFix Breakaway Type III Barricade utilizes the all-plastic Phoenix Rail and uses uni-strut Telespar tubing with breakaway base, bracket and detachable feet.

TY

PE

II

IB

AR

RI

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCA

D

Complete Type III Barricade can be assembled and


ME

TA

L

LE

G

BA

RR

IC

AD

ES

TrafFix Metal Leg & Plastic PanelBarricades

i x d e v i c e s . c o m

35000 SERIESThe 35000 Series barricades, feature metal legs with High Impact (blow molded) panels.

Now you can combine the strength of impactresistant plastic panels with traditional metal legs. These barricade components come together to form a more durable folding barricade.

“D” cell barricade lights

reduce bending or warping

Top Panel: 8” x 24” or 12” x 24” Bottom Panel: 6” x 24” or 8” x 24” Leg Thickness: 14 gauge

Type II Barricadewith 8” x 24” top and bottom panels.

Type I Barricade with

# 35212-EG14

# 35408-EG14

20 9 4 9 . 3 6 1 . 5 6 6 3

PL

AS

TI

C

FO

LD

IN

G

BA

RR

IC

AD

ES

High Impact All Plastic Folding Barricade

36000 37000 SERIES

TrafFix Devices offers two series of folding plastic barricades using durable blow molded plastic legs. The 36000 Series barricades feature Economy (injection molded) panels while the 37000 Series uses High Impact (blow molded) panels. Because the Plastic Folding Barricade is assembled with individual components, you can select any combination of top and bottom panels as listed below.

Type I Barricade with 8” x 24” top

You can also specify engineer, high performance, or diamond

The optional sandbag bar is available with all barricade combinations.

(Optional breakaway sand bag bar pictured above)

Type I Barricade with 8” x 24” top paneland 8” x 24” San-Fil bottom panel.

Type II Barricade with 8” x 24”top panel and bottom panel.

Top Panel Sizes: 8” x 24” or 12” x 24”Bottom Panel Sizes: 4” x 24”, 6” x 24”,8” x 24” or 8” x 24” San-Fil

”4”,

Yohig

Thavco

op panelpanel.

Type II Barricade with top panel and bottom

TRAFFIX PLASTIC FOLDINGBARRICADE FEATURES

resistant polyethylene

increased strength to minimize barricade damage and to prevent sagging in extreme heat

II barricades are available

replacement of components

eliminates messy sand bags and stabilizes barricade in windy conditions

mounted lights are stackable


PL

AS

TI

C

FO

LD

IN

G

BA

RR

IC

AD

ES

The Latest Innovation In Plastic BarricadesWith All-Modular Components

Molded-in male andfemale stacking lugs keep

place for shipping andstorage.

If you’re tired of wasting money by discarding bent metal legs, broken wood panels, or unrepairable plastic barricades, consider the TrafFix High Impact Modular Plastic Barricade. This barricade is constructed from impact resistant plastic, and all the components can be replaced should they become broken or damaged.

You can SAVE $$$ by repairing your barricades and also reduce

are 100% recyclable.

Combination metalhinge/bolt protector(bushing) and steelreinforcing washer

securely in place.

Combination metal hinge/

keeps barricade legs tightly locked together.

Anti-skid gripper teeth are molded-in to the bottom of each leg to help keep the

Optional San-Fil bottom panel holds up to

the plastic barricades without using messy sandbags. San-Fil panels can be imprinted

your name or logo.

TrafFix Premier Panel™

40000 SERIES

Premier Panel™ is an all plastic and rubber vertical panel barricade that is designed to take repeated impacts with little or no damage to the Premier Panel™ or to the impacting vehicle

Convenient handle design allows for easy movement and placement of the Premier Panel Premier Panel accepts

standard and “D” cell barricade lights

Premier Panel stacks for easy storage and transportation

Premier Panel comes with a variety of sheeting sizes and messages – and is available in orange or white plastic

Rubber Bases -available in 20 and 30 lb weights; made from100% recycled rubber with molded handles and built in stacking lugs

20 lb recycled rubber base# 40236-W-HIP20

Orange Premier Panel with 8” x 36”

30 lb recycled rubber base# 40236-O-HIP30

20 lb recycled rubber base# 40224-W-HIP20

Orange Premier Panel with 8” x 29” (270 sq inches) trapezoid

recycled rubber base# 40229-O-EG20-S

22 9 4 9 . 3 6 1 . 5 6 6 3

PR

EM

IE

R

PA

NE

L


ST

EP

-N

-L

OC

K®

VE

RT

IC

AL

PA

NE

L

TrafFix Step-n-Lock® Vertical Panel Barricades

Panel Barricade“Stop for Pedestrians”with 28 lb. recycledrubber base# 34236-LDG28SFP

Rubber BaseMade from 100% recycled rubber, the base incorporates two easy-grip carry-ing handles. A vulcanized rubber center section provides reinforcement from wear and tear due to panel separation. On the under side of the base, there are four raised anti-rotational foot pads to minimize movement from wind, or turbulence from passing vehicles.

TrafFix Step-n-Lock Vertical Panel Barricade consist of durable blow molded polyethylene panel and recycled rubber base.

To assemble, simply “Step-n-Lock” the vertical panel into the base. No heavy rings or bases that must be lifted over the top of the panel.

For transportation and storage, both the panels and bases can be easily separated and stacked.

Vertical Panel Barricadewith light and 43 lb.recycled rubber base33000 Series

8” x 24” TrafFixVertical Panel Barricadewith light and 43 lb.recycled rubber base34000 Series

TrafFix VerticalPanel Barricade with 28 lb. recycledrubber base. “State Law Yield toPedestrians WithinCrosswalk” meets MUTCD Standard# 33236-LDWH28SLY

Messages and LegendsA wide variety of messages and legends canbe printed on one or two sides of the panel.Engineer, high performance or diamond grade

lots, schools, churches, or in-plant applications.

Step-n-Lock PanelSix locking buttons are molded into thepanel and correspond to six matchingrecesses molded in the base. Simply stepdown on the foot hole to lock the panel inplace. The Step-n-Lock design ensures thepanel will remain vertically locked in place

and legends can be intermixed with either the 28 or 43 lb. base.

The panel separates from the base when impacted by a vehicle.

The panel face is recessed to minimize abrasions and scratches to the

can be replaced.

The bases are made from recycled rubber and weigh either 28 or 43 lbs.

Easy grip carrying handle

Light mounting holeand built-in ledge toeliminate light rotation

Step-n-Lock foothole allows easyyet secure assemblyof panel to base

Molded-inmale and femalestacking lugs

33000 34000 SERIES

TrafFix Signs, Stands and Accessories

Roll-Up Construction Signs

Large variety of standardsign legends-custom signlegends and overlays arealso available

Signs available in

Marathon or 3M Diamond Gradematerial

24000 SERIES

26000 SERIES

# 22019-EZU

Sewn fabric corner pockets

Plastic corner pockets


RO

LL

-U

P

CO

NS

TR

UC

TI

ON

S

IG

NS

25

# 26048-EFO-HF-MWS

with plastic corner pockets

# 24018-BRU Little Buster Sign Stand

26 9 4 9 . 3 6 1 . 5 6 6 3

RO

LL

-U

P S

IGN

AS

SE

MB

LY

OP

TIO

NS

Sign Assembly Options and Accessories

Pictured with TrafFix

Flag Bracket forboth wood or plastic

frame assemblyVelcro tie strap

Pictured with Roll-Up Sign Mounting Bracket – The Universal Sign Mounting Clamp and the

can also be utilized.

Sewn Corner PocketE-Z UPBracket and Flags

# 22019-EZU

TrafFix Stainless SteelBracket and Flags# 22018-FLG-36S# 22018-FLG-48S

EconomyBracket and Flags

# 26018-ALT

Plastic Corner Pocket

Roll-up Sign MountingBracket

# 24000-BRULittle Buster Sign Stand with

48”x 48” roll-up sign

Anti-kiting strap

Universal SignMounting Clamp

# 22034-SMC

3-n-1 SignMounting Clamp

# 24034-3N1


RO

LL

-UP

SIG

N M

AT

ER

IAL

S A

ND

LE

GE

ND

S

Material Options and Standard LegendsRoll-up Construction Signs come in a variety of different materials and legends. These signs utilize

performance, even in the windiest conditions.

Bright Orange

Mesh

Fluorescent Vinyl

Fluorescent Vinyl

Fluorescent Marathon or

Diamond GradeSign Material

Standard Construction Sign LegendsAvailable in Sizes 36”x 36” or 48”x 48”

Overlays for the word AHEAD

500 FT., 1,000 FT., 1,500 FT., 1/2 MILE , 1 MILEDIRECTIONAL ARROW, BLANK

Overlays for the words “RIGHT” OR “LEFT”

CENTER, LEFT, RIGHT, BLANK

2 Left Lanes Closed Ahead Low Shoulder2 Right Lanes Closed Ahead Men Working SymbolAccident Ahead Men Working WordsArrow - Added Lane Symbol - 45 degree Arrows Mowers AheadArrow - Added Lane Symbol - Vertical Arrows Mowing AheadArrow - Dbl Reverse Curve Left Narrow BridgeArrow - Dbl Reverse Curve Left (2 lanes) New Traffic Pattern AheadArrow - Dbl Reverse Curve Left (3 lanes) No Center LineArrow - Dbl Reverse Curve Right No ShoulderArrow - Dbl Reverse Curve Right (2 lanes) One Lane BridgeArrow - Dbl Reverse Curve Right (3 lanes) One Lane Road AheadArrow - Left Curve Arrow Pavement EndsArrow - Left Turn Arrow Prepare To StopArrow - Merging Traffic Symbol - 45 degree Arrow Ramp ClosedArrow - Merging Traffic Symbol - Vertical Arrows Ramp Closed AheadArrow - Reverse Curve Left Arrow Ramp NarrowsArrow - Reverse Curve Left Arrows (2 lanes) ** Reduced Speed Limit Ahead Symbol w/ArrowArrow - Reverse Curve Left Arrows (3 lanes) XX MPH Speed Zone Ahead (words)Arrow - Reverse Curve Right Arrow * Right Lane ClosedArrow - Reverse Curve Right Arrows (2 lanes) * Right Lane Closed AheadArrow - Reverse Curve Right Arrows (3 lanes) Right Lane Closed XXXXXArrow - Reverse Turn Left Arrow Right Lane EndsArrow - Reverse Turn Right Arrow Right Shoulder ClosedArrow - Right Curve Arrow Right Shoulder Closed XXXXXArrow - Right Turn Arrow * Road Closed AheadArrow - Two Way Traffic Arrows * Road Construction AheadBe Prepared To Stop Road Machinery AheadBlank w/Border Only Road May FloodBlasting Zone Ahead Road NarrowsBump * Road Work Ahead* Center Lane Closed Ahead Rough RoadCenter Lane Closed XXXXX Shoulder ClosedConstruction Ahead Shoulder Closed AheadCrew Working In Trees Shoulder Drop Off Symbol* Detour Ahead Shoulder EndsDip Shoulder WorkDUI Checkpoint Ahead Shoulder Work AheadEmergency Scene Ahead ** Signal Ahead Symbol w/Arrow (3-color traffic light)** End Road Work 48”x24” Signal Work Ahead** End Utility Work 48”x24” Single Lane AheadFallen Rocks SlowFire Scene Ahead Soft ShoulderFlagger (word) Steel Plate AheadFlagger Ahead Symbol w/Flag ** Stop Ahead Symbol w/Arrow (stop sign red)Flagger Ahead Symbol w/Paddle Street Closed AheadFlagger Ahead Words Street Work AheadFresh Oil Survey CrewGrooved Pavement Survey Crew AheadIncident Ahead ** Transition Symbol Left (Lane Ends)Lane Closed Transition Symbol Right (Lane Ends)Lane Ends Merge Left Transition Symbol w/Overlay (Lane Ends L & R)Lane Ends Merge Right Tree Work Ahead* Left Lane Closed Truck Crossing* Left Lane Closed Ahead Uneven LanesLeft Lane Closed XXXXX * Utility Work AheadLeft Lane Ends Work Area AheadLeft Shoulder Closed Workers AheadLeft Shoulder Closed XXXXX ** Yield Ahead Symbol w/Arrow (yield sign red)Loose Gravel

Standard Sign Overlay Legends

* Standard with Velcro around the word “RIGHT” and / or the word “AHEAD” for overlaying application.** See Price Book for Specialty Sign Pricing.

Due to the variety of sign styles, sizes & materials offered, “Standard Legend” inventory may vary by season & item.

27

28 9 4 9 . 3 6 1 . 5 6 6 3

CU

ST

OM

R

OL

L-

UP

S

IG

NS

Custom Roll-Up Signs and Overlays

sign with black lettering

vinyl signs

Arrow Sign with reversible Arrowhead overlay

sign with black lettering and V-frame.

TrafFix Devices manufacturing facility has the capability of fabricating a wide range of custom sign legends in a variety of sizes, materials and colors. For more information, or a price quote, contact our customer service department.

black lettering

Plastic Corner Pocket


RO

LL

-U

P

SI

GN

A

CC

ES

SO

RI

ES

Rib slips into plastic corner pocket effortlessly

Roll-Up Sign AccessoriesTrafFix Plastic Corner Pocket

it resists cracking or breaking.

Universal SignMounting ClampAllows TrafFix sign tobe mounted to roundor square posts, orrigid sign masts.# 22034-SMC

Roll-Up SignMounting BracketHolds any 30”, 36”or 48”roll-upsign and can be mounted onmost square rigid sign mast.

locks into roll-up sign mounting bracket.# 24000-BRU

3-n-1 Sign Mounting BracketThis unique bracket has (3) separateslots for mounting signs to most typesand sizes of posts or sign masts.

# 24034-3N1

Sewn Corner Pocket

29

30 9 4 9 . 3 6 1 . 5 6 6 3

RO

LL

-U

P

SI

GN

A

CC

ES

SO

RI

ES

Roll-Up Sign Accessories

TrafFix Flag Assembly

the sign for compact and convenient storage. Eliminates

securely in place.

Flags up for advance warning# 22018-FLG-36S# 22018-FLG-48S

Flags down for storage

Sign Storage BagA sturdy roll-up sign storage bagwith convenient carrying handle,helps to keep the sign clean andfree from dirt, grease and oil.

# 22036-SB# 22048-SB

E-Z UP Flag Assembly w/ Flags# 22019-EZU

Economy Flag Assembly w/ Flags

# 26018-ALT


RI

GI

D P

LA

ST

IC

SI

GN

BL

AN

KS

TrafFix Safe Sign-350 Sign Blanks

Safe Sign-350 is an alternative to heavy plywood and aluminum signs with their sharp edges and bent corners. The Safe Sign-350 is a specially corrugated plastic sign blank that is lightweight yet rigid. It’s tough enough to hold its shape both while stacked on the truck and on the construction site. This special plastic

colored orange throughout, and is available in 36”x 36”, 48”x 48”and 48”x 96” sizes. Safe Sign-350 is ideal for all types of rigid sign applications and has been NCHRP-350 approved for use with TrafFix Devices’ sign stands.

Pallet of 48”x48” Safe Sign-350 sign blanks ready for shipment

Cross section of Safe Sign-350 sign blank

27000 SERIESES

48”x48” Safe Sign-350 # 27044-NS

# 27033-NS

32 9 4 9 . 3 6 1 . 5 6 6 3

ZE

PH

YR

®

SI

GN

S

TA

ND

Zephyr® Portable Sign Stand26000 SERIESFor Use With 36” and 48” Roll-Up Signs

The Zephyr portable sign stand is constructed of a steel plate molded into a recycled rubber base (weight 38 lbs). Two molded-in carrying handles allow for easy movement and placement of the Zephyr stand.# 26000 w/ Standard Latch Bracket

The Zephyr sign stand is easy to use – simply release the lever and raise the mast to lock it into the upright position. No further adjustments are necessary. No

The plastic corner pocket at the bottom of the sign allows for quick and easy mounting of sign to stand. Just insert the corner pocket and press down. The sign automatically locks in place. To remove the sign, simply lift the release lever. The big rubber base (28”

remain in place, even in windy conditions. Zephyr “spills the wind” without the use of bulky springs.

little storage space in the truck (only 4” tall when folded). Stacking lugs are molded into the base for easy storage.The vertical mast folds down and locks in place to minimize damage during loading, transporting, and unloading the stand.


TR

AF

FI

X®

S

IG

N

ST

AN

DS

TrafFix® Portable Sign StandsFor Use With 36” and 48” Roll-Up Signs

22000 SERIES

Stand with Universal Sign Holder

22300 SERIES

TrafFix Sign Stand with Unique Step-N-Drop® LegsThis highly advanced Step-n-Drop feature enables you to quickly set-up the stand without having to bend over or stoop down. Simply place your foot on the release lever, step down and two legs will drop into position. Repeat the process for the remaining two legs and you are ready for the sign.

TrafFix Single Spring Sign StandFor those extra windy applications, TrafFix Devices offers the single spring sign stand. The stand has Step-n-Drop legs and all the other features and

connector for plastic corner pockets, or the Universal Sign Holder which is ideal for sewn corner pockets and other manufacturers roll-up signs.

stores in small areas. All parts can be easily replaced. A complete parts list is included with each stand.

# 22000

# 22000-WEX

# 22000-USH

# 22000

# 22300-USH

All steel construction with powder coated paint to resist rusting

22000 SERIES

Aluminum Leg TrafFix Single Spring Sign StandThis aluminum leg version of the TrafFix Sign Stand with Spring is ideal for those applications requiring lightweight portability with superior corrosion resistance. The telescoping legs provide stability in windy conditions.

The telescoping legs create a wider stance for added stability in high wind situations. Just pull legs out when needed, and return legs back to original position for storage.The stand can also be adjusted to 2 height levels, depending on your particular situation. Each leg can also be independently adjusted for greater stability on uneven terrain.

34 9 4 9 . 3 6 1 . 5 6 6 3

TR

AF

FI

X®

S

IG

N

ST

AN

DS 22700 SERIES

.

Ground Mount StandThis economical stand is ideal forshort duration jobs. Simply drivethe pointed metal end of the stand into the ground by stepping on the horizontal side bars. Holds

in place.

Rigid Sign AdapterThis single spring adapter converts a TrafFix stand forroll-up signs into a stand that will accommodate a36”x 36” rigid sign. Simply drop the custom latchbracket connector into the sign stand to lock in place.

The TrafFix Stand tip resistant design effectively spills the wind and holds a

without heavy springs or a bulky mastUniversal Sign Holder

allows any manufacturer’sroll-up sign to be used

with TrafFix Stand

The special TrafFix 10”extender adapts to the standfor added height, or where

maximum sign height isrequired without raising

the legs.

TrafFix Stand shown

# 22000-RSA

# 22000-GMS# 22700# 22700-USH

# 22012-USH


QU

AD

-D

RO

P™

S

IG

N

ST

AN

DS

Quad-Drop™ Sign Stand For Use With 36” and 48” Roll-Up Construction Signs

All four legs drop at once providing the quickest deployment of

lightweight portability and corrosion resistance. Minimize the time

of plastic corner pocket roll-up signs. Four telescoping aluminum

TrafFix Devices plastic corner pocket roll-up signs and the patented Slide-n-Store™ sign, also from TrafFix Devices. Patent Pending

54000 SERIES

# 54000

36 9 4 9 . 3 6 1 . 5 6 6 3

PH

OE

NI

X™

S

IG

N

ST

AN

D

TrafFix Phoenix™ Sign Stand

A simple and easy wayto mount signs that are different in size and shape to a single sign stand. The Phoenix Sign Stand is designed with a pre-drilled square upright to accommodate hole patterns found in most size signs. You can raise and lower signs anywhere along the six-foot

Phoenix Sign Stand is NCHRP-350 compliant, with a 48”x 48” .080 aluminum sign as well as, other size signs and with an optional

recycled rubber base with steel

Two Phoenix Sign Stands can also be used to support barricade panels to create a type III barricade.

90000 SERIES

Phoenix Sign Stand withtwo different size signs

Phoenix Sign Stand with48”x 48”.080 aluminum

also be used to support barricpanels to create a type III barric

and steel base plate on the ground and insert the square upright into the center opening and secure it with the steel locking pin.

can be replaced if damaged.

The Phoenix Sign Stand consists of four components

This top view of the recycled rubberbase and top of the steel base plate(visible in the center), illustrates howthey go together. Four stacking lugs arelocated in each corner of the base andhelp hold sand bags in place duringwindy conditions. Together the rubberbase and steel plate weigh 40 lbs.

This is the bottom view of the recycledrubber base with the steel base plate(visible in the center). Two molded in carrying handles are located on either side of the base.

Once the recycled rubber base and steel plate are assembled, they can virtually remain together until you decide to separate the two pieces. The stacking lugs allow the bases to nest together while taking up very little space on the truck or in storage.

# 90018


TR

I-

BU

ST

ER

®

SI

GN

S

TA

ND

TrafFix Tri-Buster® Sign StandThe Tri-Buster Tripod Sign Stand is the ideal

combination of durability, economy, safety, andversatility. Perfect for the needs of many contractors,

municipalities and utility companies.

duty steel galvanized tubing for long life at an

economical cost.

plywood, aluminum, aluminum poly laminate,

plastic, and roll-up sign materials.

conditions. Ballasting hook allows sand bags or

weights to be hung from sign stand for

added stability.

and Leg Extending Leveling Kit (93000-EXT)

may be ordered to enhance Tri-Buster’s

performance.

so that it stores in minimal space.

93000 SERIES

Tri-Buster Sign Stand# 93012

Tri-BusterLeg Extending

Leveling Kit# 93000-EXT

Folded Tri-Buster Stand

Dimensions: 4.5”W x 3.25”D x 53”L

# 93012

Tri-Buster optionalRoll -Up Sign Bracket

# 93000-RUB

38 9 4 9 . 3 6 1 . 5 6 6 3

LI

TT

LE

B

US

TE

R®

S

IG

N

ST

AN

D

TrafFix Little Buster® Sign Stand

Designed to hold 30”, 36” and 48” aluminum,

wood, plastic or roll-up signs. All steel

construction with powder coated paint to resist

rusting. Telescoping mast with adjustable rigid

or roll-up sign brackets allow for variable sign

height adjustments. Dual spring mounted base

for added stability during high winds. Step-N-

Drop® legs enable you to set-up in seconds

without having to bend over or stoop down. A

two-position leg adjustment allows all four legs

to be individually adjusted for uneven terrain.

24000 SERIES

9 4 9 . 3 6 1 . 5 6 6 3

Designed to hold

wood, plastic or

construction with

rusting. Telescop

or roll-up sign br

height adjustmen

for added stabilit

Drop® legs enab

without having to

two-position leg

to be individually

Little Buster sign stand with

48”x 48” rigid sign

Little Buster sign stand folds for

compact storage# 24018-RSB


LI

TT

LE

B

US

TE

R®

S

IG

N

ST

AN

D

Approved with Roll-Up Signs, Safe Sign-350 Plastic Signs and with the Safe Sleeve-350 Bracket for .080, .100 and .125 Aluminum Signs or 5/8” Plywood Signs

e Sign-350eve-350

uminum Signs

Now you can be assured you are

in compliance with NCHRP-350

regulations when using .080, .100

and .125 aluminum signs. Just

specify the Little Buster Sign Stand

with Safe Sleeve-350 Rigid Sign

Bracket, to meet the stringent

NCHRP-350 standards.

1. Simply position theLittle Buster stand withStep-N-Drop legs so theSign Side label is facing

2. Place right foot onboth release levers locatedbetween the legs and stepdown. Both legs will fall tothe ground.

of the Little Buster stand,place your left foot on bothrelease levers and step down.The remaining two legswill fall to the ground.

4. Once all four legs are

up on the mast to lock legsin place. Now you know howto do the TrafFix Two-Step.

Instructions for Doing the TrafFix Two-Step

Rigid SignSafe Sleeve-350

Bracket# 24350

Little Buster Sign Stand withSafe Sleeve-350 Bracket for

use with aluminum or plywood signs

# 24018-SSB

40 9 4 9 . 3 6 1 . 5 6 6 3

EC

ON

O

BU

ST

ER

®

SI

GN

S

TA

ND

TrafFix Econo Buster® Sign Stand

Econo Buster® is a lightweight (30 lbs.) yet durable

stand for 36”x 36” and 48”x 48” roll-up or rigid

signs. The telescoping inner mast allows all types

and sizes of signs to be mounted at various heights.

The powder coated paint on the steel legs and

telescoping mast resists rusting. The Step-N-Drop leg

design enables you to set up quickly without having

to bend down or stoop over (no pins to kick, push or

pull). The two position locking leg design allows you

to adjust for uneven terrain.

80000 SERIES

Econo Buster Sign

roll-up sign

Approved with Roll-Up Signs, Safe-Sign™ 350 PlasticSigns and with the Safe Sleeve-350 Bracket for.080 Aluminum signs

9 4

The Safe Sleeve-350 Bracket can be substituted for the standard rigid bracket. This bracket assures compliance withNCHRP-350, when using .080 aluminum construction signs.# 24350

Econo Buster Sign Stand folds for compact storage# 80018-BRU

Econo Buster Sign Stand

# 80018-RSB


AL

UM

IN

UM

B

US

TE

R™

S

IG

N

ST

AN

D

TrafFix Aluminum Buster™ Sign StandLightweight and easy to carry, the Aluminum Buster Sign Stand weighs only 28 pounds. Step-n-Drop® legs minimize exposure time

bending over or stooping down. Designed to hold 30”, 36” and 48” aluminum, wood, plastic or roll-up signs. All aluminum construction resists rusting. Telescoping mast with adjustable rigid or roll-up sign brackets allow for variable sign height adjustments. Dual spring mounted base for added stability during high winds. A two position leg adjustment allows all four legs to be individually adjusted for uneven terrain. Flag holder will accept standard ¼” diameter

70000 SERIES

# 70018-AL

Aluminum Buster Sign

roll up sign# 70018-AL-RSB# 70018-AL-BRU

TrafFix Big Buster® Sign Stand

The Big Buster sign stand has a steel base and two

springs so it can withstand heavy winds as well as severe

wind gusts and air currents created by passing trucks.

The legs and telescoping mast are made of

lightweight aluminum to reduce

carrying weight.

or .080, .100 and .125 aluminum signs 5 feet off

the ground. It can also be used to hold a roll-up sign

7 feet off the ground.

Big Buster comes with the same

Step-N-Drop® leg release system found

on the Econo Buster, Little Buster and

TrafFix stands. A two position leg adjustment

allows all four legs to be individually adjusted

for uneven terrain. A built-in bracket holds

60000 SERIES

Approved with Roll-Up and Safe Sign™ 350 Signs at any height and with .080, .100 and .125 Aluminum or 5/8” Plywood signs at 5’ bottom height

The Big Buster sig

springs so it ca

wind gusts

The leg

ligh

or

the gro

7 feet off t

Big Buster comes

Step-N-Drop® leg rele

on the Econo Buster, Little

TrafFix stands. A two positio

allows all four legs to be ind

for uneven terrain. A built-in

600

Big Buster Sign Stand with 48” x 48” rigid sign 5 feet off

the ground# 60060-RSB

Big Buster Sign Standfolds for compact storage

SET-UP IS A BREEZEWITH BIG BUSTER SIGN STAND

WITH STEP-N-DROP LEGS

42 9 4 9 . 3 6 1 . 5 6 6 3

BI

G

BU

ST

ER

®

SI

GN

S

TA

ND

TrafFix Super Buster® Sign Stand

Super Buster can accommodate a 48”

plywood signs, or .080, .100 and .125 aluminum, plastic or roll-up signs up to 7’ off the ground.* Roll-up signs can be positioned up to 9 feet above road surface.

Super Buster also comes complete withTrafFix Step-N-Drop® leg release system found on all TrafFix four legged sign stands. A two position leg adjustment allows all four legs to be individually adjusted for uneven terrain. The built in

65000 SERIES

leg width# 65084-RSB

Approved with Roll-Up and Safe Sign® 350 Signs at any height and with .080, .100 and .125 Aluminum or 5/8” Plywood signs at 7’ bottom height

Super Buster Sign Stand with 48’’ x 48’’ aluminum sign 7

feet off the ground

The Super Buster Sign Stand has a powder

coated steel base and two heavy duty

springs, designed to withstand strong

winds and severe wind gusts created

lightweight aluminum mast and

legs telescope for compact storage

Super Buster Sign Stand with

which fold for compact storage

leg length


SU

PE

R

BU

ST

ER

®

SI

GN

S

TA

ND

TrafFix® Barrier BusterConcrete Barrier Clamp

29000 SERIES

space is limited.

duty T-pins and hardened steel points.

concrete barrier wall.

concrete barrier wall.

or Big Buster (aluminum) mast, springs and

sign mounting brackets.

manufacturer’s dual vertical coil spring stand

components.

roll-up signs.

# 29012-LBRB

3 holes will accept Little Buster and Big Buster Springs and most other manufacturer’s springs and components # 29012-S 12” Clamp# 29015-S 15” ClampT-pins with hardened steel points secure

stand to concrete barrier wall

44

BA

RR

IE

R

BU

ST

ER

C

LA

MP

9 4 9 . 3 6 1 . 5 6 6 3

Portable Sign Stand Accessories

Three Flag BracketNow you can combine theeconomy of wood or plastic

stand. You can even mount it

brace of any roll-up sign or tothe back of any rigid sign.# 22003-FH

Truck Mounting Bracket for TrafFix Stand

surface. The telescoping arm locks the stand in place while truck is in motion.# 22000-TMB

Truck Mounting Bracket

TrafFix Stand in Truck Mounting Bracket

TrafFix Stand with rigid sign adapter

Rigid Sign AdapterThis single spring adapter converts a TrafFix stand for roll-up signs into a stand that will accommodate a 36”x 36” rigid sign. Simply drop the custom latch bracket connector into the sign stand to lock in place.# 22000-RSA

TrafFix Stand Carrying BagEasy to carry storage bag helps keep the TrafFix Stand free from oil, grease and dirt, whether on the truck or in storage.# 22000-SSB

Safe Sleeve-350This Rigid Sign Mounting Bracket is NCHRP-350 compliant when used with 36”x 36”and 48”x 48”.080 aluminum signs on the Econo and Little Buster Sign Stands.# 24350

TrafFix Rigid Sign Mounting Bracket

# 24321


PO

RT

AB

LE

SIG

N S

TA

ND

AC

CE

SS

OR

IES

Zeph

yr S

ign

Sta

nd

Sign Stand Buyers Guide

Buye

rs G

uide

Traf

Fix

Sig

n S

tand

Traf

Fix

Sig

nS

tand

with

Spr

ing

Alu

min

um

Leg

Sin

gle

Spr

ing

Gro

und

Mou

ntS

ign

Sta

nd

Qua

d D

rop

Sig

n S

tand

Pho

enix

Sig

n S

tand

Tri-B

uste

rS

ign

Sta

ndLi

ttle

Bus

ter

Sig

n S

tand

Econ

o B

uste

rS

ign

Sta

nd

Big

Bus

ter

Sig

n S

tand

Sup

er B

uste

rS

ign

Sta

ndB

arrie

r B

uste

rS

ign

Sta

nd

For u

se w

ith R

oll-U

p Si

gns

For u

se w

ith P

last

ic S

ubst

rate

Sig

ns

For u

se w

ith R

igid

Alu

min

um S

igns

Fo

r use

with

Rig

id W

oode

n Si

gns

For l

ow-m

ediu

m w

ind

spee

ds

For m

ediu

m-h

igh

win

d sp

eeds

Fo

r ver

y hi

gh w

ind

spee

ds

Pow

der C

oate

d St

eel C

onst

ruct

ion

Alum

inum

Con

stru

ctio

n Ru

bber

and

Ste

el C

onst

ruct

ion

NCHR

P-35

0 ap

prov

ed w

ith R

oll-U

p Si

gns

NCHR

P-35

0 ap

prov

ed w

ith P

last

ic S

ubst

rate

Sig

ns

NCHR

P-35

0 ap

prov

ed w

ith .0

80, .

100

& .1

25 A

lum

inum

Sig

ns

NCHR

P-35

0 ap

prov

ed w

ith u

p to

5/8

” thi

ck P

lyw

ood

Sign

s

Aluminum Buster

46

SI

GN

S

TA

ND

B

UY

ER

S

GU

ID

E

9 4 9 . 3 6 1 . 5 6 6 3

Alu

min

um

Bus

ter

Sig

n S

tand

TrafFix Miscellaneous Products

®

®

Alert® Rumble Strip

48 9 4 9 . 3 6 1 . 5 6 6 3

SP

RI

NG

C

ON

E™

TrafFix

in a fraction of the space of traditional highway cones

any scene

1 cubic foot

mesh or diamond plate covering

mesh material with a heavy duty rubber base

spill wind for increased stability

& Tote System

Space Saving Solutions for Temporary Traffic Control


PA

DD

LE

S

AN

D

FL

AG

S

TrafFix Stop/Slow Paddles & Flags

face is made from durable aluminum and

surfaces. The plastic staff with non-skid rubber end cap is detachable for easy storage. Available with 5’ or 6’ two-piece plastic handle or telescoping aluminum handle, adjustable from 4’ to 8’ in height.

hardwood dowel.

lightweight aluminum without any sharp edges.The paddle measures 18’’x18’’ and features a1” diameter hardwood handle. Available in

50 9 4 9 . 3 6 1 . 5 6 6 3

TU

RB

O

FL

AR

E™

TurboFlare™ AA LED Flares

NEW

DOT, public transportation and many more. TurboFlare™ is rugged , reliable and very economical.

storage case


Model 400

TrafFix Barricade and Warning Lights

The Model 400 Barricade Light is

6 or 12 Volt with or without photo electric switch. The lens are made from durable polycarbonate.

The Y2K LED Barricade Light operates on 4 “D” Cell Batteries and will last 4-5 times longer than traditional 6V lantern style lights.

The Econo-Light is the cost-effective solution in barricade lights. It’s available in both 6 and 12 Volts, with

steady burn circuits.

Y2K Econo-Light

The Model 7800 Strobe Light has

pipe, permanent or magnetically mounted. It’s 12 Volt powerproduces 100 candela of light.

Strobe LightModel 7800

Reflective Sheeting and Tapesdurable plastic. This roll of barricade sheeting on plastic can be easily cut to desired lengths and nailed or

when the wood panels are broken.

Pressure sensitive pre-striped bar-ricade sheeting is available in 8’’ and

Channelizer Drum replacement Yellow Caution Tape

comes in Conspicuity Tape is 2’’ wide

red and silver stripes.

51

B

AR

RI

CA

DE

L

IG

HT

S

Volt batteries. It exceeds type “B”

running time is 24 days with Rayovac HD batteries. The LED B-Light is great for school and construction zones.

Model 212Model 630 Model 2006

3 volt “D” cell light, type A, C and 3-way mode. Rugged and durable co-polymer case with breakaway internal candle. Servicing is made easy with a snap-lock case and vertically positioned batteries.

4 high intensity LED’s project 360 degree light pattern. Runs on (2) 6 volt batteries which can power the light for up to 9 months with photocell. Change from steady burn

switch Red Lens made of durable polycarbonate.

NEW

Features:

under Guardrail or Cable Barriers

made from 100% recycled car tires

of chemicals or herbicides for weed control

Mat conforms to contours of uneven ground

tools or equipment required

TrafFix Weed Mat®

Environmentally FriendlyWeed Mat is made from 100% recycled tires. One 48” x 43” Weed

Stop Spraying!Spraying toxic herbicides or chemicals for weed control is not only

Mat eliminates the need to spray for weed control.

52 9 4 9 . 3 6 1 . 5 6 6 3

TR

AF

FI

X

WE

ED

M

AT

®

TrafFix Weed Mat®

# CR4365


TR

AF

FI

X

SA

FE

TY

V

ES

TS

TrafFix Safety VestsCOMFORTABLE ...COMPLIANT...COST EFFECTIVE

Class II Economy Vest# 32115


Class II Supervisors Vest

# 32254

Class II Supervisors Vest

# 32255


ANSI/ISEA 107-2010, Class 2, Level 2 Compliant Safety Vests

Mesh Vest w/ 3/4”

# 32003

Mesh Vest w/ 1-1/2”

# 32022

Non-Compliant Safety Vests

Class III Economy Vest# 32172

Class III Economy Vest# 32173

Class III Supervisors Vest# 32174

Class III Supervisors Vest# 32175

Class E Pants# 32094

Class E Pants# 32095

ANSI/ISEA 107-2010, Class 3, Level 2 Compliant Safety Vests w/Sleeves

ANSI/ISEA 107-2010, Class E Compliant Pants

54 9 4 9 . 3 6 1 . 5 6 6 3

ME

TR

O-

WA

LL

™

TrafFix Metro-Wall™ NEW

(with Customer Supplied Extended Connector Pins)

TrafFix Metro-Wall™ linked together

Stacked for Storage

Connected with Steel Connection Pin

# 45034-O


TR

AF

FI

X

WA

TE

R-

WA

LL

™

TrafFix Water-Wall™

45032 SERIESFeatures:

and breaking

hinge points

between sections

twist-lock plastic cap

sections to be locked together

additional colors available upon request

customer supplied extended connection pins)

30-degree pivoting hinge design allows the TrafFix Water-Wall to handle curved roads.

with coarse buttress thread

Water-Wall can pivot 30-degrees and be locked together with steel connection pins.

Water-Wall stacks for storage and transportation.

# 45032-W

56 9 4 9 . 3 6 1 . 5 6 6 3

SE

NT

RY

™ W

AT

ER

-C

AB

LE

BA

RR

IER

WA

LL

Features:

(820kg) and heavy weight 4,409 lbs (2,000kg) impacts at 45mph (70kph) and 62.5mph (100kph) impacts.

(107cm) tall, 72” (183cm) long and 22.5” (57cm) wide.

galvanized hollow steel T-pin witht a steel keeper at the bottom end.

corrosion resistance. These (4) cables prevent the impacting vehicle from penetrating the barrier wall. At each cable end is a corrosion resistant steel bushing.

The bushing and cable assemblies are integrally molded into the connecting lugs, at four of the lug positions, at each end of the barrier wall.

Sentry™ Water-Cable Barrier Wall

# 45043-O


TrafFix Alert™ RUMBLE STRIP

NEW

Made of 100% Vulcanized Recycled Rubber: Adheres to the roadway at all times, in all conditions and at all speeds. Made from durable, recycled rubber and designed to take heavy highway use. High tech siping and rubber construction provides grip and bonds to the roadway.

Ease of Assembly: Assembles quickly with oneperson without need for any 2”x4” board assistance. Plyable rubber and jigsaw connection provides easy connection of strips. Can be assembled in-line or offset for additional driver awareness. Bi-directional ramp eliminates required orientation of the strip on the roadway.

Ease of Handling: Large handle accomodates a gloved hand for a balanced carry and drop. Jigsaw ends double as handles for easy positioning and dragging. One complete set of 3 strips weighs only 72 lbs. vs competitors 99 lbs.

Disassembly and Transporting: Simply grab the end nearest the shoulder and drag off the road. Easily stack on the truck with the molded-in stacking lugs which stabilize the TrafFix Alert during transport.

Alerts drivers to temporary work zones,

Construction: Three 44” long x 12” wide rumble

Three of these 11’ long rumble strips are spaced evenly to alert drivers to the upcoming work zone or safety checkpoint. Full 1’ thickness x 12” widthdeliver better sensory awareness to the motorist.

Color: The TrafFix Alert comes in Black, Orange or

to the motorist.

TR

AF

FI

X

AL

ER

T™

to the motorist.

gemma_000

Typewritten Text

Gonneville Inc. 211 Calle Pintoresco Suite A San Clemente, CA 92672 877-246-8015 [email protected] www.gonneville.com

produc t guide - gonneville inc....is the “sandless” way to ballast channelizer drums. the...

Documents