pro:dec - material recovery |cdenviro · the pro:dec removes the particles that cause wear. it...
TRANSCRIPT
PRO:DECFine Grit Removal System
The PRO:DEC will remove solids from any waste stream enhancing overall process efficiency and regulating flow to the final sludge treatment system.
Performance
Built to last
Return on Investment
Safety
Environment
RapidDeployment
Efficiency
Performance 04
06
08
10
12
14
16
Built to Last
Return on Investment
Safety
Environment
Rapid Deployment
Efficiency
The PRO:DEC removes the particles that cause wear. It efficiently removes grit to protect decanter scroll tips, filter cloths and other downstream processes from attrition and wear.
0504
Performance
Performance The PRO:DEC is a cost effective and efficient sludge degritting system that will minimise abrasion and deposition problems in wastewater processes.
Return on Investment
Return on InvestmentReduced solids passing through pumps, tanks and centrifuges reduces wear and the requirement for unnecessary maintenance.
The PRO:DEC reduces maintenance costs and increases operational uptime in the entire process, not just at one stage.
Maximum dewatering of the sand and grit fraction ensures ease of handling and a product that is instantly ready for use.
0706
Recovered grit is a recycled material with many opportunities for re-use including pipe bedding and landscaping.
Environment
EnvironmentBy introducing the PRO:DEC to the treatmentprocess, operators can significantly reduce the carbon footprint of their entire system.
0908
Efficiency
EfficiencyTreated water is held in the onboard buffer tank which ensures a homogenous supply to the decanter or filter press. The flow rate is flexible and sized to suit each application, increasing the efficiency of the entire operation.
The PRO:DEC grit separation system ensures the efficient removal of +75micron from the waste stream.
1110
BS 5395-3 stairs and walkways ensure easy, safe access for inspection.
Wastewater/Sludge feed inlet
Dewatered grit falls from chute
The PRO:DEC ensures a consistent, controlled flow of waste water to the next processing phase.
A mounted external pump is located above ground providing easy acces to the pump and the motor for maintenance.
Onboard buffer tank
1312
Built to last
Built to LastHighest specification components used throughout to ensure system longevity.
Polyurethane mats on the dewatering screen guarantee maximum wear protection.
Rosta mounts ensure optimumdewatering of material on the screen.
Safety
Safety
Ultrasonic sensors monitor the critical system parameters to ensure uptime and efficient processing and prevent flooding.
BS 5395-3 stairs and walkways ensure easy, safe access for inspection.
The PRO:DEC has been designed to improve health and safety in daily operations, plant inspections and routine maintenance.
1514
RapidDeployment
Rapid DeploymentThe PRO:DEC can be quickly and easily retrofitted to an existing water treatment system. This offers operators increased efficiencies with minimal interruption to their process.
The PRO:DEC is delivered to site in one container, minimising transportation costs and installation time.
1716
Equipment Specifications
*Specifications may change due to manufacturing updates or with the addition of our ‘optional extras’18
*Maximum Capacity
*Water requirement
*Power Requirement
Weight
*Dimensions
PRO:DEC 7.5m 3.7m 3.2m
Length Width Height
PRO:DEC
22 l/s at 6%DS
Up to 11 l/s
40-70kW
8 t
1919
Notes
19
CDEnviroCookstown, County Tyrone, BT80 9DG, Northern IrelandT: +44 28 8676 7900F: +44 28 8676 1414
cdenviro.com